ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS   FIRST START-UP FREE Technical Features Model : OMNIA S 3.2 16 Product Code : 0XHTGSWA Command included Optional accessories CONNECT CRP remote control Performance   Heating Useful power in heating with water set at 35° C: 15.9 kW Useful power in heating with water set at 45° C: 16.0 kW Useful power in heating with water set at 55° C: 16.0 kW Power absorbed with water set at 35°C: 3.53 kW Power absorbed with water set at 45° C: 4.57 kW Power absorbed with water set at 55°C: 5.61 kW Water flow rate with water set at 35°C: 2735 l/h Water flow rate with water set at 45°C: 2752 /h Water flow rate with water set at 55°C: 1720 l/h Cooling Useful power in cooling with water set at 7 °C: 14.0 kW Useful power in cooling with water set at 18 °C: 13.6 kW Power absorbed with water set at 7° C: 5.60 kW Power absorbed with water set at 18°C: 3.77 kW Water flow rate with water set at 7°C: 2408 l/h Water flow rate with water set at 18°C: 2563 l/h Technical data of external unit Compressor type : Twin Rotary DC Number of compressors : 1 Number of refrigeration circuits: 1 Fan type : DC Axial Number of fans: 1 Sound power level in heating mode : 56 ~ 69 dB(A) Sound power level in cooling : 56 ~ 69 dB(A) Liquid pipe diameter: 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Maximum pipe length: 30 m Maximum pipe height difference: 20 m Technical data of the internal unit Exchanger type: Brazed stainless steel plates Expansion vessel volume: 10 litres Water safety valve calibration: 3 bar Minimum system water content: 40 litres System pipe diameter: 1" gas F Diameter of ACS pipes: 3/4" gas F Liquid pipe diameter: 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Electrical Data Power supply (V,Hz,Ø) : 220~240/50/1 Refrigerant gas: R32 Dimensions and Weight External unit dimensions (WxHxD): 1118x865x523 mm External unit weight: 96.0 Kg Internal unit dimensions (WxHxD): 595x1860x700 mm 5 years without worries Ferroli OMNIA ST 3.2 Reversible air-water heat pumps for split installation, with integrated DHW storage Efficiency meets comfort for integrated storage OMNIA ST 3.2 is the evolution of OMNIA S 3.2 and is part of the new range of Full Inverter R32 split heat pumps by Ferroli. When we talk about “split” we mean that the refrigeration circuit is divided between the two units, the external one and the internal one. The external unit contains the heart of the refrigeration circuit, from the compressor to the fan with the air side exchanger, which is connected with the refrigerant gas pipes to the internal unit. The internal unit contains the heart of the generator's hydraulic circuit with all the main pre-installed components, such as the high-efficiency circulator and the expansion vessel, to allow for safe, practical and fast installation. The OMNIA ST 3.2 differs from the OMNIA S 3.2 in having an accumulation tank for Domestic Hot Water integrated directly into the internal unit. This accumulation is 190L for sizes 4 to 10, while it is 240L for the larger ones, from 12 to 16T. But not only that, OMNIA ST 3.2 can be customized according to your needs, with an 18L inertial kit, a kit for solar integration on the accumulation or with a kit for the management of 2 different zones, classic direct and mixed, in case we need 2 different temperatures on the terminals in the house Thanks to its wide operating range , among the widest on the market, OMNIA ST 3.2 works down to -25°C external and produces hot water up to 65°C in nominal conditions. The new Full Inverter concept by Ferroli uses DC inverter modulations on the 3 main energy-intensive components of the machine, namely compressor, fan and pump. This allows the power supplied to be modulated by finely tracking the thermal load and allowing the user very high efficiencies and significant energy savings . Furthermore, the Full Inverter concept by Ferroli allows the inrush currents to be reduced, avoiding surges in the network and guaranteeing a longer useful life for the components. With noise levels among the lowest on the market , OMNIA ST 3.2 is able to satisfy all system requirements, but can easily be integrated with a Ferroli boiler . The internal unit, the heart of the hydraulic distribution If the external unit contains the heart of the refrigeration circuit, the Internal Unit contains the heart of the hydraulic circuit. OMNIA ST 3.2 is much more than an exchanger with a pump. The hydronic module includes all the main components of the system and can be customized according to the user's needs. Stainless steel plate exchanger, pressure gauge and pressure sensors, expansion vessel, safety valve, automatic vent and brushless DC circulator are just some of the components you will find inside The control system The User Interface has been equipped with Capsense technology with 2.8” graphic display, which allows the user to interact with the product in an easy and extremely simple way Modbus protocol It can be interfaced with BMS/BACS automation and management systems Heating and cooling Full Inverter modulation finely follows the desired setpoints, with the possibility of setting climatic curves in heating and cooling, further optimising the user's consumption Domestic hot water production When the DHW Temperature probe calls the machine it automatically diverts to the domestic hot water boiler with a dedicated DHW Setpoint. 3-way diverter valve supplied as standard Smart Grid Inputs from photovoltaic and grid Digital Smart Grid inputs for managing an input from a photovoltaic system and from the electricity grid. These allow you to optimise consumption and costs on your bill Electric heating element for ACS boiler The ACS electric integration serves as an integration, anti-legionella or reserve source in the event of an anomaly Fast ACS Priority to DHW production to bring the boiler to the setpoint in the shortest possible time Anti-legionella function Allows you to set weekly anti-legionella cycles Silent mode Reduces the compressor frequency and fan speed, thus significantly reducing noise. Programmable on time slots ON/OFF From external contact. Activation and deactivation via an external contact, for example from a zone thermostat Hot / cold From external contacts. Summer/winter switching signal from outside, e.g. from the zone thermostat ECO function Dedicated setpoint for “ Eco ” operation. Can be set with daily time slot Antifreeze protection Heat pump operation in heating mode with circulator ON and possible electric booster The brand new Connect CRP and Connect CRP Zone The on-board interface communicates easily with the new intelligent Connect CRP systems, which can manage up to 8 thermostats divided into 2 zones, one direct and one mixed . Connect CRP is the brand new remote controller accessible via APP , available for both iOS and Android . The Connect CRP Zone is a zone thermostat that communicates via RF with the Connect CRP. It can be inserted into a classic 502 box, or left stand-alone on its practical table feet. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : NIMBUS POCKET M NET 35 Product code : 3301870 Sensys HD as standard Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating External air temperature -7°C - Water temperature 30/35°C Nonimal thermal power: 3.51 kW Absorbed electrical power: 1.13 kW COP: 3.10 External air temperature 7°C - Water temperature 30/35°C Normal thermal power: 3.50 kW Absorbed electrical power: 0.69 kW COP: 5.10 External air temperature 7°C - Water temperature 40/45°C Thermal power: 3.00 kW Absorbed electrical power: 0.80 kW COP: 3.74 Cooling External air temperature 35°C - Water temperature 7°/12°C Nonimal cooling capacity: 3.50 kW Absorbed electrical power: 1.03 kW EER: 3.40 External air temperature 35°C - Water temperature 18°/23°C Normal cooling capacity: 4.08 kW Absorbed electrical power: 0.77 kW EER: 5.29 Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Plumber's Pipe Diameter: 1" inch Male Dimensions and weight Dimensions (WxHxD): 1016x756x374 mm Empty weight: 66.0 kg Ariston Nimbus Pocket M Net heat pump Heat pump for hot, cold and domestic hot water functions High efficiency packaged inverter heat pump capable of heating and cooling the environment. Thanks to optimal energy management, maximum performance efficiency is guaranteed at any outside temperature. POCKET I do not include the hydraulic module for a space-saving as much as possible. Optimized performance The innovative Energy Manager technology manages the entire hardware and software system, ensuring stable performance at any external temperature and the lowest noise level in its category Total efficiency High levels of efficiency across the entire range for both heating and cooling functions. Already prepared for energy labeling A+++ for heating Built-in connectivity The Ariston NET App allows you to control the heating, cooling and hot water functions directly from your smartphone and provides 24-hour assistance 360° control Through the interface of the integrated Sensys NET system it is possible to effectively control multiple zones, also integrating renewable solar energy, both thermal and photovoltaic, and auxiliary generators Quality 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. 100% BUILT TO LAST Strong and super resistant materials, components and products developed to perform in extreme conditions to deliver high-level results with maximum durability Totally safe Designed with the most modern technology and built with selected materials, Ariston heat pumps are totally safe Advantages Inverter packaged heat pump R32 ecological gas COP up to 5.1 Quietness, up to 53 dB(A) Power range from 1.7 to 17.7 kW Sensys HD as standard Light Box electrical box that can also be installed outdoors Plug & Play solution Back up electrical resistance available as an accessory WI-FI connectivity as standard Remote management with the Ariston NET app Optional 24/7 teleassistance Photovoltaic function Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : NIMBUS POCKET M NET 50 Product code : 3301871 Sensys HD as standard Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating External air temperature -7°C - Water temperature 30/35°C Nonimal thermal power: 5.00 kW Absorbed electrical power: 1.72 kW COP : 2.90 External air temperature 7°C - Water temperature 30/35°C Normal thermal power: 5.00 kW Absorbed electrical power: 1.00 kW COP : 5.00 External air temperature 7°C - Water temperature 40/45°C Thermal power: 4.05 kW Absorbed electrical power: 1.11 kW COP: 3.65 Cooling External air temperature 35°C - Water temperature 7°/12°C Nonimal cooling capacity: 5.00 kW Absorbed electrical power: 1.75 kW EER: 2.85 External air temperature 35°C - Water temperature 18°/23°C Nonimal cooling capacity: 4.63 kW Absorbed electrical power: 1.02 kW EER: 4.56 Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Plumber's Pipe Diameter: 1" inch Male Dimensions and weight Dimensions (WxHxD): 1016x756x374 mm Empty weight: 66.0 kg Ariston Nimbus Pocket M Net heat pump Heat pump for hot, cold and domestic hot water functions High efficiency packaged inverter heat pump capable of heating and cooling the environment. Thanks to optimal energy management, maximum performance efficiency is guaranteed at any outside temperature. POCKET I do not include the hydraulic module for a space-saving as much as possible. Optimized performance The innovative Energy Manager technology manages the entire hardware and software system, ensuring stable performance at any external temperature and the lowest noise level in its category Total efficiency High levels of efficiency across the entire range for both heating and cooling functions. Already prepared for energy labeling A+++ for heating Built-in connectivity The Ariston NET App allows you to control the heating, cooling and hot water functions directly from your smartphone and provides 24-hour assistance 360° control Through the interface of the integrated Sensys NET system it is possible to effectively control multiple zones, also integrating renewable solar energy, both thermal and photovoltaic, and auxiliary generators Quality 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. 100% BUILT TO LAST Strong and super resistant materials, components and products developed to perform in extreme conditions to deliver high-level results with maximum durability Totally safe Designed with the most modern technology and built with selected materials, Ariston heat pumps are totally safe Advantages Inverter packaged heat pump R32 ecological gas COP up to 5.1 Quietness, up to 53 dB(A) Power range from 1.7 to 17.7 kW Sensys HD as standard Light Box electrical box that can also be installed outdoors Plug & Play solution Back up electrical resistance available as an accessory WI-FI connectivity as standard Remote management with the Ariston NET app Optional 24/7 teleassistance Photovoltaic function Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : NIMBUS POCKET M NET 80 Product code : 3301872 Sensys HD as standard Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating External air temperature -7°C - Water temperature 30/35°C Nonimal thermal power: 7.41 kW Absorbed electrical power: 2.47 kW COP : 3.00 External air temperature 7°C - Water temperature 30/35°C Thermal power: 8.00 kW Absorbed electrical power: 1.67 kW COP: 4.80 External air temperature 7°C - Water temperature 40/45°C Normal thermal power: 6.00 kW Absorbed electrical power: 1.62 kW COP: 3.70 Cooling External air temperature 35°C - Water temperature 7°/12°C Nonimal cooling capacity: 7.00 kW Absorbed electrical power: 2.26 kW EER: 3.10 External air temperature 35°C - Water temperature 18°/23°C Nonimal cooling capacity: 7.00 kW Absorbed electrical power: 1.49 kW EER: 4.70 Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Plumber's Pipe Diameter: 1" inch Male Dimensions and weight Dimensions (WxHxD): 1016x1106x374 mm Empty weight: 91.0 kg Ariston Nimbus Pocket M Net heat pump Heat pump for hot, cold and domestic hot water functions High efficiency packaged inverter heat pump capable of heating and cooling the environment. Thanks to optimal energy management, maximum performance efficiency is guaranteed at any outside temperature. POCKET I do not include the hydraulic module for a space-saving as much as possible. Optimized performance The innovative Energy Manager technology manages the entire hardware and software system, ensuring stable performance at any external temperature and the lowest noise level in its category Total efficiency High levels of efficiency across the entire range for both heating and cooling functions. Already prepared for energy labeling A+++ for heating Built-in connectivity The Ariston NET App allows you to control the heating, cooling and hot water functions directly from your smartphone and provides 24-hour assistance 360° control Through the interface of the integrated Sensys NET system it is possible to effectively control multiple zones, also integrating renewable solar energy, both thermal and photovoltaic, and auxiliary generators Quality 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. 100% BUILT TO LAST Strong and super resistant materials, components and products developed to perform in extreme conditions to deliver high-level results with maximum durability Totally safe Designed with the most modern technology and built with selected materials, Ariston heat pumps are totally safe Advantages Inverter packaged heat pump R32 ecological gas COP up to 5.1 Quietness, up to 53 dB(A) Power range from 1.7 to 17.7 kW Sensys HD as standard Light Box electrical box that can also be installed outdoors Plug & Play solution Back up electrical resistance available as an accessory WI-FI connectivity as standard Remote management with the Ariston NET app Optional 24/7 teleassistance Photovoltaic function Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : NIMBUS POCKET M NET 120 Product code : 3301874 Sensys HD as standard Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating External air temperature -7°C - Water temperature 30/35°C Nonimal thermal power: 9.51 kW Absorbed electrical power: 2.97 kW COP: 3.20 External air temperature 7°C - Water temperature 30/35°C Thermal power: 12.00 kW Absorbed electrical power: 2.45 kW COP: 4.90 External air temperature 7°C - Water temperature 40/45°C Normal thermal power: 8.20 kW Absorbed electrical power: 2.00 kW COP: 4.10 Cooling External air temperature 35°C - Water temperature 7°/12°C Nonimal cooling capacity: 9.05 kW Absorbed electrical power: 2.87 kW EER: 3.15 External air temperature 35°C - Water temperature 18°/23°C Normal cooling capacity: 10.74 kW Absorbed electrical power: 2.11 kW EER: 5.08 Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Plumber's Pipe Diameter: 1" inch Male Dimensions and weight Dimensions (WxHxD): 1016x1506x374 mm Empty weight: 124.0 kg Ariston Nimbus Pocket M Net heat pump Heat pump for hot, cold and domestic hot water functions High efficiency packaged inverter heat pump capable of heating and cooling the environment. Thanks to optimal energy management, maximum performance efficiency is guaranteed at any outside temperature. POCKET I do not include the hydraulic module for a space-saving as much as possible. Optimized performance The innovative Energy Manager technology manages the entire hardware and software system, ensuring stable performance at any external temperature and the lowest noise level in its category Total efficiency High levels of efficiency across the entire range for both heating and cooling functions. Already prepared for energy labeling A+++ for heating Built-in connectivity The Ariston NET App allows you to control the heating, cooling and hot water functions directly from your smartphone and provides 24-hour assistance 360° control Through the interface of the integrated Sensys NET system it is possible to effectively control multiple zones, also integrating renewable solar energy, both thermal and photovoltaic, and auxiliary generators Quality 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. 100% BUILT TO LAST Strong and super resistant materials, components and products developed to perform in extreme conditions to deliver high-level results with maximum durability Totally safe Designed with the most modern technology and built with selected materials, Ariston heat pumps are totally safe Advantages Inverter packaged heat pump R32 ecological gas COP up to 5.1 Quietness, up to 53 dB(A) Power range from 1.7 to 17.7 kW Sensys HD as standard Light Box electrical box that can also be installed outdoors Plug & Play solution Back up electrical resistance available as an accessory WI-FI connectivity as standard Remote management with the Ariston NET app Optional 24/7 teleassistance Photovoltaic function Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS OPTIONAL START! Technical Features Model : AU052FYCRA(HW) Commercial code: 25023005Z Surface area: Up to 80 m 2 YR-E27A control as standard Y-filter as standard Heating LWT 35°C ~ OAT 7°C Power output: 5.00 kW Power consumption: 0.99 kW COP : 5.05 Heating LWT 55°C ~ OAT 7°C Power output: 5.00 kW Power consumption: 1.64 kW COP : 3.05 Energy efficiency Heating with average water flow temperature at 35°C SCOP : 4.59 ηs : 180% Energy class: A+++ Heating with average water flow temperature at 55°C SCOP : 3.32 ηs : 130% Energy class: A++ Cooling LWT 7°C ~ OAT 35°C Power output: 5.00 kW Power consumption: 1.56 kW EER: 3.20 Cooling LWT 18°C ​​~ OAT 35°C Power output: 5.00 kW Power consumption: 1.00 kW EER : 5.00 Performance Water flow rate: 14.3 l/min Minimum water content of the system: 30 litres Sound power: 61 dB(A) Internal water pump model: Wilo External temperature operating limits Heating : -25°C ~ 35°C Cooling : 10°C ~ 46°C Water delivery temperature range Heating : 25°C ~ 60°C Cooling : 5°C ~ 20°C Electrical data Power supply (V,Hz,Ø) : 220~240/50/1 Refrigerant gas: R32 Installation data Diameter of liquid inlet/outlet pipes: 3/4" F Dimensions and weight Net dimensions (WxDxH): 920x372x760 mm Net weight: 69.0 Kg Gross dimensions (WxDxH): 1045x488x875 mm Gross weight: 80.0 Kg Haier Super Acqua Monobloc R-32 Air-to-Water Heat Pump Super Acqua is the new Haier monobloc air/water heat pump , reversible, high efficiency , with DC inverter compressors, DC brushless fans, and DC inverter circulator. The Haier Super Acqua monoblock heat pump has been designed for residential and commercial applications and is set up for: Winter heating Summer cooling Production of domestic hot water All the advantages of a heat pump system In a period of energy price increases like the one we are experiencing, the presence of a heat pump system in the home can help a lot in terms of savings. The heat pump works on the basis of a heat exchange process between environments with different temperatures: the machine obtains energy from the air or from the subsoil or from water and returns it to the internal environment through the heat exchanger. The energy produced by a heat pump can be used to heat or cool rooms but also to produce hot water. Heat pumps are considered a cost-effective choice because they can produce up to 5 kWh of thermal energy with 1 kWh of electrical energy, so the energy you get is more than you use. In addition to the indisputable economic advantages, linked to the greater energy efficiency, a heat pump system requires less maintenance, since no fuel oil or gas is burned inside it. Finally, from the point of view of environmental impact, the heat pump can certainly be said to be more sustainable because no CO₂ emissions caused by the combustion of fossil raw materials are produced. The advantages of heat pumps are therefore varied and are even more evident in Haier's Super Water-Air heat pumps, monoblock and split , which guarantee maximum comfort. Maximum comfort with the Super Acqua heat pump Haier's Super Acqua heat pump ensures maximum comfort thanks to: - Fast and comfortable heating - Remote control YR-E27 / YR-E27A as standard , which allows optimal management of energy flows, as well as easy control of the various operating parameters of the machine - Minimum noise level with "Quiet" operating mode - Domestic hot water (DHW) regulation and "Turbo" mode to reach the water temperature set point in the shortest possible time - Predefined time programs with differentiated switch-ons and/or switch-offs for working days and weekends Haier Super Acqua heat pump installation: easy and fast! Haier's Super Acqua monoblock heat pump , with its integrated heat exchanger , does not require the connection of gas pipes. The integrated hydraulic circuit is equipped with a high efficiency Inverter circulator. Also included as standard: • Expansion valve • Differential flow switch • Safety valve to ensure the stability of the hydronic system • 4-way valve for reversing the refrigeration cycle The compact size allows for installation even in small spaces . Safety first On the safety side, in addition to the water overpressure valve installed inside , there are also pressure sensors and switches on the gas side . Furthermore, the flow switch (or differential pressure switch) and the continuous monitoring of the inlet-outlet water temperatures ensure that the unit always works with the correct flow rate, avoiding malfunctions or, worse, damage to components. There is also a dedicated “ antifreeze ” logic: if the external temperature and water conditions require it, the internal pump will be activated and if necessary also the compressor, to bring the water back to temperatures far from freezing. Top performance in all seasons The heating performance guaranteed up to -20°C external temperature makes the Super Acqua heat pump suitable for installation in any climate zone, even those with the most severe conditions. The temperature sensors provided ensure that, in case of temperatures below 0°C, the compressor and pump are constantly operating to avoid possible freezing. The 5 kW heat pump size guarantees its performance up to -25°C of external temperature Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS OPTIONAL START! Technical Features Model : AU082FYCRA(HW) Commercial code: 25023008Z Surface area: Up to 100 m 2 YR-E27 control as standard Y-filter as standard Heating LWT 35°C ~ OAT 7°C Power output: 7.80 kW Power consumption: 1.77 kW COP : 4.40 Heating LWT 55°C ~ OAT 7°C Power output: 7.01 kW Power consumption: 2.76 kW COP : 2.54 Energy efficiency Heating with average water flow temperature at 35°C SCOP : 3.87 ηs : 152% Energy class: A++ Heating with average water flow temperature at 55°C SCOP: 2.90 ηs : 113% Energy class: A+ Cooling LWT 7°C ~ OAT 35°C Power output: 5.50 kW Power consumption: 2.34 kW EER: 2.35 Cooling LWT 18°C ​​~ OAT 35°C Power output: 7.00 kW Power consumption: 1.89 kW EER : 3.70 Performance Water flow rate: 23.0 l/min Minimum water content of the system: 40 litres Sound power: 64 dB(A) Internal water pump model: Wilo External temperature operating limits Heating : -20°C ~ 35°C Cooling : 10°C ~ 46°C Water delivery temperature range Heating : 25°C ~ 55°C Cooling : 5°C ~ 20°C Electrical data Power supply (V,Hz,Ø) : 220~240/50/1 Refrigerant gas: R32 Installation data Liquid inlet/outlet pipe diameter: 1" F Dimensions and weight Net dimensions (WxDxH): 950x370x970 mm Net weight: 87.0 Kg Gross dimensions (WxDxH): 1010x480x1108 mm Gross weight: 97.0 Kg Haier Super Acqua Monobloc R-32 Air-to-Water Heat Pump Super Acqua is the new Haier monobloc air/water heat pump , reversible, high efficiency , with DC inverter compressors, DC brushless fans, and DC inverter circulator. The Haier Super Acqua monoblock heat pump has been designed for residential and commercial applications and is set up for: Winter heating Summer cooling Production of domestic hot water All the advantages of a heat pump system In a period of energy price increases like the one we are experiencing, the presence of a heat pump system in the home can help a lot in terms of savings. The heat pump works on the basis of a heat exchange process between environments with different temperatures: the machine extracts energy from the air or from the subsoil or from water and returns it to the internal environment through the heat exchanger. The energy produced by a heat pump can be used to heat or cool rooms but also to produce hot water. Heat pumps are considered a cost-effective choice because they can produce up to 5 kWh of thermal energy with 1 kWh of electrical energy, so the energy you get is more than you use. In addition to the indisputable economic advantages, linked to the greater energy efficiency, a heat pump system requires less maintenance, since no fuel oil or gas is burned inside it. Finally, from the point of view of environmental impact, the heat pump can certainly be said to be more sustainable because no CO₂ emissions caused by the combustion of fossil raw materials are produced. The advantages of heat pumps are therefore varied and are even more evident in Haier's Super Water-Air heat pumps, monoblock and split , which guarantee maximum comfort. Maximum comfort with the Super Acqua heat pump Haier's Super Acqua heat pump ensures maximum comfort thanks to: - Fast and comfortable heating - Remote control YR-E27 / YR-E27A as standard , which allows optimal management of energy flows, as well as easy control of the various operating parameters of the machine - Minimum noise level with "Quiet" operating mode - Domestic hot water (DHW) regulation and "Turbo" mode to reach the water temperature set point in the shortest possible time - Predefined time programs with differentiated switch-ons and/or switch-offs for working days and weekends Haier Super Acqua heat pump installation: easy and fast! Haier's Super Acqua monoblock heat pump , with its integrated heat exchanger , does not require the connection of gas pipes. The integrated hydraulic circuit is equipped with a high efficiency Inverter circulator. Also included as standard: • Expansion valve • Differential flow switch • Safety valve to ensure the stability of the hydronic system • 4-way valve for reversing the refrigeration cycle The compact size allows for installation even in small spaces . Safety first On the safety side, in addition to the water overpressure valve installed inside , there are also pressure sensors and switches on the gas side . Furthermore, the flow switch (or differential pressure switch) and the continuous monitoring of the inlet-outlet water temperatures ensure that the unit always works with the correct flow rate, avoiding malfunctions or, worse, damage to components. There is also a dedicated “ antifreeze ” logic: if the external temperature and water conditions require it, the internal pump will be activated and if necessary also the compressor, to bring the water back to temperatures far from freezing. Top performance in all seasons The heating performance guaranteed up to -20°C external temperature makes the Super Acqua heat pump suitable for installation in any climate zone, even those with the most severe conditions. The temperature sensors provided ensure that, in case of temperatures below 0°C, the compressor and pump are constantly operating to avoid possible freezing. The 5 kW heat pump size guarantees its performance up to -25°C of external temperature Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS OPTIONAL START! Technical Features Model : AU112FYCRA(HW) Commercial code: 25023012Z Surface area: Up to 160 m 2 YR-E27 control as standard Y-filter as standard Heating LWT 35°C ~ OAT 7°C Power output: 11.00 kW Power consumption: 2.61 kW COP : 4.22 Heating LWT 55°C ~ OAT 7°C Power output: 9.99 kW Power consumption: 4.40 kW COP : 2.27 Energy efficiency Heating with average water flow temperature at 35°C SCOP : 4.35 ηs : 171% Energy class: A++ Heating with average water flow temperature at 55°C SCOP : 3.20 ηs : 125% Energy class: A++ Cooling LWT 7°C ~ OAT 35°C Power output: 11.50 kW Power consumption: 3.83 kW EER: 3.00 Cooling LWT 18°C ​​~ OAT 35°C Power output: 13.50 kW Power consumption: 2.94 kW EER : 4.60 Performance Water flow rate: 31.5 l/min Minimum system water content: 55 litres Sound power: 67 dB(A) Internal water pump model : Grundfos External temperature operating limits Heating : -20°C ~ 35°C Cooling : 10°C ~ 46°C Water delivery temperature range Heating : 25°C ~ 55°C Cooling : 5°C ~ 20°C Electrical data Power supply (V,Hz,Ø) : 220~240/50/1 Refrigerant gas: R32 Installation data Liquid inlet/outlet pipe diameter: 1" F Dimensions and weight Net dimensions (WxDxH): 950x370x1500 mm Net weight: 145.0 Kg Gross dimensions (WxDxH): 1010x480x1638 mm Gross weight: 157.0 Kg Haier Super Acqua Monobloc R-32 Air-to-Water Heat Pump Super Acqua is the new Haier monobloc air/water heat pump , reversible, high efficiency , with DC inverter compressors, DC brushless fans, and DC inverter circulator. The Haier Super Acqua monoblock heat pump has been designed for residential and commercial applications and is set up for: Winter heating Summer cooling Production of domestic hot water All the advantages of a heat pump system In a period of energy price increases like the one we are experiencing, the presence of a heat pump system in the home can help a lot in terms of savings. The heat pump works on the basis of a heat exchange process between environments with different temperatures: the machine obtains energy from the air or from the subsoil or from water and returns it to the internal environment through the heat exchanger. The energy produced by a heat pump can be used to heat or cool rooms but also to produce hot water. Heat pumps are considered a cost-effective choice because they can produce up to 5 kWh of thermal energy with 1 kWh of electrical energy, so the energy you get is more than you use. In addition to the indisputable economic advantages, linked to the greater energy efficiency, a heat pump system requires less maintenance, since no fuel oil or gas is burned inside it. Finally, from the point of view of environmental impact, the heat pump can certainly be said to be more sustainable because no CO₂ emissions caused by the combustion of fossil raw materials are produced. The advantages of heat pumps are therefore varied and are even more evident in Haier's Super Water-Air heat pumps, monoblock and split , which guarantee maximum comfort. Maximum comfort with the Super Acqua heat pump Haier's Super Acqua heat pump ensures maximum comfort thanks to: - Fast and comfortable heating - Remote control YR-E27 / YR-E27A as standard , which allows optimal management of energy flows, as well as easy control of the various operating parameters of the machine - Minimum noise level with "Quiet" operating mode - Domestic hot water (DHW) regulation and "Turbo" mode to reach the water temperature set point in the shortest possible time - Predefined time programs with differentiated switch-ons and/or switch-offs for working days and weekends Haier Super Acqua heat pump installation: easy and fast! Haier's Super Acqua monoblock heat pump , with its integrated heat exchanger , does not require the connection of gas pipes. The integrated hydraulic circuit is equipped with a high efficiency Inverter circulator. Also included as standard: • Expansion valve • Differential flow switch • Safety valve to ensure the stability of the hydronic system • 4-way valve for reversing the refrigeration cycle The compact size allows for installation even in small spaces . Safety first On the safety side, in addition to the water overpressure valve installed inside , there are also pressure sensors and switches on the gas side . Furthermore, the flow switch (or differential pressure switch) and the continuous monitoring of the inlet-outlet water temperatures ensure that the unit always works with the correct flow rate, avoiding malfunctions or, worse, damage to components. There is also a dedicated “ antifreeze ” logic: if the external temperature and water conditions require it, the internal pump will be activated and if necessary also the compressor, to bring the water back to temperatures far from freezing. Top performance in all seasons The heating performance guaranteed up to -20°C external temperature makes the Super Acqua heat pump suitable for installation in any climate zone, even those with the most severe conditions. The temperature sensors provided ensure that, in case of temperatures below 0°C, the compressor and pump are constantly operating to avoid possible freezing. The 5 kW heat pump size guarantees its performance up to -25°C of external temperature Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical Features Model : i-BX-N010M Item code : 401475 On-board control included Cooling Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 9.9 kW Absorbed electrical power: 3.64 kW EER : 2.72 ESEER : 4.21 Values ​​referred to the EN14511 regulation Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 9.91 kW EER : 2.73 ESEER : 4.26 Class : C Heating Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 11.0 kW Electrical power consumption: 3.65 kW COP : 3.01 Values ​​referred to the EN14511 regulation Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 11.0 kW COP : 3.02 Class : B Energy Efficiency in Cooling SEER : 4.37 Efficiency ηs : 172 % Energy Efficiency in Low Temperature Heating PDesign : 8.18 kW SCOP : 3.54 Efficiency ηs : 139 % Seasonal efficiency class: A+ Energy Efficiency in Medium Temperature Heating PDesign : 8.54 kW SCOP : 2.82 Efficiency ηs : 110 % Seasonal efficiency class: A+ Performance Cooling Exchanger water flow rate: 0.47 m3 /h Pump useful head: 57.7 kPa Sound power level: 69 dB(A) Sound pressure: 54 dB(A) Heating Exchanger water flow rate: 0.53 m3 /h Pump useful head: 54.1 kPa Sound power level: 69 dB(A) Sound pressure: 54 dB(A) Electrical Data Power supply (V,Hz,Ø) : 220~240/50/1 Refrigerant gas: R-410 Operating limits Heating Outside air temperature: -20°C ~ 45°C Inlet water temperature: 24°C~ 60°C Cooling Outside air temperature : -10°C ~ 46°C Inlet water temperature: -8°C ~ 20°C Dimensions and Weight Dimensions (LxWxH): 900x420x1240 mm Empty weight: 115.0 Kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of providing heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single-circuit configuration using R410A refrigerant, air-side exchange battery with copper pipes and aluminum fins, water-side exchanger with brazed plates. The unit is equipped with an electronic expansion valve and integrated hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to accurate thermoregulation combined with the use of inverter technology. The accurate design and use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are synergistically regulated according to proprietary logics to maximize the unit's efficiencies. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology that guarantees the exact energy corresponding to the real needs of the building. High efficiency that translates into reduced energy consumption throughout the working period of the unit. Comfort applications Residential buildings Commercial premises Infrastructures for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems can be created with cascade systems ErP Ready Thanks to inverter technology, i-BX-N complies with the ErP directive, exceeding the minimum seasonal energy efficiency requirements in heating, SCOP, for both low temperature and medium temperature applications. Silent operation : Noise emissions are reduced thanks to the modulation of the compressor frequency and fan speed Reduced consumption : The dynamic control of the water flow temperature based on the external air temperature significantly increases the comfort and energy efficiency of the system. Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages the production of hot water via a 3-way valve to be installed externally to the unit Ease of installation : The i-BX-N heat pumps are of the “packaged” monobloc type, particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the procedures typical of direct expansion air conditioning systems. Intelligent management of your system Nadisystem guarantees centralized regulation of the system ensuring: Easy communication between different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on availability, yields and costs of their use, always favoring renewable sources. The auxiliary sources are activated to satisfy the building's needs at low external temperatures by integrating the thermal power of the heat pump Customization of the system Nadisystem has several special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of systems with different water temperature levels. Cascading unit management In case of high thermal needs, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure made of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with continuous speed regulation that provide improved air distribution, achieving low consumption and minimising noise levels Drums Condenser with copper tubes and aluminum fins Battery protection grids as standard up to size 015 Control Keyboard with LCD display and electronic menu adjustment NADICompact Function keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM Control Setting the water set point with a fixed or dynamic value with a climatic curve. Antifreeze protection depending on water temperature and outside air temperature. Production of domestic hot water. 4Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade System Management In case of high thermal requirements, it is possible to connect up to 4 units of the same power in cascade Managed in master slave mode, with the master unit taking care of processing the information and then transmitting it to the slave units High degree of partialization of the power supplied, without decreasing performance, and a precise sizing of the system Possibility to dedicate one or all units to the production of domestic hot water. Integrated hydronic group All hydraulic components for installation are already included without any increase in unit size. EC pump, brushless motor with electronic commutation to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion vessel. Air vent valve. Mesh filter, not fitted but supplied with the unit Evaporator Brazed plate exchanger in AISI 316 steel, externally coated with anti-condensation closed-cell neoprene mat (CFC and HCFC-free). Electric thermostatic resistance to protect against ice formation inside. Low pressure drops and optimised heat exchange Refrigerant circuit Electronic expansion valve as standard Optimized coolant flow Precise and effective temperature control Quick adjustment and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special anti-freeze function Dedicated algorithms prevent the formation of ice inside by managing the operation Of the electrical resistance on the plate exchanger. Of the pump based on the outside air temperature. Of the flow switch in case of lack of flow The unit is also designed to operate with non-freezing mixtures up to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water storage probe and inertial storage probe Copper-Aluminum type batteries with epoxy coating Copper-Copper type batteries Hydraulic separator Hot water storage Antifreeze electric resistance for base and auxiliary condensation collection tray RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical Features Model : i-BX-N010T Item code : 401477 On-board control included Cooling Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 10.5 kW Absorbed electrical power: 3.64 kW EER : 2.88 ESEER : 4.24 Values ​​referred to the EN14511 regulation Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 10.5 kW EER : 2.89 ESEER : 4.29 Class : C Heating Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 11.4 kW Absorbed electrical power: 3.66 kW COP : 3.11 Values ​​referred to the EN14511 regulation Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 11.4 kW COP : 3.12 Class : B Energy Efficiency in Cooling SEER : 4.46 Efficiency ηs : 175 % Energy Efficiency in Low Temperature Heating PDesign : 8.48 kW SCOP : 3.64 Efficiency ηs : 142 % Seasonal efficiency class: A+ Energy Efficiency in Medium Temperature Heating PDesign : 9.07 kW SCOP : 2.92 Efficiency ηs : 114 % Seasonal efficiency class: A+ Performance Cooling Exchanger water flow rate: 0.5 m3 /h Pump useful head: 53.3 kPa Sound power level: 69 dB(A) Sound pressure: 54 dB(A) Heating Exchanger water flow rate: 0.55 m3 /h Pump useful head: 50.2 kPa Sound power level: 69 dB(A) Sound pressure: 54 dB(A) Electrical Data Power supply (V,Hz,Ø) : 380~415/50/3 Refrigerant gas: R-410 Operating limits Heating Outside air temperature: -20°C ~ 45°C Inlet water temperature: 24°C~ 60°C Cooling Outside air temperature : -10°C ~ 46°C Inlet water temperature: -8°C ~ 20°C Dimensions and Weight Dimensions (LxWxH): 900x420x1240 mm Empty weight: 115.0 Kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of providing heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single-circuit configuration using R410A refrigerant, air-side exchange battery with copper pipes and aluminum fins, water-side exchanger with brazed plates. The unit is equipped with an electronic expansion valve and integrated hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to accurate thermoregulation combined with the use of inverter technology. The accurate design and use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are synergistically regulated according to proprietary logics to maximize the unit's efficiencies. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology that guarantees the exact energy corresponding to the real needs of the building. High efficiency that translates into reduced energy consumption throughout the working period of the unit. Comfort applications Residential buildings Commercial premises Infrastructures for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems can be created with cascade systems ErP Ready Thanks to inverter technology, i-BX-N complies with the ErP directive, exceeding the minimum seasonal energy efficiency requirements in heating, SCOP, for both low temperature and medium temperature applications. Silent operation : Noise emissions are reduced thanks to the modulation of the compressor frequency and fan speed Reduced consumption : The dynamic control of the water flow temperature based on the external air temperature significantly increases the comfort and energy efficiency of the system. Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages the production of hot water via a 3-way valve to be installed externally to the unit Ease of installation : The i-BX-N heat pumps are of the “packaged” monobloc type, particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the procedures typical of direct expansion air conditioning systems. Intelligent management of your system Nadisystem guarantees centralized regulation of the system ensuring: Easy communication between different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on availability, yields and costs of their use, always favoring renewable sources. The auxiliary sources are activated to satisfy the building's needs at low external temperatures by integrating the thermal power of the heat pump Customization of the system Nadisystem has several special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of systems with different water temperature levels. Cascading unit management In case of high thermal needs, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure made of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with continuous speed regulation that provide improved air distribution, achieving low consumption and minimising noise levels Drums Condenser with copper tubes and aluminum fins Battery protection grids as standard up to size 015 Control Keyboard with LCD display and electronic menu adjustment NADICompact Function keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM Control Setting the water set point with a fixed or dynamic value with a climatic curve. Antifreeze protection depending on water temperature and outside air temperature. Production of domestic hot water. 4Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade System Management In case of high thermal requirements, it is possible to connect up to 4 units of the same power in cascade Managed in master slave mode, with the master unit taking care of processing the information and then transmitting it to the slave units High degree of partialization of the power supplied, without decreasing performance, and a precise sizing of the system Possibility to dedicate one or all units to the production of domestic hot water. Integrated hydronic group All hydraulic components for installation are already included without any increase in unit size. EC pump, brushless motor with electronic commutation to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion vessel. Air vent valve. Mesh filter, not fitted but supplied with the unit Evaporator Brazed plate exchanger in AISI 316 steel, externally coated with anti-condensation closed-cell neoprene mat (CFC and HCFC-free). Electric thermostatic resistance to protect against ice formation inside. Low pressure drops and optimised heat exchange Refrigerant circuit Electronic expansion valve as standard Optimized coolant flow Precise and effective temperature control Quick adjustment and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special anti-freeze function Dedicated algorithms prevent the formation of ice inside by managing the operation Of the electrical resistance on the plate exchanger. Of the pump based on the outside air temperature. Of the flow switch in case of lack of flow The unit is also designed to operate with non-freezing mixtures up to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water storage probe and inertial storage probe Copper-Aluminum type batteries with epoxy coating Copper-Copper type batteries Hydraulic separator Hot water storage Antifreeze electric resistance for base and auxiliary condensation collection tray RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical Features Model : i-BX-N015T Item code : 401479 On-board control included Cooling Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 14.7 kW Electrical power consumption: 5.24 kW EER : 2.81 ESEER : 4.31 Values ​​referred to the EN14511 regulation Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 14.7 kW EER : 2.82 ESEER : 4.38 Class : C Heating Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 17.2 kW Absorbed electrical power: 5.15 kW COP : 3.34 Values ​​referred to the EN14511 regulation Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 17.2 kW COP : 3.36 Class : A Energy Efficiency in Cooling SEER : 4.53 Efficiency ηs : 178 % Energy Efficiency in Low Temperature Heating PDesign : 12.3 kW SCOP : 3.67 Efficiency ηs : 144 % Seasonal efficiency class: A+ Energy Efficiency in Medium Temperature Heating PDesign : 13.82 kW SCOP : 2.98 Efficiency ηs : 116 % Seasonal efficiency class: A+ Performance Cooling Exchanger water flow rate: 0.7 m3 /h Pump useful head: 78.7 kPa Sound power level: 74 dB(A) Sound pressure: 59 dB(A) Heating Exchanger water flow rate: 0.83 m3 /h Pump useful head: 71.5 kPa Sound power level: 74 dB(A) Sound pressure: 59 dB(A) Electrical Data Power supply (V,Hz,Ø) : 380~415/50/3 Refrigerant gas: R-410 Operating limits Heating Outside air temperature: -20°C ~ 45°C Inlet water temperature: 24°C~ 60°C Cooling Outside air temperature : -10°C ~ 46°C Inlet water temperature: -8°C ~ 20°C Dimensions and Weight Dimensions (LxWxH): 1450x550x1200 mm Empty weight: 180.0 Kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of providing heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single-circuit configuration using R410A refrigerant, air-side exchange battery with copper pipes and aluminum fins, water-side exchanger with brazed plates. The unit is equipped with an electronic expansion valve and integrated hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to accurate thermoregulation combined with the use of inverter technology. The accurate design and use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are synergistically regulated according to proprietary logics to maximize the unit's efficiencies. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology that guarantees the exact energy corresponding to the real needs of the building. High efficiency that translates into reduced energy consumption throughout the working period of the unit. Comfort applications Residential buildings Commercial premises Infrastructures for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems can be created with cascade systems ErP Ready Thanks to inverter technology, i-BX-N complies with the ErP directive, exceeding the minimum seasonal energy efficiency requirements in heating, SCOP, for both low temperature and medium temperature applications. Silent operation : Noise emissions are reduced thanks to the modulation of the compressor frequency and fan speed Reduced consumption : The dynamic control of the water flow temperature based on the external air temperature significantly increases the comfort and energy efficiency of the system. Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages the production of hot water via a 3-way valve to be installed externally to the unit Ease of installation : The i-BX-N heat pumps are of the “packaged” monobloc type, particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the procedures typical of direct expansion air conditioning systems. Intelligent management of your system Nadisystem guarantees centralized regulation of the system ensuring: Easy communication between different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on availability, yields and costs of their use, always favoring renewable sources. The auxiliary sources are activated to satisfy the building's needs at low external temperatures by integrating the thermal power of the heat pump Customization of the system Nadisystem has several special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of systems with different water temperature levels. Cascading unit management In case of high thermal needs, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure made of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with continuous speed regulation that provide improved air distribution, achieving low consumption and minimising noise levels Drums Condenser with copper tubes and aluminum fins Battery protection grids as standard up to size 015 Control Keyboard with LCD display and electronic menu adjustment NADICompact Function keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM Control Setting the water set point with a fixed or dynamic value with a climatic curve. Antifreeze protection depending on water temperature and outside air temperature. Production of domestic hot water. 4Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade System Management In case of high thermal requirements, it is possible to connect up to 4 units of the same power in cascade Managed in master slave mode, with the master unit taking care of processing the information and then transmitting it to the slave units High degree of partialization of the power supplied, without decreasing performance, and a precise sizing of the system Possibility to dedicate one or all units to the production of domestic hot water. Integrated hydronic group All hydraulic components for installation are already included without any increase in unit size. EC pump, brushless motor with electronic commutation to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion vessel. Air vent valve. Mesh filter, not fitted but supplied with the unit Evaporator Brazed plate exchanger in AISI 316 steel, externally coated with anti-condensation closed-cell neoprene mat (CFC and HCFC-free). Electric thermostatic resistance to protect against ice formation inside. Low pressure drops and optimised heat exchange Refrigerant circuit Electronic expansion valve as standard Optimized coolant flow Precise and effective temperature control Quick adjustment and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special anti-freeze function Dedicated algorithms prevent the formation of ice inside by managing the operation Of the electrical resistance on the plate exchanger. Of the pump based on the outside air temperature. Of the flow switch in case of lack of flow The unit is also designed to operate with non-freezing mixtures up to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water storage probe and inertial storage probe Copper-Aluminum type batteries with epoxy coating Copper-Copper type batteries Hydraulic separator Hot water storage Antifreeze electric resistance for base and auxiliary condensation collection tray RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical Features Model : i-BX-N025T Item code : 401481 On-board control included Cooling Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 24.7 kW Electrical power consumption: 8.99 kW EER : 2.75 ESEER : 3.93 Values ​​referred to the EN14511 regulation Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 24.7 kW EER : 2.77 ESEER : 4.03 Class : C Heating Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 26.1 kW Electrical power consumption: 8.31 kW COP : 3.14 Values ​​referred to the EN14511 regulation Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 26.1 kW COP : 3.16 Class : B Energy Efficiency in Cooling SEER : 4.22 Efficiency ηs : 166 % Energy Efficiency in Low Temperature Heating PDesign : 21.9 kW SCOP : 3.77 Efficiency ηs : 148 % Seasonal efficiency class: A+ Energy Efficiency in Medium Temperature Heating PDesign : 21.37 kW SCOP : 2.95 Efficiency ηs : 115 % Seasonal efficiency class: A+ Performance Cooling Exchanger water flow rate: 1.18 m3 /h Pump useful head: 61.5 kPa Sound power level: 75 dB(A) Sound pressure: 59 dB(A) Heating Exchanger water flow rate: 1.26 m3 /h Pump useful head: 55 kPa Sound power level: 75 dB(A) Sound pressure: 59 dB(A) Electrical Data Power supply (V,Hz,Ø) : 380~415/50/3 Refrigerant gas: R-410 Operating limits Heating Outside air temperature: -20°C ~ 45°C Inlet water temperature: 24°C~ 60°C Cooling Outside air temperature : -10°C ~ 46°C Inlet water temperature: -8°C ~ 20°C Dimensions and Weight Dimensions (LxWxH): 1450x550x1700 mm Empty weight: 265.0 Kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of providing heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single-circuit configuration using R410A refrigerant, air-side exchange battery with copper pipes and aluminum fins, water-side exchanger with brazed plates. The unit is equipped with an electronic expansion valve and integrated hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to accurate thermoregulation combined with the use of inverter technology. The accurate design and use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are synergistically regulated according to proprietary logics to maximize the unit's efficiencies. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology that guarantees the exact energy corresponding to the real needs of the building. High efficiency that translates into reduced energy consumption throughout the working period of the unit. Comfort applications Residential buildings Commercial premises Infrastructures for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems can be created with cascade systems ErP Ready Thanks to inverter technology, i-BX-N complies with the ErP directive, exceeding the minimum seasonal energy efficiency requirements in heating, SCOP, for both low temperature and medium temperature applications. Silent operation : Noise emissions are reduced thanks to the modulation of the compressor frequency and fan speed Reduced consumption : The dynamic control of the water flow temperature based on the external air temperature significantly increases the comfort and energy efficiency of the system. Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages the production of hot water via a 3-way valve to be installed externally to the unit. Ease of installation : The i-BX-N heat pumps are of the “packaged” monobloc type, particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the procedures typical of direct expansion air conditioning systems. Intelligent management of your system Nadisystem guarantees centralized regulation of the system ensuring: Easy communication between different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on availability, yields and costs of their use, always favoring renewable sources. The auxiliary sources are activated to satisfy the building's needs at low external temperatures by integrating the thermal power of the heat pump Customization of the system Nadisystem has several special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of systems with different water temperature levels. Cascading unit management In case of high thermal needs, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure made of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with continuous speed regulation that provide improved air distribution, achieving low consumption and minimising noise levels Drums Condenser with copper tubes and aluminum fins Battery protection grids as standard up to size 015 Control Keyboard with LCD display and electronic menu adjustment NADICompact Function keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM Control Setting the water set point with a fixed or dynamic value with a climatic curve. Antifreeze protection depending on water temperature and outside air temperature. Production of domestic hot water. 4Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade System Management In case of high thermal requirements, it is possible to connect up to 4 units of the same power in cascade Managed in master slave mode, with the master unit taking care of processing the information and then transmitting it to the slave units High degree of partialization of the power supplied, without decreasing performance, and a precise sizing of the system Possibility to dedicate one or all units to the production of domestic hot water. Integrated hydronic group All hydraulic components for installation are already included without any increase in unit size. EC pump, brushless motor with electronic commutation to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion vessel. Air vent valve. Mesh filter, not fitted but supplied with the unit Evaporator Brazed plate exchanger in AISI 316 steel, externally coated with anti-condensation closed-cell neoprene mat (CFC and HCFC-free). Electric thermostatic resistance to protect against ice formation inside. Low pressure drops and optimised heat exchange Refrigerant circuit Electronic expansion valve as standard Optimized coolant flow Precise and effective temperature control Quick adjustment and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special anti-freeze function Dedicated algorithms prevent the formation of ice inside by managing the operation Of the electrical resistance on the plate exchanger. Of the pump based on the outside air temperature. Of the flow switch in case of lack of flow The unit is also designed to operate with non-freezing mixtures up to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water storage probe and inertial storage probe Copper-Aluminum type batteries with epoxy coating Copper-Copper type batteries Hydraulic separator Hot water storage Antifreeze electric resistance for base and auxiliary condensation collection tray RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less