Our chiller heat pumps represent the innovative energy solution for efficient heating and cooling of rooms. Check it out and discover the benefits today!
Chiller heat pumps
Climaveneta Climaveneta Inverter Reversible Heat Pump I-Bx-N008m Single-Phase R-410 With On Board Control Included
ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical features Model : i-BX-N008M Article number : 401474 Command on board included Cooling down External air temperature 35°C - Water temperature 7°C Cooling power: 7.5 kW Absorbed electrical power: 2.72 kW EER: 2.76 ESEER: 4.45 Values referred to the EN14511 standard External air temperature 35°C - Water temperature 7°C Cooling power: 5.9 kW EER: 2.81 ESEER: 4.83 Class : C Heating External air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 8.51 kW Absorbed electrical power: 2.65 kW COP: 3.21 Values referred to the EN14511 standard External air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 8.5 kW COP: 3.26 Class : A Energy efficiency in cooling SEER: 4.71 Efficiency ηs : 185 % Energy efficiency in low temperature heating PDesign : 6.02 kW SCOP : 4.15 Efficiency ηs : 163 % Seasonal efficiency class: A++ Energy efficiency in medium temperature heating PDesign : 7.02 kW SCOP: 3.23 Efficiency ηs : 126 % Seasonal efficiency class: A++ Performance Cooling down Exchanger water flow rate: 0.36 m 3 /h Available pump head: 66.5 kPa Sound power level : 66 dB(A) Sound pressure : 51 dB(A) Heating Exchanger water flow rate: 0.41 m 3 /h Available pump head: 57.9 kPa Sound power level : 66 dB(A) Sound pressure : 51 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-410 Operating limits Heating External air temperature : -20°C ~ 45°C Introduced water temperature : 24°C~ 60°C Cooling down External air temperature : -10°C ~ 46°C Introduced water temperature : -8°C ~ 20°C Dimensions and weight Dimensions (LxWxH): 900x420x1240 mm Empty weight: 100.0 Kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single circuit configuration using R410A refrigerant, air side exchange coil with copper pipes and aluminum fins, water side heat exchanger with brazed plates. The unit is equipped with an electronic expansion valve and built-in hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to the accurate thermoregulation combined with the use of inverter technology. The accurate design and the use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are regulated synergistically according to proprietary logics to maximize unit efficiency. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology which guarantees the exact energy in correspondence with the real needs of the building. High efficiency which translates into reduced energy consumption throughout the unit's working period. Comfort applications Residential buildings Business premises Infrastructure for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems that can be created with cascade systems ErP Ready i-BX-N thanks to the inverter technology complies with the ErP directive, exceeding the minimum requirements for seasonal energy efficiency in heating, SCOP, both for low temperature and medium temperature applications Silent operation : Noise emissions are reduced thanks to the modulation of the frequency of the compressor and the speed of the fan Reduced consumption : The dynamic control of the water delivery temperature according to the outside air temperature greatly increases the comfort and energy efficiency of the system Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages hot water production via a 3-way valve to be installed outside the unit Ease of installation : The i-BX-N heat pumps are of the "packaged" monobloc type which are particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the typical procedures of direct expansion air conditioning systems Intelligent management of your system Nadisystem guarantees centralized regulation of the system, ensuring: Easy communication between the different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on the availability, yields and costs of their use, always preferring renewable sources. The auxiliary sources are activated to meet the building's needs at low outside temperatures by integrating the thermal power of the heat pump System customization Nadisystem has various special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of system with different water temperature levels. Cascade management of units If the heat requirements are high, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure consisting of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with stepless speed regulation that improve the air distribution obtaining low consumption and minimizing the sound level Drums Condenser with copper tubes and aluminum fins Standard coil protection grids up to size 015 Control Keyboard with LCD display and electronic adjustment via menu NADI Compact Functional keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM control Setting of the water set point with fixed or dynamic value with Climatic Curve. Antifreeze protection according to water temperature and outside air temperature. Domestic hot water production. 4 Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade system management If the heat requirements are high, it is possible to connect up to 4 units of the same power in cascade Managed in master-slave mode, with the master unit in charge of processing the information and then transmitting it to the slave units High degree of partialisation of the supplied power, without reducing performance, and precise sizing of the system Possibility of dedicating just one or all the units to the production of domestic hot water. Integrated hydronic group All plumbing components for installation are already included with no increase in unit size. EC pump, brushless motor with electronic switching to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion vessel. Air vent valve. Mesh filter, unassembled but supplied with the unit Evaporator Brazed plate heat exchanger in AISI 316 steel, externally lined with anti-condensation mat in closed cell neoprene (CFC and HCFC-free). Thermostatic electric resistance to protect against the formation of ice inside. Low pressure drops and optimized heat exchange Refrigerant circuit Standard electronic expansion valve Optimized coolant flow Precise and effective temperature control Fast regulation and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special antifreeze function Dedicated algorithms avoid the formation of ice inside by managing the operation Of the electrical resistance on the plate heat exchanger. Of the pump according to the outside air temperature. Of the flow switch in case of no flow The unit is also set up to operate, with brine mixtures, down to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water tank probe and inertial tank probe Copper-Aluminium type batteries with epoxy painting Copper-Copper type batteries Hydraulic separator Domestic hot water storage Antifreeze electric heater on base and for auxiliary condensate drain pan RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€3.630,00
-
Climaveneta Climaveneta Inverter Reversible Heat Pump I-Bx-N004m Single-Phase R-410 With On Board Control Included
ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical features Model : i-BX-N004M Article number : 401472 Command on board included Cooling down External air temperature 35°C - Water temperature 7°C Cooling power: 4.2 kW Absorbed electrical power: 1.55 kW EER: 2.71 ESEER: 4.24 Values referred to the EN14511 standard External air temperature 35°C - Water temperature 7°C Cooling power: 4.2 kW EER: 2.76 ESEER: 4.61 Class : C Heating External air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 4.63 kW Absorbed electrical power: 1.51 kW COP: 3.07 Values referred to the EN14511 standard External air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 4.62 kW COP: 3.12 Class : B Energy efficiency in cooling SEER: 4.42 Efficiency ηs : 174 % Energy efficiency in low temperature heating PDesign : 3.4 kW SCOP: 3.59 Efficiency ηs : 140 % Seasonal efficiency class : A+ Energy efficiency in medium temperature heating PDesign : 3.67 kW SCOP: 2.81 Efficiency ηs : 110 % Seasonal efficiency class : A+ Performance Cooling down Exchanger water flow rate: 0.2 m 3 /h Available pump head: 51.4 kPa Sound power level : 64 dB(A) Sound pressure : 50dB(A) Heating Exchanger water flow rate: 0.22 m 3 /h Available pump head: 47.9 kPa Sound power level : 64 dB(A) Sound pressure : 50dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-410 Operating limits Heating External air temperature : -20°C ~ 45°C Introduced water temperature : 24°C~ 60°C Cooling down External air temperature : -10°C ~ 46°C Introduced water temperature : -8°C ~ 20°C Dimensions and weight Dimensions (LxWxH): 900x370x940 mm Empty weight: 80.0 Kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single circuit configuration using R410A refrigerant, air side exchange coil with copper pipes and aluminum fins, water side heat exchanger with brazed plates. The unit is equipped with an electronic expansion valve and built-in hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to the accurate thermoregulation combined with the use of inverter technology. The accurate design and the use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are regulated synergistically according to proprietary logics to maximize unit efficiency. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology which guarantees the exact energy in correspondence with the real needs of the building. High efficiency which translates into reduced energy consumption throughout the unit's working period. Comfort applications Residential buildings Business premises Infrastructure for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems that can be created with cascade systems ErP Ready i-BX-N thanks to the inverter technology complies with the ErP directive, exceeding the minimum requirements for seasonal energy efficiency in heating, SCOP, both for low temperature and medium temperature applications Silent operation : Noise emissions are reduced thanks to the modulation of the frequency of the compressor and the speed of the fan Reduced consumption : The dynamic control of the water delivery temperature according to the outside air temperature greatly increases the comfort and energy efficiency of the system Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages hot water production via a 3-way valve to be installed outside the unit Ease of installation : The i-BX-N heat pumps are of the "packaged" monobloc type which are particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the typical procedures of direct expansion air conditioning systems Intelligent management of your system Nadisystem guarantees centralized regulation of the system, ensuring: Easy communication between the different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on the availability, yields and costs of their use, always preferring renewable sources. The auxiliary sources are activated to meet the building's needs at low outside temperatures by integrating the thermal power of the heat pump System customization Nadisystem has various special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of system with different water temperature levels. Cascade management of units If the heat requirements are high, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure consisting of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with stepless speed regulation that improve the air distribution obtaining low consumption and minimizing the sound level Drums Condenser with copper tubes and aluminum fins Standard coil protection grids up to size 015 Control Keyboard with LCD display and electronic adjustment via menu NADI Compact Functional keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM control Setting of the water set point with fixed or dynamic value with Climatic Curve. Antifreeze protection according to water temperature and outside air temperature. Domestic hot water production. 4 Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade system management If the heat requirements are high, it is possible to connect up to 4 units of the same power in cascade Managed in master-slave mode, with the master unit in charge of processing the information and then transmitting it to the slave units High degree of partialisation of the supplied power, without reducing performance, and precise sizing of the system Possibility of dedicating just one or all the units to the production of domestic hot water. Integrated hydronic unit All plumbing components for installation are already included with no increase in unit size. EC pump, brushless motor with electronic switching to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion tank. Air vent valve. Mesh filter, unassembled but supplied with the unit Evaporator Brazed plate heat exchanger in AISI 316 steel, externally lined with anti-condensation mat in closed cell neoprene (CFC and HCFC-free). Thermostatic electric resistance to protect against the formation of ice inside. Low pressure drops and optimized heat exchange Refrigerant circuit Standard electronic expansion valve Optimized coolant flow Precise and effective temperature control Fast regulation and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special antifreeze function Dedicated algorithms avoid the formation of ice inside by managing the operation Of the electrical resistance on the plate heat exchanger. Of the pump according to the outside air temperature. Of the flow switch in case of no flow The unit is also set up to operate, with brine mixtures, down to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water tank probe and inertial tank probe Copper-Aluminium type batteries with epoxy painting Copper-Copper type batteries Hydraulic separator Domestic hot water storage Antifreeze electric heater on base and for auxiliary condensate drain pan RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€3.110,00
-
Haier Air-Water Monobloc Heat Pump Inverter Haier Super Water Au162fycra R-32 Single-Phase With Control Included 25023016z
ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS OPTIONAL START UP! Technical features Model : AU162FYCRA(HW) Commercial code: 25023016Z Surface : Up to 180 m2 Standard YR-E27 command Standard Y-filter Heating LWT 35°C ~ OAT 7°C Output power: 16.00 kW Absorbed power: 3.86 kW COP: 4.15 Heating LWT 55°C ~ OAT 7°C Output power: 14.01 kW Absorbed power: 5.63 kW COP: 2.49 Energy efficiency Heating with medium delivery water temperature at 35°C SCOP : 4.00 ηs : 157% Energy class: A++ Heating with medium delivery water temperature at 55°C SCOP: 3.09 ηs : 121% Energy class: A+ Cooling LWT 7°C ~ OAT 35°C Output power: 14.50 kW Absorbed power: 4.92 kW EER: 2.95 Cooling LWT 18°C ~ OAT 35°C Output power: 16.00 kW Absorbed power: 3.64 kW EER: 4.40 Performance Water flow rate: 45.8 l/min Minimum system water content: 80 litres Sound power : 68 dB(A) Internal water pump model : Grundfos External temperature operating limits Heating : -20°C ~ 35°C Cooling : 10°C ~ 46°C Delivery water temperature range Heating : 25°C ~ 55°C Cooling : 5°C ~ 20°C Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Inlet / outlet liquid pipes diameter: 1" F Dimensions and weight Net dimensions (LxPxH): 950x370x1500 mm Net weight : 145.0 Kg Gross dimensions (LxDxH): 1010x480x1638 mm Gross weight : 157.0 kg R-32 Haier Super Acqua Monoblock Air-Water Heat Pump Super Acqua is the new Haier monobloc air/water heat pump , reversible, high efficiency , with DC inverter compressors, DC Brushless fans, and DC inverter circulator. The Haier Super Acqua packaged heat pump has been designed for residential and commercial applications and is designed for: Winter heating Summer cooling Domestic hot water production All the advantages of a heat pump system In a period of energy price increases like the one we are experiencing, the presence of a heat pump system in the home can help a lot in terms of savings. The heat pump works on the basis of a heat exchange process between environments with different temperatures: the machine obtains energy from the air or from the subsoil or from the water and returns it to the internal environment through the heat exchanger. The energy produced by a heat pump can be used to heat or cool rooms but also to produce hot water. Heat pumps are considered a cost-effective choice because they can produce up to 5 kWh of thermal energy with 1 kWh of electricity, so you get more energy than you use. In addition to the indisputable economic advantages, linked to greater energy efficiency, a heat pump system requires less maintenance, since fuel oil or gas is not burned inside. Finally, from the point of view of environmental impact, the heat pump can certainly be said to be more sustainable because it does not produce CO ₂ emissions caused by the combustion of fossil raw materials. The advantages of heat pumps are therefore various and are even more evident in Haier's Super Water air heat pumps, monobloc and split , which guarantee maximum comfort Maximum comfort with the Super Acqua heat pump The Haier Super Acqua heat pump ensures maximum comfort thanks to: - Fast and comfortable heating - Standard YR-E27 / YR-E27A remote control , which allows optimal management of energy flows, as well as easy control of the various operating parameters of the machine - Minimum sound level with "Quiet" operating mode - Domestic hot water (DHW) regulation and "Turbo" mode to reach the water temperature set point in the shortest possible time - Predefined time programs with switching on and/or switching off differentiated for working days and weekends Haier Super Acqua heat pump installation: quick and easy! The Haier Super Acqua packaged heat pump , with the integrated heat exchanger , does not require the connection of gas pipes. The integrated hydraulic circuit is equipped with a high efficiency inverter circulator. Also included as standard: • Expansion valve • Differential flow switch • Safety valve to guarantee the stability of the hydronic system • 4-way valve for reversing the refrigeration cycle The compact dimensions facilitate installation even in small spaces . Safety first On the safety side, in addition to the water overpressure valve installed inside , there are also pressure sensors and pressure switches on the gas side . Furthermore, the flow switch (or differential pressure switch) and the continuous control of the inlet-outlet water temperatures guarantee that the unit always works with the correct flow rate, avoiding malfunctions or, worse, damage to components. There is also a dedicated " antifreeze " logic: if the external temperature and water conditions require it, the internal pump will be activated and, if necessary, also the compressor, to bring the water back to temperatures far from freezing Top performance in all seasons The guaranteed heating performance down to -20°C outside temperature make the Super Acqua heat pump suitable for installation in any climatic zone, even in those with the most severe conditions. The supplied temperature sensors ensure that, in case of temperatures below 0°C, the compressor and the pump are constantly in operation to avoid possible freezing. The 5 kW heat pump size guarantees its performance down to -25°C outside temperature Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€4.825,00
-
ARISTON Air-Water Monoblock Heat Pump Inverter Ariston Nimbus Pocket M Net 120t R-32 Three-Phase 3301875 Class A+++/A++
ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : NIMBUS POCKET M NET 120T Product code : 3301875 Sensys HD as standard Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating External air temperature -7°C - Water temperature 30/35°C Nonimal thermal power: 9.51 kW Absorbed electrical power: 2.97 kW COP: 3.20 External air temperature 7°C - Water temperature 30/35°C Thermal power: 12.00 kW Absorbed electrical power: 2.45 kW COP: 4.90 External air temperature 7°C - Water temperature 40/45°C Normal thermal power: 8.20 kW Absorbed electrical power: 2.00 kW COP: 4.10 Cooling External air temperature 35°C - Water temperature 7°/12°C Nonimal cooling capacity: 9.05 kW Absorbed electrical power: 2.87 kW EER: 3.15 External air temperature 35°C - Water temperature 18°/23°C Normal cooling capacity: 10.74 kW Absorbed electrical power: 2.11 kW EER: 5.08 Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Installation data Plumber's Pipe Diameter: 1" inch Male Dimensions and weight Dimensions (WxHxD): 1016x1506x374 mm Empty weight: 131.0 kg Ariston Nimbus Pocket M Net heat pump Heat pump for hot, cold and domestic hot water functions High efficiency packaged inverter heat pump capable of heating and cooling the environment. Thanks to optimal energy management, maximum performance efficiency is guaranteed at any outside temperature. POCKET I do not include the hydraulic module for a space-saving as much as possible. Optimized performance The innovative Energy Manager technology manages the entire hardware and software system, ensuring stable performance at any external temperature and the lowest noise level in its category Total efficiency High levels of efficiency across the entire range for both heating and cooling functions. Already prepared for energy labeling A+++ for heating Built-in connectivity The Ariston NET App allows you to control the heating, cooling and hot water functions directly from your smartphone and provides 24-hour assistance 360° control Through the interface of the integrated Sensys NET system it is possible to effectively control multiple zones, also integrating renewable solar energy, both thermal and photovoltaic, and auxiliary generators Quality 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. 100% BUILT TO LAST Strong and super resistant materials, components and products developed to perform in extreme conditions to deliver high-level results with maximum durability Totally safe Designed with the most modern technology and built with selected materials, Ariston heat pumps are totally safe Advantages Inverter packaged heat pump R32 ecological gas COP up to 5.1 Quietness, up to 53 dB(A) Power range from 1.7 to 17.7 kW Sensys HD as standard Light Box electrical box that can also be installed outdoors Plug & Play solution Back up electrical resistance available as an accessory WI-FI connectivity as standard Remote management with the Ariston NET app Optional 24/7 teleassistance Photovoltaic function Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€5.130,00
-
ARISTON Air-Water Monoblock Heat Pump Inverter Ariston Nimbus Pocket M Net 80t R-32 Three-Phase 3301873 Class A+++/A++
ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : NIMBUS POCKET M NET 80T Product code : 3301873 Sensys HD as standard Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating External air temperature -7°C - Water temperature 30/35°C Nonimal thermal power: 7.41 kW Absorbed electrical power: 2.47 kW COP : 3.00 External air temperature 7°C - Water temperature 30/35°C Thermal power: 8.00 kW Absorbed electrical power: 1.67 kW COP: 4.80 External air temperature 7°C - Water temperature 40/45°C Normal thermal power: 6.00 kW Absorbed electrical power: 1.62 kW COP: 3.70 Cooling External air temperature 35°C - Water temperature 7°/12°C Nonimal cooling capacity: 7.00 kW Absorbed electrical power: 2.26 kW EER: 3.10 External air temperature 35°C - Water temperature 18°/23°C Nonimal cooling capacity: 7.00 kW Absorbed electrical power: 1.49 kW EER: 4.70 Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Installation data Plumber's Pipe Diameter: 1" inch Male Dimensions and weight Dimensions (WxHxD): 1016x1106x374 mm Empty weight: 104.0 kg Ariston Nimbus Pocket M Net heat pump Heat pump for hot, cold and domestic hot water functions High efficiency packaged inverter heat pump capable of heating and cooling the environment. Thanks to optimal energy management, maximum performance efficiency is guaranteed at any outside temperature. POCKET I do not include the hydraulic module for a space-saving as much as possible. Optimized performance The innovative Energy Manager technology manages the entire hardware and software system, ensuring stable performance at any external temperature and the lowest noise level in its category Total efficiency High levels of efficiency across the entire range for both heating and cooling functions. Already prepared for energy labeling A+++ for heating Built-in connectivity The Ariston NET App allows you to control the heating, cooling and hot water functions directly from your smartphone and provides 24-hour assistance 360° control Through the interface of the integrated Sensys NET system it is possible to effectively control multiple zones, also integrating renewable solar energy, both thermal and photovoltaic, and auxiliary generators Quality 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. 100% BUILT TO LAST Strong and super resistant materials, components and products developed to perform in extreme conditions to deliver high-level results with maximum durability Totally safe Designed with the most modern technology and built with selected materials, Ariston heat pumps are totally safe Advantages Inverter packaged heat pump R32 ecological gas COP up to 5.1 Quietness, up to 53 dB(A) Power range from 1.7 to 17.7 kW Sensys HD as standard Light Box electrical box that can also be installed outdoors Plug & Play solution Back up electrical resistance available as an accessory WI-FI connectivity as standard Remote management with the Ariston NET app Optional 24/7 teleassistance Photovoltaic function Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€4.265,00
-
Ferroli Air-Water Reversible Split Heat Pump Inverter Ferroli Omnia St 3.2 16t System With Three-Phase R-32 Electrical Integration With Control Included
ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : OMNIA S 3.2 16T Product code : 0XHUGSWA Command included Optional accessories CONNECT CRP remote control Performance Heating Useful power in heating with water set at 35° C: 15.9 kW Useful power in heating with water set at 45° C: 16.0 kW Useful power in heating with water set at 55°C: 16.0 kW Absorbed power with water set at 35° C: 3.53 kW Absorbed power with water set at 45° C: 4.57 kW Absorbed power with water set at 55° C: 5.61 kW Water flow rate with water set at 35° C : 2735 l/h Water flow with water set at 45° C : 2752 /h Water flow rate with water set at 55° C : 1720 l/h Cooling down Useful power in cooling with water set at 7 °C: 14.0 kW Useful power in cooling with water set at 18 °C: 13.6 kW Absorbed power with water set at 7° C: 5.60 kW Absorbed power with water set at 18° C: 3.77 kW Water flow rate with water set at 7° C : 2408 l/h Water flow rate with water set at 18° C : 2563 l/h External unit technical data Compressor type : Twin Rotary DC Number of compressors : 1 Number of cooling circuits: 1 Type of fans : DC axial Number of fans : 1 Sound power level in heating : 56 ~ 69 dB(A) Sound power level in cooling : 56 ~ 69 dB(A) Liquid pipe diameter : 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Maximum piping length: 30 m Maximum pipe height difference: 20 m Indoor unit technical data Exchanger type : Brazed stainless steel plates Expansion vessel volume: 10 litres Water safety valve setting: 3 bar Minimum system water content: 40 litres System piping diameter: 1" gas F DHW piping diameter: 3/4" gas F Liquid pipe diameter : 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Dimensions and weight External unit dimensions (WxHxD): 1118x865x523 mm Outdoor unit weight: 112.0 Kg Internal unit dimensions (WxHxD): 595x1860x700 mm 5 years without worries Ferroli OMNIA ST 3.2 Air-water reversible heat pumps for split installation, with integrated DHW storage Efficiency marries comfort for integrated storage OMNIA ST 3.2 is the evolution of OMNIA S 3.2 and is part of the new range of Full Inverter R32 split heat pumps by Ferroli. When we speak of "split" we mean that the refrigerant circuit is divided between the two units, the external and the internal one. The outdoor unit contains the heart of the refrigerant circuit, from the compressor to the fan with the air side exchanger, which is connected to the refrigerant gas pipes towards the indoor unit. The indoor unit, on the other hand, contains the heart of the generator's hydraulic circuit with all the main pre-installed components, such as the high-efficiency circulator and the expansion tank, to safely allow quick and practical installation. The OMNIA ST 3.2 differ from the OMNIA S 3.2 in having integrated a storage tank for domestic hot water directly into the internal unit. This accumulation is 190L for sizes from 4 to 10, while it is 240L for uppers, from 12 to 16T. But that's not all, OMNIA ST 3.2 can be customized according to your needs, with an 18L inertial kit, kit for solar integration on the storage tank or with a kit for managing 2 different zones, classic direct and mixed, in case where we need 2 different temperatures on the terminals in the house Thanks to its wide operating range , among the widest on the market, OMNIA ST 3.2 works down to -25°C outside and produces hot water up to 65°C in nominal conditions. The new Full Inverter concept by Ferroli uses DC inverter modulations on the 3 main energy-intensive components of the machine, i.e. compressor, fan and pump. This makes it possible to modulate the power supplied by finely tracking the thermal load and allowing the user very high efficiencies and important energy savings . Furthermore, Ferroli's Full Inverter concept allows for the inrush currents to be reduced, avoiding sudden changes to the grid and guaranteeing a longer useful life for the components. With sound levels among the lowest on the market , OMNIA ST 3.2 is able to satisfy all system requirements, but can easily be integrated with a Ferroli boiler. The indoor unit, the heart of hydraulic distribution If the outdoor unit contains the heart of the refrigerant circuit, the indoor unit contains the heart of the water circuit. OMNIA ST 3.2 is much more than an exchanger with a pump. The hydronic module includes all the main components of the system and can be customized according to the user's needs. Stainless steel plate heat exchanger, pressure gauge and sensors, expansion tank, safety valve, automatic vent and brushless DC circulator are just some of the components you will find inside The control system The user interface has been equipped with capsense technology with 2.8” graphic display, which allows the user to interact with the product easily and extremely simply Modbus protocol It can be interfaced to BMS/BACS automation and management systems Heating and cooling Full Inverter modulation finely follows the desired setpoints, with the possibility of setting heating and cooling climatic curves, further optimizing consumption for the user Domestic hot water production When the DHW temperature probe calls the machine, it automatically switches to the domestic hot water tank with dedicated DHW set point. 3-way diverter valve supplied as standard Smart Grid input from photovoltaic and grid Digital Smart Grid inputs for the management of an input from the photovoltaic system and from the electricity grid. These allow you to optimize consumption and bill costs DHW tank electrical resistance The DHW electrical integration serves as integration, anti-legionella or reserve source in the event of an anomaly Fast DHW Priority to DHW production to bring the storage tank to the set point in the shortest possible time Anti-legionella function Allows you to set anti-legionella weekly cycles Silent mode Reduces the frequency of the compressor and the speed of the fan, so as to significantly reduce noise. Programmable on time slots ON/OFF From external contact. Activation and deactivation via an external contact, for example from a zone thermostat Hot / cold From external contacts. Summer/winter switching signal from outside, for example from the zone thermostat ECO function Dedicated setpoint for " Eco " operation. Settable with daily time band Anti-freeze protection Heat pump operation with circulator ON and possible electric booster The brand new Connect CRP and Connect CRP Zone The on-board interface communicates easily with the new Connect CRP intelligent systems, which can manage up to 8 thermostats divided into 2 zones, one direct and one mixed . Connect CRP is the brand new remote controller accessible via APP , available for both iOS and Android . The Connect CRP Zone, on the other hand, is a zone thermostat that communicates via RF with the Connect CRP. It can be placed in a classic 502 box, or left stand-alone on its practical table feet Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€8.225,00
-
Ferroli Air-Water Reversible Split Heat Pump Inverter Ferroli Omnia St 3.2 14 System With Single-Phase R-32 Electrical Integration With Control Included
ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : OMNIA S 3.2 14 Product code : 0XHTESWA Command included Optional accessories CONNECT CRP remote control Performance Heating Useful power in heating with water set at 35° C: 14.5 kW Useful power in heating with water set at 45° C: 14.1 kW Useful power in heating with water set at 55° C: 13.8 kW Absorbed power with water set at 35° C: 3.15 kW Absorbed power with water set at 45° C: 3.92 kW Absorbed power with water set at 55° C: 4.68 kW Water flow rate with water set at 35° C : 2494 l/h Water flow rate with water set at 45° C : 2425 /h Water flow rate with water set at 55° C : 1484 l/h Cooling down Useful power in cooling with water set at 7 °C: 12.4 kW Useful power in cooling with water set at 18 °C: 12.9 kW Absorbed power with water set at 7° C: 4.96 kW Absorbed power with water set at 18° C: 3.49 kW Water flow rate with water set at 7° C : 2133 l/h Water flow rate with water set at 18° C : 2322 l/h External unit technical data Compressor type : Twin Rotary DC Number of compressors : 1 Number of cooling circuits: 1 Type of fans : DC axial Number of fans : 1 Sound power level in heating : 56 ~ 65 dB(A) Sound power level in cooling : 56 ~ 65 dB(A) Liquid pipe diameter : 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Maximum piping length: 30 m Maximum pipe height difference: 20 m Indoor unit technical data Exchanger type : Brazed stainless steel plates Expansion vessel volume: 10 litres Water safety valve setting: 3 bar Minimum system water content: 40 litres System piping diameter: 1" gas F DHW piping diameter: 3/4" gas F Liquid pipe diameter : 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Dimensions and weight External unit dimensions (WxHxD): 1118x865x523 mm Outdoor unit weight: 96.0 Kg Internal unit dimensions (WxHxD): 595x1860x700 mm 5 years without worries Ferroli OMNIA ST 3.2 Air-water reversible heat pumps for split installation, with integrated DHW storage Efficiency marries comfort for integrated storage OMNIA ST 3.2 is the evolution of OMNIA S 3.2 and is part of the new range of Full Inverter R32 split heat pumps by Ferroli. When we speak of "split" we mean that the refrigerant circuit is divided between the two units, the external and the internal one. The outdoor unit contains the heart of the refrigerant circuit, from the compressor to the fan with the air side exchanger, which is connected to the refrigerant gas pipes towards the indoor unit. The indoor unit, on the other hand, contains the heart of the generator's hydraulic circuit with all the main pre-installed components, such as the high-efficiency circulator and the expansion tank, to safely allow quick and practical installation. The OMNIA ST 3.2 differ from the OMNIA S 3.2 in having integrated a storage tank for domestic hot water directly into the internal unit. This accumulation is 190L for sizes from 4 to 10, while it is 240L for uppers, from 12 to 16T. But that's not all, OMNIA ST 3.2 can be customized according to your needs, with an 18L inertial kit, kit for solar integration on the storage tank or with a kit for managing 2 different zones, classic direct and mixed, in case where we need 2 different temperatures on the terminals in the house Thanks to its wide operating range , among the widest on the market, OMNIA ST 3.2 works down to -25°C outside and produces hot water up to 65°C in nominal conditions. The new Full Inverter concept by Ferroli uses DC inverter modulations on the 3 main energy-intensive components of the machine, i.e. compressor, fan and pump. This makes it possible to modulate the power supplied by finely tracking the thermal load and allowing the user very high efficiencies and important energy savings . Furthermore, Ferroli's Full Inverter concept allows for the inrush currents to be reduced, avoiding sudden changes to the grid and guaranteeing a longer useful life for the components. With sound levels among the lowest on the market , OMNIA ST 3.2 is able to satisfy all system requirements, but can easily be integrated with a Ferroli boiler. The indoor unit, the heart of hydraulic distribution If the outdoor unit contains the heart of the refrigerant circuit, the indoor unit contains the heart of the water circuit. OMNIA ST 3.2 is much more than an exchanger with a pump. The hydronic module includes all the main components of the system and can be customized according to the user's needs. Stainless steel plate heat exchanger, pressure gauge and sensors, expansion tank, safety valve, automatic vent and brushless DC circulator are just some of the components you will find inside The control system The user interface has been equipped with capsense technology with 2.8” graphic display, which allows the user to interact with the product easily and extremely simply Modbus protocol It can be interfaced to BMS/BACS automation and management systems Heating and cooling Full Inverter modulation finely follows the desired setpoints, with the possibility of setting heating and cooling climatic curves, further optimizing consumption for the user Domestic hot water production When the DHW temperature probe calls the machine, it automatically switches to the domestic hot water tank with dedicated DHW set point. 3-way diverter valve supplied as standard Smart Grid input from photovoltaic and grid Digital Smart Grid inputs for the management of an input from the photovoltaic system and from the electricity grid. These allow you to optimize consumption and bill costs DHW tank electrical resistance The DHW electrical integration serves as integration, anti-legionella or reserve source in the event of an anomaly Fast DHW Priority to DHW production to bring the storage tank to the set point in the shortest possible time Anti-legionella function Allows you to set anti-legionella weekly cycles Silent mode Reduces the frequency of the compressor and the speed of the fan, so as to significantly reduce noise. Programmable on time slots ON/OFF From external contact. Activation and deactivation via an external contact, for example from a zone thermostat Hot / cold From external contacts. Summer/winter switching signal from outside, for example from the zone thermostat ECO function Dedicated setpoint for " Eco " operation. Settable with daily time band Anti-freeze protection Heat pump operation with circulator ON and possible electric booster The brand new Connect CRP and Connect CRP Zone The on-board interface communicates easily with the new Connect CRP intelligent systems, which can manage up to 8 thermostats divided into 2 zones, one direct and one mixed . Connect CRP is the brand new remote controller accessible via APP , available for both iOS and Android . The Connect CRP Zone, on the other hand, is a zone thermostat that communicates via RF with the Connect CRP. It can be placed in a classic 502 box, or left stand-alone on its practical table feet Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€7.321,00
-
Ferroli Air-Water Reversible Split Heat Pump Inverter Ferroli Omnia St 3.2 12t System With Three-Phase R-32 Electrical Integration With Control Included
ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : OMNIA S 3.2 12T Product code : 0XHUCSWA Command included Optional accessories CONNECT CRP remote control Performance Heating Useful power in heating with water set at 35° C: 12.1 kW Useful power in heating with water set at 45° C: 12.3 kW Useful power in heating with water set at 55° C: 11.9 kW Absorbed power with water set at 35° C: 2.44 kW Absorbed power with water set at 45° C: 3.32 kW Absorbed power with water set at 55° C: 3.90 kW Water flow rate with water set at 35° C : 2081 l/h Water flow rate with water set at 45° C : 2116 /h Water flow rate with water set at 55° C : 1279 l/h Cooling down Useful power in cooling with water set at 7 °C: 11.5 kW Useful power in cooling with water set at 18 °C: 12.0 kW Absorbed power with water set at 7° C: 4.18 kW Absorbed power with water set at 18° C: 3.04 kW Water flow rate with water set at 7° C : 1978 l/h Water flow rate with water set at 18° C : 2064 l/h External unit technical data Compressor type : Twin Rotary DC Number of compressors : 1 Number of cooling circuits: 1 Type of fans : DC axial Number of fans : 1 Sound power level in heating : 56 ~ 65 dB(A) Sound power level in cooling : 56 ~ 65 dB(A) Liquid pipe diameter : 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Maximum piping length: 30 m Maximum pipe height difference: 20 m Indoor unit technical data Exchanger type : Brazed stainless steel plates Expansion vessel volume: 10 litres Water safety valve setting: 3 bar Minimum system water content: 40 litres System piping diameter: 1" gas F DHW piping diameter: 3/4" gas F Liquid pipe diameter : 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Dimensions and weight External unit dimensions (WxHxD): 1118x865x523 mm Outdoor unit weight: 112.0 Kg Internal unit dimensions (WxHxD): 595x1860x700 mm 5 years without worries Ferroli OMNIA ST 3.2 Air-water reversible heat pumps for split installation, with integrated DHW storage Efficiency marries comfort for integrated storage OMNIA ST 3.2 is the evolution of OMNIA S 3.2 and is part of the new range of Full Inverter R32 split heat pumps by Ferroli. When we speak of "split" we mean that the refrigerant circuit is divided between the two units, the external and the internal one. The outdoor unit contains the heart of the refrigerant circuit, from the compressor to the fan with the air side exchanger, which is connected to the refrigerant gas pipes towards the indoor unit. The indoor unit, on the other hand, contains the heart of the generator's hydraulic circuit with all the main pre-installed components, such as the high-efficiency circulator and the expansion tank, to safely allow quick and practical installation. The OMNIA ST 3.2 differ from the OMNIA S 3.2 in having integrated a storage tank for domestic hot water directly into the internal unit. This accumulation is 190L for sizes from 4 to 10, while it is 240L for uppers, from 12 to 16T. But that's not all, OMNIA ST 3.2 can be customized according to your needs, with an 18L inertial kit, kit for solar integration on the storage tank or with a kit for managing 2 different zones, classic direct and mixed, in case where we need 2 different temperatures on the terminals in the house Thanks to its wide operating range , among the widest on the market, OMNIA ST 3.2 works down to -25°C outside and produces hot water up to 65°C in nominal conditions. The new Full Inverter concept by Ferroli uses DC inverter modulations on the 3 main energy-intensive components of the machine, i.e. compressor, fan and pump. This makes it possible to modulate the power supplied by finely tracking the thermal load and allowing the user very high efficiencies and important energy savings . Furthermore, Ferroli's Full Inverter concept allows for the inrush currents to be reduced, avoiding sudden changes to the grid and guaranteeing a longer useful life for the components. With sound levels among the lowest on the market , OMNIA ST 3.2 is able to satisfy all system requirements, but can easily be integrated with a Ferroli boiler. The indoor unit, the heart of hydraulic distribution If the outdoor unit contains the heart of the refrigerant circuit, the indoor unit contains the heart of the water circuit. OMNIA ST 3.2 is much more than an exchanger with a pump. The hydronic module includes all the main components of the system and can be customized according to the user's needs. Stainless steel plate heat exchanger, pressure gauge and sensors, expansion tank, safety valve, automatic vent and brushless DC circulator are just some of the components you will find inside The control system The user interface has been equipped with capsense technology with 2.8” graphic display, which allows the user to interact with the product easily and extremely simply Modbus protocol It can be interfaced to BMS/BACS automation and management systems Heating and cooling Full Inverter modulation finely follows the desired setpoints, with the possibility of setting heating and cooling climatic curves, further optimizing consumption for the user Domestic hot water production When the DHW temperature probe calls the machine, it automatically switches to the domestic hot water tank with dedicated DHW set point. 3-way diverter valve supplied as standard Smart Grid input from photovoltaic and grid Digital Smart Grid inputs for the management of an input from the photovoltaic system and from the electricity grid. These allow you to optimize consumption and bill costs DHW tank electrical resistance The DHW electrical integration serves as integration, anti-legionella or reserve source in the event of an anomaly Fast DHW Priority to DHW production to bring the storage tank to the set point in the shortest possible time Anti-legionella function Allows you to set anti-legionella weekly cycles Silent mode Reduces the frequency of the compressor and the speed of the fan, so as to significantly reduce noise. Programmable on time slots ON/OFF From external contact. Activation and deactivation via an external contact, for example from a zone thermostat Hot / cold From external contacts. Summer/winter switching signal from outside, for example from the zone thermostat ECO function Dedicated setpoint for " Eco " operation. Settable with daily time band Anti-freeze protection Heat pump operation with circulator ON and possible electric booster The brand new Connect CRP and Connect CRP Zone The on-board interface communicates easily with the new Connect CRP intelligent systems, which can manage up to 8 thermostats divided into 2 zones, one direct and one mixed . Connect CRP is the brand new remote controller accessible via APP , available for both iOS and Android . The Connect CRP Zone, on the other hand, is a zone thermostat that communicates via RF with the Connect CRP. It can be placed in a classic 502 box, or left stand-alone on its practical table feet Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€7.450,00
-
Ferroli Air-Water Reversible Split Heat Pump Inverter Ferroli Omnia St 3.2 12 System With Single-Phase R-32 Electrical Integration With Control Included
ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : OMNIA S 3.2 12 Product code : 0XHTCSWA Command included Optional accessories CONNECT CRP remote control Performance Heating Useful power in heating with water set at 35° C: 12.1 kW Useful power in heating with water set at 45° C: 12.3 kW Useful power in heating with water set at 55° C: 11.9 kW Absorbed power with water set at 35° C: 2.44 kW Absorbed power with water set at 45° C: 3.32 kW Absorbed power with water set at 55° C: 3.90 kW Water flow rate with water set at 35° C : 2081 l/h Water flow rate with water set at 45° C : 2116 /h Water flow rate with water set at 55° C : 1279 l/h Cooling down Useful power in cooling with water set at 7 °C: 11.5 kW Useful power in cooling with water set at 18 °C: 12.0 kW Absorbed power with water set at 7° C: 4.18 kW Absorbed power with water set at 18° C: 3.04 kW Water flow rate with water set at 7° C : 1978 l/h Water flow rate with water set at 18° C : 2064 l/h External unit technical data Compressor type : Twin Rotary DC Number of compressors : 1 Number of cooling circuits: 1 Type of fans : DC axial Number of fans : 1 Sound power level in heating : 56 ~ 65 dB(A) Sound power level in cooling : 56 ~ 65 dB(A) Liquid pipe diameter : 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Maximum piping length: 30 m Maximum pipe height difference: 20 m Indoor unit technical data Exchanger type : Brazed stainless steel plates Expansion vessel volume: 10 litres Water safety valve setting: 3 bar Minimum system water content: 40 litres System piping diameter: 1" gas F DHW piping diameter: 3/4" gas F Liquid pipe diameter : 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Dimensions and weight External unit dimensions (WxHxD): 1118x865x523 mm Outdoor unit weight: 96.0 Kg Internal unit dimensions (WxHxD): 595x1860x700 mm 5 years without worries Ferroli OMNIA ST 3.2 Air-water reversible heat pumps for split installation, with integrated DHW storage Efficiency marries comfort for integrated storage OMNIA ST 3.2 is the evolution of OMNIA S 3.2 and is part of the new range of Full Inverter R32 split heat pumps by Ferroli. When we speak of "split" we mean that the refrigerant circuit is divided between the two units, the external and the internal one. The outdoor unit contains the heart of the refrigerant circuit, from the compressor to the fan with the air side exchanger, which is connected to the refrigerant gas pipes towards the indoor unit. The indoor unit, on the other hand, contains the heart of the generator's hydraulic circuit with all the main pre-installed components, such as the high-efficiency circulator and the expansion tank, to safely allow quick and practical installation. The OMNIA ST 3.2 differ from the OMNIA S 3.2 in having integrated a storage tank for domestic hot water directly into the internal unit. This accumulation is 190L for sizes from 4 to 10, while it is 240L for uppers, from 12 to 16T. But that's not all, OMNIA ST 3.2 can be customized according to your needs, with an 18L inertial kit, kit for solar integration on the storage tank or with a kit for managing 2 different zones, classic direct and mixed, in case where we need 2 different temperatures on the terminals in the house Thanks to its wide operating range , among the widest on the market, OMNIA ST 3.2 works down to -25°C outside and produces hot water up to 65°C in nominal conditions. The new Full Inverter concept by Ferroli uses DC inverter modulations on the 3 main energy-intensive components of the machine, i.e. compressor, fan and pump. This makes it possible to modulate the power supplied by finely tracking the thermal load and allowing the user very high efficiencies and important energy savings . Furthermore, Ferroli's Full Inverter concept allows for the inrush currents to be reduced, avoiding sudden changes to the grid and guaranteeing a longer useful life for the components. With sound levels among the lowest on the market , OMNIA ST 3.2 is able to satisfy all system requirements, but can easily be integrated with a Ferroli boiler. The indoor unit, the heart of hydraulic distribution If the outdoor unit contains the heart of the refrigerant circuit, the indoor unit contains the heart of the water circuit. OMNIA ST 3.2 is much more than an exchanger with a pump. The hydronic module includes all the main components of the system and can be customized according to the user's needs. Stainless steel plate heat exchanger, pressure gauge and sensors, expansion vessel, safety valve, automatic vent and brushless DC circulator are just some of the components you will find inside The control system The user interface has been equipped with capsense technology with 2.8” graphic display, which allows the user to interact with the product easily and extremely simply Modbus protocol It can be interfaced to BMS/BACS automation and management systems Heating and cooling Full Inverter modulation finely follows the desired setpoints, with the possibility of setting heating and cooling climatic curves, further optimizing consumption for the user Domestic hot water production When the DHW temperature probe calls the machine, it automatically switches to the domestic hot water tank with dedicated DHW set point. 3-way diverter valve supplied as standard Smart Grid input from photovoltaic and grid Digital Smart Grid inputs for the management of an input from the photovoltaic system and from the electricity grid. These allow you to optimize consumption and bill costs DHW tank electrical resistance The DHW electrical integration serves as integration, anti-legionella or reserve source in the event of an anomaly Fast DHW Priority to DHW production to bring the storage tank to the set point in the shortest possible time Anti-legionella function Allows you to set anti-legionella weekly cycles Silent mode Reduces the frequency of the compressor and the speed of the fan, so as to significantly reduce noise. Programmable on time slots ON/OFF From external contact. Activation and deactivation via an external contact, for example from a zone thermostat Hot / cold From external contacts. Summer/winter switching signal from outside, for example from the zone thermostat ECO function Dedicated setpoint for " Eco " operation. Settable with daily time band Anti-freeze protection Heat pump operation with circulator ON and possible electric booster The brand new Connect CRP and Connect CRP Zone The on-board interface communicates easily with the new Connect CRP intelligent systems, which can manage up to 8 thermostats divided into 2 zones, one direct and one mixed . Connect CRP is the brand new remote controller accessible via APP , available for both iOS and Android . The Connect CRP Zone, on the other hand, is a zone thermostat that communicates via RF with the Connect CRP. It can be placed in a classic 502 box, or left stand-alone on its practical table feet Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€7.031,00
-
Ferroli Air-Water Reversible Heat Pump Inverter For Split Installation Ferroli Omnia S In 3.2 10 R-32 With Control Included
ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : OMNIA S IN 3.2 10 Product code : 0XHVASWA Command included Optional accessories Unpainted built-in cabinet 016092X0 Painted built-in cabinet 016093X0 DHW storage tank integration kit 012086W0 Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A+++ ACS energy class: A Water profile declared in ACS : L SCOP heating with water set at 35 °C : 5.19 SEER cooling with water set at 7 °C: 5.96 Performance Heating Useful power in heating with water set at 35° C: 10.0 kW Useful power in heating with water set at 45° C: 10.0 kW Absorbed power with water set at 35° C: 2.02 kW Absorbed power with water set at 45° C: 2.67 kW Water flow rate with water set at 35° C : 1720 l/h Water flow rate with water set at 45° C : 1720 l/h Cooling down Useful power in cooling with water set at 7 °C: 8.20 kW Useful power in cooling with water set at 18 °C: 9.90 kW Absorbed power with water set at 7° C: 2.52 kW Absorbed power with water set at 18° C: 2.18 kW Water flow rate with water set at 7° C : 1410 l/h Water flow rate with water set at 18° C : 1703 l/h External unit technical data Compressor type : Twin Rotary DC Number of compressors : 1 Number of cooling circuits: 1 Type of fans : DC axial Number of fans : 1 Sound power level in heating : 60 dB(A) Sound power level in cooling : 60 dB(A) Maximum piping length: 30 m Maximum pipe height difference: 20 m Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Dimensions and weight External unit dimensions (WxHxD): 1118x865x523 mm Outdoor unit weight: 77.0 Kg 5 years without worries Ferroli OMNIA S IN 3.2 Reversible heat pumps for split installation, built-in solution Maximum architectural integration with a perfect All in One system OMNIA S IN 3.2 is the new split heat pump that completes the range of OMNIA S in R32 , offering performance with a reduced environmental impact, up to 75% lower than equivalent machines in R410A. The new Full Inverter concept by Ferroli uses DC inverter modulations on the 3 main energy-intensive components of the machine, namely the compressor, fan and pump . This makes it possible to modulate the power supplied by finely tracking the thermal load, guaranteeing the user very high efficiency and significant energy savings on the bill. But that's not all, OMNIA S IN 3.2 is the queen of Architectural Integration . Although inside it contains a 150-litre domestic hot water storage tank, the internal unit and the hydronic kits with circulators and bulky expansion vessels, the installation is so compact that everything fits into a practical cabinet or built-in wardrobe , disappearing. Furthermore, OMNIA S IN 3.2 can be customised : still inside the cabinet, it is possible to add a 30-litre inertial kit for heating/cooling water, integrate a solar thermal system directly into the domestic hot water storage tank and install various distribution groups , e.g. for direct and/or mixed zones The machine can then be managed with the integrated HMI interface or with the CONNECT CRP intelligent remote controller, which can also be accessed via the App . Finally, we can manage the rooms independently through the CONNECT CRP ZONEs , practical and design thermostats that will guarantee comfort in your rooms The control system The user interface has been equipped with capsense technology with 2.8” graphic display, which allows the user to interact with the product easily and extremely simply Modbus protocol It can be interfaced to BMS/BACS automation and management systems Heating and cooling Full Inverter modulation finely follows the desired setpoints, with the possibility of setting heating and cooling climatic curves, further optimizing consumption for the user Domestic hot water production When the DHW temperature probe calls the machine, it automatically switches to the domestic hot water tank with dedicated DHW set point. 3-way diverter valve supplied as standard Smart Grid input from photovoltaic and grid Digital Smart Grid inputs for the management of an input from the photovoltaic system and from the electricity grid. These allow you to optimize consumption and bill costs DHW tank electrical resistance The DHW electrical integration serves as integration, anti-legionella or reserve source in the event of an anomaly Fast DHW Priority to DHW production to bring the storage tank to the set point in the shortest possible time Anti-legionella function Allows you to set anti-legionella weekly cycles Silent mode Reduces the frequency of the compressor and the speed of the fan, so as to significantly reduce noise. Programmable on time slots ON/OFF From external contact. Activation and deactivation via an external contact, for example from a zone thermostat Hot / cold From external contacts. Summer/winter switching signal from outside, for example from the zone thermostat ECO function Dedicated setpoint for " Eco " operation. Settable with daily time band Anti-freeze protection Heat pump operation with circulator ON and possible electric booster The brand new Connect CRP and Connect CRP Zone The on-board interface communicates easily with the new Connect CRP intelligent systems, which can manage up to 8 thermostats divided into 2 zones, one direct and one mixed . Connect CRP is the brand new remote controller accessible via APP, available for both iOS and Android. The Connect CRP Zone, on the other hand, is a zone thermostat that communicates via RF with the Connect CRP. It can be placed in a classic 502 box, or left stand-alone on its practical table feet Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€5.650,00
-
Ferroli Air-Water Reversible Heat Pump Inverter For Split Installation Ferroli Omnia S In 3.2 08 R-32 With Control Included
ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : OMNIA S IN 3.2 08 Product code : 0XHV8SWA Command included Optional accessories Unpainted built-in cabinet 016092X0 Painted built-in cabinet 016093X0 DHW storage tank integration kit 012086W0 Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A+++ ACS energy class: A Water profile declared in ACS : L SCOP heating with water set at 35 °C : 5.21 SEER cooling with water set at 7 °C: 5.83 Performance Heating Useful power in heating with water set at 35° C: 8.40 kW Useful power in heating with water set at 45° C: 8.30 kW Absorbed power with water set at 35° C: 1.63 kW Absorbed power with water set at 45° C: 2.16 kW Water flow rate with water set at 35° C : 1445 l/h Water flow rate with water set at 45° C : 1428 l/h Cooling down Useful power in cooling with water set at 7 °C: 7.45 kW Useful power in cooling with water set at 18 °C: 8.30 kW Absorbed power with water set at 7° C: 2.22 kW Absorbed power with water set at 18° C: 1.64 kW Water flow rate with water set at 7° C : 1281 l/h Water flow rate with water set at 18° C : 1428 l/h External unit technical data Compressor type : Twin Rotary DC Number of compressors : 1 Number of cooling circuits: 1 Type of fans : DC axial Number of fans : 1 Sound power level in heating : 59 dB(A) Sound power level in cooling : 60 dB(A) Maximum piping length: 30 m Maximum pipe height difference: 20 m Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Dimensions and weight External unit dimensions (WxHxD): 1118x865x523 mm Outdoor unit weight: 77.0 Kg 5 years without worries Ferroli OMNIA S IN 3.2 Reversible heat pumps for split installation, built-in solution Maximum architectural integration with a perfect All in One system OMNIA S IN 3.2 is the new split heat pump that completes the range of OMNIA S in R32 , offering performance with a reduced environmental impact, up to 75% lower than equivalent machines in R410A. The new Full Inverter concept by Ferroli uses DC inverter modulations on the 3 main energy-intensive components of the machine, namely the compressor, fan and pump . This makes it possible to modulate the power supplied by finely tracking the thermal load, guaranteeing the user very high efficiencies and significant energy savings on the bill. But that's not all, OMNIA S IN 3.2 is the queen of Architectural Integration . Although inside it contains a 150-litre domestic hot water storage tank, the internal unit and the hydronic kits with circulators and bulky expansion vessels, the installation is so compact that everything fits into a practical cabinet or built-in wardrobe , disappearing. Furthermore, OMNIA S IN 3.2 can be customised : still inside the cabinet, it is possible to add a 30-litre inertial kit for heating/cooling water, integrate a solar thermal system directly into the domestic hot water storage tank and install various distribution groups , e.g. for direct and/or mixed zones The machine can then be managed with the integrated HMI interface or with the CONNECT CRP intelligent remote controller, which can also be accessed via the App . Finally, we can manage the rooms independently through the CONNECT CRP ZONEs , practical and design thermostats that will guarantee comfort in your rooms The control system The user interface has been equipped with capsense technology with 2.8” graphic display, which allows the user to interact with the product easily and extremely simply Modbus protocol It can be interfaced to BMS/BACS automation and management systems Heating and cooling Full Inverter modulation finely follows the desired setpoints, with the possibility of setting heating and cooling climatic curves, further optimizing consumption for the user Domestic hot water production When the DHW temperature probe calls the machine, it automatically switches to the domestic hot water tank with dedicated DHW set point. 3-way diverter valve supplied as standard Smart Grid input from photovoltaic and grid Digital Smart Grid inputs for the management of an input from the photovoltaic system and from the electricity grid. These allow you to optimize consumption and bill costs DHW tank electrical resistance The DHW electrical integration serves as integration, anti-legionella or reserve source in the event of an anomaly Fast DHW Priority to DHW production to bring the storage tank to the set point in the shortest possible time Anti-legionella function Allows you to set anti-legionella weekly cycles Silent mode Reduces the frequency of the compressor and the speed of the fan, so as to significantly reduce noise. Programmable on time slots ON/OFF From external contact. Activation and deactivation via an external contact, for example from a zone thermostat Hot / cold From external contacts. Summer/winter switching signal from outside, for example from the zone thermostat ECO function Dedicated setpoint for " Eco " operation. Settable with daily time band Anti-freeze protection Heat pump operation with circulator ON and possible electric booster The brand new Connect CRP and Connect CRP Zone The on-board interface communicates easily with the new Connect CRP intelligent systems, which can manage up to 8 thermostats divided into 2 zones, one direct and one mixed . Connect CRP is the brand new remote controller accessible via APP, available for both iOS and Android. The Connect CRP Zone, on the other hand, is a zone thermostat that communicates via RF with the Connect CRP. It can be placed in a classic 502 box, or left stand-alone on its practical table feet Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€5.040,00
-
Ferroli Air-Water Reversible Heat Pump Inverter Ferroli Omnia S 3.2 14 Single-Phase R-32 With Control Included
ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : OMNIA S 3.2 14 Product code : 0XHKESWA Command included Optional accessories Unpainted built-in cabinet 016092X0 Painted built-in cabinet 016093X0 Optional accessories Unpainted built-in cabinet 016092X0 Painted built-in cabinet 016093X0 Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ SCOP heating with water set at 35 °C : 4.72 SEER cooling with water set at 7 °C: 4.86 Performance Heating Useful power in heating with water set at 35° C: 14.5 kW Useful power in heating with water set at 45° C: 14.1 kW Useful power in heating with water set at 55° C: 13.8 kW Absorbed power with water set at 35° C: 3.15 kW Absorbed power with water set at 45° C: 3.92 kW Absorbed power with water set at 55° C: 4.68 kW Water flow rate with water set at 35° C : 2494 l/h Water flow rate with water set at 45° C : 2425 /h Water flow rate with water set at 55° C : 1484 l/h Cooling down Useful power in cooling with water set at 7 °C: 12.4 kW Useful power in cooling with water set at 18 °C: 12.9 kW Absorbed power with water set at 7° C: 4.96 kW Absorbed power with water set at 18° C: 3.49 kW Water flow rate with water set at 7° C : 2133 l/h Water flow rate with water set at 18° C : 2322 l/h External unit technical data Compressor type : Twin Rotary DC Number of compressors : 1 Number of cooling circuits: 1 Type of fans : DC axial Number of fans : 1 Sound power level in heating : 56 ~ 65 dB(A) Sound power level in cooling : 56 ~ 65 dB(A) Liquid pipe diameter : 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Maximum piping length: 30 m Maximum pipe height difference: 20 m Indoor unit technical data Exchanger type : Brazed stainless steel plates Expansion vessel volume: 10 litres Water safety valve setting: 3 bar Minimum system water content: 40 litres System piping diameter: 1" gas F DHW piping diameter: 3/4" gas F Liquid pipe diameter : 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Dimensions and weight External unit dimensions (WxHxD): 1118x865x523 mm Outdoor unit weight: 96.0 Kg Internal unit dimensions (WxHxD): 422x702x320 mm 5 years without worries Ferroli OMNIA S 3.2 Reversible heat pumps for split installation with DC inverter compressor Quietness, efficiency and design OMNIA S 3.2 is the new range of split heat pumps Full Inverter R32 by Ferroli. The range includes an Outdoor Unit with the heart of the refrigerant circuit, from the compressor to the fan with the air side exchanger, which is connected to the refrigerant gas pipes towards the Indoor Unit. The Indoor Unit, on the other hand, contains the heart of the hydraulic circuit of the generator with all the main pre-installed components, such as the high-efficiency circulator and the expansion vessel, to safely allow quick and practical installation The split installation of OMNIA S 3.2 , with only the gas pipes between the outdoor and indoor unit, is synonymous with security against any freezing problem, even at the coldest temperatures (down to -25°C) and in the absence of electricity. All units meet the most extreme winter and summer air conditioning requirements, they can in fact produce hot water up to 65°C , which makes them suitable for practically all heating systems, whether radiant, fan coil or radiator, including the production of domestic hot water (DHW), via an external boiler The new conception Full Inverter by Ferroli uses DC inverter modulations on the 3 main energy-intensive components of the machine, i.e. compressor, fan and pump. This allows you to modulate the power supplied by finely tracking the thermal load and allowing the user very high efficiencies and important energy savings . Also, the concept Full Inverter by Ferroli guarantees sound levels among the lowest on the market, avoiding sudden changes in the network and guaranteeing a longer useful life for the components. Indoor and outdoor unit of OMNIA 3.2 The Outdoor Unit contains the heart of the refrigerant circuit, while the Internal Unit the heart of the hydraulic circuit. They are connected to each other by pipes R32 ecological refrigerant gas , which has allowed us to combine high efficiency with a reduced environmental impact. Thanks to his GWP of 675 , about a third of the GWP of R410a, helps reduce CO2 equivalent emissions, the main causes of global warming The heat pumps use the Outdoor Unit to extract heat from the air outside the home and convey it to the water in your system, via an exchanger in the Indoor Unit. That's exactly why they manage to get such high efficiencies , exploiting so renewable the energy already present in the air outside the home The new conception Full Inverter by Ferroli then does the rest, tracking the thermal loads precisely and without waste (modulating the compressor, pump and fan), manages to achieve even greater efficiencies, guaranteeing important savings in bills , without stress on the components and with very low sound levels OMNIA S 3.2 it can be used both as the sole generator of the system and integrated with other sources such as a Ferroli boiler The control system The user interface has been equipped with capsense technology with 2.8” graphic display, which allows the user to interact with the product easily and extremely simply Modbus protocol It can be interfaced to BMS/BACS automation and management systems Heating and cooling Full Inverter modulation finely follows the desired setpoints, with the possibility of setting heating and cooling climatic curves, further optimizing consumption for the user Domestic hot water production When the DHW temperature probe calls the machine, it automatically switches to the domestic hot water tank with dedicated DHW set point. 3-way diverter valve supplied as standard Smart Grid input from photovoltaic and grid Digital Smart Grid inputs for the management of an input from the photovoltaic system and from the electricity grid. These allow you to optimize consumption and bill costs DHW tank electrical resistance The DHW electrical integration serves as integration, anti-legionella or reserve source in the event of an anomaly Fast DHW Priority to DHW production to bring the storage tank to the set point in the shortest possible time Anti-legionella function Allows you to set anti-legionella weekly cycles Silent mode Reduces the frequency of the compressor and the speed of the fan, so as to significantly reduce noise. Programmable on time slots ON/OFF From external contact. Activation and deactivation via an external contact, for example from a zone thermostat Hot / cold From external contacts. Summer/winter switching signal from outside, for example from the zone thermostat ECO function Dedicated setpoint for " Eco " operation. Settable with daily time band Anti-freeze protection Heat pump operation with circulator ON and possible electric booster Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€5.158,00
You have seen 36 out of 206 products