SAVIO ACTA GAS BOILER AND 28 A* LPG OPEN CHAMBER Model: ACTA 28A Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary Energy Efficiency Class B Withdrawal profile: XL Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 30.6 kW Heating/DHW maximum useful power: 27.6 kW Yield name 60°/80°C: 90% Yield at 30% load: 89.3% Energy efficiency stars: (dir 92/42/EEC) ** NOx class n° 3 Weighted NOx: 148 mg/kWh Minimum/maximum heating temperature: 38/85 °C Minimum/maximum heating pressure: 0.3/3.0 bar Capacity of the expansion tank (total): 8lt DHW minimum/maximum temperature: 35/60°C Maximum flow rate (ΔT=25K) / (ΔT=35K): 15.8/11.3 l/min Specific sanitary flow rate (ΔT=30 K): 12.5 l/min Voltage / Power at nominal heat input V~/ W 230~/56 Degree of protection n° IPX4D Minimum/maximum smoke temperature: 83/108°C Extremely compact dimensions hxwxd: mm 703x400x325 ; 29.4kg CNG or LPG power supply ACTA NEW ACTA is the range of Savio boilers designed to meet modern housing needs that require reliable, compact and high performance products. The ACTA range includes open chamber boilers with powers of 24 kW and 28 kW. The ACTA series is suitable for heating and domestic hot water production. ACTA has very compact dimensions which make it easy to place in any environment. Characteristics: High yields Primary heat exchanger in copper, high circulation lamellar Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Integration with SAVIO solar systems using a solar kit Digital control panel with display. The electronic card allows you to: Adjust the ignition pressure Adjust the restart frequency Manage the post-circulation of the high efficiency pump View fault diagnostics and lockout status. Also available: Boiler antifreeze safety Primary circuit thermal inertia disposal. Primary exchanger ACTA is a high efficiency boiler: the most compact exchanger, with reduced fin pitch to increase their number and ensure maximum efficiency. The large heat exchange surface is guaranteed by the helical section of the passage pipes and by the lamellar structure. The high exchange efficiency is guaranteed by the double circulation in counter flow. The exchanger is made of copper with a protective coating resistant to high temperatures. Secondary exchanger ACTA is available in a mixed version for heating and domestic hot water production: the hot water is supplied at an adjustable and constant temperature thanks to the electronic modulation of the boiler. The DHW exchanger is made of stainless steel and has a low inertia which guarantees excellent performance. Control panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display Display annual periodic maintenance expiry Thermo-hydrometer for reading the water pressure on the primary side. Integration with solar ACTA can be easily combined with a solar system using the Biasi solar kit. Simple and immediate to install, it does not require electrical parts and allows optimizing the integration of the solar system with the boiler which intervenes only when necessary to guarantee the required comfort temperature. Reliability and security Hydraulic groups of innovative conception: Motorized 3-way valve Integrated automatic by-pass: allows the boiler to adapt to the needs of modern heating systems Absolute heating pressure switch: guarantees protection of the boiler in the event of a lack of water or circulation Sanitary flowmeter Easily accessible filling tap Drain tap Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

SAVIO ACTA GAS BOILER AND 28 A* METHANE OPEN CHAMBER Model: ACTA 28A Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary Energy Efficiency Class B Withdrawal profile: XL Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 30.6 kW Heating/DHW maximum useful power: 27.6 kW Yield name 60°/80°C: 90% Yield at 30% load: 89.3% Energy efficiency stars: (dir 92/42/EEC) ** NOx class n° 3 Weighted NOx: 148 mg/kWh Minimum/maximum heating temperature: 38/85 °C Minimum/maximum heating pressure: 0.3/3.0 bar Capacity of the expansion tank (total): 8lt DHW minimum/maximum temperature: 35/60°C Maximum flow rate (ΔT=25K) / (ΔT=35K): 15.8/11.3 l/min Specific sanitary flow rate (ΔT=30 K): 12.5 l/min Voltage / Power at nominal heat input V~/ W 230~/56 Degree of protection n° IPX4D Minimum/maximum smoke temperature: 83/108°C Extremely compact dimensions hxwxd: mm 703x400x325 ; 29.4kg CNG or LPG power supply ACTA ACTA is the range of Savio boilers designed to meet modern housing needs that require reliable, compact and high performance products. The ACTA range includes open chamber boilers with powers of 24 kW and 28 kW. The ACTA series is suitable for heating and domestic hot water production. ACTA NEW has very compact dimensions which make it easy to place in any environment. Characteristics: High yields Primary heat exchanger in copper, high circulation lamellar Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Integration with SAVIO solar systems using a solar kit Digital control panel with display. The electronic card allows you to: Adjust the ignition pressure Adjust the restart frequency Manage the post-circulation of the high efficiency pump View fault diagnostics and lockout status. Also available: Boiler antifreeze safety Primary circuit thermal inertia disposal. Primary exchanger ACTA is a high efficiency boiler: the most compact exchanger, with reduced fin pitch to increase their number and ensure maximum efficiency. The large heat exchange surface is guaranteed by the helical section of the passage pipes and by the lamellar structure. The high exchange efficiency is guaranteed by the double circulation in counter flow. The exchanger is made of copper with a protective coating resistant to high temperatures. Secondary exchanger ACTA is available in a mixed version for heating and domestic hot water production: the hot water is supplied at an adjustable and constant temperature thanks to the electronic modulation of the boiler. The DHW exchanger is made of stainless steel and has a low inertia which guarantees excellent performance. Control panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display Display annual periodic maintenance expiry Thermo-hydrometer for reading the water pressure on the primary side. Integration with solar ACTA can be easily combined with a solar system using the Biasi solar kit. Simple and immediate to install, it does not require electrical parts and allows optimizing the integration of the solar system with the boiler which intervenes only when necessary to guarantee the required comfort temperature. Reliability and security Hydraulic groups of innovative conception: Motorized 3-way valve Integrated automatic by-pass: allows the boiler to adapt to the needs of modern heating systems Absolute heating pressure switch: guarantees protection of the boiler in the event of a lack of water or circulation Sanitary flowmeter Easily accessible filling tap Drain tap Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! For the transformation of methane / LPG / free propane air to be requested from the Authorized Assistance Centre Technical features Model : Enerwa 28 Gas : Methane / LPG Hydraulic unit material : Brass Class : NOx 5 Gas circuit Natural gas consumption: 0.397 ~ 3.05 m 3 /h LPG gas consumption: 0.144 ~ 1.18 m 3 /h Efficiency : 107.4 ~ 107.5% Radiator circuit Maximum thermal load Natural gas: 28.7 kW LPG maximum thermal load: 29.4 kW Natural gas maximum thermal power (80/60° C): 28 kW LPG maximum thermal power (80/60° C): 28 kW Natural gas maximum thermal power (50/30° C): 30 kW LPG maximum thermal power (50/30° C): 28.6 kW Thermal regulation range : 25° ~ 80° C Maximum working pressure: 3 bar Domestic hot water circuit Maximum domestic hot water capacity: 34.9 kW Maximum domestic hot water flow rate (∆t: 30°C): 16.8 l/min Maximum domestic hot water flow rate (∆t: 25°C): 20.1 l/min DHW temperature adjustment : 35° ~ 60 °C Electrical circuit Power supply (V,Hz, Ø) : 220~240/50/1 Power Consumption : 60 ~ 104W Dimensions and weight Dimensions (HxWxD): 725x420x288 mm Weight : 33.2Kg Warmhaus Enerwa and EnerwaPlus boilers The New Era of Boilers Combined wall boiler Enerwa and Enerwa Plus thanks to their small dimensions of only 288mm deep and their modern design are ideal for installation on balconies or inside kitchens Reliable and efficient The new self-adaptive system of the electronic gas valve precisely adjusts the combustion ratio between air and gas. No pre-heating system, the boiler keeps the water hot for the entire time of use. Effective circulation Circulator with frequency converter, it is a high efficiency pump with a head of 7 mwc Intelligent LCD display Large LCD display, the display shows the heating temperature, DHW and internal pressure System expansion 8 liter expansion tank. The new expansion vessel is capable of supplying 130/140lt of water to the system Adaptive Gas Control With its signal it can provide simultaneous control of ionization and gas valve Highly economical It is a question of having an electrical consumption reduced to a maximum of 82W Hot water and continuous flow Asymmetrical exchanger system, provides a high flow input with its large water passages Pressure sensor to optimize performance Possibility to set the altitude of the boilers to optimize efficiency Silent operation Thanks to the 10mm internal lining, you work very silently and with excellent thermal insulation Processor specifications SMART WARMHAUS High efficiency High efficiency radial heat exchanger with low risk of clogging and leak proof. Panel features Selection buttons for mode, reset, heating and DHW Intuitive buttons for selecting the heating and DHW temperature Temperatures on LCD screen Flame modulation indicator Digital pressure gauge Self-diagnostic codes and system identification Different working parameters for boilers Differences between Enerwa and EnerwaPlus Energy Aesthetics Control Panel: 2 Knobs, 2 Buttons LCD display : 30 mm x 44 mm , Blue LCD screen , backlit Water pressure switch: EO2 low pressure alarm. Water pressure visible on the pressure gauge Self-regulating circulator EnerwaPlus Aesthetics Control Panel : 6 Buttons LCD display : 40 mm x 75 mm , Orange LCD screen , backlit Water pressure switch : Water pressure sensor. EO2 low pressure alarm. E03 high pressure alarm. Water pressure visible on pressure gauge and LCD screen Circulator with PWM (Pulse-Width-modulation) control Pulse-width modulation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER JUNKERS CERACLASS EXCELLENCE ZWC 28-3 MFK METHANE OPEN CHAMBER - ErP Technical features Declared load profile XL Nominal heat output: 28 kW Nominal heat input: 31.3 kW Continuous sanitary production: 13.4 l/min Sanitary temperature range that can be set: 40/60°C Useful thermal efficiency at nominal power: 90.5% Useful thermal efficiency at 30% nominal load: 89.6% NOx class: 3 Degree of protection: IP X4D Version: CNG Important information External installation, in a partially protected place in compliance with current legislation, Natural draft boilers programmed to be connected exclusively to multiple flues for several homes, for the escape of smoke due to combustion outside the room in which the boiler is installed. The boiler draws the combustion air directly from the installation room and is equipped with an anti-wind chimney. ZWC 24-3 MFK E, ZWC 28-3 MFK E are characteristics of wall-hung open chamber boilers with natural draft, with micro-accumulator for the production of domestic hot water. General characteristics CERACLASSEXCELLENCE is the JUNKERS boiler designed for heating and domestic hot water production. Easy to use and low consumption make it one of the best boilers to guarantee maximum comfort. Furthermore, by pressing the COM/ECO function, hot water can be managed in a simple way.  Functions: Managed with Bosch Control CT100 (accessory), digital modulating room thermoregulator, with soft touch display that can be positioned on the wall, with an elegant and refined design; accompanied by a smart and functional app. Primary and secondary heat exchangers. Circulator in Energy Class A; 8 liter expansion tank (10.5 liters for ZWC 35); Dynamic microstorage tank with domestic hot water pre-heating function; Heating filling cock (in the boiler); Continuous power modulation; Bosch Heatronic 3® module, BUS system, with multifunction display; Antifreeze for the heating circuit and antiblock for the circulator; Patented passive solar optimization algorithm SolarInside-ControlUnit; Possible remote management via MB LAN or Netcom 100 modules (accessories) which can be combined with CR100 or CW thermoregulators. Dimensions (LxWxH): 370 x 400 x 850 mm; 38.8kg Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

AVAILABLE TO ORDER Hermann Saunier Duval condensing boiler SEMIATEK CONDENS 28-AS/1 28 kW LPG Complete with Smoke Kit - New PLEASE NOTE! THE BOILER WILL BE SUPPLIED WITH METHANE, THE TRANSFORMATION TO LPG WILL TAKE PLACE THROUGH THE SERVICE CENTER FOR FREE! Select the smoke kit in the drop-down menu! Technical features Model : Semiatek Condens Power : 28 kW Gas : LPG Heating efficiency class: A Sanitary efficiency class: A Sanitary load profile XL Fireplace flow rate Qmin/max - 75/55°C : 7.2 - 24.5 kW Rated power Pmin/max - 75/55°C : 6.9 - 23.9 kW Rated power Pmin/max - 50/30°C : 7.7 - 25.9 kW Efficiency Pmax - 80/60°C - 50/30°C : 97.6 / 105.9 % Efficiency P30% - 40/30°C : -/-/108,1 % Min/max flow temp. : 30 - 75 Min/max boiler operating pressure: 0.3/3 bar Heating expansion vessel - Capacity/pre-charge : 8/0.75 l/bar Domestic hot water production type: Instantaneous ACS quality classification (EN 13203-1) : Capacity at the hearth min/max - 60°C : 8.0 - 31.1 kW Rated power min/max - 60°C : 7.2 - 28.0 kW Continuous flow rate (∆T= 25K) : 16.1 l/min Specific flow rate (∆T = 30K) (EN13203) : 13.4 l/min Peak flow rate in 10 minutes (∆T = 30K) : 134 l/10 min Min/max DHW temperature : 35 - 55 °C Gas category : II 2H 3P Absorption - Peak/Pmax/Pmin/Stand-by : - / 90 / - / 1,7 W Weight : 26.5Kg Semiatek Condens 28 kw The optimal solution for heating and domestic hot water preparation. Excellent value for money, both for new builds and replacements It can be retrofitted into existing heating and hot water supply systems Heat exchanger in stainless steel 3 year guarantee The SemiaTek Condens boiler is available in 24 and 28 kW methane power. The most important novelty concerns the renewed primary exchanger , the old one in Al-Si has been replaced by the one in stainless steel which, through a simple adjustment of the gas valve, also allows operation with propane. Innovation also from the point of view of combustion : complete premixing with new fan-push technology where the fan in the new position upstream of the burner guarantees the right ratio between air and gas by applying a proportional pressure value which guarantees the opening of the gas valve without waste. The project has been developed to offer the optimal solution in terms of price , performance and quality . SemiaTek Condens also features a new design of the ultra-compact hydraulic block with new location of the key components, while still maintaining a good level of efficiency, performance and adequate comfort in both heating and domestic hot water production. Characteristics The new design of SemiaTek Condens offers an innovative touch screen interface of extreme simplicity with 6 keys, display with black background and 2 white digits with intermittent ignition, the indication of the boiler status is defined by the intermittent ignition of the icon selected. SemiaTek Condens is compatible with all Hermann Saunier Duval components and accessories already on the market. SemiaTek Condens can also be combined with the MiGo WiFi control unit. The wall-mounted boiler is ready to be managed remotely simply with a smartphone. Ease of installation SemiaTek Condens is very simple to install thanks to its small size - 62.6cm high, 40cm wide and 27cm deep - and low weight. Even the vertical hydraulic connections have been designed to facilitate and speed up installation. For these reasons, it is the ideal solution for replacing old systems. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE MA LA PARTE POSTERIORE DELLA CALDAIA PRESENTA DANNEGGIAMENTI. (PER MAGGIORI INFORMAZIONI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE) LA CALDAIA NASCE A METANO. QUINDI, È NECESSARIO RICHIEDERE IL KIT DI TRASFORMAZIONE. PER INFO, CONTATTARE PREVENTIVAMENTE IL CENTRO ASSISTENZA AUTORIZZATO DI ZONA  Caratteristiche tecniche Modello : ecoTEC Intro VMW 24/28 AS/1-1 Codice articolo : 0010026088 Alimentazione : Metano Performance Potenza riscaldamento : 6,9 ~ 23,9 kW Portata termica nominale in sanitario : 6,9 ~ 28,0 kW Classe di efficienza energetica in riscaldamento : A Classe di efficienza energetica in sanitario : A Profilo di carico sanitario : XL Classe NOx : 6 Rendimento al 30% : 108,2% Produzione acqua calda sanitaria (ΔT = 30K) : 13,4 l/min Regolazione temperatura acqua calda sanitaria : 35°C ~ 60°C Modulazione : 1:4 Pressione di precarica vaso d’espansione : 0,75 bar Pressione idrica minima : 0,3 bar Potenza elettrica totale : 90 W Capacità vaso di espansione : 8 litri Dimensioni e peso Dimensioni (AxLxP) : 626x400x270 mm Peso : 25,6 Kg Estensione di garanzia a 7 anni   Caldaia murale a condensazione ecoTEC Intro VMW La più compatta e leggera, oggi anche per esterno Le nuove caldaie a condensazione ecoTEC intro VMW (per il riscaldamento e la produzione di acqua calda sanitaria) sono disponibili nelle potenze da 24 e 28 kW aumentando il ventaglio di scelta di prodotto all’interno della consolidata gamma delle caldaie a condensazione di Vaillant. Questo prodotto dà infatti la possibilità di avvicinarsi al mondo delle caldaie a condensazione offerto da Vaillant anche per i nuovi utenti, senza andare incontro a costi eccessivi per la sostituzione della vecchia caldaia. ecoTEC intro mantiene il focus sul risparmio energetico montando una pompa modulante ad alta efficienza che minimizza i consumi elettrici annuali, con conseguente impatto positivo in bolletta. Anche per quanto riguarda il risparmio di gas Vaillant propone la nuova tecnologia di combustione, denominata fan push, dove è il ventilatore che grazie ai diversi livelli di pressione esercitata sulla valvola gas garantisce il giusto rapporto tra aria comburente e gas. Il case di ecoTEC intro è semplice ed essenziale, le dimensioni risultano essere estremamente ridotte che non vanno però ad inficiare o ridurre la qualità ed efficienza del prodotto, garantito da Vaillant. Il pannello frontale introduce un’innovativa interfaccia touch screen di estrema semplicità con 6 tasti, display a sfondo nero e 2 digit in bianco con accensione ad intermittenza. Nella parte inferiore della caldaia è stato aggiunto un connettore e-bus aggiuntivo che permette la connessione a centraline di termoregolazione e termostati Vaillant. Queste caldaie murali sono molto semplici da installare grazie a dimensioni (62,6cm altezza, 40cm di larghezza e 27cm di profondità) e peso ridotto (circa 26 kg): tali caratteristiche la rendono ideale ogni qual volta sia necessaria una sostituzione. Tutti i componenti che sono presenti all’interno del prodotto rispettano le normative ErP di efficienza energetica, linea guida sposata anche da Vaillant, come brand sensibile alle tematiche ambientali.Questo è tutto quello che la nuova ecoTEC intro può offrire, oltre ad un prezzo competitivo che non va ad incidere sulle performance. Prima accensione gratuita Vaillant garantisce, attraverso il lavoro dei suoi tecnici, il servizio di prima accensione gratuita su tutte le caldaie murali condensing. Caldaia murale ecoTEC intro Consumi elettrici in standby minori di 2W Display innovativo touch screen Comfort sanitario anche con basse portate Costi di installazione contenuti Dimensioni ridotte Scambiatore in acciaio inox Sistema combustione pneumatica con premiscelazione completa Attacchi idraulici verticali Modulazione 1:4 Produzione acs istantanea  Vaso espansione 8 litri Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENZIONE ! Per la trasformazione Metano / Gpl /Aria propanata gratuita da richiedere al Centro Assistenza Autorizzato Caratteristiche Tecniche Modello : Enerwa Plus 28 Gas : Metano / Gpl Materiale gruppo idraulico : Ottone Classe : NOx 5 Circuito gas Consumo di gas Metano : 0,397 ~ 3,05 m3/h Consumo di gas Gpl : 0,144 ~ 1,18 m3/h Efficienza : 107,4 ~ 107,5 % Circuito radiatori Carico termico massimo Metano :  28,7 kW Carico termico massimo Gpl :  29,4 kW Potenza termica massima Metano (80/60° C) : 28 kW Potenza termica massima Gpl (80/60° C) : 28 kW Potenza termica massima Metano (50/30° C) : 30 kW Potenza termica massima Gpl (50/30° C) : 28,6 kW Gamma di regolazione termica : 25° ~ 80° C Pressione massima di esercizio : 3 bar Circuito acqua calda sanitaria Potenzialità massima acqua calda sanitaria : 34,9 kW Portata massima acqua calda sanitaria (∆t: 30°C) : 16,8 l/min Portata massima acqua calda sanitaria (∆t: 25°C) : 20,1 l/min Regolazione temperatura A.C.S. : 35° ~ 60° C Circuito elettrico Alimentazione (V,Hz, Ø) : 220~240/50/1 Consumo energetico : 60 ~ 104 W Dimensioni e peso Dimensioni (AxLxP) : 725x420x288 mm Peso : 33,2 Kg Caldaie Warmhaus Enerwa e EnerwaPlus La Nuova Era delle Caldaie Caldaia murale combinata Enerwa ed Enerwa Plus grazie alle sue contenute dimensioni di soli 288mm di profondità ed il loro design moderno sono ideali per l’installazione su balconi o all’interno delle cucine Affidabile ed efficiente Il nuovo sistema auto adattivo della valvola gas elettronica regola in maniera precisa il rapporto di combustione tra aria e gas. Nessun sistema di pre-riscaldamento , la caldaia mantiene l’acqua calda per tutto il tempo di utilizzo. Efficace circolazione Circolatore con convertitore di frequenza , si tratta di una pompa ad alta efficienza con prevalenza di 7 m.c.a. Display LCD intelligente Ampio display LCD , il display mostra la temperatura di riscaldamento, A.C.S. e la pressione interna Espansione impianto Vaso d'espansione da 8 litri. Il nuovo vaso d’espansione è in gradi di fornire 130/140lt d’acqua al sistema Controllo gas adattivo Con il suo segnale può fornire il controllo simultaneo di ionizzazione e valvola gas Altamente economica Si tratta di avere un consumo elettrico ridotto al massimo 82W Acqua calda e flusso continuo Sistema di scambiatore asimmetrico , fornisce un elevato apporto di flusso con i suoi ampi passaggi d’acqua Sensore di pressione per ottimizzare le prestazioni Possibilità di impostare l’altitudine delle caldaie per ottimizzare l’efficienza Silenziosità Grazie al rivestimento interno di 10mm si lavora con la massima silenziosità e con un ottimo isolamento termico Specifiche del processore SMART WARMHAUS Alta efficienza Scambiatore alta efficienza radiale a basso rischio di instasamento ed a prova di perdite. Caratteristiche pannello Pulsanti di selezione per modalità, reset, riscaldamento ed A.C.S. Pulsanti intuitivi per la selezione della temperatura di riscaldamento ed A.C.S. Temperature su schermo LCD Indicatore modulazione di fiamma Manometro digitale di pressione Auto-diagnostica codici ed identificazione di sistema Differenti parametri di lavoro per le caldaie Differenze tra Enerwa e EnerwaPlus Enerwa Estetica Pannello di controllo : 2 Manopole , 2 Pulsanti Display LCD : 30 mm x 44 mm , Schermo LCD blu , retroilluminato Pressostato acqua : EO2 allarme bassa pressione. Pressione dell’acqua visibile sul manometro Circolatore autoregolante EnerwaPlus Estetica Pannello di controllo : 6 Pulsanti Display LCD : 40 mm x 75 mm , Schermo LCD arancio , retroilluminato Pressostato acqua : Sensore pressione acqua. EO2 allarme bassa pressione. E03 allarme alta pressione. Pressione dell’acqua visibile su manometro e su schermo LCD Circolatore con controllo PWM (Pulse-Width-modulation) Modulazione a larghezza di impulso Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENZIONE IL PRODOTTO È NUOVO E CONTROLLATO DAI NOSTRI TECNICI, PRESENTA DIFETTI DA TRASPORTO: AMMACCATURA E BOZZATURE SULLA PARTE ANTERIORE VITI NON DI SERIE AI PANNELLI LATERALI AMMACCATURA E BOZZATURA PANNELLO LATERALE BOZZATURA SULLA PARTE SUPERIORE IMBALLO USURATO (PER MAGGIORI DETTAGLI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE). Caldaia Bosch a condensazione Condens 1200 W 28/30 kW completa di kit scarico fumi cod GC1200W 7716704747 Potenza termica nominale min. (80/60 °C) 6,4 kW Potenza termica nominale massima a carico parziale (80/60 °C) 27,5 kW Potenza termica nominale max. (50/30 °C) 30,1 kW Al 30 % della potenza termica nominale e a un regime a bassa temperatura 9,2 kW Temperatura di mandata max.82°C Volume del vaso di espansione 6 l Carico termico nominale max. riscaldamento 28,2 kW connessione elettrica 230 V Frequenza elettrica 50 Hz Tipo di protezione (EN 60529) IPX4D, B23/B53:IPX0 Consumo max. di energia elettrica 125 W Consumo min. di energia elettrica 12 W Peso netto 24,5 kg Larghezza 395 mm Altezza 665 mm Profondità 285 mm Collegamento per mandata/ritorno riscaldamento 3/4 Zoll Collegamento per mandata e ritornon1/2 Zoll Potenza termica nominale 28 kW Efficienza energetica stagionale del riscaldamento d'ambiente 94 % Efficienza energetica di riscaldamento dell’acqua 84 % Codice prodotto 7716704747 Caldaia a condensazione Condens 1200 Ampia gamma di potenze per rispondere ad ogni esigenza e assicurare un comfort domestico su misura per ogni abitazione Adatta per: appartamenti in condominio, anche con spazi ridotti Ideale per sostituzioni e ristrutturazioni Caldaia murale combinata Potenze disponibili: 24 e 28 kW in riscaldamento, 24 e 30 kW in sanitario Piccola ma performanteGrazie alle dimensioni compatte, Condens 1200 W trova spazio ovunque, anche nei pensili della cucina! Disponibile in tre versioni, si adatta ad ogni esigenza, assicurando anche un risparmio di gas grazie all’elevata efficienza stagionale del 94% e al campo di modulazione 1:5. Semplice da usare Facile da impostare, grazie allo schermo LCD da 2,4’’, la caldaia Condens 1200 W può essere gestita anche da remoto, in collegamento al termostato smart EasyControl CT 200, tramite app HomeCom Easy. Inoltre, migliora l'efficienza e il risparmio attraverso la regolazione climatica integrata (con aggiunta della sonda esterna), che adatta la potenza alle condizioni atmosferiche esterne. Affidabile nel tempoCondens 1200 W è progettata per durare nel tempo, grazie ai materiali di alta qualità e ai rigidi test di produzione. Affidabilità nel tempo assicurata anche dalla rete di assistenza Bosch, capillare ed altamente specializzata. Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto

Read more less

ATTENZIONE IL PRODOTTO È STATO INSTALLATO E L'IMBALLO RISULTA USURATO DA TRASPORTO (PER MAGGIORI DETTAGLI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE).   LA CALDAIA NASCE A METANO. QUINDI, È NECESSARIO RICHIEDERE IL KIT DI TRASFORMAZIONE. PER INFO, CONTATTARE PREVENTIVAMENTE IL CENTRO ASSISTENZA AUTORIZZATO DI ZONA  Caratteristiche tecniche Modello : ecoTEC Intro VMW 24/28 AS/1-1 Codice articolo : 0010026088 Alimentazione : Metano Performance Potenza riscaldamento : 6,9 ~ 23,9 kW Portata termica nominale in sanitario : 6,9 ~ 28,0 kW Classe di efficienza energetica in riscaldamento : A Classe di efficienza energetica in sanitario : A Profilo di carico sanitario : XL Classe NOx : 6 Rendimento al 30% : 108,2% Produzione acqua calda sanitaria (ΔT = 30K) : 13,4 l/min Regolazione temperatura acqua calda sanitaria : 35°C ~ 60°C Modulazione : 1:4 Pressione di precarica vaso d’espansione : 0,75 bar Pressione idrica minima : 0,3 bar Potenza elettrica totale : 90 W Capacità vaso di espansione : 8 litri Dimensioni e peso Dimensioni (AxLxP) : 626x400x270 mm Peso : 25,6 Kg Estensione di garanzia a 7 anni   Caldaia murale a condensazione ecoTEC Intro VMW La più compatta e leggera, oggi anche per esterno Le nuove caldaie a condensazione ecoTEC intro VMW (per il riscaldamento e la produzione di acqua calda sanitaria) sono disponibili nelle potenze da 24 e 28 kW aumentando il ventaglio di scelta di prodotto all’interno della consolidata gamma delle caldaie a condensazione di Vaillant. Questo prodotto dà infatti la possibilità di avvicinarsi al mondo delle caldaie a condensazione offerto da Vaillant anche per i nuovi utenti, senza andare incontro a costi eccessivi per la sostituzione della vecchia caldaia. ecoTEC intro mantiene il focus sul risparmio energetico montando una pompa modulante ad alta efficienza che minimizza i consumi elettrici annuali, con conseguente impatto positivo in bolletta. Anche per quanto riguarda il risparmio di gas Vaillant propone la nuova tecnologia di combustione, denominata fan push, dove è il ventilatore che grazie ai diversi livelli di pressione esercitata sulla valvola gas garantisce il giusto rapporto tra aria comburente e gas. Il case di ecoTEC intro è semplice ed essenziale, le dimensioni risultano essere estremamente ridotte che non vanno però ad inficiare o ridurre la qualità ed efficienza del prodotto, garantito da Vaillant. Il pannello frontale introduce un’innovativa interfaccia touch screen di estrema semplicità con 6 tasti, display a sfondo nero e 2 digit in bianco con accensione ad intermittenza. Nella parte inferiore della caldaia è stato aggiunto un connettore e-bus aggiuntivo che permette la connessione a centraline di termoregolazione e termostati Vaillant. Queste caldaie murali sono molto semplici da installare grazie a dimensioni (62,6cm altezza, 40cm di larghezza e 27cm di profondità) e peso ridotto (circa 26 kg): tali caratteristiche la rendono ideale ogni qual volta sia necessaria una sostituzione. Tutti i componenti che sono presenti all’interno del prodotto rispettano le normative ErP di efficienza energetica, linea guida sposata anche da Vaillant, come brand sensibile alle tematiche ambientali.Questo è tutto quello che la nuova ecoTEC intro può offrire, oltre ad un prezzo competitivo che non va ad incidere sulle performance. Prima accensione gratuita Vaillant garantisce, attraverso il lavoro dei suoi tecnici, il servizio di prima accensione gratuita su tutte le caldaie murali condensing. Caldaia murale ecoTEC intro Consumi elettrici in standby minori di 2W Display innovativo touch screen Comfort sanitario anche con basse portate Costi di installazione contenuti Dimensioni ridotte Scambiatore in acciaio inox Sistema combustione pneumatica con premiscelazione completa Attacchi idraulici verticali Modulazione 1:4 Produzione acs istantanea  Vaso espansione 8 litri Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Overview BIASI PARVA RECUPERA E 28S LPG CONDENSING BOILER - NEW ErP 2015, SEALED CHAMBER COMPLETE WITH FUME EXHAUST KIT: PARVA Recupera E the ErP condensing boiler with heat recovery unit Technical specifications Model:ÿPARVA Recover E 28S Product number:ÿ10313.2027.3 Energy label specifications according to the European ErPÿ directive Class B heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Thermal input:ÿ29ÿkW Rated useful power: 28.4 kW Nominal load efficiency:ÿ98% Efficiency minimum load:ÿ95.8% Energy efficiency stars: (dir 92/42/CEE) **** Min/max heating temperature: 38/85ÿøC Capacity of the expansion vessel: 6 lt Sanitary flow rate t =25øK l/min: 16.3 l/min Degrees of protection for the electrical system:ÿIPX4D Extremely compact dimensions hxwxd: mmÿ803x400x350ÿ; 49kg LPG fuel supply Features list ErP wall-mounted boilers with recuperator Redeveloping an old thermal systemÿ Biasi has designed the ÿPARVA Recupera NOx EÿandÿPARVA Recupera Eÿboilers to replace traditional boilers in old systems. The PARVA Recupera boilers by Biasi are equipped with a corrosion-resistant aluminum alloy fume recovery unit which makes these boilers particularly solid. The recovery unit is made of aluminium, has a finned coil which determines a large exchange surface and is equipped with a device to ensure that the boiler discharges the condensate correctly. The recuperator is treated with a Teflon coating process to ensure maximum durability over time. Thanks to the large exchange surface, the recuperator allows the recovery of thermal energy which would otherwise be dispersed outside through the hot fumes produced by combustion. PARVA Recover E PARVA Recupera E is the condensing boiler designed for traditional systems and easily adaptable to new floor-based systems using MULTIZONE, a hot water distribution system for heating. PARVA It recovers the traditional boiler in the regulations but it has clearly higher efficiency than the traditional boilers at the same operating temperature. As a condensing boiler, PARVA Recupera allows you to take advantage of the tax deduction according to current legislation. Characteristics: High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06ÿ Primary laminated copper heat exchanger with large double circulation exchange surfaceÿ Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the waterÿ Sanitary plate heat exchanger in INOXÿ steel High efficiency pump with low energy consumptionÿ retractable control panel, with ergonomic knobs and backlit displayÿ Electronic board for:ÿ - Re-ignition frequency adjustmentÿ - Adjustable primary circuit thermal inertia disposalsÿ - Selection of circulator modeÿ - Circulator anti-seizeÿ - Antifreeze safetyÿ - Chimney sweep functionÿ Integrated automatic by-passÿ Immunity to radio interferenceÿ Sanitary flowstat magneticÿ Absolute heating pressure switchÿ Degrees of protection IPX4Dÿ Possibility of integrating PARVA Recupera E with Biasi solar systems using the optional solar kit. Fiscal detraction As a condensing boiler, PARVA Recupera E allows you to take advantage of the tax deduction according to current legislation.ÿÿ Heat recoveryÿ The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator made of aluminum has a finned coil which determines a large exchange surface and has a device to ensure that the boiler discharges the condensate correctly.ÿÿ Thermoregulation By connecting the external probe (optional) directly to the boiler, you can access the climatic adjustment function. The boiler is equipped with a complete set of curves which can be accessed by entering programming. By simply turning a knob you choose the curve, PARVA recovers and will automatically adapt its operation to the external climatic conditions.ÿÿ High circulation primary heat exchangerÿ It is the element that distinguishes the whole PARVA E Biasi range. It favors the flow of water into the heating system and, thanks to its reduced hydraulic resistance, adapts the boiler to the system, facilitating the transmission of heat to the radiators.ÿ Save simplicity of use Parva Recupera retains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler resulting from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at operating temperatures typical of radiator systems, leads Parva Recupera to have higher yields than traditional boilers. Low complexity, high comfort Parva Recupera boilers, despite the high technical content, are still very easy to use. Theÿcontrol panelÿhas two knobs dedicated to regulating the temperature of the domestic hot water and the heating water, the key to reset the boiler after the lockout status, the new display to view the boiler operating status and facilitate understanding by the User and the installer's settings . Fault diagnostics allow immediate verification of correct operation. The manometer allows you to check the system pressure while the temperature is shown on the display. Everything is hidden under a door that defines the sober and linear aesthetics of Parva Recupera. Included in delivery Boiler support bracket and paper templateÿ Condensate collection trapÿ Quick instruction to the user.ÿ All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. It's about me too YES, it affects everyone: professionals and end users The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier's liability The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. Responsibilities of Resellersÿ First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview BIASI RECOVERY BOILER DGT 28S CONDENSING LPG LPG - NEW ErPÿ Technical specifications Model: Retrieve DGT 28S Energy label specifications according to the European ErPÿ directive Class B heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Heating/sanitary nominal heat inputkW 29.0 Maximum useful heating/sanitary powerkW 28.3 Energy efficiencynø NOx class no. 2 Minimum / maximum heating temperature**øC 40 / 85 Capacity of expansion vessel (total / useful) l 8.0 / 4.0 Maximum flow rate (T=25 K) / (T=35 K) l/minÿ16.3 / 11.6 Degrees of protection nø IPX4D Height x Width x Depth mm 803x400x350 LPG or LPG fuel supply Main features RECOVER DGTÿ ÿWall mounted condensing boilersÿ Retrieve DGTÿ theÿcondensing boilerÿdesigned for traditional systems and easily adaptable to new floor-based systems using Multizone, hot water distribution devices for heating. Recupera DGT retains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler resulting from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at typical operating temperatures of radiator systems, leads Recupera DGT to have higher yields than traditional boilers. Characteristics: High efficiency ( ( compliant with 92/42 EEC directive and Legislative Decree 311/06,¶½ Primary laminated copper heat exchanger with large exchange surface, double circulation Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the water Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption digital control panel with backlit display Electronic board for:ÿ Restart frequency adjustmentÿ Adjustable primary circuit thermal inertia disposalsÿ Circulator mode selectionÿ Circulator anti-seizeÿ Frost safetyÿ Chimney sweep function Integrated automatic by-pass Immunity to radio interference Magnetic sanitary flow Absolute heating pressure switch Degrees of protection IPX4D Heat recovery The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator made of aluminum has a finned coil which determines a large exchange surface and has a device to ensure that the boiler discharges the condensate correctly. Four-controllers Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Fault diagnostics display, fault history block status View recommended fill Display annual periodic maintenance expiry All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres or As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. It's about me tooÿ YES, it affects everyone: professionals and end users The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier's responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. Responsibilities of Resellersÿ First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview BIASI RECOVERY BOILER DGT 28S CONDENSING METHANE LPG - NEW ErPÿ Technical specifications Model: Retrieve DGT 28S Energy label specifications according to the European ErPÿ directive Class B heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Heating/sanitary nominal heat inputkW 29.0 Maximum useful heating/sanitary powerkW 28.3 Energy efficiencynø NOx class no. 2 Minimum / maximum heating temperature**øC 40 / 85 Capacity of expansion vessel (total / useful) l 8.0 / 4.0 Maximum flow rate (T=25 K) / (T=35 K) l/minÿ16.3 / 11.6 Degrees of protection nø IPX4D Height x Width x Depth mm 803x400x350 ÿMETHANEÿorÿLPG power supply Main features RECOVER DGTÿ ÿWall mounted condensing boilersÿ Retrieve DGTÿ theÿcondensing boilerÿdesigned for traditional systems and easily adaptable to new floor-based systems using Multizone, hot water distribution devices for heating. Recupera DGT retains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler resulting from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at typical operating temperatures of radiator systems, leads Recupera DGT to have higher yields than traditional boilers. Characteristics: High efficiency ( ( compliant with 92/42 EEC directive and Legislative Decree 311/06,¶½ Primary laminated copper heat exchanger with large exchange surface, double circulation Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the water Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption digital control panel with backlit display Electronic board for:ÿ Restart frequency adjustmentÿ Adjustable primary circuit thermal inertia disposalsÿ Circulator mode selectionÿ Circulator anti-seizeÿ Frost safetyÿ Chimney sweep function Integrated automatic by-pass Immunity to radio interference Magnetic sanitary flow Absolute heating pressure switch Degrees of protection IPX4D Heat recovery The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator made of aluminum has a finned coil which determines a large exchange surface and has a device to ensure that the boiler discharges the condensate correctly. Four-controllers Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Fault diagnostics display, fault history block status View recommended fill Display annual periodic maintenance expiry All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres or As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. It's about me tooÿ YES, it affects everyone: professionals and end users The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier's responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. Responsibilities of Resellersÿ First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less