ATTENTION Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance Ferroli BLUEHELIX PRO RRT 28 C methane or LPG condensing boiler Complete with Lox NOx Fume Exhaust Kit - NEW Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Thermal power 80°C-60°C Max Heating: 24.0 / 4.9 kW Thermal power 50°C-30°C Max Sanitary: 26.0 / 5.4 kw Useful thermal efficiency 30%: 109.7 Max working pressure heating bar 3 NOx class 6 Sanitary flow rate ∆t 25°C 15.8 Protection degree (IEC 60529) IP X5D Supply voltage V/Hz 230V / 50Hz Dimensions HxWxD mm 700x420x250 BLUEHELIX PRO RRT The quality of the BLUEHELIX line is unquestionable, and Ferroli is ready to put it to the test by offering its customers extended warranty coverage which also ensures periodic maintenance and statutory checks > STRONG POINTS: - With attention to aesthetics and silence, it continues the tradition of appreciation of the previous "Bluehelix Pro" series - DUAL STAINLESS STEEL exchanger : boiler with primary exchanger for heating and domestic hot water in very thick stainless steel integrated in a single component (DUAL). High efficiency even during DHW operation (94%). - Increased hydraulic passages of the exchanger both on the heating circuit and on the DHW circuit. - : in combination with the modulating remote control and the external probe (optional) it reaches the upper efficiency class A+ (scale from G to A+++) - MC2 : Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) - MGR: Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits - Exclusive exchanger-burner system with self-cooled door: simplifies maintenance and reduces its cost thanks to fewer parts to replace - Hydraulic connections covered by the boiler casing - Large backlit multifunction graphic display for easy and correct setting of the parameters - Standard by-pass > BENEFITS OF bluehelix PRO RRT C: - Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes - FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard - Designed to simplify and facilitate normal maintenance and cleaning operations - Predisposition for solar systems: prearranged for the production of domestic hot water combined with solar panel systems - STOP AND GO: it is possible to delay the ignition of the burner by activating it only in the face of real withdrawals of domestic hot water - 3-star certified comfort in sanitary manufacturing according to EN 13203 - Minimum polluting emissions (class 6 according to EN 15502-1) - Sliding temperature operation via optional external probe - Low consumption modulating heating pump (ErP Ready - Class A) - Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (methane model) - Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit - Free methane/LPG/propaneted air transformation when checking the product and activating the warranty, to be requested from the Authorized Assistance Center Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Hermann Saunier Duval condensing boiler SEMIATEK CONDENS 28-AS/1 28 kW Methane Complete with Smoke Kit - New Select the smoke kit in the drop-down menu! Technical features Model : Semiatek Condens Power : 28 kW Methane gas Heating efficiency class: A Sanitary efficiency class: A Sanitary load profile XL Fireplace flow rate Qmin/max - 75/55°C : 7.2 - 24.5 kW Rated power Pmin/max - 75/55°C : 6.9 - 23.9 kW Rated power Pmin/max - 50/30°C : 7.7 - 25.9 kW Efficiency Pmax - 80/60°C - 50/30°C : 97.6 / 105.9 % Efficiency P30% - 40/30°C : -/-/108,1 % Min/max flow temp. : 30 - 75 Min/max boiler operating pressure: 0.3/3 bar Heating expansion vessel - Capacity/pre-charge : 8/0.75 l/bar Domestic hot water production type: Instantaneous ACS quality classification (EN 13203-1) : Capacity at the hearth min/max - 60°C : 8.0 - 31.1 kW Rated power min/max - 60°C : 7.2 - 28.0 kW Continuous flow rate (∆T= 25K) : 16.1 l/min Specific flow rate (∆T = 30K) (EN13203) : 13.4 l/min Peak flow rate in 10 minutes (∆T = 30K) : 134 l/10 min Min/max DHW temperature : 35 - 55 °C Gas category : II 2H 3P Absorption - Peak/Pmax/Pmin/Stand-by : - / 90 / - / 1,7 W Weight : 26.5Kg Semiatek Condens 28 kw The optimal solution for heating and domestic hot water preparation. Excellent value for money, both for new builds and replacements It can be retrofitted into existing heating and hot water supply systems Heat exchanger in stainless steel 3 year guarantee The SemiaTek Condens boiler is available in 24 and 28 kW methane power. The most important novelty concerns the renewed primary exchanger , the old one in Al-Si has been replaced by the one in stainless steel which, through a simple adjustment of the gas valve, also allows operation with propane. Innovation also from the point of view of combustion : complete premixing with new fan-push technology where the fan in the new position upstream of the burner guarantees the right ratio between air and gas by applying a proportional pressure value which guarantees the opening of the gas valve without waste. The project has been developed to offer the optimal solution in terms of price , performance and quality . SemiaTek Condens also features a new design of the ultra-compact hydraulic block with new location of the key components, while still maintaining a good level of efficiency, performance and adequate comfort in both heating and domestic hot water production. Characteristics The new design of SemiaTek Condens offers an innovative touch screen interface of extreme simplicity with 6 keys, display with black background and 2 white digits with intermittent ignition, the indication of the boiler status is defined by the intermittent ignition of the icon selected. SemiaTek Condens is compatible with all Hermann Saunier Duval components and accessories already on the market. SemiaTek Condens can also be combined with the MiGo WiFi control unit. The wall-mounted boiler is ready to be managed remotely simply with a smartphone. Ease of installation SemiaTek Condens is very simple to install thanks to its small size - 62.6cm high, 40cm wide and 27cm deep - and low weight. Even the vertical hydraulic connections have been designed to facilitate and speed up installation. For these reasons, it is the ideal solution for replacing old systems. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

ATTENZIONE IL PRODOTTO È NUOVO E CONTROLLATO DAI NOSTRI TECNICI, PRESENTA DIFETTI DA TRASPORTO: LEGGERA AMMACCATURA AL PANNELLO ANTERIORE IMBALLO USURATO (PER MAGGIORI DETTAGLI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE). Caldaia Baxi Duo-Tec Compact E 28 kW a condensazione low NOx completa di kit scarico fumi Metano o Gpl. Caratteristiche Tecniche Classe di efficienza energetica ErP (risc e ACS): A  Profilo di carico: XL Portata termica nominale sanitario kW 28,9 Portata termica nominale riscaldamento kW 24,7 Efficienza energetica stagionale del riscaldamento d'ambiente ŋs % 93 Emissioni di ossidi di azoto NOx mg/kWh 17 Temperatura minima di funzionamento °C -5 Capacità vaso espansione l 7 Regolazione temperatura acqua circuito riscaldamento °C 25-80 Produzione acqua sanitaria ∆T 25°C (1) l/min 16,1 Portata minima acqua circuito sanitario l/min 2 Capacità vaso espansione l 7 Dimensioni (hxlxp) mm 700x400x299 Grado di protezione IPX5D NB: FUNZIONAMENTO A GPL TRAMITE REGOLAZIONE DEL CENTRO ASSISTENZA AUTORIZZATO Gamma DUO-TEC COMPACT E  Nuovo design: cambia l’estetica, non le prestazioni. Luna Duo-tec E e Duo-tec Compact E: le già note caldaie Baxi si presentano oggi con una nuova estetica, sempre più moderna ed attenta alle nuove tendenze di design, che ne consente l’inserimento in qualsiasi contesto abitativo. Anche il pannello comandi è stato completamente rinnovato ed è dotato di un nuovo display LCD retroilluminato ancora più chiaro e semplice da usare grazie a tasti dedicati ed indipendenti. Le nuove caldaie, ancora più belle e moderne grazie al restyling, mantengono comunque intatte le caratteristiche che da sempre hanno contraddistinto la gamma Duo-tec: Affidabilità. Robustezza, durabilità e affidabilità nelle prestazioni; Efficienza e risparmio. La riduzione dei cicli di accensione/spegnimento si traduce in notevoli benefici in termini di risparmio energetico e minori emissioni; Completezza di gamma. Modelli solo riscaldamento, con produzione istantanea ACS, e anche la versione compatta con possibilità di installazione all’esterno. La gamma si è ulteriormente arricchita con i nuovi modelli dotati DI SERIE del cronotermostato modulante con wi-fi integrato Baxi Mago (duo tec mago) La caldaia ideale per nuove costruzioni e per la sostituzione La gamma di caldaie a gas a condensazione Duo-tec E è stata specificatamente progettata rispettando i requisiti delle Direttive Ecodesign e Labelling, per renderla particolarmente adatta sia in caso di nuove costruzioni sia in sostituzione di un vecchio generatore. La classe energetica, identificata da una lettera, esprime un intervallo di valori di efficienza entro il quale risiede quello espresso dal prodotto in esame. L’etichetta nasce per il consumatore finale, in modo che, attraverso dati veri e comparabili, possa fare scelte consapevoli indirizzandosi su prodotti ad alta efficienza. Funzione preriscaldo scambiatore Le caldaie della gamma Duo-tec E sono dotate della funzione di preriscaldo dello scambiatore che garantisce la produzione immediata di acqua calda sanitaria alla temperatura comfort impostata. Infatti, l’acqua sanitaria passando attraverso le piastre dello scambiatore preriscaldato, viene erogata già alla temperatura desiderata senza tempi di attesa. La funzione può essere facilmente attivata/disattivata da un apposito parametro della caldaia Info caldaia Premendo il tasto dedicato , è possibile visualizzare numerose informazioni in merito al funzionamento della caldaia come ad esempio: pressione acqua impianto riscaldamento (trasduttore di pressione elettronico presente nel gruppo idraulico); temperatura di mandata/ritorno riscaldamento; temperatura esterna (con sonda esterna installata); temperatura acqua calda sanitaria. Efficienza e risparmio maggiore efficienza data da minori accensioni e spegnimenti: con un rapporto di modulazione elevato, la riduzione dei continui cicli di accensione/spegnimento comporta una significativa riduzione dei consumi (dell’8-10%) e una pari riduzione delle emissioni inquinanti; adeguamento della potenza termica prodotta alla potenza dissipata evitando quindi un eccessivo surriscaldamento/raffrescamento dei locali. Gas Adaptive Control È un innovativo sistema che, grazie ad una nuova elettronica di controllo e ad una nuova valvola a gas elettronica, garantisce un controllo automatico della combustione per mantenere costantemente i valori di massima efficienza. Vantaggi: non ci sono interventi manuali - ridotte misurazioni, tarature o cambio ugelli con questo sistema, la caldaia si auto adatta alla qualità del gas e alla lunghezza dei tubi di scarico fumi mantenendo costante il rendimento la caldaia inoltre si autoregola costantemente per mantenere i valori di massima efficienza favorendo una riduzione dei consumi di gas e generando meno inquinamento grazie al continuo controllo delle emissioni Installazione all’esterno Le caldaie Duo-tec Compact E possono essere installate all’esterno in luoghi parzialmente protetti grazie al nuovo kit di copertura superiore e al kit di chiusura inferiore (disponibili come accessori). La gamma Duo-tec Compact E, infatti, è dotata DI SERIE di un sistema antigelo elettronico che garantisce il funzionamento fino alla temperatura di -5 °C: la protezione IPX5D, inoltre, tutela le parti elettriche da getti d’acqua che possono provenire da tutte le direzioni. Nuovo design moderno ed elegante per tutta la gamma Ampio campo di modulazione 1:7 maggiore efficienza e silenziosità GAC (gas adaptive control): controllo automatico della combustione Pannello comandi digitale con ampio display LCD retroilluminato Nuovo kit di copertura: possibilità di installazione all’esterno in luoghi parzialmente protetti (accessorio a richiesta) Allacciamento tubo di scarico Ø50 mm rigido e flessibile: soluzione per risanamento canne fumarie - per il mod. 24 kW lunghezza totale 40 metri (aspirazione+scarico) Dimensioni compatte: 700x400x299 mm Sistema idraulico Valvola deviatrice a tre vie elettrica Bruciatore a premiscelazione in acciaio inox Scambiatore acqua/fumi in acciaio inox Scambiatore sanitario maggiorato in acciaio inox che permette alla caldaia di condensare anche in funzionamento sanitario Ventilatore modulante a variazione elettronica di velocità By-pass automatico Pompa di circolazione ad alta efficienza a modulazione totale Sistema antibloccaggio pompa e valvola a tre vie che interviene ogni 24 ore Valvola di sicurezza circuito riscaldamento a 3 bar Sistema di termoregolazione Regolazione climatica di serie (con sonda esterna disponibile come optional) Predisposizione per il collegamento ad un impianto a zone Sistema di controllo Termostato di sicurezza contro le sovratemperature dello scambiatore acqua/fumi Pressostato idraulico che blocca il gas in caso di mancanza d’acqua Sonda NTC di sicurezza contro le sovratemperature dei fumi Controllo temperature mediante sonde NTC Dispositivo antigelo totale Termometro elettronico Manometro circuito riscaldamento Garanzia Prodotto :  Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

FONDITAL FORMENTERA CTN 28 METHANE OPEN CHAMBER GAS BOILER Characteristics of heating/DHW operation: Open chamber with natural draft Nominal heat output: 28 kW Efficiency at maximum power: 90.0% Efficiency at 30% load: 87.8% Classification according to 92/42/EEC: ** NOx class (EN 297/EN 483); 2 Min-max sanitary pressure: 0.5 - 6 bar Heating temperature adjustment °C 35-78 Expansion vessel capacity: 7 l DHW production ∆t 30°C: 13.5 l/min Total absorbed electric power: 56 W Degree of protection of the electrical panel: IPX5D Dimensions (hxlxp) 420x750x315 mm; 36kg METHANE power supply Warranty: 2 years FORMENTERA CTN Formentera CTN is a wall-hung instantaneous combined gas boiler with open chamber and natural draft. The gas boiler is equipped with a touch screen user interface and is set up to be powered by methane or LPG. Pluses: Touch screen user interface Boiler room temperature adjustment with external probe Sanitary heat exchanger with 26 plates Standard management of three types of solar thermal system Boiler change kit Characteristics: High efficiency circulator with built-in deaerator Standard management of 3 types of solar thermal system Monothermal primary heat exchanger Sanitary heat exchanger with 26 stainless steel plates Integrated hydraulic unit including automatic by-pass, safety valve, pressure transducer, drain cock and connection to the expansion tank Integrated electronic board for safety and flame modulation Sliding temperature operation with external probe (optional) Management of high and low temperature heating zones, via electronic board (optional) Efficiency classification according to 92/42/EEC: ★★ Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Junkers Bosch CERAPUR SMART 28-3 CE condensing boiler complete with low NOx methane fume exhaust kit - NEW Heating energy class A Sanitary energy class A XL load profile Maximum nominal thermal power 21.8 kW Max DHW nominal heat input 27.4 kW Seasonal space heating energy efficiency 93% NOx class 6 Dimensions WxLxH 350x400x850 CERAPUR SMART Cerapursmart condensing boiler : compact comfort, excellent performance Ideal for replacing the old boiler due to the simplicity of installation Robust and reliable boiler Possibility of remote connection of the boiler The boiler can be installed in any context Advantages Ideal for replacement Ideal for replacing old boilers thanks to the distance of the water connections from the wall equal to 18 cm. This allows for extremely easy installation Robustness and reliability This condensing boiler offers strong robustness and great reliability thanks to the primary exchanger in Al-Si WB6 aluminum alloy Remotely controllable Boiler connectivity possible via the EasyControl CT 200 intelligent thermostat or via the MB LAN2 module (accessory) which can be combined with CR…, CW…(1) thermoregulators Suitable for any context Simple installation of the boiler in any context thanks to the C6 approval which allows the use of any intake/exhaust system

Read more less

Caratteristiche tecniche Modello : InoxDens 28S Codice prodotto : 10313.1010.0 Alimentazione : Metano Efficienza energetica Classe di efficienza energetica riscaldamento : A Classe di efficienza energetica sanitario : A Profilo di prelievo : XL Performance Portata termica nominale riscaldamento : 25,0 kW Portata termica nominale sanitario : 29,0 kW Potenza utile massima riscaldamento 60°/80°C : 24,5 kW Potenza utile massima sanitario 60°/80°C : 28,4 kW Potenza utile massima riscaldamento 30°/50°C : 26,9 kW Potenza utile massima sanitario 30°/50°C : 31,1 kW Rendimento nominale 60°/80°C : 98,0% Rendimento nominale 30°/50°C : 107,4% Classe NOx : 6 NOx ponderato : 28 mg/kWh Temperatura minima e massima riscaldamento : 25° ~ 85°C Pressione minima e massima riscaldamento : 0,3 ~ 3 bar Capacità del vaso espansione : 7,0 litri Temperatura minima e massima sanitario : 30° ~ 60°C Portata massima (ΔT=25 K) : 16,5 l/min Portata massima (ΔT=35 K) : 11,5 l/min Portata sanitari specifica (ΔT=30 K) : 13,8 l/min Alimentazione (V,Hz, Ø) : 220~240/50/1 Grado di protezione : IPX5D Dimensioni e peso Dimensioni (AxLxP) 700x400x300 mm Peso : 31,3 Kg Caldaia a condensazione premiscelata Savio InoxDens S InoxDens completa la gamma SAVIO a condensazione premiscelata: perfetta per impianti a radiatori e idonea con sistemi radianti con gruppi di miscelazione. InoxDens è la caldaia a condensazione compatta che assicura alti rendimenti, bassi consumi e rispetto per l’ambiente. Disponibile per riscaldamento e produzione di acqua calda sanitaria, nelle potenze 24, 28 e 32 kW. Scambiatore primario condensante in acciaio INOX con rivestimento in acciaio per offrire la massima resistenza alla corrosione Bruciatore a premiscelazione totale, acciaio INOX (Classe NOx 6) Modulazione 1:5 Metano e anche GPL Scambiatore sanitario a piastre in acciaio INOX Vaso di espansione da 7 litri Pompa ad alta efficienza con basso consumo energetico Integrazione a sistemi solari Savio, mediante kit solare Lettura digitale nel display della pressione Predisposizione per comando remoto e sonda esterna Gruppo idraulico compatto in ottone. Gruppo di mandata con deviatrice motorizzata, by-pass e rubinetto di carico impianto integrati.Circolatore ERP con sblocco pompa manuale su gruppo di ritorno. Funzionalità del pannello comandi Selettore estate/inverno/off Regolatore temperatura riscaldamento Regolatore temperatura sanitario Lettura digitale della pressione Visualizzazione temperatura sanitaria e riscaldamento da display Visualizzazione diagnostica guasti, stato di blocco e storico guasti Il display opera secondo le modalità: Informazioni disponibili sullo stato di funzionamento e storico errori Parametri programmabili per adeguamento generatore/impianto e SET Utente Parametri generatore Parametri Centri Assistenza Autorizzati Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL Nominal heat output: 28 kW Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.7% Efficiency at 100% Pn (50-30°C): 105.8% Sanitary water production ΔT 25°C: 16.1 l/min Degree of protection: IPX5D Dimensions (hxwxd): 700 x 400 x 299 mm ; 34 kgs Power supply: CNG or LPG * Operation with LPG through adjustment by the Authorized Service Centre Duo-tec Compact+ Wall mounted gas condensing boilers ideal for both new build and replacement Digital control panel The Duo-tec+ range of boilers is equipped with a new digital control panel with an even more backlit LCD display, clearer and simpler to use thanks to dedicated and independent keys for regulating the temperature of the domestic hot water and of the heating. The display allows you to view all the information and set the operating parameters in an intuitive and immediate way. Efficiency and savings Wide modulation range: greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of the continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adaptation of the thermal power produced to the power dissipated thus avoiding excessive overheating / cooling of the premises GAC Gas Adaptive Control It is an innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic control of combustion to constantly maintain maximum efficiency values. Advantages: there are no manual interventions – reduced measurements, calibrations with this system, the boiler self-adapts to the quality of the gas (methane) and to the length of the flue gas pipes, keeping the efficiency constant the boiler also constantly self-regulates to maintain the maximum efficiency values ​​favoring a reduction of gas consumption and generating less pollution thanks to the continuous control of emissions. Fully modulating pump with de-aeration The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ∆T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs. During the first ignition phase, we recommend activating the automatic de-aeration function. This function eliminates the presence of air in the heating circuit and therefore avoids any blockages of the boiler, overheating of the system, etc. Guidelines in case of replacement of a conventional boiler with a new condensing one There are two main problems that can be encountered: Flues and smoke exhaust duct Condensate drain To overcome the above, Baxi recommends: the use of a Ø50 mm exhaust pipe Baxi has in fact developed a system that allows easy ducting in existing flues (for 24kW models). For condensing boilers, the novelty is brought about by the low temperatures of the fumes which allow the use of specific plastic materials; however, in the presence of existing 316 stainless steel flues, installed correctly and with gaskets suitable for receiving damp fumes, there are no problems and they can easily be reconnected to the new boilers while it is absolutely not compliant with the use of aluminum flues or smoke pipes . In fact, aluminum is a metal that is not resistant to the acid condensates present in the fumes. (*) Each Ø50 mm diameter bend decreases the length of the drain by 4m the use of the condensate drain pump Baxi has designed this kit to collect the condensate produced by condensing boilers for domestic use: the pump allows the creation of condensate drainage systems in the absence of natural drainage near the boiler. The operation of condensing boilers determines the formation of condensate, due to the principle of condensation. This water therefore needs to be disposed of through special drains. If there is no adequate slope and therefore it is not possible to dispose of the condensate by gravity, it is necessary to install a pump that conveys it towards the drains. The pumps used are also equipped with special non-return valves to avoid bacterial contamination due to any stagnation and return of the waste water. The use of buildings avoiding the use of annoying pipes. Condensing Boilers The ranges of Duo-tec+ condensing boilers are characterized by very high modulation, the GAC system and remote capability. Very high modulation The wide modulation range up to 1:10 allows a reduction of the switching on/off of the boiler, resulting in an improvement in efficiency and consequently a considerable saving. GAC system The GAC (Gas Adaptive Control) system continuously measures the flame signal during boiler operation and adjusts the gas flow rate in order to keep the combustion quality constant. The resulting advantages are: reduction of installation times/ there are no manual adjustments to make/ reduction of gas consumption and lower environmental impact. Remote control For optimal comfort management, the Duo-tec+ offer a wide range of modulating units. In Platinum+ the extractable control panel and room thermostat are supplied STANDARD with the boiler. Available as optionals are the modulating chronothermostat and the LED interfaces that allow the units to be remotely remoted via wire or wireless. Also for the Duo-tec models, the offer of thermoregulation accessories includes both the remote control and climatic regulator and the wired or wireless modulating chronothermostat, in addition to the wired or wireless modulating thermostat. All boilers are provided with an antifreeze function and IPX5D degree of protection. Duo-tec Compact+ wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control high-efficiency circulation pump with total modulation digital control panel with large backlit LCD display predisposition for combination with the Baxi integrated solar system Ø50 mm exhaust pipe: solution for restoring flues - mod 24 kW ultra-compact dimensions: 700x400x299 mm antifreeze function and IPX5D degree of protection Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BAXI LUNA DUO-TEC+ 28 GA METHANE CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Load profile: XL DHW nominal heat input kW 28.9 Heating nominal heat input kW 24.7 Sanitary nominal thermal power kW 28 Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.6% Efficiency at 100% Pn (50-30°C): 105.8% Expansion/pre-charge vessel capacity l/bar 8/0.8 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 16.1 Degree of protection: IPX5D NOx class (EN 483) 5 Dimensions (h x w x d): 763 x 450 x 345 mm ; 38.5 kgs Power supply: METHANE Luna Duo-Tec+ Wall mounted gas condensing boilers ideal for both new build and replacement The new Duo-tec+ range of gas-fired condensing boilers has been specifically designed in compliance with the requirements of the Ecodesign and Labeling Directives, to make it particularly suitable both for new buildings and for replacing an old generator. In fact, in addition to the already known advantages of condensing technology such as high efficiency, energy saving and reduced polluting emissions, the new Duo-tec+ condensing boilers are characterized by: Complete range of models : heating only, with instantaneous DHW production, with integrated micro-storage tank, with integrated 40-litre storage tank. The range also includes the compact version (Compact+), the first Baxi condensing boiler in just 70 cm in height and 30 cm in depth. Digital control panel with backlit LCD display Wide modulation range 1:7 the reduction of on/off cycles translates into significant benefits in terms of energy savings and lower emissions Digital control panel The Duo-tec+ range of boilers is equipped with a digital control panel with backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and the heating. The display allows you to view all the information and set the operating parameters in a clear and immediate way. Wide modulation range 1:7 greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of the continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises Gas Adaptive Control The innovative GAC ( Gas Adaptive Control ) automatic combustion control system guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the actual power dissipated from the building avoiding excessive heating/cooling of the building. Total modulation pump The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ∆T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs Characteristics: Wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control High efficiency circulation pump with total modulation Digital control panel with large backlit LCD display Arrangement for combination with the Baxi integrated solar system Ø50 mm exhaust pipe: solution for restoring flues - mod. 24 kW Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IMMERGAS VICTRIX TERA 28 kW CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Product code: 3.027369 Energy label specifications according to the European ErP directive Heating energy efficiency Class Sanitary Energy Efficiency Class Withdrawal profile: XL Characteristics of heating/DHW operation: Maximum nominal heat input in DHW kW 32.6 Maximum nominal heat input in heating kW 28.6 Useful thermal efficiency at 30% of the nominal load. (80 / 60 °C) % 97.9 Specific flow rate in continuous domestic hot water service (∆t 30 °C) l/min 15.3 Nominal heating expansion vessel capacity (total) liters 10 (6.4) Electrical protection degree IP X5D Boiler weight full of water (empty) kg 37.9 (35.5) VICTRIX TERA Everything you need, immediately and in a small space It is the new line that strengthens the Immergas range with boilers dedicated to those looking for quality and simplicity. All the appliances are condensing and above all with total premixing to save gas efficiently. The dimensions are compact and the easy placement allows flexibility to adapt to new installations or to replace existing appliances in the home, outdoors in protected places, recessed with OMNI CONTAINER. There are two instantaneous versions - 24 and 28 kW - and one for heating only of 24 kW which can be combined with boilers of various capacities. The whole range that you find on CaldaieMurali.it is equipped with a condensing module with stainless steel coil and designed to comply with the new European Directives on the use of energy. VICTRIX TERA boilers fall into class 6, the most ecological in the European classification, for low emissions of carbon monoxide (CO) and nitrogen oxides (NOx). All versions can discharge the fumes on the wall in the cases envisaged by DL 102 of 4 July 2014. The controls are simple, the LCD display is clear and the selection buttons for adjustments and settings are activated quickly. Features and strengths: Low consumption: the low consumption circulator allows for considerable savings in electricity. Standard: the cover of the water connections improves the aesthetics in domestic environments. Comfort Ease of use: practical buttons and a backlit display allow you to easily manage and view the boiler setting. DOMINUS App: simple and intuitive, it allows you to check the functioning and temperature of the boiler, turn it on and off from anywhere via smartphone or tablet. Options. Environmental compatibility Eco-friendly technology: complies with the European ErP and ELD Directives, allows you to achieve high energy efficiency classes in heating and hot water production. Ecological class 6 (European Standards UNI 297 and 483): the best for reduced emissions of nitrogen oxides (NOX). Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

AVAILABLE TO ORDER ATTENTION: THE PRODUCT WILL BE SUPPLIED WITHOUT THE SPECIFIC SMOKE KIT! Technical Features Model : Victrix 28 KW TT Boiler Code: 3.025511 Template Code: 2.015543 Type: Snapshot Useful Heating Power: 24 kW Useful Sanitary Power: 28 kW Modulation Range: 11 - 100% Hot water production (∆t 30 °C): 13.4 l/min Dimensions (H x W x D): 748 x 440 x 255 mm Weight: 32.0 Kg VICTRIX 28 KW TT Maximum energy savings, maximum flexibility With VICTRIX 28 kW TT Immergas takes the installation flexibility of condensing boilers even further and offers a wide variety of solutions thanks also to the extreme compactness of its dimensions , just 25 centimetres deep. All boilers can be installed: Inside ; Built-in with OMNI CONTAINER but also in SOLAR CONTAINER or DOMUS CONTAINER to add products that use solar thermal energy and heat pumps to the boiler in the GAUDIUM SOLAR V2 or TRIO V2 applications; Outdoors in partially protected places ; And today also in the open air with the dedicated coverage kit. This increases the possibility of creating systems that comply with the new European Directives, which are increasingly oriented towards condensing technology to reduce pollution and increase energy savings. The eco-friendly VICTRIX kW TT condensing range expresses the best of Immergas technology, offering great performance thanks to the innovations introduced in the product design. Two instantaneous versions of 28 and 35 kW are available, and three heating-only versions (12, 24 and 32 kW PLUS) that can be combined with domestic hot water boiler units of various capacities. HIGH HYDRAULIC PERFORMANCE Primary condensation exchanger, made of an Aluminum-Silicon-Magnesium alloy, particularly resistant to corrosion. Designed to have high flow rate and head performance even on old heating systems thanks to the large water passages. This also means a low risk of clogging in the presence of impurities in the system water. It is important to maintain the pH of the heating system filling water, between 6.5 and 8.5 with a hardness of 15 °F REDUCTION OF ELECTRICITY CONSUMPTION Electricity savings thanks to the low consumption modulating circulator, in class A. The circulator can be set in the operating modes: constant ∆t, proportional prevalence or constant speed . The presence of two NTC probes on the system flow and return allows constant modulation of the boiler operating conditions based on the requests of the heating system with a consequent increase in seasonal efficiency. The boiler's electrical consumption in stand by is less than 6 W DESIGNED TO FACILITATE PROFESSIONALS VICTRIX kW TT, produced on the new highly automated lines at the historic Immergas headquarters in Brescello, is a specific range of products developed on the “Top Tech” platform. It features special technical features designed to facilitate the work of professionals such as: Safety valve discharge piped into condensate drain; Cover casing for hydraulic connections, to better fit the boiler into domestic spaces; Direct accessibility to the electrical connection compartment of the main external devices (e.g. CARV2, external probe, CRONO 7) by simply removing the front aesthetic cover without the need to open the product. SELF-ADAPTING COMBUSTION The electronic gas valve allows air/gas control via a multifunction electrode placed inside the combustion chamber; the electronic board automatically adapts the combustion parameters in the event of variations in air or fuel density. This allows VICTRIX kW TT to be powered by any type of fuel (methane/LPG or propane air), by intervening only on the electronic board software even at a later time (for example when the Authorized Assistance Center starts up for the first time). The boiler is therefore supplied with a single product code . COMFORT High hydraulic performance: the innovative condensing module guarantees high flow rate, low risk of clogging due to impurities in the system water, greater resistance to corrosion thanks to the special alloy. High seasonal efficiencies: the boiler's wide modulation range allows for high seasonal efficiencies with consequent reduction in gas consumption . Thermoregulators: optional. They improve comfort and increase energy savings. DOMINUS App: optional. Simple and intuitive , it allows you to check the boiler operation and temperature, activate its switching on and off from any location via smartphone or tablet. EXTRA Comfort Formula: uses the most complete maintenance program that allows you to extend 5 years with free activation the conventional guarantee which, in collaboration with the Authorized Immergas Assistance Center, can be activated during the initial check. ENVIRONMENTAL COMPATIBILITY Eco-friendly technology: complies with the European ErP and ELD Directives, allows you to achieve high energy efficiency classes in heating and hot water production. Ecological class 5 (European standards UNI 297 and 483): the best for reduced nitrogen oxide emissions (NO X ). Renewable energy: can be combined with solar systems and hybrid systems with heat pumps. INSTALLATION Maximum flexibility: approved for indoor, built-in and outdoor operation, even in the open air . IPX5D electrical protection. Antifreeze as standard up to -5 °C. Maximum compactness: only 25 cm deep. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase

Read more less

SAVIO SUPEREVODENS 28S CONDENSING BOILER COMPLETE WITH METHANE FUME KIT - NEW ERP Model: SuperEVOdens 28S Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 29 kW Heating/DHW maximum useful power: 28.3 kW Yield name 60°/80°C: 97.7% Yield at 30% load: 98.9% High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) NOx class 2 Weighted NOx: 158 mg/kWh Minimum/maximum heating temperature: 40/85°C Minimum/maximum heating pressure 3.0/0.3 bar Expansion tank capacity 8 l (total) Minimum/maximum domestic hot water temperature 35/60°C Maximum flow rate (ΔT=25 K)/(ΔT=35 K): 16.3/11.6 l/min Specific sanitary flow rate (ΔT=30 K): 13.6 l/min Voltage / Power at nominal heat input V~/ W 230/93 IPX4D degree of protection Dimensions HxWxD 803x400x350; 44 kgs Power supply: methane or LPG Standard Digital electronic room thermostat Boiler support bracket and paper template Condensate collection siphon Quick instruction to the user SuperEVO dens SuperEVOdens is the condensing boiler designed for traditional systems and easily adaptable to new underfloor systems using SIMpatico, a hot water distribution system for heating. SuperEVOdens maintains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler deriving from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at typical operating temperatures of radiator systems, leads SuperEVOdens to have higher yields than traditional boilers. Characteristics: High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) Copper lamellar primary heat exchanger with large exchange surface and double circulation Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the water Sanitary plate heat exchanger in stainless steel Insulated mini-tank kept in temperature by the boiler (selectable function) to significantly reduce waiting times in the production of domestic hot water High efficiency pump with low energy consumption Digital control panel with backlit display Electronic card for: - Restart frequency adjustment - Adjustable primary circuit thermal inertia disposal - Circulator mode selection - Circulator anti-seize - Antifreeze safety - Chimney sweep function Integrated automatic by-pass 8 liter expansion tank Immunity to radio interference Magnetic sanitary flow switch Absolute heating pressure switch IPX4D degree of protection Possibility of integrating SuperEVOdens with Savio solar systems using the optional solar kit Propane air supply, methane and LPG High circulation primary exchanger It is the element that distinguishes the entire Savio range. It favors the flow of water into the heating system and, thanks to its reduced hydraulic resistance, adapts the boiler to the system and facilitates the transmission of heat to the radiators. Heat recovery   The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator is made of aluminium, has a finned coil which determines a large exchange surface and has a device to ensure that the boiler correctly discharges the condensate. Command panel Summer / winter / off setting Heating temperature regulator DHW temperature regulator Gauge Fault diagnostics and lockout status shown on display Heating and DHW temperature shown on the display Reset button Easily accessible electrical connections Arrangement for external probe Arrangement for remote control Thermoregulation By connecting the external probe (optional) directly to the boiler, climatic regulation can be used. SuperEVOdens will adapt the system water temperature to the external climatic conditions, ensuring that the desired room temperature is reached without waste and optimizing consumption. By using the climatic regulation, the regulation efficiency is also raised, giving greater value to your home. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BAXI LUNA DUO-TEC+ 28 GA LPG CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input kW 28.9 Heating nominal heat input kW 24.7 Sanitary nominal thermal power kW 28 Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.6% Efficiency at 100% Pn (50-30°C): 105.8% Expansion/pre-charge vessel capacity l/bar 8/0.8 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 16.1 Degree of protection: IPX5D NOx class (EN 483) 5 Dimensions (h x w x d): 763 x 450 x 345 mm ; 38.5 kgs Power supply: LPG Luna Duo-Tec+ Wall mounted gas condensing boilers ideal for both new build and replacement The new Duo-tec+ range of gas-fired condensing boilers has been specifically designed in compliance with the requirements of the Ecodesign and Labeling Directives, to make it particularly suitable both for new buildings and for replacing an old generator. In fact, in addition to the already known advantages of condensing technology such as high efficiency, energy saving and reduced polluting emissions, the new Duo-tec+ condensing boilers are characterized by: Complete range of models : heating only, with instantaneous DHW production, with integrated micro-storage tank, with integrated 40-litre storage tank. The range also includes the compact version (Compact+), the first Baxi condensing boiler in just 70 cm in height and 30 cm in depth. Digital control panel with backlit LCD display Wide modulation range 1:7 the reduction of on/off cycles translates into significant benefits in terms of energy savings and lower emissions Digital control panel The Duo-tec+ range of boilers is equipped with a digital control panel with backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and the heating. The display allows you to view all the information and set the operating parameters in a clear and immediate way. Wide modulation range 1:7 greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of the continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises Gas Adaptive Control The innovative GAC ( Gas Adaptive Control ) automatic combustion control system guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the actual power dissipated from the building avoiding excessive heating/cooling of the building. Total modulation pump The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ∆T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs Characteristics: Wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control High efficiency circulation pump with total modulation Digital control panel with large backlit LCD display Arrangement for combination with the Baxi integrated solar system Ø50 mm exhaust pipe: solution for restoring flues - mod. 24 kW Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less