ATTENTION THE PRODUCT IS MADE TO ORDER Chaffoteaux c EU condensing boiler Methane Low NOx code 3300726 Complete with flue gas exhaust kit Technical Features Model : Pharos Zelios EU 25 Reference Code: 3300726 Maximum Heating Power: 21.5 kW Maximum Thermal Power in Sanitary: 25.3 kW Energy Efficiency Class: A ACS Declared Load Profile: XXL Nominal Heat Output in Heating: 2.5 / 22.0 kW Nominal Thermal Capacity in Sanitary: 26.0 / 2.5 kW Combustion efficiency: 97.8% Stars Performance: **** Sound Power Level: 50 dB Residual Evacuation Prevalence: 104 Pa NOx class : 5 Smoke Temperature: 62° C CO2 content: 9.3% Maximum smoke flow rate: 41.6 Kg/h Expansion vessel capacity: 12 litres Heating Temperature: 36° / 60° C Kettle capacity: 180 l/min How much Instant Hot Water : 26.9 l/min Sanitary Water Pressure: 0.3 / 7 bar Power Voltage and Frequency (V,Hz) : 230 / 50 Electrical Power Consumption: 165 W Power supply: Methane Dimensions and Weight: Dimensions (HxWxD): 2000 x 600 x 660 mm Weight: 155 Kg Pharos Zelios EU Floor-standing condensing boiler with integrated storage and solar management Pharos Zelios EU combines the performance of two cutting-edge technologies, condensation and solar thermal, to ensure maximum energy savings every day. Pharos Zelios EU is the ideal answer for combined solutions with solar systems or different heating zones both in new buildings and to replace old floor-standing boilers. Equipped with Expert Control system manager as standard • Heating • Domestic Hot Water • Single Family Home Medium Protocol • Ebus2 communication • Individual Apartment • Replacement • Renovation   Compact​ Minimum footprint: 60 cm wide and less than 0.4 m2 of occupied surface Efficient Solar hot water production that covers 50 to 65% of needs, depending on the area. Climate control combined with a modulating ACS pump optimises the condensation phenomenon, ensuring additional savings. Health Comfort A 180 litre stratified storage tank and coil heat exchange surface area: 1.5 m². 3 stars of health comfort, the maximum level foreseen by the EN 13203 standard. Up to 43.9 l/min of domestic hot water flow rate thanks to the combined performance of the boiler, solar energy and the 180-litre stratified storage tank Ease of Use and Installation Quick installation thanks to the Plug&Burn solution: boiler, storage tank and accessories for solar thermal management are integrated inside the product. System manager "Expert Control" as standard: allows complete management of solar thermal, display and regulation of all parameters. Solar probe as standard. All components for managing the solar system are integrated into the product (high-efficiency modulating solar pump, flow meter, safety valve, 18-litre expansion vessel and pressure gauge). Ready for integration into a heating system via the new Ebus2 communication protocol (boiler, solar, system management modules up to 3 circuits with different temperatures and modulating thermoregulation accessories) Energy Saving and Respect for the Environment Up to 23% energy savings in combination with the room sensor and the SRA function. 40% reduction in CO2 emissions compared to a traditional heating system. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Victrix Zeus Superior 25 Product code : 3.030900 Energy class in heating: A Sanitary energy class: A Load prifle : XL Maximum nominal heat input in DHW: 25.9 kW Maximum nominal heat input in heating mode: 20.8 kW Minimum nominal heat input in DHW: 4.9 kW Minimum nominal heat input in heating mode: 2.5 kW Maximum useful thermal power in DHW: 25 kW Maximum useful thermal power in heating: 20.2 kW Minimum useful thermal power in DHW: 4.7 kW Minimum useful thermal power in heating: 2.3 kW Useful thermal efficiency at 100% Pn (80 / 60 °C) : 97% Useful thermal efficiency at 30% of the nominal load. (80 / 60 °C) : 102.3% Useful thermal efficiency at 100% Pn (40 / 30 °C): 107.1% Useful thermal efficiency at 30% of the nominal load. (40 / 30 °C) : 109.9% Minimum gas flow rate to the burner: 0.26 m 3 /h Maximum gas flow rate to the burner: 2.74 m 3 /h Weighted CO : 15 mg/kWh Weighted NO X : 21 mg/kWh Power supply: methane / LPG NO x class : 6 Minimum suction/exhaust head available: 2 Pa Maximum suction/exhaust available head: 151 Pa Nominal heating expansion vessel capacity: 8 litres Electrical protection degree : IPX5D Dimensions and weight Dimensions (HxWxD): 900x600x460 mm Empty weight: 63.9 kg Immergas Victrix Zeus Superior Murali condensing with 54 liter stainless steel boiler New design, hi-tech electronic card, hydraulic performance and excellent comfort in new homes and replacements with the 54 liter boiler. The new VICTRIX ZEUS SUPERIOR condensing boilers have powers of 25, 30 and 35 kW, a very wide modulation range ( from 10% to 100% of the power ) to raise efficiency, low consumption circulator and condensing module with coil large section to reduce the risk of clogging The ecological class of the VICTRIX ZEUS SUPERIOR is 6 : the best for low harmful emissions (CO and NOx). All models can discharge fumes from the wall and the standard clapper allows combination with positive pressure collective fume evacuation systems . The latest generation electronic card allows the management of up to 3 zones from the dashboard , the commands are carried out with the comfortable knobs and the large backlit touch key display VICTRIX ZEUS SUPERIOR can also be installed outdoors in protected places and are supplied with a single product code because they work with methane, LPG or propane air. The hydraulic connections are identical to the previous models and the connection group is standard to facilitate installers in replacements VICTRIX ZEUS SUPERIOR can achieve a higher energy classification, if combined with an advanced Immergas thermoregulator such as the SMARTECH PLUS or the CAR V2 SMARTECH PLUS Control boilers remotely and save money The SMART hi-tech wireless chronothermostat with Bluetooth technology allows you to adjust the heating temperature even with a smartphone using a dedicated app . The switching on or off of the heating can be based, through a special function, on the geolocation of family members : the app raises the temperature when a member of the family returns home and lowers it when the last one leaves. With the app you can manage up to 18 SMART thermostats even in different homes SMARTECH PLUS is easy to use and reads well from any angle thanks to the e-ink technology used in digital readers. It is also compatible, for some functions, with the virtual assistants Alexa and Google Home The advantages of SMARTECH Modulating regulation of the heating in time slots with the display or remotely with the dedicated app (internet connection or Wi-Fi required) Switching on and off at time slots or with the geolocation of family members on the app Switching on and off at time slots or with the geolocation of family members on the app Very low consumption: it runs on batteries with an autonomy of up to more than 2 years High legibility with e-ink display Control up to 18 SMART thermostats in different homes, via app 54-litre stainless steel boiler The stainless steel guarantees the inalterability of the boiler to the action of the water and the wide flange optimizes cleaning and maintenance operations. Inside the boiler there is a stainless steel coil wound in a double concentric spiral which ensures rapid heat exchange Multiple withdrawals of domestic hot water The capacity of the stainless steel boiler, combined with the excellent temperature regulation, have made it possible to obtain the marking, i.e. maximum sanitary performance, guaranteeing high comfort even with simultaneous withdrawals of domestic hot water. Sanitary expansion tank as standard Approved for outdoors Thanks to the new insulation that equips the stainless steel boiler and the standard protection down to 0 °C, the VICTRIX ZEUS SUPERIOR boilers can be installed outdoors in a partially protected place. With an appropriate optional kit it is possible to extend it down to -15 °C (in the presence of electricity and gas). The degree of electrical insulation is IPX5D Formula Comfort 10 It benefits from the most comprehensive maintenance program lasting 10 years with no activation costs , with the possibility of extending it up to 15 years . In collaboration with the Immergas Authorized Service Centre, it can be activated during the initial check Primary exchanger in stainless steel The primary exchanger that equips the VICTRIX ZEUS SUPERIOR is made with a single-tube exchange coil in stainless steel . The absence of collectors and circuits in parallel guarantees maximum reliability over time : there are no weldings. The single stainless steel spiral without bottlenecks allows for a perfectly balanced hydraulic circuit, considerably reducing pressure drops . The internal section, wide and constant , allows to limit deposits, reducing the risk of clogging in the case of impurities present in the water (for example in the case of replacing boilers on outdated systems). Due to this peculiarity, the VICTRIX ZEUS SUPERIOR are ideal for replacement New and elegant design, Hi-Tech electronics Equipped with dashboard closing hatch and large display that is always in view, backlit touch keys and comfortable knobs for making adjustments. The display is well lit and legible and the touch keys have excellent tactile feedback , in line with the high quality level of the product. In addition to the illumination of the keys, the card is equipped with an acoustic signal capable of highlighting the commands implemented by the user on the buttons The hi-tech electronics make numerous new functions available such as for example the possibility of managing 3 zones directly from the boiler dashboard or the convenience of setting 4 comfort time slots and 4 calendars, for programming the system zones and DHW The evolution in thermoregulation Systems with multiple zones Equipped as standard with latest generation electronics, it is possible to manage 3 zones with the aid of wireless ambient probes and concentrator (both optional). The ambient temperatures and the operating time slots are set directly from the boiler dashboard or remotely via the app (from a telephone, tablet or PC) with the aid of the optional DOMINUS interface kit . It is also possible to interface with home automation management systems with KONNEX X protocol (not supplied by Immergas) In particularly large detached villas, the management of the system can be entrusted to the DIM ErP system circuit breaker kit . The lower casing of the boiler is designed for fixing both the ambient probe concentrator and the DOMINUS interface card, making it easier for the installer to assemble the kits Single-zone systems These applications can be managed in a simple way through the SMARTECH PLUS or with the or with the CAR V2 , both optional. "Green series" plug-in flue The VICTRIX ZEUS SUPERIOR have a dedicated series of air intake/fume exhaust kits made in such a way as to guarantee high resistance to corrosion and considerable speed and functionality during installation, thanks also to the coupling system and gaskets seal in special material. VICTRIX ZEUS SUPERIOR boilers can be installed in sealed chamber and forced draft or open chamber and forced draft configuration Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NEW EXCLUSIVE EXCLUSIVE, A NEW STORY BEGINS. Through the innovative ACC electronic injection combustion, HYBRID READY integration and the new project design, EXCLUSIVE offers exclusive advantages in every installation variation. From the new EXCLUSIVE, A NEW STORY BEGINS. construction, redevelopment; from hybrid application in a multi-energy system to simple single installation, EXCLUSIVE represents the current and winning choice for those who are not satisfied and want to look beyond. Characteristics: Electronic injection combustion via ACC system EXCLUSIVE plus only the BeSMART Wi-Fi Comfort Control (optional) forms a class A+ system 94% (ETAs) of energy efficiency in heating Universal installation : Indoor, outdoor and recessed installation. IPX5D electrical protection degree Tempozero installation: Removing the casing NO longer necessary for electrical connections and calibration Low consumption modulating circulator (EEI≤ 0.20) 6 m head, electronically modifiable up to 7 m Hydraulic connections and external probe available as options Frost protection down to -5 °C as standard HYBRID READY boiler , Can be integrated via BUS in a multi-energy system to make boiler operation more effective in relation to other energy sources (can be combined with a Beretta hybrid system using the REC 10H interface available as an accessory) Talking display: User interface for direct communication using TEXT and ICONS Self-adapting: The boiler automatically adapts to different types of gas and installation - ZERO calibrations CO alarm Boiler CO level constantly monitored and calibrated for maximum safety Small size: Thanks to its compactness, EXCLUSIVE can also be easily installed in a wall unit LPG version selectable from parameter Gas transformation kit not necessary Europe strategy With the opening towards the management of multi-energy plants, the reduction of emissions and the optimization of consumption, Beretta signs with EXCLUSIVE the highest contribution in terms of respect for the environment, in view of the 20-20-20 objectives of the Union countries expected by 2020, reconfirming their commitment to an increasingly eco-sustainable future.        Exclusive: a milestone in the evolution of Beretta Combustion and electronics, i.e. the heart and brain of EXCLUSIVE, entirely designed in the Research and Development Laboratories of the historic Lecco headquarters, mark a turning point in Beretta's mural evolution and are the result of the spirit of innovation that has distinguished the brand since its origins. With EXCLUSIVE, the novelty of the project fits perfectly into the tradition of know-how and takes on a linear design, which reworks some aesthetic lines of the first boiler models in a modern key, in perfect continuity of style. Continuity that is also manifested in the re-proposition of the EXCLUSIVE name, which has always characterized the top of the Beretta range, with exclusive features and advantages. Class A+ system using only the BeSMART WiFi Comfort Control (optional) .   "talking" interface The control panel is one of the distinctive elements of EXCLUSIVE which confirms its innovative profile. In fact, there are many EXCLUSIVE functions, all to be discovered, through a modern 3.5” backlit LCD display, which communicates with the user through texts and icons. By means of the intuitive silk-screened operating keys it is also possible to access the settings and parameterizations of the boiler and the system. GREEN GEM OF EXCLUSIVE: LED light bar that signals the current operating status of the boiler, reflecting on the casing even with the door closed.   Exclusive Features: HOURLY PROGRAMMING : Programmable heating by hour and by single zone INTELLIGENT SYSTEM FILLING Autonomous filling activation and total safety SYSTEM PRESSURE Displayed DATE AND TIME Display as screensaver PREHEATING Domestic hot water preheating activation SCHEDULED MAINTENANCE Intelligent system that warns the user when boiler maintenance is due   Everywhere Exclusive: Thanks to BeSMART, Beretta's WiFi Comfort Control, controlling and managing home comfort is now possible wherever you are, through a simple and intuitive App, via smartphone and tablet. EXCLUSIVE is compatible with all BeSMART functions, even the most advanced. From home heating professionals, easy management of home comfort. Even away from home   Electronic injection combustion The ACC system, designed and developed by Beretta, allows in all circumstances to offer "first class" functionality, efficiency and low emissions. Using a sensor for detecting the flame ionisation current, which allows the electronics to continuously modulate the quantity of fuel injected, the system keeps the air/gas mixture constant at optimal values ​​over the entire modulation range of the delivered power. Thanks to the ACC system, combustion adjusts itself, thus eliminating the need for any calibration and allowing the boiler to operate with different gas compositions. Particular attention is paid to CO emissions, through a self-diagnosis that intervenes on the burner before the emission threshold allowed by the legislation is exceeded. [A] Cylindrical burner in stainless steel [B] Integrated electronic board [C] Traditional ga valve with modulator [D] Modulating fan with Hall effect     Hybrid Ready EXCLUSIVE is a HYBRID READY solution. The boiler was born as a fundamental element of the offer of HYBRID READY products, which constitute the new hybrid technology system conceived and developed in the Beretta Research Laboratories. This system, created to meet the current and future needs of integration and governance of the various energy sources (Gas/Electricity/Renewables), also includes the most innovative methods of energy accumulation and distribution. EXCLUSIVE, AS A HYBRID READY SOLUTION, IS THE IDEAL CHOICE FOR THOSE WHO WANT TO LOOK AHEAD AND INVEST IN A PRODUCT WHICH WILL MAINTAIN ITS ITS VALUE UNCHANGED OVER TIME. Thanks to the new communication BUS with which it is equipped, EXCLUSIVE is able to interact perfectly with the Energy Manager REC 10H, a real thinking brain that constantly monitors the hybrid system created, to always offer the best comfort in an efficient and effective way. The Beretta hybrid, distinguishing itself for its modular approach to the world of multi-energies, is therefore able to offer increasingly tailored comfort and to evolve over time, with the inclusion of new components that increase efficiency   Beretta is “ERP”. The concrete commitment towards an eco-sustainable future   The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations simultaneously issued for the energy labeling of products will also become effective in addition to the corresponding Directive 2010/30/EU.  The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands.   In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual devices. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with a nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency.   Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Sime Praktica 30 HE condensing boiler Low NOx flue gas kit methane - New ErP Nominal thermal power (80-60°C) kW 23.7 Nominal thermal power (50-30°C) kW 25.7 Reduced thermal power G20 (80-60°C) kW 4.5 Reduced thermal power G20 (50-30°C) kW 5.1 Reduced thermal power G31 (80-60°C) kW 4.5 Reduced thermal power G31 (50-30°C) kW 5.1 Nominal heat input in heating kW 24 DHW nominal heat input kW 30 Reduced heat input G20/G31 kW 4.8 Useful efficiency min/max (80-60°C) %94.3/98.7 Useful efficiency min/max (50-30°C) % 105.5/107.1 Useful efficiency 30% of the load (40-30°C) % 108.5 Yield min. of combustion in situ (Presidential Decree 311) % 92.74 ELECTRICAL DATA Power supply voltage/frequency V/Hz 230/50 Electric absorbed power max W 73 Electric power absorbed min W 54 Electrical power absorbed by the system pump W 41 Shutdown losses at 50°C (EN 15502) W 120 Electrical protection degree IP X5D ENERGY PERFORMANCE Seasonal heating energy efficiency class. TO Seasonal heating energy efficiency %93 Heating sound power dB (A) 58 Sanitary energy efficiency class A Sanitary energy efficiency % 84 Declared load health profile XL HEATING PERFORMANCE Heating adjustment range °C 20/80 Boiler water content 5.10 l Max working pressure bar 3 Max operating temperature °C 85 Expansion vessel capacity l 9 HEALTHCARE PERFORMANCE Nominal heat input kW 30 Reduced heat input G20/G31 kW 4.8 DHW adjustment range °C 10/60 Specific sanitary flow rate (EN 13203) l/min 13.5 Continuous DHW flow (∆t 25/35°C) l/min 16.7/11.9 DHW flow rate min l/min 2 Sanitary pressure min/max bar 0.5/7.0 Dimensions HxWxD mm 702x400x250 PRAKTICA Premixed condensing gas wall mounted boiler for heating only and instantaneous hot water production Installation type: B23P-B33P-B53P-C13-C33-C43-C53-C63-C83-C93 NOx emission class 6 (EN 15502-1:2015) Microprocessor electronic card with automatic adjustment of ignition power and maximum heating Automatic ignition with flame ionization control Degree of electrical protection to water IP X5D Primary water/fume coil exchanger in AISI 316L stainless steel Sanitary plate heat exchanger in stainless steel Heating system expansion tank Motorized diverter valve Retroactive combustion control with electronic gas valve Fume evacuation fan with electronic speed variation High efficiency system pump with low energy consumption (ErP) By-pass which ensures the circulation of water in the boiler when taps and thermostatic valves are used in the system Safety thermostat against overheating of the primary exchanger Smoke overheating probe 3 bar system safety valve Anti-blocking function of the pump and the diverter valve which activates automatically every 24 hours if there have been no requests for heat Antifreeze function which activates automatically if the water temperature in the boiler falls below the value set at parameter “tS 1.0” and, in the presence of an external probe, if the external temperature drops below the value set in parameter “tS 1.1” Chimney sweep function which lasts 15 minutes and facilitates the task of qualified personnel for measuring parameters and combustion efficiency Control panel equipped with display with numerical code self-diagnosis Knobs for adjusting the heating and domestic hot water temperatures Arrangement for SIME HOME remote control connection (optional) Protection of hydraulic fittings to be placed under the boiler cod. 8094530 (optional) Suitable for operation in a partially protected place according to EN 15502, with a maximum ambient temperature of 60°C and a minimum of -5°C Integrated climatic regulation Manual system loading device and water pressure control manometer Pressure transducer which blocks the boiler in case of water shortage Connections to the system in brass (DIN) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BERETTA METEO GREEN AND BOX 25 CNG or LPG CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP Code: 20104066 METEO GREEN E BOX : it is a class A+ system without the addition of options Very high modulation BeSMART comfort control as standard Frost protection down to -15°C as standard Thermoregulation with standard external probe New condensing exchanger in aluminum with high flow rate and front access Specific for use in built-in BOX Low polluting emissions: class 6 (UNI EN 15502) Low consumption modulating circulator head 6m (can be modified up to 7m) IPX5D electrical protection degree Possibility of intubating flues with the special flue in PP ø 60 (up to 23 m) and ø 50 (up to 19 m)* Plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres model 25 E Technical data table: Heating Nominal heat input kW kcal/h 20.00 17200 DHW Nominal heat input kW kcal/h 25.00 21500 Warm-up exercise Maximum pressure bar 3 3 3 Minimum pressure for standard operation bar 0.25 - 0.45 0.25 - 0.45 0.25 - 0.45 Maximum temperature °C 90 90 90 Sanitary practice: Maximum pressure bar 6 6 - Minimum pressure bar 0.15 0.15 - Dimensions and weight Height - Width - Depth Height - Width - Depth (BOX version) mm 890 - 553 - 274 1223 - 655 - 287 Weight kg. 46 Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Sime Praktica 25 HE condensing boiler Low NOx flue gas kit methane - New ErP Nominal thermal power (80-60°C) kW 19.8 Nominal thermal power (50-30°C) kW 21.2 Reduced heat output G20 (80-60°C) kW 3.8 Reduced heat output G20 (50-30°C) kW 4.2 Reduced thermal power G31 (80-60°C) kW 4.3 Reduced thermal power G31 (50-30°C) kW 4.7 Nominal heat input in heating kW 20 DHW nominal heat input kW 24 Reduced heat input G20/G31 kW 4.0/4.5 Useful efficiency min/max (80-60°C) % 95.4/98.8 Useful efficiency min/max (50-30°C) % 105.0/106.1 Useful efficiency 30% of the load (40-30°C) % 108.4 Yield min. of combustion in situ (Presidential Decree 311) % 92.59 ELECTRICAL DATA Power supply voltage/frequency V/Hz 230/50 Electric absorbed power max W 67 Electric power absorbed min W 53 Electrical power absorbed by the system pump W 41 Shutdown losses at 50°C (EN 15502) W 120 Electrical protection degree IP X5D ENERGY PERFORMANCE Seasonal heating energy efficiency class. TO Seasonal heating energy efficiency % ninety two Heating sound power dB (A) 54 Sanitary energy efficiency class A Sanitary energy efficiency % 89 Declared load sanitary profile HEATING PERFORMANCE Heating adjustment range °C 20/80 Boiler water content 5.10 l Max working pressure bar 3 Max operating temperature °C 85 Expansion vessel capacity l 9 HEALTHCARE PERFORMANCE Nominal heat input kW 24 Reduced heat input G20/G31 kW 4/4.5 DHW adjustment range °C 10/60 Specific sanitary flow rate (EN 13203) l/min 11.5 Continuous DHW flow (∆t 25/35°C) l/min 13.8/9.8 DHW flow rate min l/min 2 Sanitary pressure min/max bar 0.5/7.0 Dimensions HxWxD mm 702x400x250 PRAKTICA Premixed condensing gas wall mounted boiler for heating only and instantaneous hot water production Installation type: B23P-B33P-B53P-C13-C33-C43-C53-C63-C83-C93 NOx emission class 6 (EN 15502-1:2015) Microprocessor electronic card with automatic adjustment of ignition power and maximum heating Automatic ignition with flame ionization control Degree of electrical protection to water IP X5D Primary water/fume coil exchanger in AISI 316L stainless steel Sanitary plate heat exchanger in stainless steel Heating system expansion tank Motorized diverter valve Retroactive combustion control with electronic gas valve Fume evacuation fan with electronic speed variation High efficiency system pump with low energy consumption (ErP) By-pass which ensures the circulation of water in the boiler when taps and thermostatic valves are used in the system Safety thermostat against overheating of the primary exchanger Smoke overheating probe 3 bar system safety valve Anti-blocking function of the pump and the diverter valve which activates automatically every 24 hours if there have been no requests for heat Antifreeze function which activates automatically if the water temperature in the boiler falls below the value set at parameter “tS 1.0” and, in the presence of an external probe, if the external temperature drops below the value set in parameter “tS 1.1” Chimney sweep function which lasts 15 minutes and facilitates the task of qualified personnel for measuring parameters and combustion efficiency Control panel equipped with display with numerical code self-diagnosis Knobs for adjusting the heating and domestic hot water temperatures Arrangement for SIME HOME remote control connection (optional) Protection of hydraulic fittings to be placed under the boiler cod. 8094530 (optional) Suitable for operation in a partially protected place according to EN 15502, with a maximum ambient temperature of 60°C and a minimum of -5°C Integrated climatic regulation Manual system loading device and water pressure control manometer Pressure transducer which blocks the boiler in case of water shortage Connections to the system in brass (DIN) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello START AQUA CONDENS 25 BIS condensing boiler with 45 lt boiler complete with Methane - ErP fume exhaust kit Technical data Heating Nominal heat input kW 20.00 Nominal thermal power (80°/60°) kW 19.50 Sanitary technical data Nominal heat input kW 25.00 Nominal thermal power (*) kW 25.00 Profit return 30% (47th return) % 102.2 99.8 Characteristics Electrical protection degree IP X5D Maximum absorbed electrical power W 110 Electric power supply Volt -Hz 230/50 Expansion vessel l 8 Quantity of hot water at ∆t 25°C l/min 14.3 Dimensions WxDxH mm 600x450x1005 mm; 66 kgs START WATER CONDENS Start Aqua Condens is a wall mounted boiler with a 45 liter stainless steel boiler. The Riello heat exchanger made entirely of aluminum guarantees efficiency and durability, high head and reduction of polluting emissions. It is available with 25 kW power. “Range Rated” certification which allows the nominal power of the boiler to be adapted to the effective thermal requirements of the system. Three-speed circulator - Standard thermoregulation on the board in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Standard natural gas operation with possibility of conversion to LPG (G31) (accessory), this modification is the responsibility of the installer or the technical assistance service Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Savio InoxDens 24s condensing boiler complete with class A Low NOx methane flue exhaust kit

Read more less

Technical features Energy class in heating: A Energy class in sanitary: A Load profile: XL Heating performance: Thermal input (min./max): 3.7/22 kW Useful power (min./max.): 3.95/21.4 kW Useful thermal efficiency: 98.0 % Idle efficiency (60/80°C): 97.5/87.8 % Heating output max/min (80°C-60°C): 21.4/3.4 kW Performance stars (dir. 92/42/EEC): **** Healthcare performance: Thermal input (min./max): 3.7/28.9 kW DHW thermal power (max/min): 24.9/3.5 kW Heating circuit: Expansion vessel pre-charge pressure: 1 bar Maximum heating pressure: 3 bar Expansion vessel capacity: 8 L Min/max heating temperature (high temperature range): 35 / 82 °C Min/max heating temperature (low temperature range): 20 / 45 °C Healthcare circuit: Min/max domestic hot water temperature: 36 / 90 °C Specific flow rate in sanitary mode (10 min. with ∆T=30°C: 12.1 l/min Instantaneous quantity of hot water ∆T=25°C: 15.5 l/min Instantaneous quantity of hot water ∆T=35°C: 10.4 l/min Sanitary comfort stars (EN13203): *** Minimum withdrawal of hot water: 2 l/min Max/min domestic water pressure: 7.0 / 0.2 bar Electrical data: Protection index IPX5D Class 6 NOx Energy efficiency index of the circulator: EEI ≤ 0.23 Minimum ambient temperature of use: >0°C Total absorbed electric power: 67 W Power supply: METHANE (G20/G30) Dimensions: (HxWxD): 745x400x385mm; Weight: 29.7kg Pigma is the new CHAFFOTEAUX boiler, which is part of the Advance Range, resulting in the category leader with a completely renewed design, using the innovative SpinTech exchanger, electronic combustion control, integrated Chaffolink connectivity and Expert Control and external probe as standard, guaranteeing extremely high performance with extremely low fuel consumption. Can be installed in partially protected places. SpinTech features: Exchanger that works with a stainless steel monospiral New single coil primary heat exchanger in stainless steel Passage sections increased by 142% compared to the previous version 1 m more head Seasonal yield at 94% Class A+ thanks to the standard thermoregulation accessories Performance certified by the TÜV RHEINLAND Group. Give Comfort: Modulation ratio 1:7 Optimized internal silencer SRA function Gas transformation with kit included as standard Ready for Chaffolink connectivity Advantages: Installation in partially protected places Smoke outlets 80, 60, 50 mm Intuitive electrical connections Up to 20% energy savings in combination with Expert Control and the SRA function Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6.

Read more less

optional box SAVIO INOXDENS HE 25S* Condensing Boiler Complete With Methane Fume Exhaust Kit - NEW ErP Model: Edilia HE Natural gas product code 10314.1011.0 Energy class A ErP specifications Heating/DHW nominal heat input 29.0 / 33.5 kW Heating/DHW maximum useful power 60°/80°C * 28.2 / 32.5 kW Energy Efficiency ★★★★ NOx class 6 Minimum/maximum heating pressure bar 0.3 / 3.0 Minimum/maximum DHW pressure bar 0.3 / 10.0 Degree of protection n° IPX5D Height x Width x Depth mm 1200x600x240 EDILIA Edilia HE is the new Savio range of built-in condensing boilers . Excellent performance and high yields that last over time thanks to the innovative heat exchanger. Ease of use thanks to the digital control panel with display designed to communicate with the user easily and comfortably. Available in versions for heating and domestic hot water production Edilia HE presents a complete range of powers, 20 and 35 kW combi models in the same extremely compact dimensions: 1200 x 600 x 240 mm. Both versions of Edilia HE are in class A , therefore they benefit from the tax deduction according to current legislation. Main features High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) Sanitary comfort (★★★ EN 13203) Primary condensing exchanger in stainless steel with steel lining to offer maximum resistance to corrosion Total premix burner, built in stainless steel (Class NOx 6) Modulation 1:5 CNG and also LPG Sanitary plate heat exchanger in stainless steel 7 l expansion tank for mod. 25S and 10 l for mod. 35S High efficiency pump with low energy consumption Maximum power adjustable according to the system Degree of protection IPX5D Recessed installation in the wall Integration with Savio solar systems, using a solar kit Digital control panel with backlit display Analog reading of the pressure on the machine, digital on the remote Arrangement for remote control (optional) and external probe as standard High circulation single coil primary heat exchanger Savio introduces the new stainless steel heat exchanger for condensing boilers to the market: Round . Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. By using a single stainless steel strip to produce the coil, including inlet/outlet fittings, the following benefits are achieved: Accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange The water flow is constant for a longer life of the product Reduction of pressure drops with optimized circuit The ease of cleaning and the sturdiness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations . Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. Thermoregulation By connecting the external probe (standard) and the remote control (optional) directly to the boiler, climatic regulation can be used. Edilia HE will adapt the system water temperature to the external climatic conditions, ensuring that the desired room temperature is reached without waste and optimizing consumption . By using the climatic regulation, the regulation efficiency is also raised, giving greater value to your home . Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

optional box Savio Edilia HE 35 built-in LPG condensing boiler complete with low NOx flue exhaust kit Cassone Optional Model: Edilia HE LPG product code 10304.1012.0 Energy class A ErP specifications Heating/DHW nominal heat input 29.0 / 33.5 kW Heating/DHW maximum useful power 60°/80°C * 28.2 / 32.5 kW Energy Efficiency ★★★★ NOx class 6 Minimum/maximum heating pressure bar 0.3 / 3.0 Minimum/maximum DHW pressure bar 0.3 / 10.0 Degree of protection n° IPX5D Height x Width x Depth mm 1200x600x240 EDILIA Edilia HE is the new Savio range of built-in condensing boilers . Excellent performance and high yields that last over time thanks to the innovative heat exchanger. Ease of use thanks to the digital control panel with display designed to communicate with the user easily and comfortably. Available in versions for heating and domestic hot water production Edilia HE presents a complete range of powers, 20 and 35 kW combi models in the same extremely compact dimensions: 1200 x 600 x 240 mm. Both versions of Edilia HE are in class A , therefore they benefit from the tax deduction according to current legislation. Main features High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) Sanitary comfort (★★★ EN 13203) Primary condensing exchanger in stainless steel with steel lining to offer maximum resistance to corrosion Total premix burner, built in stainless steel (Class NOx 6) Modulation 1:5 CNG and also LPG Sanitary plate heat exchanger in stainless steel 7 l expansion vessel for mod. 25S and 10 l for mod. 35S High efficiency pump with low energy consumption Maximum power adjustable according to the system Degree of protection IPX5D Recessed installation in the wall Integration with Savio solar systems, using a solar kit Digital control panel with backlit display Analog reading of the pressure on the machine, digital on the remote Arrangement for remote control (optional) and external probe as standard High circulation single coil primary heat exchanger Savio introduces the new stainless steel heat exchanger for condensing boilers to the market: Round . Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. By using a single stainless steel strip to produce the coil, including inlet/outlet fittings, the following benefits are achieved: Accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange The water flow is constant for a longer life of the product Reduction of pressure drops with optimized circuit The ease of cleaning and the sturdiness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations . Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. Thermoregulation By connecting the external probe (standard) and the remote control (optional) directly to the boiler, climatic regulation can be used. Edilia HE will adapt the system water temperature to the external climatic conditions, ensuring that the desired room temperature is reached without waste and optimizing consumption . By using the climatic regulation, the regulation efficiency is also raised, giving greater value to your home . Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Beretta EXCLUSIVE X 25 C low NOx condensing boiler complete with flue gas exhaust kit 20187794 Methane Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A Declared load profile XL Characteristics of heating/DHW operation: Heating thermal capacity (max-min) kW 20 - 3.6 Nominal DHW heat input (max-min) kW 25 - 3.6 NOx class 6 IP X5D degree of protection Supply voltage V-Hz 230 - 50 Max pressure-temperature bar-°C 3 - 90 Max pressure bar 8 Boiler dimensions (HxPxL) mm 740x275x420 EXCLUSIVE X EXCLUSIVE X, with 5 models (3 of which combined and 2 'heating only'), from 25 to 35 kW of power, is able to best satisfy the multiple installation needs: from new buildings to redevelopment, from single installation to application hybrid in multi-energy system. Thanks to the ACC Combustion system, each model self-adapts to different types of gas, without the need for "dedicated" codes for methane, LPG and propane air(*), or gas conversion kits EXCLUSIVE X , TECHNOLOGY FOR A GREEN LIFESTYLE From the R&D laboratories of Beretta comes EXCLUSIVE X, the new condensing boiler that marks a further step in the evolution of the EXCLUSIVE range, whose name has always characterized the top of the brand's wall-mounted offer. Combustion and electronics, which represent the heart and brain of the boiler, have been entirely redesigned to offer an even more performing and responsive product to the European objectives of environmental sustainability. EXCLUSIVE X is the ideal choice for those who are not satisfied and are looking for green solutions. EX CLUSIVE INNOVATION The new stainless steel exchanger, the innovative electronics with hybrid function integrated in the boiler, without external remote controls, and the ability to process mixtures of natural gas and hydrogen up to 20% give EXCLUSIVE X a highly technological profile, ensuring maximum energy saving, which translates into an economic advantage for the user . EXCLUSIVE PERFORMANCE EXCLUSIVE X represents the spearhead of the Beretta offer. Thanks to the new optimized plate heat exchanger , the range achieves sanitary performance at the top of the category in terms of efficiency, temperature stability and waiting times. The refined ACC electronic combustion system, which allows the quantity of fuel delivered to be continuously modulated, offers “best-in-class” efficiency and functionality in all circumstances, reducing harmful emissions to a minimum. EXCLUSIVE BERETTA The new range represents the synthesis of Beretta's advanced research, in continuity of style with the best tradition of the brand. Continuity that manifests itself both in the aesthetics of the product, which takes up the lines of the first Beretta boiler models, reinterpreting them in a modern key, and in the simplicity of use and installation flexibility, among the distinctive features of the brand, which have always been appreciated by the market A NEW HEART OF STEEL EXCLUSIVE X is equipped with a new primary exchanger in stainless steel , with a smooth tube with a large section, to ensure the best efficiency and cleanliness over time. Stainless steel, in addition to the high resistance to the corrosive action of acid condensate, prevents the internal formation of oxides and other electrochemical phenomena typical in installation on old systems. The geometry with a single wound coil (hydraulic circuit in series) guarantees constant flow in all sections of the exchanger and intrinsically prevents phenomena of clogging. Front access facilitates periodic maintenance and cleaning of the combustion chamber. COMBUSTION WITH ELECTRONIC INJECTION The ACC system, refined by Beretta for the EXCLUSIVE X , allows in all circumstances to offer functionality, efficiency and low emissions that are “first in class”. Using a sensor for detecting the flame ionization current, which allows the electronics to continuously modulate the quantity of fuel injected, the system keeps the air/gas mixture constant at optimal values ​​over the whole modulation range of the delivered power (constant CO2 value). Thanks to the sophisticated ACC system, combustion adjusts itself, thus eliminating the need for any calibration and allowing the boiler to operate with different gas compositions. Particular attention is paid to CO emissions, through a self-diagnosis that intervenes on the burner before the emission threshold allowed by the legislation is exceeded. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less