Technical features Product code: 20087429   Energy label specifications according to the European ErP directive   Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Domestic hot water/heating nominal heat output: 8.8÷23.4 kW Energy efficiency (92/42/EEC) ** Useful efficiency at Pn* (50°C-30°C): 90.8% Profit return 30% (47th return): 90% Open chamber, natural draft. Quantity of hot water with Δt 25°C: 13.4 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxwxd) mm 740 x 450 x 250 ; 32 kgs Power supply: METHANE General characteristics RESIDENCE EXTERNAL Residence Externa is specifically designed for outdoor installation and stands out for its extremely small dimensions; built with specific materials to operate in absolute reliability even in difficult environmental conditions. Residence Externa is available in powers of 24 and 28 kW. High-efficiency hot water heat generator for both exposed (Residence Externa) and built-in (Residence IN) outdoor installation, consisting of: A wall structure with an open combustion chamber with natural draft. atmospheric primary air burner in stainless steel equipped with automatic ignition. ionization flame control and proportional regulation system of gas flow and air flow both in heating and DHW. CTR system for more rapid achievement of the desired comfort and a reduction in consumption, the formation of limescale in the boiler and temperature changes in the heating bodies. Low consumption circulator (IEE 0.20). Remote control panel and external probe (optional) allow you to activate the climate control. Double exchanger: domestic hot water production with plate exchanger. Coating in weather resistant material. electrical protection degree IP X5D. The equipment is completed by: Antifreeze function (up to -3°C for Residence Externa and up to -5°C for Residence IN): which protects the heating and DHW circuits up to -5°C with the possibility of extending the protection down to -15° C (optional) Antifreeze: when the boiler water temperature drops to around 7°C, the circulator is activated and remains in operation until the temperature rises to around 10°C; if, on the other hand, the temperature drops below 4°C, the burner also switches on at minimum power until, with the boiler in heating mode, the water temperature reaches 30°C; then the burner switches off and after 30” the circulator. Furthermore, when the temperature of the water in the DHW circuit drops to approximately 5°C, the circulator is activated and the burner ignites at minimum power until, with the boiler in DHW function, the temperature of the water in the boiler reaches 55°C; then the burner switches off and after 10” the circulator. Circulator anti-blocking: the circulator is activated for one minute approximately 18 hours after the last operating cycle. Three-way valve anti-blocking: the valve is activated to carry out an operating cycle (heating position and return to DHW position) approximately 18 hours after the last intervention . The new European regulations for heat generators ErP is the acronym for " Energy related Products " and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing energy consumption of products through eco-design (“eco-design”). The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water. From the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players. The energy labeling of products for heating and domestic hot water production. The regulations issued require that all products intended for heating and/or for the production of sanitary water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range. In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to builders. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER SAUNIER DUVAL THEMA 4 30 AND OPEN CHAMBER METHANE - ErP Technical features Heating efficiency class: C Sanitary efficiency class: B Sanitary load profile XL Type: Heating and domestic hot water Domestic hot water production technology: Aquaspeed® Nominal power PMin/Max heat. 80/60 °C (kW) Heating: 10.5 \ 28.8 Partial load efficiency 30% 40/30 °C (%): 89.6 Min/Max Rated Power (60°C) (kW) 6/30 Domestic hot water temperature Min/Max (°C) 35/60 Electric power absorbed Max (W) 93 Dimensions H / W / D (mm) 800 / 440 / 338 Power supply: METHANE General characteristics THEMA 4 E Wall mounted traditional open chamber boiler with pre-heating and Acquaspeed system Sanitary comfort High performance Low consumption Thema 4 traditional boilers adapt to every need. The exclusive Aquaspeed® system guarantees maximum levels of sanitary comfort. The range includes 2 open chamber models of 25 kW and 30 kW. Characteristics Energy classification ** (92/42/EEC) with efficiency up to 89.6% (30% of Pn) 3-star sanitary comfort (EN 13203-1), thanks to the Aquaspeed® system which guarantees the immediate delivery of domestic hot water at the desired temperature. The control panel on the boiler, with backlit liquid crystal display and negative contrast, makes the regulation of Thema 4 E extremely easy and immediate: with a few simple gestures it is possible to regulate the temperatures of the heating and domestic hot water, for any need . The small dimensions make all the Thema 4 E models perfect for replacement in existing systems. User interface with digital display The new user interface of the Micra 4 E range combines aesthetics and ease of use. The keys and symbols used allow the user to adjust the device intuitively according to one's needs. Simple to program Heating flow temperature adjustment Domestic hot water temperature adjustment The pre-heating allows an abundant quantity of domestic hot water already with low boiler temperatures. The exclusive Aquaspeed® system guarantees the immediate delivery of domestic hot water at the desired temperature. The advantage of the Aquaspeed® system is threefold: hot water is immediately supplied at the desired temperature; useless waiting is avoided, increasing user comfort; the waste of water is limited while waiting for it to reach the right temperature. The Aquaspeed® system can be easily activated or deactivated: the well-being you desire has never been so simple and immediate! The boiler display indicates visually whether the function is activated. Hot water at the desired temperature after just 2 seconds (instead of the classic 45. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER BERETTA MYNUTE S 24 CAI LPG OPEN CHAMBER - NEW ErP Product name BERETTA MYNUTE S 24 CAI LPG BOILER Technical features Product code: 20095667 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Heating/DHW nominal heat output: 24 kW Quantity of hot water with Δt=25°C: 14 l/min Dimensions (hxwxd) mm 740 x 400 x 336 METHANE power supply Legend: C (heating + sanitary water), A (Open Room) I (electronic ignition, ionization control). MYNUTE S - ErP The benchmark for standard wall mounted boilers. The innovation: Designed to facilitate replacement The new Mynute S, a point of reference in the range of Beretta Clima standard wall-mounted boilers, is specifically designed to make installation particularly easy, especially when replacing with other products. The models in the Mynute S range comply with Legislative Decree 311/06. The reliable: Technology at the service of quality The new Mynute S offers highly reliable combustion and electronics and boasts the high degree of electrical protection IPX5D. The range is therefore characterized by safety and solidity thanks to the components with which it is made which belong to a high quality standard. The boiler features the most innovative safety devices: control systems that monitor the presence of the flame, on the correct evacuation of fumes, on temperatures and pressures. The anti-blocking cycles of the circulator and the board anti-freeze system allow the appliance to last longer over time. The new Mynute S also boasts the Survivor Function which allows it to continue to function in the event of failure of the sanitary NTC probe. The elegant: A modern style that integrates with any environment The new Mynute S is characterized by a particularly elegant aesthetic and is equipped with a simple and intuitive digital display which makes information on the status of the appliance immediately usable. The modern ergonomic knobs allow you to perform all the functions necessary for using the boiler. Characteristics: CAI boilers, ErP version, equipped with low consumption circulator (EEI20) Specifically designed to facilitate the replacement of pre-existing wall-mounted boilers 9 liter expansion tank Simple and intuitive digital display Arrangement for climatic thermoregulation (optional external probe) Can be interfaced with the REC 08 Remote Control Panel (optional) IPX5D electrical protection degree Plumbing fittings, gas and sanitary taps (optional) For gas conversion, contact authorized Beretta Technical Assistance Centres Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER UNICAL !DEA AC 23 PLUS METHANE OPEN CHAMBER - ErP Technical features Seasonal efficiency class for heating: Class C Sanitary Seasonal Efficiency Class: Class B Declared load profile: M Nominal useful power: kW 23 Minimum useful power: kW 10.3 Combustion efficiency at nominal load 91.0% Combustion efficiency at reduced load 88.6% Minimum pressure of the heating circuit bar 0.5 Maximum pressure of the heating circuit bar 3 Minimum flow rate of the heating circuit. (∆t 20 °C) 7.5 l/min Domestic hot water specific flow rate (∆t 30 °C) 11.0 l/min Total capacity of expansion tank 6 l IP X4D degree of protection Power supply: methane Characteristics Monothermal exchanger + sanitary plate exchanger and 3-way valves Ignition and electronic detection single electrode Proportional continuous gas modulation by microprocessor both in heating and DHW production phases with control temperature probe Antifreeze protection on the primary heating circuit on 2 levels: internal heating activation, block with signal in the event of gas shortage Pump anti-blocking timer which prevents seizure in the event of prolonged inactivity High efficiency modulating circulator equipped with built-in automatic deaerator All-metal shell enamelled with epoxy-polyester paint, insulated with acoustic/thermal insulation (8 mm thick) complete with heat-reflecting layer Facilitated maintenance with tilting panel and front access Included: Hydrometer, automatic differential by-pass, 6 liter expansion vessel, safety valve and thermostat, low water pressure switch, priority flow switch with filter Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product code: 20100122   Energy label specifications according to the European ErP directive   Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Domestic hot water/heating nominal heat output: 24 kW Energy efficiency (92/42/EEC) ** Useful efficiency at Pn* (50°C-30°C): 89.8% Profit return 30% (47th return): 89.5% Open chamber, natural draft. Quantity of hot water with Δt 25°C: 13.8 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 740 x 400 x 332 ; 30 Kgs Power supply: LPG General characteristics START Start is the wall-mounted boiler for new housing construction. Characterized by a modern design despite its essentiality, it is ideal for heating and the production of domestic hot water in small and medium-sized domestic users. Start is available in the power of 24 kW. Characteristics: Double exchanger: domestic hot water production with plate exchanger for greater resistance to the formation of limescale CTR system for a quicker achievement of the desired comfort and a reduction in consumption, and in the temperature ranges in the heating bodies 8 liter expansion vessel Low consumption circulator (IEE≤0.20) Antifreeze function that protects the heating and DHW circuits down to -3°C Standard thermoregulation on the boiler board in combination with the external probe (optional) Can be interfaced with the Remote Control Panel Electrical protection degree IP X5D Standard hydraulic fittings Natural gas operation as standard with the possibility of conversion to LPG (G31) and propane air (accessories), this modification is the responsibility of the installer or the technical assistance service. ErP: Energy related Products The new European regulations for heat generators ErP is the acronym for " Energy related Products " and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing energy consumption of products through eco-design (“eco-design”). The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water. From the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players.   The energy labeling of products for heating and domestic hot water production The regulations issued require that all products intended for heating and/or for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range. In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to builders. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Seasonal efficiency class for heating: Class C Sanitary Seasonal Efficiency Class: Class B Declared load profile: M Nominal useful power: kW 23 Minimum useful power: 9.9 kW Combustion efficiency at nominal load 91.0% Combustion efficiency at reduced load 88.0% Minimum pressure of the heating circuit bar 0.5 Maximum pressure of the heating circuit bar 3 Minimum flow rate of the heating circuit. (∆t 20 °C) 7.12 l/min Specific sanitary water flow rate (∆t 30 °C) 10.5 l/min Total capacity of expansion tank 6 l IP X4D degree of protection Power supply: methane Characteristics Bithermal exchanger Ignition and electronic detection single electrode Proportional continuous gas modulation by microprocessor both in heating and DHW production phases with control temperature probe Antifreeze protection on the primary heating circuit on 2 levels: internal heating activation, block with signal in the event of gas shortage Pump anti-blocking timer which prevents seizure in the event of prolonged inactivity High efficiency modulating circulator equipped with built-in automatic deaerator All-metal shell enamelled with epoxy-polyester paint, insulated with acoustic/thermal insulation (8 mm thick) complete with heat-reflecting layer Facilitated maintenance with tilting panel and front access Included: Hydrometer, automatic differential by-pass, 6 liter expansion vessel, safety valve and thermostat, low water pressure switch, priority flow switch with filter

Read more less

GAS BOILER BERETTA METEO 24 CAI AG LPG OPEN CHAMBER -NEW ErP Technical features Product code: 20101258 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Heating/DHW nominal heat output: 24 kW Quantity of hot water with Δt=25°C: 14 l/min Dimensions (hxwxd) mm 760 x 494 x 240 METHANE power supply Legend: C (heating + sanitary water), A (Open Room) I (electronic ignition, ionisation control). AG Antifreeze as standard down to -15°C WEATHER - ErP Meteo is a complete range of specific boilers for outdoors. The high technological content enhances the specific characteristics to the maximum: dimensions, standard remote control panel, resistance to external agents, innovative performance. The quality of the materials and the innovative design of the shell add elegance to these very small and high performance boilers. Extremely reliable and simple to use, the Meteo range boilers were created specifically for outdoor installations. The unique shell structure, IPX4D electrical protection and materials used for the shell provide maximum protection from external agents. The streamlined, modern aesthetic allows water to roll off. The installation is facilitated by reduced dimensions and supplied equipment. Designed for installations on balconies, Meteo, with a depth of only 24 cm, is the ideal answer to space problems; it is equipped as standard with fittings for connection to the system, gas and sanitary taps and a positioning template. The remote control panel, supplied as standard, allows total control of the boiler from inside the home. The main functions are simple and immediate, with many other user-customizable settings. The remote control panel also functions as a chronothermostat weekly and is set up for climate control via an external probe (optional). Characteristics: CAI boilers, ErP version, equipped with low consumption circulator (EEI0.20) modifiable up to 7 m head MIX combustion (Air/Gas): constant efficiency (mod. CSI) Built with specific materials for outdoor use REC 05 remote control panel as standard ø 60 fume exhaust adapter with standard air intake (mod. CSI) Standard antifreeze up to -15 °C IPX4D electrical protection degree Arrangement for climatic thermoregulation Plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO RESIDENCE 24 KI GAS BOILER - 24 Kw LPG OPEN CHAMBER - ErP Technical features Product code: 20102216 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Domestic hot water/heating nominal heat output: 7.1÷24.0 kW Energy efficiency (92/42/EEC) ** Useful efficiency at Pn* (50°C-30°C): 89.8% Profit return 30% (47th return): 89.5% Open chamber, natural draft. Quantity of hot water at Δt 25°C: 13.7 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 805 x 400 x 332 ; 30 Kgs Power supply: METHANE RESIDENCE Open room Residence is the wall-mounted boiler whose main qualities are simplicity, completeness of functions and small size. Modern and functional design complete with digital display and fitting cover. Residence is available in powers of 24 and 28 kW. Characteristics: CTR system for faster achievement of the desired comfort and a reduction in consumption, the formation of limescale in the boiler and temperature changes in the heating bodies Low consumption circulator (IEE≤0.20) Double exchanger: domestic hot water production with plate exchanger Antifreeze function that protects the heating and DHW circuits down to -3°C Assembly template, hydraulic fittings, power supply cable supplied. The evolution of simplicity The essential design and the elegant lower fitting cover give the product easy harmonization in any room of the house. An advanced technological heart is added to the external simplicity which, thanks to the CTR system, satisfies the comfort inside the home in a short time, allowing lower consumption, less limescale formation in the boiler and less thermal excursions in the radiators. Simplified installation and maintenance Perfect interchangeability with the Riello models installed today and a greater distance of the hydraulic connections from the wall facilitates the connection of Residences even at different center distances. Overall dimensions and weight are reduced, thus facilitating product handling and installation. The new hydraulic unit Residence is equipped with an innovative hydraulic unit in composite material. The frontal arrangement of all its components and the quick connections allow for easy maintenance. Remotely controllable Residence can be connected to a classic room chronothermostat, but for the more demanding user a remote control panel is also available as an option, which collects all the traditional settings and the weekly chronothermostat function in a simple and effective way; if connected to an external probe, it is possible to activate the climatic regulation which autonomously varies the delivery temperature according to the external temperature. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Immergas Open Chamber boiler NIKE ECO 24 Methane low NOx 3.028476 - NEW Heating class C Sanitary Class B XL load profile Maximum nominal heat input kW (kcal/h) 26.6 (22,882) Minimum heat input in DHW kW (kcal/h) 9.6 (8,251) Minimum useful heat output in domestic hot water kW (kcal/h) 8.5 (7,310) NOx class 6 Specific flow rate in continuous domestic hot water service (∆t 30 °C) l/min 11.2 Nominal heating expansion vessel capacity (total) liters 10 (8.0) Electrical protection degree IP X5D NIKE ECO From 26 September 2018, even type B appliances with an open chamber and natural draft must comply with the maximum NOx emission limit of 56 mg/kWh. Precisely to comply with the ErP Directive 2009/125/EC on energy efficiency, Immergas has renewed the range of traditional boilers with the new NIKE and AVIO ECO models. The NIKE is instantaneous and AVIO has an integrated 45 liter storage tank. Both boilers have 24 kW of power, can only run on methane and are ideal for replacing old boilers in the presence of branched collective flues (in fact, they comply with the values ​​required by DI 26/06/15 "Minimum requirements", in case of mere replacement of the generator). With the low-consumption circulator and the ecological burner both as standard, NIKE and AVIO ECO contribute to raising the energy efficiency class in space heating and in the production of domestic hot water. For this they can enjoy the tax deductions currently in force in the event of replacements, for building renovations and interventions aimed at saving energy on existing buildings. The range can also be remote controlled by DOMINUS, the simple and intuitive app that allows you to check the functioning and temperature of the boiler, turn it on and off from anywhere via smartphone or tablet. ECOLOGICAL BURNER Designed to minimize the inflow of secondary air and cooled by the system return water pipe, it ensures high thermal performance, low emissions of carbon monoxide (CO) and nitrogen oxides (NOx). CLASS A CIRCULATOR The low-consumption circulator allows for considerable savings in electricity compared to a traditional circulator and adjusts its performance based on the variations in the hydraulic flow rate of the system, for example in the presence of thermostatic valves or zone valves. LOW ELECTRICITY CONSUMPTION IN STAND-BY (LESS THAN 6 W) EASY TO USE The intuitive control panel allows you to easily set the domestic hot water and heating temperatures. A series of information is displayed on the backlit LCD display, including the operating status of the boiler, the temperatures and any anomalies. ATTACHMENTS UNCHANGED Thanks to the unchanged connections, installation is quick, even when replacing with other similar wall-mounted models in the Immergas range. IPX5D ELECTRICAL INSULATION DEGREE Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

SAUNIER DUVAL MICRA 4 25 GAS AND LPG OPEN CHAMBER BOILER Technical features Energy classification HH (92/42/EEC) with efficiency up to 89.6% (30% of Pn) Continuous domestic hot water (DHW) production up to 14l/min High efficiency and modulating circulator Heating system antifreeze function Heating efficiency class: C Sanitary efficiency class: B Sanitary load profile XL Type: Heating and domestic hot water Domestic hot water production technology: Instantaneous Nominal power PMin/Max heat. 80/60 °C (kW) Heating: 9.5 / 25 Partial load efficiency 30% 40/30 °C (%): 89.6 Min/Max Rated Power (60°C) (kW) 5/25.2 Domestic hot water temperature Min/Max (°C) 35/60 Electric power absorbed Max (W) 88 Dimensions H / W / D (mm) 740 / 410 / 313 Power supply: METHANE or PROPANE MICRA 4 E Instant traditional wall mounted boiler Sanitary comfort High performance Low consumption The traditional boilers of the Micra 4 E range are characterized by a simple and linear design. The range includes a 25 kW combined model. The Micra 4 E range is characterized by a harmonious design and, thanks to its latest generation electronics and high-efficiency plate exchanger, it perfectly combines reduced consumption and all-round domestic comfort. In fact, Micra 4 guarantees a high production of domestic hot water and a constant room temperature by modulating its power according to the outside temperature and the actual request from the room Characteristics Energy classification ** (92/42/EEC) with efficiency up to 89.6% (30% of Pn) The control panel on the boiler, with backlit liquid crystal display and negative contrast, makes adjusting the Micra 4 E extremely easy and immediate: with a few simple gestures it is possible to adjust the temperatures of the heating and domestic hot water, for any need . The small size makes Micra 4 E perfect for replacement in existing systems. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview CHAFFOTEAUX PIGMA 30 CF EU BOILER Cod. 3310441 - NEW ErP 2016: Pigma, wall-mounted open chamber boiler, which thanks to its compact size, sanitary comfort guaranteed by 3 performance stars and digital display technology, manages to create a comfortable environment, suitable for every type of requirement and?Ó?installation. Technical specifications Product code: 3310441 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiencyClass B Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Nominal heat output in heatingÿmax/min:ÿ29.5/ 13ÿkW Useful heating power max/min:ÿ26.7/ 11.2ÿkW Nominal thermal power max/min (sanitary) PCI:ÿ30.5/ 13ÿkW Max/min power in DHW mode:ÿ27.6/ 11.2ÿkW Efficiency at nominal heat input: 90.6% Efficiency 30% of nominal heat input:ÿ89.7% Outlet temperature range min/max temp.:ÿ35-85øC Sanitary comfort performance starsEN13203: *** Capacity of the expansion vessel: 8 lt Maximum system water capacity: 100/300 litres Port. specific in healthcare (10 min. with T= 30øC): 13.5 l/min Hot water flow rate at T 25§ C: 15.8 l/min Maximum absorbed power: 62W Electrical protection degrees: IP X4D Dimensions hxwxd: mmÿ745x400 x307ÿ; 31kg LPG or LPG fuel supply Propan methane conversion kit supplied Features list PIGMA Ebus2 EU Thanks to the compact dimensions, the sanitary comfort guaranteed by the 3 performance stars and the digital display technology that allows optimal management of the heating, Pigma manages to create a comfortable environment, suitable for every type of need and installation Sanitary comforts Sanitary heat exchanger in oversized stainless steel. Domestic hot water performance ***, maximum level not foreseen by the EN 13203 standard. Flow rate from 14.2 to 15.8 l/min with T = 25§C. Controlled DHW production managed by two probes and a sanitary flowmeter for better temperature stability based on the type of withdrawal. Programmable on/off comfort function. Heating comfort 3 star efficiency of combustion in compliance with the EN92/42 standard. SRA function, automatic boiler regulation system according to heating requirements. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Differentiated climatic thermoregulation of 2 circuits, according to the room and/or outside temperature. Arrangement for integration into a heating system via the new Ebus2ÿ communication protocol (boilers, solar, system management modules, modulating thermoregulation accessories). Backlit LCD display with display: history, self-diagnosis, operating temperatures Convenience of installation use Compatible with Expert Control: intuitive system manager for the management of 3 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings. New intuitive electrical connections. Easier start-up: automatic purge function and directly accessible combustion adjustment. Compact and perfectly adaptable to any type of home. Save energy and respect the environment Final 15% energy savings in combination with Expert Controlÿmodulating room probe andÿthe SRA function. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

VAILLANT AtmoTEC PLUS BALKON VMW 240/5-5B LPG OPEN CHAMBER GAS BOILER - ErP Technical features For heating and domestic hot water production Open chamber with natural draft Nominal thermal power in DHW kW 24.0 DHW nominal heat input kW 26.7 ErP energy class (heating and DHW): class C/B Performance stars (according to Dir. 92/42CEE) - ** Domestic hot water production (ΔT = 30K) 11.5 l/min Domestic hot water comfort stars (prEN 13203) - *** Expansion vessel capacity 10 l Dimensions (hxpxl) mm 800 x 338 x 440; 39kg Code: 0010016275/6 Version: CNG or LPG atmoTEC PLUS BALKON Standard wall mounted boiler for heating and domestic hot water Three star comfort hot water DHW pre-heating function Can be installed outdoors, protected up to -10C 10l expansion vessel High efficiency modulating pump. Energy efficiency class up to B depending on the model. For more information, see the technical data sheet The plus range was designed by Vaillant to meet all comfort needs for the production of hot water and for heating. The new atmoTEC plus series with open chamber models with natural draft features the domestic hot water pre-heating function; this function satisfies the customer's needs by reducing production times and immediately provides comfort. With a renewed design and their reduced dimensions, 80 x 44 x 34 cm, they can be placed in any room and easily housed in wall units or cover cabinets. Vaillant does not stop at the design but continues in the development and research of the best performance for the plus series obtaining exceptional results in terms of silence and ease of installation. The Vaillant boilers of the plus series are at the top of performance in terms of efficiency, temperature constancy and reduced maintenance costs, thanks to the high quality of the components. A novelty in response to the ErP regulation is the introduction of a high efficiency pump (class A). Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less