Open Chamber Boiler Ariston HS X 24 CF Low NOx Methane - NEW Energy efficiency class in heating C Energy class in Sanitary B XL load profile Nominal heat input max/min kw 25.8 / 11.0 Useful thermal power max/min kw 23.2 / 9.8 Nominal heat input max/min (sanitary) PCI 27/11.0 kW Hot water flow rate at ΔT 25º C 14.2 l/min Low NOx emissions < 56 mg/kWh Supply voltage 230 V~ (50 Hz) Electrical protection degree IP X4D Dimensions HxWxD 745x400x315 mm New HS X The new Ariston HS-X boiler leaves behind the traditional room thermostat and can work with internal and external temperature probes. Prepared for thermoregulation. These exclusive Ariston thermoregulation peripherals allow for a further 15% gas saving, offering greater stability at room temperature. Ready for use with solar thermal energy in domestic hot water. Digital multifunction display Continuous modulation high efficiency circulator Predisposition for on-off thermoregulation Predisposition solar systems natural circulation Self-diagnosis system by code Mono-temperature zone management Copper finned primary exchanger Double exchanger technology Integrated minimum pressure switch Cold water inlet and heating return filters Low NOx emissions < 56 mg/kWh Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

 ATTENZIONE  IL PRODOTTO È NUOVO E CONTROLLATO DAI NOSTRI TECNICI, PRESENTA DIFETTI DA TRASPORTO: AMMACCATURA ALLA BASE BOZZATURE SUL PANNELLO FRONTALE IMBALLO NON ORIGINALE (PER MAGGIORI DETTAGLI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE). CALDAIA ARISTON modello CARES X 24 CF METANO Low NOx A CAMERA APERTA Codice prodotto: 3301313 Specifiche etichetta energetica secondo direttiva Europea ErP Efficienza energetica riscaldamento Classe C Efficienza energetica sanitario B Profilo di prelievo XL Specifiche tecniche Interna, installazione in canna collettiva ramificata tiraggio naturale Portata termica nominale max/min (riscaldamento) PCI kW 25,8-11,0 Portata termica nominale max/min (sanitario) PCI kW 27-11 Potenza termica utile max/min (riscaldamento) kW 23,2-9,8 Rendimento alla portata termica nominale PCI: 90,1% Rendimento al 30% della portata nominale PCI: 89,9% Temperatura max/min riscaldamento: 82-35°C Temperatura max/min sanitario: 60-36°C Port. specif. in sanit. (10 min. con ΔT=30°C): 11,8 litri/min Quantità di acqua calda (ΔT=25°C): 14,2 l/min Quantità di acqua calda (ΔT=35°C): 10,1 l/min Temperatura ambiente minima di utilizzo: 5°C Tensione/frequenza di alimentazione V/Hz 230-50 Grado di protezione impianto elettrico IP X4D Dimensioni: mm (HxLxP) 745 x 400 x 315 Alimentazione: Metano o GPL Caratteristiche Display multifunzione digitale Circolatore ad alta efficienza a modulazione continua Predisposizione termoregolazione on-off Predisposizione sistemi solari circolazione naturale Sistema di autodiagnosi mediante codice Gestione zone mono-temperatura Scambiatore primario alettato in rame Tecnologia a doppio scambiatore Pressostato di minima integrato Filtri ingresso acqua fredda e ritorno riscaldamento Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

 ATTENZIONE  IL PRODOTTO È NUOVO E FUNZIONANTE, MA PRESENTA UNA LIEVE AMMACCATURA SULLA PARTE POSTERIORE E LATERALE E L'IMBALLO È USURATO. (PER MAGGIORI INFORMAZIONI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE) CALDAIA ARISTON modello CARES X 24 CF METANO Low NOx A CAMERA APERTA - NEW Codice prodotto: 3301313 Specifiche etichetta energetica secondo direttiva Europea ErP Efficienza energetica riscaldamento Classe C Efficienza energetica sanitario B Profilo di prelievo XL Specifiche tecniche Interna, installazione in canna collettiva ramificata tiraggio naturale Portata termica nominale max/min (riscaldamento) PCI kW 25,8-11,0 Portata termica nominale max/min (sanitario) PCI kW 27-11 Potenza termica utile max/min (riscaldamento) kW 23,2-9,8 Rendimento alla portata termica nominale PCI: 90,1% Rendimento al 30% della portata nominale PCI: 89,9% Temperatura max/min riscaldamento: 82-35°C Temperatura max/min sanitario: 60-36°C Port. specif. in sanit. (10 min. con ΔT=30°C): 11,8 litri/min Quantità di acqua calda (ΔT=25°C): 14,2 l/min Quantità di acqua calda (ΔT=35°C): 10,1 l/min Temperatura ambiente minima di utilizzo: 5°C Tensione/frequenza di alimentazione V/Hz 230-50 Grado di protezione impianto elettrico IP X4D Dimensioni: mm (HxLxP) 745 x 400 x 315 Alimentazione: Metano o GPL Caratteristiche Display multifunzione digitale Circolatore ad alta efficienza a modulazione continua Predisposizione termoregolazione on-off Predisposizione sistemi solari circolazione naturale Sistema di autodiagnosi mediante codice Gestione zone mono-temperatura Scambiatore primario alettato in rame Tecnologia a doppio scambiatore Pressostato di minima integrato Filtri ingresso acqua fredda e ritorno riscaldamento Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENZIONE  IL PRODOTTO È NUOVO E CONTROLLATO DAI NOSTRI TECNICI, PRESENTA DIFETTI DA TRASPORTO: BOZZATURE E PICCOLE AMMACCATURE SULLA PARTE ANTERIORE SCOCCHE LATERALI DANNEGGIATE PICCOLA AMMACCATURA SULLA PARTE SUPERIORE IMBALLO USURATO (PER MAGGIORI DETTAGLI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE). Caldaia a Camera Aperta Ariston HS X 24 CF Low NOx Metano. Classe di efficienza energetica in riscaldamento C Classe energetica in Sanitario B Profilo di carico XL Portata termica nominale max/min kw 25,8 / 11,0 Potenza termica utile max/min kw 23,2 / 9,8 Portata termica nominale max/min (sanitario) PCI 27/11,0 kW Portata acqua calda a ΔT 25º C 14,2 l/min Basse emissioni di NOx < 56 mg/kWh Tensione di alimentazione 230 V~ (50 Hz) Grado di protezione elettrico IP X4D Dimensioni AxLxP 745x400x315 mm Nuova HS X La nuova caldaia Ariston HS-X lascia il tradizionale termostato ambiente e può funzionare con sonde di temperatura interne ed esterne. Preparato per la termoregolazione. Queste esclusive periferiche di termoregolazione di Ariston consentono un ulteriore risparmio di gas del 15%, offrendo una maggiore stabilità a temperatura ambiente. Pronta per l'uso con energia solare termica in acqua calda sanitaria. Display multifunzione digitale Circolatore ad alta efficienza a modulazione continua Predisposizione termoregolazione on-off Predisposizione sistemi solari circolazione naturale Sistema di autodiagnosi mediante codice Gestione zone mono-temperatura Scambiatore primario alettato in rame Tecnologia a doppio scambiatore Pressostato di minima integrato Filtri ingresso acqua fredda e ritorno riscaldamento Basse emissioni di NOx < 56 mg/kWh Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Overview ARISTON EGIS PLUS 24 CF EU METHANE BOILER - NEW ErP 2016: Compact wall-mounted boiler with open chamber and natural draft. Technical specifications Product code: 33001807 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitaryware energy efficiencyprofilXL Class B Characteristics of heating/sanitary exercises: For heating and domestic hot waterÿ Open chamber with natural draft Nominal heat input in heatingmax/min kW 25.8/11 Heating max/min heat output (80øC-60øC) kW 23.7/9.9ÿ Efficiency at nominal heat input % 91.9 Efficiency 30% of nominal flowÿ% 91.2 Performance stars (dir. 92/42/EEC) Heating max/min temperatureÿøC 35/ 85ÿ Sanitary max/min temperatureøC 36/60 Specific flow rate in sanitaryware (10 min. with T=30øC) litres/min 11.3 Quantity of hot water T=25øC litres/min 13.6ÿ Quantity of hot water T=35øC litres/min 9.7 Supply voltage/frequency V/Hz 230/50ÿ Degrees of protection for electrical systemsIP X4Dÿ Dimensions (H x W x D) mm 745/400/315ÿ METHANE power supply Features list Egis Plus Conventional compact wall-mounted boiler The wall-mounted boilerÿEgis Plusÿ is the solution for domestic comfort signed by Ariston; it stands out for its installation flexibility, covered hydraulic connections and dimensions. It can be integrated into solar systems and, thanks to the easy front access system, allows extreme maintainability without the need for tools. It is available in the heating and domestic hot water production version: 24 kW (open chamber). Characteristics: Digital multifunction display Continuous modulation high efficiency circulator Predisposition for on-off thermoregulation Predisposition solar systems natural circulation Self-diagnosis system by code Mono-temperature zone management Primary heat exchanger in copper Double exchanger technology Integral minimum pressure switch Cold water inlet filters and heating return High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the system temperature, guaranteeing boiler performance and reducing electricity consumption. Optimizing thermal efficiency.ÿ Optimization of comfort with constant temperature.ÿ Maximum silence. Ecodesign Directive: In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

ARISTON CLAS EVO 28 CF EU BOILER Product code: 3300732 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: For heating and domestic hot water production Open chamber with natural draft Nominal heat input in heating max/min kW 29.5/13.0 Max/min heating thermal power (80°C-60°C) kW 26.7/11.2 Efficiency at nominal heat input % 90.6 Efficiency at 30% of nominal flow % 89.7 Performance stars (dir. 92/42/EEC) ★★★ Heating max/min temperature °C 35/ 85 Max/min domestic hot water temperature°C 36/60 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 13.5 Quantity of hot water ∆T=25°C litres/min 15.8 Quantity of hot water ∆T=35°C litres/min 11.3 Supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 62 Degrees of protection of the electrical system IP X4D Dimensions (H x W x D) mm 770/400/315 METHANE power supply Evo class Conventional compact wall-mounted boiler with auto function The Clas Evo wall-mounted boiler is Ariston's solution for domestic comfort; it stands out for its innovative and captivating design and for its small size that makes it suitable for any type of furniture. It is available in the heating and domestic hot water production version in 2 powers: 24 and 28 kW (open chamber) Characteristics: Backlit multifunction LCD screen Continuous modulation high efficiency circulator Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Aluminum finned primary exchanger Arrangement for integration with system configuration through the new Bus Bridgnet® communication protocol Cold water inlet and heating return filters Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less