ATTENTION THIS PRODUCT IS MADE TO ORDER. WILL BE SHIPPED WITHIN 10 DAYS OF PURCHASE DATE Cadaia Beretta Open Chamber Meteo 24 cai LX Low NOx with Standard BeSmart cod. 20152461 Methane - New Heating/sanitary nominal heat input Kw 26.7 Heating/DHW nominal heat output kW 24.06 Heating reduced heat input kW 10.7 Heating reduced thermal power kW 9.33 DHW reduced heat input kW 9 DHW reduced thermal power kW 7.85 Useful efficiency Pn max - Pn min (80°-60°) % 90.1 - 87.2 Profitability 30% (50th return) % 89.5 Combustion efficiency % 91.6 Total electric power W 87 Circulator electric power (1,000 l/h) W 39 Category II2H3P Destination country IT Supply voltage V - Hz 230 - 50 IP X5D degree of protection Chimney losses with burner off - on % 0.37 - 8.40 Warm-up exercise Maximum pressure bar 3 Minimum pressure for operation 0.25 - 0.45 bar Maximum temperature 90 °C Heating water temperature selection range °C 40 - 80 Membrane expansion vessel l 8 Expansion vessel preload bar 1 Sanitary exercise Maximum pressure 6 bar Minimum pressure bar 0.15 Quantity of hot water at ?t 25° C l/min 13.8 Minimum domestic water flow rate l/min 2 Domestic hot water temperature selection range °C 37 - 60 Flow regulator l/min 10 Gas pressure Natural gas nominal pressure (G20) mbar 20 LPG (G31) liquid gas nominal pressure mbar 37 Hydraulic connections Heating inlet - outlet Ø 3/4” DHW inlet - outlet Ø 1/2” Gas inlet Ø 3/4” Boiler dimensions Height mm 760 Height with coverage 886 Width 494mm Depth 243mm Weight kg 34 LX WEATHER New boilers with Low NOx emissions Low consumption circulator (EEI≤0.20) modifiable up to 7 m head Built with specific materials for outdoor use BeSMART remote control panel as standard Standard antifreeze up to -15 °C IPX4D electrical protection degree Arrangement for climatic thermoregulation Plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available In case of unavailability, the new DIVATECH D LNC 24 model will be supplied Technical features Model : Divaproject C24 Power supply: LPG Performance Energy efficiency class in heating: C DHW energy efficiency class: A Heating nominal heat output : 7.0 ~ 23.5 kW Heat output : 8.3 ~ 25.8 kW Domestic useful thermal power: 23.5 kW Efficiency : 91 % Maximum production of domestic hot water Δt 25°C : 13.4 l/min Maximum production of domestic hot water Δt 30°C : 11.2 l/min Dimensions and weight Dimensions (HxWxD): 700x400x330 mm Empty weight: 27.0 kg Ferroli Divaproject Boiler Wall mounted boilers with instantaneous DHW production with double exchanger, open chamber, natural draft The Divaproject c24 by Ferroli is the cheapest solution for replacing open chamber boilers. Built to be installed outdoors in partially protected places and prepared for integration with a solar panel system. It has an excellent value for money and is entirely Made in Italy with a 2-year guarantee . The cheapest in its category Arrangement for solar systems Eco-comfort system for rapid domestic hot water production High efficiency low consumption circulator (class A) Ideal for residential homes up to 120 m2 2 Year Warranty Divaproject is a heat generator for heating and instant domestic hot water production. The series has been designed in each of its components to have top performance in its category while maintaining characteristics of simplicity and compactness. The control electronics allow for easy and functional combination with solar collector systems. The series includes two models: C24 and C30 The boiler is designed to operate on natural gas and LPG or even on propane air by means of a special transformation. The efficiency of Divaproject is the maximum for its category, certified at 3 stars according to the 92/42 EEC Directive for energy classification Components Expansion tank Combustion chamber Copper primary exchanger Atmospheric burner Sanitary exchanger Modulating gas valve Motorized 3-way valve Boiler control Control panel and functions Divaproject's control and management electronics allow the user to customize the operation of the appliance in order to manage environmental comfort according to one's needs. The control panel with the adjustment knobs makes the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive Remote control "ROMEO" timer Divaproject boilers can be combined with a wide range of remote timer controls which allow the appliance to be adjusted and operated remotely. The ROMEO series consists of 4 models, respectively with weekly or daily comfort programming and with the possibility of choosing between wired or wireless connection for both With ROMEO you can: Adjust the heating and DHW temperatures Know the operating status of the boiler View the temperatures inside and outside the house Restart the boiler in case of temporary lockout Program the daily or weekly environmental comfort Activate/deactivate the heating function via the telephone The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings. With solar systems Sun Easy function Divaproject boilers have been designed to be easily inserted in systems made with the most recent technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously controls the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user Comfort and Safety Functions Eco-Comfort function In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Antifreeze function Even in stand-by mode, i.e. in the absence of a heat request, if a water temperature of 5°C is detected, it activates the anti-freeze protection by igniting the burner at minimum power, in order to avoid damage due to freezing. Post-circulation device All models are equipped with this particular timed device which allows, after the burner has been switched off in heating mode, to recover all the heat accumulated due to thermal inertia from the exchanger, transferring it to the radiators and therefore to the rooms to be heated Circulation anti-blocking device After 24 hours of inactivity, the boiler circulator is automatically started for about 5 seconds to prevent it from blocking after a long period of inactivity. Strengths > Compact geometry primary heat exchanger entirely in copper > Instant production of domestic hot water with dedicated plate exchanger > Simple and complete control panel, LED user interface > High efficiency low consumption circulator (ErP - Class A) with anti-blocking system > Combustion chamber in anti-corrosion aluminized sheet, internally insulated with ecological fiber and burner in AISI 304 stainless steel > Can be combined with the modulating remote timer control > Casing painted white by anaphoresis with epoxy powders > Compact dimensions and low weight > Modulating heat input both in heating and in DHW production, managed by an electronic microprocessor board > Adjustable post-circulation after the heating phase > ECO/COMFORT system for rapid production of domestic hot water > Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems > Standard by-pass Product Warranty : The warranty on this item is 24 months from the date of purchase.

Read more less

Immergas Open Chamber boiler NIKE STAR 24 G20 LPG - NEW Nominal useful power kW 23.6 Dimensions (HxWxD) mm 781 x 440 x 240 Instant type Modulation range 40 - 100% Hot water production (∆t 30°C) l/min 11.1 NIKE STAR G20 New design. User interface with buttons and display. Internal installation. IPX4D degree of protection. Optional connection group (with positions and gas/water center distances on the wall unchanged compared to previous versions). Standard lower casing (to cover the connection pipes). Modulating circulator with low electricity consumption, with settings directly on the pump (no PWM). Conventional, instantaneous wall-mounted boiler. Extremely compact, it is ideal for replacing old boilers in the presence of branched collective flues. Low consumption Quick delivery of hot water Maximum compactness: only 24 cm deep. Ideal for replacement: in the presence of existing branched collective rods. IPX4D electrical protection. Standard antifreeze down to -5 °C. Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Mini Nike 24 Product code : 3.025589 Maximum nominal heat input: 26.2 kW Minimum nominal heat input in DHW: 8.3 kW Minimum nominal heat input in heating mode: 10.9 kW Maximum useful thermal power: 23.8 kW Minimum useful thermal power in DHW: 8.1 kW Minimum useful thermal power in heating: 9.4 kW Useful thermal efficiency at 100% Pn (80/60 °C) : 91% Useful thermal efficiency at 30% of the nominal load. (80/60°C) : 88% Minimum gas flow rate to the burner: 0.88 m 3 /h Maximum gas flow rate to the burner: 2.77 m 3 /h Weighted CO : 27 mg/kWh Weighted NO X : 150 mg/kWh Specific flow rate in continuous domestic hot water service (∆t 30 °C): 11.4 l/min DHW circuit minimum dynamic pressure: 0.3 bar Nominal heating expansion vessel capacity: 6.0 litres Electrical protection degree : IPX4D Dimensions and weight Dimensions (HxWxD): 785x440x240 mm Empty weight: 26.1 kg Immergas Mini Nike Instant compact mural with natural draft Practicality and flexibility of installation A key feature of the range are the attachments which are unchanged from the previous MINI series. This peculiarity guarantees maximum ease of installation even during replacement. In addition, the compact size and low weight ensure convenience and ease of installation Solar function The boiler is designed to receive pre-heated water from a solar storage tank. By activating this function in the boiler parameters, the burner switches on only if it is necessary to integrate the heating of the water coming from the solar tank Ease of adjustment The newly designed dashboard, with backlit display, allows easy and intuitive use of the boiler. The self-diagnosis system displays the operating status of the boiler, further simplifying maintenance of the appliance by qualified technicians Ideal for connection to existing branched collective smoking pipes MINI NIKE 24 ErP complies with the thermal efficiency value (at 30% of the load) provided for by Article 4, paragraph 7 of Presidential Decree 59/09 for cases of mere replacement of the boiler, with connection to branched collective flues (ccr) Reduced electricity consumption In compliance with the new ErP directive, the boiler is equipped with a low energy consumption circulator Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SAVIO ACTA GAS BOILER AND 24 A* METHANE OPEN CHAMBER Model: ACTA 24A Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary Energy Efficiency Class B Withdrawal profile: XL Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 26.6 kW Heating/DHW maximum useful power: 24.1 kW Yield name 60°/80°C: 90.6% Yield at 30% load: 89.6% Energy efficiency stars: (dir 92/42/EEC) ** NOx class n° 3 Weighted NOx: 135 mg/kWh Minimum/maximum heating temperature: 38/85 °C Minimum/maximum heating pressure: 0.3/3.0 bar Capacity of the expansion tank (total): 8lt DHW minimum/maximum temperature: 35/60°C Maximum flow rate (ΔT=25K) / (ΔT=35K): 13.8/9.9 l/min Specific sanitary flow rate (ΔT=30 K): 11.5 l/min Voltage / Power at nominal heat input V~/ W 230~/56 Degree of protection n° IPX4D Minimum/maximum smoke temperature: 83/108°C Extremely compact dimensions hxwxd: mm 703x400x325 ; 28.7kg CNG or LPG power supply ACTA ACTA is the range of Savio boilers designed to meet modern housing needs that require reliable, compact and high performance products. The ACTA range includes open chamber boilers with powers of 24 kW and 28 kW. The ACTA series is suitable for heating and domestic hot water production. ACTA has very compact dimensions which make it easy to place in any environment. Characteristics: High yields Primary heat exchanger in copper, high circulation lamellar Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Integration with SAVIO solar systems using a solar kit Digital control panel with display. The electronic card allows you to: - Adjust the ignition pressure - Adjust the restart frequency - Manage the post-circulation of the high efficiency pump - View fault diagnostics and lockout status. Also available: - Boiler antifreeze safety - Disposal of primary circuit thermal inertia. Primary exchanger ACTA is a high efficiency boiler: the most compact exchanger, with reduced fin pitch to increase their number and ensure maximum efficiency. The large heat exchange surface is guaranteed by the helical section of the passage pipes and by the lamellar structure. The high exchange efficiency is guaranteed by the double circulation in counter flow. The exchanger is made of copper with a protective coating resistant to high temperatures. Secondary exchanger ACTA is available in a mixed version for heating and domestic hot water production: the hot water is supplied at an adjustable and constant temperature thanks to the electronic modulation of the boiler. The DHW exchanger is made of stainless steel and has a low inertia which guarantees excellent performance. Control panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display Display annual periodic maintenance expiry Thermo-hydrometer for reading the water pressure on the primary side. Integration with solar ACTA can be easily combined with a solar system using the Biasi solar kit. Simple and immediate to install, it does not require electrical parts and allows optimizing the integration of the solar system with the boiler which intervenes only when necessary to guarantee the required comfort temperature. Reliability and security Hydraulic groups of innovative conception: Motorized 3-way valve Integrated automatic by-pass: allows the boiler to adapt to the needs of modern heating systems Absolute heating pressure switch: guarantees protection of the boiler in the event of a lack of water or circulation Sanitary flowmeter Easily accessible filling tap Drain tap Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SAVIO ACTA GAS BOILER AND 24 A* METHANE OPEN CHAMBER Model: ACTA 24A Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary Energy Efficiency Class B Withdrawal profile: XL Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 26.6 kW Heating/DHW maximum useful power: 24.1 kW Yield name 60°/80°C: 90.6% Yield at 30% load: 89.6% Energy efficiency stars: (dir 92/42/EEC) ** NOx class n° 3 Weighted NOx: 135 mg/kWh Minimum/maximum heating temperature: 38/85 °C Minimum/maximum heating pressure: 0.3/3.0 bar Capacity of the expansion tank (total): 8lt DHW minimum/maximum temperature: 35/60°C Maximum flow rate (ΔT=25K) / (ΔT=35K): 13.8/9.9 l/min Specific sanitary flow rate (ΔT=30 K): 11.5 l/min Voltage / Power at nominal heat input V~/ W 230~/56 Degree of protection n° IPX4D Minimum/maximum smoke temperature: 83/108°C Extremely compact dimensions hxwxd: mm 703x400x325 ; 28.7kg CNG or LPG power supply ACTA ACTA is the range of Savio boilers designed to meet modern housing needs that require reliable, compact and high performance products. The ACTA NEW range includes open chamber boilers with powers of 24 kW and 28 kW. The ACTA series is suitable for heating and domestic hot water production. ACTA has very compact dimensions which make it easy to place in any environment. Characteristics: High yields Primary heat exchanger in copper, high circulation lamellar Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Integration with SAVIO solar systems using a solar kit Digital control panel with display. The electronic card allows you to: - Adjust the ignition pressure - Adjust the restart frequency - Manage the post-circulation of the high efficiency pump - View fault diagnostics and lockout status. Also available: - Boiler antifreeze safety - Disposal of primary circuit thermal inertia. Primary exchanger ACTA is a high efficiency boiler: the most compact exchanger, with reduced fin pitch to increase their number and ensure maximum efficiency. The large heat exchange surface is guaranteed by the helical section of the passage pipes and by the lamellar structure. The high exchange efficiency is guaranteed by the double circulation in counter flow. The exchanger is made of copper with a protective coating resistant to high temperatures. Secondary exchanger ACTA is available in a mixed version for heating and domestic hot water production: the hot water is supplied at an adjustable and constant temperature thanks to the electronic modulation of the boiler. The DHW exchanger is made of stainless steel and has a low inertia which guarantees excellent performance. Control panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display Display annual periodic maintenance expiry Thermo-hydrometer for reading the water pressure on the primary side. Integration with solar ACTA can be easily combined with a solar system using the Biasi solar kit. Simple and immediate to install, it does not require electrical parts and allows optimizing the integration of the solar system with the boiler which intervenes only when necessary to guarantee the required comfort temperature. Reliability and security Hydraulic groups of innovative conception: Motorized 3-way valve Integrated automatic by-pass: allows the boiler to adapt to the needs of modern heating systems Absolute heating pressure switch: guarantees protection of the boiler in the event of a lack of water or circulation Sanitary flowmeter Easily accessible filling tap Drain tap Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : atmoTEC Plus VMW 240/5-5 Product code : 0010016273 Power supply: methane Performance Nominal thermal power in sanitary mode: 24.0 DHW nominal heat input kW 26.7 Energy efficiency class in heating: C Sanitary energy efficiency class: B Sanitary load profile : XL NOx class : 3 Performance stars : ★★ Domestic hot water production (ΔT = 30K) 11.5 l/min Domestic hot water comfort stars : ★★★ Expansion vessel capacity: 10 litres Fumes discharge temperature : 84° ~ 117°C Sound power : 49.5 dB(A) Dimensions and weight Dimensions (HxWxD): 800x338x440 mm Weight : 40.0 Kg Open flue boiler Vaillant atmoTEC Plus Standard wall mounted boiler for heating and domestic hot water Three star comfort hot water DHW pre-heating function Can be installed outdoors, protected up to -10C 10l expansion vessel High efficiency modulating pump. Energy efficiency class up to B depending on the model. For more information, see the technical data sheet The plus range was designed by Vaillant to meet all comfort needs for the production of hot water and for heating. The new atmoTEC plus series with open chamber models with natural draft features the domestic hot water pre-heating function; this function satisfies the customer's needs by reducing production times and immediately provides comfort. With a renewed design and their reduced dimensions, 80 x 44 x 34 cm, they can be placed in any room and easily housed in wall units or cover cabinets. Vaillant does not stop at the design but continues in the development and research of the best performance for the plus series obtaining exceptional results in terms of silence and ease of installation. Vaillant plus series boilers are at the top of performance in terms of efficiency, temperature constancy and low maintenance costs, thanks to the high quality of the components. A novelty in response to the ErP regulation is the introduction of a high efficiency pump (class A). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

FONDITAL FORMENTERA CTN 24 METHANE OPEN CHAMBER GAS BOILER. Characteristics of heating/DHW operation: Open chamber with natural draft Nominal heat output: 23 kW Efficiency at maximum power: 90.6% Efficiency at 30% load: 89.4% Classification according to 92/42/EEC: ** NOx class (EN 297/EN 483); 2 Min-max sanitary pressure: 0.5 - 6 bar Heating temperature adjustment °C 35-78 Expansion vessel capacity: 7 l DHW production ∆t 30°C: 11.2 l/min Total absorbed electric power: 57 W Degree of protection of the electrical panel: IPX5D Dimensions (hxlxp) 420x750x315 mm; 36kg METHANE power supply Warranty: 2 years FORMENTERA CTN Formentera CTN is a wall-hung instantaneous combined gas boiler with open chamber and natural draft. The gas boiler is equipped with a touch screen user interface and is set up to be powered by methane or LPG. Plus Touch screen user interface Boiler room temperature adjustment with external probe Sanitary heat exchanger with 26 plates Standard management of three types of solar thermal system Boiler change kit: Characteristics: High efficiency circulator with built-in deaerator Standard management of 3 types of solar thermal system Monothermal primary heat exchanger Sanitary heat exchanger with 26 stainless steel plates Integrated hydraulic unit including automatic by-pass, safety valve, pressure transducer, drain cock and connection to the expansion vessel Integrated electronic board for safety and flame modulation Sliding temperature operation with external probe (optional) Management of high and low temperature heating zones, via electronic board (optional) Efficiency classification according to 92/42/EEC: ★★ Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS NEW AND WORKING BUT IT HAS A SIDE DENT, A SMALL DAMAGE NEAR THE DISPLAY AND THE PACKAGING IS WORN. (FOR MORE INFORMATION SEE PHOTO NEXT TO THE MAIN IMAGE) Open Chamber Boiler Beretta CIAO LX 24 CAI Low NOx Methane 20151648 - NEW Technical Features Model: CIAO LX 24 CAI Code: 20151648 Nominal heating/sanitary thermal capacity: 26.70 kW Nominal heating/sanitary thermal power: 24.06 kW Efficiency at rated power: 90.1 Efficiency at reduced load (30%): 89.2% NOx class 6 Maximum operating pressure heating bar 3 Maximum absorbed electrical power W 47 Quantity of hot water deltaT 25C° 13.8 l/min Dimensions HxWxD 740x400x340 HELLO LX Beretta has renewed the Ciao open chamber boiler; the previous Ciao S CAI model now becomes Ciao LX CAI and is in NOX Class 6. Aesthetically it looks like the previous one but its technology is now completely different. The Ciao LX CAI is the entry-level model for approaching Beretta boiler technology; the CAI model has an open combustion chamber and natural draft. The adjectives that identify it are: high quality standard, robustness, reliability and economy in purchase and operation. The innovative Double Exchanger is very compact and is of the plate type with the possibility of pre-heating . It also uses a low consumption Synchronous Circulator (EEI = 0.20) with anti-blocking cycle system and 3-way valve; it is equipped with a smoke control thermostat and by-pass on the heating circuit. Beretta Ciao has a simple, modern and elegant line; the front panel, the real brain of the boiler, is equipped with many functions. Ciao LX CAI is designed to be installed outdoors in partially protected places, thanks to the dedicated accessories and the anti-freeze protection on the board up to 0 °C. In colder temperature conditions, it is possible to extend the protection up to -10 °C using the specific anti-freeze resistance kit together with the siphon anti-freeze resistance kit (optional, to be requested separately from the Beretta Technical Assistance Centre). A convenient digital liquid crystal display for viewing the temperature and diagnostic codes, the on/off/summer/winter/reset/heating temperature/ Amico Climate System activation selector, the domestic hot water temperature/pre-heating activation selector, the Hydrometer. The wall-mounted hydraulic fittings, the sanitary taps and the gas tap are not included in the package. GUARANTEED SAVINGS AND HIGH COMFORT Gas consumption is always very low . This new version complies with the new standards on exhaust gas emissions (NOx 6) and the ErP Directive 2015 ; the boiler benefits from Energy Classes C in Heating and B in Sanitary . Everything is born in the name of savings, starting from the purchase price up to the management of consumption. Maximum comfort with minimum expense. TECHNICAL FEATURES Class B/C NOx class 6 - ErP version, equipped with 6 m low consumption circulator Double exchanger: primary and sanitary plate with pre-heating option 8 litre expansion vessel Provision for climate control (optional external probe to be purchased through CAT) Electrical protection degree IPX5D Hydraulic fittings, gas taps and optional sanitary fittings 3-way valve with anti-lock cycle system Smoke control thermostat By-pass on the heating circuit Electronic board with self-diagnostic function and anti-freeze protection Simple and intuitive digital display On/off/summer/winter/reset/heating temperature/Climate Friend System activation selector Domestic hot water temperature selector/preheating activation Hydrometer Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

 ATTENZIONE  IL PRODOTTO È NUOVO E FUNZIONANTE, MA PRESENTA UN' AMMACCATURA SULLA PARTE LATERALE E L'IMBALLO È USURATO. (PER MAGGIORI INFORMAZIONI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE) CALDAIA ARISTON modello CARES X 24 CF METANO Low NOx A CAMERA APERTA - NEW Codice prodotto: 3301313 Specifiche etichetta energetica secondo direttiva Europea ErP Efficienza energetica riscaldamento Classe C Efficienza energetica sanitario B Profilo di prelievo XL Specifiche tecniche Interna, installazione in canna collettiva ramificata tiraggio naturale Portata termica nominale max/min (riscaldamento) PCI kW 25,8-11,0 Portata termica nominale max/min (sanitario) PCI kW 27-11 Potenza termica utile max/min (riscaldamento) kW 23,2-9,8 Rendimento alla portata termica nominale PCI: 90,1% Rendimento al 30% della portata nominale PCI: 89,9% Temperatura max/min riscaldamento: 82-35°C Temperatura max/min sanitario: 60-36°C Port. specif. in sanit. (10 min. con ΔT=30°C): 11,8 litri/min Quantità di acqua calda (ΔT=25°C): 14,2 l/min Quantità di acqua calda (ΔT=35°C): 10,1 l/min Temperatura ambiente minima di utilizzo: 5°C Tensione/frequenza di alimentazione V/Hz 230-50 Grado di protezione impianto elettrico IP X4D Dimensioni: mm (HxLxP) 745 x 400 x 315 Alimentazione: Metano o GPL Caratteristiche Display multifunzione digitale Circolatore ad alta efficienza a modulazione continua Predisposizione termoregolazione on-off Predisposizione sistemi solari circolazione naturale Sistema di autodiagnosi mediante codice Gestione zone mono-temperatura Scambiatore primario alettato in rame Tecnologia a doppio scambiatore Pressostato di minima integrato Filtri ingresso acqua fredda e ritorno riscaldamento Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE MA PRESENTA AMMACCATURE E BOZZATURE SULLA PARTE FRONTALE E LATERALE, LEGGERA AMMACCATURA AL SUPPORTO DEL SERBATOIO E L'IMBALLO È USURATO. (PER MAGGIORI INFORMAZIONI SUI DANNEGGIAMENTI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE) Caratteristiche tecniche Modello : Maior Nike 24 Codice prodotto : 3.025591GPL Alimentazione : Gpl Efficienza energetica Classe energetica in riscaldamento : C Classe energetica sanitario : B Profilo di carico : XL Prestazioni in riscaldamento Portata termica nominale max (kcal/h) 25,9 (22.307) kW Portata termica nominale min. in riscaldamento (kcal/h) 10,7 (9.185) kW Potenza termica utile (min./max) (kcal/h) 9.4/23,5 (8.084/20.210) kW Prestazioni sanitario Portata termica nominale min. in sanitario (kcal/h) 8,1 (6.928) kW Potenza termica utile min. in sanitario (kcal/h) 7,0 (6.020) Capacità vaso d’espansione in riscaldamento nominale 10,0 (8,0) litri Grado di protezione elettrica IP X4D Dimensioni e peso Dimensioni (HxLxP) : 785x440x340 mm Peso : 33,4 Kg Caldaia Maior Nike La caldaia MAIOR NIKE è intuitiva e semplice da usare e da programmare a proprio piacimento grazie anche alle pratiche manopole ed un display LCD retroilluminato che permettono la gestione e la visualizzazione delle impostazioni della caldaia. Infine la si data la sua grande affidabilità non solo in prestazioni ma anche in resistenza ( grado di protezione IPX4D) è installabile sia per interno che per esterno parzialmente coperto. Progettata per rispondere a tutte l'esigenze dei propri clienti la caldaia Immergas meior Nike rispetta l'ambiente (ErP), è stata programmata oltre a garantire le funzioni che preservano l’integrità del generatore nel tempo,ha anche la funzione per gestire i sistemi ad impianto solare, capace di ritardare l’accensione per ottimizzare la lettura dell’acqua in ingresso proveniente dal bollitore solare. Tale funzione risulta ancora piu performante con l’ausilio del kit sonda ingresso sanitario. Infine per facilitare l'istallazione è composta da attacchi invariati per far si che in fase di sostituzione con altri modelli pensili istantanei della gamma Immergas.   Garanzia prodotto : La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

 ATTENZIONE  IL PRODOTTO È NUOVO E FUNZIONANTE, MA PRESENTA UN'AMMACCATURA SUL LATO DESTRO, UNA BOZZATURA SUL LATO SINISTRO, SULLA PARTE POSTERIORE È PRESENTE UNA VITE NON DI SERIE E L'IMBALLO È USURATO. (PER MAGGIORI INFORMAZIONI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE) CALDAIA ARISTON modello CARES X 24 CF METANO Low NOx A CAMERA APERTA - NEW Codice prodotto: 3301313 Specifiche etichetta energetica secondo direttiva Europea ErP Efficienza energetica riscaldamento Classe C Efficienza energetica sanitario B Profilo di prelievo XL Specifiche tecniche Interna, installazione in canna collettiva ramificata tiraggio naturale Portata termica nominale max/min (riscaldamento) PCI kW 25,8-11,0 Portata termica nominale max/min (sanitario) PCI kW 27-11 Potenza termica utile max/min (riscaldamento) kW 23,2-9,8 Rendimento alla portata termica nominale PCI: 90,1% Rendimento al 30% della portata nominale PCI: 89,9% Temperatura max/min riscaldamento: 82-35°C Temperatura max/min sanitario: 60-36°C Port. specif. in sanit. (10 min. con ΔT=30°C): 11,8 litri/min Quantità di acqua calda (ΔT=25°C): 14,2 l/min Quantità di acqua calda (ΔT=35°C): 10,1 l/min Temperatura ambiente minima di utilizzo: 5°C Tensione/frequenza di alimentazione V/Hz 230-50 Grado di protezione impianto elettrico IP X4D Dimensioni: mm (HxLxP) 745 x 400 x 315 Alimentazione: Metano o GPL Caratteristiche Display multifunzione digitale Circolatore ad alta efficienza a modulazione continua Predisposizione termoregolazione on-off Predisposizione sistemi solari circolazione naturale Sistema di autodiagnosi mediante codice Gestione zone mono-temperatura Scambiatore primario alettato in rame Tecnologia a doppio scambiatore Pressostato di minima integrato Filtri ingresso acqua fredda e ritorno riscaldamento Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less