Search results for "Piscine"

AquaSweeper di Bestway è un pulitore automatico per le piscine fuori terra tra i più comodi della linea Flowclear, capace di offrire una soluzione semplice ma efficace per la cura dalla propria piscina.Il design brevettato dell'aspiratore AquaSweeper vi consente di mantenere l'acqua sempre pulita e cristallina per tutta la stagione e di alleggerire il sistema di filtraggio della piscina. L'aspiratore è composto da un pre-filtro integrato che raccoglie detriti, foglie e sabbia accumulati sul fondo della vasca prima che essi raggiungano il filtro principale, in modo da prolungare la sua durata ed evitarne l'ostruzione. Il sistema a clip posizionato sulla parte inferiore dell'aspiratore vi consente in ogni modo di aprire e rimuovere il vano contenitore con molta facilità provvedendo alla sua pulizia. Oltre questi dettagli, l'aspiratore è provvisto di un galleggiante che assieme la zavorra sull'estremità garantisce una maggiore manovrabilità in acqua e un più facile scorrimento sul fondale e sulle pareti della vasca. L'aspiratore AcquaSweeper è molto facile da utilizzare, per avviare il sistema vi basterà semplicemente collegarla alla pompa del filtro della vostra piscina. Il regolatore di pressione vi aiuterà a controllare il flusso dell'acqua immessa e potrete così utilizzarlo anche nel caso in cui disponete di una pompa per il filtro ad alta potenza. L'aspirazione avviene in modo rapido e silenzioso e sarete costantemente supportati dal tubo flessibile lungo 7,5 metri che vi permetterà di raggiungere i punti più lontani della vasca. I connettori inclusi nella confezione rendono inoltre l'aspiratore compatibile con tutte le piscine della collezione Bestway persino con le piscine a struttura morbida. L'aspiratore AquaSweeper è uno dei tanti accessori per piscine della linea Flowclear progettati per rendere la pulizia e la manutenzione della vostra piscina fuori terra il più semplice e conveniente possibile. La gamma comprende anche depuratori d'acqua, scalette per piscina, pompe di filtraggio ed altri elementi essenziali per le piscine fuori terra. Caratteristiche tecniche Design brevettato specifico per piscine fuori terra con pompe a filtro a partire da 3,785L/hr o con filtri a sabbia da 3,028L/hr Consigliato anche per piscine fuori terra morbide (6,7m) Aspirazione regolabile per prestazioni superiori Pulizia silenziosa e rapida del fondo piscina Tubo flessibile 7,5m Aspiratore con pre-filtro, galleggiante e zavorra per una manovrabilità ottimale Connettori per diverse tipologie di piscine Bestway

Read more less

Technical features Model : CM 3-5 Voltage : 1 x 220-240V Flow rate : 4 m3 / h Head : 20.6 m Power : 0.50kW / 0.75kW Suction : Rp 1" Send : Rp 1" Sound power level : 53 dB(A) Grundfos CM-A The two main features of the horizontal multistage CM pump are compactness and modularity, which make different configurations possible. The pump is mainly composed of a series of interchangeable modules, designed to work together for a long time, regardless of the application. CM pumps are equipped with mains powered motors. The CM pump is mainly used as an integrated pump in OEM solutions and in household compressors. It is compact, silent, reliable and flexible and all this makes it an optimal solution for installation and interaction with other components in large systems. It can be installed in systems or used as an independent pump. GRUNDFOS MULTISTAGE SINGLE-PHASE CENTRIFUGAL PUMP SERIES CM3-3 CM is the Grundfos centrifugal electric pump series. Excellent for a wide range of applications, it stands out for its excellent technical characteristics and ease of use. GREAT INSTALLATION AND USE MODULARITY The peculiar feature of the Grundfos CM electric pump is the quality of the components. The shaft, impellers and chambers are in stainless steel, the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The thread is of the Whitworth RP type. The engine is air cooled. The electric pump is equipped with thermal protection with automatic reset for any faults caused by both slow and rapid increases in temperature (constant overload and stall conditions). It is capable of withstanding dry running for short periods. The compact dimensions and the lowered base allow it to be installed even where space is limited. APPLICATIONS The Grundfos centrifugal CM is an electric pump ideal for pressurizing and moving liquids on the surface. There are many applications: washing systems of all kinds, withdrawal from tanks, domestic supply, pressurisation, irrigation, swimming pools, fountains, etc. GUARANTEED SAVINGS AND HIGH COMFORT Grundfos motors are characterized by their high efficiency in relation to low electrical consumption. The savings also materialize in the duration over time due to the high construction quality and the materials used. The shaft, the impellers and the chambers are in stainless steel, the pump body with the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The engine is air cooled. The remarkable reactivity to the demand for water and the silent operation contribute considerably to the efficiency of the product and to the comfort produced both in domestic and professional uses. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase

Read more less

Technical Features Model : UNILIFT CC 7 A1 Mouth size ; G 1 1/4 Power : 0.38 kW / 0.51 HP Intensity: 1.80 A Cable: 10m UNILIFT CC The Unilift CC pump is a single stage submersible drainage pump designed for pumping drainage water and grey waste water. The Unilift CC pump can take water up to a level of 3 mm above the floor, removing the filter. The Unilift CC pump is suitable for permanent and temporary installations. The Unilift CC pump is equipped with a flap check valve on the discharge port to prevent backflow from the pipework. An adapter ensures the correct connections to 3/4" or 1 1/4" discharge ports. The filter is made of stainless steel while the main parts of the pump, such as the body and housing, are made of molded composite materials. The Multibox B-CC7 is a Unilift CC pump combined with additional elements such as a hose with Storz coupling, adapter for threaded Storz coupling and a box with perforated mesh sides to be used as a pre-filter for the pump. It is the perfect solution to use as an emergency kit for single-family homes in the event of flooding. Applications The Unilift CC pump is designed for the following pumping applications: Water and rainwater in agriculture Water from rivers and lakes Rainwater and drainage Water for filling/emptying tanks, ponds, cans, etc. Effluents from showers, car washes and wells below the level of the sewer system Pool water Ditch drainage water Groundwater (lowering applications) Effluents from viaducts, underpasses, etc. Drainage water from splinker systems in garages. Features and Benefits Composite materials Stainless steel filter Automatic air vent valve on the handle Available with level switch Suitable for low suction levels Compact shape for easy movement and cleaning Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 12 months from the date of purchase

Read more less

Technical features Model : CM 3-3 Voltage : 1 x 220-240V Flow rate: 3.1 m3 / h Head : 20.6 m Power : 0.50kW / 0.67kW Suction : Rp 1" Send : Rp 1" Sound power level : 53 dB(A) Dimensions Height : 20.8cm Length : 30.4cm Width : 14.1cm Weight : 12.00 Kg Grundfos CM-A The two main features of the horizontal multistage CM pump are compactness and modularity, which make different configurations possible. The pump is mainly composed of a series of interchangeable modules, designed to work together for a long time, regardless of the application. CM pumps are equipped with mains powered motors. The CM pump is mainly used as an integrated pump in OEM solutions and in household compressors. It is compact, silent, reliable and flexible and all this makes it an optimal solution for installation and interaction with other components in large systems. It can be installed in systems or used as an independent pump. GRUNDFOS MULTISTAGE SINGLE-PHASE CENTRIFUGAL PUMP CM3-3 SERIES CM is the Grundfos centrifugal electric pump series. Excellent for a wide range of applications, it stands out for its excellent technical characteristics and ease of use. GREAT INSTALLATION AND USE MODULARITY The peculiar feature of the Grundfos CM electric pump is the quality of the components. The shaft, impellers and chambers are in stainless steel, the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The thread is of the Whitworth RP type. The engine is air cooled. The electric pump is equipped with thermal protection with automatic reset for any faults caused by both slow and rapid increases in temperature (constant overload and stall conditions). It is capable of withstanding dry running for short periods. The compact dimensions and the lowered base allow it to be installed even where space is limited. APPLICATIONS The Grundfos centrifugal CM is an electric pump ideal for pressurizing and moving liquids on the surface. There are many applications: washing systems of all kinds, withdrawal from tanks, domestic supply, pressurisation, irrigation, swimming pools, fountains, etc. GUARANTEED SAVINGS AND HIGH COMFORT Grundfos motors are characterized by their high efficiency in relation to low electrical consumption. The savings also materialize in the duration over time due to the high construction quality and the materials used. The shaft, the impellers and the chambers are in stainless steel, the pump body with the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The engine is air cooled. The remarkable reactivity to the demand for water and the silent operation contribute considerably to the efficiency of the product and to the comfort produced both in domestic and professional uses. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase

Read more less

Technical features Model : CM 3-4 Voltage : 1 x 220-240V Flow rate : 4 m3 / h Head : 36 m Power : 0.50kW / 0.7kW Suction : Rp 1" Send : Rp 1" Sound power level : 53 dB(A) Dimensions Height : 20.8cm Length : 30.4cm Width : 14.1cm Weight : 12.00 Kg Grundfos CM-A The two main features of the horizontal multistage CM pump are compactness and modularity, which make different configurations possible. The pump is mainly composed of a series of interchangeable modules, designed to work together for a long time, regardless of the application. CM pumps are equipped with mains powered motors. The CM pump is mainly used as an integrated pump in OEM solutions and in household compressors. It is compact, silent, reliable and flexible and all this makes it an optimal solution for installation and interaction with other components in large systems. It can be installed in systems or used as an independent pump. GRUNDFOS MULTISTAGE SINGLE-PHASE CENTRIFUGAL PUMP CM 3-4 SERIES CM is the Grundfos centrifugal electric pump series. Excellent for a wide range of applications, it stands out for its excellent technical characteristics and ease of use. GREAT INSTALLATION AND USE MODULARITY The peculiar feature of the Grundfos CM electric pump is the quality of the components. The shaft, impellers and chambers are in stainless steel, the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The thread is of the Whitworth RP type. The engine is air cooled. The electric pump is equipped with thermal protection with automatic reset for any faults caused by both slow and rapid increases in temperature (constant overload and stall conditions). It is capable of withstanding dry running for short periods. The compact dimensions and the lowered base allow it to be installed even where space is limited. APPLICATIONS The Grundfos centrifugal CM is an electric pump ideal for pressurizing and moving liquids on the surface. There are many applications: washing systems of all kinds, withdrawal from tanks, domestic supply, pressurisation, irrigation, swimming pools, fountains, etc. GUARANTEED SAVINGS AND HIGH COMFORT Grundfos motors are characterized by their high efficiency in relation to low electrical consumption. The savings also materialize in the duration over time due to the high construction quality and the materials used. The shaft, the impellers and the chambers are in stainless steel, the pump body with the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The engine is air cooled. The remarkable reactivity to the demand for water and the silent operation contribute considerably to the efficiency of the product and to the comfort produced both in domestic and professional uses. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase

Read more less

Technical features Model : JESXM 8 HP power 0.8 KW: 0.6 Max flow rate at 37mt 5 l/min, 0.3 m3/h Max pressure: 6 Bars Max temperature: 45°C Suction depth: 8m Poles: 2 Insulation class: F Degree of protection: IP54 Voltage 230V Pump body: AISI 304 stainless steel Impeller: PPE+PS with glass fibers Shaft: AISI 303 stainless steel Mechanical seal: Ceramic/carbon/NBR Engine Mount: Aluminum Impeller in glass fiber reinforced PPO EBARA Over 20 years of experience in the construction of electric pumps for the industrial and domestic market with a multinational company with over one hundred years of experience behind it. It is a philosophy that unites three inseparable concepts: quality , avant-garde and life . Each EBARA product is designed and built to achieve the highest levels of functionality, guaranteed by a rigorous and complete quality control program which involves the entire manufacturing cycle. EBARA centrifugal electric pumps, covered by several international patents, represent the future in fluid pumping. The stainless steel electric pumps are made through a completely robotic process which allows the optimization of the use of materials, rapid changes of the production line, high levels of standardization, quality control in line. Thanks to the construction technique acquired from the Japanese parent company, the EBARA stainless steel electric pumps are distinguished by their unmistakable hydraulic design. Two production plants , in Veneto (Brendola) and in Trentino (Cles). The Cles production line, fully automated and robotic, is designed to maximize the use of raw materials, allowing the creation of products at the highest levels of standardization and efficiency and minimizing energy requirements. The manufacturing processes are carefully structured to optimize the quality and reliability of the products. The experience accumulated over many years of activity, the ISO 9001 certification and the flexible manufacturing process, supported by advanced information systems (CAD, CAM, SAP), are synonymous with Quality: of the product, of the service, of the brand. JESX-JEX Self-priming electric pumps in AISI 304 stainless steel Applications: Drinking water supply Domestic pressurization Small garden irrigation Emptying tanks and pools Movement of clean water in general Technical features: Practice Easily transportable Light Pump technical data: Maximum working pressure: 6 bar Maximum liquid temperature: 45°C Maximum suction depth: 8 m Suction port G1 for JESX, G1¼ for JEX G1 delivery connection Engine technical data: IE2 and IE3 energy efficient motors starting from 0.75kW Self-ventilated 2-pole asynchronous motor Insulation class F Degree of protection IP54 (on request IP55) Single-phase voltage 230V ±10% 50Hz, three-phase voltage 230/400V ±10% 50Hz Permanently inserted capacitor and built-in automatic reset thermo-amperometric protection for the single-phase motor Protection by the user for the three-phase version Materials: Pump body and seal holder disc in AISI 304 Shaft in AISI 303 (part in contact with the liquid) Impeller in AISI 304 for JEX, in PPE+PS reinforced with glass fibers for JESX Venturi unit plus glass fiber reinforced PPO diffuser Mechanical seal in Ceramic/Carbon/NBR Aluminum support and motor case Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less