Search results for "Piscine"

IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS. First start included Technical features Model : AHZ-044HCDS1 Command Included Optional commands Wi-Fi interface : HCCS-H64H2C1M Temperature sensor : HTS-E1000A1 Energy efficiency SEER: 5.75 SCOP: 3.47 Energy efficiency class: A+++/A++ Performance Nominal capacity in heating : 4.4 ~ 7.0 kW Rated capacity in cooling : 5.1 ~ 6.3 kW Air flow rate : 2700 m 3 /h Water flow rate : 0.50 ~ 1.21 m 3 /h Sound pressure : 47 dB(A) Sound power : 61 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-32 Operating range - Cooling: 5° ~ 46° Cbs - Heating: -25° ~ 35° Cbs - DHW : -25° ~ 40° Cbs Installation data Gate valves diameter: G 1” - G 1” (male) Inlet / outlet piping diameter: G 1” / G 1” (female) Dimensions and weight Dimensions (HxWxD): 815x1270x340 mm Weight : 88Kg Hisense Hi-Therma heat pump Hi-Therma monoblock is an air-water heat pump system with indoor and outdoor units combined in a single module positioned outdoors and to which the water pipes to the system are directly connected. It is therefore not necessary to carry out work on the refrigerant pipes, considerably simplifying the installation, allowing the same also to non-certified technicians and thus avoiding the registration practices on the F-gas electronic register. The unit is equipped with a heat exchanger, water circulator, expansion tank and all the main functional and safety hydraulic components. High Efficiency and Excellent Performance Ecological R32 Refrigerant The R32 refrigerant contributes to the achievement of the objectives of the F-gas regulation as described in the EU regulation 517/2014. Hisense Hi-Therma heat pump system adopts R32 refrigerant, which is a perfect solution to meet European targets on maximum CO 2 emissions Characteristics ◆ Zero Ozone Impact Potential ◆ Reduced Global Warming Potential ◆ Reduced Global Warming Potential ◆ Single component refrigerant: easy to handle High Efficiency A+++ Hi-Therma offers the most efficient solution for domestic heating and domestic hot water production. The highest energy classification A+++ (in low temperature water conditions) and A++ (at medium temperature) ensures savings on the electricity bill, reducing consumption, with a consequent advantage also on the environmental impact High Efficiency Twin Rotary Inverter Compressor High efficiency Twin Rotary DC Inverter compressor. Equipped with unique double pressure chamber design with symmetrical position which can effectively reduce vibration, noise and improve its performance, even in low frequency operation. Low lubricant emission, stable oil return and gas-liquid separator make the system more reliable 1. High efficiency electric motor Optimized electric motor design to increase compressor performance 2. Optimized rotor design Lowering the center of gravity of the compressor significantly reduces vibration and noise 3. Comprehensive mechanism design Improved volumetric efficiency and overall performance 4. Screw fixing Improve the fixing effect and reduce the deformation of the core Simplified installation The monobloc Hi-Therma unit allows for easy installation with no need for refrigerant piping work or additional refrigerant. It only needs the connections on the pipes towards the internal system Main hydraulic components Insulated plate heat exchanger Expansion vessel Very high head DC circulator, flow rate reading on command Wide Operating Range Heating operation is guaranteed up to external temperatures of -25°C, therefore it is able to satisfy the user even in very harsh areas and can produce delivery water up to 60°C. In DHW mode it can operate up to an external 46°C and produce hot water inside the boiler up to 55°C, 75°C with the aid of an electric resistance. Management of External Heat Sources Hi-Therma can intelligently manage multiple supplementary heat sources: electric resistance for heating, electric resistance in the DHW tank, third-party boiler, solar thermal system Smart Grids The Hi-Therma system can be integrated with a photovoltaic system in order to optimize the self-consumption of the energy produced, thus reducing the energy requirement from the electricity grid Double Thermal Zone By managing two circuits with water at different temperatures, Hi-Therma adapts to the characteristics of the different terminals present in the system, thus responding to the needs of both new buildings and renovations Sound Reduction Low Noise Mode For optimal user comfort, the system can operate at low sound emission with a simple touch on the control, or via remote external input. Maximum reduction in this mode 8 dB(A). Night mode By means of night mode the period of low noise operation can be programmed according to the needs of the users. Sound pressure can be reduced up to 35dB(A) Up to 7 indoor environments with independent temperature control With the Hi-Therma system, up to 7 ambient temperatures can be managed independently through the installation of optional accessories: wall sensors, maximum 6, or thermostats, maximum 2. Hi-Therma can also manage swimming pool heating with a specially dedicated mode. Once this function is activated, the hot water can be sent to a heat exchanger allowing the tub to be heated and kept at a comfortable temperature between 24 and 33 ℃ Screed drying Hi-Therma is equipped with an automatic program for drying the radiant floor screed of a house under construction or renovation. The drying process takes 7 days. In the first three days the system works with water temperature at 25℃ and in the following four days with maximum outlet water temperature set by controller Standard Color Touch Remote Control for Monobloc, optional for Split version Sliding Screens Swiping the screen left and right quickly navigates between the different interfaces ◆ Elegant design ◆ Compact (90×90mm) ◆ Intuitive and touch screen General characteristics ◆ Setup wizard for commissioning. ◆ 10 languages, including Italian. ◆ View energy consumption and capacity. ◆ Water temperature control of the circuits and individual control of the room temperature. ◆ Alarm code and advanced parameter display; useful for maintenance. ◆ Weekly timer and holiday mode. ◆ ECO/Silent/Night mode suitable for different user needs. ◆ Physical button for on/off and reset Slide adjustment The temperature can be adjusted quickly by sliding the semicircle, especially for large variation ranges. The lower physical button (on/off and reset) does not affect the aesthetics thanks to its lateral positioning Theme setting Three different themes, day, night and auto, can be applied to different scenarios at different times, giving you a more user-friendly and personalized interface view Easy installation In designing the control we have given great importance to practicality and ease of installation. Thanks to the rear anchoring panel, assembly and disassembly is very quick Room thermostat The optional thermostat allows you to set both room temperature and to manage the most useful control parameters on the indoor unit. It allows you to adjust the room temperature precisely and in real time, ensuring high comfort and energy savings. It is possible to connect up to 2 thermostats per unit Features HSXE-VC04 ◆ Elegant design ◆ Flat shape for easy wall installation ◆ Compact (86×86mm) ◆ Intuitive control via touch buttons ◆ Room temperature and DHW set ◆ ECO/DHW/Timer (0.5-24 hours) One button for DHW Users can access the domestic hot water mode setting with one touch and also manage the main circuit settings Remote Management Via App Thanks to the optional Hi-Mit II interface it is possible to manage and monitor the system remotely. Connected Hi-Mit II to the LAN cable or to the WiFi router, users can manage the system anytime and anywhere, using the appropriate App from their smartphone Simple configuration and use ◆ Up to 64 managed drives ◆ Up to 32 users ◆ Consumption management ◆ Faults ◆ On/Off ◆ Circuit/room/DHW temperatures ◆ 14 languages, including Italian ◆ Multiple scenarios that can be set Energy management Hi-Mit allows intelligent energy management, thanks to the display of readings divided by day, week or month. Being able to set also the low consumption mode can further increase the energy saving of the system Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS. First start included Technical features Model : AHZ-080HCDS1 Command Included Optional commands Wi-Fi interface : HCCS-H64H2C1M Temperature sensor : HTS-E1000A1 Energy efficiency SEER: 5.83 SCOP : 3.50 Energy efficiency class: A+++/A++ Performance Rated capacity in heating : 8.0 ~ 11.0 kW Rated capacity in cooling : 7.2 ~ 9.1 kW Air flow rate : 2700 m 3 /h Water flow rate : 0.60 ~ 1.90 m 3 /h Sound Pressure : 47 ~ 50dB(A) Sound power : 61 ~ 64 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-32 Operating range - Cooling: 5° ~ 46° Cbs - Heating: -25° ~ 35° Cbs - DHW : -25° ~ 40° Cbs Installation data Gate valves diameter: G 1” - G 1” (male) Inlet / outlet piping diameter: G 1” / G 1” (female) Dimensions and weight Dimensions (HxWxD): 815x1270x340 mm Weight : 88Kg Hisense Hi-Therma heat pump Hi-Therma monoblock is an air-water heat pump system with indoor and outdoor units combined in a single module positioned outdoors and to which the water pipes to the system are directly connected. It is therefore not necessary to carry out work on the refrigerant pipes, considerably simplifying the installation, allowing the same also to non-certified technicians and thus avoiding the registration practices on the F-gas electronic register. The unit is equipped with a heat exchanger, water circulator, expansion tank and all the main functional and safety hydraulic components. High Efficiency and Excellent Performance Ecological R32 Refrigerant The R32 refrigerant contributes to the achievement of the objectives of the F-gas regulation as described in the EU regulation 517/2014. Hisense Hi-Therma heat pump system adopts R32 refrigerant, which is a perfect solution to meet European targets on maximum CO 2 emissions Characteristics ◆ Zero Ozone Impact Potential ◆ Reduced Global Warming Potential ◆ Reduced Global Warming Potential ◆ Single component refrigerant: easy to handle High Efficiency A+++ Hi-Therma offers the most efficient solution for domestic heating and domestic hot water production. The highest energy classification A+++ (in low temperature water conditions) and A++ (at medium temperature) ensures savings on the electricity bill, reducing consumption, with a consequent advantage also on the environmental impact High Efficiency Twin Rotary Inverter Compressor High efficiency Twin Rotary DC Inverter compressor. Equipped with unique double pressure chamber design with symmetrical position which can effectively reduce vibration, noise and improve its performance, even in low frequency operation. Low lubricant emission, stable oil return and gas-liquid separator make the system more reliable 1. High efficiency electric motor Optimized electric motor design to increase compressor performance 2. Optimized rotor design Lowering the center of gravity of the compressor significantly reduces vibration and noise 3. Comprehensive mechanism design Improved volumetric efficiency and overall performance 4. Screw fixing Improve the fixing effect and reduce the deformation of the core Simplified installation The monobloc Hi-Therma unit allows for easy installation with no need for refrigerant piping work or additional refrigerant. It only needs the connections on the pipes towards the internal system Main hydraulic components Insulated plate heat exchanger Expansion tank Very high head DC circulator, flow rate reading on command Wide Operating Range Heating operation is guaranteed up to external temperatures of -25°C, therefore it is able to satisfy the user even in very harsh areas and can produce delivery water up to 60°C. In DHW mode it can operate up to an external 46°C and produce hot water inside the boiler up to 55°C, 75°C with the aid of an electric resistance. Management of External Heat Sources Hi-Therma can intelligently manage multiple supplementary heat sources: electric resistance for heating, electric resistance in the DHW tank, third-party boiler, solar thermal system Smart Grids The Hi-Therma system can be integrated with a photovoltaic system in order to optimize the self-consumption of the energy produced, thus reducing the energy requirement from the electricity grid Double Thermal Zone By managing two circuits with water at different temperatures, Hi-Therma adapts to the characteristics of the different terminals present in the system, thus responding to the needs of both new buildings and renovations Sound Reduction Low Noise Mode For optimal user comfort, the system can operate at low sound emission with a simple touch on the control, or via remote external input. Maximum reduction in this mode 8 dB(A). Night mode By means of night mode the period of low noise operation can be programmed according to the needs of the users. Sound pressure can be reduced up to 35dB(A) Up to 7 indoor environments with independent temperature control With the Hi-Therma system, up to 7 ambient temperatures can be managed independently through the installation of optional accessories: wall sensors, maximum 6, or thermostats, maximum 2. Hi-Therma can also manage swimming pool heating with a specially dedicated mode. Once this function is activated, the hot water can be sent to a heat exchanger allowing the tub to be heated and kept at a comfortable temperature between 24 and 33 ℃ Screed drying Hi-Therma is equipped with an automatic program for drying the radiant floor screed of a house under construction or renovation. The drying process takes 7 days. In the first three days the system works with water temperature at 25℃ and in the following four days with maximum outlet water temperature set by controller Standard Color Touch Remote Control for Monobloc, optional for Split version Sliding Screens Swiping the screen left and right quickly navigates between the different interfaces ◆ Elegant design ◆ Compact (90×90mm) ◆ Intuitive and touch screen General characteristics ◆ Setup wizard for commissioning. ◆ 10 languages, including Italian. ◆ View energy consumption and capacity. ◆ Water temperature control of the circuits and individual control of the room temperature. ◆ Alarm code and advanced parameter display; useful for maintenance. ◆ Weekly timer and holiday mode. ◆ ECO/Silent/Night mode suitable for different user needs. ◆ Physical button for on/off and reset Slide adjustment The temperature can be adjusted quickly by sliding the semicircle, especially for large variation ranges. The lower physical button (on/off and reset) does not affect the aesthetics thanks to its lateral positioning Theme setting Three different themes, day, night and auto, can be applied to different scenarios at different times, giving you a more user-friendly and personalized interface view Easy installation In designing the control we have given great importance to practicality and ease of installation. Thanks to the rear anchoring panel, assembly and disassembly is very quick Room thermostat The optional thermostat allows you to set both room temperature and to manage the most useful control parameters on the indoor unit. It allows you to adjust the room temperature precisely and in real time, ensuring high comfort and energy savings. It is possible to connect up to 2 thermostats per unit Features HSXE-VC04 ◆ Elegant design ◆ Flat shape for easy wall installation ◆ Compact (86×86mm) ◆ Intuitive control via touch buttons ◆ Room temperature and DHW set ◆ ECO/DHW/Timer (0.5-24 hours) One button for DHW Users can access the domestic hot water mode setting with one touch and also manage the main circuit settings Remote Management Via App Thanks to the optional Hi-Mit II interface it is possible to manage and monitor the system remotely. Connected Hi-Mit II to the LAN cable or to the WiFi router, users can manage the system anytime and anywhere, using the appropriate App from their smartphone Simple configuration and use ◆ Up to 64 managed drives ◆ Up to 32 users ◆ Consumption management ◆ Faults ◆ On/Off ◆ Circuit/room/DHW temperatures ◆ 14 languages, including Italian ◆ Multiple scenarios that can be set Energy management Hi-Mit allows intelligent energy management, thanks to the display of readings divided by day, week or month. Being able to set also the low consumption mode can further increase the energy saving of the system Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS. First start included Technical features Indoor Unit Catalog Code : AHM-080HCDSAA Outdoor Unit Catalog Code: AHW-080HCDS1 Command Included Optional commands Wi-Fi interface : HCCS-H64H2C1M Temperature sensor : HTS-E1000A1 Energy efficiency SEER: 5.83 SCOP: 3.42 Energy efficiency class: A+++/A++ Performance Rated capacity in heating : 8.0 ~ 11.0 kW Rated capacity in cooling : 7.2 ~ 9.1 kW Water flow rate : 0.60 ~ 1.90 m 3 /h Indoor unit sound pressure : 28 dB(A) Outdoor unit sound pressure : 47 ~ 50 dB(A) Indoor unit sound power : 42 dB(A) External unit sound power : 64 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-32 Operating range - Cooling: 5° ~ 46° Cbs - Heating: -25° ~ 35° Cbs - DHW : -25° ~ 40° Cbs Installation data Liquid piping diameter : 6.35 mm (1/4") Gas pipe diameter: 12.70 (1/2") Maximum piping length : 45~50 m Maximum difference in height indoor unit / outdoor unit: 30 m Dimensions and weight Internal unit dimensions (HxWxD): 890x520x320 mm Outdoor unit weight: 44.5 Kg External unit dimensions (HxWxD): 750x900x340 mm Outdoor unit weight: 50.5 Kg Hisense Hi-Therma heat pump Hi-Therma monoblock is an air-water heat pump system with indoor and outdoor units combined in a single module positioned outdoors and to which the water pipes to the system are directly connected. It is therefore not necessary to carry out work on the refrigerant pipes, considerably simplifying the installation, allowing the same also to non-certified technicians and thus avoiding the registration practices on the F-gas electronic register. The unit is equipped with a heat exchanger, water circulator, expansion tank and all the main functional and safety hydraulic components. High Efficiency and Excellent Performance Ecological R32 Refrigerant The R32 refrigerant contributes to the achievement of the objectives of the F-gas regulation as described in the EU regulation 517/2014. Hisense Hi-Therma heat pump system adopts R32 refrigerant, which is a perfect solution to meet European targets on maximum CO 2 emissions Characteristics ◆ Zero Ozone Impact Potential ◆ Reduced Global Warming Potential ◆ Reduced Global Warming Potential ◆ Single component refrigerant: easy to handle High Efficiency A+++ Hi-Therma offers the most efficient solution for domestic heating and domestic hot water production. The highest energy classification A+++ (in low temperature water conditions) and A++ (at medium temperature) ensures savings on the electricity bill, reducing consumption, with a consequent advantage also on the environmental impact High Efficiency Twin Rotary Inverter Compressor High efficiency Twin Rotary DC Inverter compressor. Equipped with unique double pressure chamber design with symmetrical position which can effectively reduce vibration, noise and improve its performance, even in low frequency operation. Low lubricant emission, stable oil return and gas-liquid separator make the system more reliable 1. High efficiency electric motor Optimized electric motor design to increase compressor performance 2. Optimized rotor design Lowering the center of gravity of the compressor significantly reduces vibration and noise 3. Comprehensive mechanism design Improved volumetric efficiency and overall performance 4. Screw fixing Improve the fixing effect and reduce the deformation of the core Simplified installation The monobloc Hi-Therma unit allows for easy installation with no need for refrigerant piping work or additional refrigerant. It only needs the connections on the pipes towards the internal system Main hydraulic components Insulated plate heat exchanger Expansion vessel Very high head DC circulator, flow rate reading on command Wide Operating Range Heating operation is guaranteed up to external temperatures of -25°C, therefore it is able to satisfy the user even in very harsh areas and can produce delivery water up to 60°C. In DHW mode it can operate up to an external 46°C and produce hot water inside the boiler up to 55°C, 75°C with the aid of an electric resistance. Management of External Heat Sources Hi-Therma can intelligently manage multiple supplementary heat sources: electric resistance for heating, electric resistance in the DHW tank, third-party boiler, solar thermal system Smart Grids The Hi-Therma system can be integrated with a photovoltaic system in order to optimize the self-consumption of the energy produced, thus reducing the energy requirement from the electricity grid Double Thermal Zone By managing two circuits with water at different temperatures, Hi-Therma adapts to the characteristics of the different terminals present in the system, thus responding to the needs of both new buildings and renovations Sound Reduction Low Noise Mode For optimal user comfort, the system can operate at low sound emission with a simple touch on the control, or via remote external input. Maximum reduction in this mode 8 dB(A). Night mode By means of night mode the period of low noise operation can be programmed according to the needs of the users. Sound pressure can be reduced up to 35dB(A) Up to 7 indoor environments with independent temperature control With the Hi-Therma system, up to 7 ambient temperatures can be managed independently through the installation of optional accessories: wall sensors, maximum 6, or thermostats, maximum 2. Hi-Therma can also manage swimming pool heating with a specially dedicated mode. Once this function is activated, the hot water can be sent to a heat exchanger allowing the tub to be heated and kept at a comfortable temperature between 24 and 33 ℃ Screed drying Hi-Therma is equipped with an automatic program for drying the radiant floor screed of a house under construction or renovation. The drying process takes 7 days. In the first three days the system works with water temperature at 25℃ and in the following four days with maximum outlet water temperature set by controller Standard Color Touch Remote Control for Monobloc, optional for Split version Sliding Screens Swiping the screen left and right quickly navigates between the different interfaces ◆ Elegant design ◆ Compact (90×90mm) ◆ Intuitive and touch screen General characteristics ◆ Setup wizard for commissioning. ◆ 10 languages, including Italian. ◆ View energy consumption and capacity. ◆ Water temperature control of the circuits and individual control of the room temperature. ◆ Alarm code and advanced parameter display; useful for maintenance. ◆ Weekly timer and holiday mode. ◆ ECO/Silent/Night mode suitable for different user needs. ◆ Physical button for on/off and reset Slide adjustment The temperature can be adjusted quickly by sliding the semicircle, especially for large variation ranges. The lower physical button (on/off and reset) does not affect the aesthetics thanks to its lateral positioning Theme setting Three different themes, day, night and auto, can be applied to different scenarios at different times, giving you a more user-friendly and personalized interface display Easy installation In designing the control we have given great importance to practicality and ease of installation. Thanks to the rear anchoring panel, assembly and disassembly is very quick Room thermostat The optional thermostat allows you to set both room temperature and to manage the most useful control parameters on the indoor unit. It allows you to adjust the room temperature precisely and in real time, ensuring high comfort and energy savings. It is possible to connect up to 2 thermostats per unit Features HSXE-VC04 ◆ Elegant design ◆ Flat shape for easy wall installation ◆ Compact (86×86mm) ◆ Intuitive control via touch buttons ◆ Room temperature and DHW set ◆ ECO/DHW/Timer (0.5-24 hours) One button for DHW Users can access the domestic hot water mode setting with one touch and also manage the main circuit settings Remote Management Via App Thanks to the optional Hi-Mit II interface it is possible to manage and monitor the system remotely. Connected Hi-Mit II to the LAN cable or to the WiFi router, users can manage the system anytime and anywhere, using the appropriate App from their smartphone Simple configuration and use ◆ Up to 64 managed drives ◆ Up to 32 users ◆ Consumption management ◆ Faults ◆ On/Off ◆ Circuit/room/DHW temperatures ◆ 14 languages, including Italian ◆ Multiple scenarios that can be set Energy management Hi-Mit allows intelligent energy management, thanks to the display of readings divided by day, week or month. Being able to set also the low consumption mode can further increase the energy saving of the system Hi-Therma indoor unit Hi-Therma Split is an air-water heat pump system with separate hydronic module, connected to the outdoor unit via refrigerant pipes and housed inside the building, therefore protected from atmospheric agents and any water freezing phenomena in the harsher periods. This internal module is equipped with a heat exchanger, water circulator, expansion vessel and all the main functional and safety hydraulic components Elegant appearance Compact and functional design Integrated control Intuitive control interfaces Easy installation Facilitated maintenance The position of the components in the indoor unit has been completely optimised. The electrical panel can be rotated 88° facilitating maintenance of the rear parts. Furthermore, the control on the machine can be easily extracted from the front panel and, thanks to a special anchoring system, hung on the electrical box to further facilitate maintenance operations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS. First start included Technical features Indoor Unit Catalog Code : AHM-060HCDSAA Outdoor Unit Catalog Code: AHW-060HCDS1 Command Included Optional commands Wi-Fi interface : HCCS-H64H2C1M Temperature sensor : HTS-E1000A1 Energy efficiency SEER: 5.85 SCOP: 3.33 Energy efficiency class: A+++/A++ Performance Nominal capacity in heating : 6.0 ~ 8.0 kW Rated capacity in cooling : 6.3 ~ 7.6 kW Water flow rate : 0.60 ~ 1.53 m 3 /h Indoor unit sound pressure : 28 dB(A) Outdoor Unit Sound Pressure : 47 ~ 48 dB(A) Indoor unit sound power : 42 dB(A) Outdoor unit sound power : 62 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-32 Operating range - Cooling: 5° ~ 46° Cbs - Heating: -25° ~ 35° Cbs - DHW : -25° ~ 40° Cbs Installation data Liquid piping diameter : 6.35 mm (1/4") Gas pipe diameter: 12.70 (1/2") Maximum piping length: 40 m Maximum difference in height indoor unit / outdoor unit: 30 m Dimensions and weight Internal unit dimensions (HxWxD): 890x520x320 mm Weight of outdoor unit: 43.5 Kg External unit dimensions (HxWxD): 750x900x340 mm Outdoor unit weight: 49.5 Kg Hisense Hi-Therma heat pump Hi-Therma monoblock is an air-water heat pump system with indoor and outdoor units combined in a single module positioned outdoors and to which the water pipes to the system are directly connected. It is therefore not necessary to carry out work on the refrigerant pipes, considerably simplifying the installation, allowing the same also to non-certified technicians and thus avoiding the registration practices on the F-gas electronic register. The unit is equipped with a heat exchanger, water circulator, expansion tank and all the main functional and safety hydraulic components. High Efficiency and Excellent Performance Ecological R32 Refrigerant The R32 refrigerant contributes to the achievement of the objectives of the F-gas regulation as described in the EU regulation 517/2014. Hisense Hi-Therma heat pump system adopts R32 refrigerant, which is a perfect solution to meet European targets on maximum CO 2 emissions Characteristics ◆ Zero Ozone Impact Potential ◆ Reduced Global Warming Potential ◆ Reduced Global Warming Potential ◆ Single component refrigerant: easy to handle High Efficiency A+++ Hi-Therma offers the most efficient solution for domestic heating and domestic hot water production. The highest energy classification A+++ (in low temperature water conditions) and A++ (at medium temperature) ensures savings on the electricity bill, reducing consumption, with a consequent advantage also on the environmental impact High Efficiency Twin Rotary Inverter Compressor High efficiency Twin Rotary DC Inverter compressor. Equipped with unique double pressure chamber design with symmetrical position which can effectively reduce vibration, noise and improve its performance, even in low frequency operation. Low lubricant emission, stable oil return and gas-liquid separator make the system more reliable 1. High efficiency electric motor Optimized electric motor design to increase compressor performance 2. Optimized rotor design Lowering the center of gravity of the compressor significantly reduces vibration and noise 3. Comprehensive mechanism design Improved volumetric efficiency and overall performance 4. Screw fixing Improve the fixing effect and reduce the deformation of the core Simplified installation The monobloc Hi-Therma unit allows for easy installation with no need for refrigerant piping work or additional refrigerant. It only needs the connections on the pipes towards the internal system Main hydraulic components Insulated plate heat exchanger Expansion tank Very high head DC circulator, flow rate reading on command Wide Operating Range Heating operation is guaranteed up to external temperatures of -25°C, therefore it is able to satisfy the user even in very harsh areas and can produce delivery water up to 60°C. In DHW mode it can operate up to an external 46°C and produce hot water inside the boiler up to 55°C, 75°C with the aid of an electric resistance. Management of External Heat Sources Hi-Therma can intelligently manage multiple supplementary heat sources: electric resistance for heating, electric resistance in the DHW tank, third-party boiler, solar thermal system Smart Grids The Hi-Therma system can be integrated with a photovoltaic system in order to optimize the self-consumption of the energy produced, thus reducing the energy requirement from the electricity grid Double Thermal Zone By managing two circuits with water at different temperatures, Hi-Therma adapts to the characteristics of the different terminals present in the system, thus responding to the needs of both new buildings and renovations Sound Reduction Low Noise Mode For optimal user comfort, the system can operate at low sound emission with a simple touch on the control, or via remote external input. Maximum reduction in this mode 8 dB(A). Night mode By means of night mode the period of low noise operation can be programmed according to the needs of the users. Sound pressure can be reduced up to 35dB(A) Up to 7 indoor environments with independent temperature control With the Hi-Therma system, up to 7 ambient temperatures can be managed independently through the installation of optional accessories: wall sensors, maximum 6, or thermostats, maximum 2. Hi-Therma can also manage swimming pool heating with a specially dedicated mode. Once this function is activated, the hot water can be sent to a heat exchanger allowing the tub to be heated and kept at a comfortable temperature between 24 and 33 ℃ Screed drying Hi-Therma is equipped with an automatic program for drying the radiant floor screed of a house under construction or renovation. The drying process takes 7 days. In the first three days the system works with water temperature at 25℃ and in the following four days with maximum outlet water temperature set by controller Standard Color Touch Remote Control for Monobloc, optional for Split version Sliding Screens Swiping the screen left and right quickly navigates between the different interfaces ◆ Elegant design ◆ Compact (90×90mm) ◆ Intuitive and touch screen General characteristics ◆ Setup wizard for commissioning. ◆ 10 languages, including Italian. ◆ View energy consumption and capacity. ◆ Water temperature control of the circuits and individual control of the room temperature. ◆ Alarm code and advanced parameter display; useful for maintenance. ◆ Weekly timer and holiday mode. ◆ ECO/Silent/Night mode suitable for different user needs. ◆ Physical button for on/off and reset Slide adjustment The temperature can be adjusted quickly by sliding the semicircle, especially for large variation ranges. The lower physical button (on/off and reset) does not affect the aesthetics thanks to its lateral positioning Theme setting Three different themes, day, night and auto, can be applied to different scenarios at different times, giving you a more user-friendly and personalized interface view Easy installation In designing the control we have given great importance to practicality and ease of installation. Thanks to the rear anchoring panel, assembly and disassembly is very quick Room thermostat The optional thermostat allows you to set both room temperature and to manage the most useful control parameters on the indoor unit. It allows you to adjust the room temperature precisely and in real time, ensuring high comfort and energy savings. It is possible to connect up to 2 thermostats per unit Features HSXE-VC04 ◆ Elegant design ◆ Flat shape for easy wall installation ◆ Compact (86×86mm) ◆ Intuitive control via touch buttons ◆ Room temperature and DHW set ◆ ECO/DHW/Timer (0.5-24 hours) One button for DHW Users can access the domestic hot water mode setting with one touch and also manage the main circuit settings Remote Management Via App Thanks to the optional Hi-Mit II interface it is possible to manage and monitor the system remotely. Connected Hi-Mit II to the LAN cable or to the WiFi router, users can manage the system anytime and anywhere, using the appropriate App from their smartphone Simple configuration and use ◆ Up to 64 managed drives ◆ Up to 32 users ◆ Consumption management ◆ Faults ◆ On/Off ◆ Circuit/room/DHW temperatures ◆ 14 languages, including Italian ◆ Multiple scenarios that can be set Energy management Hi-Mit allows intelligent energy management, thanks to the display of readings divided by day, week or month. Being able to set also the low consumption mode can further increase the energy saving of the system Hi-Therma indoor unit Hi-Therma Split is an air-water heat pump system with separate hydronic module, connected to the outdoor unit via refrigerant pipes and housed inside the building, therefore protected from atmospheric agents and any water freezing phenomena in the harsher periods. This internal module is equipped with a heat exchanger, water circulator, expansion vessel and all the main functional and safety hydraulic components Elegant appearance Compact and functional design Integrated control Intuitive control interfaces Easy installation Facilitated maintenance The position of the components in the indoor unit has been completely optimised. The electrical panel can be rotated 88° facilitating maintenance of the rear parts. Furthermore, the control on the machine can be easily extracted from the front panel and, thanks to a special anchoring system, hung on the electrical box to further facilitate maintenance operations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less