Si avvisa la gentile clientela che Caldaiemurali va in vacanza dal 10 al 18 Agosto. Mercoledì 7 Agosto effettueremo le ultime spedizioni, la regolare attività riprenderà a partire dal 19 Agosto, Buone Vacanze.
Mantieni l'acqua nella tua spa gonfiabile sempre pulita con i filtri per piscina . Il filtro in tessuto non tessuto assicura un filtraggio efficace delle impurità, come polvere, sabbia, capelli, ecc. Questo set da 6 cartucce ti assicura una scorta per mantenere l'acqua sempre limpida per i tuoi momenti di relax nella spa gonfiabile.Caratteristiche:• Compatibili solo con SPA modello:Asin B09V7287SV, SKU 848-047V90NUAsin B09V6Q6BPW, SKU 848-046V92NUAsin B09V7F7XWY, SKU 848-046V93NU• Ottime per filtrare impurità dall'acqua della piscina• Tessuto non tessuto con grande capacità di filtraggio• Design a pieghe per una maggiore area di filtraggioDati tecnici:• Colore: Blu, Bianco• Materiale: PP, Tessuto non tessuto• Dimensioni generali: Ø10.5 x 8A cm• Diametro interno: 5.5 cm• Contenuto della confezione:• 6 x Filtri per piscina• 1 x Manuale
AquaSweeper di Bestway è un pulitore automatico per le piscine fuori terra tra i più comodi della linea Flowclear, capace di offrire una soluzione semplice ma efficace per la cura dalla propria piscina.Il design brevettato dell'aspiratore AquaSweeper vi consente di mantenere l'acqua sempre pulita e cristallina per tutta la stagione e di alleggerire il sistema di filtraggio della piscina.
L'aspiratore è composto da un pre-filtro integrato che raccoglie detriti, foglie e sabbia accumulati sul fondo della vasca prima che essi raggiungano il filtro principale, in modo da prolungare la sua durata ed evitarne l'ostruzione. Il sistema a clip posizionato sulla parte inferiore dell'aspiratore vi consente in ogni modo di aprire e rimuovere il vano contenitore con molta facilità provvedendo alla sua pulizia. Oltre questi dettagli, l'aspiratore è provvisto di un galleggiante che assieme la zavorra sull'estremità garantisce una maggiore manovrabilità in acqua e un più facile scorrimento sul fondale e sulle pareti della vasca.
L'aspiratore AcquaSweeper è molto facile da utilizzare, per avviare il sistema vi basterà semplicemente collegarla alla pompa del filtro della vostra piscina. Il regolatore di pressione vi aiuterà a controllare il flusso dell'acqua immessa e potrete così utilizzarlo anche nel caso in cui disponete di una pompa per il filtro ad alta potenza.
L'aspirazione avviene in modo rapido e silenzioso e sarete costantemente supportati dal tubo flessibile lungo 7,5 metri che vi permetterà di raggiungere i punti più lontani della vasca. I connettori inclusi nella confezione rendono inoltre l'aspiratore compatibile con tutte le piscine della collezione Bestway persino con le piscine a struttura morbida.
L'aspiratore AquaSweeper è uno dei tanti accessori per piscine della linea Flowclear progettati per rendere la pulizia e la manutenzione della vostra piscina fuori terra il più semplice e conveniente possibile. La gamma comprende anche depuratori d'acqua, scalette per piscina, pompe di filtraggio ed altri elementi essenziali per le piscine fuori terra.
Caratteristiche tecniche
Design brevettato specifico per piscine fuori terra con pompe a filtro a partire da 3,785L/hr o con filtri a sabbia da 3,028L/hr
Consigliato anche per piscine fuori terra morbide (6,7m)
Aspirazione regolabile per prestazioni superiori
Pulizia silenziosa e rapida del fondo piscina
Tubo flessibile 7,5m
Aspiratore con pre-filtro, galleggiante e zavorra per una manovrabilità ottimale
Connettori per diverse tipologie di piscine Bestway
Prepara la crema solare, una bibita fresca e rilassati sotto al sole con il tuo lettino sdraio . Costruito in metallo e tessuto Oxford, è resistente e robusto: perfetto da usare in giardino, al mare o a bordo piscina. Puoi regolare lo schienale su due livelli e trasformare la tua sdraio in una chaise longue, ideale per leggere un libro sorseggiando la tua bibita fresca, o in un lettino, perfetto per prendere il sole in totale relax.Caratteristiche- Lettino prendisole pieghevole da giardino, mare o piscina - Telaio in metallo e seduta in tessuto Oxford con finitura in PVC, facile da pulire e resistente - Schienale reclinabile per trasformare la sdraio in un lettino o in una chaise longue - Cuscino poggiatesta imbottito e rimovibileDati tecnici- Colore: Grigio - Materiali: Metallo, Oxford - Dimensioni generali: 135L x 60P x 89Acm - Dimensioni da sdraiata: 178L x 60P x 29Acm - Dimensioni da piegata: 97L x 60.5P x 12Acm - Dimensioni seduta (sedia): 47L x 50P x 45Acm - Dimensioni schienale (sedia): 75L x 47Pcm - Dimensioni poggiapiedi (sedia): 56L x 47Pcm - Dimensioni cuscino: 38L x 13P x 6Acm - Altezza parte anteriore (lettino): 23cm - Altezza schienale (lettino): 29cm - Altezza regolabile su 2 Livelli: 29cm (più basso), 89cm (più alto) - Carico massimo: 136kg
Stai cercando dei mobili da giardino per il tuo cortile? Prova questo set in rattan da 7 pezzi. Il rattan di vimini PE intrecciato interamente a mano si abbina ai cuscini imbottiti. Costruito per stile e resilienza, la struttura in acciaio verniciata a polvere aggiunge stabilità e robustezza. Il tavolo da pranzo e il bracciolo della sedia sono dotati di piano in legno di acacia. La manutenzione di questo mobile leggero è ridotta e si adatta al meglio al tuo spazio e alle tue preferenze. Caratteristiche - Set di 7 pezzi che include 6 sedie singole imbottite e 1 tavolo da pranzo - Tavolo e bracciolo della sedia rivestiti di legno d'acacia - Perfetto per terrazze, piscine, cortili e altri ambienti esterni - Le strutture in acciaio verniciato a polvere e i piedi in alluminio rendono tavolo e sedie forti e robusti - Imbottiture riempite di cotone per un comfort extra - Copricuscini dotati di cerniere per essere rimossi e lavabili - Assemblaggio richiesto Dati tecnici - Colori: Rattan nero, Imbottiture beige - Materiale: Acciaio, PE rattan, Poliestere - Dimensioni sedia: 58L x 58L x 85Acm - Dimensioni seduta: 45/39L x 47Pcm - Altezza seduta: 42cm - Dimensioni tavolo da pranzo: 130L x 90L x 75Acm - Capacità di peso: 160kg (sedia) 80kg (tavolo)
IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS.
First start included
Technical features
Model : AHZ-044HCDS1
Command Included
Optional commands
Wi-Fi interface : HCCS-H64H2C1M
Temperature sensor : HTS-E1000A1
Energy efficiency
SEER: 5.75
SCOP: 3.47
Energy efficiency class: A+++/A++
Performance
Nominal capacity in heating : 4.4 ~ 7.0 kW
Rated capacity in cooling : 5.1 ~ 6.3 kW
Air flow rate : 2700 m 3 /h
Water flow rate : 0.50 ~ 1.21 m 3 /h
Sound pressure : 47 dB(A)
Sound power : 61 dB(A)
Electrical data
Power supply (V,Hz, Ø) : 220~240/50/1
Refrigerant gas : R-32
Operating range
- Cooling: 5° ~ 46° Cbs
- Heating: -25° ~ 35° Cbs
- DHW : -25° ~ 40° Cbs
Installation data
Gate valves diameter: G 1” - G 1” (male)
Inlet / outlet piping diameter: G 1” / G 1” (female)
Dimensions and weight
Dimensions (HxWxD): 815x1270x340 mm
Weight : 88Kg
Hisense Hi-Therma heat pump
Hi-Therma monoblock is an air-water heat pump system with indoor and outdoor units combined in a single module positioned outdoors and to which the water pipes to the system are directly connected. It is therefore not necessary to carry out work on the refrigerant pipes, considerably simplifying the installation, allowing the same also to non-certified technicians and thus avoiding the registration practices on the F-gas electronic register. The unit is equipped with a heat exchanger, water circulator, expansion tank and all the main functional and safety hydraulic components.
High Efficiency and Excellent Performance Ecological R32 Refrigerant
The R32 refrigerant contributes to the achievement of the objectives of the F-gas regulation as described in the EU regulation 517/2014. Hisense Hi-Therma heat pump system adopts R32 refrigerant, which is a perfect solution to meet European targets on maximum CO 2 emissions
Characteristics
◆ Zero Ozone Impact Potential
◆ Reduced Global Warming Potential
◆ Reduced Global Warming Potential
◆ Single component refrigerant: easy to handle
High Efficiency A+++
Hi-Therma offers the most efficient solution for domestic heating and domestic hot water production. The highest energy classification A+++ (in low temperature water conditions) and A++ (at medium temperature) ensures savings on the electricity bill, reducing consumption, with a consequent advantage also on the environmental impact
High Efficiency Twin Rotary Inverter Compressor
High efficiency Twin Rotary DC Inverter compressor. Equipped with unique double pressure chamber design with symmetrical position which can effectively reduce vibration, noise and improve its performance, even in low frequency operation. Low lubricant emission, stable oil return and gas-liquid separator make the system more reliable
1. High efficiency electric motor Optimized electric motor design to increase compressor performance
2. Optimized rotor design Lowering the center of gravity of the compressor significantly reduces vibration and noise
3. Comprehensive mechanism design Improved volumetric efficiency and overall performance
4. Screw fixing Improve the fixing effect and reduce the deformation of the core
Simplified installation
The monobloc Hi-Therma unit allows for easy installation with no need for refrigerant piping work or additional refrigerant. It only needs the connections on the pipes towards the internal system
Main hydraulic components
Insulated plate heat exchanger
Expansion vessel
Very high head DC circulator, flow rate reading on command
Wide Operating Range
Heating operation is guaranteed up to external temperatures of -25°C, therefore it is able to satisfy the user even in very harsh areas and can produce delivery water up to 60°C. In DHW mode it can operate up to an external 46°C and produce hot water inside the boiler up to 55°C, 75°C with the aid of an electric resistance.
Management of External Heat Sources
Hi-Therma can intelligently manage multiple supplementary heat sources: electric resistance for heating, electric resistance in the DHW tank, third-party boiler, solar thermal system
Smart Grids
The Hi-Therma system can be integrated with a photovoltaic system in order to optimize the self-consumption of the energy produced, thus reducing the energy requirement from the electricity grid
Double Thermal Zone
By managing two circuits with water at different temperatures, Hi-Therma adapts to the characteristics of the different terminals present in the system, thus responding to the needs of both new buildings and renovations
Sound Reduction Low Noise Mode
For optimal user comfort, the system can operate at low sound emission with a simple touch on the control, or via remote external input. Maximum reduction in this mode 8 dB(A).
Night mode
By means of night mode the period of low noise operation can be programmed according to the needs of the users. Sound pressure can be reduced up to 35dB(A)
Up to 7 indoor environments with independent temperature control
With the Hi-Therma system, up to 7 ambient temperatures can be managed independently through the installation of optional accessories: wall sensors, maximum 6, or thermostats, maximum 2.
Hi-Therma can also manage swimming pool heating with a specially dedicated mode. Once this function is activated, the hot water can be sent to a heat exchanger allowing the tub to be heated and kept at a comfortable temperature between 24 and 33 ℃
Screed drying
Hi-Therma is equipped with an automatic program for drying the radiant floor screed of a house under construction or renovation. The drying process takes 7 days. In the first three days the system works with water temperature at 25℃ and in the following four days with maximum outlet water temperature set by controller
Standard Color Touch Remote Control for Monobloc, optional for Split version
Sliding Screens Swiping the screen left and right quickly navigates between the different interfaces
◆ Elegant design
◆ Compact (90×90mm)
◆ Intuitive and touch screen
General characteristics
◆ Setup wizard for commissioning.
◆ 10 languages, including Italian.
◆ View energy consumption and capacity.
◆ Water temperature control of the circuits and individual control of the room temperature.
◆ Alarm code and advanced parameter display; useful for maintenance.
◆ Weekly timer and holiday mode.
◆ ECO/Silent/Night mode suitable for different user needs.
◆ Physical button for on/off and reset
Slide adjustment
The temperature can be adjusted quickly by sliding the semicircle, especially for large variation ranges. The lower physical button (on/off and reset) does not affect the aesthetics thanks to its lateral positioning
Theme setting
Three different themes, day, night and auto, can be applied to different scenarios at different times, giving you a more user-friendly and personalized interface view
Easy installation
In designing the control we have given great importance to practicality and ease of installation. Thanks to the rear anchoring panel, assembly and disassembly is very quick
Room thermostat
The optional thermostat allows you to set both room temperature and to manage the most useful control parameters on the indoor unit. It allows you to adjust the room temperature precisely and in real time, ensuring high comfort and energy savings. It is possible to connect up to 2 thermostats per unit
Features HSXE-VC04
◆ Elegant design
◆ Flat shape for easy wall installation
◆ Compact (86×86mm)
◆ Intuitive control via touch buttons
◆ Room temperature and DHW set
◆ ECO/DHW/Timer (0.5-24 hours)
One button for DHW
Users can access the domestic hot water mode setting with one touch and also manage the main circuit settings
Remote Management Via App
Thanks to the optional Hi-Mit II interface it is possible to manage and monitor the system remotely. Connected Hi-Mit II to the LAN cable or to the WiFi router, users can manage the system anytime and anywhere, using the appropriate App from their smartphone
Simple configuration and use
◆ Up to 64 managed drives
◆ Up to 32 users
◆ Consumption management
◆ Faults
◆ On/Off
◆ Circuit/room/DHW temperatures
◆ 14 languages, including Italian
◆ Multiple scenarios that can be set
Energy management
Hi-Mit allows intelligent energy management, thanks to the display of readings divided by day, week or month. Being able to set also the low consumption mode can further increase the energy saving of the system
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS.
First start included
Technical features
Indoor Unit Catalog Code : AHM-080HCDSAA
Outdoor Unit Catalog Code: AHW-080HCDS1
Command Included
Optional commands
Wi-Fi interface : HCCS-H64H2C1M
Temperature sensor : HTS-E1000A1
Energy efficiency
SEER: 5.83
SCOP: 3.42
Energy efficiency class: A+++/A++
Performance
Rated capacity in heating : 8.0 ~ 11.0 kW
Rated capacity in cooling : 7.2 ~ 9.1 kW
Water flow rate : 0.60 ~ 1.90 m 3 /h
Indoor unit sound pressure : 28 dB(A)
Outdoor unit sound pressure : 47 ~ 50 dB(A)
Indoor unit sound power : 42 dB(A)
External unit sound power : 64 dB(A)
Electrical data
Power supply (V,Hz, Ø) : 220~240/50/1
Refrigerant gas : R-32
Operating range
- Cooling: 5° ~ 46° Cbs
- Heating: -25° ~ 35° Cbs
- DHW : -25° ~ 40° Cbs
Installation data
Liquid piping diameter : 6.35 mm (1/4")
Gas pipe diameter: 12.70 (1/2")
Maximum piping length : 45~50 m
Maximum difference in height indoor unit / outdoor unit: 30 m
Dimensions and weight
Internal unit dimensions (HxWxD): 890x520x320 mm
Outdoor unit weight: 44.5 Kg
External unit dimensions (HxWxD): 750x900x340 mm
Outdoor unit weight: 50.5 Kg
Hisense Hi-Therma heat pump
Hi-Therma monoblock is an air-water heat pump system with indoor and outdoor units combined in a single module positioned outdoors and to which the water pipes to the system are directly connected. It is therefore not necessary to carry out work on the refrigerant pipes, considerably simplifying the installation, allowing the same also to non-certified technicians and thus avoiding the registration practices on the F-gas electronic register. The unit is equipped with a heat exchanger, water circulator, expansion tank and all the main functional and safety hydraulic components.
High Efficiency and Excellent Performance Ecological R32 Refrigerant
The R32 refrigerant contributes to the achievement of the objectives of the F-gas regulation as described in the EU regulation 517/2014. Hisense Hi-Therma heat pump system adopts R32 refrigerant, which is a perfect solution to meet European targets on maximum CO 2 emissions
Characteristics
◆ Zero Ozone Impact Potential
◆ Reduced Global Warming Potential
◆ Reduced Global Warming Potential
◆ Single component refrigerant: easy to handle
High Efficiency A+++
Hi-Therma offers the most efficient solution for domestic heating and domestic hot water production. The highest energy classification A+++ (in low temperature water conditions) and A++ (at medium temperature) ensures savings on the electricity bill, reducing consumption, with a consequent advantage also on the environmental impact
High Efficiency Twin Rotary Inverter Compressor
High efficiency Twin Rotary DC Inverter compressor. Equipped with unique double pressure chamber design with symmetrical position which can effectively reduce vibration, noise and improve its performance, even in low frequency operation. Low lubricant emission, stable oil return and gas-liquid separator make the system more reliable
1. High efficiency electric motor Optimized electric motor design to increase compressor performance
2. Optimized rotor design Lowering the center of gravity of the compressor significantly reduces vibration and noise
3. Comprehensive mechanism design Improved volumetric efficiency and overall performance
4. Screw fixing Improve the fixing effect and reduce the deformation of the core
Simplified installation
The monobloc Hi-Therma unit allows for easy installation with no need for refrigerant piping work or additional refrigerant. It only needs the connections on the pipes towards the internal system
Main hydraulic components
Insulated plate heat exchanger
Expansion vessel
Very high head DC circulator, flow rate reading on command
Wide Operating Range
Heating operation is guaranteed up to external temperatures of -25°C, therefore it is able to satisfy the user even in very harsh areas and can produce delivery water up to 60°C. In DHW mode it can operate up to an external 46°C and produce hot water inside the boiler up to 55°C, 75°C with the aid of an electric resistance.
Management of External Heat Sources
Hi-Therma can intelligently manage multiple supplementary heat sources: electric resistance for heating, electric resistance in the DHW tank, third-party boiler, solar thermal system
Smart Grids
The Hi-Therma system can be integrated with a photovoltaic system in order to optimize the self-consumption of the energy produced, thus reducing the energy requirement from the electricity grid
Double Thermal Zone
By managing two circuits with water at different temperatures, Hi-Therma adapts to the characteristics of the different terminals present in the system, thus responding to the needs of both new buildings and renovations
Sound Reduction Low Noise Mode
For optimal user comfort, the system can operate at low sound emission with a simple touch on the control, or via remote external input. Maximum reduction in this mode 8 dB(A).
Night mode
By means of night mode the period of low noise operation can be programmed according to the needs of the users. Sound pressure can be reduced up to 35dB(A)
Up to 7 indoor environments with independent temperature control
With the Hi-Therma system, up to 7 ambient temperatures can be managed independently through the installation of optional accessories: wall sensors, maximum 6, or thermostats, maximum 2.
Hi-Therma can also manage swimming pool heating with a specially dedicated mode. Once this function is activated, the hot water can be sent to a heat exchanger allowing the tub to be heated and kept at a comfortable temperature between 24 and 33 ℃
Screed drying
Hi-Therma is equipped with an automatic program for drying the radiant floor screed of a house under construction or renovation. The drying process takes 7 days. In the first three days the system works with water temperature at 25℃ and in the following four days with maximum outlet water temperature set by controller
Standard Color Touch Remote Control for Monobloc, optional for Split version
Sliding Screens Swiping the screen left and right quickly navigates between the different interfaces
◆ Elegant design
◆ Compact (90×90mm)
◆ Intuitive and touch screen
General characteristics
◆ Setup wizard for commissioning.
◆ 10 languages, including Italian.
◆ View energy consumption and capacity.
◆ Water temperature control of the circuits and individual control of the room temperature.
◆ Alarm code and advanced parameter display; useful for maintenance.
◆ Weekly timer and holiday mode.
◆ ECO/Silent/Night mode suitable for different user needs.
◆ Physical button for on/off and reset
Slide adjustment
The temperature can be adjusted quickly by sliding the semicircle, especially for large variation ranges. The lower physical button (on/off and reset) does not affect the aesthetics thanks to its lateral positioning
Theme setting
Three different themes, day, night and auto, can be applied to different scenarios at different times, giving you a more user-friendly and personalized interface display
Easy installation
In designing the control we have given great importance to practicality and ease of installation. Thanks to the rear anchoring panel, assembly and disassembly is very quick
Room thermostat
The optional thermostat allows you to set both room temperature and to manage the most useful control parameters on the indoor unit. It allows you to adjust the room temperature precisely and in real time, ensuring high comfort and energy savings. It is possible to connect up to 2 thermostats per unit
Features HSXE-VC04
◆ Elegant design
◆ Flat shape for easy wall installation
◆ Compact (86×86mm)
◆ Intuitive control via touch buttons
◆ Room temperature and DHW set
◆ ECO/DHW/Timer (0.5-24 hours)
One button for DHW
Users can access the domestic hot water mode setting with one touch and also manage the main circuit settings
Remote Management Via App
Thanks to the optional Hi-Mit II interface it is possible to manage and monitor the system remotely. Connected Hi-Mit II to the LAN cable or to the WiFi router, users can manage the system anytime and anywhere, using the appropriate App from their smartphone
Simple configuration and use
◆ Up to 64 managed drives
◆ Up to 32 users
◆ Consumption management
◆ Faults
◆ On/Off
◆ Circuit/room/DHW temperatures
◆ 14 languages, including Italian
◆ Multiple scenarios that can be set
Energy management
Hi-Mit allows intelligent energy management, thanks to the display of readings divided by day, week or month. Being able to set also the low consumption mode can further increase the energy saving of the system
Hi-Therma indoor unit
Hi-Therma Split is an air-water heat pump system with separate hydronic module, connected to the outdoor unit via refrigerant pipes and housed inside the building, therefore protected from atmospheric agents and any water freezing phenomena in the harsher periods. This internal module is equipped with a heat exchanger, water circulator, expansion vessel and all the main functional and safety hydraulic components
Elegant appearance
Compact and functional design
Integrated control
Intuitive control interfaces Easy installation
Facilitated maintenance
The position of the components in the indoor unit has been completely optimised. The electrical panel can be rotated 88° facilitating maintenance of the rear parts. Furthermore, the control on the machine can be easily extracted from the front panel and, thanks to a special anchoring system, hung on the electrical box to further facilitate maintenance operations
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS.
First start included
Technical features
Model : AHZ-080HCDS1
Command Included
Optional commands
Wi-Fi interface : HCCS-H64H2C1M
Temperature sensor : HTS-E1000A1
Energy efficiency
SEER: 5.83
SCOP : 3.50
Energy efficiency class: A+++/A++
Performance
Rated capacity in heating : 8.0 ~ 11.0 kW
Rated capacity in cooling : 7.2 ~ 9.1 kW
Air flow rate : 2700 m 3 /h
Water flow rate : 0.60 ~ 1.90 m 3 /h
Sound Pressure : 47 ~ 50dB(A)
Sound power : 61 ~ 64 dB(A)
Electrical data
Power supply (V,Hz, Ø) : 220~240/50/1
Refrigerant gas : R-32
Operating range
- Cooling: 5° ~ 46° Cbs
- Heating: -25° ~ 35° Cbs
- DHW : -25° ~ 40° Cbs
Installation data
Gate valves diameter: G 1” - G 1” (male)
Inlet / outlet piping diameter: G 1” / G 1” (female)
Dimensions and weight
Dimensions (HxWxD): 815x1270x340 mm
Weight : 88Kg
Hisense Hi-Therma heat pump
Hi-Therma monoblock is an air-water heat pump system with indoor and outdoor units combined in a single module positioned outdoors and to which the water pipes to the system are directly connected. It is therefore not necessary to carry out work on the refrigerant pipes, considerably simplifying the installation, allowing the same also to non-certified technicians and thus avoiding the registration practices on the F-gas electronic register. The unit is equipped with a heat exchanger, water circulator, expansion tank and all the main functional and safety hydraulic components.
High Efficiency and Excellent Performance Ecological R32 Refrigerant
The R32 refrigerant contributes to the achievement of the objectives of the F-gas regulation as described in the EU regulation 517/2014. Hisense Hi-Therma heat pump system adopts R32 refrigerant, which is a perfect solution to meet European targets on maximum CO 2 emissions
Characteristics
◆ Zero Ozone Impact Potential
◆ Reduced Global Warming Potential
◆ Reduced Global Warming Potential
◆ Single component refrigerant: easy to handle
High Efficiency A+++
Hi-Therma offers the most efficient solution for domestic heating and domestic hot water production. The highest energy classification A+++ (in low temperature water conditions) and A++ (at medium temperature) ensures savings on the electricity bill, reducing consumption, with a consequent advantage also on the environmental impact
High Efficiency Twin Rotary Inverter Compressor
High efficiency Twin Rotary DC Inverter compressor. Equipped with unique double pressure chamber design with symmetrical position which can effectively reduce vibration, noise and improve its performance, even in low frequency operation. Low lubricant emission, stable oil return and gas-liquid separator make the system more reliable
1. High efficiency electric motor Optimized electric motor design to increase compressor performance
2. Optimized rotor design Lowering the center of gravity of the compressor significantly reduces vibration and noise
3. Comprehensive mechanism design Improved volumetric efficiency and overall performance
4. Screw fixing Improve the fixing effect and reduce the deformation of the core
Simplified installation
The monobloc Hi-Therma unit allows for easy installation with no need for refrigerant piping work or additional refrigerant. It only needs the connections on the pipes towards the internal system
Main hydraulic components
Insulated plate heat exchanger
Expansion tank
Very high head DC circulator, flow rate reading on command
Wide Operating Range
Heating operation is guaranteed up to external temperatures of -25°C, therefore it is able to satisfy the user even in very harsh areas and can produce delivery water up to 60°C. In DHW mode it can operate up to an external 46°C and produce hot water inside the boiler up to 55°C, 75°C with the aid of an electric resistance.
Management of External Heat Sources
Hi-Therma can intelligently manage multiple supplementary heat sources: electric resistance for heating, electric resistance in the DHW tank, third-party boiler, solar thermal system
Smart Grids
The Hi-Therma system can be integrated with a photovoltaic system in order to optimize the self-consumption of the energy produced, thus reducing the energy requirement from the electricity grid
Double Thermal Zone
By managing two circuits with water at different temperatures, Hi-Therma adapts to the characteristics of the different terminals present in the system, thus responding to the needs of both new buildings and renovations
Sound Reduction Low Noise Mode
For optimal user comfort, the system can operate at low sound emission with a simple touch on the control, or via remote external input. Maximum reduction in this mode 8 dB(A).
Night mode
By means of night mode the period of low noise operation can be programmed according to the needs of the users. Sound pressure can be reduced up to 35dB(A)
Up to 7 indoor environments with independent temperature control
With the Hi-Therma system, up to 7 ambient temperatures can be managed independently through the installation of optional accessories: wall sensors, maximum 6, or thermostats, maximum 2.
Hi-Therma can also manage swimming pool heating with a specially dedicated mode. Once this function is activated, the hot water can be sent to a heat exchanger allowing the tub to be heated and kept at a comfortable temperature between 24 and 33 ℃
Screed drying
Hi-Therma is equipped with an automatic program for drying the radiant floor screed of a house under construction or renovation. The drying process takes 7 days. In the first three days the system works with water temperature at 25℃ and in the following four days with maximum outlet water temperature set by controller
Standard Color Touch Remote Control for Monobloc, optional for Split version
Sliding Screens Swiping the screen left and right quickly navigates between the different interfaces
◆ Elegant design
◆ Compact (90×90mm)
◆ Intuitive and touch screen
General characteristics
◆ Setup wizard for commissioning.
◆ 10 languages, including Italian.
◆ View energy consumption and capacity.
◆ Water temperature control of the circuits and individual control of the room temperature.
◆ Alarm code and advanced parameter display; useful for maintenance.
◆ Weekly timer and holiday mode.
◆ ECO/Silent/Night mode suitable for different user needs.
◆ Physical button for on/off and reset
Slide adjustment
The temperature can be adjusted quickly by sliding the semicircle, especially for large variation ranges. The lower physical button (on/off and reset) does not affect the aesthetics thanks to its lateral positioning
Theme setting
Three different themes, day, night and auto, can be applied to different scenarios at different times, giving you a more user-friendly and personalized interface view
Easy installation
In designing the control we have given great importance to practicality and ease of installation. Thanks to the rear anchoring panel, assembly and disassembly is very quick
Room thermostat
The optional thermostat allows you to set both room temperature and to manage the most useful control parameters on the indoor unit. It allows you to adjust the room temperature precisely and in real time, ensuring high comfort and energy savings. It is possible to connect up to 2 thermostats per unit
Features HSXE-VC04
◆ Elegant design
◆ Flat shape for easy wall installation
◆ Compact (86×86mm)
◆ Intuitive control via touch buttons
◆ Room temperature and DHW set
◆ ECO/DHW/Timer (0.5-24 hours)
One button for DHW
Users can access the domestic hot water mode setting with one touch and also manage the main circuit settings
Remote Management Via App
Thanks to the optional Hi-Mit II interface it is possible to manage and monitor the system remotely. Connected Hi-Mit II to the LAN cable or to the WiFi router, users can manage the system anytime and anywhere, using the appropriate App from their smartphone
Simple configuration and use
◆ Up to 64 managed drives
◆ Up to 32 users
◆ Consumption management
◆ Faults
◆ On/Off
◆ Circuit/room/DHW temperatures
◆ 14 languages, including Italian
◆ Multiple scenarios that can be set
Energy management
Hi-Mit allows intelligent energy management, thanks to the display of readings divided by day, week or month. Being able to set also the low consumption mode can further increase the energy saving of the system
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS.
First start included
Technical features
Indoor Unit Catalog Code : AHM-060HCDSAA
Outdoor Unit Catalog Code: AHW-060HCDS1
Command Included
Optional commands
Wi-Fi interface : HCCS-H64H2C1M
Temperature sensor : HTS-E1000A1
Energy efficiency
SEER: 5.85
SCOP: 3.33
Energy efficiency class: A+++/A++
Performance
Nominal capacity in heating : 6.0 ~ 8.0 kW
Rated capacity in cooling : 6.3 ~ 7.6 kW
Water flow rate : 0.60 ~ 1.53 m 3 /h
Indoor unit sound pressure : 28 dB(A)
Outdoor Unit Sound Pressure : 47 ~ 48 dB(A)
Indoor unit sound power : 42 dB(A)
Outdoor unit sound power : 62 dB(A)
Electrical data
Power supply (V,Hz, Ø) : 220~240/50/1
Refrigerant gas : R-32
Operating range
- Cooling: 5° ~ 46° Cbs
- Heating: -25° ~ 35° Cbs
- DHW : -25° ~ 40° Cbs
Installation data
Liquid piping diameter : 6.35 mm (1/4")
Gas pipe diameter: 12.70 (1/2")
Maximum piping length: 40 m
Maximum difference in height indoor unit / outdoor unit: 30 m
Dimensions and weight
Internal unit dimensions (HxWxD): 890x520x320 mm
Weight of outdoor unit: 43.5 Kg
External unit dimensions (HxWxD): 750x900x340 mm
Outdoor unit weight: 49.5 Kg
Hisense Hi-Therma heat pump
Hi-Therma monoblock is an air-water heat pump system with indoor and outdoor units combined in a single module positioned outdoors and to which the water pipes to the system are directly connected. It is therefore not necessary to carry out work on the refrigerant pipes, considerably simplifying the installation, allowing the same also to non-certified technicians and thus avoiding the registration practices on the F-gas electronic register. The unit is equipped with a heat exchanger, water circulator, expansion tank and all the main functional and safety hydraulic components.
High Efficiency and Excellent Performance Ecological R32 Refrigerant
The R32 refrigerant contributes to the achievement of the objectives of the F-gas regulation as described in the EU regulation 517/2014. Hisense Hi-Therma heat pump system adopts R32 refrigerant, which is a perfect solution to meet European targets on maximum CO 2 emissions
Characteristics
◆ Zero Ozone Impact Potential
◆ Reduced Global Warming Potential
◆ Reduced Global Warming Potential
◆ Single component refrigerant: easy to handle
High Efficiency A+++
Hi-Therma offers the most efficient solution for domestic heating and domestic hot water production. The highest energy classification A+++ (in low temperature water conditions) and A++ (at medium temperature) ensures savings on the electricity bill, reducing consumption, with a consequent advantage also on the environmental impact
High Efficiency Twin Rotary Inverter Compressor
High efficiency Twin Rotary DC Inverter compressor. Equipped with unique double pressure chamber design with symmetrical position which can effectively reduce vibration, noise and improve its performance, even in low frequency operation. Low lubricant emission, stable oil return and gas-liquid separator make the system more reliable
1. High efficiency electric motor Optimized electric motor design to increase compressor performance
2. Optimized rotor design Lowering the center of gravity of the compressor significantly reduces vibration and noise
3. Comprehensive mechanism design Improved volumetric efficiency and overall performance
4. Screw fixing Improve the fixing effect and reduce the deformation of the core
Simplified installation
The monobloc Hi-Therma unit allows for easy installation with no need for refrigerant piping work or additional refrigerant. It only needs the connections on the pipes towards the internal system
Main hydraulic components
Insulated plate heat exchanger
Expansion tank
Very high head DC circulator, flow rate reading on command
Wide Operating Range
Heating operation is guaranteed up to external temperatures of -25°C, therefore it is able to satisfy the user even in very harsh areas and can produce delivery water up to 60°C. In DHW mode it can operate up to an external 46°C and produce hot water inside the boiler up to 55°C, 75°C with the aid of an electric resistance.
Management of External Heat Sources
Hi-Therma can intelligently manage multiple supplementary heat sources: electric resistance for heating, electric resistance in the DHW tank, third-party boiler, solar thermal system
Smart Grids
The Hi-Therma system can be integrated with a photovoltaic system in order to optimize the self-consumption of the energy produced, thus reducing the energy requirement from the electricity grid
Double Thermal Zone
By managing two circuits with water at different temperatures, Hi-Therma adapts to the characteristics of the different terminals present in the system, thus responding to the needs of both new buildings and renovations
Sound Reduction Low Noise Mode
For optimal user comfort, the system can operate at low sound emission with a simple touch on the control, or via remote external input. Maximum reduction in this mode 8 dB(A).
Night mode
By means of night mode the period of low noise operation can be programmed according to the needs of the users. Sound pressure can be reduced up to 35dB(A)
Up to 7 indoor environments with independent temperature control
With the Hi-Therma system, up to 7 ambient temperatures can be managed independently through the installation of optional accessories: wall sensors, maximum 6, or thermostats, maximum 2.
Hi-Therma can also manage swimming pool heating with a specially dedicated mode. Once this function is activated, the hot water can be sent to a heat exchanger allowing the tub to be heated and kept at a comfortable temperature between 24 and 33 ℃
Screed drying
Hi-Therma is equipped with an automatic program for drying the radiant floor screed of a house under construction or renovation. The drying process takes 7 days. In the first three days the system works with water temperature at 25℃ and in the following four days with maximum outlet water temperature set by controller
Standard Color Touch Remote Control for Monobloc, optional for Split version
Sliding Screens Swiping the screen left and right quickly navigates between the different interfaces
◆ Elegant design
◆ Compact (90×90mm)
◆ Intuitive and touch screen
General characteristics
◆ Setup wizard for commissioning.
◆ 10 languages, including Italian.
◆ View energy consumption and capacity.
◆ Water temperature control of the circuits and individual control of the room temperature.
◆ Alarm code and advanced parameter display; useful for maintenance.
◆ Weekly timer and holiday mode.
◆ ECO/Silent/Night mode suitable for different user needs.
◆ Physical button for on/off and reset
Slide adjustment
The temperature can be adjusted quickly by sliding the semicircle, especially for large variation ranges. The lower physical button (on/off and reset) does not affect the aesthetics thanks to its lateral positioning
Theme setting
Three different themes, day, night and auto, can be applied to different scenarios at different times, giving you a more user-friendly and personalized interface view
Easy installation
In designing the control we have given great importance to practicality and ease of installation. Thanks to the rear anchoring panel, assembly and disassembly is very quick
Room thermostat
The optional thermostat allows you to set both room temperature and to manage the most useful control parameters on the indoor unit. It allows you to adjust the room temperature precisely and in real time, ensuring high comfort and energy savings. It is possible to connect up to 2 thermostats per unit
Features HSXE-VC04
◆ Elegant design
◆ Flat shape for easy wall installation
◆ Compact (86×86mm)
◆ Intuitive control via touch buttons
◆ Room temperature and DHW set
◆ ECO/DHW/Timer (0.5-24 hours)
One button for DHW
Users can access the domestic hot water mode setting with one touch and also manage the main circuit settings
Remote Management Via App
Thanks to the optional Hi-Mit II interface it is possible to manage and monitor the system remotely. Connected Hi-Mit II to the LAN cable or to the WiFi router, users can manage the system anytime and anywhere, using the appropriate App from their smartphone
Simple configuration and use
◆ Up to 64 managed drives
◆ Up to 32 users
◆ Consumption management
◆ Faults
◆ On/Off
◆ Circuit/room/DHW temperatures
◆ 14 languages, including Italian
◆ Multiple scenarios that can be set
Energy management
Hi-Mit allows intelligent energy management, thanks to the display of readings divided by day, week or month. Being able to set also the low consumption mode can further increase the energy saving of the system
Hi-Therma indoor unit
Hi-Therma Split is an air-water heat pump system with separate hydronic module, connected to the outdoor unit via refrigerant pipes and housed inside the building, therefore protected from atmospheric agents and any water freezing phenomena in the harsher periods. This internal module is equipped with a heat exchanger, water circulator, expansion vessel and all the main functional and safety hydraulic components
Elegant appearance
Compact and functional design
Integrated control
Intuitive control interfaces Easy installation
Facilitated maintenance
The position of the components in the indoor unit has been completely optimised. The electrical panel can be rotated 88° facilitating maintenance of the rear parts. Furthermore, the control on the machine can be easily extracted from the front panel and, thanks to a special anchoring system, hung on the electrical box to further facilitate maintenance operations
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
Pastiglie 200gr a lento scioglimento (acido tricloroisocianuro) a TRIPLA AZIONESono in grado di aumentare lentamente ma regolarmente il tasso di cloro, in modo da ossidare i microorganismi (batteri, funghi, alghe) presenti nella piscina, esplicando un'azione antialghe e flocculante, garantendo quindi la limpidezza dell'acquaDa utilizzare principalmente in piscine a struttura "plastica"Quantità 5kgMade in Italy
Mantieni pulita a lungo l'acqua della tua vasca idromassaggio gonfiabile con questo set di 6 cartucce filtranti. Filtrano in modo efficace e trattengono tutte le impurità, per offrirti un'acqua sempre pulita e preservare il funzionamento della tua jacuzzi da esterno.Caratteristiche- Set da 6 cartucce filtranti per vasca idromassaggio da esterno gonfiabile - Adatte per filtrare le impurità nell'acqua, evitano che entrino nel motore della vasca- Realizzate in TNT per catturare più efficacemente le impurità- La struttura piegata offre un'ampia area di filtrazioneDati tecnici- Colore: Blu, Bianco- Materiale: PP, TNT- Dimensioni generali: ?10 x 8Acm- Diametro interno: ?6cm
Bestway Kit pulizia 58234
Adatto per impianti di filtraggio con una potenza di almeno 2.006 l/h
Incluso nel set
1 retino con robusto rivestimento in rete
1 spazzola aspirante
1 manico telescopico in alluminio leggero per retino e spazzola di aspirazione (lunghezza: 279 cm, diametro 30 mm)
1 tubo per spazzola di aspirazione (diametro 32 mm/lunghezza totale 750 mm. ) con 2 diversi adattatori per l'interno della piscina
Possibilità di collegamento diretto agli impianti di filtraggio con connettori da 32 mm.
Prepara la crema solare, una bibita fresca e rilassati sotto al sole con il tuo lettino sdraio . Costruito in metallo e tessuto Oxford, è resistente e robusto: perfetto da usare in giardino, al mare o a bordo piscina. Puoi regolare lo schienale su due livelli e trasformare la tua sdraio in una chaise longue, ideale per leggere un libro sorseggiando la tua bibita fresca, o in un lettino, perfetto per prendere il sole in totale relax.Caratteristiche- Lettino prendisole pieghevole da giardino, mare o piscina - Telaio in metallo e seduta in tessuto Oxford con finitura in PVC, facile da pulire e resistente - Schienale reclinabile per trasformare la sdraio in un lettino o in una chaise longue - Cuscino poggiatesta imbottito e rimovibileDati tecnici- Colore: Nero - Materiali: Metallo, Oxford - Dimensioni generali: 135L x 60P x 89Acm - Dimensioni da sdraiata: 178L x 60P x 29Acm - Dimensioni da piegata: 97L x 60.5P x 12Acm - Dimensioni seduta (sedia): 47L x 50P x 45Acm - Dimensioni schienale (sedia): 75L x 47Pcm - Dimensioni poggiapiedi (sedia): 56L x 47Pcm - Dimensioni cuscino: 38L x 13P x 6Acm - Altezza parte anteriore (lettino): 23cm - Altezza schienale (lettino): 29cm - Altezza regolabile su 2 Livelli: 29cm (più basso), 89cm (più alto) - Carico massimo: 136kg