Search results for "Piscine"
Zep Zep Foaming Spray Detergent For Air Conditioners Foaming Coil Cleaner New 600/800 Ml
Technical features Product Name : Foaming Coil Cleaner New Item number : T75 Form : Foaming Aerosol White color Smell : Citrus VOC : 7% Flash point : < 0°C Danger of explosion : Not explosive Self-ignition : Non self-igniting product Vapor pressure at 20°C : 23 hPa Density at 20° C : 1.00871 g/cm³ Miscibility with water: Poorly and/or not miscible pH values at 20°C : 12.6 Solvent content : 4.0% "Large" format aerosol volumes: 800 ml gross (600 ml net) Active Ingredients: Butane, Propane, Tetrasodium Ethylenediaminetetraacetate Classification according to EEC directives: The product is classified and coded in accordance with EEC directives/regulations on dangerous substances 67/548/EEC, 199/45/EC and subsequent amendments and additions (Regulation (EC) 1907/2006 REACH) ZEP ITALY ZEP ITALIA is the Italian branch of ZEP Inc. which has been a leader in the production of chemical auxiliaries for civil and industrial maintenance since 1937 with its historical headquarters in Atlanta - Georgia, USA - and with various branches all over the world. Every day in many countries more than 300,000 satisfied customers use the over 4,000 products in the Zep line to make their work easier. ZEP maintenance products are chemical formulations intended for the most diverse professional needs in the fields of INDUSTRY, WATER TREATMENT, FOOD INDUSTRY, HOTEL SECTOR, SWIMMING POOLS, RESTAURANTS and GENERAL MAINTENANCE. FOAMING COIL CLEANER Aerosol for cleaning air conditioner batteries Eliminates dust, grease, dirt in general, improving the thermal exchange of the batteries. The jet of foam penetrates deeply, improving the cleaning effect. No need to rinse. Contents 800/600ml. CHARACTERISTICS Super penetrating : The foam produced adheres perfectly to even vertical surfaces, penetrating deeply Safe : Does not attack the treated surfaces Improve system performance: Optimize system performance while maintaining maximum heat exchange efficiency ACTIVE INGREDIENTS Degreasing agents Solubilizing agents METHOD OF USE Spray the product on the surface to be treated. Wait a few minutes and rinse. During the summer, rinsing can be avoided by leaving the washing action to the condensate. Foaming Coil Cleaner can be applied holding the aerosol upright or upside down COMPATIBILITY Safe on any type of surface PRECAUTIONS FOR USE For more information, see the safety documentation Pressurized vessel Protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use Keep out of reach of children Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€14,00
Grundfos Grundfos Horizontal Multistage Centrifugal Pump Model Cm 3-5 From 0.75 Hp Single-Phase
Technical features Model : CM 3-5 Voltage : 1 x 220-240V Flow rate : 4 m3 / h Head : 20.6 m Power : 0.50kW / 0.75kW Suction : Rp 1" Send : Rp 1" Sound power level : 53 dB(A) Grundfos CM-A The two main features of the horizontal multistage CM pump are compactness and modularity, which make different configurations possible. The pump is mainly composed of a series of interchangeable modules, designed to work together for a long time, regardless of the application. CM pumps are equipped with mains powered motors. The CM pump is mainly used as an integrated pump in OEM solutions and in household compressors. It is compact, silent, reliable and flexible and all this makes it an optimal solution for installation and interaction with other components in large systems. It can be installed in systems or used as an independent pump. GRUNDFOS MULTISTAGE SINGLE-PHASE CENTRIFUGAL PUMP SERIES CM3-3 CM is the Grundfos centrifugal electric pump series. Excellent for a wide range of applications, it stands out for its excellent technical characteristics and ease of use. GREAT INSTALLATION AND USE MODULARITY The peculiar feature of the Grundfos CM electric pump is the quality of the components. The shaft, impellers and chambers are in stainless steel, the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The thread is of the Whitworth RP type. The engine is air cooled. The electric pump is equipped with thermal protection with automatic reset for any faults caused by both slow and rapid increases in temperature (constant overload and stall conditions). It is capable of withstanding dry running for short periods. The compact dimensions and the lowered base allow it to be installed even where space is limited. APPLICATIONS The Grundfos centrifugal CM is an electric pump ideal for pressurizing and moving liquids on the surface. There are many applications: washing systems of all kinds, withdrawal from tanks, domestic supply, pressurisation, irrigation, swimming pools, fountains, etc. GUARANTEED SAVINGS AND HIGH COMFORT Grundfos motors are characterized by their high efficiency in relation to low electrical consumption. The savings also materialize in the duration over time due to the high construction quality and the materials used. The shaft, the impellers and the chambers are in stainless steel, the pump body with the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The engine is air cooled. The remarkable reactivity to the demand for water and the silent operation contribute considerably to the efficiency of the product and to the comfort produced both in domestic and professional uses. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase
€346,00
Grundfos Grundfos Horizontal Multistage Centrifugal Pump Model Cm 3-3 From 0.67 Hp Single-Phase
Technical features Model : CM 3-3 Voltage : 1 x 220-240V Flow rate: 3.1 m3 / h Head : 20.6 m Power : 0.50kW / 0.67kW Suction : Rp 1" Send : Rp 1" Sound power level : 53 dB(A) Dimensions Height : 20.8cm Length : 30.4cm Width : 14.1cm Weight : 12.00 Kg Grundfos CM-A The two main features of the horizontal multistage CM pump are compactness and modularity, which make different configurations possible. The pump is mainly composed of a series of interchangeable modules, designed to work together for a long time, regardless of the application. CM pumps are equipped with mains powered motors. The CM pump is mainly used as an integrated pump in OEM solutions and in household compressors. It is compact, silent, reliable and flexible and all this makes it an optimal solution for installation and interaction with other components in large systems. It can be installed in systems or used as an independent pump. GRUNDFOS MULTISTAGE SINGLE-PHASE CENTRIFUGAL PUMP CM3-3 SERIES CM is the Grundfos centrifugal electric pump series. Excellent for a wide range of applications, it stands out for its excellent technical characteristics and ease of use. GREAT INSTALLATION AND USE MODULARITY The peculiar feature of the Grundfos CM electric pump is the quality of the components. The shaft, impellers and chambers are in stainless steel, the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The thread is of the Whitworth RP type. The engine is air cooled. The electric pump is equipped with thermal protection with automatic reset for any faults caused by both slow and rapid increases in temperature (constant overload and stall conditions). It is capable of withstanding dry running for short periods. The compact dimensions and the lowered base allow it to be installed even where space is limited. APPLICATIONS The Grundfos centrifugal CM is an electric pump ideal for pressurizing and moving liquids on the surface. There are many applications: washing systems of all kinds, withdrawal from tanks, domestic supply, pressurisation, irrigation, swimming pools, fountains, etc. GUARANTEED SAVINGS AND HIGH COMFORT Grundfos motors are characterized by their high efficiency in relation to low electrical consumption. The savings also materialize in the duration over time due to the high construction quality and the materials used. The shaft, the impellers and the chambers are in stainless steel, the pump body with the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The engine is air cooled. The remarkable reactivity to the demand for water and the silent operation contribute considerably to the efficiency of the product and to the comfort produced both in domestic and professional uses. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase
€295,00
Grundfos Grundfos Horizontal Multistage Centrifugal Pump Model Cm 3-4 From 0.7 Hp Single-Phase
Technical features Model : CM 3-4 Voltage : 1 x 220-240V Flow rate : 4 m3 / h Head : 36 m Power : 0.50kW / 0.7kW Suction : Rp 1" Send : Rp 1" Sound power level : 53 dB(A) Dimensions Height : 20.8cm Length : 30.4cm Width : 14.1cm Weight : 12.00 Kg Grundfos CM-A The two main features of the horizontal multistage CM pump are compactness and modularity, which make different configurations possible. The pump is mainly composed of a series of interchangeable modules, designed to work together for a long time, regardless of the application. CM pumps are equipped with mains powered motors. The CM pump is mainly used as an integrated pump in OEM solutions and in household compressors. It is compact, silent, reliable and flexible and all this makes it an optimal solution for installation and interaction with other components in large systems. It can be installed in systems or used as an independent pump. GRUNDFOS MULTISTAGE SINGLE-PHASE CENTRIFUGAL PUMP CM 3-4 SERIES CM is the Grundfos centrifugal electric pump series. Excellent for a wide range of applications, it stands out for its excellent technical characteristics and ease of use. GREAT INSTALLATION AND USE MODULARITY The peculiar feature of the Grundfos CM electric pump is the quality of the components. The shaft, impellers and chambers are in stainless steel, the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The thread is of the Whitworth RP type. The engine is air cooled. The electric pump is equipped with thermal protection with automatic reset for any faults caused by both slow and rapid increases in temperature (constant overload and stall conditions). It is capable of withstanding dry running for short periods. The compact dimensions and the lowered base allow it to be installed even where space is limited. APPLICATIONS The Grundfos centrifugal CM is an electric pump ideal for pressurizing and moving liquids on the surface. There are many applications: washing systems of all kinds, withdrawal from tanks, domestic supply, pressurisation, irrigation, swimming pools, fountains, etc. GUARANTEED SAVINGS AND HIGH COMFORT Grundfos motors are characterized by their high efficiency in relation to low electrical consumption. The savings also materialize in the duration over time due to the high construction quality and the materials used. The shaft, the impellers and the chambers are in stainless steel, the pump body with the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The engine is air cooled. The remarkable reactivity to the demand for water and the silent operation contribute considerably to the efficiency of the product and to the comfort produced both in domestic and professional uses. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase
€315,00
Grundfos Grundfos Single-Stage Submersible Drainage Pump Model Unilift Cc 7 A1 From 0.51 Kw
Technical features Model : UNILIFT CC 7 A1 Mouth size ; G 1 1/4 Power : 0.38 kW / 0.51 HP Intensity : 1.80A Cable : 10m UNILIFT CC The Unilift CC pump is a single stage submersible drainage pump designed for pumping drainage water and gray waste water. The Unilift CC pump is capable of drawing water up to a level of 3 mm above the floor, by removing the filter. The Unilift CC pump is suitable for permanent and temporary installations. The Unilift CC pump is equipped with a non-return flapper valve on the discharge port to prevent backflow from the piping. An adapter ensures the right connections to 3/4" or 1 1/4" discharge ports. The filter is made of stainless steel while the main parts of the pump, such as the body and the housing, are made of molded composite materials. The Multibox B-CC7 is a Unilift CC pump combined with further elements such as a tube with Storz coupling, adapter for threaded Storz coupling and a box with perforated mesh sides to be used as a pre-filter for the pump. It is the perfect solution to use as an emergency kit for single family homes in the event of a flood. Applications The Unilift CC pump has been designed for the following pumping: Water and rainwater in agriculture River and lake water Rain and drainage water Water for filling/emptying tanks, ponds, tanks, etc. Effluents from downpours, washing machines and wells below the level of the sewer system Pool water Ditch drainage water Groundwater (lowering applications) Effluents from viaducts, underpasses, etc. Drainage from splinker systems in garages. Features and Benefits Composite materials Stainless steel filter Automatic vent valve on the handle Available with level switch Suitable for low suction levels Compact shape for easy moving and cleaning Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase
€255,00