icon Sime Watertight Chamber Traditional Type Boiler Mod. Uniqa Revolution 24 Kw Low Nox Complete With Fume Exhaust Kit - Erp | CaldaieMurali

Sime Watertight Chamber Traditional Type Boiler Mod. Uniqa Revolution 24 Kw Low Nox Complete With Fume Exhaust Kit - Erp

Description

Traditional Sealed Chamber Sime Boiler mod. UNIQA REVOLUTION 24 kW LOW NOx complete with fume exhaust kit - ErP


  • Nominal thermal power (80-60°C) kW 22.9
  • Minimum thermal power (80-60°C) kW 8.9
  • Nominal heat input in heating kW 24.5
  • Minimum heat input kW 10.0
  • Rated power efficiency (80-60°C) % 93.4
  • Useful efficiency minimum power (80-60°C) % 89.2
  • Useful efficiency 30% of load % 108.8
  • Heating energy efficiency class B
  • Sanitary energy efficiency class A
  • Seasonal heating energy efficiency % 86
  • XL loading sanitary profile
  • Heating sound power dB(A) 54
  • Maximum electrical power absorbed W 450
  • Electrical protection degree IP X5D
  • Heating regulation range °C 40÷80
  • Boiler water content l 3.35
  • Max working pressure bar 3
  • Max operating temperature °C 85
  • Expansion tank capacity l 8
  • Expansion vessel pressure bar 1
  • DHW adjustment range °C 10÷60
  • DHW heat input kW 24.5
  • Specific sanitary flow rate ∆t 30°C (EN 13203) l/min 10.6
  • Continuous DHW flow ∆t 25/35°C l/min 12.9/9.2
  • Sanitary minimum flow rate l/min 2
  • Sanitary pressure (max/min) bar 7.0/0.5
  • Smoke temperature max °C 106
  • Flue gas temperature min °C 75
  • Maximum straight length ø 60/100* m 2.5
  • Maximum straight length separated* m 10+10
  • NOx class 6 (‹ 56 mg/kWh)
  • Weight kg 45

UNIQUE REVOLUTION

  • Instantaneous wall mounted boiler with active recuperator
  • Equipped with active heat pump recovery
  • It does not require a condensate drain
  • It is installed with a traditional flue
  • Specific for the replacement of traditional sealed chamber boilers
  • The boiler is equipped with a card that can perform one of the following functions: remote alarm, zone valve control via room thermostat or remote control, boiler loading, recirculation or booster pump control


A UNIQUE, INGENIOUS SOLUTION

The European ErP regulation has changed the rules of the game, defining the minimum requirements to be met for products for space heating and domestic hot water production, in order to significantly reduce CO2 emissions by 2020. According to this regulation, traditional boilers (non-condensing) sealed chamber boilers can no longer be placed on the market starting from September 2015. In this scenario, Sime proposes Uniqa Revolution, the class B boiler, which already complies with the polluting limits of September 2018 and is installed like a boiler traditional, because it does not require flue ducting and condensate drainage.

  • Specific for the replacement of traditional sealed chamber boilers
  • It does not require a condensate drain
  • Use traditional flue
  • Equipped with internal heat pump booster
THE BOILER THAT SOLVES THE PROBLEM

Replacing a traditional boiler with a condensing one can be particularly expensive because it requires the creation of a condensate drain and, in some cases, the ducting of the existing flue, which is not suitable for low temperature fumes. The costs of these interventions are significant and are added to those of the purchase and installation of the generator. Uniqa Revolution is the only product that is installed like a traditional boiler, while meeting the stringent Ecodesign requirements of the ErP legislation.

Uniqa Revolution is equipped with an active recuperator (booster) which raises the efficiency in compliance with ErP requirements. The heat transfer fluid receives heat from the air drawn from the outside and conveyed to the 1st active recovery exchanger. Subsequently, the active recovery exchanger compresses the fluid and transfers the heat to the heating system return water in the 2nd active recovery exchanger. The water then passes through the low NOx burner, reheating further and subsequently into the boiler exchanger.

Product Guarantee
All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Sime Watertight Chamber Traditional Type Boiler Mod. Uniqa Revolution 24 Kw Low Nox Complete With Fume Exhaust Kit - Erp

Product form

Traditional Sealed Chamber Sime Boiler mod. UNIQA REVOLUTION 24 kW LOW NOx complete with fume exhaust kit - ErP Nominal... Read more

€2.247,00 Incl. VAT

    Description

    Traditional Sealed Chamber Sime Boiler mod. UNIQA REVOLUTION 24 kW LOW NOx complete with fume exhaust kit - ErP


    • Nominal thermal power (80-60°C) kW 22.9
    • Minimum thermal power (80-60°C) kW 8.9
    • Nominal heat input in heating kW 24.5
    • Minimum heat input kW 10.0
    • Rated power efficiency (80-60°C) % 93.4
    • Useful efficiency minimum power (80-60°C) % 89.2
    • Useful efficiency 30% of load % 108.8
    • Heating energy efficiency class B
    • Sanitary energy efficiency class A
    • Seasonal heating energy efficiency % 86
    • XL loading sanitary profile
    • Heating sound power dB(A) 54
    • Maximum electrical power absorbed W 450
    • Electrical protection degree IP X5D
    • Heating regulation range °C 40÷80
    • Boiler water content l 3.35
    • Max working pressure bar 3
    • Max operating temperature °C 85
    • Expansion tank capacity l 8
    • Expansion vessel pressure bar 1
    • DHW adjustment range °C 10÷60
    • DHW heat input kW 24.5
    • Specific sanitary flow rate ∆t 30°C (EN 13203) l/min 10.6
    • Continuous DHW flow ∆t 25/35°C l/min 12.9/9.2
    • Sanitary minimum flow rate l/min 2
    • Sanitary pressure (max/min) bar 7.0/0.5
    • Smoke temperature max °C 106
    • Flue gas temperature min °C 75
    • Maximum straight length ø 60/100* m 2.5
    • Maximum straight length separated* m 10+10
    • NOx class 6 (‹ 56 mg/kWh)
    • Weight kg 45

    UNIQUE REVOLUTION

    • Instantaneous wall mounted boiler with active recuperator
    • Equipped with active heat pump recovery
    • It does not require a condensate drain
    • It is installed with a traditional flue
    • Specific for the replacement of traditional sealed chamber boilers
    • The boiler is equipped with a card that can perform one of the following functions: remote alarm, zone valve control via room thermostat or remote control, boiler loading, recirculation or booster pump control


    A UNIQUE, INGENIOUS SOLUTION

    The European ErP regulation has changed the rules of the game, defining the minimum requirements to be met for products for space heating and domestic hot water production, in order to significantly reduce CO2 emissions by 2020. According to this regulation, traditional boilers (non-condensing) sealed chamber boilers can no longer be placed on the market starting from September 2015. In this scenario, Sime proposes Uniqa Revolution, the class B boiler, which already complies with the polluting limits of September 2018 and is installed like a boiler traditional, because it does not require flue ducting and condensate drainage.

    • Specific for the replacement of traditional sealed chamber boilers
    • It does not require a condensate drain
    • Use traditional flue
    • Equipped with internal heat pump booster
    THE BOILER THAT SOLVES THE PROBLEM

    Replacing a traditional boiler with a condensing one can be particularly expensive because it requires the creation of a condensate drain and, in some cases, the ducting of the existing flue, which is not suitable for low temperature fumes. The costs of these interventions are significant and are added to those of the purchase and installation of the generator. Uniqa Revolution is the only product that is installed like a traditional boiler, while meeting the stringent Ecodesign requirements of the ErP legislation.

    Uniqa Revolution is equipped with an active recuperator (booster) which raises the efficiency in compliance with ErP requirements. The heat transfer fluid receives heat from the air drawn from the outside and conveyed to the 1st active recovery exchanger. Subsequently, the active recovery exchanger compresses the fluid and transfers the heat to the heating system return water in the 2nd active recovery exchanger. The water then passes through the low NOx burner, reheating further and subsequently into the boiler exchanger.

    Product Guarantee
    All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 40.0 kg
    • classe energetica produzione acs: A
    • classe energetica riscaldamento: B
    • gas: Methane
    • marca: Syme
    • metri quadri : 120
    • modello: UNIQA Revolution 24
    • potenza in kw: 24
    • potenza nominale: 24
    • superficie riscaldabile mq: 120
    Shipping detailsShipping details

    The order is processed according to the payment method chosen:

    for payments by CREDIT CARD, PAYPAL, MARK, the order is processed the same day. Orders placed before 2.00 pm will be managed on the same day. The BRT or GLS courier will collect the ordered goods from our warehouses the following morning.

    Subsequently, the courier assigns the shipment number (tracking number) and communicates the same to the customer via e-mail, allowing him to follow the delivery status and estimated times in real time on the brt.it or gls-grop.com website. 24-72 the courier will deliver the goods (excluding islands and disadvantaged areas) to the address indicated by the Customer at the time of order confirmation. Transport costs are charged to the customer and are calculated taking into account the volume and/or weight of the ordered item/s. However, product delivery times vary according to the requested item, payment methods and the delivery times chosen by the Customer, which is why the times indicated are merely indicative and cannot be considered binding for Decidiprezzo srl. Orders placed online are delivered throughout Italy, with the exception of Livigno, Campione d'Italia, Vatican City and the Republic of San Marino. In some periods of the year (summer period / Christmas period) the processing times could undergo changes compared to the standard ones declared above.

    NB: In the periods of July and August due to the high amount of orders, delivery times could be delayed

    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Recensioni di CaldaieMurali.it

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account