Overview

RIELLO ACQUAFUN2 14 METHANE WATER HEATER: Open Chamber water heater specifically dedicated to the production of hot water only.

Technical specifications

Product code: 20019746

Energy label specifications according to the European ErP directive

Sanitary energy efficiency: Class A

Load profile: profileL

Characteristics of heating/DHW operation:

Useful power - firebox: 23.7 - 27.2 kW

Efficiency at max power: 87.1%

Open room, natural draught

Min/normal/max pressure bar 0.2/2/10

Camppreliev selector max 40C: 6.7£13.6 l/min

Domestic hot water production: 14 l/min

Dimensions (hxlxp) mm 650 x 363 x 245 ; 12.6 kgs

Power supply: METHANE

Features list

WATERFUN2

Methane gas LPG

Open Room

Automatic battery start

Acquafun Open Chamber water heater for quick and easy installation without electrical connections thanks to battery power supply. It is available in two models: 11 and 14 litres.

Characteristics:

Automatic ignition by battery (1.5 Volt). Get rid of tension problems.

The continuous flame modulation allows the selected temperature to be kept constant as the pressure and water flow vary, optimizing the combination with mechanical and thermostatic mixers.

Economizer device to reduce gas consumption.

Supplied battery (1.5 Volt €«¦ size C €«¦ half torch).

No mains connection required.

The economizer chokes the maximum power by 50% to adapt it to the various installations.

Thanks to its particularly compact dimensions, it can be installed in homes with particularly limited spaces.

ErP: Energy related Products

The new European regulations for heat generators

ErP is the acronym of "Energy related Products" and the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through a eco-design ("eco-design").

The field of action of this European Directive is extremely broad since up to now it has affected products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 they will also apply to heating products for the production of domestic hot water.

Also from the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitory period between the publication of the regulations and their activation throughout the territory of the European Community is necessary to allow the full transposition of the contents by companies and market players.

The energy labeling of products for heating domestic hot water production

The regulations issued require that all products intended for heating and the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class.

Note: the regulation provides for the mandatory presence of the energy label for the introduction of the product from the factories to the market. All the products previously introduced, for example present near distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G.

A new mod to guide the consumer

The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product, to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as products with 4 - Heat Pump Water Heaters, as well as those on air conditioners, the efficiency data reported for the average climatic range.

In addition to the product energy labels, European regulations have also provided for the creation of a system label in the case of creating a plant in which various appliances, components and controls operate.

This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/operates the system (sellers-installers); this faculty was also granted to builders.

Warranty

All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

• peso: 15.0 kg
• classe efficienza energetica: A
• classe energetica: A
• classe energetica produzione acs: A
• gas: Methane
• installazione: VERTICAL
• litri: 14
• marca: Riello
• modello: SCALD_1206 c
• potenza in kw: 14
• tipologia : OPEN ROOM