icon Chaffoteaux Cx Green 29 Eu Methane Condensing Boiler Complete With Fume Exhaust Kit | CaldaieMurali

Chaffoteaux Cx Green 29 Eu Methane Condensing Boiler Complete With Fume Exhaust Kit

Description

Overview

CHAFFOTEAUX CX GREEN 24 EU CONDENSING BOILER COMPLETE WITH METHANE FUME KIT - NEW 2017 MODELÿThe new compact condensing boiler with aluminum alloy condensing exchanger with all the necessary requirements to achieve the required standards in terms of energy savings

Technical specifications

Product code:ÿ3310508

Energy label specifications according to the European ErPÿ directive

ClassÿA heating energy efficiency

Sanitary energy efficiency ClassÿA

Withdrawal profiles: XL

Characteristics of heating/sanitary exercises:

Nominal heat input in heatingmax/min (Hi):ÿ23.5/4.5ÿkW

Nominal heat input in sanitary max/min (Hi):ÿ23.5/4.5ÿkW

Heating max/min thermal power (80øC-60øC):ÿ23/4,4ÿkW

Efficiency at nominal heat input:ÿ97.7 / 88%

Efficiency 30% of nominal heat input:ÿ104.3 / 94 %

Capacity of the expansion vessel: 8 lt

Min/max heating temperature (high temperature range)øC 35/82

Min/max heating temperature (low temperature range)øC 25/45

Sanitary temperature min/maxøC 36/60

Instantaneous quantity of hot water T=25øC l/m 13.9

Instantaneous quantity of hot water T=35øC l/m 9.9

Minimum withdrawal of hot water l/m <2

Electrical data:

Supply Voltage/Frequency V/Hz 230/50ÿ

Total absorbed electrical power W 34ÿ

Electrical protection degrees IP X5D

Main features

CX GREEN EU

The compact condensing boiler with aluminum alloy condensing exchanger and with all the necessary requirements to achieve the required standards in terms of energy savings. Operationssolmethane.

Sanitary comfort

Sanitary heat exchanger in stainless steel.

Domestic water performance: stars **.

Flow rate 13.1 litres/minute with T = 25§C. (24kW)

Heating comfort

Efficiencyfinal 108% with energy savingsfinal 35%.

4 star efficiency of combustion in compliance with the EN92/42 standard.

Modulation range from 25% to 100% of maximum power.

Condensing exchanger in aluminum alloy.

Reduced polluting emissions, NOx class 5.

High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption.

Arrangement for integration into a heating system via the Ebus2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories).

Possibility of managing single-temperature and multi-temperature zones using Expert Control.

Self-diagnosis system by code.

LCD display.

Convenience of installation use

Possibility of connection with external probe.

Compatible with Expert Control, modulatingÿ and on/off accessories.

Easier start-up: automatic purge function and directly accessible combustion adjustment.

Save energy and respect the environment

Final 20% energy savings in combination with chronothermostat external probe.

40% reduction in CO2 emissions**.

All ready for Energy Labeling

What is it about

From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply.

These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction

For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to:

generators with a capacity of less than 400 kW

water heaters with a capacity of less than 400 kW,

kettles with a capacity of less than 2000 litres

or

As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase.

The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015.

It's about me tooÿ

YES, it affects everyone: professionals and end users

The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available.

The user will be able to easily compare the performance of the products.

From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems.

Supplier's responsibility

The company that supplies the product on the market is required to equip its system devices with the following documentation:

product energy label;ÿ

product data sheet;ÿ

system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ

technical data sheet of the system with the parts relating to the products and the system already completed.

Responsibilities of Resellersÿ

First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that:

all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ

all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ

every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class.

The new ErP regulations

ENERGY LABELLING:

Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances.

ECODESIGN (ErP):

The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products.

PRODUCT LABEL

There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible.

SYSTEM LABEL

In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way

Warranty

All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Chaffoteaux Cx Green 29 Eu Methane Condensing Boiler Complete With Fume Exhaust Kit

Product form

Overview CHAFFOTEAUX CX GREEN 24 EU CONDENSING BOILER COMPLETE WITH METHANE FUME KIT - NEW 2017 MODELÿThe new compact condensing... Read more

€922,00 Incl. VAT

    Description

    Overview

    CHAFFOTEAUX CX GREEN 24 EU CONDENSING BOILER COMPLETE WITH METHANE FUME KIT - NEW 2017 MODELÿThe new compact condensing boiler with aluminum alloy condensing exchanger with all the necessary requirements to achieve the required standards in terms of energy savings

    Technical specifications

    Product code:ÿ3310508

    Energy label specifications according to the European ErPÿ directive

    ClassÿA heating energy efficiency

    Sanitary energy efficiency ClassÿA

    Withdrawal profiles: XL

    Characteristics of heating/sanitary exercises:

    Nominal heat input in heatingmax/min (Hi):ÿ23.5/4.5ÿkW

    Nominal heat input in sanitary max/min (Hi):ÿ23.5/4.5ÿkW

    Heating max/min thermal power (80øC-60øC):ÿ23/4,4ÿkW

    Efficiency at nominal heat input:ÿ97.7 / 88%

    Efficiency 30% of nominal heat input:ÿ104.3 / 94 %

    Capacity of the expansion vessel: 8 lt

    Min/max heating temperature (high temperature range)øC 35/82

    Min/max heating temperature (low temperature range)øC 25/45

    Sanitary temperature min/maxøC 36/60

    Instantaneous quantity of hot water T=25øC l/m 13.9

    Instantaneous quantity of hot water T=35øC l/m 9.9

    Minimum withdrawal of hot water l/m <2

    Electrical data:

    Supply Voltage/Frequency V/Hz 230/50ÿ

    Total absorbed electrical power W 34ÿ

    Electrical protection degrees IP X5D

    Main features

    CX GREEN EU

    The compact condensing boiler with aluminum alloy condensing exchanger and with all the necessary requirements to achieve the required standards in terms of energy savings. Operationssolmethane.

    Sanitary comfort

    Sanitary heat exchanger in stainless steel.

    Domestic water performance: stars **.

    Flow rate 13.1 litres/minute with T = 25§C. (24kW)

    Heating comfort

    Efficiencyfinal 108% with energy savingsfinal 35%.

    4 star efficiency of combustion in compliance with the EN92/42 standard.

    Modulation range from 25% to 100% of maximum power.

    Condensing exchanger in aluminum alloy.

    Reduced polluting emissions, NOx class 5.

    High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption.

    Arrangement for integration into a heating system via the Ebus2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories).

    Possibility of managing single-temperature and multi-temperature zones using Expert Control.

    Self-diagnosis system by code.

    LCD display.

    Convenience of installation use

    Possibility of connection with external probe.

    Compatible with Expert Control, modulatingÿ and on/off accessories.

    Easier start-up: automatic purge function and directly accessible combustion adjustment.

    Save energy and respect the environment

    Final 20% energy savings in combination with chronothermostat external probe.

    40% reduction in CO2 emissions**.

    All ready for Energy Labeling

    What is it about

    From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply.

    These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction

    For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to:

    generators with a capacity of less than 400 kW

    water heaters with a capacity of less than 400 kW,

    kettles with a capacity of less than 2000 litres

    or

    As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase.

    The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015.

    It's about me tooÿ

    YES, it affects everyone: professionals and end users

    The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available.

    The user will be able to easily compare the performance of the products.

    From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems.

    Supplier's responsibility

    The company that supplies the product on the market is required to equip its system devices with the following documentation:

    product energy label;ÿ

    product data sheet;ÿ

    system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ

    technical data sheet of the system with the parts relating to the products and the system already completed.

    Responsibilities of Resellersÿ

    First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that:

    all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ

    all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ

    every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class.

    The new ErP regulations

    ENERGY LABELLING:

    Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances.

    ECODESIGN (ErP):

    The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products.

    PRODUCT LABEL

    There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible.

    SYSTEM LABEL

    In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way

    Warranty

    All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 50.0 kg
    • classe energetica produzione acs: A
    • classe energetica riscaldamento: A
    • gas: Methane
    • marca: CHAFFOTEAUX
    • metri quadri : 200
    • modello: CX GREEN 29 METANO
    • potenza in kw: 29
    • potenza nominale: 29
    • superficie riscaldabile mq: 200
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Reviews of CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account