icon Condensing Boiler Beretta Ciao At 25 C Low Nox 20176935 Methane Complete With Smoke Kit | CaldaieMurali

Condensing Boiler Beretta Ciao At 25 C Low Nox 20176935 Methane Complete With Smoke Kit

Description

Beretta CIAO AT 25 C LOW NOx condensing boiler Complete with Fume Kit 20176935 - NEW


Technical specifications according to ErP directives

  • Class B heating energy efficiency
  • Sanitary energy efficiency Class A
  • Sanitary load profile - XL

Technical features:

  • Nominal heat input kW 25.00
  • NOx Class 6.00
  • Total electrical power Watt 102.00
  • IP electrical protection degree IPX5D
  • Expansion vessel capacity 8 litres
  • Maximum pressure bar 8
  • Quantity of hot water with Δt=25°C litres/min 14.3

Dimensions

  • Boiler size (HxLxP) mm 715x405x250

CIAO AT with stainless steel heat exchanger

BERETTA PRESENTS THE NEW CIAO AT, THE SPECIFIC CONDENSING BOILER FOR REPLACING TRADITIONAL HIGH TEMPERATURE SYSTEMS

The new CIAO AT range is proposed in two combined models of 25 kW of power, with methane and LPG respectively. Both models are equipped with DIN standard hydraulic connections, to allow easy replacement of boilers with hydraulic standards other than Beretta. Many new features compared to the previous range. First of all, the new post-exchanger in stainless steel and composite material, which allows it to pre-heat the return water from the primary circuit using the residual heat of the exhaust fumes. The cooled burner, the new electronics and interface, the reduced depth of the boiler which allows installation even in contained recesses, complete the innovative profile of this product, which is preparing to become the reference in the specific segment of the replacement of radiator systems . The simple and linear design, in line with the Beretta style, the compactness of the dimensions and the installation flexibility make CIAO AT easy to integrate into any living environment, both inside homes and outdoors (in partially protected places) or recessed, also through dedicated accessories.

The Technical Characteristics

  • New layout with compact dimensions and low weight (only 31 kg!) to facilitate transport and built-in installation
  • Traditional copper primary exchanger
  • New and robust finned pack post-exchanger in stainless steel with taste and composite material
  • Sanitary plate heat exchanger with possibility of pre-heating
  • Innovative gas-air combustion supervision system
  • Forced draft sealed chamber boiler with cooled low NOx burner
  • Standard automatic by-pass
  • Modulation range 1:3
  • Low consumption circulator (EEI ≤ 0.20), 6 m, with anti-blocking
  • Standard analogue hydrometer
  • Low NOx emissions : CLASS 6 (EN 15502-1)
  • Innovative gas valve regulation procedure
  • Sequence of DIN type hydraulic connections, ideal for replacing products with the same type of connections
  • Maximum installation flexibility: Indoor, outdoor and recessed installation (in a partially protected place)
  • Antifreeze heater kit, hydraulic connections and external probe available as accessories
  • New flue flange with click fit connection: Fast and safe, without the need for an external collar
  • IPX5D electrical protection degree
  • Boiler support template supplied
  • Compatible with BeSmart command
  • Thermostat
  • Dedicated LPG code: for conversion, contact authorized Beretta assistance centres
LOW NOX BURNER

CIAO AT is able to satisfy the most demanding requirements in terms of low emissions, in order to make heating appliances less polluting. Thanks to the innovative burner of CIAO AT, of the hyperstoichiometric type, a very low flame temperature is obtained as an effect. This characteristic, combined with the cooling of the burner through the heating circuit water, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by the legislation with flying colors ( EU Regulation 814/2013).

NEW INTERFACE

The new CIAO AT digital interface, designed with particular attention to ease of use, is equipped with a modern backlit display that allows immediate and complete reading of the information on the operating status of the machine, both for the user and for the installer or maintenance technician. Through six intuitively functional keys it is possible to easily adjust both the temperature in heating and DHW, and access the configuration of the machine parameters, rather than resetting the alarm states.

UNIVERSAL INSTALLATION

Ciao AT is designed to also be installed outdoors in partially protected places or contained recesses (e.g. Edilbox Beretta), thanks to the board's anti-freeze protection down to 0°C. In colder temperatures it is possible to extend the protection down to -10°C using the special antifreeze heater kit.

Product Guarantee
All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Condensing Boiler Beretta Ciao At 25 C Low Nox 20176935 Methane Complete With Smoke Kit

Product form

Beretta CIAO AT 25 C LOW NOx condensing boiler Complete with Fume Kit 20176935 - NEW Technical specifications according to... Read more

€674,00 Incl. VAT

    Description

    Beretta CIAO AT 25 C LOW NOx condensing boiler Complete with Fume Kit 20176935 - NEW


    Technical specifications according to ErP directives

    • Class B heating energy efficiency
    • Sanitary energy efficiency Class A
    • Sanitary load profile - XL

    Technical features:

    • Nominal heat input kW 25.00
    • NOx Class 6.00
    • Total electrical power Watt 102.00
    • IP electrical protection degree IPX5D
    • Expansion vessel capacity 8 litres
    • Maximum pressure bar 8
    • Quantity of hot water with Δt=25°C litres/min 14.3

    Dimensions

    • Boiler size (HxLxP) mm 715x405x250

    CIAO AT with stainless steel heat exchanger

    BERETTA PRESENTS THE NEW CIAO AT, THE SPECIFIC CONDENSING BOILER FOR REPLACING TRADITIONAL HIGH TEMPERATURE SYSTEMS

    The new CIAO AT range is proposed in two combined models of 25 kW of power, with methane and LPG respectively. Both models are equipped with DIN standard hydraulic connections, to allow easy replacement of boilers with hydraulic standards other than Beretta. Many new features compared to the previous range. First of all, the new post-exchanger in stainless steel and composite material, which allows it to pre-heat the return water from the primary circuit using the residual heat of the exhaust fumes. The cooled burner, the new electronics and interface, the reduced depth of the boiler which allows installation even in contained recesses, complete the innovative profile of this product, which is preparing to become the reference in the specific segment of the replacement of radiator systems . The simple and linear design, in line with the Beretta style, the compactness of the dimensions and the installation flexibility make CIAO AT easy to integrate into any living environment, both inside homes and outdoors (in partially protected places) or recessed, also through dedicated accessories.

    The Technical Characteristics

    • New layout with compact dimensions and low weight (only 31 kg!) to facilitate transport and built-in installation
    • Traditional copper primary exchanger
    • New and robust finned pack post-exchanger in stainless steel with taste and composite material
    • Sanitary plate heat exchanger with possibility of pre-heating
    • Innovative gas-air combustion supervision system
    • Forced draft sealed chamber boiler with cooled low NOx burner
    • Standard automatic by-pass
    • Modulation range 1:3
    • Low consumption circulator (EEI ≤ 0.20), 6 m, with anti-blocking
    • Standard analogue hydrometer
    • Low NOx emissions : CLASS 6 (EN 15502-1)
    • Innovative gas valve regulation procedure
    • Sequence of DIN type hydraulic connections, ideal for replacing products with the same type of connections
    • Maximum installation flexibility: Indoor, outdoor and recessed installation (in a partially protected place)
    • Antifreeze heater kit, hydraulic connections and external probe available as accessories
    • New flue flange with click fit connection: Fast and safe, without the need for an external collar
    • IPX5D electrical protection degree
    • Boiler support template supplied
    • Compatible with BeSmart command
    • Thermostat
    • Dedicated LPG code: for conversion, contact authorized Beretta assistance centres
    LOW NOX BURNER

    CIAO AT is able to satisfy the most demanding requirements in terms of low emissions, in order to make heating appliances less polluting. Thanks to the innovative burner of CIAO AT, of the hyperstoichiometric type, a very low flame temperature is obtained as an effect. This characteristic, combined with the cooling of the burner through the heating circuit water, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by the legislation with flying colors ( EU Regulation 814/2013).

    NEW INTERFACE

    The new CIAO AT digital interface, designed with particular attention to ease of use, is equipped with a modern backlit display that allows immediate and complete reading of the information on the operating status of the machine, both for the user and for the installer or maintenance technician. Through six intuitively functional keys it is possible to easily adjust both the temperature in heating and DHW, and access the configuration of the machine parameters, rather than resetting the alarm states.

    UNIVERSAL INSTALLATION

    Ciao AT is designed to also be installed outdoors in partially protected places or contained recesses (e.g. Edilbox Beretta), thanks to the board's anti-freeze protection down to 0°C. In colder temperatures it is possible to extend the protection down to -10°C using the special antifreeze heater kit.

    Product Guarantee
    All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 40.0 kg
    • classe energetica produzione acs: A
    • classe energetica riscaldamento: B
    • gas: Methane
    • marca: BERETTA
    • metri quadri : 150
    • modello: 20176935
    • potenza in kw: 25
    • potenza nominale: 25
    • superficie riscaldabile mq: 150
    Shipping detailsShipping details

    The order is processed according to the payment method chosen:

    for payments by CREDIT CARD, PAYPAL, MARK, the order is processed the same day. Orders placed before 2.00 pm will be managed on the same day. The BRT or GLS courier will collect the ordered goods from our warehouses the following morning.

    Subsequently, the courier assigns the shipment number (tracking number) and communicates the same to the customer via e-mail, allowing him to follow the delivery status and estimated times in real time on the brt.it or gls-grop.com website. 24-72 the courier will deliver the goods (excluding islands and disadvantaged areas) to the address indicated by the Customer at the time of order confirmation. Transport costs are charged to the customer and are calculated taking into account the volume and/or weight of the ordered item/s. However, product delivery times vary according to the requested item, payment methods and the delivery times chosen by the Customer, which is why the times indicated are merely indicative and cannot be considered binding for Decidiprezzo srl. Orders placed online are delivered throughout Italy, with the exception of Livigno, Campione d'Italia, Vatican City and the Republic of San Marino. In some periods of the year (summer period / Christmas period) the processing times could undergo changes compared to the standard ones declared above.

    NB: In the periods of July and August due to the high amount of orders, delivery times could be delayed

    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Recensioni di CaldaieMurali.it

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account