Technical features Model : TurboMAG Plus Code : 0010016030 Power supply: methane Performance ErP energy class: Class A Nominal heat output: 31 kW DHW direct withdrawal range ΔT = 25°C : 2.5 - 16 l/min Forced draft sealed chamber Ignition: electronic Dimensions Compact dimensions (HxWxD): 600x410x185 mm Vaillant TurboMAG Plus water heater Quietness, Flexibility and Absolute Quality Vaillant turboMAG gas water heaters are the result of careful studies and careful planning. Each water heater is constantly monitored right from the assembly stage to ensure maximum reliability, great performance and always guarantee maximum comfort and significant energy savings. TurboMAG Plus Forced draught instantaneous water heaters, with electronic ignition with wide modulation range and extremely compact dimensions: among the smallest on the market Extremely compact dimensions Wide modulation range Perfect dispensing temperature stability Design and intuitive touch screen Energy efficiency class up to A depending on the model. Domestic hot water The turboMAG plus water heaters guarantee plenty of hot water immediately, always at a constant temperature and maximum operational safety. Precisely safety is the added value of this range of water heaters. The Vaillant research and development team, which has been focused on ensuring leadership in the sector for over 140 years, has developed turboMAG plus with the target of safety: in fact, 26 control to ensure maximum user reliability. The new turboMAG plus are water heaters equipped with a three-stage combustion system which broaden the modulation range ensuring perfect temperature stability during hot water delivery. A new exchanger raises the performance of the water heater which, in the 11 – 14 – 16 liters per minute versions, offers a flexible choice for every user. turboMAG plus allows 360° installation flexibility: inside apartments and also outside, resisting temperatures down to -15°C (thanks to the antifreeze accessory) and rain (IPX5D approval). A solar kit as an accessory also allows you to pre-heat the incoming water, further reducing gas consumption. turboMAG plus (hot water production) is the new version of forced draught water heaters with DHW flow rates of: 11, 14 and 16 litres/minute running on Natural Gas and LPG . Quality Continuous development since 1874: Vaillant has been accredited for its superior quality Careful selection of components that meet the highest requirements and guarantee perfect functionality Modern Design: The well-designed casing with high-quality appearance that fits perfectly into your home Total safety: 26 safety functions guarantee the functioning of the appliance Water heater interface with touch screen (IMD): Display with maximum water protection IPX5D protection: Tested with water jets up to a maximum of 12.5 l/min from all directions Flexible and efficient Exchanger with high efficiency: Water heating with minimum gas consumption and lower bill consumption Burner with high modulation: Precise regulation of the thermal power in relation to the DHW request Reduced noise thanks to fan modulation: between 2,400 and 4,800 rpm Various DHW production profiles (bath or shower): Bath filling mode: monitoring of the filling volume Normal temperature setting 38-60°C Simplified replacement: Same flue position and wall bracket, Reduced installation times High comfort 11, 14 & 16 liters of DHW production High modulation 1:4 Maximum temperature stability in DHW supply: Avoid unwanted temperature variations 3-level combustion: High modulation range 25-100% Ecodesign Directive (ErP) 2015 How to be ready for new EU legislation What will happen from 26 September 2015? From this date it will no longer be possible to produce traditional forced draft boilers. Instead, it will be possible to continue producing condensing boilers and traditional open chamber boilers equipped with high-efficiency pumps and compliant with the new ErP requirements such as emission, noise and efficiency levels. In particular, the installation of traditional open chamber boilers will only be possible to replace old boilers installed in multi-family buildings which discharge the fumes into branched collective flues (CCR). Products placed on the market before 09/26/2015 that do not comply with the requirements of the new directive, such as traditional forced draft boilers and boilers not equipped with a high efficiency pump, can still be purchased, sold and installed. ErP and ELD: what do they mean and how are they different? ErP : The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive is aimed at two categories of products relevant to installers and resellers in the sector: - Category 1 includes space heating appliances; in particular: electrical, gas and diesel appliances such as boilers, heat pumps and cogenerators. - Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel such as water heaters, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres.  ELD: in addition to the ErP directive, the EU has also introduced mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and the production of domestic hot water are labeled with an indication of their energy efficiency class. By combining the products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label. When and how will the new rules apply? On 26 September 2015 the new rules will come into effect. Until then, neither manufacturers, retailers or installers have to comply with the new Ecodesign or labeling provisions. Once the new rules come into effect, manufacturers will only be able to manufacture products that comply with the new Ecodesign requirements, and will be required to supply an energy label with the products What do the new rules mean for the end customer? Unlike household appliances, energy labels on heating and domestic hot water products and systems can only offer a first orientation and will not necessarily provide the best solution for a certain type of installation, nor will they give indications on the assumed cost of energy when obtains a high energy classification. For example, it is not said that a heat pump which presumably will have a higher efficiency class than a condensing boiler can then actually be used in a given type of building. This is why the advice of a competent technician is still necessary to understand the label and select the best product or system that best meets the needs of your building. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: SINCE THIS PRODUCT IS DISCONTINUED, THE NEW AVENIR PLUS LNX MODEL WILL BE SHIPPED WHEN STOCKS END GAS WATER HEATER CHAFFOTEAUX AVENIR PLUS SFT 16 EU METHANE - COMPLETE WITH FUME EXHAUST KIT: AVENIR PLUS the gas water heater with 2 - Thermostatic Sealed Chamber Water Heaters guarantees total safety and maximum comfort for the user. Technical specifications Product code: 3632174 Energy label specifications according to the European ErP directive Sanitary energy efficiency Class A Withdrawal profile: XL Description: Model: AVENIR PLUS SFT 16 EU Ignition: electronic flame ionization Type: gas instantaneous water heater with 2 - Sealed chamber water heaters Operating characteristics: Nominal heat input : 31 kW Nominal heat output: 28 kW Supply pressure: 28-30/37 mbar Consumption - Flow rates/hour: 2.4 m3/h Hydraulic characteristics: Minimum/maximum nominal pressure: 0.1/8.5 bar Minimum operating flow: 2 l/min Flow rate with salttermic(t 25C): 16 l/min electrical circuit: Maximum absorbed power: 49 kW Electrical protection type: IPX4D Power supply: METHANE Main features Avenir Plus AVENIR PLUS the gas water heater with 2 thermostatic sealed chamber water heaters guarantees total safety and maximum comfort for the user. The innovative design and compact size simplify use, installation and maintenance. Sanitary comfort Thermostatic: High precision NTC probes to measure the temperature at the cold water inlet and at the hot water outlet. The temperature remains stable even in the presence of variations in the water flow rate. The solar kit with thermostatic valve allows you to connect Avenir Plus to solar systems An ecological solution to save energy. Temperature control via probe. Convenience of installation use Different powers to increase the hot water flow rate (11 and 16 l/min with !t 25, C). Pressure switch for fume control. Versatile: Works perfectly with low hydraulic pressures (0.1 bar). Compatible with solar systems for greater gas savings. 2 - Sealed chamber water heaters of maximum safety for unventilated spaces. Available in 11 and 16 liter versions, natural gas and butane gas. sanitary pressure switch. energy saving and environmentally friendly Final 25% gas consumption reduction thanks to electronic ignition and flame ionization. Additional savings in gas consumption by combining the water heater with our solar systems. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the eco-design directive (ErP notcome ,© Energy Related Products ,î) imposes a minimum energy efficiency for heating devices for the production of hot water in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows for comparisons on the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and kettles placed on the market from 26 September 2015. It's about me too YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label; technical product sheet; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold together with other additional devices; technical sheet of the system with the parts relating to the products and the system already compiled. Dealer Responsibility First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible; all appliances and/systems are always accompanied by the obligatory technical data sheets; any type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production must be equipped with the new energy label which will report the energy class and main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of appliance there are different labels. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also provided in cases where a series of combined appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

THIS ITEM WILL BE REPLACED WITH THE NEW MODEL NEXT EVO X 16 LT. COD. PRODUCT 3632433 Technical features Product code: 3632165 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: XL profile Characteristics of heating/DHW operation: Category II 2H3P Nominal thermal power kW 28 Minimum thermal power kW 5.4 Modulation range 6 - 31.0 Nominal heat input kW 31 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 16.0 Flow rate with temperature difference (Δt) 25 °C l/min 8.5 Supply voltage (Freq. 50 HZ) V 230 Maximum absorbed power W 49 Protection type IPX4D Power supply: LPG General characteristics Next Evo EU The sealed chamber instantaneous water heater Ariston launches Next Evo , the new instantaneous gas water heater for the production of domestic hot water. Characterized by an exclusive design, reduced dimensions and new functions, Next Evo is even more efficient and easy to use. The innovative electronic control of Next Evo allows you to adjust, via an intuitive LCD display, the ideal temperature for the user and to keep it constant even when the required water flow varies, thanks to the two NTC probes which measure the temperature of the both incoming and outgoing water. The central position of the smoke outlet and the extremely reduced depth (only 17.5 cm) make it extremely flexible and easy to install. Maximum energy saving is ensured by the possible integration of Next Evo with natural and forced circulation thermal solar systems: the solar kit with thermostatic valve has been designed precisely to facilitate its implementation. A new, innovative way of conceiving solar integration: versatile, practical and easy to install Characteristics: Ultra compact: only 17.5 cm deep Thermostatic: modulating temperature control via NTC probes allowing high standards in terms of energy saving and comfort Flame ionisation electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.1 bar Operation even with minimum water flow rates > 2 l/min Can be integrated with solar thermal systems Presence of the smoke pressure switch Presence of the water flow switch IPX4D electrical protection Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Sanitary efficiency class: A; Sanitary load profile: XL; Performance: Domestic hot water production (ΔT = 25K): 16.0 l/min; Domestic hot water production (ΔT = 35K): 11.4 l/min; Minimum hot water flow rate: 2.5 l/min; Thermal power (min/max): 7.7 - 31.0 kW; Power supply: 230/50V/Hz; Total electric power: 123W; Electric power without antifreeze device: 51 W; Inlet gas pressure: 20/37 mbar; Methane fumes discharge temperature (min.max): 100/200 °C; Maximum operating overpressure: 10 bar; Admissible operating pressure range (min./max): 0.2/10 bar; DHW temperature (min.max): 38-60 °C; Sanitary fittings: G 1/2" inch; Gas connection: G 1/2" inch; Fume exhaust connection: 60/100 mm; Sound Power: 68 dBA; Minimum operating temperature: -25°C; IP degree of protection IP X5D; Power supply: LPG or Propane gas (G31); Dimensions (HxWxL): 609x180x453 mm; Weight: 21.0 Kg; General characteristics Vaillant OutSide Mag water heater designed to always guarantee the same temperature of the water being dispensed. A particular feature of this water heater is its easy installation for outdoors, not even requiring connections to the flue, thanks to a facade drain already integrated in the front panel, it also guarantees very high resistance to atmospheric agents and the coldest temperatures (up to -25°C). Studied in detail, also through a modern and innovative design built with high efficiency materials, which not only fit into any environment, but through the front air intake always ensures the correct oxygen supply to ensure that the device work properly. All managed by a high technology that through a display or Touch interface, simple and intuitive to use, allows the rapid management of your comfort, and has a special function that through a loud acoustic signal, warns you in case there is an overflow from the tub during ACS output. Advantages: New version with improved performance; Extremely compact dimensions; Wide modulation range; Perfect dispensing temperature stability; Design and intuitive touch screen;

Read more less

GAS WATER HEATER ARISTON NEXT OUTDOOR 16 EU LPG - new ErP model Product code: 3632258 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: XL profile Characteristics of heating/DHW operation: CE certification (pin) 0051CM4090 Category II 2H3P Nominal thermal power kW 28.0 Minimum thermal power kW 5.0 Modulation range 1 : 5.6 Nominal heat input kW 31.0 Min/max temperature selectable 35-70 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 16.0 Supply voltage (frequency 50 HZ) V 230-50 Maximum absorbed power W 48 Minimum ambient temperature of use °C -20 Electrical protection type IPX5D Dimensions (HxWxD): 563 x 350 x 130 mm Weight: 12.8kg Power supply: LPG Next Outdoor EU The generation of gas water heaters for outdoor use Next Outdoor, the new instantaneous gas water heater for outdoor use. Featuring an exclusive design, small size (only 13cm deep!) and new features. Next outdoor offers maximum temperature stability thanks to the electronic modulation of the gas and the fan, the wide modulation ratio between the maximum and minimum power, and the automatic water flow regulator. With the bathroom function, Next outdoor allows you to have the ideal quantity and temperature for maximum relaxation. Thanks to the introduction of the PROFESSIONAL 20 and 24 l/min models, the Ariston range for the outdoor version is completed, without however renouncing an attractive design and the compactness that distinguishes it on the market. The Next Outdoor, thanks to the remote control, has all the functions at hand and the small size makes it easily adaptable to any type of outdoor environment. Furthermore, thanks to the models of the new PROFESSIONAL range (20 and 24 l/min) it is able to manage up to a maximum of 5 products in cascade. Next Outdoor is the most efficient in its category and can also be integrated with solar systems. Thanks to the kit with thermostatic valve, the NEXT OUTDOOR is set up for integration and management of solar systems. An ecological and clean solution to avoid waste and encourage energy saving. Characteristics: External installation type A3 It does not require a fume exhaust system Standard remote control: with the remote control it is possible to change the temperature from anywhere in the house Electronic ignition (220 v) with ionization flame sensor and consequent gas savings of up to 25% Maximum efficiency > 90% Modulation ratio 1:6 Automatic flow regulator with stepping motor Electronic thermostatic modulation for precise temperature control Minimum activation pressure at 0.1 bar Standard antifreeze function: up to -20° Cascade solution up to 5 products (only with models 20 and 24) Integration with solar thermal via thermostatic valve Small size Absolute safety thanks to the IPX5D electrical protection Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

VAILLANT GAS WATER HEATER for outdoor outsideMAG IT 16-5/0-5 METHANE Technical features ErP energy class: Class A Sanitary load profile: XL Reduced heat output - nominal kW 7.7 - 31.0 Permissible operating pressure range 0.2 - 10 bar Domestic hot water regulation temperature °C 38-60 Minimum hot water flow l/min 2.5 Domestic hot water production (ΔT = 25K) l/min 16.0 Domestic hot water production (ΔT = 35K) l/min 11.4 Power supply V/Hz 230/50 Total electric power W 123 Electric power without antifreeze device W 51 Dimensions HxDxL mm 609-180-413; 21 Kgs Sound power dBA 68 IP degree of protection IP X5D OutsideMAG The outdoor water heater that you control from the inside: simple to install and no encumbrance inside the house. The outsideMAG range of water heaters was designed and built to be installed outside the home and, thanks to the standard antifreeze protection, to withstand temperatures down to -25°C. The new version of outsideMAG water heaters has undergone significant improvements in domestic hot water production performance. The new forced draft outdoor versions with DHW flow rates of: 11, 14 and 16 litres/minute with Natural Gas and LPG, guarantee perfect temperature stability in dispensing. Vaillant has designed this new range to operate outside the home by increasing protection up to -25°C, as standard. They are very simple to install and do not require connections to the flue since they have a front outlet already integrated in the front panel (Type A approval). The new outsideMAG water heater stands out for its modern design that can be inserted in any external environment. The exclusive front air intake always ensures the right supply of oxygen for the correct functioning of the appliance, also giving it an unmistakable aesthetic touch. The materials used are particularly thick and designed to last over time even in contact with the elements. Touch interface for very simple comfort management. A special function allows to reduce the risk of overflowing from the tank during the DHW outlet through a loud acoustic signal. outsideMAGs are very simple to install. If there is no flue it is possible to install them anyway since they have a facade exhaust already integrated in the front panel (type A approval). For installation checks, always contact a qualified installer. They can be positioned on the balcony in a suitable position that complies with the regulations in force and the minimum distances to also facilitate the performance of any maintenance operation on the appliance. The new outsideMAGs are also characterized by a modern and sober design conceived to fit harmoniously into any type of external environment, from the balcony, to the terrace, to the veranda, to the garden. The outdoor water heater The Vaillant outsideMAG range of outdoor water heaters is available with volumes of 11, 14 and 16 liters per minute (in natural gas and LPG versions) to meet any domestic hot water need in a residential setting. All operations on the water heater are managed from inside the home. Thanks to the multitouch control panel, supplied as standard with the outsideMAG, you just need to touch the display functions with a touch of your finger to increase the water temperature whenever you want. But not only. You can also set the amount of water needed to fill the bathtub, thus preventing it from overflowing (bathTUBE function). Through the display it will always be possible to keep the water temperature and, in general, the functioning of the water heater under control. The compact dimensions of these outdoor water heaters allow installation even in the smallest niches. Never before so much comfort in so little space. High hot water production (up to 16 l/min) Equipped with acoustic signaling system to prevent water from escaping from the bathtub Reliability of every single component tested by Vaillant LabTest Frost protection down to -25°C Equipped with multitouch display to control the appliance from inside the home Where possible, it does not require a fume exhaust Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE WATER HEATER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE Ferroli gas water heater for outdoor use EXTERNO 16 NG liters low NOx LPG Energy class A XL load profile Nominal heat input Max / Min kW 32 / 9.5 Thermal power Max / Min kW 29.6 / 8.8 NOx class (according to EN 15502) 6 Maximum working pressure Max / Min bar 10 / 0.2 Sanitary production Δt 25°C Δt 30°C l/min 16 / 14.1 Power supply V/Hz 230 / 50 Electrical protection degree IP X5 Dimensions HxWxD mm 544x384x176 external Wall-mounted Low NOx gas water heater for outdoor installations without smoke ducts EXTERNO is an A3 type instantaneous gas water heater with front flue outlet and suitable for outdoor installation without flue gas evacuation ducts. The water heater is equipped with a combustion unit which, in combination with a LOW NOx type micro-flame burner, guarantees pollutant levels below the parameters imposed by the severe limitations of the European ErP directive. EXTERNO has been designed exclusively for outdoor installations such as on balconies, attics or dedicated shafts. The casing is made up of two molded and IPX5D insulated shells and the water circuit inside the appliance is protected with electrical resistances, fitted as standard, and managed by the electronic card. These measures allow EXTERNO to function correctly up to extreme conditions of -20°C. All appliances are supplied as standard with remote timer control (and 10-metre long connection cable) equipped with a large interface display and simple control keys, to make adjustment easy and intuitive. SOLAR FUNCTION All models in the EXTERNO range can be easily installed in combination with a solar thermal system for the production of domestic hot water. The hydraulic circuit with its components have been designed to be able to operate even at the high temperatures of the water leaving the panels. ECO FUNCTION Through the remote control, it is possible to activate the ECO function. When operating in ECO mode, the EXTERNO water heater will automatically set the hot water outlet temperature to 42°C and at a reduced power of approximately 75% of the nominal power CHILD PROTECTION If the hot water temperature is set to a very high value, each time the water heater is switched OFF, the delivery temperature will automatically return to 48°C so that the next withdrawal takes place in complete safety. The EXTERNO series of water heaters does not have controls on the machine. The DHW temperature control, setting and regulation functions are delegated to a remote control supplied as standard, complete with connection cable. The interface display and the control keys have been designed to make using the control as simple and intuitive as possible. In the event of an anomaly and/or malfunction of the water heater, the indication on the display is accompanied by an audible signal. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THIS ITEM WILL BE REPLACED WITH NEXT EVO X 16 LT. COD. 3632433 Technical features Product code: 3632165 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: XL profile Characteristics of heating/DHW operation: Category II 2H3P Nominal thermal power kW 28 Minimum thermal power kW 5.4 Modulation range 6 - 31.0 Nominal heat input kW 31 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 16.0 Flow rate with temperature difference (Δt) 25 °C l/min 8.5 Supply voltage (Freq. 50 HZ) V 230 Maximum absorbed power W 49 Protection type IPX4D Power supply: METHANE General characteristics Next Evo EU The sealed chamber instantaneous water heater Ariston launches Next Evo , the new instantaneous gas water heater for the production of domestic hot water. Characterized by an exclusive design, reduced dimensions and new functions, Next Evo is even more efficient and easy to use. The innovative electronic control of Next Evo allows you to adjust, via an intuitive LCD display, the ideal temperature for the user and to keep it constant even when the required water flow varies, thanks to the two NTC probes which measure the temperature of the both incoming and outgoing water. The central position of the smoke outlet and the extremely reduced depth (only 17.5 cm) make it extremely flexible and easy to install. Maximum energy saving is ensured by the possible integration of Next Evo with natural and forced circulation thermal solar systems: the solar kit with thermostatic valve has been designed precisely to facilitate its implementation. A new, innovative way of conceiving solar integration: versatile, practical and easy to install Characteristics: Ultra compact: only 17.5 cm deep Thermostatic: modulating temperature control via NTC probes allowing high standards in terms of energy saving and comfort Flame ionisation electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.1 bar Operation even with minimum water flow rates > 2 l/min Can be integrated with solar thermal systems Presence of the smoke pressure switch Presence of the water flow switch IPX4D electrical protection Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER CHAFFOTEAUX AVENIR PLUS SFT 16 EU LPG - COMPLETE WITH FUME EXHAUST KIT: AVENIR PLUS the gas water heater with 2 - Thermostatic Sealed Chamber Water Heaters guarantees total safety and maximum comfort for the user Technical specifications Product code: 3632173 Energy label specifications according to the European ErP directive Sanitary energy efficiency Class A Withdrawal profile: XL Description: Model: AVENIR PLUS SFT 16 EU Ignition: electronic flame ionization Type: gas instantaneous water heater with 2 - Sealed chamber water heaters Operating characteristics: Nominal heat input : 31 kW Nominal heat output: 28 kW LPG gas supply pressure: 28-30/37 mbar Consumption - LPG Gas Flow Rates/Hour: 2.4 m3/h Hydraulic characteristics: Minimum/maximum nominal pressure: 0.1/8.5 bar Minimum operating flow: 2 l/min Flow rate with salttermic(t 25C): 16 l/min electrical circuit: Maximum absorbed power: 49 kW Electrical protection type: IPX4D Power supply: LPG Main features Avenir Plus AVENIR PLUS the gas water heater with 2 thermostatic sealed chamber water heaters guarantees total safety and maximum comfort for the user. The innovative design and compact size simplify use, installation and maintenance. Sanitary comfort Thermostatic: High precision NTC probes to measure the temperature at the cold water inlet and at the hot water outlet. The temperature remains stable even in the presence of variations in the water flow rate. The solar kit with thermostatic valve allows you to connect Avenir Plus to solar systems An ecological solution to save energy. Temperature control via probe. Convenience of installation use Different powers to increase the hot water flow rate (11 and 16 l/min with !t 25, C). Pressure switch for fume control. Versatile: Works perfectly with low hydraulic pressures (0.1 bar). Compatible with solar systems for greater gas savings. 2 - Sealed chamber water heaters of maximum safety for unventilated spaces. Available in 11 and 16 liter versions, natural gas and butane gas. sanitary pressure switch. energy saving and environmentally friendly Final 25% gas consumption reduction thanks to electronic ignition and flame ionization. Additional savings in gas consumption by combining the water heater with our solar systems. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the eco-design directive (ErP notcome ,© Energy Related Products ,î) imposes a minimum energy efficiency for heating devices for the production of hot water in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows for comparisons on the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and kettles placed on the market from 26 September 2015. It's about me too YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label; technical product sheet; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold together with other additional devices; technical sheet of the system with the parts relating to the products and the system already compiled. Dealer Responsibility First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible; all appliances and/systems are always accompanied by the obligatory technical data sheets; any type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production must be equipped with the new energy label which will report the energy class and main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of appliance there are different labels. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also provided in cases where a series of combined appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

VAILLANT GAS WATER HEATER for outdoor outsideMAG IT 16-5/0-5 LPG Technical features ErP energy class: Class A Sanitary load profile: XL Reduced heat output - nominal kW 7.7 - 31.0 Permissible operating pressure range 0.2 - 10 bar Domestic hot water regulation temperature °C 38-60 Minimum hot water flow l/min 2.5 Domestic hot water production (ΔT = 25K) l/min 16.0 Domestic hot water production (ΔT = 35K) l/min 11.4 Power supply V/Hz 230/50 Total electric power W 123 Electric power without antifreeze device W 51 Dimensions HxDxL mm 609-180-413; 21 Kgs Sound power dBA 68 IP degree of protection IP X5D OutsideMAG The outdoor water heater that you control from the inside: simple to install and no encumbrance inside the house. The outsideMAG range of water heaters was designed and built to be installed outside the home and, thanks to the standard antifreeze protection, to withstand temperatures down to -25°C. The new version of outsideMAG water heaters has undergone significant improvements in domestic hot water production performance. The new forced draft outdoor versions with DHW flow rates of: 11, 14 and 16 litres/minute with Natural Gas and LPG, guarantee perfect temperature stability in dispensing. Vaillant has designed this new range to operate outside the home by increasing protection up to -25°C, as standard. They are very simple to install and do not require connections to the flue since they have a front outlet already integrated in the front panel (Type A approval). The new outsideMAG water heater stands out for its modern design that can be inserted in any external environment. The exclusive front air intake always ensures the right supply of oxygen for the correct functioning of the appliance, also giving it an unmistakable aesthetic touch. The materials used are particularly thick and designed to last over time even in contact with the elements. Touch interface for very simple comfort management. A special function allows to reduce the risk of overflowing from the tank during the DHW outlet through a loud acoustic signal. outsideMAGs are very simple to install. If there is no flue it is possible to install them anyway since they have a facade exhaust already integrated in the front panel (type A approval). For installation checks, always contact a qualified installer. They can be positioned on the balcony in a suitable position that complies with the regulations in force and the minimum distances to also facilitate the performance of any maintenance operation on the appliance. The new outsideMAGs are also characterized by a modern and sober design conceived to fit harmoniously into any type of external environment, from the balcony, to the terrace, to the veranda, to the garden. The outdoor water heater The Vaillant outsideMAG range of outdoor water heaters is available with volumes of 11, 14 and 16 liters per minute (in natural gas and LPG versions) to meet any domestic hot water need in a residential setting. All operations on the water heater are managed from inside the home. Thanks to the multitouch control panel, supplied as standard with the outsideMAG, you just need to touch the display functions with a touch of your finger to increase the water temperature whenever you want. But not only. You can also set the amount of water needed to fill the bathtub, thus preventing it from overflowing (bathTUBE function). Through the display it will always be possible to keep the water temperature and, in general, the functioning of the water heater under control. The compact dimensions of these outdoor water heaters allow installation even in the smallest niches. Never before so much comfort in so little space. High hot water production (up to 16 l/min) Equipped with acoustic signaling system to prevent water from escaping from the bathtub Reliability of every single component tested by Vaillant LabTest Frost protection down to -25°C Equipped with multitouch display to control the appliance from inside the home Where possible, it does not require a fume exhaust Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS WATER HEATER ARISTON NEXT OUTDOOR 16 EU METHANE - new ErP model Product code: 3632258 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: XL profile Characteristics of heating/DHW operation: CE certification (pin) 0051CM4090 Category II 2H3P Nominal thermal power kW 28.0 Minimum thermal power kW 5.0 Modulation range 1 : 5.6 Nominal heat input kW 31.0 Min/max temperature selectable 35-70 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 16.0 Supply voltage (frequency 50 HZ) V 230-50 Maximum absorbed power W 48 Minimum ambient temperature of use °C -20 Electrical protection type IPX5D Dimensions (HxWxD): 563 x 350 x 130 mm Weight: 12.8kg Power supply: METHANE Next Outdoor EU The generation of gas water heaters for outdoor use Next Outdoor, the new instantaneous gas water heater for outdoor use. Featuring an exclusive design, small size (only 13cm deep!) and new features. Next outdoor offers maximum temperature stability thanks to the electronic modulation of the gas and the fan, the wide modulation ratio between the maximum and minimum power, and the automatic water flow regulator. With the bathroom function, Next outdoor allows you to have the ideal quantity and temperature for maximum relaxation. Thanks to the introduction of the PROFESSIONAL 20 and 24 l/min models, the Ariston range for the outdoor version is completed, without however renouncing an attractive design and the compactness that distinguishes it on the market. The Next Outdoor, thanks to the remote control, has all the functions at hand and the small size makes it easily adaptable to any type of outdoor environment. Furthermore, thanks to the models of the new PROFESSIONAL range (20 and 24 l/min) it is able to manage up to a maximum of 5 products in cascade. Next Outdoor is the most efficient in its category and can also be integrated with solar systems. Thanks to the kit with thermostatic valve, the NEXT OUTDOOR is set up for integration and management of solar systems. An ecological and clean solution to avoid waste and encourage energy saving. Characteristics: External installation type A3 It does not require a fume exhaust system Standard remote control: with the remote control it is possible to change the temperature from anywhere in the house Electronic ignition (220 v) with ionization flame sensor and consequent gas savings of up to 25% Maximum efficiency > 90% Modulation ratio 1:6 Automatic flow regulator with stepping motor Electronic thermostatic modulation for precise temperature control Minimum activation pressure at 0.1 bar Standard antifreeze function: up to -20° Cascade solution up to 5 products (only with models 20 and 24) Integration with solar thermal via thermostatic valve Small size Absolute safety thanks to the IPX5D electrical protection Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less