OFFER - Immergas CAESAR EXTRA 11 CS Methane Gas Watertight Chamber Outdoor Water Heater cod. 3.028687 low NOx ErP Efficiency class Heating efficiency class A Sanitary efficiency class M Sanitary Rated power min/max kW 19.3 Hot water production (∆T 25 °C) l/min* 11 generals Approved for outdoor use in a partially protected place Electronic ignition Dimensions (HxWxD) mm 619 x 304 x 243 CAESAR EXTRA Instantaneous water heater with sealed chamber , low NOx, for outdoors Low NOx combustion system Approved for outdoor installation only in a partially protected place Standard antifreeze resistance up to -15 °C They do not require a flue Electronic ignition and modulation Equipped with LCD display and encoder knob Solar function for combination with solar thermal systems Excellent hydraulic sensitivity with minimum operating water pressure Fixing dowels and standard bracket Optional connection unit IPX5D electrical protection degree Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB Article out of production in case of unavailability of the product the new model NEXT EVO X 11 will be shipped Technical features Product code: 3632160 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: Category II 2H3P Nominal thermal power kW 19.5 Minimum thermal power kW 4.5 Modulation range 5 - 21.5 Nominal heat input kW 21.5 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 11.0 Flow rate with temperature difference (Δt) 25 °C l/min 8.5 Supply voltage (Freq. 50 HZ) V 230 Maximum absorbed power W 37 Protection type IPX4D Power supply: METHANE General characteristics Next Evo EU The sealed chamber instantaneous water heater Ariston launches Next Evo , the new instantaneous gas water heater for the production of domestic hot water. Characterized by an exclusive design, reduced dimensions and new functions, Next Evo is even more efficient and easy to use. The innovative electronic control of Next Evo allows you to adjust, via an intuitive LCD display, the ideal temperature for the user and to keep it constant even when the required water flow varies, thanks to the two NTC probes which measure the temperature of the both incoming and outgoing water. The central position of the smoke outlet and the extremely reduced depth (only 17.5 cm) make it extremely flexible and easy to install. Maximum energy saving is ensured by the possible integration of Next Evo with natural and forced circulation thermal solar systems: the solar kit with thermostatic valve has been designed precisely to facilitate its implementation. A new, innovative way of conceiving solar integration: versatile, practical and easy to install Characteristics: Ultra compact: only 17.5 cm deep Thermostatic: modulating temperature control via NTC probes allowing high standards in terms of energy saving and comfort Flame ionisation electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.1 bar Operation even with minimum water flow rates > 2 l/min Can be integrated with solar thermal systems Presence of the smoke pressure switch Presence of the water flow switch IPX4D electrical protection Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Energy label specifications according to the European ErP directive DHW sanitary energy efficiency: Class A Declared load profile: M Annual consumption of electricity (kWh/annum) and fuel (GJ/annum) 6 - 6 Characteristics of heating/DHW operation: Code: REU-VRM1120WD-LPG Forced flow open chamber Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulation max lt 500 Standard antifreeze down to -20°C Installation: Outdoor - Apartment Dimensions: mm 503x356x181 - 15 Kg Natural gas heat input Min/Max (kW) 2.75/22 Water flow Δt 25°C Min/Max (l/min) 11l/min Max operating temperature (°C) 75 Minimum activation pressure (bar) 0.1 Min/Max nominal operating pressure (bar) 1.2 / 10 Electricity consumption normal / stand-by / antifreeze (W) 29 / 2 / 74 IPX5D protection Class NOx5 LPG version RINNAI GAS WATER HEATER: INFINITY infinite savings and comfort Rinnai Infinity is the line of instantaneous GAS* water heaters, with high efficiency forced flow, for domestic and professional indoor and outdoor use, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Temperature selection per degree via the standard remote control Energy saving Simplicity of design and installation Compact size Superior performance and absolute security Free initial testing, carried out by an authorized Rinnai technical assistance centre Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled galvanized steel shell Frost, thanks to the standard antifreeze on all appliances (including indoors) The STANDARD remote control allows the user to select the desired water temperature with accuracy to the degree, directly from the point of use (when the tap is opened). Energy saving: Rinnai Infinity eliminates any useless waste and ensures real savings: Gas operation guarantees considerably lower costs than electric operation. Compared to a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent net cut in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers or other heat generators, modulating, only when needed and only as much as needed, to reach the set temperature Domestic Range: Superior performance in small denominations The wide domestic range, differentiated in various hydraulic flow rates, allows the user to choose the most suitable appliance for his needs. The compact dimensions and captivating aesthetics also guarantee a harmonious and discreet installation, both inside and outside the home General characteristics INFINITY 11e Infinity 11 outdoor is an instantaneous domestic hot water producer for outdoor installation with electronic temperature management and water flow control. Anti-corrosion enamelled galvanized steel casing and standard control panel with temperature management and self-diagnosis function. Max operating temperature equal to 75° C. Characteristics: Unlimited hot water without sudden changes in temperature Temperature control to the degree via the standard remote control External installation does not require fumes exhaust Flow regulator: constant temperature as the flow varies Electronic ignition without pilot flame Free initial testing, carried out by an authorized Rinnai technical assistance centre ErP Ready Rinnai's commitment is aimed at an eco-sustainable future. For this reason all our products are "ERP Ready" or already in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies the Directive 2009/ 125/EC aimed at reducing the energy consumption of products through eco-compatible design. The Directive establishes very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements of energy and environmental performance for instruments that use energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energies on final consumption of 20% Since 26 September 2015, appliances for winter air conditioning and domestic hot water production have been accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD or Labeling Directive ( 2010/30/CE ) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to make its contribution to a more eco-sustainable world Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS NEW AND 100% WORKING, BUT IT HAS DENT ON THE SIDE AND FRONT, A PLASTIC CRACK ON THE KNOBS AND THE EXTERNAL PART SLIGHTLY DEFORMED (SEE PHOTO NEXT TO THE MAIN IMAGE) Open Chamber Gas Water Heater Hermann Saunier Duval OPALIA C 14 Low NOx LPG Electronic Ignition - NEW Model Opalia C14 14/1 Lix P ErP technical data Efficiency class A XL load profile Dimensions WxHxD : 380 x 640 x 225 mm Performance Rated power min/max kW 11.6/24.2 Continuous Flow DeltaT=25K 14.0 DHW temperature min-max 35/60 Sound power 63dB NOx class 6 OPALIA C Low NOx The gas water heaters in the Opalia C range are compact, easy to use and reliable. The Opalia C model is available in the 11 or 14 liter open chamber versions, all equipped with electronic battery ignition with safety lockout in the event of flame failure. A new burner makes it possible to reduce NOx emissions to a minimum and reach Class 6, as required by the ErP directive. Modern design and compact size - water heaters can be easily installed. Maximum safety: the safety thermostat intervenes in the event of overheating of the domestic hot water; the ionisation flame control blocks the gas supply in the event of a burner flame failure; the smoke anti-reflux safety device blocks the water heater in the event of risk of smoke emission into the environment. Low NOx emissions (class 6) Compact size Prestigious design Simplicity of management Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

ATTENTION THE PRODUCT IS NEW AND 100% WORKING, BUT IT HAS DENT ON THE FRONT AND SIDE (SEE PHOTO NEXT TO THE MAIN IMAGE) Riello Mini 17 LN Low NOx sealed chamber water heater complete with methane fume exhaust kit Typology: Forced Draft Sealed Chamber; Model: Mini 17 LN; Sanitary energy efficiency class: A; Sanitary load profile: L; Power supply:METHANE (G20/21); Daily gas consumption: 15,175 kW/h; Sanitary Energy Efficiency: 80.2%; Annual gas consumption: 11 GJ; Emissions of nitrogen oxides (Nox): 33 mg/kWh; Hot water production Δt=30°: 13.3 litres/min; Nominal heat input: 30.0 kW; Nominal thermal power: 27.90 kW; Min/max withdrawal range: 2.5/13 litres/min; Min/max pressure: 0.2/10.0 bar; DHW temperature selection range: 36-65°C ; Supply voltage: 230/50V/Hz; Electrical protection degree: IPX4D; Dimensions: (H×W×D) 640×400×240 mm;Weight: 21 kg; Water/gas connections: 1/2” – 3/4″ Ø; RIELLO MINI From RIELLO technological research comes MINI LN, the new line of low-emission instantaneous water heaters with sealed chamber, completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with recent European regulations to reduce NOx emissions. The new aesthetic, elegant and linear, and the compact dimensions, allow the integration of this product in any living environment. This feature represents the ideal solution for responding to any domestic hot water production need. Prepared for installation inside the home, the new water heaters can also be installed outside, in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10° c. Latest generation burner with reduced NOx emissions The new RIELLO MINI LN line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or less than 56 mg /kWh. The innovative hyperstoichiometric type burner allows the flame to be fed by a greater air-gas mixture than that required for combustion, resulting in a very low flame temperature. This characteristic, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by the legislation with flying colors international. The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. The technology and the advantages of the range Innovative hyperstoichiometric and cooled burner with low emissions Wide flame modulation which allows excellent stability of the domestic hot water delivery temperature, even with minimum withdrawals Electronic ignition and ionization flame control Wide flame modulation (1 : 3) which allows perfect stability of the domestic hot water delivery temperature, even with minimum withdrawals Brand new user interface with backlit display with icons and 4 keys, to easily navigate the menu and make adjustments Abundant domestic hot water production: 11, 13 or 17 litres/min Even more compact dimensions and simple installation Mounting template and power cable supplied. Instantaneous sealed chamber water heater with methane and LPG versions Many new functions in a linear and modern design new RIELLO Mini LN are characterized by the new electronics which, combined with the modern and linear design, results in a new control panel, simple and intuitive, with many additional and innovative functions. Through a large backlit digital display (40x60 mm) and 4 command keys, the user can manage all the functions of the water heater and navigate easily in the menu. The icon language of the display makes both the general setting of the appliance and the setting of the special functions particularly intuitive, as well as immediately displaying the diagnostics of any anomalies. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THIS ITEM WILL BE REPLACED WITH THE NEW MODEL NEXT EVO X 16 LT. COD. PRODUCT 3632433 Technical features Product code: 3632165 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: XL profile Characteristics of heating/DHW operation: Category II 2H3P Nominal thermal power kW 28 Minimum thermal power kW 5.4 Modulation range 6 - 31.0 Nominal heat input kW 31 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 16.0 Flow rate with temperature difference (Δt) 25 °C l/min 8.5 Supply voltage (Freq. 50 HZ) V 230 Maximum absorbed power W 49 Protection type IPX4D Power supply: LPG General characteristics Next Evo EU The sealed chamber instantaneous water heater Ariston launches Next Evo , the new instantaneous gas water heater for the production of domestic hot water. Characterized by an exclusive design, reduced dimensions and new functions, Next Evo is even more efficient and easy to use. The innovative electronic control of Next Evo allows you to adjust, via an intuitive LCD display, the ideal temperature for the user and to keep it constant even when the required water flow varies, thanks to the two NTC probes which measure the temperature of the both incoming and outgoing water. The central position of the smoke outlet and the extremely reduced depth (only 17.5 cm) make it extremely flexible and easy to install. Maximum energy saving is ensured by the possible integration of Next Evo with natural and forced circulation thermal solar systems: the solar kit with thermostatic valve has been designed precisely to facilitate its implementation. A new, innovative way of conceiving solar integration: versatile, practical and easy to install Characteristics: Ultra compact: only 17.5 cm deep Thermostatic: modulating temperature control via NTC probes allowing high standards in terms of energy saving and comfort Flame ionisation electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.1 bar Operation even with minimum water flow rates > 2 l/min Can be integrated with solar thermal systems Presence of the smoke pressure switch Presence of the water flow switch IPX4D electrical protection Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Open Chamber Water Heater Ferroli ZEFIRO ECO C 11 Low NOx - NEW ERP Class (Class G - A) A Load profile M Nominal heat input Max kW 21.1 Max / Min heat output kW 7.1 / 18.8 Maximum working pressure bar 10 Domestic hot water production Δt 25°C / Δt 30°C l/min 11.0 9.1 Sanitary temperature regulation Min / Max °C 40 / 65 Dimension (H x W x D) cm: 55x32.8x18.1 New Ferroli ECO range EFFECTIVE The ECO range has been designed according to the stringent efficiency parameters of the European ErP Directive. In practice, they are able to produce a lot of hot water at a low cost, respecting the environment and with minimal polluting emissions. They can also be integrated into a solar thermal system with extreme simplicity for maximum efficiency and comfort. EASY ECO water heaters are extremely simple to install and are interchangeable with previous series. Although very compact in size, they have been designed and built in such a way as to have easy access to the internal components for easy maintenance. BEAUTIFUL AND SMART The designers of the ECO project have created a «friendly» aesthetic that can be easily integrated with the most diverse furnishing styles. The knob or button controls have been designed to be easy to use and immediately understood. All Ferroli gas water heaters are equipped with a user interface display. ZEFIRO ECO Wall mounted gas water heater with natural draft and open chamber, low nox type - Copper exchanger - Interface display - Power modulation - Methane - Solar systems - Battery powered STRENGTHS: Copper heat exchanger with finned tubes, externally finished with an aluminum anti-corrosion treatment Modulating heat input and fine adjustment of the outlet hot water temperature Easy and immediate reading display with indicators on the operation of the appliance and the charge of the power supply batteries. Adjustment of power and hot water temperature with comfortable ergonomic knobs Battery powered ADVANTAGES OF ZEFIRO ECO: Available for operation with Natural Gas, LPG and Propane Air (50% air - 50% G31 by means of a specific transformation to be requested from the authorized assistance center at the maximum total price of 30 euros + VAT) Wide range of regulation of hot water temperature and power modulation Compact dimensions and low weight Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

NB Article out of production in case of unavailability of the product the new model NEXT EVO X 11 will be shipped Technical features Product code: 3632160 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: Category II 2H3P Nominal thermal power kW 19.5 Minimum thermal power kW 4.5 Modulation range 5 - 21.5 Nominal heat input kW 21.5 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 11.0 Flow rate with temperature difference (Δt) 25 °C l/min 8.5 Supply voltage (Freq. 50 HZ) V 230 Maximum absorbed power W 37 Protection type IPX4D Power supply: LPG General characteristics Next Evo EU The sealed chamber instantaneous water heater Ariston launches Next Evo , the new instantaneous gas water heater for the production of domestic hot water. Characterized by an exclusive design, reduced dimensions and new functions, Next Evo is even more efficient and easy to use. The innovative electronic control of Next Evo allows you to adjust, via an intuitive LCD display, the ideal temperature for the user and to keep it constant even when the required water flow varies, thanks to the two NTC probes which measure the temperature of the both incoming and outgoing water. The central position of the smoke outlet and the extremely reduced depth (only 17.5 cm) make it extremely flexible and easy to install. Maximum energy saving is ensured by the possible integration of Next Evo with natural and forced circulation thermal solar systems: the solar kit with thermostatic valve has been designed precisely to facilitate its implementation. A new, innovative way of conceiving solar integration: versatile, practical and easy to install Characteristics: Ultra compact: only 17.5 cm deep Thermostatic: modulating temperature control via NTC probes allowing high standards in terms of energy saving and comfort Flame ionisation electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.1 bar Operation even with minimum water flow rates > 2 l/min Can be integrated with solar thermal systems Presence of the smoke pressure switch Presence of the water flow switch IPX4D electrical protection Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Open Chamber Water Heater Ferroli ZEFIRO ECO C 11 Low NOx LPG - NEW ERP Class (Class G - A) A Load profile M Nominal heat input Max kW 21.1 Max / Min heat output kW 7.1 / 18.8 Maximum working pressure bar 10 Domestic hot water production Δt 25°C / Δt 30°C l/min 11.0 9.1 Sanitary temperature regulation Min / Max °C 40 / 65 Dimension (H x W x D) cm: 55x32.8x18.1 NB: LPG OPERATION THROUGH A SPECIAL CONVERTING TO BE REQUESTED FROM THE AUTHORIZED SERVICE CENTRE. New Ferroli ECO range EFFECTIVE The ECO range has been designed according to the stringent efficiency parameters of the European ErP Directive. In practice, they are able to produce a lot of hot water at a low cost, respecting the environment and with minimal polluting emissions. They can also be integrated into a solar thermal system with extreme simplicity for maximum efficiency and comfort. EASY ECO water heaters are extremely simple to install and are interchangeable with previous series. Although very compact in size, they have been designed and built in such a way as to have easy access to the internal components for easy maintenance. BEAUTIFUL AND SMART The designers of the ECO project have created a «friendly» aesthetic that can be easily integrated with the most diverse furnishing styles. The knob or button controls have been designed to be easy to use and immediately understood. All Ferroli gas water heaters are equipped with a user interface display. ZEFIRO ECO Wall mounted gas water heater with natural draft and open chamber, low nox type - Copper exchanger - Interface display - Power modulation - LPG / Propane air - Solar systems - Battery powered STRENGTHS: Copper heat exchanger with finned tubes, externally finished with an aluminum anti-corrosion treatment Modulating heat input and fine adjustment of the outlet hot water temperature Easy and immediate reading display with indicators on the operation of the appliance and the charge of the power supply batteries. Adjustment of power and hot water temperature with comfortable ergonomic knobs Battery powered ADVANTAGES OF ZEFIRO ECO: Available for operation with Natural Gas, LPG and Propane Air (50% air - 50% G31 by means of a specific transformation to be requested from the authorized assistance center at the maximum total price of 30 euros + VAT) Wide range of regulation of hot water temperature and power modulation Compact dimensions and low weight Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Open Chamber Water Heater Ferroli ZEFIRO ECO C 14 Low NOx Methane - NEW Model: Zefiro Eco 14 Methane Item code GCA1PKAA ERP Class (Class G - A) A Load profile M Nominal heat input (Pn) kW 26.8 Useful power Min / Max kW 9.5 / 23.7 Maximum working pressure 10 bar Sanitary production: Δt 25°C l/min 13.9 Δt 30°C l/min 11.3 Sanitary temperature regulation Min / Max °C 40 / 65 Battery power supply New Ferroli ECO range EFFECTIVE The ECO range has been designed according to the stringent efficiency parameters of the European ErP Directive. In practice, they are able to produce a lot of hot water at a low cost, respecting the environment and with minimal polluting emissions. They can also be integrated into a solar thermal system with extreme simplicity for maximum efficiency and comfort. EASY ECO water heaters are extremely simple to install and are interchangeable with previous series. Although very compact in size, they have been designed and built in such a way as to have easy access to the internal components for easy maintenance. BEAUTIFUL AND SMART The designers of the ECO project have created a «friendly» aesthetic that can be easily integrated with the most diverse furnishing styles. The knob or button controls have been designed to be easy to use and immediately understood. All Ferroli gas water heaters are equipped with a user interface display. ZEFIRO ECO Wall mounted gas water heater with natural draft and open chamber, low nox type - Copper exchanger - Interface displays - Power modulation - Methane / LPG / Propane air - Solar systems - Battery powered STRENGTHS: Copper heat exchanger with finned tubes, externally finished with an aluminum anti-corrosion treatment Modulating heat input and fine adjustment of the outlet hot water temperature Easy and immediate reading display with indicators on the operation of the appliance and the charge of the power supply batteries. Adjustment of power and hot water temperature with comfortable ergonomic knobs Battery powered ADVANTAGES OF ZEFIRO ECO: Available for operation with Natural Gas, LPG and Propane Air (50% air - 50% G31 by means of a specific transformation to be requested from the authorized assistance center at the maximum total price of 30 euros + VAT) Wide range of regulation of hot water temperature and power modulation Compact dimensions and low weight Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Model : AtmoMAG mini 114/1 Z LPG Product code : 10022575 DHW energy efficiency class: A Ignition type: Piezoelectric Minimum power : 7.6 kW Maximum power : 18.1 kW Withdrawal rate: 11 l/min Flue connection diameter: 110 mm Gas - hydraulic pipes diameter: 1/2" - G1/2" Dimensions (HxWxD) 580x310x255 mm Vaillant AtmoMAG mini water heater Piezoelectric ignition water heaters. The ease of use, the compact dimensions, the simplicity of installation and the personalized management of the hot water make the atmoMAG XZ water heater the right choice for those looking for an excellent quality/price ratio without forgetting safety. AtmoMAG The cheapest and most flexible solution for quick and simplified replacements Comfort High hot water production Many models to satisfy every installation and ignition requirement savings Great reduction of gas consumption thanks to the flame self-modulation system Safety Reliability of every single component tested by Vaillant LabTest Heat exchanger with anti-thermal expansion system Simplicity Multiple selectable power levels It is controlled with only two knobs Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : AtmoMAG mini 144/1 Z Methane Product code : 10022576 DHW energy efficiency class: A Ignition type: Piezoelectric Minimum power : 9.7 kW Maximum power : 23.1 kW Withdrawal rate: 14 l/min Flue connection diameter: 130 mm Gas - hydraulic pipes diameter: 1/2" - G1/2" Dimensions (HxWxD) 680x350x270 mm Vaillant AtmoMAG mini water heater Piezoelectric ignition water heaters. The ease of use, the compact dimensions, the simplicity of installation and the personalized management of the hot water make the atmoMAG XZ water heater the right choice for those looking for an excellent quality/price ratio without forgetting safety. AtmoMAG The cheapest and most flexible solution for quick and simplified replacements Comfort High hot water production Many models to satisfy every installation and ignition need savings Great reduction of gas consumption thanks to the flame self-modulation system Safety Reliability of every single component tested by Vaillant LabTest Heat exchanger with anti-thermal expansion system Simplicity Multiple selectable power levels It is controlled with only two knobs Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less