Get customized comfort with wall mounted Fan Coils. Elegant design, efficient performance and precise temperature control. Choose from our selection of wall mounted Fan Coils for effective and silent heating and cooling.
Wall Mounted Fan Coil Fan Coils
Ferroli Fan Coil Fan Coil Ferroli Jolly Top I Inverter Vm350 6,30 Kw
Command excluded to be purchased separately (TE/TER) Fan Coil Fan Coil Ferroli Jolly Top I Inverter VM350 6.30 kW Power supply V-ph-Hz 230-1-50 Total cooling capacity max/med/min kW 3.50/2.89/2.22 Thermal power max/med/min 70/60 °C kW 7.68/6.3/4.74 General data Max/med/min air flow m³/h 595/470/340 Absorbed power max/med/min W 26/17/10 Sound power max/med/min dB(A) 52/44/36 Dimensions WxHxD mm 1240x495x200 JOLLY I New series of fan coils with centrifugal type fan with high efficiency brushless DC motor. Characterized by a maximum depth of 200 mm and in the version with casing by a particularly attractive aesthetic line, they are suitable for heating applications and residential air conditioning. Available in 5 sizes with cooling capacities from 1.50 to 5.60 kW and air flow rates from 255 to 1190 m3 /h. In the standard version they are offered with a single 3-row coil which can be combined as an accessory, in the case of 4-pipe systems, with an additional 1-row coil. Available in two versions, VM with cabinet and VN without cabinet for built-in applications. The units can be installed both in vertical and horizontal position Construction features - VM versions SUPPORTING STRUCTURE It is made of galvanized sheet metal of adequate thickness. On the back there are slots for fixing the device. For models without a covering casing, a closing panel for the fan group is provided, mounted on the front THERMAL EXCHANGE COIL 3-row coil in copper tube and aluminum fins blocked by mechanical expansion of the tubes. The manifolds in the upper part of the battery are equipped with air vents, while in the lower part they have a water drain valve*. * The default hydraulic connection for the coil is on the LEFT. However, it is possible to turn the coil and change it to the RIGHT (see Installation Manual). CONDENSATE COLLECTION TRAY optional Made of thermoplastic material to avoid corrosion phenomena, it allows the machine to be installed in both vertical and horizontal positions. In particular, in horizontal installation, its shape makes it possible to collect the drops of condensation that form on the collectors during cold operation. The drain hole is obtained directly from the condensate collection tray and allows it to be eliminated during cold operation. It is present on both sides of the machine to facilitate rotation of the battery FAN MOTOR (for version I) The electric motor is of the DC brushless type with high efficiency continuous speed regulation and is directly coupled to the fans and cushioned by elastic supports. AIR FILTER Easily removable and regenerable by simply washing with water. COVER (VM only) Partly made of steel sheet painted with epoxy powders to guarantee high resistance to corrosion and partly in anti-UV thermoplastic material to guarantee resistance to ultraviolet rays. The grilles for air diffusion and the door for accessing the control panel are inserted in the upper part, both in anti-UV thermoplastic material. HYDRAULIC CONNECTIONS The connections, positioned on the left side, are of the ¾” gas female type. It is possible to rotate the coil which is supplied standard with left side connections, moving the hydraulic connections to the right side. These new units are characterized by an elegant aesthetic line and by the multiple possibilities of insertion in different types of system. The mantellati models lend themselves to wall or niche solutions (raised or resting on feet), or suspended horizontally from the ceiling. The dismantled models are particularly suitable for concealed built-in solutions or inside false ceilings. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€438,00
-
Ferroli Fan Coil Fan Coil Ferroli Jolly Top 3v 250 Vm250k - New
OPTIONAL SWITCH Fan Coil Fan Coil Ferroli Jolly Top 3V 250 vm250K - NEW Power supply V-ph-Hz 230-1-50 Total cooling capacity max/med/min kW 2.65/2.02/1.4 Thermal power max/med/min kW 3,05/2,24/1,52 General Data Air flow max/med/min m³/h 400/273/180 Power consumption max/med/min W 47/26/14 Current consumption max/med/min A 0.20/0.11/0.06 Sound power max/med/min dB(A) 46/37/31 Dimensions HxWxD 495x1020x200 mm JOLLY 3V New series of fan coil units with centrifugal fan with 3-speed AC motor. Characterised by a maximum depth of 200 mm and in the version with casing by a particularly attractive aesthetic line, they are suitable for residential heating and air conditioning applications. Available in 5 sizes with cooling capacities from 1.65 to 6.00 kW and air flow rates from 255 to 1300 m3 /h. In the standard version they are offered with a single 3-row coil which can be combined as an accessory, in the case of 4-pipe systems, with an additional 1-row coil. Available in two versions, VM with casing and VN without casing for built-in applications. The units can be installed both vertically and horizontally. VM version Fan coil unit with bottom suction casing Composed of a sheet metal covering casing, a delivery grille with doors for access to any controls, in thermoplastic material and a regenerable air filter, placed on a metal frame housed on guides obtained in the lower part of the frame. Construction Features LOAD-BEARING STRUCTURE It is made of galvanized sheet metal of adequate thickness. On the rear part there are slots for fixing the appliance. For models without a covering casing, a closing panel for the ventilation unit is provided, mounted at the front HEAT EXCHANGE COIL 3-row coil made of copper pipe and aluminium finning blocked by mechanical expansion of the pipes. The collectors in the upper part of the coil are equipped with air vents, while in the lower part they have a water drain tap*. * The default hydraulic connection for the coil is on the LEFT. However, it is possible to turn the coil and change it to the RIGHT (see Installation Manual). CONDENSATE COLLECTION TRAY optional Made of thermoplastic material to prevent corrosion, it allows the machine to be installed either vertically or horizontally. In particular, in horizontal installation its shape allows it to collect the condensation drops that form on the collectors during cold operation. The drain hole is obtained directly from the condensation collection tray and allows its elimination during cold operation. It is present on both sides of the machine to facilitate the rotation of the battery FAN MOTOR (for version I) The electric motor is of the DC brushless type with continuous speed regulation with high efficiency and is directly coupled to the fans and cushioned by elastic supports. FAN MOTOR (for 3V version) The electric motor, protected from any overloads, has three speeds with a running capacitor always inserted, directly coupled to the fans and cushioned by elastic supports. CENTRIFUGAL FAN The fan unit is made up of double-intake centrifugal fans with blades developed in length to obtain high flow rate with a low number of revolutions. AIR FILTER Easily removable and regenerable by simply washing with water. COVERING (VM only) Made partly of steel sheet painted with epoxy powders to ensure high resistance to corrosion and partly of anti-UV thermoplastic material to ensure resistance to ultraviolet rays. The upper part includes the air diffusion grilles and the door to access the control panel, both in anti-UV thermoplastic material. HYDRAULIC CONNECTIONS The connections, positioned on the left side, are of the ¾” gas female type. It is possible to rotate the battery, which is supplied standard with left-hand side connections, by moving the hydraulic connections to the right side. These new units are characterized by an elegant aesthetic line and multiple possibilities for insertion in different types of systems. The cabinet models are suitable for wall or niche solutions (raised or supported on feet), or suspended horizontally from the ceiling. The dismantled models are particularly suitable for concealed solutions in built-in or inside false ceilings. Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.
€282,00
-
Ferroli Fan Coil Fan Coil Ferroli Jolly Top I Inverter Vm150 2.18 Kw
Command excluded to be purchased separately (TE/TER) Fan Coil Fan Coil Ferroli Jolly Top I Inverter VM150 2.18 kW Power supply V-ph-Hz 230-1-50 Total cooling capacity max/med/min kW 1.50/1.06/0.92 Thermal power max/med/min 70/60 °C kW 3.18/2.18/1.89 General data Max/med/min air flow m³/h 255/170/150 Absorbed power max/med/min W 15/9/ 8 Sound power max/med/min dB(A) 47/36/34 Dimensions WxHxD mm 790x495x200 JOLLY I New series of fan coils with centrifugal type fan with high efficiency brushless DC motor. Characterized by a maximum depth of 200 mm and in the version with casing by a particularly attractive aesthetic line, they are suitable for heating applications and residential air conditioning. Available in 5 sizes with cooling capacities from 1.50 to 5.60 kW and air flow rates from 255 to 1190 m3 /h. In the standard version they are offered with a single 3-row coil which can be combined as an accessory, in the case of 4-pipe systems, with an additional 1-row coil. Available in two versions, VM with cabinet and VN without cabinet for built-in applications. The units can be installed both in vertical and horizontal position Construction features - VM versions SUPPORTING STRUCTURE It is made of galvanized sheet metal of adequate thickness. On the back there are slots for fixing the device. For models without a covering casing, a closing panel for the fan group is provided, mounted on the front THERMAL EXCHANGE COIL 3-row coil in copper tube and aluminum fins blocked by mechanical expansion of the tubes. The manifolds in the upper part of the battery are equipped with air vents, while in the lower part they have a water drain valve*. * The default hydraulic connection for the coil is on the LEFT. However, it is possible to turn the coil and change it to the RIGHT (see Installation Manual). CONDENSATE COLLECTION TRAY optional Made of thermoplastic material to avoid corrosion phenomena, it allows the machine to be installed in both vertical and horizontal positions. In particular, in horizontal installation, its shape makes it possible to collect the drops of condensation that form on the collectors during cold operation. The drain hole is obtained directly from the condensate collection tray and allows it to be eliminated during cold operation. It is present on both sides of the machine to facilitate rotation of the battery FAN MOTOR (for version I) The electric motor is of the DC brushless type with high efficiency continuous speed regulation and is directly coupled to the fans and cushioned by elastic supports. AIR FILTER Easily removable and regenerable by simply washing with water. COVER (VM only) Partly made of steel sheet painted with epoxy powders to guarantee high resistance to corrosion and partly in anti-UV thermoplastic material to guarantee resistance to ultraviolet rays. The grilles for air diffusion and the door for accessing the control panel are inserted in the upper part, both in anti-UV thermoplastic material. HYDRAULIC CONNECTIONS The connections, positioned on the left side, are of the ¾” gas female type. It is possible to rotate the coil which is supplied standard with left side connections, moving the hydraulic connections to the right side. These new units are characterized by an elegant aesthetic line and by the multiple possibilities of insertion in different types of system. The mantellati models lend themselves to wall or niche solutions (raised or resting on feet), or suspended horizontally from the ceiling. The dismantled models are particularly suitable for concealed built-in solutions or inside false ceilings. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€330,00
-
Ferroli Fan Coil Fan Coil Ferroli Jolly Top I Inverter Vm250 4.28 Kw
Command excluded to be purchased separately (TE/TER) Fan Coil Fan Coil Ferroli Jolly Top I Inverter VM250 4.28 kW Power supply V-ph-Hz 230-1-50 Total cooling capacity max/med/min kW 2.35/1.94/1.19 Thermal power max/med/min 70/60 °C kW 5.26/4.28/2.71 General data Max/med/min air flow m³/h 400/315/190 Absorbed power max/med/min W 17/12/7 Sound power max/med/min dB(A) 43/37/29 Dimensions WxHxD mm 1020x495x200 JOLLY I New series of fan coils with centrifugal type fan with high efficiency brushless DC motor. Characterized by a maximum depth of 200 mm and in the version with casing by a particularly attractive aesthetic line, they are suitable for heating applications and residential air conditioning. Available in 5 sizes with cooling capacities from 1.50 to 5.60 kW and air flow rates from 255 to 1190 m3 /h. In the standard version they are offered with a single 3-row coil which can be combined as an accessory, in the case of 4-pipe systems, with an additional 1-row coil. Available in two versions, VM with cabinet and VN without cabinet for built-in applications. The units can be installed both in vertical and horizontal position Construction features - VM versions SUPPORTING STRUCTURE It is made of galvanized sheet metal of adequate thickness. On the back there are slots for fixing the device. For models without a covering casing, a closing panel for the fan group is provided, mounted on the front THERMAL EXCHANGE COIL 3-row coil in copper tube and aluminum fins blocked by mechanical expansion of the tubes. The manifolds in the upper part of the battery are equipped with air vents, while in the lower part they have a water drain valve*. * The default hydraulic connection for the coil is on the LEFT. However, it is possible to turn the coil and change it to the RIGHT (see Installation Manual). CONDENSATE COLLECTION TRAY optional Made of thermoplastic material to avoid corrosion phenomena, it allows the machine to be installed in both vertical and horizontal positions. In particular, in horizontal installation its shape allows to collect the drops of condensation that form on the collectors during cold operation. The drain hole is obtained directly from the condensate collection tray and allows it to be eliminated during cold operation. It is present on both sides of the machine to facilitate rotation of the battery FAN MOTOR (for version I) The electric motor is of the DC brushless type with high efficiency continuous speed regulation and is directly coupled to the fans and cushioned by elastic supports. AIR FILTER Easily removable and regenerable by simply washing with water. COVER (VM only) Partly made of steel sheet painted with epoxy powders to guarantee high resistance to corrosion and partly in anti-UV thermoplastic material to guarantee resistance to ultraviolet rays. The grilles for air diffusion and the door for accessing the control panel are inserted in the upper part, both in anti-UV thermoplastic material. HYDRAULIC CONNECTIONS The connections, positioned on the left side, are of the ¾” gas female type. It is possible to rotate the coil which is supplied standard with left side connections, moving the hydraulic connections to the right side. These new units are characterized by an elegant aesthetic line and by the multiple possibilities of insertion in different types of system. The mantellati models lend themselves to wall or niche solutions (raised or resting on feet), or suspended horizontally from the ceiling. The dismantled models are particularly suitable for concealed built-in solutions or inside false ceilings. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€385,00
-
Ferroli Fan Coil Fan Coil Ferroli Jolly Top I Inverter Vm500 7.48 Kw
Command excluded to be purchased separately (TE/TER) Fan Coil Fan Coil Ferroli Jolly Top I Inverter VM500 7.48 kW Power supply V-ph-Hz 230-1-50 Total cooling capacity max/med/min kW 4.30/3.48/2.71 Thermal power max/med/min 70/60 °C kW 9.47/7.48/5.75 General data Max/med/min air flow m³/h 790/580/410 Absorbed power max/med/min W 50/25/14 Sound power max/med/min dB(A) 59/51/43 Dimensions WxHxD mm 1240x495x200 JOLLY I New series of fan coils with centrifugal type fan with high efficiency brushless DC motor. Characterized by a maximum depth of 200 mm and in the version with casing by a particularly attractive aesthetic line, they are suitable for heating applications and residential air conditioning. Available in 5 sizes with cooling capacities from 1.50 to 5.60 kW and air flow rates from 255 to 1190 m3 /h. In the standard version they are offered with a single 3-row coil which can be combined as an accessory, in the case of 4-pipe systems, with an additional 1-row coil. Available in two versions, VM with cabinet and VN without cabinet for built-in applications. The units can be installed both in vertical and horizontal position Construction features - VM versions SUPPORTING STRUCTURE It is made of galvanized sheet metal of adequate thickness. On the back there are slots for fixing the device. For models without a covering casing, a closing panel for the fan group is provided, mounted on the front THERMAL EXCHANGE COIL 3-row coil in copper tube and aluminum fins blocked by mechanical expansion of the tubes. The manifolds in the upper part of the battery are equipped with air vents, while in the lower part they have a water drain valve*. * The default hydraulic connection for the battery is on the LEFT. However, it is possible to turn the coil and change it to the RIGHT (see Installation Manual). CONDENSATE COLLECTION TRAY optional Made of thermoplastic material to avoid corrosion phenomena, it allows the machine to be installed in both vertical and horizontal positions. In particular, in horizontal installation its shape allows to collect the drops of condensation that form on the collectors during cold operation. The drain hole is obtained directly from the condensate collection tray and allows it to be eliminated during cold operation. It is present on both sides of the machine to facilitate rotation of the battery FAN MOTOR (for version I) The electric motor is of the DC brushless type with high efficiency continuous speed regulation and is directly coupled to the fans and cushioned by elastic supports. AIR FILTER Easily removable and regenerable by simply washing with water. COVER (VM only) Partly made of steel sheet painted with epoxy powders to guarantee high resistance to corrosion and partly in anti-UV thermoplastic material to guarantee resistance to ultraviolet rays. The grilles for air diffusion and the door for accessing the control panel are inserted in the upper part, both in anti-UV thermoplastic material. HYDRAULIC CONNECTIONS The connections, positioned on the left side, are of the ¾” gas female type. It is possible to rotate the coil which is supplied standard with left side connections, moving the hydraulic connections to the right side. These new units are characterized by an elegant aesthetic line and by the multiple possibilities of insertion in different types of system. The mantellati models lend themselves to wall or niche solutions (raised or resting on feet), or suspended horizontally from the ceiling. The dismantled models are particularly suitable for concealed built-in solutions or inside false ceilings. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€449,00
-
Ferroli Fan Coil Fan Coil Ferroli Top Fan Plus Mod VM-B 50 + Free CM-F Switch
Technical features Model : VM-B 50 Number of fans : 2 CM-F switch included Performance Power supply (V,Hz, Ø) : 220~240/50/1 Cooling power : 2390 ~ 3400W Heating power : 4930 ~ 7800W Dehumidification: 1150g/h Air flow : 350 ~ 615 m3/h Sound power : 36 ~ 51 db(A) Sound pressure : 27 ~ 42 db(A) Installation data Main battery connections: 3/4" Additional battery connections: 1/2 " Main battery water content: 1.88 litres Additional battery water content: 0.50 litres Dimensions and weight Dimensions (HxWxD): 554+100x1190x 220mm Weight : 27.0kg Ferroli TOP FAN PLUS fan coil Consisting of a fan, a heat exchange element and a filter, fan coil units are ideal machines for summer air conditioning and winter heating of the house and any room. Fed with chilled water from a cooler, they make the air in the room fresh, dry and clean in a very short time and with great energy efficiency; fed with hot water from a heat pump or boiler, they provide clean and economical heat during the winter season. Series with centrifugal fan, available in 9 sizes and three versions: VM-B with casing for vertical and horizontal installation and suction from below VM-F with casing for vertical and horizontal installation and front suction VN without casing for vertical and horizontal installation Characteristics Cover cabinet obtained by integrating parts in plastic material and parts in galvanized sheet metal, oven painted with epoxy powders Supporting structure in galvanized steel Finned pack heat exchange coil with aluminum fins and copper pipes, brass manifolds specially designed to guarantee low pressure drops Air filter easy to remove and clean, regenerable by washing or blowing Fan unit with three-speed motor and aluminum impellers Wide range of controls both to be installed on the machine and remote on the wall New version with infrared remote control Switch It has a selector for the Summer / Off / Winter function, while the second selects the Min / Med / Max fan speed. Available in two different versions: - for installation on CM-F cabinet - for CMR-F remote installation Two series of panels are available for this type of installation: ON THE MACHINE for installation of the fan coil on the floor (models VM-B, VM-F), REMOTE ON THE WALL for installation of the fan coil on the ceiling (models VM-B, VM- F) or false ceiling (model VN). Each of the series includes three types of control, switch, basic thermostat and advanced thermostat. Novelty Remote control Optional Infrared remote control, for all sizes and versions, with liquid crystal display complete with support bracket for wall mounting, which allows the following functions: Power on Power off Operating modes (Hot/Cool/AutoChange Over/Ventilation only - presence of valves required-) Fan speed (Max/Med/Min/Auto) Set point temperature Timer setting °C or °F temperature scale setting Visible receiver Located on the front panel of the unit, it is complete with Timer led (yellow), operating led (green) and emergency ON/OFF button and reception area. The system completes with the card inside the unit. The system is supplied already installed and tested in the company. Recessed wall receiver The receiver is supplied in the case of recessed units and is positioned visible on the false ceiling. It is complete with a yellow Timer led, a green operating led and an emergency ON/OFF and reception area button. It is supplied with a multipolar cable of a maximum length of 0.8 metres, for quick connection and with the electronic card to be installed on the unit. It can be removed from the machine; the testing of the system takes place in the company while the positioning of the receiver is the responsibility of the installer. Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€215,00€182,00
-
Ferroli Offer - Fan Coil Ferroli Top Fan Plus Mod Vm-B 80 + Commutator Cm-F
COMPLETE WITH CM-F ON/OFF CABINET SWITCH FAN COIL FAN COIL FERROLI TOP FAN PLUS mod. VM-B 80 + free CM-F switch Max-min cooling capacity: 4900-3600 W Max-min heat output: 12500-8300W Dehumidification: 1600g/h Max-min air flow: 1050-570 m3/h No. of fans: 2 Max-min sound power: 62-48 db(A) Max-min sound pressure: 53-39 db(A) 3R main battery connections: 3/4" 1R extra battery connections: 1/2 " Water content batt.3R: 1.88 l Water content batt.1R: 0.50 l Power supply: 230-1-50 [VF-Hz] Dimensions (HxWxD): 554+100 x 1190 x 220 mm; 27kg Notes : Heating: temp. Ambient air: 20°C; temp. Inlet water: 70°C, Δt water 10°C at maximum fan speed; for medium and minimum fan speed, water flow rate as in maximum speed. Cooling: temp. Room Air: 27°C DB 19°C WBtemp. Inlet water: 7°C, Δt water 5°C at maximum fan speed; for medium and minimum fan speed, water flow rate as in maximum speed. TOP FAN PLUS Consisting of a fan, a heat exchange element and a filter, fan coil units are ideal machines for summer air conditioning and winter heating of the house and any room. Fed with chilled water from a cooler, they make the air in the room fresh, dry and clean in a very short time and with great energy efficiency; fed with hot water from a heat pump or boiler, they provide clean and economical heat during the winter season. Series with centrifugal fan, available in 9 sizes and three versions: VM-B with casing for vertical and horizontal installation and suction from below VM-F with casing for vertical and horizontal installation and front suction VN without casing for vertical and horizontal installation Characteristics: Cover cabinet obtained by integrating parts in plastic material and parts in galvanized sheet metal, oven painted with epoxy powders Supporting structure in galvanized steel Finned pack heat exchange coil with aluminum fins and copper pipes, brass manifolds specially designed to guarantee low pressure drops Air filter easy to remove and clean, regenerable by washing or blowing Fan unit with three-speed motor and aluminum impellers Wide range of controls both to be installed on the machine and remote on the wall SWITCH: It has a selector for the Summer / Off / Winter function, while the second selects the Min / Med / Max fan speed. Available in two different versions: - for installation on CM-F cabinet - for CMR-F remote installation Two series of panels are available for this type of installation: ON THE MACHINE for installation of the fan coil on the floor (models VM-B, VM-F), REMOTE ON THE WALL for installation of the fan coil on the ceiling (models VM-B, VM- F) or false ceiling (model VN). Each of the series includes three types of control, switch, basic thermostat and advanced thermostat. NEW (OPTIONAL) REMOTE CONTROL Infrared remote control (for all sizes and versions) with liquid crystal display complete with support bracket for wall mounting, which allows the following functions: Switching on\Switching off Operating modes (Hot/Cool/AutoChange Over/Ventilation only - presence of valves required-) Fan speed (Max/Med/Min/Auto) Set point temperature Timer setting °C or °F temperature scale setting VISIBLE RECEIVER Located on the front panel of the unit, it is complete with Timer led (yellow), operating led (green) and emergency ON/OFF and reception zone key. The system completes with the card inside the unit. The system is supplied already installed and tested in the company. WALL-MOUNTED RECEIVER (FLUSH MOUNTING) The receiver is supplied in the case of recessed units and is positioned visible on the false ceiling. It is complete with Timer led (yellow), operating led (green) and button for emergency ON/OFF and reception area. It is supplied with a multipolar cable (max length 0.8 metres) for rapid connection and with the electronic board to be installed on the unit. It can be removed from the machine; the testing of the system takes place in the company while the positioning of the receiver is the responsibility of the installer. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€270,00€220,00
-
Ferroli Offer - Fan Coil Ferroli Top Fan Plus Mod Vm-B 60 + Commutator Cm-F
COMPLETE WITH CM-F ON/OFF CABINET SWITCH FAN COIL FAN COIL FERROLI TOP FAN PLUS mod. VM-B 60 + free CM-F switch Max-min cooling capacity: 4000-2800W Max-min heat output: 9400-5800W Dehumidification: 1550g/h Max-min air flow: 750-410 m3/h No. of fans: 2 Max-min sound power: 55-38 db(A) Max-min sound pressure: 46-29 db(A) 3R main battery connections: 3/4" 1R extra battery connections: 1/2 " Water content batt.3R: 1.88 l Water content batt.1R: 0.50 l Power supply: 230-1-50 [VF-Hz] Dimensions (HxWxD): 554+100 x 1190 x 220 mm; 27kg Notes : Heating: temp. Ambient air: 20°C; temp. Inlet water: 70°C, Δt water 10°C at maximum fan speed; for medium and minimum fan speed, water flow rate as in maximum speed. Cooling: temp. Room Air: 27°C DB 19°C WBtemp. Inlet water: 7°C, Δt water 5°C at maximum fan speed; for medium and minimum fan speed, water flow rate as in maximum speed. TOP FAN PLUS Consisting of a fan, a heat exchange element and a filter, fan coil units are ideal machines for summer air conditioning and winter heating of the house and any room. Fed with chilled water from a cooler, they make the air in the room fresh, dry and clean in a very short time and with great energy efficiency; fed with hot water from a heat pump or boiler, they provide clean and economical heat during the winter season. Series with centrifugal fan, available in 9 sizes and three versions: VM-B with casing for vertical and horizontal installation and suction from below VM-F with casing for vertical and horizontal installation and front suction VN without casing for vertical and horizontal installation Characteristics: Cover cabinet obtained by integrating parts in plastic material and parts in galvanized sheet metal, oven painted with epoxy powders Supporting structure in galvanized steel Finned pack heat exchange coil with aluminum fins and copper pipes, brass manifolds specially designed to guarantee low pressure drops Air filter easy to remove and clean, regenerable by washing or blowing Fan unit with three-speed motor and aluminum impellers Wide range of controls both to be installed on the machine and remote on the wall SWITCH: It has a selector for the Summer / Off / Winter function, while the second selects the Min / Med / Max fan speed. Available in two different versions: - for installation on CM-F cabinet - for CMR-F remote installation Two series of panels are available for this type of installation: ON THE MACHINE for installation of the fan coil on the floor (models VM-B, VM-F), REMOTE ON THE WALL for installation of the fan coil on the ceiling (models VM-B, VM- F) or false ceiling (model VN). Each of the series includes three types of control, switch, basic thermostat and advanced thermostat. NEW (OPTIONAL) REMOTE CONTROL Infrared remote control (for all sizes and versions) with liquid crystal display complete with support bracket for wall mounting, which allows the following functions: Switching on\Switching off Operating modes (Hot/Cool/AutoChange Over/Ventilation only - presence of valves required-) Fan speed (Max/Med/Min/Auto) Set point temperature Timer setting °C or °F temperature scale setting VISIBLE RECEIVER Located on the front panel of the unit, it is complete with Timer led (yellow), operating led (green) and emergency ON/OFF and reception zone key. The system completes with the card inside the unit. The system is supplied already installed and tested in the company. WALL-MOUNTED RECEIVER (FLUSH MOUNTING) The receiver is supplied in the case of recessed units and is positioned visible on the false ceiling. It is complete with Timer led (yellow), operating led (green) and button for emergency ON/OFF and reception area. It is supplied with a multipolar cable (max length 0.8 metres) for rapid connection and with the electronic board to be installed on the unit. It can be removed from the machine; the testing of the system takes place in the company while the positioning of the receiver is the responsibility of the installer. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€266,00€210,00
-
Ferroli Offer - Fan Coil Fan Coil Ferroli Top Fan Plus Mod Vm-B 20 With Switch Cm-F Included
COMPLETE WITH CM-F ON/OFF CABINET SWITCH FAN COIL FAN COIL FERROLI TOP FAN PLUS mod. VM-B 20 + free CM-F switch Max-min cooling capacity: 1400-950W Max-min heat output: 3650-2250W Dehumidification: 490g/h Max-min air flow: 280-140 m3/h No. of fans: 1 Max-min sound power: 47-35 db(A) Max-min sound pressure: 38-26 db(A) 3R main battery connections: 3/4" 1R extra battery connections: 1/2 " Water content batt.3R: 0.82l Water content batt.1R: 0.22l Power supply: 230-1-50 [VF-Hz] Dimensions (HxWxD): 554+100 x 690 x 220 mm; 14kg Notes : Heating: temp. Ambient air: 20°C; temp. Inlet water: 70°C, Δt water 10°C at maximum fan speed; for medium and minimum fan speed, water flow rate as in maximum speed. Cooling: temp. Room Air: 27°C DB 19°C WBtemp. Inlet water: 7°C, Δt water 5°C at maximum fan speed; for medium and minimum fan speed, water flow rate as in maximum speed. TOP FAN PLUS Consisting of a fan, a heat exchange element and a filter, fan coil units are ideal machines for summer air conditioning and winter heating of the house and any room. Fed with chilled water from a cooler, they make the air in the room fresh, dry and clean in a very short time and with great energy efficiency; fed with hot water from a heat pump or boiler, they provide clean and economical heat during the winter season. Series with centrifugal fan, available in 9 sizes and three versions: VM-B with casing for vertical and horizontal installation and suction from below VM-F with casing for vertical and horizontal installation and front suction VN without casing for vertical and horizontal installation Characteristics: Cover cabinet obtained by integrating parts in plastic material and parts in galvanized sheet metal, oven painted with epoxy powders Supporting structure in galvanized steel Finned pack heat exchange coil with aluminum fins and copper pipes, brass manifolds specially designed to guarantee low pressure drops Air filter easy to remove and clean, regenerable by washing or blowing Fan unit with three-speed motor and aluminum impellers Wide range of controls both to be installed on the machine and remote on the wall New version with infrared remote control SWITCH: It has a selector for the Summer / Off / Winter function, while the second selects the Min / Med / Max fan speed. Available in two different versions: - for installation on CM-F cabinet - for CMR-F remote installation Two series of panels are available for this type of installation: ON THE MACHINE for installation of the fan coil on the floor (models VM-B, VM-F), REMOTE ON THE WALL for installation of the fan coil on the ceiling (models VM-B, VM- F) or false ceiling (model VN). Each of the series includes three types of control, switch, basic thermostat and advanced thermostat. NEW (OPTIONAL) REMOTE CONTROL Infrared remote control (for all sizes and versions) with liquid crystal display complete with support bracket for wall mounting, which allows the following functions: Switching on\Switching off Operating modes (Hot/Cool/AutoChange Over/Ventilation only - presence of valves required-) Fan speed (Max/Med/Min/Auto) Set point temperature Timer setting °C or °F temperature scale setting VISIBLE RECEIVER Located on the front panel of the unit, it is complete with Timer led (yellow), operating led (green) and emergency ON/OFF and reception zone key. The system completes with the card inside the unit. The system is supplied already installed and tested in the company. WALL-MOUNTED RECEIVER (FLUSH MOUNTING) The receiver is supplied in the case of recessed units and is positioned visible on the false ceiling. It is complete with Timer led (yellow), operating led (green) and button for emergency ON/OFF and reception area. It is supplied with a multipolar cable (max length 0.8 metres) for quick connection and with the electronic board to be installed on the unit. It can be removed from the machine; the testing of the system takes place in the company while the positioning of the receiver is the responsibility of the installer. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€178,00
-
Ferroli Fan Coil Ferroli Top Fan Plus Mod VM-B 30 + Free CM-F Switch
COMPLETE WITH CM-F ON/OFF CABINET SWITCH FAN COIL FAN COIL FERROLI TOP FAN PLUS mod. VM-B 30 + free CM-F switch Cooling capacity max-min: 2100-1450 W Max-min heat output: 5500-3400W Dehumidification: 670g/h Max-min air flow: 410-220 m3/h No. of fans: 1 Max-min sound power: 50-36 db(A) Max-min sound pressure: 41-27 db(A) 3R main battery connections: 3/4" 1R extra battery connections: 1/2 " Water content batt.3R: 1.26 l Water content batt.1R: 0.36 l Power supply: 230-1-50 [VF-Hz] Dimensions (HxWxD): 554+100 x 940 x 220 mm; 20kg Notes : Heating: temp. Ambient air: 20°C; temp. Inlet water: 70°C, Δt water 10°C at maximum fan speed; for medium and minimum fan speed, water flow rate as in maximum speed. Cooling: temp. Room Air: 27°C DB 19°C WBtemp. Inlet water: 7°C, Δt water 5°C at maximum fan speed; for medium and minimum fan speed, water flow rate as in maximum speed. TOP FAN PLUS Consisting of a fan, a heat exchange element and a filter, fan coil units are ideal machines for summer air conditioning and winter heating of the house and any room. Fed with chilled water from a cooler, they make the air in the room fresh, dry and clean in a very short time and with great energy efficiency; fed with hot water from a heat pump or boiler, they provide clean and economical heat during the winter season. Series with centrifugal fan, available in 9 sizes and three versions: VM-B with casing for vertical and horizontal installation and suction from below VM-F with casing for vertical and horizontal installation and front suction VN without casing for vertical and horizontal installation Characteristics: Cover cabinet obtained by integrating parts in plastic material and parts in galvanized sheet metal, oven painted with epoxy powders Supporting structure in galvanized steel Finned pack heat exchange coil with aluminum fins and copper pipes, brass manifolds specially designed to guarantee low pressure drops Air filter easy to remove and clean, regenerable by washing or blowing Fan unit with three-speed motor and aluminum impellers Wide range of controls both to be installed on the machine and remote on the wall SWITCH: It has a selector for the Summer / Off / Winter function, while the second selects the Min / Med / Max fan speed. Available in two different versions: - for installation on CM-F cabinet - for CMR-F remote installation Two series of panels are available for this type of installation: ON THE MACHINE for installation of the fan coil on the floor (models VM-B, VM-F), REMOTE ON THE WALL for installation of the fan coil on the ceiling (models VM-B, VM- F) or false ceiling (model VN). Each of the series includes three types of control, switch, basic thermostat and advanced thermostat. NEW (OPTIONAL) REMOTE CONTROL Infrared remote control (for all sizes and versions) with liquid crystal display complete with support bracket for wall mounting, which allows the following functions: Switching on\Switching off Operating modes (Hot/Cool/AutoChange Over/Ventilation only - presence of valves required-) Fan speed (Max/Med/Min/Auto) Set point temperature Timer setting °C or °F temperature scale setting VISIBLE RECEIVER Located on the front panel of the unit, it is complete with Timer led (yellow), operating led (green) and emergency ON/OFF and reception zone key. The system completes with the card inside the unit. The system is supplied already installed and tested in the company. WALL-MOUNTED RECEIVER (FLUSH MOUNTING) The receiver is supplied in the case of recessed units and is positioned visible on the false ceiling. It is complete with Timer led (yellow), operating led (green) and button for emergency ON/OFF and reception area. It is supplied with a multipolar cable (max length 0.8 metres) for quick connection and with the electronic board to be installed on the unit. It can be removed from the machine; the testing of the system takes place in the company while the positioning of the receiver is the responsibility of the installer. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€195,00
-
Ferroli Offer - Fan Coil Ferroli Top Fan Plus Mod Vm-B 120 + Commutator Cm-F
COMPLETE WITH CM-F ON/OFF CABINET SWITCH FAN COIL FAN COIL FERROLI TOP FAN PLUS mod. VM-B 120 + free CM-F switch Max-min cooling capacity: 6850-5000W Max-min heat output: 15800-10000W Dehumidification: 2200g/h Max-min air flow: 1350-720 m3/h No. of fans: 2 Max-min sound power: 64-51 db(A) Max-min sound pressure: 55-42 db(A) 3R main battery connections: 3/4" 1R extra battery connections: 1/2 " Water content batt.3R: 2.42 l Water content batt.1R: 0.64 l Power supply: 230-1-50 [VF-Hz] Dimensions (HxWxD): 554+100 x 1440 x 220 mm; 34kg Notes : Heating: temp. Ambient air: 20°C; temp. Inlet water: 70°C, Δt water 10°C at maximum fan speed; for medium and minimum fan speed, water flow rate as in maximum speed. Cooling: temp. Room Air: 27°C DB 19°C WBtemp. Inlet water: 7°C, Δt water 5°C at maximum fan speed; for medium and minimum fan speed, water flow rate as in maximum speed. TOP FAN PLUS Consisting of a fan, a heat exchange element and a filter, fan coil units are ideal machines for summer air conditioning and winter heating of the house and any room. Fed with chilled water from a cooler, they make the air in the room fresh, dry and clean in a very short time and with great energy efficiency; fed with hot water from a heat pump or boiler, they provide clean and economical heat during the winter season. Series with centrifugal fan, available in 9 sizes and three versions: VM-B with casing for vertical and horizontal installation and suction from below VM-F with casing for vertical and horizontal installation and front suction VN without casing for vertical and horizontal installation Characteristics: Cover cabinet obtained by integrating parts in plastic material and parts in galvanized sheet metal, oven painted with epoxy powders Supporting structure in galvanized steel Finned pack heat exchange coil with aluminum fins and copper pipes, brass manifolds specially designed to guarantee low pressure drops Air filter easy to remove and clean, regenerable by washing or blowing Fan unit with three-speed motor and aluminum impellers Wide range of controls both to be installed on the machine and remote on the wall SWITCH: It has a selector for the Summer / Off / Winter function, while the second selects the Min / Med / Max fan speed. Available in two different versions: - for installation on CM-F cabinet - for CMR-F remote installation Two series of panels are available for this type of installation: ON THE MACHINE for installation of the fan coil on the floor (models VM-B, VM-F), REMOTE ON THE WALL for installation of the fan coil on the ceiling (models VM-B, VM- F) or false ceiling (model VN). Each of the series includes three types of control, switch, basic thermostat and advanced thermostat. NEW (OPTIONAL) REMOTE CONTROL Infrared remote control (for all sizes and versions) with liquid crystal display complete with support bracket for wall mounting, which allows the following functions: Switching on\Switching off Operating modes (Hot/Cool/AutoChange Over/Ventilation only - presence of valves required-) Fan speed (Max/Med/Min/Auto) Set point temperature Timer setting °C or °F temperature scale setting VISIBLE RECEIVER Located on the front panel of the unit, it is complete with Timer led (yellow), operating led (green) and emergency ON/OFF and reception zone key. The system completes with the card inside the unit. The system is supplied already installed and tested in the company. WALL-MOUNTED RECEIVER (FLUSH MOUNTING) The receiver is supplied in the case of recessed units and is positioned visible on the false ceiling. It is complete with Timer led (yellow), operating led (green) and button for emergency ON/OFF and reception area. It is supplied with a multipolar cable (max length 0.8 metres) for rapid connection and with the electronic board to be installed on the unit. It can be removed from the machine; the testing of the system takes place in the company while the positioning of the receiver is the responsibility of the installer. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€300,00€240,00
-
Ferroli Fan Coil Fan Coil Ferroli Top Fan Plus Mod VM-B 15 + Free CM-F Switch
COMPLETE WITH CM-F ON/OFF CABINET SWITCH OFFER Fan Coil Fan Coil Ferroli Top Fan Plus Mod VM-B 15 + Free CM-F Switch Power 2.8 kW Dimensions (HxWxD): 690x554x220 mm; 14 Kgs It is recommended for rooms up to 20 m2 and can be installed on the wall or ceiling. TOP FAN PLUS Consisting of a fan, a heat exchange element and a filter, fan coil units are ideal machines for summer air conditioning and winter heating of the house and any room. Fed with chilled water from a cooler, they make the air in the room fresh, dry and clean in a very short time and with great energy efficiency; fed with hot water from a heat pump or boiler, they provide clean and economical heat during the winter season. Series with centrifugal fan, available in 9 sizes and three versions: VM-B with casing for vertical and horizontal installation and suction from below VM-F with casing for vertical and horizontal installation and front suction VN without casing for vertical and horizontal installation Characteristics: Cover cabinet obtained by integrating parts in plastic material and parts in galvanized sheet metal, oven painted with epoxy powders Supporting structure in galvanized steel Finned pack heat exchange coil with aluminum fins and copper pipes, brass manifolds specially designed to guarantee low pressure drops Air filter easy to remove and clean, regenerable by washing or blowing Fan unit with three-speed motor and aluminum impellers Wide range of controls both to be installed on the machine and remote on the wall New version with infrared remote control SWITCH: It has a selector for the Summer / Off / Winter function, while the second selects the Min / Med / Max fan speed. Available in two different versions: - for installation on CM-F cabinet - for CMR-F remote installation Two series of panels are available for this type of installation: ON THE MACHINE for installation of the fan coil on the floor (models VM-B, VM-F), REMOTE ON THE WALL for installation of the fan coil on the ceiling (models VM-B, VM- F) or false ceiling (model VN). Each of the series includes three types of control, switch, basic thermostat and advanced thermostat. NEW (OPTIONAL) REMOTE CONTROL Infrared remote control (for all sizes and versions) with liquid crystal display complete with support bracket for wall mounting, which allows the following functions: Power on Power off Operating modes (Hot/Cool/AutoChange Over/Ventilation only - presence of valves required-) Fan speed (Max/Med/Min/Auto) Set point temperature Timer setting °C or °F temperature scale setting VISIBLE RECEIVER Located on the front panel of the unit, it is complete with Timer led (yellow), operating led (green) and emergency ON/OFF and reception zone key. The system completes with the card inside the unit. The system is supplied already installed and tested in the company. WALL-MOUNTED RECEIVER (FLUSH MOUNTING) The receiver is supplied in the case of recessed units and is positioned visible on the false ceiling. It is complete with Timer led (yellow), operating led (green) and button for emergency ON/OFF and reception area. It is supplied with a multipolar cable (max length 0.8 metres) for rapid connection and with the electronic board to be installed on the unit. It can be removed from the machine; the testing of the system takes place in the company while the positioning of the receiver is the responsibility of the installer. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€169,00
