Technical features Model : T FALKO HI-WALL 700 HW Code : THM07A Performance: Cooling Power: 3330 W Heating power: 4230 W Air Flow : 680 m 3 /h Water Flow : 9,7 ~ 12 l/min Sound Pressure Level : 37 ~ 43 dB(A) Characteristics: Power supply (V,Hz, Ø) : 220~240/50/1 Electric Consumption : 46 W Maximum Current : 0.25A Maximum pressure : 1.6MPa Installation data: Pipe diameter : 12.70 mm RC (1/2") Dimensions and weight: Internal Unit Dimensions (LxHxP): 850x300x198 mm Empty weight : 13 Kg IdealClima hydronic terminals FALKO Comfosplit Hydronic with Hydrosilence Technology. Silent and Advanced Solutions Falko HW is the hydronic terminal which, in compact dimensions and captivating aesthetics, contains technologies that are ideal for obtaining thermal and acoustic comfort in residential environments. In fact, Falko HW is distinguished by a high-performance heat exchange battery and a fan unit with a three-phase permanent magnet brushless motor controlled with current reconstructed according to a sine wave (the motor is thus called the "ECM" type): comfort and efficiency Elegant and Modern Design The Falko HW design, characterized by a white ABS front panel with elegant chromed details, is designed to integrate into any type of environment. The integrated air outlet is equipped with a motorized deflector. The front panel is complete with a display showing the operating status and the temperature. Supplied as standard, the infrared remote control allows control of the terminal and the setting of "night reduction". The tangential fan is low noise The effectiveness of hydronic rationality Falko HW represents the new generation of fan coils designed with the aim of offering performance and design at the top of its category. Falko HW also means innovation in terms of design, to guarantee absolutely excellent sound performance with the advantage of an exclusive design that goes well with both residential and commercial use. The design covering cabinet has a white color, with front panel, sides, upper grille and side doors made of stabilized ABS Hot and cold only when needed Falko HW guarantees, with its efficiency and quick response, the living comfort standards necessary for modern life, based on a discontinuous presence in homes. With a single appliance, both heating and cooling needs can be satisfied, especially in reversible heat pump systems Falko HW ensures higher quality of the air that is introduced into the environment, well filtered by the standard fine-mesh filter: in fact, it guarantees constant ventilation, which allows for greater cleaning of the air and considerable hygiene in the environments Easy to Install Falko HW can be installed easily, quickly and in any condition. In fact, it matches perfectly with the ordinary gas split predisposition boxes (H.int>10cm). The convenient sheet metal fixing plate also acts as a template for quick installation. The solid hinge that is obtained facilitates connection and allows easy maintenance (e.g. hydraulic system air vent) Semi-transparent display Elegant transparent display of the latest generation, does not interrupt the product lines Infrared receiver Managed with the standard remote control, with ease of installation and operation Elegant Finishes Refined details such as the soft lines and the thin chromed edge make it even more suitable for environments where nothing is left to chance High Power Even in the most thermally demanding situations, Falko is able to deliver all the power needed to guarantee comfort Characteristics Heating, cooling and dehumidifying environments. Emitting power with high efficiency at high as well as low flow temperatures (excellent for heat pump systems). Combine with both traditional boilers, as well as condensing boilers, solar systems and heat pumps Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : T FALKO HI-WALL 500 HW Code : THM05A Performance: Cooling Power: 2570 W Heating power: 3265 W Air Flow : 510 m 3 /h Water Flow : 7.5 ~ 9.3 l/min Sound Pressure Level : 36 ~ 42 dB(A) Characteristics: Power supply (V,Hz, Ø) : 220~240/50/1 Electric Consumption : 31 W Maximum Current : 0.18A Maximum pressure : 1.6MPa Installation data: Pipe diameter : 12.70 mm RC (1/2") Dimensions and weight: Internal Unit Dimensions (LxHxP): 850x300x198 mm Empty weight: 12 Kg IdealClima hydronic terminals FALKO Comfosplit Hydronic with Hydrosilence Technology. Silent and Advanced Solutions Falko HW is the hydronic terminal which, in compact dimensions and captivating aesthetics, contains technologies that are ideal for obtaining thermal and acoustic comfort in residential environments. In fact, Falko HW is distinguished by a high-performance heat exchange battery and a fan unit with a three-phase permanent magnet brushless motor controlled with current reconstructed according to a sine wave (the motor is thus called the "ECM" type): comfort and efficiency Elegant and Modern Design The Falko HW design, characterized by a white ABS front panel with elegant chromed details, is designed to integrate into any type of environment. The integrated air outlet is equipped with a motorized deflector. The front panel is complete with a display showing the operating status and the temperature. Supplied as standard, the infrared remote control allows control of the terminal and the setting of "night reduction". The tangential fan is low noise The effectiveness of hydronic rationality Falko HW represents the new generation of fan coils designed with the aim of offering performance and design at the top of its category. Falko HW also means innovation in terms of design, to guarantee absolutely excellent sound performance with the advantage of an exclusive design that goes well with both residential and commercial use. The design covering cabinet has a white color, with front panel, sides, upper grille and side doors made of stabilized ABS Hot and cold only when needed Falko HW guarantees, with its efficiency and quick response, the living comfort standards necessary for modern life, based on a discontinuous presence in homes. With a single appliance, both heating and cooling needs can be satisfied, especially in reversible heat pump systems Falko HW ensures higher quality of the air that is introduced into the environment, well filtered by the standard fine-mesh filter: in fact, it guarantees constant ventilation, which allows for greater cleaning of the air and considerable hygiene in the environments Easy to Install Falko HW can be installed easily, quickly and in any condition. In fact, it matches perfectly with the ordinary gas split predisposition boxes (H.int>10cm). The convenient sheet metal fixing plate also acts as a template for quick installation. The solid hinge that is obtained facilitates connection and allows easy maintenance (e.g. hydraulic system air vent) Semi-transparent display Elegant transparent display of the latest generation, does not interrupt the product lines Infrared receiver Managed with the standard remote control, with ease of installation and operation Elegant Finishes Refined details such as the soft lines and the thin chromed edge make it even more suitable for environments where nothing is left to chance High Power Even in the most thermally demanding situations, Falko is able to deliver all the power needed to guarantee comfort Characteristics Heating, cooling and dehumidifying environments. Emitting power with high efficiency at high as well as low flow temperatures (excellent for heat pump systems). Combine with both traditional boilers, as well as condensing boilers, solar systems and heat pumps Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : T FALKO HI-WALL 350 HW Code : THM03A Performance: Cooling Power: 1730 W Heating power: 2198 W Air Flow : 340 m 3 /h Water Flow : 5 ~ 6.3 l/min Sound Pressure Level : 36 ~ 42 dB(A) Characteristics: Power supply (V,Hz, Ø) : 220~240/50/1 Electric Consumption : 27 W Maximum Current : 0.15A Maximum pressure : 1.6MPa Installation Data: Pipe diameter : 12.70 mm RC (1/2") Dimensions and weight: Internal Unit Dimensions (LxHxP): 850x300x198 mm Empty weight: 11.5 kg IdealClima hydronic terminals FALKO Comfosplit Hydronic with Hydrosilence Technology. Silent and Advanced Solutions Falko HW is the hydronic terminal which contains, in compact dimensions and captivating aesthetics, ideal technologies for obtaining thermal and acoustic comfort in residential environments. In fact, Falko HW is distinguished by a high-performance heat exchange battery and a fan unit with a three-phase permanent magnet brushless motor controlled with current reconstructed according to a sine wave (the motor is thus called the "ECM" type): comfort and efficiency Elegant and Modern Design The Falko HW design, characterized by a white ABS front panel with elegant chromed details, is designed to integrate into any type of environment. The integrated air outlet is equipped with a motorized deflector. The front panel is complete with a display showing the operating status and the temperature. Supplied as standard, the infrared remote control allows control of the terminal and the setting of "night reduction". The tangential fan is low noise The effectiveness of hydronic rationality Falko HW represents the new generation of fan coils designed with the aim of offering performance and design at the top of its category. Falko HW also means innovation in terms of design, to guarantee absolutely excellent sound performance with the advantage of an exclusive design that goes well with both residential and commercial use. The design covering cabinet has a white color, with front panel, sides, upper grille and side doors made of stabilized ABS Hot and cold only when needed Falko HW guarantees, with its efficiency and quick response, the living comfort standards necessary for modern life, based on a discontinuous presence in homes. With a single appliance, both heating and cooling needs can be satisfied, especially in reversible heat pump systems Falko HW ensures higher quality of the air that is introduced into the environment, well filtered by the standard fine-mesh filter: in fact, it guarantees constant ventilation, which allows for greater cleaning of the air and considerable hygiene in the environments Easy to Install Falko HW can be installed easily, quickly and in any condition. In fact, it matches perfectly with the ordinary gas split predisposition boxes (H.int>10cm). The convenient sheet metal fixing plate also acts as a template for quick installation. The solid hinge that is obtained facilitates connection and allows easy maintenance (e.g. hydraulic system air vent) Semi-transparent display Elegant transparent display of the latest generation, does not interrupt the product lines Infrared receiver Managed with the standard remote control, with ease of installation and operation Elegant Finishes Refined details such as the soft lines and the thin chromed edge make it even more suitable for environments where nothing is left to chance High Power Even in the most thermally demanding situations, Falko is able to deliver all the power needed to guarantee comfort Characteristics Heating, cooling and dehumidifying environments. Emitting power with high efficiency at high as well as low flow temperatures (excellent for heat pump systems). Combine with both traditional boilers, as well as condensing boilers, solar systems and heat pumps Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : IKARO HI-WALL 750 HW Code : THE07D Performance: Cooling Power: 3330 W Heating power: 4229 W Air Flow : 730 m 3 /h Water Flow : 9.67 ~ 12.1 l/min Sound Pressure Level : 37 ~ 42 dB(A) Characteristics: Power supply (V,Hz, Ø) : 220~240/50/1 Electric Consumption : 42 W Maximum Current : 0.22A Maximum pressure : 1.6MPa Installation data: Pipe diameter : 12.70 mm RC (1/2") Dimensions and weight: Internal Unit Dimensions (LxHxP): 850x300x198 mm Empty weight : 13 Kg IdealClima IKARO Hydronic Comfosplit Hydronic Terminals with Hydrosilence Technology. Silent and Advanced Solutions Ikaro is the wall-mounted hydronic terminal equipped with the exclusive HydroSilence technology, for unparalleled acoustic and thermal comfort. Specifically designed for residential applications, Ikaro encloses the best PID thermal and electronic technology in a compact and elegant form. Ideal in heat pump systems, and in renewable systems, including solar ones. Quick and effective, it heats, cools and dehumidifies in complete silence The Value of Silence It can deliver the ideal thermal power with unsurpassed silence thanks to the HydroSilence technology. As the desired temperature approaches, the electronic control reduces sound emission and air flows to imperceptible levels, maintaining ideal efficiency in both heating and cooling. Heats, cools and dehumidifies With 5 powers available from 1.1 to 3.3 kW in cooling and from 1.3 to 4.2 kW in heating, Ikaro is the complete solution for hydronic air conditioning, advantageous in systems with modern reversible heat pumps. The dehumidifying effect adds well-being to the rooms in summer. Ikaro has 5 sizes of silence With 5 models available, the choice of Ikaro can be made with extreme flexibility. Even important thermal loads can be satisfied with silence. For example, the 2 KW power Ikaro HW 350 has a noise level of 18 dB at medium speed, the 1.3 KW power Ikaro HW 180 is distinguished by a noise level of only 11 dB Compact, Elegant and Universal Ikaro's design is developed to find a place in the most elegant residential environments: with particular attention also to compactness (less than just 90cm wide). Furthermore, Ikaro can be universally installed with common predisposition boxes for gas splits (h.int>10cm). The convenient fixing plate, which facilitates installation and maintenance thanks to the "tilting hinge" joint, remains completely invisible The modern concept of comfort in domestic environments extends beyond climatic aspects to also include acoustics Hydro Silence technology It is the result of an innovation process aimed at making the consolidated efficiency of hydronic air conditioning integrated with the modern concept of not only climatic comfort, but especially acoustic comfort, indispensable in domestic environments. HydroSilence controls, modulates and actuates in unison the tangential fan unit, the high efficiency coil, the cross-flow technology and the refined electronics with PID algorithms for a unique combination of silence and performance Versatility of Control Each Ikaro can be managed in complete autonomy thanks to the practical infrared remote control supplied as standard, and to the captivating transparent LCD display which shows the temperature at all times. For an even more articulated control, for example within home automation systems, Ikaro is equipped with Modbus connectivity as standard. Ikaro finds its ideal insertion in Integra Benessere, the simple and advanced TermoDomotica by Ideal Clima which allows the control of all the system devices to govern domestic comfort to optimize efficiency and reduce consumption. From the Integra Touch touch screen panel it is possible to control, from a single point, all the functions of the house: air conditioning, hydronic or radiant, controlled ventilation, dehumidification and air quality. The pressure of a finger is enough to operate several devices at the same time or to set the temperature in every room of the house. With a simple and intuitive interface, integrated into the environment and thanks to the capacitive touch screen interaction with "gestures" habitual with the diffusion of tablets and smartphones. Characteristics Hydrosilence technology for unparalleled acoustic comfort. Cross-flow tangential fan. Inverter motors with modulating technology and PID adaptive algorithm . Universal wall-mountability, even with the common predisposition boxes for gas splits (internal height >10cm). Wide range of accessories, such as the 2 and 3-way kits that can be installed on the machine Numerous control options , from the standard remote control to Modbus connectivity and Integra Benessere Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : IKARO HI-WALL 180 HW Code : THE01D Performance: Cooling Power: 1112W Heating power: 1308 W Air Flow : 180 m 3 /h Water Flow : 3.17 ~ 3.7 l/min Sound Pressure Level : 11 ~ 13 dB(A) Characteristics: Power supply (V,Hz, Ø) : 220~240/50/1 Power Consumption: 12.6W Maximum Current : 0.14A Maximum pressure : 1.6MPa Installation data: Pipe diameter : 12.70 mm RC (1/2") Dimensions and weight: Internal Unit Dimensions (LxHxP): 850x300x198 mm Empty weight : 13 Kg IdealClima IKARO Hydronic Comfosplit Hydronic Terminals with Hydrosilence Technology. Silent and Advanced Solutions Ikaro is the wall-mounted hydronic terminal equipped with the exclusive HydroSilence technology, for unparalleled acoustic and thermal comfort. Specifically designed for residential applications, Ikaro encloses the best PID thermal and electronic technology in a compact and elegant form. Ideal in heat pump systems, and in renewable systems, including solar ones. Quick and effective, it heats, cools and dehumidifies in complete silence The Value of Silence It can deliver the ideal thermal power with unsurpassed silence thanks to the HydroSilence technology. As the desired temperature approaches, the electronic control reduces sound emission and air flows to imperceptible levels, maintaining ideal efficiency in both heating and cooling. Heats, cools and dehumidifies With 5 powers available from 1.1 to 3.3 kW in cooling and from 1.3 to 4.2 kW in heating, Ikaro is the complete solution for hydronic air conditioning, advantageous in systems with modern reversible heat pumps. The dehumidifying effect adds well-being to the rooms in summer. Ikaro has 5 sizes of silence With 5 models available, the choice of Ikaro can be made with extreme flexibility. Even important thermal loads can be satisfied with silence. For example, the 2 KW power Ikaro HW 350 has a noise level of 18 dB at medium speed, the 1.3 KW power Ikaro HW 180 is distinguished by a noise level of only 11 dB Compact, Elegant and Universal Ikaro's design is developed to find a place in the most elegant residential environments: with particular attention also to compactness (less than just 90cm wide). Furthermore, Ikaro can be universally installed with common predisposition boxes for gas splits (h.int>10cm). The convenient fixing plate, which facilitates installation and maintenance thanks to the "tilting hinge" joint, remains completely invisible The modern concept of comfort in domestic environments extends beyond climatic aspects to also include acoustics Hydro Silence technology It is the result of an innovation process aimed at making the consolidated efficiency of hydronic air conditioning integrated with the modern concept of not only climatic comfort, but especially acoustic comfort, indispensable in domestic environments. HydroSilence controls, modulates and actuates in unison the tangential fan unit, the high efficiency coil, the cross-flow technology and the refined electronics with PID algorithms for a unique combination of silence and performance Versatility of Control Each Ikaro can be managed in complete autonomy thanks to the practical infrared remote control supplied as standard, and to the captivating transparent LCD display which shows the temperature at all times. For an even more articulated control, for example within home automation systems, Ikaro is equipped with Modbus connectivity as standard. Ikaro finds its ideal insertion in Integra Benessere, the simple and advanced TermoDomotica by Ideal Clima which allows the control of all the system devices to govern domestic comfort to optimize efficiency and reduce consumption. From the Integra Touch touch screen panel it is possible to control, from a single point, all the functions of the house: air conditioning, hydronic or radiant, controlled ventilation, dehumidification and air quality. The pressure of a finger is enough to operate several devices at the same time or to set the temperature in every room of the house. With a simple and intuitive interface, integrated into the environment and thanks to the capacitive touch screen interaction with "gestures" habitual with the diffusion of tablets and smartphones. Characteristics Hydrosilence technology for unparalleled acoustic comfort. Cross-flow tangential fan. Inverter motors with modulating technology and PID adaptive algorithm . Universal wall-mountability, even with the common predisposition boxes for gas splits (internal height >10cm). Wide range of accessories, such as the 2 and 3-way kits that can be installed on the machine Numerous control options , from the standard remote control to Modbus connectivity and Integra Benessere Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : T FALKO HI-WALL 1000 HW Code : THM10A Performance: Cooling Power: 5100 W Heating power: 6478 W Air Flow : 1020 m 3 /h Water Flow : 14.9 ~ 18.5 l/min Sound Pressure Level : 40 ~ 49 dB(A) Characteristics: Power supply (V,Hz, Ø) : 220~240/50/1 Electric Consumption : 65 W Maximum Current : 0.36A Maximum pressure : 1.6MPa Installation data: Pipe diameter : 12.70 mm RC (1/2") Dimensions and weight: Internal Unit Dimensions (LxHxP): 970x300x198 mm Empty weight: 17 Kg IdealClima hydronic terminals FALKO Comfosplit Hydronic with Hydrosilence Technology. Silent and Advanced Solutions Falko HW is the hydronic terminal which, in compact dimensions and captivating aesthetics, contains technologies that are ideal for obtaining thermal and acoustic comfort in residential environments. In fact, Falko HW is distinguished by a high-performance heat exchange battery and a fan unit with a three-phase permanent magnet brushless motor controlled with current reconstructed according to a sine wave (the motor is thus called the "ECM" type): comfort and efficiency Elegant and Modern Design The Falko HW design, characterized by a white ABS front panel with elegant chromed details, is designed to integrate into any type of environment. The integrated air outlet is equipped with a motorized deflector. The front panel is complete with a display showing the operating status and the temperature. Supplied as standard, the infrared remote control allows control of the terminal and the setting of "night reduction". The tangential fan is low noise The effectiveness of hydronic rationality Falko HW represents the new generation of fan coils designed with the aim of offering performance and design at the top of its category. Falko HW also means innovation in terms of design, to guarantee absolutely excellent sound performance with the advantage of an exclusive design that goes well with both residential and commercial use. The design covering cabinet has a white color, with front panel, sides, upper grille and side doors made of stabilized ABS Hot and cold only when needed Falko HW guarantees, with its efficiency and quick response, the living comfort standards necessary for modern life, based on a discontinuous presence in homes. With a single appliance, both heating and cooling needs can be satisfied, especially in reversible heat pump systems Falko HW ensures higher quality of the air that is introduced into the environment, well filtered by the standard fine-mesh filter: in fact, it guarantees constant ventilation, which allows for greater cleaning of the air and considerable hygiene in the environments Easy to Install Falko HW can be installed easily, quickly and in any condition. In fact, it matches perfectly with the ordinary gas split predisposition boxes (H.int>10cm). The convenient sheet metal fixing plate also acts as a template for quick installation. The solid hinge that is obtained facilitates connection and allows easy maintenance (e.g. hydraulic system air vent) Semi-transparent display Elegant transparent display of the latest generation, does not interrupt the product lines Infrared receiver Managed with the standard remote control, with ease of installation and operation Elegant Finishes Refined details such as the soft lines and the thin chromed edge make it even more suitable for environments where nothing is left to chance High Power Even in the most thermally demanding situations, Falko is able to deliver all the power needed to guarantee comfort Characteristics Heating, cooling and dehumidifying environments. Emitting power with high efficiency at high as well as low flow temperatures (excellent for heat pump systems). Combine with both traditional boilers, as well as condensing boilers, solar systems and heat pumps Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : T FALKO HI-WALL 850 HW Code : THM08 Performance: Cooling Power: 4280 W Heating power: 5437 W Air Flow : 850 m 3 /h Water Flow : 12.5 ~ 15.5 l/min Sound Pressure Level : 40 ~ 47 dB(A) Characteristics: Power supply (V,Hz, Ø) : 220~240/50/1 Electric Consumption : 52 W Maximum Current : 0.29A Maximum pressure : 1.6MPa Installation Data: Pipe diameter : 12.70 mm RC (1/2") Dimensions and weight: Internal Unit Dimensions (LxHxP): 970x300x198 mm Empty weight: 16 Kg IdealClima hydronic terminals FALKO Comfosplit Hydronic with Hydrosilence Technology. Silent and Advanced Solutions Falko HW is the hydronic terminal which contains, in compact dimensions and captivating aesthetics, ideal technologies for obtaining thermal and acoustic comfort in residential environments. In fact, Falko HW is distinguished by a high-performance heat exchange battery and a fan unit with a three-phase permanent magnet brushless motor controlled with current reconstructed according to a sine wave (the motor is thus called the "ECM" type): comfort and efficiency Elegant and Modern Design The Falko HW design, characterized by a white ABS front panel with elegant chromed details, is designed to integrate into any type of environment. The integrated air outlet is equipped with a motorized deflector. The front panel is complete with a display showing the operating status and the temperature. Supplied as standard, the infrared remote control allows control of the terminal and the setting of "night reduction". The tangential fan is low noise The effectiveness of hydronic rationality Falko HW represents the new generation of fan coils designed with the aim of offering performance and design at the top of its category. Falko HW also means innovation in terms of design, to guarantee absolutely excellent sound performance with the advantage of an exclusive design that goes well with both residential and commercial use. The design covering cabinet has a white color, with front panel, sides, upper grille and side doors made of stabilized ABS Hot and cold only when needed Falko HW guarantees, with its efficiency and quick response, the living comfort standards necessary for modern life, based on a discontinuous presence in homes. With a single appliance, both heating and cooling needs can be satisfied, especially in reversible heat pump systems Falko HW ensures higher quality of the air that is introduced into the environment, well filtered by the standard fine-mesh filter: in fact, it guarantees constant ventilation, which allows for greater cleaning of the air and considerable hygiene in the environments Easy to Install Falko HW can be installed easily, quickly and in any condition. In fact, it matches perfectly with the ordinary gas split predisposition boxes (H.int>10cm). The convenient sheet metal fixing plate also acts as a template for quick installation. The solid hinge that is obtained facilitates connection and allows easy maintenance (e.g. hydraulic system air vent) Semi-transparent display Elegant transparent display of the latest generation, does not interrupt the product lines Infrared receiver Managed with the standard remote control, with ease of installation and operation Elegant Finishes Refined details such as the soft lines and the thin chromed edge make it even more suitable for environments where nothing is left to chance High Power Even in the most thermally demanding situations, Falko is able to deliver all the power needed to guarantee comfort Characteristics Heating, cooling and dehumidifying environments. Emitting power with high efficiency at high as well as low flow temperatures (excellent for heat pump systems). Combine with both traditional boilers, as well as condensing boilers, solar systems and heat pumps Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : IKARO HI-WALL 250 HW Code : THE02D Performance: Cooling Power: 1303 W Heating power: 1629 W Air Flow : 250 m 3 /h Water Flow : 3.75 ~ 4.7 l/min Sound Pressure Level : 12 ~ 16 dB(A) Characteristics: Power supply (V,Hz, Ø) : 220~240/50/1 Power Consumption: 15W Maximum Current : 0.15A Maximum pressure : 1.6MPa Installation Data: Pipe diameter : 12.70 mm RC (1/2") Dimensions and weight: Internal Unit Dimensions (LxHxP): 850x300x198 mm Empty weight : 13 Kg IdealClima IKARO Hydronic Comfosplit Hydronic Terminals with Hydrosilence Technology. Silent and Advanced Solutions Ikaro is the wall-mounted hydronic terminal equipped with the exclusive HydroSilence technology, for unparalleled acoustic and thermal comfort. Specifically designed for residential applications, Ikaro encloses the best PID thermal and electronic technology in a compact and elegant form. Ideal in heat pump systems, and in renewable systems, including solar ones. Quick and effective, it heats, cools and dehumidifies in complete silence The Value of Silence It can deliver the ideal thermal power with unsurpassed silence thanks to the HydroSilence technology. As the desired temperature approaches, the electronic control reduces sound emission and air flows to imperceptible levels, maintaining ideal efficiency in both heating and cooling. Heats, cools and dehumidifies With 5 powers available from 1.1 to 3.3 kW in cooling and from 1.3 to 4.2 kW in heating, Ikaro is the complete solution for hydronic air conditioning, advantageous in systems with modern reversible heat pumps. The dehumidifying effect adds well-being to the rooms in summer. Ikaro has 5 sizes of silence With 5 models available, the choice of Ikaro can be made with extreme flexibility. Even important thermal loads can be satisfied with silence. For example, the 2 KW power Ikaro HW 350 has a noise level of 18 dB at medium speed, the 1.3 KW power Ikaro HW 180 is distinguished by a noise level of only 11 dB Compact, Elegant and Universal Ikaro's design is developed to find a place in the most elegant residential environments: with particular attention also to compactness (less than just 90cm wide). Furthermore, Ikaro can be universally installed with common predisposition boxes for gas splits (h.int>10cm). The convenient fixing plate, which facilitates installation and maintenance thanks to the "tilting hinge" joint, remains completely invisible The modern concept of comfort in domestic environments extends beyond climatic aspects to also include acoustics Hydro Silence technology It is the result of an innovation process aimed at making the consolidated efficiency of hydronic air conditioning integrated with the modern concept of not only climatic comfort, but especially acoustic comfort, indispensable in domestic environments. HydroSilence controls, modulates and actuates in unison the tangential fan unit, the high efficiency coil, the cross-flow technology and the refined electronics with PID algorithms for a unique combination of silence and performance Versatility of Control Each Ikaro can be managed in complete autonomy thanks to the practical infrared remote control supplied as standard, and to the captivating transparent LCD display which shows the temperature at all times. For an even more articulated control, for example within home automation systems, Ikaro is equipped with Modbus connectivity as standard. Ikaro finds its ideal insertion in Integra Benessere, the simple and advanced TermoDomotica by Ideal Clima which allows the control of all the system devices to govern domestic comfort to optimize efficiency and reduce consumption. From the Integra Touch touch screen panel it is possible to control, from a single point, all the functions of the house: air conditioning, hydronic or radiant, controlled ventilation, dehumidification and air quality. The pressure of a finger is enough to operate several devices at the same time or to set the temperature in every room of the house. With a simple and intuitive interface, integrated into the environment and thanks to the capacitive touch screen interaction with "gestures" habitual with the diffusion of tablets and smartphones. Characteristics Hydrosilence technology for unparalleled acoustic comfort. Cross-flow tangential fan. Inverter motors with modulating technology and PID adaptive algorithm . Universal wall-mountability, even with the common predisposition boxes for gas splits (internal height >10cm). Wide range of accessories, such as the 2 and 3-way kits that can be installed on the machine Numerous control options , from the standard remote control to Modbus connectivity and Integra Benessere Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : IKARO HI-WALL 500 HW Code : THE05D Performance: Cooling Power: 2570 W Heating power: 3260 W Air Flow : 520 m 3 /h Water Flow : 7.92 ~ 9.3 l/min Sound Pressure Level : 23 ~ 27 dB(A) Characteristics: Power supply (V,Hz, Ø) : 220~240/50/1 Electric Consumption : 28 W Maximum Current : 0.2A Maximum pressure : 1.6MPa Installation data: Pipe diameter : 12.70 mm RC (1/2") Dimensions and weight: Internal Unit Dimensions (LxHxP): 850x300x198 mm Empty weight : 13 Kg IdealClima IKARO Hydronic Comfosplit Hydronic Terminals with Hydrosilence Technology. Silent and Advanced Solutions Ikaro is the wall-mounted hydronic terminal equipped with the exclusive HydroSilence technology, for unparalleled acoustic and thermal comfort. Specifically designed for residential applications, Ikaro encloses the best PID thermal and electronic technology in a compact and elegant form. Ideal in heat pump systems, and in renewable systems, including solar ones. Quick and effective, it heats, cools and dehumidifies in complete silence The Value of Silence It can deliver the ideal thermal power with unsurpassed silence thanks to the HydroSilence technology. As the desired temperature approaches, the electronic control reduces sound emission and air flows to imperceptible levels, maintaining ideal efficiency in both heating and cooling. Heats, cools and dehumidifies With 5 powers available from 1.1 to 3.3 kW in cooling and from 1.3 to 4.2 kW in heating, Ikaro is the complete solution for hydronic air conditioning, advantageous in systems with modern reversible heat pumps. The dehumidifying effect adds well-being to the rooms in summer. Ikaro has 5 sizes of silence With 5 models available, the choice of Ikaro can be made with extreme flexibility. Even important thermal loads can be satisfied with silence. For example, the 2 KW power Ikaro HW 350 has a noise level of 18 dB at medium speed, the 1.3 KW power Ikaro HW 180 is distinguished by a noise level of only 11 dB Compact, Elegant and Universal Ikaro's design is developed to find a place in the most elegant residential environments: with particular attention also to compactness (less than just 90cm wide). Furthermore, Ikaro can be universally installed with common predisposition boxes for gas splits (h.int>10cm). The convenient fixing plate, which facilitates installation and maintenance thanks to the "tilting hinge" joint, remains completely invisible The modern concept of comfort in domestic environments extends beyond climatic aspects to also include acoustics Hydro Silence technology It is the result of an innovation process aimed at making the consolidated efficiency of hydronic air conditioning integrated with the modern concept of not only climatic comfort, but especially acoustic comfort, indispensable in domestic environments. HydroSilence controls, modulates and actuates in unison the tangential fan unit, the high efficiency coil, the cross-flow technology and the refined electronics with PID algorithms for a unique combination of silence and performance Versatility of Control Each Ikaro can be managed in complete autonomy thanks to the practical infrared remote control supplied as standard, and to the captivating transparent LCD display which shows the temperature at all times. For an even more articulated control, for example within home automation systems, Ikaro is equipped with Modbus connectivity as standard. Ikaro finds its ideal insertion in Integra Benessere, the simple and advanced TermoDomotica by Ideal Clima which allows the control of all the system devices to govern domestic comfort to optimize efficiency and reduce consumption. From the Integra Touch touch screen panel it is possible to control, from a single point, all the functions of the house: air conditioning, hydronic or radiant, controlled ventilation, dehumidification and air quality. The pressure of a finger is enough to operate several devices at the same time or to set the temperature in every room of the house. With a simple and intuitive interface, integrated into the environment and thanks to the capacitive touch screen interaction with "gestures" habitual with the diffusion of tablets and smartphones. Characteristics Hydrosilence technology for unparalleled acoustic comfort. Cross-flow tangential fan. Inverter motors with modulating technology and PID adaptive algorithm . Universal wall-mountability, even with the common predisposition boxes for gas splits (internal height >10cm). Wide range of accessories, such as the 2 and 3-way kits that can be installed on the machine Numerous control options , from the standard remote control to Modbus connectivity and Integra Benessere Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : IKARO HI-WALL 350 HW Code : THE03D Performance: Cooling Power: 1689 W Heating power: 2069 W Air Flow : 340 m 3 /h Water Flow : 4.83 ~ 5.9 l/min Sound Pressure Level : 16 ~ 21 dB(A) Characteristics: Power supply (V,Hz, Ø) : 220~240/50/1 Power Consumption: 18.3W Maximum Current : 0.16A Maximum pressure : 1.6MPa Installation data: Pipe diameter : 12.70 mm RC (1/2") Dimensions and weight: Internal Unit Dimensions (LxHxP): 850x300x198 mm Empty weight : 13 Kg IdealClima IKARO Hydronic Comfosplit Hydronic Terminals with Hydrosilence Technology. Silent and Advanced Solutions Ikaro is the wall-mounted hydronic terminal equipped with the exclusive HydroSilence technology, for unparalleled acoustic and thermal comfort. Specifically designed for residential applications, Ikaro encloses the best PID thermal and electronic technology in a compact and elegant form. Ideal in heat pump systems, and in renewable systems, including solar ones. Quick and effective, it heats, cools and dehumidifies in complete silence The Value of Silence It can deliver the ideal thermal power with unsurpassed silence thanks to the HydroSilence technology. As the desired temperature approaches, the electronic control reduces sound emission and air flows to imperceptible levels, maintaining ideal efficiency in both heating and cooling. Heats, cools and dehumidifies With 5 powers available from 1.1 to 3.3 kW in cooling and from 1.3 to 4.2 kW in heating, Ikaro is the complete solution for hydronic air conditioning, advantageous in systems with modern reversible heat pumps. The dehumidifying effect adds well-being to the rooms in summer. Ikaro has 5 sizes of silence With 5 models available, the choice of Ikaro can be made with extreme flexibility. Even important thermal loads can be satisfied with silence. For example, the 2 KW power Ikaro HW 350 has a noise level of 18 dB at medium speed, the 1.3 KW power Ikaro HW 180 is distinguished by a noise level of only 11 dB Compact, Elegant and Universal Ikaro's design is developed to find a place in the most elegant residential environments: with particular attention also to compactness (less than just 90cm wide). Furthermore, Ikaro can be universally installed with common predisposition boxes for gas splits (h.int>10cm). The convenient fixing plate, which facilitates installation and maintenance thanks to the "tilting hinge" joint, remains completely invisible The modern concept of comfort in domestic environments extends beyond climatic aspects to also include acoustics Hydro Silence technology It is the result of an innovation process aimed at making the consolidated efficiency of hydronic air conditioning integrated with the modern concept of not only climatic comfort, but especially acoustic comfort, indispensable in domestic environments. HydroSilence controls, modulates and actuates in unison the tangential fan unit, the high efficiency coil, the cross-flow technology and the refined electronics with PID algorithms for a unique combination of silence and performance Versatility of Control Each Ikaro can be managed in complete autonomy thanks to the practical infrared remote control supplied as standard, and to the captivating transparent LCD display which shows the temperature at all times. For an even more articulated control, for example within home automation systems, Ikaro is equipped with Modbus connectivity as standard. Ikaro finds its ideal insertion in Integra Benessere, the simple and advanced TermoDomotica by Ideal Clima which allows the control of all the system devices to govern domestic comfort to optimize efficiency and reduce consumption. From the Integra Touch touch screen panel it is possible to control, from a single point, all the functions of the house: air conditioning, hydronic or radiant, controlled ventilation, dehumidification and air quality. The pressure of a finger is enough to operate several devices at the same time or to set the temperature in every room of the house. With a simple and intuitive interface, integrated into the environment and thanks to the capacitive touch screen interaction with "gestures" habitual with the diffusion of tablets and smartphones. Characteristics Hydrosilence technology for unparalleled acoustic comfort. Cross-flow tangential fan. Inverter motors with modulating technology and PID adaptive algorithm . Universal wall-mountability, even with the common predisposition boxes for gas splits (internal height >10cm). Wide range of accessories, such as the 2 and 3-way kits that can be installed on the machine Numerous control options , from the standard remote control to Modbus connectivity and Integra Benessere Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less