ATTENZIONE  IL PRODOTTO È NUOVO E FUNZIONANTE, MA PRESENTA AMMACCATURE SUI PANNELLI LATERALI E L'IMBALLO È USURATO (PER MAGGIORI INFORMAZIONI SUI DANNEGGIAMENTI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE). Caldaia MURALE Riello START 30 Kis LOW NOx a condensazione cod. 20187407 completa di kit scarico fumi Metano Classe di efficienza stagionale del riscaldamento d'ambiente A Classe di efficienza energetica di riscaldamento dell'acqua- A Potenza nominale P nominale kW 19 Efficienza energetica stagionale del riscaldamento d'ambiente % 93 RISCALDAMENTO Portata termica nominale :kW 20,00 Potenza termica nominale (80÷60 °C) kW 24,38 Potenza termica nominale (50÷30 °C) kW 26,78 Portata termica ridotta : kW 3,95 Potenza termica ridotta (80÷60 °C) kW 3,79 Potenza termica ridotta (50÷30 °C) kW 4,09  SANITARIO Portata termica nominale kW 30,00 Potenza termica nominale kW 30,00 Portata termica ridotta kW 3,95 Potenza termica ridotta (*) kW 3,95 RENDIMENTI Rendimento utile Pn max-Pn min (80°-60°) % 97,5 - 96,0 Rendimento utile Pn max-Pn min (50°-30°) % 107,1 - 103,6 Rendimento utile 30 % (ritorno 30°C) % 108,8 Rendimento a P media Range Rated (80°-60°) % - 97,3 Rendimento a P media Range Rated 30% (30° ritorno) % - 109,0 Rendimento di combustione % 97,7 Perdite al camino con bruciatore acceso (Pn max) % 2,3 Perdite al camino con bruciatore spento % 0,08 Perdite al mantello con bruciatore acceso (Pn max) % 0,2 SCARICO FUMI Classe Nox - UNI EN 15502: 6 Prevalenza residua tubi concentrici 0,85 m ø 60-100 mm Pa : 60 Prevalenza residua tubi separati 0,5 m ø 80 mm Pa : 190 Prevalenza residua caldaia senza tubi e senza flangia Pa 196 CARATTERISTICHE ELETTRICHE Potenza elettrica (Pel max risc.- Pel max san.) W 85 - 102 Potenza elettrica circolatore (1000 l/h) W 42 Tensione di alimentazione V - Hz 230-50 Grado di protezione IP X5D ESERCIZIO RISCALDAMENTO Pressione massima bar 3 Pressione minima per il funzionamento standard bar 0,25 Temperatura massima °C 90 Pompa: prevalenza max disponibile all'impianto mbar 408 alla portata di l/h 1000 Vaso di espansione a membrana l 8  Precarica vaso di espansione bar 1 ESERCIZIO SANITARIO - VERSIONE ISTANTANEA Pressione massima bar - 8 Pressione minima bar - 0,5 Quantità di acqua calda con ?t 25°C l/min - 17,2 con ?deltat 30°C l/min 14,3 con deltat 35°C l/min - 12,3 Portata minima acqua sanitaria l/min - 2 Campo di selezione della temperatura H2O san. °C - 37/60 Regolatore di flusso l/min – 12 Nuova Start START è la nuova proposta, completamente rinnovata dal punto di vista tecnologico e funzionale, di caldaie a condenazione Riello per utenze domestiche di piccole e medie dimensioni. START è disponibile in 3 taglie 15, 25, 30 kW, in versioni combinate (KIS) e solo riscaldamento (IS). Una delle caratteristiche distintive della nuova START è l’innovativo pannello comandi digitale con tasti touch progettato con una particolare attenzione alla facilità di utilizzo. Scambiatore sanitario ad alta efficienza sviluppato da Riello HMI touchscreen moderna e intuitiva, con icone rappresentative e tasti capacitivi con suono acustico “buzzer” Design moderno e lineare con copertura raccordi inferiori sotto-caldaia disponibile come accessorio per un'ottima integrazione estetica Funzioni elettroniche specifiche sanitarie: ritardo sanitario, funzione anti-pendolazione e ventilatore smart Gruppo idraulico con sequenza a standard DIN Circolatore basso consumo (IEE?0,20) 7 m ad alta prevalenza disponibile come accessorio Facilità di installazione, integrazione anche in spazi contenuti e sostituzione grazie all'ampia ampia scelta di accessori disponibili come optional Rapporto di modulazione 1:8 Facile manutenzione e pulizia della camera di combustione grazie all'accesso frontale allo scambiatore – Efficienza stagionale 93% Vaso espansione laterale da 8 litri  Flangia fumi di serie con fumisteria dedicata Termoregolazione di serie in abbinamento alla sonda esterna, disponibile come accessorio Possibilità di installazione anche ad incasso (modello 25 KIS e 30 KIS) ed all'esterno in luoghi parzialmente protetti (IPX5D) Traversa di montaggio già integrata in caldaia e cavo di alimentazione elettrica a corredo Funzionamento a metano di serie con possibilità di trasformazione a GPL (G31) e aria propanata tramite accessori. Tale modifica è a cura dell'istallatore o del servizio tecnico di assistenza. Grado di protezione elettrica IPX5D. Garanzia Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE MA PRESENTA L'IMBALLO DANNEGGIATO. Caldaia Murale Riello START 30 Kis LOW NOx a condensazione cod. 20187407 completa di kit scarico fumi Metano Classe di efficienza stagionale del riscaldamento d'ambiente A Classe di efficienza energetica di riscaldamento dell'acqua- A Potenza nominale P nominale kW 19 Efficienza energetica stagionale del riscaldamento d'ambiente % 93 RISCALDAMENTO Portata termica nominale :kW 20,00 Potenza termica nominale (80÷60 °C) kW 24,38 Potenza termica nominale (50÷30 °C) kW 26,78 Portata termica ridotta : kW 3,95 Potenza termica ridotta (80÷60 °C) kW 3,79 Potenza termica ridotta (50÷30 °C) kW 4,09  SANITARIO Portata termica nominale kW 30,00 Potenza termica nominale kW 30,00 Portata termica ridotta kW 3,95 Potenza termica ridotta (*) kW 3,95 RENDIMENTI Rendimento utile Pn max-Pn min (80°-60°) % 97,5 - 96,0 Rendimento utile Pn max-Pn min (50°-30°) % 107,1 - 103,6 Rendimento utile 30 % (ritorno 30°C) % 108,8 Rendimento a P media Range Rated (80°-60°) % - 97,3 Rendimento a P media Range Rated 30% (30° ritorno) % - 109,0 Rendimento di combustione % 97,7 Perdite al camino con bruciatore acceso (Pn max) % 2,3 Perdite al camino con bruciatore spento % 0,08 Perdite al mantello con bruciatore acceso (Pn max) % 0,2 SCARICO FUMI Classe Nox - UNI EN 15502: 6 Prevalenza residua tubi concentrici 0,85 m ø 60-100 mm Pa : 60 Prevalenza residua tubi separati 0,5 m ø 80 mm Pa : 190 Prevalenza residua caldaia senza tubi e senza flangia Pa 196 CARATTERISTICHE ELETTRICHE Potenza elettrica (Pel max risc.- Pel max san.) W 85 - 102 Potenza elettrica circolatore (1000 l/h) W 42 Tensione di alimentazione V - Hz 230-50 Grado di protezione IP X5D ESERCIZIO RISCALDAMENTO Pressione massima bar 3 Pressione minima per il funzionamento standard bar 0,25 Temperatura massima °C 90 Pompa: prevalenza max disponibile all'impianto mbar 408 alla portata di l/h 1000 Vaso di espansione a membrana l 8  Precarica vaso di espansione bar 1 ESERCIZIO SANITARIO - VERSIONE ISTANTANEA Pressione massima bar - 8 Pressione minima bar - 0,5 Quantità di acqua calda con ?t 25°C l/min - 17,2 con ?deltat 30°C l/min 14,3 con deltat 35°C l/min - 12,3 Portata minima acqua sanitaria l/min - 2 Campo di selezione della temperatura H2O san. °C - 37/60 Regolatore di flusso l/min – 12 Nuova Start START è la nuova proposta, completamente rinnovata dal punto di vista tecnologico e funzionale, di caldaie a condenazione Riello per utenze domestiche di piccole e medie dimensioni. START è disponibile in 3 taglie 15, 25, 30 kW, in versioni combinate (KIS) e solo riscaldamento (IS). Una delle caratteristiche distintive della nuova START è l’innovativo pannello comandi digitale con tasti touch progettato con una particolare attenzione alla facilità di utilizzo. Scambiatore sanitario ad alta efficienza sviluppato da Riello HMI touchscreen moderna e intuitiva, con icone rappresentative e tasti capacitivi con suono acustico “buzzer” Design moderno e lineare con copertura raccordi inferiori sotto-caldaia disponibile come accessorio per un'ottima integrazione estetica Funzioni elettroniche specifiche sanitarie: ritardo sanitario, funzione anti-pendolazione e ventilatore smart Gruppo idraulico con sequenza a standard DIN Circolatore basso consumo (IEE?0,20) 7 m ad alta prevalenza disponibile come accessorio Facilità di installazione, integrazione anche in spazi contenuti e sostituzione grazie all'ampia ampia scelta di accessori disponibili come optional Rapporto di modulazione 1:8 Facile manutenzione e pulizia della camera di combustione grazie all'accesso frontale allo scambiatore – Efficienza stagionale 93% Vaso espansione laterale da 8 litri  Flangia fumi di serie con fumisteria dedicata Termoregolazione di serie in abbinamento alla sonda esterna, disponibile come accessorio Possibilità di installazione anche ad incasso (modello 25 KIS e 30 KIS) ed all'esterno in luoghi parzialmente protetti (IPX5D) Traversa di montaggio già integrata in caldaia e cavo di alimentazione elettrica a corredo Funzionamento a metano di serie con possibilità di trasformazione a GPL (G31) e aria propanata tramite accessori. Tale modifica è a cura dell'istallatore o del servizio tecnico di assistenza. Grado di protezione elettrica IPX5D. Garanzia Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE MA PRESENTA L'IMBALLO DANNEGGIATO. Caldaia Murale Riello START 30 Kis LOW NOx a condensazione cod. 20187407 completa di kit scarico fumi Metano Classe di efficienza stagionale del riscaldamento d'ambiente A Classe di efficienza energetica di riscaldamento dell'acqua- A Potenza nominale P nominale kW 19 Efficienza energetica stagionale del riscaldamento d'ambiente % 93 RISCALDAMENTO Portata termica nominale :kW 20,00 Potenza termica nominale (80÷60 °C) kW 24,38 Potenza termica nominale (50÷30 °C) kW 26,78 Portata termica ridotta : kW 3,95 Potenza termica ridotta (80÷60 °C) kW 3,79 Potenza termica ridotta (50÷30 °C) kW 4,09  SANITARIO Portata termica nominale kW 30,00 Potenza termica nominale kW 30,00 Portata termica ridotta kW 3,95 Potenza termica ridotta (*) kW 3,95 RENDIMENTI Rendimento utile Pn max-Pn min (80°-60°) % 97,5 - 96,0 Rendimento utile Pn max-Pn min (50°-30°) % 107,1 - 103,6 Rendimento utile 30 % (ritorno 30°C) % 108,8 Rendimento a P media Range Rated (80°-60°) % - 97,3 Rendimento a P media Range Rated 30% (30° ritorno) % - 109,0 Rendimento di combustione % 97,7 Perdite al camino con bruciatore acceso (Pn max) % 2,3 Perdite al camino con bruciatore spento % 0,08 Perdite al mantello con bruciatore acceso (Pn max) % 0,2 SCARICO FUMI Classe Nox - UNI EN 15502: 6 Prevalenza residua tubi concentrici 0,85 m ø 60-100 mm Pa : 60 Prevalenza residua tubi separati 0,5 m ø 80 mm Pa : 190 Prevalenza residua caldaia senza tubi e senza flangia Pa 196 CARATTERISTICHE ELETTRICHE Potenza elettrica (Pel max risc.- Pel max san.) W 85 - 102 Potenza elettrica circolatore (1000 l/h) W 42 Tensione di alimentazione V - Hz 230-50 Grado di protezione IP X5D ESERCIZIO RISCALDAMENTO Pressione massima bar 3 Pressione minima per il funzionamento standard bar 0,25 Temperatura massima °C 90 Pompa: prevalenza max disponibile all'impianto mbar 408 alla portata di l/h 1000 Vaso di espansione a membrana l 8  Precarica vaso di espansione bar 1 ESERCIZIO SANITARIO - VERSIONE ISTANTANEA Pressione massima bar - 8 Pressione minima bar - 0,5 Quantità di acqua calda con ?t 25°C l/min - 17,2 con ?deltat 30°C l/min 14,3 con deltat 35°C l/min - 12,3 Portata minima acqua sanitaria l/min - 2 Campo di selezione della temperatura H2O san. °C - 37/60 Regolatore di flusso l/min – 12 Nuova Start START è la nuova proposta, completamente rinnovata dal punto di vista tecnologico e funzionale, di caldaie a condenazione Riello per utenze domestiche di piccole e medie dimensioni. START è disponibile in 3 taglie 15, 25, 30 kW, in versioni combinate (KIS) e solo riscaldamento (IS). Una delle caratteristiche distintive della nuova START è l’innovativo pannello comandi digitale con tasti touch progettato con una particolare attenzione alla facilità di utilizzo. Scambiatore sanitario ad alta efficienza sviluppato da Riello HMI touchscreen moderna e intuitiva, con icone rappresentative e tasti capacitivi con suono acustico “buzzer” Design moderno e lineare con copertura raccordi inferiori sotto-caldaia disponibile come accessorio per un'ottima integrazione estetica Funzioni elettroniche specifiche sanitarie: ritardo sanitario, funzione anti-pendolazione e ventilatore smart Gruppo idraulico con sequenza a standard DIN Circolatore basso consumo (IEE?0,20) 7 m ad alta prevalenza disponibile come accessorio Facilità di installazione, integrazione anche in spazi contenuti e sostituzione grazie all'ampia ampia scelta di accessori disponibili come optional Rapporto di modulazione 1:8 Facile manutenzione e pulizia della camera di combustione grazie all'accesso frontale allo scambiatore – Efficienza stagionale 93% Vaso espansione laterale da 8 litri  Flangia fumi di serie con fumisteria dedicata Termoregolazione di serie in abbinamento alla sonda esterna, disponibile come accessorio Possibilità di installazione anche ad incasso (modello 25 KIS e 30 KIS) ed all'esterno in luoghi parzialmente protetti (IPX5D) Traversa di montaggio già integrata in caldaia e cavo di alimentazione elettrica a corredo Funzionamento a metano di serie con possibilità di trasformazione a GPL (G31) e aria propanata tramite accessori. Tale modifica è a cura dell'istallatore o del servizio tecnico di assistenza. Grado di protezione elettrica IPX5D. Garanzia Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Condensing boiler Riello Residence Condens 25 KIS Gpl complete with flue kit cod. 20097541 Technical specifications Product code:20097541 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Firebox thermal power (heating): 25 kW Useful thermal power (sanitary): 25 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 105% Profit return 30% (47th return): 110% Sealed chamber, forced draught Quantity of hot water at ?t 25°C: 14.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 845 x 400 x 358 ; 39 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: LPG General characteristics RESIDENCE CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models Residence Condens is the Riello wall-mounted condensing boiler for medium-sized users. The new primary heat exchanger completely made of aluminum with front access to the combustion chamber ensures better efficiency and durability. It is available with powers from 20 to 32 kW. Characteristics: Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at the right temperature, reducing waiting times during withdrawal (instantaneous combined models only) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

RIELLO FAMILY CONDENS 2.5 KIS LPG CONDENSING BOILER COMPLETE WITH SMOKE KIT - NEW ErP 2015: Family Condens is a technologically advanced wall-mounted boiler that combines the best comfort, energy savings and respect for the environment. Technical features Product Code: 20102932 Energy label specifications according to European ErP directive Heating energy efficiency Class A Energy efficiency of sanitary equipment XL profile Class A Heating/sanitary operation features: Fireplace thermal power (heating) min-max: 2.8÷20.0 kW Useful thermal power (domestic hot water) min-max: 2.8÷25.0 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 107.2% Profitability 30% (47th return): 109.6% Airtight chamber, forced draft Amount of hot water at Δt 25°C: 14.3 l/min Minimum flow rate of sanitary water: 2 l/min Dimensions (hxwxd) 845 x 453 x 358 mm; 42 kg Electrical protection degree: IP X5D NOx class: 5 Power supply: LPG General Features FAMILY CONDENS Performance **** Low polluting emissions Condensation in aluminum, with premixed burner Combined instantaneous and storage heating models For indoor, outdoor and built-in installations Family Condens is a wall-mounted boiler that best combines comfort, energy saving and respect for the environment. The new primary heat exchanger made entirely of aluminum with frontal accessibility to the combustion chamber (models 2.5 and 3.0) guarantees better efficiency and durability. Family Condens is available with powers from 2.8 to 35 kW. Characteristics: Modulation ratio 1:10 (minimum power 2.8 kW) which allows the boiler to respond to all heat requests Modulating circulator, low consumption (IEE≤0.20) 3 Stars in health comfort according to EN 13203 Alarm remote control system that allows remote reporting of boiler block status Special Family functions: Wellness button, Memory button, Touch&Go function, Intelligent system filling Assembly template, hydraulic fittings and power cable included LPG conversion kit (G31) supplied with 3.5 models External probe as standard. ErP: Energy related Products The new European regulations for heat generators ErP is the acronym for “ Energy related Products ” (energy-related products) and is the abbreviation that identifies the European ErP Directive 2009/125/CE, defined by the EEC with the aim of reducing the energy consumption of products through eco-compatible design (“eco-design”). The scope of this European Directive is extremely broad as it has so far affected products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, from 26 September 2015 it will also apply to heating and domestic hot water production products. Also from the same date, other regulations that will implement the energy labeling of the same product families will become effective. The transitional period between the publication of the regulations and their activation throughout the European Community was necessary to allow the full reception of the contents by companies and market players. Energy labelling of heating and domestic hot water products The regulations issued require that all products intended for heating and/or the production of sanitary water, with a nominal thermal power lower than or equal to 70 kW, be placed on the market with an energy label that highlights their efficiency class. Note: the regulation requires the presence of the energy label for the release of the product from factories to the market. All products previously released, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Different energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of sanitary water from A to G. A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the efficiency level of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency data is reported for the average climate range.   In addition to product energy labels, European regulations have also provided for the creation of a system label in the case of a system in which several devices, components and controls operate.   This labeling, thanks to the combinations of data from the different elements used in the system, will allow the creation of systems capable of reaching efficiency levels even higher than those of individual generators. The European regulation requires that the system label must be made available by those who supply and/or operate the system (sellers-installers); however, this option is also granted to manufacturers. Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview RIELLO FAMILY CONDENS 3.0 KIS METHANE CONDENSING BOILER COMPLETE WITH FUME KIT + BUILT-IN UNIT - NEW ErP 2015: Family Condens is a technologically advanced wall-mounted built-in boiler that allows you to have the special Family functions in the concealed built-in unit. Technical specifications Product code:ÿ20102941 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitaryware energy efficiencyprofilXL Class A Characteristics of heating/sanitary exercises: Firebox thermal power (heating)ÿmin-max: 3.2ú25ÿkW Useful thermal power (sanitary) min-max: 3.2ú30ÿkW Energy efficiency(92/42/CEE)ÿ**** Efficiency at Pn* (50øC-30øC): 106.8% Profitability 30% (47ø return): 109.9% Sealed chamber, forced drafts Quantity of hot water at t 25°C: 17.2 l/min Minimum domestic water flow rate: 2ÿl/min Dimensions (hxwxd) mm 797 x 553 x 268ÿ; 42 kgs Built-in dimensions (hxlxp) mm 1223 x 654 x 281; 21kg Electrical protection degrees: IP X5D NOx class: 5 Power supply: METHANEÿ Complete with built-in unit code ÿ20082310 Features list FAMILY IN CONDENS Efficiency****ÿ Low polluting emissionsÿ Aluminum condenser, with premix burnerÿ Models for combined instantaneous and accumulation heating For built-in installations Family In Condens a built-in wall mounted boiler that allows you to have the special Family functions in the concealed built-in. The new primary heat exchanger completely made of aluminum with frontal accessibility to the combustion chamber guarantees better efficiency and duration. It is available with powers from 3.2 to 30 kW. Features:ÿ Modulation ratio 1:10 (minimum power 3.2 kW) which allows the boiler to respond to all heat requestsÿ Modulating circulator, low consumption(IEE0,20)ÿ 3 Stars in sanitary comfort according to EN 13203ÿ Family Remote Control, supplied as standard, allows management of all boiler functions directly from inside the homeÿ Antigelfine -15øCÿ Remote alarm system which allows remote signaling of the boiler lockout statusÿ Special Family functions: TastBenessere, TastMemory, Touch&Go function Smart Fillsÿ Standard external probe. ÿTheÿFAMILY Remote Control kitÿ (remote control panel) is the instrument that allows you to manage the boiler remotely. The panel controls the boiler, storage tank and room temperatures, monitors and supervises the operating regimes, activation times and signals any anomalies. The remote control panel can be configured as: Chronothermostatÿ (factory con guration): it will operate according to the standard heating program according to the personalized one. In this con guration the control panel tries to keep the room at two temperature levels (comfort and reduced), switching from one to the other at times established by the user. Thermostat: the heating is activated when the temperature detected by the room probe (contained in the control panel) is lower than the one set regardless of the memorized heating programme. ErP: Energy related Products ErP the acronym for Energy related Products? (products connected to the use of energy) and the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design (or eco-design?). The scope of action of this European Directive is extremely broad since up to now it has affected products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 they will also apply to heating products and the production of domestic hot water. Also from the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community is necessary to allow the full transposition of the contents by companies and market players. The regulations issued require that all products intended for heating and/for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an ÿenergy labelÿ that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the introduction of the product from the factories to the market. All the products previously introduced, for example present near distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product, to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as well as those on air conditioners, the efficiency data reported for the average climatic zone. In addition to product energy labels, European regulations have also provided for the creation of a "system label" in the case of building a plant in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will allow the creation of systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/operates the system (sellers-installers); but this faculty is also granted to builders. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Open Chamber Boiler Riello Residence 24 KI DGT N Technical features Maximum pressure 6 Minimum pressure 0.15 Quantity of hot water at ∆t 25°C 13.7 Domestic hot water temperature selection range (± 3°C) 37-60 Minimum domestic water flow rate 2 Rated power Pnominal 24 kW At 30% of the nominal heat output and at a low temperature regime(**) P1 7.1 Declared load profile XL RESIDENCE KI DGT No RESIDENCE KI DGT N is a gas-fired wall-mounted boiler for space heating and sanitary use having a stainless steel plate exchanger. It is an electronically controlled boiler with automatic ignition, ionisation flame control, modulating heating and DHW. It has an open combustion chamber and, according to the flue gas accessory used, is classified in the B11BS category. Switching of the heating and DHW modes takes place with an electric three-way valve which is in DHW in the rest position. To ensure correct water flow in the exchanger, the boiler is equipped with an automatic by-pass; it is also complete with security, expansion and distribution accessories. The RESIDENCE KI DGT N boiler is equipped with: microprocessor management and control with visualized self-diagnosis anti-blocking circulator and three-way valve first level antifreeze (suitable for indoor installations) predisposition for room thermostat or time programmer or zone valves digital display indicating the operating temperature and fault codes. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO FAMILY CONDENS 3.0 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP 2015 : Family Condens a technologically advanced wall-hung boiler which best combines comfort, energy saving and respect for the environment. Product code: 20102936 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Furnace thermal power (heating) min-max: 3.2÷25.0 kW Useful thermal power (sanitary) min-max: 3.2÷30.0 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 106.8% Profit return 30% (47th return): 109.9% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 17.2 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxwxd) mm 845 x 453 x 358 ; 43 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: LPG General characteristics FAMILY CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Models for combined instantaneous and storage heating For indoor, outdoor and recessed installations Family Condens is a wall-mounted boiler that combines comfort, energy saving and respect for the environment in the best possible way. The new primary heat exchanger completely made of aluminum with front access to the combustion chamber (models 2.5 and 3.0) guarantees better efficiency and duration. Family Condens is available with powers from 2.8 to 35 kW. Characteristics: Modulation ratio 1:10 (minimum power 2.8 kW) which allows the boiler to respond to all heat requests Modulating circulator, low consumption (IEE≤0.20) 3 Stars in sanitary comfort according to EN 13203 Remote alarm system that allows remote signaling of the boiler lockout status Special Family functions: Wellness button, Memory button, Touch&Go function, Intelligent system filling Assembly template, hydraulic fittings and power supply cable supplied LPG conversion kit (G31) supplied for 3.5 models Standard external probe. ErP: Energy related Products The new European regulations for heat generators ErP is the acronym of “ Energy related Products ” (products connected to the use of energy) and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design ("eco-design "). The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water. From the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players. The energy labeling of products for heating and domestic hot water production The regulations issued require that all products intended for heating and/or for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range.   In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate.   This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to manufacturers . Product Guarantee All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

ATTENTION THIS PRODUCT IS MADE TO ORDER. SHIPPING TAKES PLACE WITHIN 10 WORKING DAYS FROM THE DATE OF PURCHASE RIELLO RESIDENCE EXTERNA CONDENS 32 KIS METHANE CONDENSING BOILER COMPLETE WITH FUME KIT -NEW ErP Technical features Product code: 20096735 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Firebox thermal power (heating): 30 kW Useful thermal power (sanitary): 32 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 104.7% Profit return 30% (47th return): 109.5% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 18.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxwxd) mm 785 x 553 x 275 ; 46 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE RESIDENCE EXTERNAL CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models For outdoor installations Residence Externa Condens is specifically designed for outdoor installation and stands out for its extremely small dimensions. Equipped as standard with the exclusive Riello condensing exchanger, completely made of aluminum and without welding, synonymous with efficiency and durability, resistant to system dirt with high heads and excellent heat exchange. The climatic regulation is managed directly via the boiler board: this allows the temperature of the heating system to be suitably adapted to the external climatic conditions. Residence Externa Condens is controlled directly from inside the home thanks to the exclusive remote control supplied as standard. Residence Externa Condens is available with powers from 20 to 32 kW. Characteristics: Remote control panel supplied as standard Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) Antifreeze function that protects the heating and DHW circuits down to -5°C with the possibility of extending the protection down to -15°C (optional) "Winter with Pre-heating" function: allows the DHW exchanger to be maintained at temperature, reducing waiting times during withdrawal (instantaneous combined models) Possible "open-air" installation using the special waterproof kit (optional) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO RESIDENCE IN CONDENS 32 KIS METHANE CONDENSING BOILER WITH FUME KIT + BUILT-IN UNIT - NEW ErP Technical features Product code: 20096732 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Firebox thermal power (heating): 30 kW Useful thermal power (sanitary): 32 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 104.7% Profit return 30% (47th return): 109.8% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 18.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxwxd) mm 785 x 553 x 268 ; 43kg Built-in dimensions (hxlxp) mm 1223 x 654 x 286 ; 24kg Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE General characteristics RESIDENCE IN CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models For outdoor recessed installations Residence In Condens allows for the technological level and high performance of the Residence Condens indoor version to be concealed in the wall. The innovative Riello heat exchanger, completely made of seamless aluminum, is synonymous with efficiency and durability, resistant to system dirt, offers excellent head and high heat exchange. Thermoregulation is managed directly by the boiler board and via the external probe (accessory) it allows suitably adapting the temperature of the heating system to the external climatic conditions. Residence In Condens is available with powers from 25 to 32 kW. Characteristics: Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at the right temperature, reducing waiting times during withdrawal (instantaneous combined models only) Antifreeze function that protects the heating and DHW circuits down to -5°C (external and built-in versions) with the possibility of extending the protection down to -15°C (optional) The remote control panel (optional) allows you to manage the boiler directly from inside the home Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO START CONDENS 25 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP General characteristics Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 20 kW Heating rated heat output: 19.5 kW Sanitary nominal heat input: 25 kW Sanitary nominal thermal power: 25 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn (50°/30°): 104.2% Profit return 30% (47th return): 108.9% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 14.3 l/min Dimensions (hxwxd) mm 792 x 405 x 248 ; 30 Kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: LPG Technical features START CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Combined models for indoor, outdoor, built-in, with stainless steel storage tank Start Condens is the new Riello condensing wall-mounted proposal for small and medium-sized domestic users. The new compact aluminum condensing exchanger guarantees efficiency and reduction of polluting emissions. It can also be installed outdoors in a partially protected place. It is available in version 25 (with 25 kW of DHW power and 20 kW in heating) and 29 (with 29 kW of DHW power and 25 kW in heating). Characteristics: Low consumption circulator (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at temperature, reducing waiting times during withdrawal (can be activated by the user) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Natural gas operation as standard with the possibility of conversion to LPG (G31) and propane air (accessories), this modification is the responsibility of the installer or the technical assistance service. Possibility of outdoor installation in partially protected places, using special accessory kits. Yield **** Low polluting emissions Aluminum condenser, with premix burner Combined models and heating only for indoors, outdoors in partially protected places ErP: Energy related Products The new European regulations for heat generators ErP is the acronym of “ Energy related Products ” (products connected to the use of energy) and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design ("eco-design "). The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water. From the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players.   The energy labeling of products for heating and domestic hot water production The regulations issued require that all products intended for heating and/or for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G.   A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range. In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to builders. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO START AR 25 KIS METHANE CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP Product code: 20101168 Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Heating/DHW operating characteristics: Heating nominal heat input: 25 kW Heating nominal heat output: 24.35 kW Sanitary nominal heat input: 25 kW Sanitary nominal thermal power: 25 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn max - Pn min (80°-60°) % 97.4-95.0 Profit return 30% (47th return) % 95.2 Sealed chamber, forced draught Electric power W 123 Quantity of hot water with Δt 25°C: 14.3 l/min Dimensions (hxlxp) mm 780 x 400 x 332 ; 40 Kg Electrical protection degree: IP X5D Power supply: LPG START AR Yield **** Combined models Start AR is the condensing boiler specifically designed to work with high temperatures and therefore with radiator systems; it is specially designed to have a reduced formation of condensate with system return temperatures above 50°C. It is available in powers of 25 and 29 kW. Characteristics: Low consumption circulator (IEE≤0.20) Climatic regulation managed directly by the boiler control unit Assembly template, hydraulic fittings, power supply cable supplied ErP: Energy related Products The new European regulations for heat generators ErP is the acronym of “ Energy related Products ” (products connected to the use of energy) and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design ("eco-design "). The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water. From the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players. The energy labeling of products for heating and domestic hot water production The regulations issued require that all products intended for heating and/or for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range. In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to builders.   Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less