Chaffoteaux Condensing Boiler mod. NIAGARA ADVANCE 35 C low NOx Complete with Methane Fume exhaust kit Code: 3310627 Power 35 kW Energy class in heating A Energy class in sanitary A Pickup profile XXL Dimensions HxWxD 900 x 600 x 460 mm Technical data Nominal heat input in heating max/min (Hs) Qn 34.5/3.5 kW Max/min DHW nominal heat input (Hs) Qn 38.3/3.9 kW Efficiency at nominal heat input (60/80°C) Hi/Hs 97.5/87.8% Performance stars (dir. 92/42/EEC) **** NOx class 6 Expansion tank capacity 8l Power supply voltage/frequency 230 / 50 V/Hz Degree of protection of the electrical system IP X5D NIAGARA ADVANCE Niagara Advance , a concentrate of performance, comfort and compactness, combines the technology of the new Advance range with two 20-litre boilers to meet the most demanding domestic hot water needs. MAXIMUM PERFORMANCE New single coil primary heat exchanger in stainless steel. Passage sections increased by 142% compared to the previous version. 1 m more head. Seasonal yield at 94%. Class A+ reachable with thermoregulation. Performance certified by the TÜV RHEINLAND Group. MAXIMUM COMFORT Modulation ratio 1:10. Optimized internal silencer. SRA function. Gas transformation with kit included as standard. Ready for Chaffolink connectivity. HEALTHCARE COMFORT 40 liter reserve thanks to two stratified stainless steel inter-accumulators. Permanent availability of domestic hot water even with discharged inter-tanks. Domestic hot water performance ***, maximum level foreseen by the EN 13203 standard. Flow rate up to 19.8 l/min with ΔT = 25ºC. Integrated 2-litre sanitary expansion tank. EASY INSTALLATION Installation in partially protected places. Smoke outlets 80, 60, 50 mm. Intuitive electrical connections. ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT Up to 20% energy savings in combination with Expert Control and the SRA function. Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.
€1.720,00
Overview CHAFFOTEAUX CX GREEN 24 EU CONDENSING BOILER COMPLETE WITH METHANE FUME KIT - NEW 2017 MODELÿThe new compact condensing boiler with aluminum alloy condensing exchanger with all the necessary requirements to achieve the required standards in terms of energy savings Technical specifications Product code:ÿ3310508 Energy label specifications according to the European ErPÿ directive ClassÿA heating energy efficiency Sanitary energy efficiency ClassÿA Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Nominal heat input in heatingmax/min (Hi):ÿ23.5/4.5ÿkW Nominal heat input in sanitary max/min (Hi):ÿ23.5/4.5ÿkW Heating max/min thermal power (80øC-60øC):ÿ23/4,4ÿkW Efficiency at nominal heat input:ÿ97.7 / 88% Efficiency 30% of nominal heat input:ÿ104.3 / 94 % Capacity of the expansion vessel: 8 lt Min/max heating temperature (high temperature range)øC 35/82 Min/max heating temperature (low temperature range)øC 25/45 Sanitary temperature min/maxøC 36/60 Instantaneous quantity of hot water T=25øC l/m 13.9 Instantaneous quantity of hot water T=35øC l/m 9.9 Minimum withdrawal of hot water l/m <2 Electrical data: Supply Voltage/Frequency V/Hz 230/50ÿ Total absorbed electrical power W 34ÿ Electrical protection degrees IP X5D Main features CX GREEN EU The compact condensing boiler with aluminum alloy condensing exchanger and with all the necessary requirements to achieve the required standards in terms of energy savings. Operationssolmethane. Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic water performance: stars **. Flow rate 13.1 litres/minute with T = 25§C. (24kW) Heating comfort Efficiencyfinal 108% with energy savingsfinal 35%. 4 star efficiency of combustion in compliance with the EN92/42 standard. Modulation range from 25% to 100% of maximum power. Condensing exchanger in aluminum alloy. Reduced polluting emissions, NOx class 5. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Arrangement for integration into a heating system via the Ebus2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Possibility of managing single-temperature and multi-temperature zones using Expert Control. Self-diagnosis system by code. LCD display. Convenience of installation use Possibility of connection with external probe. Compatible with Expert Control, modulatingÿ and on/off accessories. Easier start-up: automatic purge function and directly accessible combustion adjustment. Save energy and respect the environment Final 20% energy savings in combination with chronothermostat external probe. 40% reduction in CO2 emissions**. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres or As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. It's about me tooÿ YES, it affects everyone: professionals and end users The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier's responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. Responsibilities of Resellersÿ First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€740,00
CHAFFOTEAUX MIRA ADVANCE 30 kW GAS BOILER LINK Wi-Fi METHANE WITH FUME EXHAUST KIT Model: Mira Advance Link; Typology: Condensation; Code: 3310613; Energy class in heating: A++; Energy class in sanitary: A; Load profile: XL; Power supply: LPG/CNG AutoAdapt function; Heating performance: Nominal heat input in heating (max/min): 31.1/3 kW; Useful heating power 80º C/ 60º C (max/min): 27.5/2,8 kW; Useful heating power 50º C/ 30º C (max/min): 30.3/3.1 kW; Expansion vessel pre-charge pressure: 1 bar; Maximum pressure: 3bar; Expansion vessel capacity: 8 l; Min/max heating temperature (high temperature range): 35 / 82 °C; Min/max heating temperature (low temperature range): 20 / 45 °C; Efficiency at nominal power 60/80: 98.4%; Efficiency at nominal power 30/50: 108.3%; Efficiency at 30% of nominal power: 109.5%; Up to 25% energy savings in combination with Expert Control and the SRA function; Up to 35% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor; Reduced polluting emissions, NOx Class 6; Performance in Healthcare: Thermal capacity (max/min): 30.0/ 3.0 kW; Useful power (max/min): 33.3/3.3 kW; Temperature (min/max): 36 / 60 °C; Specific flow rate in sanitary mode (10 min. with ∆T=30°C: 14.3 l/min; Instantaneous quantity of hot water ∆T=25°C: 17.2 l/min; Instantaneous quantity of hot water ∆T=35°C: 12.3 l/min; Minimum withdrawal of hot water: 2 l/min; Sanitary water pressure (max/min): 7.0 / 0.2 bar; Electrical data: Supply voltage: 230V; Power Consumption: 91W; Electrical protection degree: IP X5D; Minimum ambient temperature of use*: >0; Installation: Installation in partially protected places; Smoke outlets 80, 60, 50 mm; Intuitive electrical connections; Dimensions: (HxWxD): 745x400x385mm; Weight: 32.3kg; MIRA ADVANCE LINK Mira Advance Link, powerful core for amazing control. Equipped with the innovative SpinTech exchanger, it excels in its category thanks to the electronic combustion control, integrated Chaffolink connectivity, Expert Control and standard external probe. Can be installed in partially protected places Maximum Performance: New single coil primary heat exchanger in stainless steel. Passage sections increased by 142% compared to the previous version. 1 m more head. Seasonal yield at 94%. Class A+ reachable with thermoregulation. Performance certified by the TÜV RHEINLAND Group. Maximum Comfort Modulation ratio 1:10. Electronic combustion control E-Burning System. SRA function. Gas transformation from the technical menu without the need for a kit. Chaffolink connectivity integrated in the boiler. External temperature from the internet thanks to integrated connectivity. Ease of Installation Installation in partially protected places. Smoke outlets 80, 60, 50 mm. Intuitive electrical connections. Energy saving and respect for the environment Up to 25% energy savings in combination with Expert Control and the SRA function. Up to 35% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.215,00
ATTENTION ! The boiler will be supplied with methane, for LPG operation you must contact your local Authorized Assistance Centre. Technical features Model : Divacondens D Plus Nominal thermal power: 24 kW Power supply: methane Specifications Energy efficiency according to the European ErP directive Heating Energy Efficiency Class: B Seasonal Space Heating Energy Efficiency : 89% Performance Heating Thermal Capacity : 7,5 ~ 25,0 kW Heating Thermal Power: 7.2 ~ 24.2 kW Ultimate Thermal Efficiency 30% Pmin : 100.1% Domestic Hot Water Production 25°C Δt 30°C : 13,9 ~ 11,6 l/min NOx emissions 6 Dimensions and weight Dimensions (LxHxP): 400x700x330 mm Weight : 35Kg Ferroli Divacondens D Plus Boiler The Simplest Solution For A Condensing Boiler DIVACONDENS D PLUS is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes and a new cooled burner with low NOx emissions. The Range Divacondens D Plus is offered in a single model for heating and instantaneous production of domestic hot water Characteristics > Condensing boiler for heating high temperature systems and producing domestic hot water. It is not suitable for combination with direct delivery to systems with low temperature radiant panels > Compact geometry primary exchanger > Instant production of domestic hot water with dedicated plate exchanger > Post-recovery of the latent heat of condensation, in function of pre-heating of the primary circuit > Forced draught sealed chamber boiler, with water-cooled atmospheric burner with low NOx emissions > Standard automatic hydraulic by-pass > Minimum polluting emissions (class 6 according to EN 15502-1) > High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity > Can be combined with the modulating remote timer control > Simple and complete control panel, display user interface, with setting keys > Robust post-condenser fed by the closed circuit of the primary. The heat exchange with the fumes takes place inside large diameter water passages. > Generator with simple and rational operation > ECO function in DHW for greater savings in the period of low use of hot water > Predisposition for solar systems: prearranged for the production of domestic hot water combined with solar panel systems > Place of installation: also for outdoors in a partially protected place down to -5°C as standard > Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center > Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre Boiler control The DIVACONDENS D PLUS control unit consists of an easy-to-use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. The performances Energy classification DHW load profile (maximum flow rate at the corresponding efficiency declared in DHW) Efficiency in the production of domestic hot water FOR COMBINED BOILERS The "climate-energy 20/20/20" package sets ambitious targets for the reduction of greenhouse gas emissions, of energy consumption as well as the increase in the use of renewable energies, corresponding to a percentage of 20% to be reached by 2020. In this context, the European regulation ErP (Energy Related Products) introduces an energy classification also for water generators hot water for space heating and domestic hot water purposes. This classification translates into an energy label which must necessarily accompany all the products affected by the Regulation, introduced on the market from 26 September 2015. The labeling constitutes an easy guide for the consumer, who can choose - through standardized and objective indications - the product more efficient. In this way, the choice will be the most sparing in terms of consumption for the benefit of the user, but also the most virtuous for energy balances and consequently, for the environment. The most significant parameters indicated on the label are the seasonal efficiency index in heating and efficiency in the eventual production of domestic hot water, according to a scale which, in the case of the single boiler product, ranges from A to G*. Furthermore, for combined boilers, a load profile is indicated corresponding to the DHW flow rate of the appliance measured in a series of typical samplings, guaranteeing at least the declared DHW efficiency. This index is identified with a letter/”size” (S, M …XXL). Solar circuit integration DIVACONDENS D PLUS boasts electronics that simplify integration with thermal solar systems, both with natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and switches on the burner only if necessary. To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. In case of insufficient irradiation and therefore a modest pre-heating of the domestic water, the boiler will contribute with the heat necessary to reach the required set point temperature. If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the mixing of the thermostatic valves. Safety and comfort ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function makes it possible to recover all the heat supplied by thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (customizable duration) and is active after the burner goes out in heating mode. SLIDING TEMPERATURE OPERATION With the installation of the “external probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The electronic board of DIVACONDENS D PLUS adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€580,00
The boiler is supplied with methane. Transformation of methane/LPG/Propaned air to be requested in advance from the Authorized Assistance Centre Technical features Model : Divatech D LNC 30 Product code : 0DCC6YWA Power supply: methane / LPG Energy efficiency Heating energy efficiency class: C Sanitary energy efficiency class: A ACS profile : XL Performance Heating nominal heat output : 11.1 ~ 30.0 kW Heat output : 12.6 ~ 33.0 kW Domestic useful thermal power: 30.0 kW Efficiency : 91.0 % Maximum production of domestic hot water Δt 25°C : 17.2 l/min Maximum production of domestic hot water Δt 30°C : 14.3 l/min NOx : 6 Dimensions and weight Dimensions (HxWxD): 700x400x330 mm Empty weight: 30.0 Kg Ferroli boiler DIVATECH D LN LOW NOX Wall mounted boiler with instantaneous domestic hot water production with double exchanger , open chamber, natural draft Strengths - Compact geometry primary heat exchanger entirely in copper - Instantaneous production of domestic hot water with dedicated plate domestic heat exchanger - Standard by-pass - Open chamber and natural draft boiler, with low NOx emission atmospheric burner , in AISI 304 stainless steel - High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity - Can be combined with the modulating remote timer control - Casing painted white by anaphoresis with epoxy powders - Simple and complete control panel, display user interface, with setting keys - Compact dimensions and low weight Advantages of Divatech D LN - Modulating heat input both in heating and in DHW production, managed by an electronic microprocessor card - ECO/COMFORT system for rapid production of domestic hot water - Adjustable post-circulation after the heating phase - Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems - Certified operation also with propane air by means of a specific transformation to be requested from the Authorized Assistance Centre - Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€570,00
ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE, MA PRESENTA AMMACCATURE AD ENTRAMBI I LATERALI, AMMACCATURA SULLA PARTE FRONTALE IN PROSSIMITÀ DEL PANNELLO DI COMANDO, SONO STATE INSERITE VITI NON DI SERIE INTERNAMENTE E L'IMBALLO È USURATO (PER MAGGIORI INFORMAZIONI SUI DANNEGGIAMENTI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE). Caldaia a Camera Aperta Chaffoteaux Pigma Ultra 30 CF Low NOx Metano cod. 3310638 - NEW ErP Classe di efficienza energetica per la produzione di acqua calda B Profilo di carico XL Codice prodotto 3310638 Potenza termica nominale max/min 29,5/ 13 kW Capacità vaso d’espansione 8l Potenza termica nominale max/min (sanitario) PCI 29,5/ 13 kW Portata acqua calda a ΔT 25º C 15,8 l/min Classe NOx 6 Tensione di alimentazione 230 V~ (50 Hz) Grado di protezione elettrico IP X4D Dimensioni AxLxP 745x400x319 mm PIGMA ULTRA Grazie alla dimensioni compatte, al comfort sanitario garantito dalle 2 stelle di prestazione e alla tecnologia del display digitale, che consente una gestione ottimale del riscaldamento, riesce a creare un ambiente confortevole, adatto ad ogni tipo di esigenza e d‘installazione. Basse emissioni di NOx: conforme alla normativa Erp del 26.09.2018 COMFORT SANITARIO Scambiatore sanitario in acciaio inox. Prestazioni di acqua sanitaria **, secondo la norma EN 13203. Portata da 14,2 a 15,8 l/min con ΔT = 25ºC. Produzione di ACS controllata gestita da due sonde e un flussimetro sanitario per una migliore stabilità della temperatura in base al tipo di prelievo. Funzione comfort on/off programmabile COMFORT NEL RISCALDAMENTO Funzione SRA, sistema automatico di regolazione della caldaia in funzione dei requisiti di riscaldamento. Circolatore alta efficienza con modulazione continua per migliorare il comfort acustico e ridurre i consumi energetici. Termoregolazione climatica differenziata di 2 circuiti, in funzione della temperatura ambiente e/o esterna. Predisposizione per l’integrazione in un sistema di riscaldamento tramite il nuovo protocollo di comunicazione Ebus2 (caldaie, solare, moduli gestione impianto e accessori di termoregolazione modulanti). Display LCD con visualizzazione: storico, autodiagnosi, temperature di funzionamento. COMFORT D'USO E INSTALLAZIONE Compatibile con Expert Control: gestore di sistema intuitivo per la gestione di 3 circuiti, in funzione della temperatura ambiente e/o esterna per un maggior comfort e un maggior risparmio energetico. Nuove connessioni elettriche intuitive. Avviamento più facile: funzione di spurgo automatico e regolazione della combustione accessibile direttamente. Compatta e perfettamente adattabile a qualunque tipologia di abitazione. RISPARMIO ENERGETICO E RISPETTO DELL'AMBIENTE Fino al 15% di risparmio energetico in combinazione con Expert Control, sonda ambiente modulante e funzione SRA. Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€585,00
ATTENZIONE. IL PRODOTTO È NUOVO E FUNZIONANTE MA PRESENTA UNA LEGGERA AMMACCATURA SULLA PARTE INFERIORE DEL PANNELLO FRONTALE E L'IMBALLO È USURATO. (PER MAGGIORI INFORMAZIONI SUI DANNEGGIAMENTI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE) La caldaia viene fornita a metano. Trasformazione metano/GPL/Aria propanata da richiedere preventivamente al Centro Assistenza Autorizzato Caratteristiche tecniche Modello : Divatech D LN C 30 Codice prodotto : 0DCC6YWA Alimentazione : Metano / gpl Efficienza energetica Classe di efficienza energetica riscaldamento : C Classe di efficienza energetica sanitario : A Profilo in A.C.S. : XL Performance Potenza termica nominale riscaldamento : 11,1 ~ 30,0 kW Portata termica : 12,6 ~ 33,0 kW Potenza termica utile sanitaria : 30,0 kW Rendimento : 91,0 % Produzione massima di acqua calda sanitaria Δt 25°C : 17,2 l/min Produzione massima di acqua calda sanitaria Δt 30°C : 14,3 l/min NOx : 6 Dimensioni e peso Dimensioni (HxLxP) : 700x400x330 mm Peso a vuoto : 30,0 Kg Caldaia Ferroli DIVATECH D LN LOW NOX Caldaia murale con produzione sanitaria istantanea a doppio scambiatore , camera aperta, tiraggio naturale Punti di forza - Scambiatore primario di calore a geometria compatta interamente in rame - Produzione istantanea di acqua calda sanitaria con scambiatore sanitario a piastre dedicato - By-pass di serie - Caldaia a camera aperta e tiraggio naturale, con bruciatore atmosferico a basse emissioni di NOx, in acciaio inox AISI 304 - Circolatore alta efficienza a basso consumo (ErP - Classe A) con sistema antibloccaggio tramite attivazione per alcuni secondi ogni 24 ore di inattività - Abbinabile al cronocomando remoto modulante - Mantellatura verniciata di bianco per anaforesi a polveri epossidiche - Pannello comandi semplice e completo, interfaccia utente a display, con tasti di impostazione - Dimensioni compatte e peso contenuto Vantaggi di Divatech D LN - Portata termica modulante sia in riscaldamento che in produzione sanitaria, gestita da scheda elettronica a microprocessore - Sistema ECO/COMFORT per una rapida produzione dell’acqua calda sanitaria - Post-circolazione regolabile dopo la fase di riscaldamento - Predisposizione impianti solari: predisposta per la produzione di acqua calda sanitaria combinata con impianti a pannelli solari - Funzionamento certificato anche ad aria propanata mediante apposita trasformazione da richiedere al Centro Assistenza Autorizzato - Funzionamento anche a GPL con l’utilizzo di un apposito kit di conversione da richiedere al Centro Assistenza Autorizzato. Trasformazione gratuita in sede di verifica del prodotto ed attivazione della garanzia solo qualora il codice specifico funzionante a GPL non fosse disponibile Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€515,00
Caratteristiche tecniche Modello : InoxDens 28S Codice prodotto : 10313.1010.0 Alimentazione : Metano Efficienza energetica Classe di efficienza energetica riscaldamento : A Classe di efficienza energetica sanitario : A Profilo di prelievo : XL Performance Portata termica nominale riscaldamento : 25,0 kW Portata termica nominale sanitario : 29,0 kW Potenza utile massima riscaldamento 60°/80°C : 24,5 kW Potenza utile massima sanitario 60°/80°C : 28,4 kW Potenza utile massima riscaldamento 30°/50°C : 26,9 kW Potenza utile massima sanitario 30°/50°C : 31,1 kW Rendimento nominale 60°/80°C : 98,0% Rendimento nominale 30°/50°C : 107,4% Classe NOx : 6 NOx ponderato : 28 mg/kWh Temperatura minima e massima riscaldamento : 25° ~ 85°C Pressione minima e massima riscaldamento : 0,3 ~ 3 bar Capacità del vaso espansione : 7,0 litri Temperatura minima e massima sanitario : 30° ~ 60°C Portata massima (ΔT=25 K) : 16,5 l/min Portata massima (ΔT=35 K) : 11,5 l/min Portata sanitari specifica (ΔT=30 K) : 13,8 l/min Alimentazione (V,Hz, Ø) : 220~240/50/1 Grado di protezione : IPX5D Dimensioni e peso Dimensioni (AxLxP) 700x400x300 mm Peso : 31,3 Kg Caldaia a condensazione premiscelata Savio InoxDens S InoxDens completa la gamma SAVIO a condensazione premiscelata: perfetta per impianti a radiatori e idonea con sistemi radianti con gruppi di miscelazione. InoxDens è la caldaia a condensazione compatta che assicura alti rendimenti, bassi consumi e rispetto per l’ambiente. Disponibile per riscaldamento e produzione di acqua calda sanitaria, nelle potenze 24, 28 e 32 kW. Scambiatore primario condensante in acciaio INOX con rivestimento in acciaio per offrire la massima resistenza alla corrosione Bruciatore a premiscelazione totale, acciaio INOX (Classe NOx 6) Modulazione 1:5 Metano e anche GPL Scambiatore sanitario a piastre in acciaio INOX Vaso di espansione da 7 litri Pompa ad alta efficienza con basso consumo energetico Integrazione a sistemi solari Savio, mediante kit solare Lettura digitale nel display della pressione Predisposizione per comando remoto e sonda esterna Gruppo idraulico compatto in ottone. Gruppo di mandata con deviatrice motorizzata, by-pass e rubinetto di carico impianto integrati.Circolatore ERP con sblocco pompa manuale su gruppo di ritorno. Funzionalità del pannello comandi Selettore estate/inverno/off Regolatore temperatura riscaldamento Regolatore temperatura sanitario Lettura digitale della pressione Visualizzazione temperatura sanitaria e riscaldamento da display Visualizzazione diagnostica guasti, stato di blocco e storico guasti Il display opera secondo le modalità: Informazioni disponibili sullo stato di funzionamento e storico errori Parametri programmabili per adeguamento generatore/impianto e SET Utente Parametri generatore Parametri Centri Assistenza Autorizzati Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€940,00
NB: PRODOTTO NUOVO E FUNZIONANTE, PRESENTA UN' AMMACCATURA LUNGO IL BORDO DESTRO CAUSATA DAL TRASPORTO COME DA FOTO. IMBALLO DANNEGGIATO Caratteristiche Tecniche Classe energetica in riscaldamento: A Classe energetica in sanitario: A Profilo di carico: XL Performance in riscaldamento: Portata termica (min./max): 4.3/31.1 kW Potenza utile (min./max.): 3.9/30.0 kW Rendimento termico utile: 98.0 % Rendimento al minimo (60/80°C): 91,1 / 82 % Potenza utile riscaldamento max/min (80°C-60°C): 27.4/3.9 kW Stelle di rendimento (dir. 92/42/EEC): **** Performance in sanitario: Portata termica (min./max): 4.3/33.3 kW Potenza termica (max/min) sanitario: 24.9/2.4 kW Circuito Riscaldamento: Pressione di precarica vaso di espansione: 1 bar Pressione massima di riscaldamento: 3 bar Capacità vaso di espansione: 8 L Temperatura di riscaldamento min/max (range alte temperature): 35 / 82 °C Temperatura di riscaldamento min/max (range basse temperature): 20 / 45 °C Circuito Sanitario: Temperatura sanitario min/max: 36 / 90 °C Portata specifica in sanitario (10 min. con ∆T=30°C: 14.5 l/min Quantità istantanea di acqua calda ∆T=25°C: 17.4 l/min Quantità istantanea di acqua calda ∆T=35°C: 12.5 l/min Stelle comfort sanitario (EN13203): *** Prelievo minimo di acqua calda: 2 l/min Pressione acqua sanitaria max/min: 7,0 / 0,2 bar Dati Elettrici: Indice di protezione IPX5D Classe 6 NOx Indice di efficienza energetica del circolatore: EEI ≤ 0,23 Temperatura ambiente minima di utilizzo: >0°C Potenza elettrica assorbita totale: 80 W Alimentazione: METANO (G20/G30) Dimensioni: (HxLxP): 745x400x385 mm; Peso: 29,7 kg Pigma è la nuova Caldaia di CHAFFOTEAUX, Che fa parte della Gamma Advance, risultando essere leader di categoria dal design completamente rinnovato, utilizzando l’innovativo scambiatore SpinTech, controllo elettronico della combustione, all'integrata connettività Chaffolink e all’Expert Control e sonda esterna di serie, garantendo altissime prestazioni a consumi estremamente ridotti. Installabile in luoghi parzialmente protetti. Caratteristiche SpinTech: Scambiatore che lavora con monospirale in acciaio Inox Nuovo scambiatore primario in acciaio inox a spira unica Sezioni di passaggio aumentate del 142% rispetto alla versione precedente 1 m in più di prevalenza Rendimento stagionale al 94% Classe A+ grazie agli accessori di termoregolazione di serie Prestazioni certificate dal Gruppo TÜV RHEINLAND. Regala Comfort: Rapporto di modulazione 1:7 Silenziatore interno ottimizzato Funzione SRA Trasformazione gas con kit incluso di serie Predisposta per la connettività Chaffolink Vantaggi: Installazione in luoghi parzialmente protetti Scarichi fumi 80, 60, 50 mm Connessioni elettriche intuitive Fino al 20% di risparmio energetico in combinazione con Expert Control e la funzione SRA Fino al 30% di risparmio energetico combinando Expert Control, la funzione SRA, la sonda esterna e il pavimento radiante. Emissioni inquinanti ridotte, Classe NOx 6.
€880,00
Technical features Product code: 3310616 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Heating nominal heat input max/min (Hi): 28/3.0 kW DHW nominal heat input max/min (Hi): 30.0/3.5 kW Performance Stars **** Expansion tank capacity 8 l Instantaneous quantity of hot water (∆T=25 K): l/min 17.2 Domestic water pressure max/min bar 7.0/0.2 Electrical characteristics Supply voltage/frequency: V/Hz 230/50 IP X5D degree of protection Dimensions Weight: 32.3kg General characteristics AIM ADVANCE Mira Advance is the condensing boiler born for the future with a powerful soul, Spin Tech, the new exchanger with a completely renewed design that offers high performance, to improve domestic comfort and adapt to every need. Maximum Performance: New single coil primary heat exchanger in stainless steel. Passage sections increased by 142% compared to the previous version. 1 m more head. Seasonal yield at 94%. Class A+ reachable with thermoregulation. Maximum Comfort Modulation ratio 1:10. Electronic combustion control E-Burning System. SRA function. Gas transformation from the technical menu without the need for a kit. Ready for Chaffolink connectivity. Ease of Installation Installation in partially protected places. Smoke outlets 80, 60, 50 mm. Intuitive electrical connections. Energy saving and respect for the environment Up to 25% energy savings in combination with Expert Control and the SRA function. Up to 35% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. All ready for Energy Labeling What is it about? From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the eco-design directive ( ErP known as « Energy Related Products ») imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows for comparisons on the performance and energy consumption of the product you wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. Is it about me too? YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015 , the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its devices or systems with the following documentation: product energy label; technical product sheet; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices; technical data sheet of the system with the parts relating to the product or system already completed. Dealer Responsibility First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device and/or system to the public. Therefore even professionals such as plumbers, installers or planners can fall into this category. Everyone is required to ensure that: all appliances and/or systems have their respective labels and make sure that they are clearly visible; all devices and/or systems are always accompanied by the mandatory technical data sheets; any type of advertising, promotional or technical material showing energy data or price indications contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP) : The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of device, there are different labels. Those with efficiency classes A, A+ and A++ certify the products with the highest performance. Furthermore, two different classifications are envisaged for domestic heating and for the hot water production service, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the final customer can make his choice in the most informed way possible. SYSTEM LABEL In addition to the product label, the system label is also provided if a series of matched appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label in order to inform the end user in the best possible way. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.101,00
ATTENTION THE PRODUCT IS NEW AND 100% WORKING, BUT IT HAS DENT ON THE SIDE, THE DISPLAY IS SCRATCHED AND A SLIGHT CRACK (SEE PHOTO NEXT TO THE MAIN IMAGE) Technical features Energy class in heating: A Energy class in sanitary: A Load profile: XL Heating performance: Thermal input (min./max): 4.3/31.1 kW Useful power (min./max.): 3.9/30.0 kW Useful thermal efficiency: 98.0 % Idle efficiency (60/80°C): 91.1 / 82% Max/min useful heating power (80°C-60°C): 27.4/3.9 kW Performance stars (dir. 92/42/EEC): **** Healthcare performance: Thermal input (min./max): 4.3/33.3 kW DHW thermal power (max/min): 24.9/2.4 kW Heating circuit: Expansion vessel pre-charge pressure: 1 bar Maximum heating pressure: 3 bar Expansion tank capacity: 8 L Min/max heating temperature (high temperature range): 35 / 82 °C Min/max heating temperature (low temperature range): 20 / 45 °C Healthcare Circuit: Min/max domestic hot water temperature: 36 / 90 °C Specific flow rate in sanitary mode (10 min. with ∆T=30°C: 14.5 l/min Instantaneous quantity of hot water ∆T=25°C: 17.4 l/min Instantaneous quantity of hot water ∆T=35°C: 12.5 l/min Sanitary comfort stars (EN13203): *** Minimum withdrawal of hot water: 2 l/min Max/min domestic water pressure: 7.0 / 0.2 bar Electrical data: Protection index IPX5D Class 6 NOx Energy efficiency index of the circulator: EEI ≤ 0.23 Minimum ambient temperature of use: >0°C Total absorbed electric power: 80 W Power supply: METHANE (G20/G30) Dimensions: (HxWxD): 745x400x385mm; Weight: 29.7kg Pigma is the new CHAFFOTEAUX boiler, which is part of the Advance Range, resulting in the category leader with a completely renewed design, using the innovative SpinTech exchanger, electronic combustion control, integrated Chaffolink connectivity and Expert Control and external probe as standard, guaranteeing extremely high performance with extremely low fuel consumption. Can be installed in partially protected places. SpinTech features: Exchanger that works with a stainless steel monospiral New single coil primary heat exchanger in stainless steel Passage sections increased by 142% compared to the previous version 1 m more head Seasonal yield at 94% Class A+ thanks to the standard thermoregulation accessories Performance certified by the TÜV RHEINLAND Group. Give Comfort: Modulation ratio 1:7 Optimized internal silencer SRA function Gas transformation with kit included as standard Ready for Chaffolink connectivity Advantages: Installation in partially protected places Smoke outlets 80, 60, 50 mm Intuitive electrical connections Up to 20% energy savings in combination with Expert Control and the SRA function Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6.
€765,00
Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available In case of unavailability, the new DIVATECH D LNC 30 model will be supplied Technical features Model : Divaproject C30 Power supply: methane Performance Energy efficiency class in heating: C DHW energy efficiency class: A Heating nominal heat output : 11.5 ~ 33.0 kW Heat output : 9.7 ~ 30.0 kW Domestic useful thermal power: 30.0 kW Efficiency : 91 % Maximum production of domestic hot water Δt 25°C : 17.2 l/min Maximum production of domestic hot water Δt 30°C : 14.3 l/min Dimensions and weight Dimensions (HxWxD): 700x400x330 mm Empty weight: 30.0 Kg Ferroli Divaproject Boiler Wall mounted boilers with instantaneous DHW production with double exchanger, open chamber, natural draft The Divaproject c24 by Ferroli is the cheapest solution for replacing open chamber boilers. Built to be installed outdoors in partially protected places and prepared for integration with a solar panel system. It has an excellent value for money and is entirely Made in Italy with a 2-year guarantee . The cheapest in its category Arrangement for solar systems Eco-comfort system for rapid domestic hot water production High efficiency low consumption circulator (class A) Ideal for residential homes up to 120 m2 2 Year Warranty Divaproject is a heat generator for heating and instant domestic hot water production. The series has been designed in each of its components to have top performance in its category while maintaining characteristics of simplicity and compactness. The control electronics allow for easy and functional combination with solar collector systems. The series includes two models: C24 and C30 The boiler is designed to operate on natural gas and LPG or even on propane air by means of a special transformation. The efficiency of Divaproject is the maximum for its category, certified at 3 stars according to the 92/42 EEC Directive for energy classification Components Expansion tank Combustion chamber Copper primary exchanger Atmospheric burner Sanitary exchanger Modulating gas valve Motorized 3-way valve Boiler control Control panel and functions Divaproject's control and management electronics allow the user to customize the operation of the appliance in order to manage environmental comfort according to one's needs. The control panel with the adjustment knobs makes the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive Remote control "ROMEO" timer Divaproject boilers can be combined with a wide range of remote timer controls which allow the appliance to be adjusted and operated remotely. The ROMEO series consists of 4 models, respectively with weekly or daily comfort programming and with the possibility of choosing between wired or wireless connection for both With ROMEO you can: Adjust the heating and DHW temperatures Know the operating status of the boiler View the temperatures inside and outside the house Restart the boiler in case of temporary lockout Program the daily or weekly environmental comfort Activate/deactivate the heating function via the telephone The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings. With solar systems Sun Easy function Divaproject boilers have been designed to be easily inserted in systems made with the most recent technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously controls the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user Comfort and Safety Functions Eco-Comfort function In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Antifreeze function Even in stand-by mode, i.e. in the absence of a heat request, if a water temperature of 5°C is detected, it activates the anti-freeze protection by igniting the burner at minimum power, in order to avoid damage due to freezing. Post-circulation device All models are equipped with this particular timed device which allows, after the burner has been switched off in heating mode, to recover all the heat accumulated due to thermal inertia from the exchanger, transferring it to the radiators and therefore to the rooms to be heated Circulation anti-blocking device After 24 hours of inactivity, the boiler circulator is automatically started for about 5 seconds to prevent it from blocking after a long period of inactivity. Strengths > Compact geometry primary heat exchanger entirely in copper > Instant production of domestic hot water with dedicated plate exchanger > Simple and complete control panel, LED user interface > High efficiency low consumption circulator (ErP - Class A) with anti-blocking system > Combustion chamber in anti-corrosion aluminized sheet, internally insulated with ecological fiber and burner in AISI 304 stainless steel > Can be combined with the modulating remote timer control > Casing painted white by anaphoresis with epoxy powders > Compact dimensions and low weight > Modulating heat input both in heating and in DHW production, managed by an electronic microprocessor card > Adjustable post-circulation after the heating phase > ECO/COMFORT system for rapid production of domestic hot water > Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems > Standard by-pass Product Warranty : The warranty on this item is 24 months from the date of purchase.
€582,00
