Baxi Duo-Tec Compact E 28 kW low NOx condensing boiler complete with methane or LPG fume exhaust kit - News Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input kW 28.9 Heating nominal heat input kW 24.7 Seasonal space heating energy efficiency ŋs % 93 Emissions of nitrogen oxides NOx mg/kWh 17 Minimum operating temperature °C -5 Expansion vessel capacity l 7 Heating circuit water temperature adjustment °C 25-80 Domestic hot water production ∆T 25°C (1) l/min 16.1 DHW circuit minimum water flow rate l/min 2 Expansion vessel capacity l 7 Dimensions (hxlxp) mm 700x400x299 Degree of protection IPX5D NB: LPG OPERATION THROUGH ADJUSTMENT FROM THE AUTHORIZED SERVICE CENTER DUO-TEC COMPACT E range New design: change the aesthetics, not the performance. Luna Duo-tec E and Duo-tec Compact E: the already well-known Baxi boilers present themselves today with a new aesthetic, increasingly modern and attentive to new design trends, which allows them to be inserted in any living context. The control panel has also been completely renewed and is equipped with a new backlit LCD display that is even clearer and simpler to use thanks to dedicated and independent keys. The new boilers, even more beautiful and modern thanks to the restyling, however keep intact the characteristics that have always distinguished the Duo-tec range: Reliability. Robustness, durability and reliability in performance; Efficiency and savings. The reduction of the on/off cycles translates into considerable benefits in terms of energy savings and lower emissions; Completeness of range. Heating only models, with instantaneous DHW production, and also the compact version with the possibility of outdoor installation. The range has been further enriched with the new models equipped as standard with the Baxi Ma go (duo tec mago) modulating chronothermostat with integrated wi-fi The ideal boiler for new builds and replacements The Duo-tec E range of gas condensing boilers have been specifically designed in compliance with the requirements of the Ecodesign and Labeling Directives, to make them particularly suitable for both new builds and replacement old generator. The energy class, identified by a letter, expresses a range of efficiency values ​​within which the one expressed by the product in question resides. The label was created for the final consumer, so that, through real and comparable data, he can make informed choices by targeting high-efficiency products. Exchanger preheating function The boilers in the Duo-tec E range are equipped with the exchanger pre-heating function which guarantees the immediate production of domestic hot water at the set comfort temperature. In fact, the sanitary water passing through the plates of the preheated exchanger is already supplied at the desired temperature without waiting times. The function can be easily activated/deactivated by a specific boiler parameter Boiler info By pressing the dedicated key , it is possible to view numerous information regarding boiler operation such as: heating system water pressure (electronic pressure transducer present in the hydraulic unit); heating flow/return temperature; external temperature (with external probe installed); domestic hot water temperature. Efficiency and savings greater efficiency given by less switching on and off: with a high modulation ratio, the reduction of continuous switching on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions; adaptation of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises. Gas Adaptive Control It is an innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic control of combustion to constantly maintain maximum efficiency values. Advantages: there are no manual interventions - reduced measuring, calibration or changing nozzles with this system, the boiler self-adapts to the quality of the gas and the length of the flue gas pipes, keeping efficiency constant the boiler also constantly regulates itself to maintain the maximum efficiency values, favoring a reduction in gas consumption and generating less pollution thanks to the continuous control of emissions Outdoor installation Duo-tec Compact E boilers can be installed outdoors in partially protected places thanks to the new top cover kit and bottom closure kit (available as accessories). In fact, the Duo-tec Compact E range is equipped AS STANDARD with an electronic antifreeze system which guarantees operation down to a temperature of -5 °C: the IPX5D protection also protects the electrical parts from jets of water which may come from all directions. New modern and elegant design for the whole range Wide modulation range 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control Digital control panel with large backlit LCD display New cover kit: possibility of outdoor installation in partially protected places (optional accessory) Rigid and flexible Ø50 mm exhaust pipe connection: solution for restoring flues - for mod. 24 kW total length 40 meters (intake+exhaust) Compact dimensions: 700x400x299 mm hydraulic system Electric three-way diverter valve Pre-mix burner in stainless steel Stainless steel water/fumes exchanger Increased DHW exchanger in stainless steel which allows the boiler to condense even in DHW operation Modulating fan with electronic speed variation Automatic by-pass High efficiency circulation pump with total modulation Pump anti-blocking system and three-way valve which intervenes every 24 hours Heating circuit safety valve at 3 bar Thermoregulation system Standard climate control (with external probe available as an option) Arrangement for connection to a zone system Control system Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch that blocks the gas in the event of a water shortage NTC safety probe against fume overheating Temperature control using NTC probes Total antifreeze device Electronic thermometer Heating circuit pressure gauge Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : ecoTEC Intro VMW 24/28 AS/1-1 Article code : 0010026088 Power supply: methane Performance Heating power : 6.9 ~ 23.9 kW Nominal heat input in DHW : 6.9 ~ 28.0 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at 30% : 108.2% Domestic hot water production (ΔT = 30K): 13.4 l/min Domestic hot water temperature adjustment: 35°C ~ 60°C Modulation : 1:4 Expansion vessel pre-charge pressure: 0.75 bar Minimum water pressure: 0.3 bar Total electric power: 90 W Expansion vessel capacity: 8 litres Dimensions and weight Dimensions (HxWxD): 626x400x270 mm Weight : 25.6Kg Warranty extension to 7 years ecoTEC Intro VMW wall-mounted condensing boiler The most compact and lightest, now also for outdoor use The new ecoTEC intro VMW condensing boilers (for heating and domestic hot water production) are available in 24 and 28 kW power ratings, increasing the range of product choices within the consolidated range of Vaillant condensing boilers. In fact, this product gives new users the opportunity to approach the world of condensing boilers offered by Vaillant, without incurring excessive costs for replacing the old boiler. ecoTEC intro maintains the focus on energy saving by mounting a high-efficiency modulating pump that minimizes annual electricity consumption , with a consequent positive impact on bills. Also with regard to gas savings, Vaillant offers the new combustion technology , called fan push, where it is the fan which, thanks to the different levels of pressure exerted on the gas valve, guarantees the right ratio between combustion air and gas. The ecoTEC intro case is simple and essential, the dimensions appear to be extremely small which however do not affect or reduce the quality and efficiency of the product, guaranteed by Vaillant. The front panel introduces an innovative , extremely simple touch screen interface with 6 keys, black background display and 2 white digits with intermittent switching on. An additional e-bus connector has been added to the bottom of the boiler which allows connection to Vaillant temperature control units and thermostats. These wall mounted boilers are very simple to install thanks to their dimensions (62.6cm high, 40cm wide and 27cm deep) and low weight (about 26kg): these features make them ideal whenever replacement is required. All the components that are present in the product comply with the ErP energy efficiency regulations, a guideline also embraced by Vaillant, as a brand sensitive to environmental issues. This is all that the new ecoTEC intro can offer, in addition to a competitive price which does not affect performance. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoTEC wall mounted boiler intro Electricity consumption in standby less than 2W Innovative touch screen display Sanitary comfort even with low flow rates Low installation costs Small size Exchanger in stainless steel Pneumatic combustion system with complete pre-mixing Vertical hydraulic connections 1:4 modulation Instant DHW production 8 liter expansion vessel Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT BAXI ASSISTANCE IN ADVANCE Baxi Luna Classic 28 kW low NOx condensing boiler complete with methane or LPG fume exhaust kit New optional Wi-Fi Technical features Sanitary nominal thermal power kW 28.9 Heating rated thermal power kW 24.7 Useful thermal power at thermal power nom. and high temp. regime* P4 kW 24 XL load profile Seasonal space heating energy efficiency class A Water heating energy efficiency class A Seasonal space heating energy efficiency ?s % 94 Minimum operating temperature °C -5 Heating expansion vessel capacity l 7 Sanitary water production ?T 25°C (1) l/min 16.1 Dimensions (hxwxd) mm 700 x 395 x 285; 30 Degree of protection IPX5D CLASSIC MOON The new Luna Classic is the ideal product for apartments or small houses. Its compact dimensions (700x395x285 mm) ne allow installation in confined spaces such as kitchen wall units or in the laundry room. Excellent value for money, simple and intuitive management. The heart of the Luna Classic is the new electronic platform: this revolutionary system replaces the functions of the historical Luna models, raising the quality of the product to a new level. Great attention has been paid to meeting the needs of the end user. System customization and optimization are possible without compromising ease of use. The Luna Classic range includes 2 models for heating and the instantaneous production of domestic hot water, Luna Classic 24 and Luna Classic 28 User Interface Luna Classic Control Panel Renewed interface with: Backlit menu with icons; Simple settings to adjust the heating and domestic hot water temperature via two dedicated knobs; 4 buttons with dedicated functions: menu, confirm, back and reset. 2 functions for perfect water temperature Domestic hot water management can be enhanced and improved by activating two dedicated functions: relaxation function It is a pre-heating function which keeps the domestic hot water at the desired temperature for a pre-set period of time, or for 30 minutes after selecting the chosen temperature. Boost function Activates the boiler at maximum power for faster delivery of hot water. Baxi MaGO Luna Classic can be connected directly to the Baxi Mago, the modulating chronothermostat with integrated wi-fi that allows you to manage home comfort directly from an App. By downloading the dedicated App onto your smartphone, it will be possible to connect to one or more homes to control the temperature, manage the programming, display the consumption graph, read any messages error, set vacation mode, etc. The combination of the boiler with the Baxi Mago A+ kit increases its energy efficiency, raising it to class A+ Specifications: Operation with a mixture composed of up to 20% hydrogen New single coil stainless steel heat exchanger, featuring sections with large water passages for greater seasonal thermal efficiency Seasonal energy efficiency of 94% thanks to the advanced technology applied Renewed interface with backlit display Easy replacement of conventional boilers thanks to central flue gas outlet Modulation range 1:5 greater efficiency and silence Ø80 double exhaust STANDARD Connection to Ø50 mm rigid and flexible waste pipe: solutions for the rehabilitation of flues total length (exhaust + intake) 40 meters Connection to pressurized collective flues Boilers running on methane that can be converted to LPG and propane by means of a specific regulation (conversion kit not necessary) Compact dimensions: 700x395x285 mm Class A+ for Luna Classic 24/28 models with Baxi Mago and external probe (as accessories) New hydraulic group that guarantees maximum levels of performance and durability over time Optimal insulation for silent operation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ARISTON GAS BOILER model CLAS X 28 CF METHANE Low NOx OPEN CHAMBER Technical features. Product code: 3301314 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency B XL withdrawal profile Technical specifications Rated heat input max/min (heating) PCI: 29.5-13kW Nominal heat input max/min (sanitary) PCI: 29.5-13 kW Max/min useful heat output (heating): 26.6-11.6kW Efficiency at nominal heat input PCI: 90.2% Efficiency at 30% of nominal flow rate PCI: 90.3% Max/min heating temperature: 82-35°C DHW max/min temperature: 60-36°C Port. specific in healthcare (10 min. with ΔT=30°C): 13.2 litres/min Quantity of hot water (ΔT=25°C): 15.8 l/min Quantity of hot water (ΔT=35°C): 11.3 l/min Minimum ambient temperature of use: 5°C Supply voltage/frequency V/Hz 230-50 Total absorbed electric power: 52,1W Degree of protection of the electrical system IP X4D Dimensions mm (HxWxD) 745 x 400 x 315 Power supply: methane or LPG Functionality AUTO, Comfort functions Internal, installation in branched collective pipe with natural draft Characteristics LCD display Continuous modulation high efficiency circulator Prepared for Ariston Net connectivity Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Copper finned primary exchanger Cold water inlet and heating return filters Low NOx emissions < 56 mg/kWh Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

PLEASE NOTE! THE BOILER WILL BE SUPPLIED WITH METHANE, THE TRANSFORMATION TO LPG WILL TAKE PLACE THROUGH THE SERVICE CENTER FOR FREE! Select the smoke kit in the drop-down menu! Technical features Model : Thematek Condens Power : 28 kW Gas : Methane or LPG Heating efficiency class: A Sanitary efficiency class: A Sanitary load profile XL Maximum pressure at the burner Natural gas G20 (min/max): 2.10/13 mbar Consumption at (min/max) power Natural gas G20: 1.12/2.8 m3/h Maximum pressure at the LPG G30 burner (min/max): 5.3/32.7 mbar Consumption at (min/max) power Natural gas G30: 0.82/2.05 m3/h Dimensions: (HxWxD): 740x410x310 mm; Weight: 34 Kg Connections: gas Ø3/4” heating Ø3/4” sanitary Ø1/2” Thematek Condens The optimal solution for heating and domestic hot water preparation. Excellent value for money, both for new builds and replacements It can be retrofitted into existing heating and hot water supply systems Heat exchanger in stainless steel The Thematek Condens boiler is available in 24 and 28 kW methane power. The most important novelty concerns the renewed primary exchanger , the old one in Al-Si has been replaced by the one in stainless steel which, through a simple adjustment of the gas valve, also allows operation with propane. Innovation also from the point of view of combustion : complete premixing with new fan-push technology where the fan in the new position upstream of the burner guarantees the right ratio between air and gas by applying a proportional pressure value which guarantees the opening of the gas valve without waste. The project has been developed to offer the optimal solution in terms of price , performance and quality . Thematek Condens also presents a new design of the ultra-compact hydraulic block with a new position of the key components, while still maintaining a good level of efficiency, performance and adequate comfort both in heating and in the production of domestic hot water. Characteristics The new design of Thematek Condens offers an innovative touch screen interface of extreme simplicity with 6 keys, display with black background and 2 white digits with flashing on, the boiler status indication is defined by the flashing on of the icon selected. Thematek Condens is compatible with all Hermann Saunier Duval components and accessories already on the market. Thematek Condens can also be combined with the MiGo WiFi control unit. The wall-mounted boiler is ready to be managed remotely simply with a smartphone. Ease of installation SemiaTek Condens is very simple to install thanks to its small size - 62.6cm high, 40cm wide and 27cm deep - and low weight. Even the vertical hydraulic connections have been designed to facilitate and speed up installation. For these reasons, it is the ideal solution for replacing old systems. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Riello Open Chamber boiler mod. START 28 KI Low NOx - NEW ErP CODE 20151435 Product code: 20151435 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Thermal input: 31.90 kW Thermal power (80-60°C): 28.87 kW Reduced heat input: 14.00 kW Reduced thermal power (80-60°C): 12.36 kW Thermal input: 31.90 kW Reduced heat input: 9.00 kW Reduced thermal power: 7.95 kW Minimum operating pressure: 0.25-0.45 bar Quantity of hot water with Δt 25°C: 16.6 l/min Minimum domestic water flow rate: 2 l/min DHW temperature selection range: 37-60°C Flow regulator: 10 l/min NOx class: 6 Dimensions HxWxD 450x332x740 mm; Weight: 30 Kg Natural gas supply START 24 KI LN (LOW NOx) Start LN is characterized by a modern design despite its essentiality and is ideal for heating and the production of domestic hot water in small and medium-sized domestic users. Start LN is available in power ratings of 24 and 28 kW with low NOx emissions <56 mg/kWh. Characteristics: Double exchanger: domestic hot water production with plate exchanger for greater resistance to the formation of limescale CTR system for a quicker achievement of the desired comfort and a reduction in consumption, and in the temperature ranges in the heating bodies 8 liter expansion vessel Low consumption circulator (IEE≤0.20) Antifreeze function which protects the heating and DHW circuits down to 0°C Standard thermoregulation on the boiler board in combination with the external probe (optional) Can be interfaced with the Remote Control Panel Hydraulic connections available as an accessory kit Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service Electrical protection degree IP X5D Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: THE CURVE AND THE PIPE FOR THE COAXIAL KIT MUST BE PURCHASED SEPARATELY Rinnai Condensing Boiler Momiji 29 kW Complete with Fume Exhaust Kit with Integrated Wi-Fi Chronothermostat Low NOx Methane REB-KAI2529FF Code RREB-KAI2529FF Heating energy class A XL load profile Nominal thermal power kW 24 EN677 efficiency on PCI (80-60°C) % 96.1 Nominal power modulation (80-60°C) Heating kW 8.2 - 23.8 NOx class 6 Maximum electric power absorbed in heating W 98 Electrical power in stand-by W < 3 Supply voltage V/Hz 230 / 50 Degree of protection IPX5D Domestic hot water delivery (ΔT=35°C) l/min 11.6 Domestic hot water delivery (ΔT=25°C) l/min 16.3 Dimensions (H x W x D) (mm)660x440x285 MOMIJI The warm embrace of autumn MOMIJI are the red maple trees typical of the Orient, whose leaves color autumn red, a season that the Japanese experience as "comfort". Thanks to the mild climate and temperatures that are once again welcoming (no longer the torrid heat of summer, not yet the freezing climate of winter), taking time out is even more pleasant. Enjoying your home, as well as the foliage, gives well-being. Momiji best interprets the combination of traditional systems and condensing technology. In fact, while integrating perfectly with different systems, it is designed to optimize the condensation technology on radiator systems, responding concretely to the needs for savings and eco-sustainability of this type of heating, extremely widespread but often unable to fully exploit the advantages of condensation. The heating is smart Momiji offers the standard Wi-Fi chronothermostat (which can also be installed in a room other than that of the generator) to manage and control the boiler anytime, anywhere, in complete freedom. Consumption reports, weekly programming, modification of settings and management of multiple boilers (such as one's own and that of elderly parents, or the house in the mountains) from the same "My Rinnai" APP, available for Android and iOS smartphones. All this and much more to offer you totally smart management. The integrated climatic probe is a standard of Rinnai heat generators: the internal positioning allows you, who use it and you who install it, to avoid masonry work and electrical connections. Thanks to this sensor, you can forget about regulating the temperature in your home and let the generator take care of everything, intelligently adjusting its operation according to the weather, more or less cold. So while the boiler operates in climatic regulation with sliding temperature, you can enjoy a perfect balance between comfort and savings, and no worries. Momiji Comfort has never been easier Easy, everywhere Like the Rinnai Infinity water heaters, the Momiji boilers are also specifically designed to facilitate the installer's work. The device is small, light and compact. It is ready to use and does not need to be configured. The flue system is split Ø80/80 and, thanks to the high prevalence of the fan, it is possible to reach up to 30 equivalent linear metres. Thermal exchange Momiji has a copper heat exchange, with a large passage section: this facilitates integration into existing radiator systems and simplifies cleaning operations. This range of boilers is the perfect solution for often imperfect traditional systems. Can also be installed outdoors Momiji is IPX5D certified and has the standard antifreeze kit up to -20°C. Thanks to these characteristics, it can also be installed outdoors without the need for additional protection Integrated condensate neutraliser The Momiji series features the condensate siphon integrated inside the generator, already added with granulate and immediately ready for use. This allows you to simplify installation, always, even when replacing a traditional high temperature generator. The integrated neutralizer, in fact, allows you to eliminate the acidity of the condensate (acidic pH water produced by the normal operation of the heat generator, corrosive for the pipes) without having to face the costs of purchasing and maintaining an external accessory that performs this function otherwise essential. Product Warranty: The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA ASSISTANCE SERVICE IN ADVANCE Overview JUNKERS CERAPUR BALCONY ZWB 28-1 EB CONDENSING BOILER for outdoor use COMPLETE WITH FUME KIT - NEW ErP 2016: Wall mounted condensing outdoor boiler with DHW production, combinable with solar thermal systems for DHW using Solar Kit.. Technical specifications Heating and DHW energy efficiency class (ErP): A/A For heating and domestic hot waterÿ Loaded profiles declared XL Nominal heat input (heating): 24.6 kW Nominal thermal power (sanitary): 28 kW Nominal heat input (sanitary): 28.6 kW Thermal efficiency at nominal power 40/30°C: 104.3% Efficiency thermal useful at 30% nominal load 40/30°C: 109.2% Continuous sanitary production: 13.4 l/min Sanitary temperature range that can be set: 40/60°C NOx class: 5 Absorbed electric power: 230 W Degrees of protection: IP X5D Dimensions (D x W x H):ÿ285 x 535 x 775ÿmm; 54kg Version:ÿLPGÿ Main features CERAPUR BALCONY Wall-mounted condensing boiler for outdoor use with DHW production, which can be combined with solar thermal systems for DHW using the Solar Kit. Small and compact,ÿCERAPURÿBALCONY has been designed to solve space problems and resist bad weather, while ensuring maximum comfort in the production of heat and domestic hot water. Advantages: Wall-mounted condensing boilers for outdoor use with DHW production, which can be combined with solar thermal systems for DHW using the Solar Kit. Certifications achieved of tipC13, C33, C63, C83, B33. Suitable for use with 60 mm drains. Class 5 emissions required by UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation. We will remotely control the digital room chronothermostat with the following functions: two fixed heating programs P1 and P2; a programmable P3 heating program with 22 available time slots; setting of the operating temperatures both in heating and in DHW; display of boiler operating status and any anomalies; in combination with the external probe (accessory) the functioning as a climatic control unit is activated which automatically regulates the delivery temperature according to the external temperature. Automatic antifreeze function up to an external temperature of -15°C, on both the sanitary and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (DHW heating). Primary heat exchanger in patented high efficiency aluminosilica alloy. Domestic hot plate heat exchanger for condensing also in DHW. 6 liter heating expansion tanks. Circulator in Energy Class A. The ErP legislation and the new energy labels The future of heating systems Starting fromÿ26 September 2015ÿthe heating systems and for the production of hot water, in order to be placed on the market, will have to comply with theÿErPÿ (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiencyÿ of appliances, favoring comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and the production of domestic hot water. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding underperforming technologies from the market. The energy labelÿwill be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to better understand the characteristics of the system, acquire greater awareness of energy saving, allow him to choose better what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements.ÿ In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing for an increase in the score attributed to each appliance and increasing the energy class of the system: therefore, the task of whoever builds/installs the system is to provide the consumer with the correct explanatory label . The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on consumption in the home, approximately 80% of which is due to heating and the production of hot water, and are currently incentivized at the tax level. Junkers Boschÿ already in line with the dictates of the ErP legislation, represent a future that has always distinguished the brand. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

IMMERGAS VICTRIX EXA 28 KW CONDENSING ERP COMPLETE WITH FUME EXHAUST KIT Technical features Immergas Victrix Exa 28 kW boiler Capacity: 28Kw Useful heating power kW: 28, DHW useful power kW: 32.0 Type: Instant Modulation range: 25 - 100% Hot water production (∆t 30 °C) l/min: 15.3 Electrical protection degree IPX: 5D Dimensions (HxWxD) mm: 763 x 440 x 300 ; 42kg VICTRIX EXA With VICTRIX EXA comes a generation of condensing boilers that offers all the advantages of condensation in maximum simplicity and economy. Designed to comply with the new European Directives ErP and ELD, it makes it easier to reach the high efficiency classes in space heating and in the production of domestic hot water in homes. The condensing module is in stainless steel and the circulator is low consumption. The modulation range of the appliance goes from 23 to 100% of the thermal power. The user interface is simple to use, it is equipped with adjustment knobs, selection buttons and an LCD display which shows the operating status and any error codes. VICTRIX EXA can also be managed from smartphones, tablets and laptops (the DOMINUS App will be available from January 2016). The casing covering the water connections is standard, to better set up the boiler inside domestic spaces. Approved to operate indoors or outdoors in a partially protected place thanks to the IPX5D degree of electrical protection, the boiler is equipped with standard frost protection down to -5 °C. VICTRIX EXA can also be used in GAUDIUM SOLAR BASE ErP systems. With low emissions of carbon monoxide (CO) and nitrogen oxides (NOX), VICTRIX EXA falls into class 5, the most ecological envisaged by European standards (UNI 297 and 483). The VICTRIX EXA range offers all the advantages of condensation in maximum simplicity and economy. The most compatible technology with the new European Directives and with the aim of reducing energy consumption, is presented in the most economical and effective way for many new installations and replacements of existing appliances. The VICTRIX EXA are two instantaneous boilers of 24 and 28 kW, capable of making a consistent contribution to raising the energy efficiency class in space heating and in the production of domestic hot water. Wall installation is easy both indoors and outdoors and the VICTRIX EXA range also offers the possibility of operating with propane air by choosing the dedicated conversion kit. The condensing module is in stainless steel and the circulator is low consumption, all made more comfortable and easy to install thanks to the compact dimensions. The user interface is simple to use, it features adjustment knobs, selection buttons and an LCD display which shows the operating status and any error codes. The lower casing to cover the connection pipes is standard, while the connection group is optional for all models SIMPLICITY OF CONTROLS The boiler also features an advanced and easy-to-use user interface with LCD display, selection buttons and adjustment knobs. The latter allow you to make temperature adjustments quickly and easily. ECOLOGICAL BOILER VICTRIX EXA has low emissions of carbon monoxide (CO) and nitrogen oxides (NOx) such as to be included in class 5, the most ecological in the classification established by the European standards UNI EN 297 and UNI EN 483. They can therefore discharge through the wall in the cases provided for by Legislative Decree 102 of 4 July 2014. CLASS A CIRCULATOR The low-consumption circulator allows considerable savings in electricity compared to a traditional circulator and adjusts its consumption according to the variations in the hydraulic flow rate of the system, for example in the presence of thermostatic valves or zone valves. LOW ELECTRICITY CONSUMPTION IN STAND-BY (LESS THAN 6 W)   IMMERGAS IS READY TO DO ITS PART FOR THE ENVIRONMENT! It is a very important directive established by the European Union and at the same time a decisive road that will lead all of Europe to reduce pollution and improve citizens' lives. The ErP directive (2009/125/EC) - the acronym stands for "Energy Related Products" - in fact sets very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements for energy and environmental performance for instruments that consume energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central purposes of the legislation: INCREASE THE ENERGY EFFICIENCY OF ENERGY USING MACHINES BY 20% REDUCE EMISSIONS OF CARBON DIOXIDE (CO2 ) INTO THE ATMOSPHERE BY 20% REACH A PERCENTAGE OF RENEWABLE ENERGY ON THE FINAL CONSUMPTION OF 20% Two dates in particular have been established to dictate the timing of the adjustment. From 1 AUGUST 2015 it is mandatory to place appliances equipped with low-consumption circulators on the market. From 26 SEPTEMBER 2015 the ErP and ELD Directives officially come into force with the obligation to place appliances with an energy label on the market. Placing on the market means the first billing by Immergas to the retailer. If the appliance was placed on the market before 1 August/26 September 2015, it can be sold, installed and put into service without time limits. The ErP and ELD provisions are not retroactive ELD DIRECTIVE: EVERYTHING CLEAR ON THE LABEL The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The Labeling Directive (2010/30/EC) in fact requires that each item subject to the ErP Directive be equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power . IMMERGAS PARTICIPATES IN THESE ADJUSTMENTS WITH PARTICULAR CONVICTION, AWARE THAT ONLY A MARKET THAT ENCOURAGES HIGHER ENERGY EFFICIENCY TECHNOLOGIES CAN BE RESPECTFUL FOR THE ENVIRONMENT. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase and provides only for the supply of spare parts.

Read more less

IMMERGAS VICTRIX 28 TT METHANE CONDENSING GAS BOILER Immergas Victrix 28 TT condensing boiler Capacity: 28Kw Useful heating power kW: 24.0 DHW useful power kW: 28.0 Type: snapshot Modulation range: 11 - 100 % Hot water production (∆t 30 °C) l/min: 13.4 Electrical protection degree IPX: 5D Power supply: LPG *For conversion to LPG, contact the Authorized Assistance Centre VICTRIX TT The VICTRIX TT ErP range, intended for new installations and above all for the replacement of existing appliances, has been designed to comply with the new European Directives on the use of energy, increasingly oriented towards condensing technology to more easily reach the efficiency classes high in space heating and in the production of domestic hot water in homes. VICTRIX TT ErP, produced in the new highly automated lines of the company's historic headquarters in Brescello, incorporates the innovative condensing module which guarantees high flow rate and head on the heating circuit, low risk of clogging due to any impurities in the system and greater corrosion resistance thanks to the special alloy with which it is made. Reduced consumption thanks to the class A circulator and boiler power modulation up to 15%: ideal condition for mid-seasons or reduced loads. In addition to a very low environmental impact, the boiler features an advanced and easy-to-use user interface with adjustment knobs, selection buttons and LCD display for viewing operating temperatures, operating status and error codes. HIGH HYDRAULIC PERFORMANCE The condensing module has been designed to have large water passages which allow interesting flow rate and head performance even on old heating systems. This also means a low risk of clogging in the presence of impurities in the system water. It is made of a special Aluminium-Silicon-Magnesium alloy, a material which – together with the high thicknesses used – is particularly resistant to corrosion. The water circuit runs through the exchanger in an ascending manner, in counter-current with respect to the flame. The dense pinning allows you to increase the exchange surface ensuring excellent water yield. It is important to keep the pH of the heating system filling water between 6.5 and 8.5 with a hardness of 15°F (ref. UNI 8065 - DI 26/06/15). CLASS A CIRCULATOR The low-consumption modulating circulator guarantees considerable savings in electricity compared to a traditional circulator, it can be set in Auto or Fixed operating modes. WIDE MODULATION RANGE The electronic card reduces operating costs thanks to particularly high yields even with low energy absorption, as occurs for example in the mid-seasons. In fact, the wide range of modulation of the appliance (from 15% to 100% of the thermal power) determines high seasonal yields. LOW ELECTRICITY CONSUMPTION IN STAND-BY (LESS THAN 6 W) EVOLVED DESIGN The VICTRIX TT ErP range is designed to make the work of professionals easier. Immergas has invested significant resources for the industrialization of the parts of the appliance, making it particularly robust and has paid the utmost attention to details and finishes. VICTRIX TT ErP presents new technical features such as: • safety valve drain conveyed to the condensate drain • removable cover for direct access to the electrical connection compartment • cover casing for the water connections to better position the boiler in domestic spaces DIRECT ACCESSIBILITY TO THE ELECTRICAL CONNECTIONS COMPARTMENT In the lower part of the boiler there is a connection compartment accessible without the need to open the product but simply by removing the aesthetic cover, to house the electrical connections of the main devices that can be combined (for example CARV2, external probe, CRONO 7). ELECTRONIC AIR/GAS CONTROL The electronic gas valve allows air/gas control by means of a multifunction electrode placed inside the combustion chamber; the car electronic card adapts the combustion parameters in the event of variations in the density of the air or of the fuel. This allows VICTRIX TT ErP to be powered with any type of fuel (methane/LPG or propane air), by intervening only on the electronic board software even at a later time (for example at the first commissioning by the Authorized Assistance Centre). The boiler is therefore supplied with a single product code. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase and provides only for the supply of spare parts.

Read more less

NB: THE PRODUCT IS AVAILABLE ON ORDER. ATTENTION THE BOILER IS EQUIPPED WITH AUTOMATIC COMBUSTION CONTROL. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Baxi Luna Air 28 kw built-in boiler complete with Fumi-new ErP Methane or LPG exhaust kit Cod.A7736262 Technical features: Sanitary nominal thermal power: 28 kW Heating nominal heat input: 24 kW Useful efficiency (pci) PN – average temperature 70°C: 97.7% Nominal efficiency 50/30°C: 105.8% Seasonal space heating energy efficiency class: A Seasonal energy efficiency class of the sanitary fixture: A Water heating - Load profile: XL NOx class 6 according to EN 15502 Emission of nitrogen oxides NOx 15 mg/kWh Electronic ignition with flame ionization control Degree of protection: IPX5D Primary water/gas coil exchanger in AISI 316L stainless steel Secondary water/water exchanger in oversized stainless steel Electric 3-way diverter valve Modulating fan with electronic speed variation Automatic by-pass on the heating circuit Dimensions (boiler) hxwxd: 770 x 470 x 238 mm Dimensions (case) hxwxd: 1170 x 600 x 240 mm MOON AIR Luna Air is the new range of condensing boilers ideal for outdoor installations. remote digital control panel with LCD display as standard suspended installation in partially protected places open-air suspended installation with cover kit, available as an accessory minimum operating temperature: -15°C antifreeze function and IPX5D protection degree wide modulation range 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control built-in installation: the ultra-compact dimensions of the boiler, 770x470x238 mm, allow it to be installed in the majority of boxes on the market; recessed telescopic fittings kit available as an accessory predisposition for combination with the Baxi integrated solar system connection to Ø50 mm rigid and flexible drain pipe - for mod. 24 kW total length (exhaust+intake) 40 metres: solution for renovating flues and in case of replacement of a natural draft boiler with a condensing boiler With Luna Air it is possible to create three different installations: suspended installation in partially protected places; open-air wall-hung installation with cover kit; recessed installation with containment box Product Guarantee : All products for sale on our site are new and packed. The warranty on this product is 24 months from the date of purchase

Read more less

ATTENTION ! In case of immediate lack of availability, the product will be ordered and shipped within 10 working days Technical features Model: D2CND028A0AA Heating Efficiency class (55°C) : A Fireplace power (Qn) : 4.8 - 27 kW Rated Power (80°/60°C) : 4.6 ~ 26.3 kW Rated Power (50°/30°C) : 5.2 ~ 28.2 kW Heating efficiency : Up to 108.7% Modulation range : 1:4 Expansion vessel volume: 10 litres Domestic hot water Efficiency class : A Withdrawal profile : XL Temperature range : 35°C ~ 60°C Withdrawal in continuous service (∆T=30°C): 14 l/min Withdrawal in continuous service (∆T=25°C): 16.8 l/min Pressure of the water network: 0.5 ~ 10 Bar Technical data Power supply (V,Hz, Ø) : 220~240/50/1 Electric Power Input: 3.5~86W Sound power : 49 dB(A) Sound pressure : 39 dB(A) Electrical protection class : IP X5D NOx class : 6 Installation data Flue diameter: 60/100 mm Maximum length for flue system DN 60/100 : 7.6 m Maximum length for flue system DN 80/125 : 34.4 m Maximum length for flue system DN 80/80 : 54 m Dimensions and weight Dimensions (HxWxD): 695x440x295 mm Weight kg 37 Simply Serene Guarantee To guarantee you maximum serenity, DAIKIN has studied "SIMPLY SERENIOUS", an extension of the guarantee up to the 5th year of life of your product, which provides for the subscription of a Scheduled Maintenance Plan with specialized Daikin technicians Ultra-compact Daikin D2C condensing boilers for heating and DHW production Why choose a condensing boiler? Daikin condensing boilers are a good solution for those wishing to replace an existing boiler with a more efficient alternative, saving on costs. Our portfolio includes boilers for every need, from the D2C and Full condens and Full Condens TOP wall-hung boilers, to the GCU boiler with built-in thermal storage, to the A2 floor-standing diesel boiler Thanks to the special Daikin-patented exchanger, the D2CND boiler obtains high specific power and high partialization to guarantee comfort and efficiency in any operating mode and in minimum encumbrance. The D2T version, heating only, integrates a diverter valve and can be connected directly to a storage tank for the production of domestic hot water. Ultra-compact and elegant technology The beautifully compact boiler The new D2C condensing boilers are 100% Daikin design. The ultra-compact dimensions make them suitable for even the smallest apartments, where every centimeter saved is space gained A boiler for every need D2C boilers are available in 3 combi versions 24, 28 and 35 kW for heating and instant domestic hot water production. A wide range of heating-only boilers is also available, the D2T, in 5 sizes, from 12 to 35 kW, which can be combined with a storage tank for the production of domestic hot water. You can install them virtually anywhere thanks to their compact size and minimal installation space required. Thanks to the IPX5D degree of electrical protection and the antifreeze kit, they can also be installed outdoors. Do you want to have your heating system under control even when you are not at home? Pair the Lan Adapter to control via APP ! Efficiency and respect for the environment The combustion system with regulation via Lambda Gx probe automatically adapts to the quality of the gas used, methane or LPG, always guaranteeing clean combustion and minimum polluting emissions . Maximum comfort Thanks to a high modulation ratio, up to 1:8 , the output power is automatically varied to always adapt, instant by instant, to the real need of the house in which it is installed. Endless showers? Domestic hot water will no longer be a problem with the D2C boiler with a DHW flow rate of up to 19 l/min in the 35 kW version Cutting-edge technology combines with an attractive and user-friendly user interface Daikin Eye An elegant luminous eye which, thanks to a multi-chromatic LED, signals the operating status of the appliance. In the event of a fault, the LED turns red and the error code is displayed. The easiest way to interact with your boiler! Daikin Heating Online Controller The heating system is always under control, wherever you are! Thanks to the Daikin Heating Online Controller application you can now control and monitor your boiler from the comfort of your smartphone in a simple and intuitive way Monitor The status of your heating system The ambient temperature in your home Energy consumption graphs. Plan The temperature of your home and the operation of the boiler with up to 6 actions per day for 7 days Vacation mode Check it out The operating mode and the set room temperature The system and the production of domestic hot water By integrating third-party products and services through IFTTT services (if this then that) Changing your old boiler has never been easier! Thanks to its small size and IPX5D degree of protection, Daikin D2C can be installed practically anywhere. Its ultra-compact dimensions make it suitable for even the smallest apartments, where every centimeter saved is space gained and its elegant shapes look good in the kitchen. A distinctive element of the 100% Daikin design is also the Daikin Eye: an elegant luminous eye which, thanks to a multi-chromatic LED, signals the operating status of the appliance. Daikin D2C contains the best of condensing technology. The SCOT combustion regulation system automatically adapts to the quality of the gas used, methane or LPG, always guaranteeing clean combustion and minimum polluting emissions. Dimensions and weight reduced to a minimum are possible thanks to the innovative Daikin patented high specific capacity air/fume exchanger body. Heart of the new D2C boiler, it has been designed to obtain the highest thermal power in the smallest size. Functions Eco Mode Return temperature control to optimize condensation Warm start DHW exchanger already heated and ready for use thanks to the memorization of the habits which allows to anticipate the request for domestic hot water Solar connection If the water entering the boiler has been preheated by the solar system, the burner does not ignite, for optimal integration of the solar source Exclusive initiative for Daikin customers On the occasion of the launch of the new Daikin D2C, starting from 1 March 2017 Daikin is giving away the activation cost of Simply Serene. The offer is valid for all those who will purchase a Daikin boiler of any type and who already own a Daikin mono split or multisplit. All the details on daikin.it. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less