Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Seasonal heating efficiency % 94       Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 20/25 kW Heating nominal heat output: 19.64 kW Efficiency at rated power: 98.2% Efficiency at reduced load (30%): 103.4% Max electric power heating Watt 80 Electrical protection degree IP X5D Expansion vessel capacity 8 litres Quantity of hot water with Δt=25°C: 14 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 780x400x365 ; 38kg METHANE power supply Legend: C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control) Mynute Green E - ErP   System energy class A+ (in combination with external probe and Rec 08 remote panel) Heating energy class A Energy class of the sanitary A New condensing exchanger Modulation 1:5 Flex low consumption circulator (IEE≤0.20) Ducting with flue Ø 50 mm  The new Mynute Green E range is designed following the ecodesign indications provided for by the European ErP Directive and is made up of two combined models and a heating only model. The combined versions have a thermal capacity of 20-25 kW and 25-30 kW, values ​​which refer respectively to heating and DHW; similarly, the heating only version has a thermal capacity of 25-30 kW. The range offers as standard the new front access condensing exchanger with improved efficiency (94% seasonal efficiency), the low consumption modulating circulator, the predisposition for the clapet kit (optional) to be used for pressurized flues and the high pressure fan. prevalence to be able to carry out the ducting of flues with Ø 60 or Ø 50 exhausts. Mynute Green E: high energy efficiency, low gas consumption and low emissions. The entry into force of the European Directive ErP (26.09.2015) provides that even generators for the production of heating and domestic hot water are classified through the appropriate energy label indicating the class. Compulsory labeling provides greater transparency on the characteristics of the products which can be easily compared, helping the user to find those with greater efficiency. Consequently, even with boilers it will be easier to contribute to the achievement of the "20-20-20" objective set for the year 2020 which consists of: reducing greenhouse gas emissions (CO2 ) by 20%, increasing by 20 % use of renewable energies and reduce energy consumption by 20% in EU countries. The new Beretta condenser exchanger with front access The Mynute Green E boiler is equipped with the new Beretta condensing exchanger with front access. An innovative system of guides allows it to move like a drawer, making disassembly for cleaning required by current regulations much faster. Continuous research has allowed Beretta to obtain an exchanger characterized by a considerable increase in performance: 94% average seasonal efficiency calculated according to the European ErP Directive. The exchanger comes from a single aluminum tube, without welding thanks to an innovative production process. The high thermal conductivity of aluminium, much higher than that of steel, allows for greater uniformity in temperature distribution. The single pipe architecture (series circuit) allows for a large section for the passage of water with the advantage of reducing pressure drops and preventing the deposit of impurities, keeping the exchanger performing over time. With the new Beretta condensing exchanger, boiler performance improves up to an average seasonal efficiency of 94%. Mynute Green E, the elegant The new Mynute Green E is characterized by a particularly elegant aesthetic and is equipped with a simple and intuitive digital display which makes information on the status of the appliance immediately usable. The modern ergonomic knobs allow you to easily select all the functions necessary for using and setting the boiler. Flex modulating circulators: optimized performance, low consumption Mynute Green E uses a synchronous modulating circulator with low energy consumption, as required by the European ErP Directive. Thanks to this new technology, the electric motor of the circulator offers an Energy Effi ciency Index of less than 0.20, which means significantly reduced electricity consumption. The new circulator works proportionally to the power supplied by the boiler, thus contributing to a further reduction in electricity consumption. In case of need on the heating system, it is possible to change the head without having to replace the standard circulator with a high head one, the name “Flex” derives from this feature. Up to 49 meters of ducting With Mynute Green E it is possible to comfortably intubate even the most "difficult" flues thanks to the approval for flue Ø 50mm. The main 50mm flue ducts are available in the Beretta price list catalogue, while the boiler manuals provide indications of the maximum length, which differ according to the boiler power. Characteristics: MYNUTE GREEN E + external probe + REC 08 remote control forms a class A+ system Designed according to the ecodesign indications provided for by the European ErP Directive Energy Class > heating (class A) > DHW profile XL (class A) Seasonal heating efficiency 94% Low polluting emissions: class 5 (UNI EN 483) New high-flow aluminum condensing exchanger with front access Standard thermoregulation (optional external probe) ErP boilers with low consumption modulating circulator (EEI0.20) modifiable up to 7m head Hydraulic connections cover (optional) Possibility of intubating flues with the special flue ø 60 in PP and ø 50 in PP (only ErP boilers) Template, plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres   Beretta is “ERP”. The concrete commitment towards an eco-sustainable future   The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations issued at the same time for the energy labeling of products to supplement the corresponding Directive 2010/30/EU will also become effective.  The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands.   In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual devices. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency.   Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ARISTON GENUS PREMIUM EVO EXT 25 EU CONDENSING BOILER COMPLETE WITH LPG- ErP FUME KIT Technical features Product code: 3300735 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 22/2.5 Max/min heating thermal power (80°C-60°C) kW 21.5/2.4 Efficiency at nominal heat input (60/80°C) % 97.8 Efficiency at nominal heat input (30/50°C) % 106.2 Efficiency at 30% at 30°C % 109 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 20/ 45 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 12.2 Quantity of hot water ∆T=25°C litres/min 14.6 Quantity of hot water ∆T=35°C litres/min 10.4 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 70 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 770/505/240 Extremely small dimensions to adapt to any space problem. LPG power supply Ariston condensing boilers Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. EVO: energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the energy certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy. Genus Premium Evo EXT Genus Premium Evo EXT is the wall-mounted condensing boiler designed for outdoor installation. Thanks to its small size and low weight, installation is extremely simple. This without giving up the safety that distinguishes Ariston, i.e. exceptional resistance to cold (up to -15°C) and electrical protection from water and dust that reaches the highest levels (IPX5D classification). High efficiency product with reduced consumption thanks to the 1:10 modulation ratio and the high efficiency circulator with continuous modulation. characteristics: Wall mounted condensing boiler for outdoors with auto function Sensys system manager with integrated time programming Continuous modulation high efficiency circulator Electro-galvanized casing for outdoors Possibility of outdoor installation thanks to all weather protection systems. Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort External probe integrated in the boiler Semi-automatic filling Anti-freeze, anti-limescale and anti-blocking circulator protection Isothermal primary heat exchanger in stainless steel Increased sanitary exchanger Cold water inlet and heating return filters Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Genus Premium Evo EXT thanks also to the high modulation ratio 1:10, the continuously modulating pump and the presence of side sound-absorbing panels. High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available In case of unavailability, the new DIVATECH D LNC 24 model will be supplied Technical features Model : Divaproject C24 Power supply: LPG Performance Energy efficiency class in heating: C DHW energy efficiency class: A Heating nominal heat output : 7.0 ~ 23.5 kW Heat output : 8.3 ~ 25.8 kW Domestic useful thermal power: 23.5 kW Efficiency : 91 % Maximum production of domestic hot water Δt 25°C : 13.4 l/min Maximum production of domestic hot water Δt 30°C : 11.2 l/min Dimensions and weight Dimensions (HxWxD): 700x400x330 mm Empty weight: 27.0 kg Ferroli Divaproject Boiler Wall mounted boilers with instantaneous DHW production with double exchanger, open chamber, natural draft The Divaproject c24 by Ferroli is the cheapest solution for replacing open chamber boilers. Built to be installed outdoors in partially protected places and prepared for integration with a solar panel system. It has an excellent value for money and is entirely Made in Italy with a 2-year guarantee . The cheapest in its category Arrangement for solar systems Eco-comfort system for rapid domestic hot water production High efficiency low consumption circulator (class A) Ideal for residential homes up to 120 m2 2 Year Warranty Divaproject is a heat generator for heating and instant domestic hot water production. The series has been designed in each of its components to have top performance in its category while maintaining characteristics of simplicity and compactness. The control electronics allow for easy and functional combination with solar collector systems. The series includes two models: C24 and C30 The boiler is designed to operate on natural gas and LPG or even on propane air by means of a special transformation. The efficiency of Divaproject is the maximum for its category, certified at 3 stars according to the 92/42 EEC Directive for energy classification Components Expansion tank Combustion chamber Copper primary exchanger Atmospheric burner Sanitary exchanger Modulating gas valve Motorized 3-way valve Boiler control Control panel and functions Divaproject's control and management electronics allow the user to customize the operation of the appliance in order to manage environmental comfort according to one's needs. The control panel with the adjustment knobs makes the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive Remote control "ROMEO" timer Divaproject boilers can be combined with a wide range of remote timer controls which allow the appliance to be adjusted and operated remotely. The ROMEO series consists of 4 models, respectively with weekly or daily comfort programming and with the possibility of choosing between wired or wireless connection for both With ROMEO you can: Adjust the heating and DHW temperatures Know the operating status of the boiler View the temperatures inside and outside the house Restart the boiler in case of temporary lockout Program the daily or weekly environmental comfort Activate/deactivate the heating function via the telephone The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings. With solar systems Sun Easy function Divaproject boilers have been designed to be easily inserted in systems made with the most recent technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously controls the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user Comfort and Safety Functions Eco-Comfort function In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Antifreeze function Even in stand-by mode, i.e. in the absence of a heat request, if a water temperature of 5°C is detected, it activates the anti-freeze protection by igniting the burner at minimum power, in order to avoid damage due to freezing. Post-circulation device All models are equipped with this particular timed device which allows, after the burner has been switched off in heating mode, to recover all the heat accumulated due to thermal inertia from the exchanger, transferring it to the radiators and therefore to the rooms to be heated Circulation anti-blocking device After 24 hours of inactivity, the boiler circulator is automatically started for about 5 seconds to prevent it from blocking after a long period of inactivity. Strengths > Compact geometry primary heat exchanger entirely in copper > Instant production of domestic hot water with dedicated plate exchanger > Simple and complete control panel, LED user interface > High efficiency low consumption circulator (ErP - Class A) with anti-blocking system > Combustion chamber in anti-corrosion aluminized sheet, internally insulated with ecological fiber and burner in AISI 304 stainless steel > Can be combined with the modulating remote timer control > Casing painted white by anaphoresis with epoxy powders > Compact dimensions and low weight > Modulating heat input both in heating and in DHW production, managed by an electronic microprocessor board > Adjustable post-circulation after the heating phase > ECO/COMFORT system for rapid production of domestic hot water > Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems > Standard by-pass Product Warranty : The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO START AQUA CONDENS 25 BIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT - NEW Erp: Start Aqua Condens a wall mounted boiler with a 45 liter stainless steel boiler. Technical features Technical specifications : Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 25 kW Heating rated heat output (80ø/60ø): ÿ24.50 kW Heating nominal heat output (50ø/30ø): ÿ26.25 kW Sanitary nominal heat input: 25 kW Sanitary nominal thermal power: ÿ25 kW Energy efficiency (92/42/EEC) ÿ**** Useful efficiency Pn (50ø/30ø): ÿ105% - 108% Useful efficiency 30% (47ø return): 107.1% Sealed chamber, forced draught Quantity of hot water with t 30øC: 141 *** Quantity of water drawn (litres) in 10' with ǽÓ??ÿT = 30øC Dimensions (hxlxp) mm 1005 x 450 x 600 ; 66 kgs Electrical protection degree: IP X5D NOx class: 5 PRODUCT CODE: 20100125 Power supply: LPG General characteristics START AQUA CONDENSING INTERNAL Combined model with 45 liter stainless steel storage tank. Start Aqua Condens is a wall mounted boiler with a 45 liter stainless steel boiler. The Riello heat exchanger made entirely of aluminum guarantees efficiency and durability, high head and reduction of polluting emissions. It is available with 25 kW power. Certification or Range Rated which makes it possible to adjust the nominal power of the boiler to the effective heat requirement of the system. Three speed circulator. Standard thermoregulation on the card in combination with the external probe (optional). Assembly template, hydraulic fittings, power supply cable supplied. Operation on methane as standard with the possibility of conversion to LPG (G31) (accessory), this modification to be carried out by the installer of the technical assistance service. ErP: Energy related Products The new European regulations for heat generators   ErP is the acronym of “ Energy related Products ” (products connected to the use of energy) and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design ("eco-design "). The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water. From the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players. The energy labeling of products for heating and domestic hot water production The regulations issued require that all products intended for heating and/or for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range.   In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate.   This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to builders. Product Guarantee All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE Beretta CIAO AT 29 csi LOW NoX condensing boiler Complete with smoke kit Cod. 20151830 Technical specifications according to ErP directives Model: HELLO AT LOW NOx Sanitary energy efficiency class: A Energy efficiency class in heating: B Load profile: XL Product code 20151830 LPG supply Technical features: Indoor/Outdoor installation Nominal heat input 28 kW Nominal thermal power 26.8 kW Nominal thermal power at partial load (30%) 8.5 kW Useful efficiency at nominal power 86.3% n4 New version NOx < 56 mg/kWh IPX5D electrical protection degree Dimensions Dimensions h/w/d (mm): 780/452/336 HELLO AT new LOW NOx model Hi AT, ideal for replacement in systems with radiators Ciao AT is the innovative condensing boiler specifically designed by Beretta for traditional high temperature systems (radiators and radiators). The boiler is equipped with a heat recovery unit on the fumes and combustion in a sealed chamber; this allows to obtain very high performance in terms of efficiency and therefore a significant energy saving. New burner with low NOx emissions Specific for systems with radiators and radiators (at high temperature) Condensing post exchanger in aluminum alloy Possibility of outdoor installation with antifreeze heater kit (optional) IPX5D electrical protection degree Environmental Self-Regulation System (SARA) Low consumption circulator 6 m (EEI≤0.20) Hydraulic connections cover (optional) Condensate collection neutralizer drawer kit (optional) Template, hydraulic fittings, gas and sanitary taps (optional) High performance and low consumption In the Ciao AT boiler, the water in the primary circuit passes through an additional exchanger, which allows you to recover energy that would otherwise be wasted. This process makes it possible to recover latent heat and therefore to further increase the performance of the boiler. The energy saving offered by a boiler is greater the higher its efficiency: Ciao AT therefore allows you to reduce gas consumption compared to a boiler without an additional exchanger. The management The electronic panel is the interface for managing the boiler. Simple and intuitive, it allows you to adjust the boiler parameters and activate the numerous functions. The liquid crystal display provides information on the status of the device and the diagnostic codes. By turning the knobs, the heating water and domestic hot water temperature can be set easily and intuitively. The panel integrates the Sistema Clima Amico function. Compatible with BeSMART The BeSMART WiFi Comfort Control Panel, optional compatible with Ciao AT, is the remote boiler management device with modulating chronothermostat functions. With the WiFi Box accessory, included in the BeSMART WiFi Comfort Control, it is also possible to manage comfort remotely using Smartphones and Tablets. The BeSMART WiFi control is very simple to install and intuitive to use and allows you to adjust the parameters and activate the many functions on the boiler. A large liquid crystal display shows all important information. Using the buttons on the control, the temperature of the heating water and domestic hot water is set easily and intuitively and the heating time programming is carried out. Outdoor installation Ciao AT is designed to also be installed outdoors in partially protected places thanks to the dedicated accessories (bottom cover kit and top cover kit) and board antifreeze protection down to 0 °C. In colder temperatures it is possible to extend the protection down to -10 °C using the special antifreeze heater kit with which the lower cover is required. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE Energy label specifications according to the European ErP directive   Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal heat input: 25 kW Nominal heat output: 24.38 kW Classification European Directive EEC 92/42: **** Efficiency at rated power: 99.7% Efficiency at reduced load (30%): 109.4% Total electric power: 88W Quantity of hot water with Δt=25°C: 14.3 l/min Dimensions (hxwxd) mm 890x553x275; 44kg Standard antifreeze down to -15°C Standard Built-in antifreeze system (SAI) METHANE power supply Legend: HE (Hi Efficiency) C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control) AG (antifreeze (-15°C). Weather Green E (Hi Efficiency) Beretta boilers offer reliability and excellent technology, such that they can be used in solar thermal systems and in systems with the most recent and innovative technologies. Beretta presents Meteo Green e , the new range of outdoor and built-in condensing boilers designed to offer high energy efficiency. The boiler is in fact equipped with a wide modulation range (1:10), range rated approval, low consumption circulator (class A) with variable speed and all the advantages of the Meteo range.   Condensing exchanger : Designed to provide high performance in compliance with the strictest European directives in terms of energy efficiency and low emissions. The innovative condensing exchanger and the production process have allowed Beretta to file an application for a European Patent (Patent Pending). The exchanger is born in a single aluminum tube and without welding. The high thermal conductivity of aluminum allows for a more uniform distribution of temperature so as not to create overheating points for the benefit of greater durability of the exchanger. Furthermore, aluminum offers a high resistance to corrosion. The single pipe architecture (series circuit) allows to obtain a large section for the passage of water in the exchanger with the advantage of having low pressure drops and preventing both the deposit of limescale and impurities The innovative aluminum condensing exchanger allows you to recover a large part of the heat of the fumes by reducing losses to the chimney, and a large part of the latent heat of condensation of the water vapor present in the fumes, reaching a four-star energy efficiency value (according to European Directive EEC 92 /42). The exchanger is born in a single aluminum tube and without welding.  Modulation 1:10 The range offers a wide range of modulation to respond to real energy needs, while simultaneously offering high reduction of consumption. Beretta realizes this system through a totally pneumatic and therefore safe and reliable model. The electronics in fact act only on the number of revolutions of the fan (inlet air flow rate) without intervening on the injection of the quantity of gas which is automatically aspirated. Beretta therefore introduces a new double distribution mixer: a mechanical damper with a calibrated weight that opens or closes a part of the venturi section in order to divide the modulation range into two stages (smaller section with low air flow or larger section with high air flow rates). Beretta has also developed a specific silencer in the air intake to reduce any resonances generated by the new mixer.   Low consumption modulating circulator (Class A) It reduces electricity consumption by up to 60%, thanks also to self-adaptation in proportion to the power supplied or to operation at constant ΔT. Thanks to the new technology adopted, the electric motor of the circulator offers an Energy Efficiency Index EEI<0.23, which means considerably reduced electricity consumption and already in line with energy saving requests. The new low consumption modulating circulator (class A) offers technologically advanced control and allows a high reduction in consumption thanks also to the modulation in a wide range of flow rates. Comfort Technological innovation combined with advanced electronics allow obtaining the "Three stars" in sanitary comfort: the maximum foreseen by Pr EN 13203. Intelligent Management Meteo Green he is equipped with Easy Climate function (standard temperature control with external probe) and Remote Control Panel (REC07) with Easy Filling function (system filling that can be activated from the remote control), (only csi model).  Characteristics: Modulation 1:10 Low consumption modulating circulator (Class A): self-adaptation in proportion to the power supplied or operation at constant DELTA T, (EEI<0.23) RANGE RATED certification which allows you to adjust the heat input of the boiler to the actual needs of the system Performance 4 STARS according to European Directive EEC 92/42 Efficiency at 100% Pn > 93+2 log Pn according to DL 311/06 Low polluting emissions: class 5 according to UNI EN 483 Patented condensing exchanger (Patent Pending) in aluminum with high flow rate Sanitary comfort 3 STARS: the maximum required by Pr EN 13203 Thermoregulation with standard external probe REC 07 remote control panel as standard Standard antifreeze protection down to -15°C (mod. AG) IPX5D electrical protection degree For gas transformation, contact the Assistance Centres Authorized Beretta technique   Beretta is “ERP”. The concrete commitment towards an eco-sustainable future   The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations simultaneously issued for the energy labeling of products will also become effective in addition to the corresponding Directive 2010/30/EU.  The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands.   In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual devices. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with a nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency.   Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ARISTON GENUS PREMIUM EVO EXT 25 EU CONDENSING COMPLETE WITH METHANE FUME KIT - ErP Product code: 3300735 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 22/2.5 Max/min heating thermal power (80°C-60°C) kW 21.5/2.4 Efficiency at nominal heat input (60/80°C) % 97.8 Efficiency at nominal heat input (30/50°C) % 106.2 Efficiency at 30% at 30°C % 109 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 20/ 45 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 12.2 Quantity of hot water ∆T=25°C litres/min 14.6 Quantity of hot water ∆T=35°C litres/min 10.4 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 70 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 770/505/240 Extremely small dimensions to adapt to any space problem. METHANE power supply Ariston condensing boilers Genus Premium Evo EXT Genus Premium Evo EXT is the wall-mounted condensing boiler designed for outdoor installation. Thanks to its small size and low weight, installation is extremely simple. This without giving up the safety that distinguishes Ariston, i.e. exceptional resistance to cold (up to -15°C) and electrical protection from water and dust that reaches the highest levels (IPX5D classification). High efficiency product with reduced consumption thanks to the 1:10 modulation ratio and the high efficiency circulator with continuous modulation. Wall mounted condensing boiler for outdoors with auto function Sensys system manager with integrated time programming Continuous modulation high efficiency circulator Electro-galvanized casing for outdoors Possibility of outdoor installation thanks to all weather protection systems. Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort External probe integrated in the boiler Semi-automatic filling Anti-freeze, anti-limescale and anti-blocking circulator protection Isothermal primary heat exchanger in stainless steel Increased sanitary exchanger Cold water inlet and heating return filters Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Genus Premium Evo EXT thanks also to the high modulation ratio 1:10, the continuously modulating pump and the presence of side sound-absorbing panels. High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase  

Read more less

RIELLO START AR 25 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT -NEW ErP Product code: 20101168 Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 25 kW Heating nominal heat output: 24.35 kW Sanitary nominal heat input: 25 kW Sanitary nominal thermal power: 25 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn max - Pn min (80°-60°) % 97.4-95.0 Profit return 30% (47th return) % 95.2 Sealed chamber, forced draught Electric power W 123 Quantity of hot water with Δt 25°C: 14.3 l/min Dimensions (hxlxp) mm 780 x 400 x 332 ; 40 Kg Electrical protection degree: IP X5D Power supply: LPG START AR Yield **** Combined models Start AR is the condensing boiler specifically designed to work with high temperatures and therefore with radiator systems; it is specially designed to have a reduced formation of condensate with system return temperatures above 50°C. It is available in powers of 25 and 29 kW. Characteristics: Low consumption circulator (IEE≤0.20) Climatic regulation managed directly by the boiler control unit Assembly template, hydraulic fittings, power supply cable supplied ErP: Energy related Products The new European regulations for heat generators ErP is the acronym of “ Energy related Products ” (products connected to the use of energy) and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design ("eco-design "). The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water. Also from the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players. The energy labeling of products for heating and domestic hot water production The regulations issued require that all products intended for heating and/or for the production of sanitary water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range.   In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate.   This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to builders.   Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER SAUNIER DUVAL THEMAFAST 4 CONDENSING 26 25 kW METHANE COMPLETE WITH FUME EXHAUST KIT - NEW ERP NB: THIS MODEL IS USED EXCLUSIVELY TO CNG, BUT IT CAN BE CONVERTED TO LPG FREE OF CHARGE THROUGH AN AUTHORIZED SAUNIER DUVAL SERVICE CENTER Model: ErP efficiency class in heating/DHW: A/A Sanitary load profile: XL Type: Heating and domestic hot water Combustion chamber: sealed Domestic hot water production technology: AquaspeedFAST® Heating Nominal power P min/max heating 80/60 °C: kW 5.1/24.5 Partial load efficiency 30% 40/30 °C %: 108.4 Sanitary Rated power min/max (60 °C): kW 5.1/25.5 Specific flow rate (∆T=25 K): l/min 15 Continuous flow rate (∆T=30 K): l/min 12 Min/max DHW temperature: 38/60 °C Electrical characteristics Total absorbed electric power: W 137 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (hxwxd): 740 x 418 x 344 mm METHANE version THEMAFAST 4 CONDENSING ThemaFast 4 Condensing boilers can count on the exclusive Aquaspeed FAST® system for the production of domestic hot water combined with condensing technology which ensures immediate and continuous availability of domestic hot water for superior comfort by eliminating unnecessary waiting times. The range includes 3 models of 25.30 kW and 35 kW. Characteristics: Energy classification 4 stars ****(92/42/EEC) with yields up to 109.2%; Sanitary comfort 3 stars ***(EN 13203-1), thanks to the exclusive Aquaspeed FAST® technology with sanitary stainless steel plate heat exchanger and integrated micro-accumulator which allows immediate delivery of hot water thanks to the available reserve. Control panel with backlit digital display, easy to use: the user can easily select the desired functions and temperatures. Solar Easy: all models in the ThemaFast 4 Condensing range are compatible with all solar systems thanks to a series of solar kits. The small dimensions make all ThemaFast 4 Condensing models perfect both for replacement and for installation in newly built systems. Continuous domestic hot water (DHW) production up to 20 l/min Low NOx emissions - class 5 (EN 483) Total premix burner and primary heat exchanger in anti-corrosion stainless steel High efficiency and modulating circulator Heating system antifreeze function Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Beretta CIAO AT 29 csi LOW NoX condensing boiler Complete with smoke kit Cod. 20151830 Technical specifications according to ErP directives Model: HELLO AT LOW NOx Sanitary energy efficiency class: A Energy efficiency class in heating: B Load profile: XL Product code 20151830 Natural gas supply Technical features: Indoor/Outdoor installation Nominal heat input 28 kW Nominal thermal power 26.8 kW Nominal thermal power at partial load (30%) 8.5 kW Useful efficiency at nominal power 86.3% n4 New version NOx < 56 mg/kWh IPX5D electrical protection degree Dimensions Dimensions h/w/d (mm): 780/452/336 NB: THE BOILER IS SUPPLIED WITH METHANE, IT CAN BE CONVERTED TO LPG THROUGH THE AREA ASSISTANCE CENTER HELLO AT new LOW NOx model Hi AT, ideal for replacement in systems with radiators Ciao AT is the innovative condensing boiler specifically designed by Beretta for traditional high temperature systems (radiators and radiators). The boiler is equipped with a heat recovery unit on the fumes and combustion in a sealed chamber; this allows to obtain very high performance in terms of efficiency and therefore a significant energy saving. New burner with low NOx emissions Specific for systems with radiators and radiators (at high temperature) Condensing post exchanger in aluminum alloy Possibility of outdoor installation with antifreeze heater kit (optional) IPX5D electrical protection degree Environmental Self-Regulation System (SARA) Low consumption circulator 6 m (EEI≤0.20) Hydraulic connections cover (optional) Condensate collection neutralizer drawer kit (optional) Template, hydraulic fittings, gas and sanitary taps (optional) High performance and low consumption In the Ciao AT boiler, the water in the primary circuit passes through an additional exchanger, which allows you to recover energy that would otherwise be wasted. This process makes it possible to recover latent heat and therefore to further increase the performance of the boiler. The energy saving offered by a boiler is greater the higher its efficiency: Ciao AT therefore allows you to reduce gas consumption compared to a boiler without an additional exchanger. The management The electronic panel is the interface for managing the boiler. Simple and intuitive, it allows you to adjust the boiler parameters and activate the numerous functions. The liquid crystal display provides information on the status of the device and the diagnostic codes. By turning the knobs, the heating water and domestic hot water temperature can be set easily and intuitively. The panel integrates the Sistema Clima Amico function. Compatible with BeSMART The BeSMART WiFi Comfort Control Panel, optional compatible with Ciao AT, is the remote boiler management device with modulating chronothermostat functions. With the WiFi Box accessory, included in the BeSMART WiFi Comfort Control, it is also possible to manage comfort remotely using Smartphones and Tablets. The BeSMART WiFi control is very simple to install and intuitive to use and allows you to adjust the parameters and activate the many functions on the boiler. A large liquid crystal display shows all important information. Using the buttons on the control, the temperature of the heating water and domestic hot water is set easily and intuitively and the heating time programming is carried out. Outdoor installation Ciao AT is designed to also be installed outdoors in partially protected places thanks to the dedicated accessories (bottom cover kit and top cover kit) and board antifreeze protection down to 0 °C. In colder temperatures it is possible to extend the protection down to -10 °C using the special antifreeze heater kit with which the lower cover is required. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

HERMANN SAUNIER DUVAL SEMIATEK 4 CONDENSING BOILER 25 kW COMPLETE WITH KIT FOR LPG FUME EXHAUST - NEW ERP Model: ErP efficiency class in heating/DHW: A Sanitary load profile: XL Type: Heating and domestic hot water Combustion chamber: sealed Heating Nominal power P min/max heating 80/60 °C: kW 5.3/19.1 Partial load efficiency 30% 40/30 °C %: 108.5 Sanitary Rated power min/max (60 °C): kW 5/25.2 Specific flow rate (∆T=25 K): l/min 14 Continuous flow rate (∆T=30 K): l/min 12 Min/max DHW temperature: 35/60 °C Electrical characteristics Total absorbed electric power: W 105 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (h x w x d): 740 x 418 x 300 mm LPG version SEMIATEK 4 CONDENSING The condensing boilers of the Semiatek 4 Condensing range are characterized by a simple and linear design. The range includes two combined models of 25 and 30 kW. Characteristics: Energy classification **** (92/42/EEC) with yields up to 109.2% Continuous domestic hot water (DHW) production up to 18 l/min Solar Easy: prepared for integration with solar systems Low NOx emissions - class 5 (EN 483) Total premix burner and primary exchanger in anti-corrosion Aluminium-Silicon alloy Automatic high efficiency circulator on 2 speeds Heating system antifreeze function Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO FAMILY AR 25 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP Technical characteristics Product code: 20100508 Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Furnace thermal power (heating) min-max: 8.5÷25.0 kW Useful thermal power (sanitary) min-max: 8.5÷25.0 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 96.2% Profit return 30% (47th return): 95.3% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 14.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 845 x 400 x 332 ; 42 kgs Electrical protection degree: IP X5D NOx class: 2 Power supply: METHANE FAMILY AR Yield **** Combined models for heating and domestic hot water production Family AR is the new generation condensing boiler specifically designed to operate with high temperatures (80°C delivery and 60°C return) and therefore in radiator systems. Family AR contains Altaresa condensing technology in the aesthetics and in the special Family functions. Family AR has an Air/Gas combustion (patented): thanks to the modulating fan, the mixture of air and gas is kept optimal and constant over the entire power range, always maintaining high efficiency. Thanks to the treated aluminum post-exchanger, very high yields up to 102.9% are obtained. The climatic regulation is managed directly by the boiler control unit, via the external probe (accessory), it allows the temperature of the heating system to be suitably adapted to the external climatic conditions. The equipment is completed by anti-freeze systems (down to -3°C), circulator anti-blocking systems, three-way valve, Wellness button and rapid button which reduces the waiting times for domestic hot water. Family AR is available with powers of 25, 29 and 35 kW. Characteristics: Technology, ease of control and management: • Memory key: activates machine intelligence. - sanitary: hot water always ready and without waste, according to the usage habits of the family. - in heating: reduction of home heating times. • Wellness key: maintains hot water delivery at the ideal temperature for the shower (40°C customizable +/- 5°C). • Touch&Go function: directly from the tap, it activates pre-heating for just one water draw. • Intelligent system filling: allows you to fill the system in complete autonomy. Air/gas combustion (patented): optimal mixture of gas and air to obtain high and constant efficiency over the entire power range with efficiency up to 102.9%. Condensing exchanger located downstream of the fan for further recovery of the heat contained in the exhaust fumes. Advantages for installation: Efficiency ★★★★ according to Dir. 92/42/CEE. Low consumption circulator (IEE≤0.20) Climatic regulation managed directly by the boiler control unit Special Family functions: Wellness key, Memory key, Touch&Go function Intelligent system filling Assembly template, hydraulic fittings, power supply cable supplied. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less