THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : EcoTEC Pure VMW 246/7-2 Product code : 0010019985 Power supply: LPG Performance Heating power : 7.5 ~ 24.0 kW Sanitary rated power : 7.0 ~ 28.0 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 5 Performance Stars : ★★★★ Domestic hot water production (ΔT = 30K) 13.5 l/min Domestic hot water temperature adjustment: 35°C ~ 60°C Modulation : 1:4 Expansion vessel capacity: 8 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x335 mm Weight : 30.8Kg Warranty extension to 7 years EcoTEC Pure VMW wall-mounted indoor condensing boiler The simplest that adapts to everyone's needs The new ecoTEC pure design immediately recalls the quality and reliability that characterize Vaillant's DNA. Indoor condensing boiler with Vaillant standard measurements 72 cm high, 44 cm wide and 33 cm deep. ecoTEC pure was designed with the intention of offering the ideal solution for replacing traditional boilers, including those of other brands , thanks to the vertical hydraulic connections, which guarantee great flexibility. A series of connection kits allow the rapid replacement of the atmo-turboBLOCK models. Ease of management thanks to a series of commands and a very simplified display , suitable for all types of customers. Vaillant has identified an innovative solution to prevent freezing of the condensate siphon, the element most sensitive to frost and thanks to the ecoLEVEL accessory it is possible to convey the condensate into the appropriate drains. The boiler features a new high-efficiency pump with high performance , a stainless steel exchanger and an 8-litre expansion vessel. Simply Vaillant Best value for money ecoTEC pure represents the ideal solution for anyone who wants to switch to Vaillant without worries because it is equipped with vertical connections that make installation quick and easy. Vaillant quality guarantees low consumption and good energy efficiency: the boiler is in class A both in heating and in DHW. The pure range consists of a single natural gas model with combined production. One kit allows you to switch to propane and propane air power. The boiler features a new thermo-hydraulic module equipped with a modulating pump to guarantee low electricity consumption while a new stainless steel exchanger and a wide modulation range up to 1:4 guarantee gas savings ecoTEC pure is the range dedicated to the replacement of boilers of other brands, possible thanks to the simplicity of the vertical connections and ease of use. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoTEC pure the easiest way to switch to Vaillant condensing Solution for heating and domestic hot water Complete range of accessories for replacing traditional boilers Reduced consumption thanks to the high efficiency pump Simplicity of management Small size Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Product code: 3310508 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Nominal heat input in heating max/min (Hi) : 23.5/4.5 kW Max/min DHW nominal heat input (Hi) : 23.5/4.5 kW Max/min heating thermal power (80°C-60°C): 23/4.4 kW Efficiency at nominal heat input: 97.7 / 88% Efficiency at 30% of the nominal heat input: 104.3 / 94% Expansion vessel capacity: 8 l Min/max heating temperature (high temperature range) °C 35/82 Min/max heating temperature (low temperature range) °C 25/45 DHW temperature min/max °C 36/60 Instantaneous quantity of hot water ΔT=25°C l/m 13.9 Instantaneous quantity of hot water ΔT=35°C l/m 9.9 Minimum withdrawal of hot water l/m <2 Electrical data: Supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 34 Electrical protection degree IP X5D CX GREEN EU   The compact condensing boiler with aluminum alloy condensing exchanger and with all the necessary requirements to achieve the required standards in terms of energy saving. Operation only methane. Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic water performance: stars **. Flow rate 13.1 litres/minute with ΔT = 25ºC. (24kW) Heating comfort Efficiency up to 108% with energy savings up to 35%. 4-star combustion efficiency in compliance with the EN92/42 standard. Modulation range from 25% to 100% of maximum power. Condensing exchanger in aluminum alloy. Reduced polluting emissions, NOx class 5. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Arrangement for integration into a heating system via the Ebus2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Possibility of managing single-temperature and multi-temperature zones only via Expert Control. Self-diagnosis system by code. LCD display. Comfort of use and installation Possibility of connection with external probe. Compatible with Expert Control, modulating accessories and on/ff. Easier starting: automatic purge function and directly accessible combustion regulation. Energy saving and respect for the environment Up to 20% energy savings in combination with chronothermostat and external probe. 40% reduction in CO 2 emissions **. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA ASSISTANCE SERVICE IN ADVANCE JUNKERS BOSCH CERAPUR BUILT-IN CONDENSING BOILER ZWB 24-1 EI 24 kW INCLUDING FUME KIT - NEW ErP ErP energy class (Heating and DHW) For heating and domestic hot water production Nominal heat input in DHW kW 24.49 Nominal heat output (heating) 40/30 °C: 25.7 kW Nominal heat output (heating) 80/60 °C: 24.0 kW Minimum heat input (sanitary): 7.4 kW Sanitary flow rate ΔT = 30 K: 11.5 l/min NOx class: 5 Voltage v(AC): 230 HZ frequency: 50 Absorbed electric power: 140 W IP Protection Degree: X5D Dimensions: 243 x 533 x 775; 47 kgs Standard: Controllable from home - Management of the boiler directly from inside the home, using the TF 25 remote control , supplied as standard Junkers Bosch With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for equipment that uses energy, including energy efficiency. The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes to the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation also at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year. CerapurRecessed CERAPUR INCASSO is designed for concealed installations and encloses maximum comfort in just 250 mm of depth. Ideal for solving space problems, it does not alter the aesthetic beauty of homes. In fact, CERAPUR INCASSO integrates perfectly into the façade thanks also to the possibility of painting the "shell" with the same color as the wall. Boiler for concealed installations - Space saving inside the home and no aesthetic impact on the outside thanks to the installation in the niche in the wall Controllable from inside the house - Management of the boiler directly from inside the house, using the TF 25 remote control, supplied as standard Robust and reliable - Robustness and reliability of the boiler are guaranteed thanks to the aluminum alloy construction of the primary exchanger Electrical insulation - The boiler has an IPX5D degree of electrical insulation Characteristics: Wall-mounted condensing boilers for outdoor use with DHW production that can be combined with solar thermal systems for DHW using the Solar Kit. C13, C33, C63, C83, B33 type certifications obtained. Suitable for use with Ø 60 mm drains. Class 5 emissions required by UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation indicated in a special niche, dedicated to the built-in Guscio (acc. 978). Automatic antifreeze function up to an external temperature of -15 °C, both on the DHW and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (DHW and heating). Patented high efficiency silicon-aluminum alloy primary heat exchanger. Oversized sanitary plate heat exchanger for condensing also in DHW. Heating side expansion vessel of 6 litres. Circulator in Energy Class A. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA ASSISTANCE SERVICE IN ADVANCE JUNKERS CERAPUR BALCONY ZWB 24-1 EB CONDENSING BOILER for outdoor use COMPLETE WITH FUME KIT - NEW ErP Technical specifications Heating and DHW energy efficiency class (ErP): A/A For heating and domestic hot water production Loaded profiles declared XL Nominal heat input (heating): 24.6 kW Nominal thermal power (sanitary): 24 kW Nominal heat input (sanitary): 24.4 kW Thermal efficiency at nominal power 40/30°C: 104.3% Efficiency thermal useful at 30% nominal load 40/30°C: 109.2% Continuous sanitary production: 11.5 l/min Sanitary temperature range that can be set: 40/60°C NOx class: 5 Absorbed electric power: 140 W Degrees of protection: IP X5D Dimensions (Depth x Width x Height): 285 x 535 x 775 mm; 54kg Version: LPG MAIN FEATURES CERAPUR BALCONY Wall-mounted condensing boiler for outdoor use with DHW production, which can be combined with solar thermal systems for DHW using the Solar Kit. Small and compact, CERAPUR BALCONY has been designed to solve the problems of space, resist bad weather, while ensuring maximum comfort in the production of heat and domestic hot water. Advantages: Wall-mounted condensing boilers for outdoor use with DHW production, which can be combined with solar thermal systems for DHW using the Solar Kit. Certifications achieved of tipC13, C33, C63, C83, B33. Suitable for use with 60 mm drains. Class 5 emissions required by UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation. We will remotely control the digital room chronothermostat with the following functions: two fixed heating programs P1 and P2; a programmable P3 heating program with 22 available time slots; setting of the operating temperatures both in heating and in DHW; display of boiler operating status and any anomalies; in combination with the external probe (accessory) the functioning as a climatic control unit is activated which automatically regulates the delivery temperature according to the external temperature. Automatic antifreeze function up to an external temperature of -15°C, on both the sanitary and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (DHW heating). Primary heat exchanger in patented high efficiency aluminosilica alloy. Domestic hot plate heat exchanger for condensing also in DHW. 6 liter heating expansion tanks. Circulator in Energy Class A. The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of appliances, favoring comparisons. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and the production of domestic hot water. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding underperforming technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent a concrete aid for the consumer, allowing him to better understand the characteristics of the system, acquire greater awareness of energy saving, and allow him to choose better what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing for an increase in the score attributed to each appliance and increasing the energy class of the system: therefore, the task of whoever builds/installs the system is to provide the consumer with the correct explanatory label . The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on consumption in the home, approximately 80% of which is due to heating and the production of hot water, and are currently incentivized at the tax level. Junkers Bosch, already in line with the dictates of the ErP legislation, represent a future that has always distinguished the brand. Warranty: All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Traditional Sealed Chamber Sime Boiler mod. UNIQA REVOLUTION 24 kW LOW NOx complete with fume exhaust kit - ErP Nominal thermal power (80-60°C) kW 22.9 Minimum thermal power (80-60°C) kW 8.9 Nominal heat input in heating kW 24.5 Minimum heat input kW 10.0 Rated power efficiency (80-60°C) % 93.4 Useful efficiency minimum power (80-60°C) % 89.2 Useful efficiency 30% of load % 108.8 Heating energy efficiency class B Sanitary energy efficiency class A Seasonal heating energy efficiency % 86 XL loading sanitary profile Heating sound power dB(A) 54 Maximum electrical power absorbed W 450 Electrical protection degree IP X5D Heating regulation range °C 40÷80 Boiler water content l 3.35 Max working pressure bar 3 Max operating temperature °C 85 Expansion tank capacity l 8 Expansion vessel pressure bar 1 DHW adjustment range °C 10÷60 DHW heat input kW 24.5 Specific sanitary flow rate ∆t 30°C (EN 13203) l/min 10.6 Continuous DHW flow ∆t 25/35°C l/min 12.9/9.2 Sanitary minimum flow rate l/min 2 Sanitary pressure (max/min) bar 7.0/0.5 Smoke temperature max °C 106 Flue gas temperature min °C 75 Maximum straight length ø 60/100* m 2.5 Maximum straight length separated* m 10+10 NOx class 6 (‹ 56 mg/kWh) Weight kg 45 UNIQUE REVOLUTION Instantaneous wall mounted boiler with active recuperator Equipped with active heat pump recovery It does not require a condensate drain It is installed with a traditional flue Specific for the replacement of traditional sealed chamber boilers The boiler is equipped with a card that can perform one of the following functions: remote alarm, zone valve control via room thermostat or remote control, boiler loading, recirculation or booster pump control A UNIQUE, INGENIOUS SOLUTION The European ErP regulation has changed the rules of the game, defining the minimum requirements to be met for products for space heating and domestic hot water production, in order to significantly reduce CO2 emissions by 2020. According to this regulation, traditional boilers (non-condensing) sealed chamber boilers can no longer be placed on the market starting from September 2015. In this scenario, Sime proposes Uniqa Revolution, the class B boiler, which already complies with the polluting limits of September 2018 and is installed like a boiler traditional, because it does not require flue ducting and condensate drainage. Specific for the replacement of traditional sealed chamber boilers It does not require a condensate drain Use traditional flue Equipped with internal heat pump booster THE BOILER THAT SOLVES THE PROBLEM Replacing a traditional boiler with a condensing one can be particularly expensive because it requires the creation of a condensate drain and, in some cases, the ducting of the existing flue, which is not suitable for low temperature fumes. The costs of these interventions are significant and are added to those of the purchase and installation of the generator. Uniqa Revolution is the only product that is installed like a traditional boiler, while meeting the stringent Ecodesign requirements of the ErP legislation. Uniqa Revolution is equipped with an active recuperator (booster) which raises the efficiency in compliance with ErP requirements. The heat transfer fluid receives heat from the air drawn from the outside and conveyed to the 1st active recovery exchanger. Subsequently, the active recovery exchanger compresses the fluid and transfers the heat to the heating system return water in the 2nd active recovery exchanger. The water then passes through the low NOx burner, reheating further and subsequently into the boiler exchanger. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ariston condensing boiler CLAS ONE Wi-Fi 24 kW Complimentary flue gas kit Integrated Wi-Fi low NOx ErP nominal heat input max/min heating PCI kW 22.0 / 3.7 nominal heat input max/min DHW PCI kW 26.0 / 3.7 useful heat output max/min heating PCI kW 21.4 / 3.4 efficiency at nominal heat input (60/80° c) PCI % 97.5 efficiency at nominal heat input (30/50° c) PCI % 107.3 yield at 30% (30th c) PCI % 109.8 max/min heating temperature (high temperature) °C 82 / 35 max/min heating temperature (low temperature) °C 45 / 20 max/min domestic hot water temperature °C 60 / 36 quantity of hot water (deltaT 25°C) l/min 14.5 quantity of hot water (deltaT 35°C) l/min 10.4 specific flow rate (first 10' with deltaT 30°C) l/min 12.1 minimum operating temperature (-5°C with antifreeze kit)* °C > 0° supply voltage/frequency V/Hz 230 / 50 total absorbed electrical power W 77.0 electrical system protection degree IP X5D Energy class A Energy class in sanitary A XL withdrawal profile Dimensions HxWxD 745x400x315 Class One Wi-Fi Functionality: / XtraTech™ heat exchanger in exclusive Ariston stainless steel, with high head / Class A+ in heating reachable with thermoregulation / Modulation ratio 1:8 / Wifi integrated in the boiler /LCD displays / BusBridgeNet® communication protocol / AUTO function, Comfort / Optimized internal silencer / Installation in partially protected places / Smoke outlet 80, 60, 50 mm CLASS ONE WIFI XtraTech™ is the new exclusive* Ariston stainless steel heat exchanger, the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations Always connected with Ariston NET Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone. Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET. Absolute efficiency: Thermoregulation in class A+ The ONE condensing boilers achieve very high seasonal performance and thanks to the thermoregulation they reach class A+! Alteas and Genus ONE are also equipped with the innovative IGNITION system, which makes combustion always perfect thanks to the electronic control. Gas transformation? No problem, from the technical menu in one touch. Total Comfort: Innovative functions to meet your needs ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy. Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: ACTA NOX 24A Heating energy efficiency Class: C Sanitary Energy Efficiency Class: B Withdrawal profile: XL Heating/DHW nominal heat input: 26.0 kW Heating/DHW maximum useful power: 23.7 kW Yield name 60°/80°C: 91.3% Yield at 30% load: 92.6% Energy efficiency stars: (dir 92/42/EEC) ** NOx class: 6 Weighted NOx: 39 mg/kWh Minimum/maximum heating temperature: 38/85 °C Minimum/maximum heating pressure: 0.3/3.0 bar Capacity of the expansion tank (total): 8lt DHW minimum/maximum temperature: 35/60°C Maximum flow rate (ΔT=25 K) / (ΔT=35 K): 13.6 / 9.7 l/min Specific sanitary flow rate (ΔT=30 K): 11.2 l/min Voltage / Power at nominal heat input V~/ W: 230~/56 Degree of protection: IPX4D Minimum/maximum smoke temperature: 71 / 106°C Extremely compact dimensions hxwxd: mm 703x400x325 CNG or LPG power supply ACTA NOX ACTA NOX is the range of Savio boilers designed to meet modern housing needs that require reliable, compact and high performance products. The ACTA NOX range includes open chamber boilers with power ratings of 24 kW and 28 kW . The ACTA NOX series is suitable for heating and domestic hot water production. ACTA NOX has very compact dimensions which make it easy to place in any environment. Characteristics: High yields Primary heat exchanger in copper, high circulation lamellar Sanitary plate heat exchanger in stainless steel Water cooled low NOx burner High efficiency pump with low energy consumption Integration with SAVIO solar systems using a solar kit Digital control panel with display. The electronic card allows you to: Adjust the ignition pressure Adjust the restart frequency Manage the post-circulation of the high efficiency pump View fault diagnostics and lockout status. Also available : Boiler antifreeze safety Primary circuit thermal inertia disposal. Primary exchanger ACTA NOX features a water-cooled burner which allows to achieve high efficiency combustion and to limit the emissions of polluting substances. The burner is therefore characterized by a flame at a lower temperature than traditional boilers, which reduces the production of nitrogen oxides. Even the shape of the flame is specific to the water-cooled burner, in fact, it presents the flame in a uniform manner and with a reduced height. This makes ACTA NOx the SAVIO product that satisfies the needs of maximum domestic comfort and respect for polluting emissions. Secondary exchanger ACTA NOX is available in a mixed version for heating, domestic hot water production: the hot water is supplied at an adjustable and constant temperature thanks to the electronic modulation of the boiler. The DHW exchanger is made of stainless steel and has a low inertia which guarantees excellent performance. Control panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display Display annual periodic maintenance expiry Thermo-hydrometer for reading the water pressure on the primary side. Integration with solar ACTA NOX can be easily combined with a solar system using the Biasi solar kit. Simple and immediate to install, it does not require electrical parts and allows optimizing the integration of the solar system with the boiler which intervenes only when necessary to guarantee the required comfort temperature. Thermoregulation Hydraulic groups of innovative conception: Motorized 3-way valve Integrated automatic by-pass: allows the boiler to adapt to the needs of modern heating systems Absolute heating pressure switch: guarantees protection of the boiler in the event of a lack of water or circulation Sanitary flowmeter Easily accessible filling tap Drain tap Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product code: 3301113 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal heat input max heating kW 22.0 Max DHW nominal heat input kW 26.0 Nominal thermal power kW 21.5 Efficiency at nominal heat input (60/80°C) 97.7% Efficiency at 30% (30°C) 109.8% DHW max/min temperature °C 60 / 36 DHW flow ∆T 25 °C (l/min) 15.4 Power supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 80 Degree of protection of the electrical system IP X5D, Dimensions 24 kW mm (HxWxD) 745 x 400 x 315 Indoor installation and partially protected places Power supply: METHANE Functionality: Room thermostat CUBE S NET 3319126 (optional) Operation CNG, LPG and propane air without the need for kits. The transformation takes place thanks to the combustion control by selecting the type of gas from the technical menu General characteristics ONE Series, the new generation of condensing boilers Serie ONE is the new generation of Ariston condensing boilers, studied down to the smallest detail to guarantee maximum performance for a long time. New XTRATECH™ exchanger: Maximum quality. XtraTech™ is the new exclusive* Ariston stainless steel heat exchanger , the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations. Excellent results, over time. Always connected with Ariston NET (optional) Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone. Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET. Total Comfort: Innovative functions to meet your needs ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy. Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance. GEN ONE Characteristics: New XtraTech™ exchanger in exclusive* Ariston stainless steel, with high head Exchanger passage sections +142% compared to the previous version Large display, touch interface Ignition system, electronic combustion control Gas transformation from the technical menu Class A+ in heating reachable with thermoregulation Modulation ratio 1:10 Ariston NET connectivity in the boiler thanks to the Cube S NET thermostat (optional) BusBridgeNet® communication protocol AUTO function, Comfort New CARE function, automatic reminder of ordinary maintenance Internal sound absorbing panels Installation in partially protected places Fumes discharge 80, 60, 50 m Ecodesign directive: from 2015 only new condensing boilers After very long negotiations, the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing boilers on the market starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will only have to install models condensing. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT BAXI ASSISTANCE IN ADVANCE Baxi Duo-Tec Compact E 24 MAGO kW low NOx condensing boiler complete with methane or LPG fume exhaust kit with integrated maGO thermostat - New Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input kW 24.7 Heating nominal heat input kW 20.6 Seasonal space heating energy efficiency ŋs % 93 Emissions of nitrogen oxides NOx mg/kWh 15 Minimum operating temperature °C -5 Expansion vessel capacity l 7 Heating circuit water temperature adjustment °C 25-80 Domestic hot water production ∆T 25°C (1) l/min 13.8 DHW circuit minimum water flow rate l/min 2 Dimensions (hxlxp) mm 700x400x299 Degree of protection IPX5D DUO-TEC COMPACT E range New design: change the aesthetics, not the performance. Luna Duo-tec E and Duo-tec Compact E: the already well-known Baxi boilers present themselves today with a new aesthetic, increasingly modern and attentive to new design trends, which allows them to be inserted in any living context. The control panel has also been completely renewed and is equipped with a new backlit LCD display that is even clearer and simpler to use thanks to dedicated and independent keys. The new boilers, even more beautiful and modern thanks to the restyling, however keep intact the characteristics that have always distinguished the Duo-tec range: Reliability. Robustness, durability and reliability in performance; Efficiency and savings. The reduction of the on/off cycles translates into considerable benefits in terms of energy savings and lower emissions; Completeness of range. Heating only models, with instantaneous DHW production, and also the compact version with the possibility of outdoor installation. The range has been further enriched with the new models equipped as standard with the modulating chronothermostat with integrated Wi-Fi Baxi Ma go The ideal boiler for new builds and replacements The Duo-tec E range of gas condensing boilers have been specifically designed in compliance with the requirements of the Ecodesign and Labeling Directives, to make them particularly suitable for both new builds and replacement old generator. The energy class, identified by a letter, expresses a range of efficiency values ​​within which the one expressed by the product in question resides. The label was created for the final consumer, so that, through real and comparable data, he can make informed choices by targeting high-efficiency products. Exchanger preheating function The boilers of the Duo-tec E range are equipped with the exchanger pre-heating function which guarantees the immediate production of domestic hot water at the set comfort temperature. In fact, the sanitary water passing through the plates of the preheated exchanger is already supplied at the desired temperature without waiting times. The function can be easily activated/deactivated by a specific boiler parameter Boiler info By pressing the dedicated key , it is possible to view numerous information regarding boiler operation such as: heating system water pressure (electronic pressure transducer present in the hydraulic group); heating flow/return temperature; external temperature (with external probe installed); domestic hot water temperature. Efficiency and savings greater efficiency given by less switching on and off: with a high modulation ratio, the reduction of continuous switching on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions; adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises. Gas Adaptive Control It is an innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic control of combustion to constantly maintain maximum efficiency values. Advantages: there are no manual interventions - reduced measuring, calibration or changing nozzles with this system, the boiler self-adapts to the quality of the gas and the length of the flue gas pipes, keeping efficiency constant the boiler also constantly regulates itself to maintain the maximum efficiency values, favoring a reduction in gas consumption and generating less pollution thanks to the continuous control of emissions Outdoor installation Duo-tec Compact E boilers can be installed outdoors in partially protected places thanks to the new top cover kit and bottom closure kit (available as accessories). In fact, the Duo-tec Compact E range is equipped AS STANDARD with an electronic antifreeze system which guarantees operation down to a temperature of -5 °C: the IPX5D protection also protects the electrical parts from jets of water which may come from all directions. New modern and elegant design for the whole range Wide modulation range 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control Digital control panel with large backlit LCD display New cover kit: possibility of outdoor installation in partially protected places (optional accessory) Rigid and flexible Ø50 mm exhaust pipe connection: solution for restoring flues - for mod. 24 kW total length 40 meters (intake+exhaust) Compact dimensions: 700x400x299 mm hydraulic system Electric three-way diverter valve Pre-mix burner in stainless steel Stainless steel water/fumes exchanger Increased DHW exchanger in stainless steel which allows the boiler to condense even in DHW operation Modulating fan with electronic speed variation Automatic by-pass High efficiency circulation pump with total modulation Pump anti-blocking system and three-way valve which intervenes every 24 hours Heating circuit safety valve at 3 bar Thermoregulation system Standard climate control (with external probe available as an option) Arrangement for connection to a zone system Control system Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch that blocks the gas in the event of a water shortage NTC safety probe against fume overheating Temperature control using NTC probes Total antifreeze device Electronic thermometer Heating circuit pressure gauge Wifi included The modulating chronothermostat with integrated wi-fi has been designed to simplify the lives of installers, service centers and end users, as it allows you to manage home comfort directly from an App, via the wi-fi connection. By downloading the dedicated App on your smartphone or tablet, it will be possible to connect to the Baxi Mago to control the temperature, manage programming, view the consumption graph, read any error messages, set the holiday mode, etc. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

CHAFFOTEAUX CX GREEN 24 EU CONDENSING GAS BOILER COMPLETE WITH LPG FUME KIT WITH FREE DIRT SEPARATOR RUBINETTERIE BRESCIAN !!! Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Nominal heat input in heating max/min (Hi) : 23.5/4.5 kW Max/min DHW nominal heat input (Hi) : 23.5/4.5 kW Max/min heating thermal power (80°C-60°C): 23/4.4 kW Efficiency at nominal heat input: 97.7 / 88% Efficiency at 30% of the nominal heat input: 104.3 / 94% Expansion vessel capacity: 8 l Min/max heating temperature (high temperature range) °C 35/82 Min/max heating temperature (low temperature range) °C 25/45 DHW temperature min/max °C 36/60 Instantaneous quantity of hot water ΔT=25°C l/m 13.9 Instantaneous quantity of hot water ΔT=35°C l/m 9.9 Minimum withdrawal of hot water l/m <2 Electrical data: Supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 34 Electrical protection degree IP X5D CX GREEN EU   The compact condensing boiler with aluminum alloy condensing exchanger and with all the necessary requirements to achieve the required standards in terms of energy saving. Operation only methane. Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic water performance: stars **. Flow rate 13.1 litres/minute with ΔT = 25ºC. (24kW) Heating comfort Efficiency up to 108% with energy savings up to 35%. 4-star combustion efficiency in compliance with the EN92/42 standard. Modulation range from 25% to 100% of maximum power. Condensing exchanger in aluminum alloy. Reduced polluting emissions, NOx class 5. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Arrangement for integration into a heating system via the Ebus2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Possibility of managing single-temperature and multi-temperature zones only via Expert Control. Self-diagnosis system by code. LCD display. Comfort of use and installation Possibility of connection with external probe. Compatible with Expert Control, modulating accessories and on/ff. Easier starting: automatic purge function and directly accessible combustion regulation. Energy saving and respect for the environment Up to 20% energy savings in combination with chronothermostat and external probe. 40% reduction in CO 2 emissions **. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB THE BOILER IS BORN WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE Riello Open Chamber boiler mod. START 24 KI Low NOx - NEW ErP CODE 20151434 Product code: 20151434 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 26.7 kW Heating/DHW nominal heat output: 24 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn max - Pn min (80°-60°): 90.1-86.4% Profit return 30% (47th return): 89.2% Open chamber with natural draft NOx class: 6 Min/max heating operating pressure: 0.25-3 bar Max absorbed electric power: 47 W Expansion vessel: 8 litres Min/max pressure in DHW: 0.15-8 bar Quantity of hot water with Δt 25°C: 13.8 l/min Quantity of hot water at Δt 30°C: 11.5 l/min Quantity of hot water at Δt 35°C: 9.9 l/min Sanitary water temperature selection range: 37-60°C Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 740 x 400 x 332 ; 30 Kgs Electrical protection degree: IP X5D Power supply: METHANE Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service START 24 KI LN (LOW NOx) Start LN is characterized by a modern design despite its essentiality and is ideal for heating and the production of domestic hot water in small and medium-sized domestic users. Start LN is available in power ratings of 24 and 28 kW with low NOx emissions <56 mg/kWh. Characteristics: Double exchanger: domestic hot water production with plate exchanger for greater resistance to the formation of limescale CTR system for more rapid achievement of the desired comfort and a reduction in consumption and temperature changes in the heating bodies 8 liter expansion vessel Low consumption circulator (IEE≤0.20) Antifreeze function which protects the heating and DHW circuits down to 0°C Standard thermoregulation on the boiler board in combination with the external probe (optional) Can be interfaced with the Remote Control Panel Hydraulic connections available as an accessory kit Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service Electrical protection degree IP X5D Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

nb: LPG conversion kit supplied as standard Ariston CARES S 30 EU condensing boiler complete with flue gas exhaust kit Methane or LPG low NOx 3301638 - NEW Heating energy class A Energy class A for sanitary facilities XL load profile Nominal heat output max min heating 24.0/5.8 kW kW Nominal thermal capacity max min sanitary 29.0/5.8 kW kW Heating temperature max min 82 / 35 °C Quantity of hot water deltaT=25°C 16.0 litres/min Power supply voltage frequency 230/50 V/Hz Electrical protection grade X5D IP NOx class 6 CARES S The condensing boiler suitable for every need, able to combine great performance and high robustness. Thanks to the stainless steel condensing exchanger, CARES S represents the right balance between comfort and performance. Reduction of energy consumption up to 35% Stainless steel condensing exchanger More robust design thanks to the new metal front panel Better accessibility thanks to the front hydrometer MADE IN ITALY produced entirely in Italy SMALL SIZE small footprint for easy installation SYSTEM MANAGEMENT new communication protocol designed to ensure complete management of the system. Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less