SAVIO SuperEVOdens 28 S* LPG CONDENSING Boiler Complete with Fume Exhaust Kit - ErP Model: SuperEVOdens 24S ErP specifications Class B heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Heating/DHW nominal heat input: 25 kW Heating/DHW maximum useful power: 24.4 kW Yield name 60°/80°C: 97.4% Yield at 30% load: 98.9% High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) NOx class 2 Weighted NOx: 166 mg/kWh Minimum/maximum heating temperature: 40/85°C Minimum/maximum heating pressure 3.0/0.3 bar Expansion tank capacity 8 l (total) Minimum/maximum domestic hot water temperature 35/60°C Maximum flow rate (ΔT=25K)/(ΔT=35K): 13.9/10 l/min Specific sanitary flow rate (ΔT=30 K): 11.6 l/min Voltage / Power at nominal heat input V~/ W 230/82 IPX4D degree of protection Dimensions HxWxD 803x400x350; 42.5 kgs Power supply: methane or LPG Standard Digital electronic room thermostat Boiler support bracket and paper template Condensate collection siphon Quick instruction to the user SuperEVO dens SuperEVOdens is the condensing boiler designed for traditional systems and easily adaptable to new underfloor systems using SIMpatico, a hot water distribution device for heating Savings and ease of use SuperEVOdens maintains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler deriving from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at typical operating temperatures of radiator systems, leads SuperEVOdens to have higher yields than traditional boilers. High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06) Copper lamellar primary heat exchanger with large exchange surface and double circulation Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the water Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Digital control panel with backlit display Electronic board for: - Restart frequency adjustment - Adjustable primary circuit thermal inertia disposal - Circulator mode selection - Circulator anti-seize - Antifreeze safety - Chimney sweep function Integrated automatic by-pass 8 liter expansion vessel Immunity to radio interference Magnetic sanitary flow switch Absolute heating pressure switch IPX4D degree of protection High circulation primary exchanger It is the element that distinguishes the entire Savio range. It favors the flow of water into the heating system and, thanks to its reduced hydraulic resistance, adapts the boiler to the system and facilitates the transmission of heat to the radiators. Heat recovery The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator is made of aluminium, has a finned coil which determines a large exchange surface and has a device to ensure that the boiler discharges the condensate correctly Command panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display Display annual periodic maintenance expiry Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SAVIO ACTA GAS BOILER AND 24 A* METHANE OPEN CHAMBER Model: ACTA 24A Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary Energy Efficiency Class B Withdrawal profile: XL Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 26.6 kW Heating/DHW maximum useful power: 24.1 kW Yield name 60°/80°C: 90.6% Yield at 30% load: 89.6% Energy efficiency stars: (dir 92/42/EEC) ** NOx class n° 3 Weighted NOx: 135 mg/kWh Minimum/maximum heating temperature: 38/85 °C Minimum/maximum heating pressure: 0.3/3.0 bar Capacity of the expansion tank (total): 8lt DHW minimum/maximum temperature: 35/60°C Maximum flow rate (ΔT=25K) / (ΔT=35K): 13.8/9.9 l/min Specific sanitary flow rate (ΔT=30 K): 11.5 l/min Voltage / Power at nominal heat input V~/ W 230~/56 Degree of protection n° IPX4D Minimum/maximum smoke temperature: 83/108°C Extremely compact dimensions hxwxd: mm 703x400x325 ; 28.7kg CNG or LPG power supply ACTA ACTA is the range of Savio boilers designed to meet modern housing needs that require reliable, compact and high performance products. The ACTA range includes open chamber boilers with powers of 24 kW and 28 kW. The ACTA series is suitable for heating and domestic hot water production. ACTA has very compact dimensions which make it easy to place in any environment. Characteristics: High yields Primary heat exchanger in copper, high circulation lamellar Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Integration with SAVIO solar systems using a solar kit Digital control panel with display. The electronic card allows you to: - Adjust the ignition pressure - Adjust the restart frequency - Manage the post-circulation of the high efficiency pump - View fault diagnostics and lockout status. Also available: - Boiler antifreeze safety - Disposal of primary circuit thermal inertia. Primary exchanger ACTA is a high efficiency boiler: the most compact exchanger, with reduced fin pitch to increase their number and ensure maximum efficiency. The large heat exchange surface is guaranteed by the helical section of the passage pipes and by the lamellar structure. The high exchange efficiency is guaranteed by the double circulation in counter flow. The exchanger is made of copper with a protective coating resistant to high temperatures. Secondary exchanger ACTA is available in a mixed version for heating and domestic hot water production: the hot water is supplied at an adjustable and constant temperature thanks to the electronic modulation of the boiler. The DHW exchanger is made of stainless steel and has a low inertia which guarantees excellent performance. Control panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display Display annual periodic maintenance expiry Thermo-hydrometer for reading the water pressure on the primary side. Integration with solar ACTA can be easily combined with a solar system using the Biasi solar kit. Simple and immediate to install, it does not require electrical parts and allows optimizing the integration of the solar system with the boiler which intervenes only when necessary to guarantee the required comfort temperature. Reliability and security Hydraulic groups of innovative conception: Motorized 3-way valve Integrated automatic by-pass: allows the boiler to adapt to the needs of modern heating systems Absolute heating pressure switch: guarantees protection of the boiler in the event of a lack of water or circulation Sanitary flowmeter Easily accessible filling tap Drain tap Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SAVIO ACTA GAS BOILER AND 24 A* METHANE OPEN CHAMBER Model: ACTA 24A Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary Energy Efficiency Class B Withdrawal profile: XL Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 26.6 kW Heating/DHW maximum useful power: 24.1 kW Yield name 60°/80°C: 90.6% Yield at 30% load: 89.6% Energy efficiency stars: (dir 92/42/EEC) ** NOx class n° 3 Weighted NOx: 135 mg/kWh Minimum/maximum heating temperature: 38/85 °C Minimum/maximum heating pressure: 0.3/3.0 bar Capacity of the expansion tank (total): 8lt DHW minimum/maximum temperature: 35/60°C Maximum flow rate (ΔT=25K) / (ΔT=35K): 13.8/9.9 l/min Specific sanitary flow rate (ΔT=30 K): 11.5 l/min Voltage / Power at nominal heat input V~/ W 230~/56 Degree of protection n° IPX4D Minimum/maximum smoke temperature: 83/108°C Extremely compact dimensions hxwxd: mm 703x400x325 ; 28.7kg CNG or LPG power supply ACTA ACTA is the range of Savio boilers designed to meet modern housing needs that require reliable, compact and high performance products. The ACTA NEW range includes open chamber boilers with powers of 24 kW and 28 kW. The ACTA series is suitable for heating and domestic hot water production. ACTA has very compact dimensions which make it easy to place in any environment. Characteristics: High yields Primary heat exchanger in copper, high circulation lamellar Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Integration with SAVIO solar systems using a solar kit Digital control panel with display. The electronic card allows you to: - Adjust the ignition pressure - Adjust the restart frequency - Manage the post-circulation of the high efficiency pump - View fault diagnostics and lockout status. Also available: - Boiler antifreeze safety - Disposal of primary circuit thermal inertia. Primary exchanger ACTA is a high efficiency boiler: the most compact exchanger, with reduced fin pitch to increase their number and ensure maximum efficiency. The large heat exchange surface is guaranteed by the helical section of the passage pipes and by the lamellar structure. The high exchange efficiency is guaranteed by the double circulation in counter flow. The exchanger is made of copper with a protective coating resistant to high temperatures. Secondary exchanger ACTA is available in a mixed version for heating and domestic hot water production: the hot water is supplied at an adjustable and constant temperature thanks to the electronic modulation of the boiler. The DHW exchanger is made of stainless steel and has a low inertia which guarantees excellent performance. Control panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display Display annual periodic maintenance expiry Thermo-hydrometer for reading the water pressure on the primary side. Integration with solar ACTA can be easily combined with a solar system using the Biasi solar kit. Simple and immediate to install, it does not require electrical parts and allows optimizing the integration of the solar system with the boiler which intervenes only when necessary to guarantee the required comfort temperature. Reliability and security Hydraulic groups of innovative conception: Motorized 3-way valve Integrated automatic by-pass: allows the boiler to adapt to the needs of modern heating systems Absolute heating pressure switch: guarantees protection of the boiler in the event of a lack of water or circulation Sanitary flowmeter Easily accessible filling tap Drain tap Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SAVIO SuperEVOdens 24 S* METHANE CONDENSING Boiler Complete with Fume Exhaust Kit - ErP Model: SuperEVOdens 24S ErP specifications Class B heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Heating/DHW nominal heat input: 25 kW Heating/DHW maximum useful power: 24.4 kW Yield name 60°/80°C: 97.4% Yield at 30% load: 98.9% High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) NOx class 2 Weighted NOx: 166 mg/kWh Minimum/maximum heating temperature: 40/85°C Minimum/maximum heating pressure 3.0/0.3 bar Expansion vessel capacity 8 l (total) Minimum/maximum domestic hot water temperature 35/60°C Maximum flow rate (ΔT=25K)/(ΔT=35K): 13.9/10 l/min Specific sanitary flow rate (ΔT=30 K): 11.6 l/min Voltage / Power at nominal heat input V~/ W 230/82 IPX4D degree of protection Dimensions HxWxD 803x400x350; 42.5 kgs Power supply: methane or LPG Standard Digital electronic room thermostat Boiler support bracket and paper template Condensate collection siphon Quick instruction to the user SuperEVO dens SuperEVOdens is the condensing boiler designed for traditional systems and easily adaptable to new underfloor systems using SIMpatico, a hot water distribution device for heating Savings and ease of use SuperEVOdens maintains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler deriving from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at typical operating temperatures of radiator systems, leads SuperEVOdens to have higher yields than traditional boilers. High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06) Copper lamellar primary heat exchanger with large exchange surface and double circulation Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the water Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Digital control panel with backlit display Electronic card for: - Restart frequency adjustment - Adjustable primary circuit thermal inertia disposal - Circulator mode selection - Circulator anti-seize - Antifreeze safety - Chimney sweep function Integrated automatic by-pass 8 liter expansion vessel Immunity to radio interference Magnetic sanitary flow switch Absolute heating pressure switch IPX4D degree of protection High circulation primary exchanger It is the element that distinguishes the entire Savio range. It favors the flow of water into the heating system and, thanks to its reduced hydraulic resistance, adapts the boiler to the system and facilitates the transmission of heat to the radiators. Heat recovery The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator is made of aluminium, has a finned coil which determines a large exchange surface and has a device to ensure that the boiler discharges the condensate correctly Command panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display Display annual periodic maintenance expiry Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BUILT-IN UNIT NOT INCLUDED! TO PURCHASE RECESSED UNITS CLICK HERE Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL Nominal heat input 24.7 kW Nominal thermal power 24 kW Energy efficiency (92/42/EEC) **** Nominal efficiency 80/60°C % 97.7 Return at 30% % 108.8 Heating circuit water temperature control °C 25-80 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 13.8 Minimum domestic water flow rate: 2 l/min Minimum operating temperature: -15°C Expansion/pre-charge vessel capacity l/bar: 8/0.8 NOx class (EN 483): 5 Dimensions (hxlxp) - with case: mm 1170 x 600 x 245 Dimensions (hxwxd) - boiler 770 x 470 x 238 mm; 32.5kg Power supply: METHANE Luna Duo-Tec IN+ The efficiency of compact built-in comfort Baxi has always offered the ideal system solution for any type of home: for this reason the Duo-tec+ range is expanding with built-in models and for outdoor installation. Luna Duo-tec IN+ is the built-in condensing boiler, specifically designed to make it suitable for replacing an old built-in generator but also in new installations. The extremely compact dimensions of the boiler facilitate its installation in small/medium-sized apartments, and in general in all housing units where efficient space management is an important objective (for example in technical rooms or in the presence of ) Recessed installation outdoors Luna Duo-tec IN+ is the built-in condensing boiler, specifically designed to make it suitable for replacing an old built-in generator but also in new installations. The extremely compact dimensions of the boiler facilitate its installation in small/medium-sized apartments, and in general in all housing units where efficient space management is an important objective (for example in technical rooms or in the presence of ). Inside the packaging there are the bracket and installation fittings for inserting the boiler into the containment box Characteristics: Wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control Automatic plant loading system Minimum operating temperature: -15°C Remote digital control panel with LCD display Arrangement for combination with the Baxi integrated solar system High efficiency circulation pump with total modulation Ultra-compact dimensions: 770x470x238 mm (boiler) STANDARD installation kit (gas cock / gas inlet / telescopic fittings) Antifreeze function and IPX5D degree of protection Digital control panel The Duo-tec+ range of boilers is equipped with a digital control panel with backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and the heating. The display allows you to view all the information and set the operating parameters in a clear and immediate way. Gas Adaptive Control The innovative GAC ( Gas Adaptive Control ) automatic combustion control system guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the actual power dissipated from the building avoiding excessive heating/cooling of the building. Antifreeze function The boilers have been designed to allow the boiler to operate down to -15°C. Furthermore, the antifreeze function provides for the automatic ignition of the burner, avoiding freezing phenomena. Wide modulation range 1:7 greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of the continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: BOILER CANNOT BE INSTALLED IN PIEDMONT AND LOMBARDY DUE TO CURRENT REGULATIONS. NB2: IN THE ABSENCE OF THE PRODUCT, WE WILL SHIP THE THEMIS CONDENS 27 KW MODEL THIS MODEL IS USED EXCLUSIVELY TO CNG, BUT IT CAN BE CONVERTED TO LPG FREE OF CHARGE THROUGH AN AUTHORIZED SAUNIER DUVAL SERVICE CENTER Technical features Model: ErP efficiency class in heating/DHW: B/A Sanitary load profile: XL Type: Heating and domestic hot water Heating Nominal power P min/max heating 80/60°C: 12.2/24.1 kW Partial load efficiency 30% 40/30 °C %: 99.7 Sanitary Min/Max Rated Power (60°C): 12.5/24.0 kW Specific flow rate (∆T=25 K): l/min 13.8 Electrical characteristics Max power consumption: W 60 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (h x w x d): 720 x 405 x 330 mm LPG version THEMIS CONDENS Themis Condens is the ideal condensing solution for replacing traditional wall-mounted boilers that work with high temperature radiators in apartments. The boiler has all the characteristics of simplicity in both installation and management. Themis Condens was developed to give the right comfort, both for the production of domestic hot water and to provide the ideal climate in the rooms. Specially designed for replacement in high temperature systems Small size Simplicity of management Reduced electricity consumption thanks to the instantaneous high efficiency pump Themis Condens combines the simplicity of the traditional boiler with the efficiency of condensing boilers. Themis Condens runs on methane and can be converted to run on propane. Themis Condens is available in the power of: 24kW for heating and 24kW for domestic hot water production. 27kW for heating and 27kW for domestic hot water production Characteristics: Can be installed indoors. Continuous domestic hot water (DHW) production up to 16 l/min Small dimensions: 72cm high, 40 wide and 33 deep (24 kW) The boiler features a new high-efficiency pump with high performance and a 7-litre expansion tank. ErP efficiency class B in heating, A in DHW with XL profile. Reliability and Hermann Saunier Duval standard quality Specific for high temperature systems Large passages in the primary exchanger Reduced electricity consumption thanks to the high efficiency pump Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : atmoTEC Plus VMW 240/5-5 Product code : 0010016273 Power supply: methane Performance Nominal thermal power in sanitary mode: 24.0 DHW nominal heat input kW 26.7 Energy efficiency class in heating: C Sanitary energy efficiency class: B Sanitary load profile : XL NOx class : 3 Performance stars : ★★ Domestic hot water production (ΔT = 30K) 11.5 l/min Domestic hot water comfort stars : ★★★ Expansion vessel capacity: 10 litres Fumes discharge temperature : 84° ~ 117°C Sound power : 49.5 dB(A) Dimensions and weight Dimensions (HxWxD): 800x338x440 mm Weight : 40.0 Kg Open flue boiler Vaillant atmoTEC Plus Standard wall mounted boiler for heating and domestic hot water Three star comfort hot water DHW pre-heating function Can be installed outdoors, protected up to -10C 10l expansion vessel High efficiency modulating pump. Energy efficiency class up to B depending on the model. For more information, see the technical data sheet The plus range was designed by Vaillant to meet all comfort needs for the production of hot water and for heating. The new atmoTEC plus series with open chamber models with natural draft features the domestic hot water pre-heating function; this function satisfies the customer's needs by reducing production times and immediately provides comfort. With a renewed design and their reduced dimensions, 80 x 44 x 34 cm, they can be placed in any room and easily housed in wall units or cover cabinets. Vaillant does not stop at the design but continues in the development and research of the best performance for the plus series obtaining exceptional results in terms of silence and ease of installation. Vaillant plus series boilers are at the top of performance in terms of efficiency, temperature constancy and low maintenance costs, thanks to the high quality of the components. A novelty in response to the ErP regulation is the introduction of a high efficiency pump (class A). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

OFFER VALID UNTIL STOCKS LAST! LPG operation with the special conversion kit included as standard Technical features Model: Class B One Product code : 3301211 Typology : Sealed chamber Power supply: methane/LPG Energy efficiency Heating energy efficiency class: A Sanitary energy efficiency class: A ACS profile : XL Performance Heating capacity: 3.7 ~ 22.0 kW Nominal heat input in DHW : 3.7 ~ 26.0 kW Useful thermal power in heating: 3.5 ~ 21.5 kW Returns Efficiency at nominal heat input 60° / 80°C: 97.7% Efficiency at nominal heat input 30° / 50°C: 106.1% Efficiency at 30% at 30°C : 109.8% Performance High temperature heating temperature : 35° ~ 82°C Low temperature heating temperature : 35° ~ 82°C DHW temperature : 36° ~ 65°C Quantity of hot water deltaT 25°C : 22.6 l/min Quantity of hot water deltaT 35°C : 16.1 l/min Specific flow rate : 18.8 l/min Minimum operating temperature : > 0°C Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Total absorbed electrical power: 85.6 W Degree of protection : IP X5D Dimensions Dimensions (LxHxP): 600x900x474 mm Wall mounted boiler Ariston CLAS B ONE Condensing boiler with integrated storage tank of 40 l The simplest solution for a condensing boiler New communication protocol set up to ensure complete system management Comfort function It speeds up hot water dispensing in two modes: Comfort Plus mode, always hot water in just 5'' and Comfort mode which allows you to have hot water for 30' after the last draw. Auto function Maximum comfort, efficiency and energy savings based on the automatic analysis of the environmental conditions, connected external devices and required performance Super Silence Silent operation in all operating modes Characteristics XtraTech™ heat exchanger in exclusive Ariston stainless steel, with high head Exchanger passage sections +142% compared to the previous version Modulation ratio 1:7 2 stainless steel stratification boilers of 20 l Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Unical KON X SLIM 24C condensing boiler complete with low NOx LPG fume exhaust kit - New Minimum/nominal useful power in condensing kW 3.22 ÷ 23.7 Heating efficiency class A Declared load profile L Sanitary efficiency class A Efficiency at nominal thermal power in high temperature regime (Tr 60°C / Tm 80°C) η4 % 88.7 production DHW cont. Dt 25 K (mixed) l/min 13.2 Total expansion tank capacity l 9 (6+3) IP X5D degree of protection NOx class 5 Dimensions HxWxD mm 800x520x180 KON X SLIM KONx SLIM is a condensing boiler running on methane or LPG, with instantaneous production of domestic hot water. Covered with a satin finish AISI 304 stainless steel casing, it is ideal for outdoor installations, but equally elegant indoors. KONx SLIM is: Performant 24 and 35 kW (Range rated) Modulation ratio 1:8 Low NOx class 5 High energy efficiency A+ (System) the top of the category, >98% Hs (superior calorific value) Insulated and protected IP X5D, suitable for outdoor installation according to current standards (up to -15°C with antifreeze kit) Extremely compact with its depth of only 18 cm, Unical's record among wall-hung condensing boilers KONx SLIM, thanks to the RCh chronothermostat, OT multiprogram modulator, connected to the ambient and external probes supplied as standard, reaches seasonal efficiency equal to energy class A+ in heating. HWS "Hot Water Speed" is the new KONx SLIM electronics that switches from heating to DHW function with burner and pump always active, considerably improving user comfort who does not have to wait for hot water. Covered with a satin-finish AISI 304 stainless steel casing with a tapered-edge casing finish, KONx SLIM appears to have an essential and very elegant line, combining, with its hi-tech style, with the other appliances in the house Super small size depth of only 18cm Management of 2 temperature zones (high/low) by applying a second on/off thermostat Sliding temperature programmed to operate with the lowest possible delivery temperature to help save energy Intelligent system filling to guarantee functionality If the pressure is below 0.4 bar in the system circuit, the automatic water filling starts for 30 seconds once a day. If the request is repeated several times, a warning signal appears on the remote control Anti-overheating post-circulation automatically after the burner goes out, the boiler keeps the pump running for 5 minutes, preserving the components Chimney sweep function allows maintenance technicians to carry out the checks required by current standards in terms of efficiency and emissions Multigas operation (natural gas or LPG) with simplified switching Double expansion tank If necessary, it can mount an external auxiliary expansion tank (optional) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: BOILER CANNOT BE INSTALLED IN PIEDMONT AND LOMBARDY DUE TO CURRENT REGULATIONS. NB2: IN THE ABSENCE OF THE PRODUCT, WE WILL SHIP THE THEMIS CONDENS 27 KW MODEL Technical features ErP efficiency class in heating/DHW: B/A Sanitary load profile: XL Type: Heating and domestic hot water Heating Nominal power P min/max heating 80/60°C: 12.2/24.1 kW Partial load efficiency 30% 40/30 °C %: 99.7 Sanitary Min/Max Rated Power (60°C): 12.5/24.0 kW Specific flow rate (∆T=25 K): l/min 13.8 Electrical characteristics Max power consumption: W 60 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (h x w x d): 720 x 405 x 330 mm METHANE version THEMIS CONDENS Themis Condens is the ideal condensing solution for replacing traditional wall-mounted boilers that work with high temperature radiators in apartments. The boiler has all the characteristics of simplicity in both installation and management. Themis Condens was developed to give the right comfort, both for the production of domestic hot water and to provide the ideal climate in the rooms. Specially designed for replacement in high temperature systems Small size Simplicity of management Reduced electricity consumption thanks to the instantaneous high efficiency pump Themis Condens combines the simplicity of the traditional boiler with the efficiency of condensing boilers. Themis Condens runs on methane and can be converted to run on propane. Themis Condens is available in the power of: 24kW for heating and 24kW for domestic hot water production. 27kW for heating and 27kW for domestic hot water production Characteristics: Can be installed indoors. Continuous domestic hot water (DHW) production up to 16 l/min Small dimensions: 72cm high, 40 wide and 33 deep (24 kW) The boiler features a new high-efficiency pump with high performance and a 7-litre expansion vessel. ErP efficiency class B in heating, A in DHW with XL profile. Reliability and Hermann Saunier Duval standard quality Specific for high temperature systems Large passages in the primary exchanger Reduced electricity consumption thanks to the high efficiency pump Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! For the transformation of methane/LPG/free propane air to be requested from the Authorized Assistance Centre Technical features Model : Enerwa 24 Gas : Methane / LPG Hydraulic unit material : Brass Class : NOx 5 Gas circuit Natural gas consumption: 0.37 ~ 2.38 m 3 /h LPG gas consumption: 0.11 ~ 0.92 m 3 /h Efficiency : 108.3% Radiator circuit Maximum thermal load : 24.25 kW Maximum thermal power (80/60° C): 23.7 kW Maximum thermal power (50/30° C): 25 kW Thermal regulation range : 25° ~ 80° C Maximum working pressure: 3 bar Domestic hot water circuit Maximum domestic hot water capacity: 31.15 kW Maximum domestic hot water flow rate (∆t: 30°C): 14.8 l/min Maximum domestic hot water flow rate (∆t: 25°C): 17.9 l/min DHW temperature adjustment : 35° ~ 60 °C Electrical circuit Power supply (V,Hz, Ø) : 220~240/50/1 Power Consumption: 55~95W Dimensions and weight Dimensions (HxWxD): 725x420x288 mm Weight : 31.4Kg Warmhaus Enerwa and EnerwaPlus boilers The New Era of Boilers Combined wall boiler Enerwa and Enerwa Plus thanks to their small dimensions of only 288mm deep and their modern design are ideal for installation on balconies or inside kitchens Reliable and efficient The new self-adaptive system of the electronic gas valve precisely adjusts the combustion ratio between air and gas. No pre-heating system, the boiler keeps the water hot for the entire time of use. Effective circulation Circulator with frequency converter, it is a high efficiency pump with a head of 7 mwc Intelligent LCD display Large LCD display, the display shows the heating temperature, DHW and internal pressure System expansion 8 liter expansion vessel. The new expansion vessel is capable of supplying 130/140lt of water to the system Adaptive Gas Control With its signal it can provide simultaneous control of ionization and gas valve Highly economical It is a question of having an electrical consumption reduced to a maximum of 82W Hot water and continuous flow Asymmetrical exchanger system, provides a high flow input with its large water passages Pressure sensor to optimize performance Possibility to set the altitude of the boilers to optimize efficiency Silent operation Thanks to the 10mm internal lining, you work very silently and with excellent thermal insulation Processor specifications SMART WARMHAUS High efficiency High efficiency radial heat exchanger with low risk of clogging and leak proof. Panel features Selection buttons for mode, reset, heating and DHW Intuitive buttons for selecting the heating and DHW temperature Temperatures on LCD screen Flame modulation indicator Digital pressure gauge Self-diagnostic codes and system identification Different working parameters for boilers Differences between Enerwa and EnerwaPlus Energy Aesthetics Control Panel: 2 Knobs, 2 Buttons LCD display : 30 mm x 44 mm , Blue LCD screen , backlit Water pressure switch: EO2 low pressure alarm. Water pressure visible on the pressure gauge Self-regulating circulator EnerwaPlus Aesthetics Control Panel : 6 Buttons LCD display : 40 mm x 75 mm , Orange LCD screen , backlit Water pressure switch : Water pressure sensor. EO2 low pressure alarm. E03 high pressure alarm. Water pressure visible on pressure gauge and LCD screen Circulator with PWM (Pulse-Width-modulation) control Pulse-width modulation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! For the transformation of methane/LPG/free propane air to be requested from the Authorized Assistance Centre Warmhaus MINERWA The smallest and lightest boiler in the world With its minimal size, elegant design and technology, Minerwa can be installed in any environment. The Minerwa boiler will provide you with the necessary comfort thanks to its innovative technology, high flow rate, and ease of installation. Why choose Minerwa? The smallest and lightest condensing boiler Minerwa , with its dimensions 38x59.5 mm with a weight of 25.5 kg , is the smallest and lightest combi boiler in the world . High Efficiency with Gas Adaptive System The Minerwa ErP gas adaptive boiler provides high efficiency by continuously adjusting the air to gas combustion ratio ( 108% Efficiency ). Sanitary comfort for 2 users at the same time The heat exchanger can supply hot water up to 14.8 liters per minute giving the possibility of using 2 users at the same time . Completely safe Minerwa boilers heat you and your loved ones safely with its 23 different safety systems Elegant and Design Touch Glass Front Panel Minerwa offers a modern and elegant design with elegant corner lines, widescreen orange backlight, easy to use on-glass controls with different color options . Optimized energy consumption Minerwa boilers will provide you with the required comfort with the lowest possible consumption thanks to their wide modulation ( 1:10 modulation ) Energy Class The Minerwa boiler is fully compliant with the ErP directives of the European Union, both for gas and electricity consumption Long life With its single coil stainless steel heat exchanger and high quality components, Minerwa ofers long lasting and trouble free use over time Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less