Overview SAVIO EVOdens MAX E 35S* CONDENSING BOILER WITH TANK COMPLETE WITH LPG LPG FUME EXHAUST KIT - NEW ErP Technical specifications Model:ÿEVODENS MAX LPG code: 103041007300 LPG code: 103141006300 Characteristics of heating/sanitary exercises: Heating/sanitary nominal heat inputkWÿ30.0 / 34.0 Heating/sanitary maximum useful powerkWÿ29.5 / 33.4 Yield name 60ø/80øC %ÿ98.2 Yield min. 60ø/80øC %ÿ97.6 Yield at 30% of the %102.1ÿ load Energy efficiencynø Minimum / maximum heating temperature**øC 25 / 85 Sanitary minimum / maximum pressurebar 0.3 / 3.0 Sanitary expansion vessel capacity (total) l 2.0 Boiler nominal capacity l 45 Boiler useful capacity l 41 Maximum flow rate (T=25 K) / (T=35 K) l/minÿ20.8 / 13.6 Voltage / Power at nominal heat input V ~ / W 230 ~ / 112 Power at minimum thermal capacity W 10 Power at rest (stand-by) W 5 Degrees of protection nø IPX4D Boiler water content 3.5 l Dimensions HxWxD:ÿ900x600x400; 70.5 Characteristics EVO DENS MAX E The EVODENS MAX E boilers with porcelain-glass storage tank were designed to satisfy the most demanding users: large and immediate production of domestic hot water despite being a boiler of contained dimensions. The storage tank, together with the latest generation primary condensing exchanger, ensure continuous supply of domestic water in service at the desired temperature. For this reason, EVODENS MAX E boilers are the ideal solution for the comfort of the whole family. Features:ÿ High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06) Sanitary comfort( EN 13203) Primary and condensing exchanger in stainless steel with plastic coatings to offer maximum resistance to corrosion Total premix burner, built in stainless steel (ClassÿNOx 5) High efficiency pump with low energy consumption, ErP Ready Maximum power adjustable according to the needs of the system Glass-porcelain steel boiler with convenient inspection and cleaning flange Magnesium anodal dismountable External insulation of the boiler in polyurethane foam Two-litre sanitary expansion tanks, as standard Degrees of protection IPX5D Installability in a partially protected place Integration with Savio solar systems, using a solar kit Innovative digital control panel with graphical interface and keys Digital pressure reading by pressure transducer Arrangement for external probe remote control Possibility of managing a zone valve by means of a remote control in the case of multi-zone systems Four-controllers Summer / winter / off selector Heating temperature regulator DHW temperature regulator Digital pressure reading DHW and heating temperature visualization from the display Fault diagnostics display, fault history block status View recommended fills fill guide View months left until annual maintenance is due External temperature display (with external probe connected) and signaling of external probe connected and ÿK value set Flame modulation display Visualization of SaviSOLCONTROL solar control unit connected to EVODENS MAX E, active solar pump and solar integration Sanitary comfort function selectable via dedicated key Ingressdirectal INFO menu dedicated to the user STANDARD: Boiler support bracket and paper template Boiler power cable Condensate collection siphon Quick instruction to the user OPTIONALS: Paper template remote control External probe kit Tap kit (system boiler connection pipes, gas and sanitary water taps and quick couplings) Ecodesign directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase. Shipping From the day payment is received, the product will be shipped within 3 working days. Free insured shipping for Italy. Shipping will take place via one of the national carriers

Read more less

Overview SAVIO EVOdens MAX E 35S* CONDENSING BOILER WITH TANK COMPLETE WITH LPG METHANE FUME EXHAUST KIT - NEW ErP Technical specifications Model:ÿEVODENS MAX LPG code: 103041007300 CNG code: 103141006300 Characteristics of heating/sanitary exercises: Heating/sanitary nominal heat inputkWÿ30.0 / 34.0 Heating/sanitary maximum useful powerkWÿ29.5 / 33.4 Yield name 60ø/80øC %ÿ98.2 Yield min. 60ø/80øC %ÿ97.6 Yield at 30% of the %102.1ÿ load Energy efficiencynø Minimum / maximum heating temperature**øC 25 / 85 Sanitary minimum / maximum pressurebar 0.3 / 3.0 Sanitary expansion vessel capacity (total) l 2.0 Boiler nominal capacity l 45 Boiler useful capacity l 41 Maximum flow rate (T=25 K) / (T=35 K) l/minÿ20.8 / 13.6 Voltage / Power at nominal heat input V ~ / W 230 ~ / 112 Power at minimum thermal capacity W 10 Power at rest (stand-by) W 5 Degrees of protection nø IPX4D Boiler water content 3.5 l Dimensions HxWxD:ÿ900x600x400; 70.5 Characteristics EVO DENS MAX E The EVODENS MAX E boilers with porcelain-glass storage tank were designed to satisfy the most demanding users: large and immediate production of domestic hot water despite being a boiler of contained dimensions. The storage tank, together with the latest generation primary condensing exchanger, ensure continuous supply of domestic water in service at the desired temperature. For this reason, EVODENS MAX E boilers are the ideal solution for the comfort of the whole family. Features:ÿ High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06) Sanitary comfort( EN 13203) Primary and condensing exchanger in stainless steel with plastic coatings to offer maximum resistance to corrosion Total premix burner, built in stainless steel (ClassÿNOx 5) High efficiency pump with low energy consumption, ErP Ready Maximum power adjustable according to the needs of the system Glass-porcelain steel boiler with convenient inspection and cleaning flange Magnesium anodal dismountable External insulation of the boiler in polyurethane foam Two-litre sanitary expansion tanks, as standard Degrees of protection IPX5D Installability in a partially protected place Integration with Savio solar systems, using a solar kit Innovative digital control panel with graphical interface and keys Digital pressure reading by pressure transducer Arrangement for external probe remote control Possibility of managing a zone valve by means of a remote control in the case of multi-zone systems Four-controllers Summer / winter / off selector Heating temperature regulator DHW temperature regulator Digital pressure reading DHW and heating temperature visualization from the display Fault diagnostics display, fault history block status View recommended fills fill guide View months left until annual maintenance is due External temperature display (with external probe connected) and signaling of external probe connected and ÿK value set Flame modulation display Visualization of SaviSOLCONTROL solar control unit connected to EVODENS MAX E, active solar pump and solar integration Sanitary comfort function selectable via dedicated key Ingressdirectal INFO menu dedicated to the user STANDARD: Boiler support bracket and paper template Boiler power cable Condensate collection siphon Quick instruction to the user OPTIONALS: Paper template remote control External probe kit Tap kit (system boiler connection pipes, gas and sanitary water taps and quick couplings) Ecodesign Directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase. Shipping From the day payment is received, the product will be shipped within 3 working days. Free insured shipping for Italy. Shipping will take place via one of the national carriers

Read more less

ARISTON GENUS PREMIUM EVO 35 EU CONDENSING BOILER COMPLETE WITH LPG - ErP FUME EXHAUST KIT Technical features Product code: 3300706 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 31/3.5 Max/min heating thermal power (80°C-60°C) kW 30.1/3.4 Efficiency at nominal heat input (60/80°C) % 97.7 Efficiency at nominal heat input (30/50°C) % 106.5 Efficiency at 30% at 30°C % 108.7 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 20/ 45 Specific flow rate in sanitary mode (10 min. with ∆T=30°C) litres/min 16.0 Quantity of hot water ∆T=25°C litres/min 19.3 Quantity of hot water ∆T=35°C litres/min 13.8 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 77 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 770/400/385 CNG or LPG power supply Kit for conversion from methane to propane supplied Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. EVO : energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the energy certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy. Genus Premium Evo The Genus Premium Evo wall-mounted boiler is the maximum expression of the Ariston range. Thanks to the condensing technology, by recovering the energy of the exhaust fumes, it generates an increase in the calorific value which makes it possible to eliminate waste (of energy) and to obtain higher thermal efficiency than conventional boilers. Genus Premium Evo offers even greater performance thanks to the innovative technology that allows it to self-regulate according to variations in the external and internal temperature of the room, allowing energy savings of up to 35% compared to an older generation boiler. It is available in the heating and domestic hot water production version in 3 powers: 24-30-35 kW (sealed chamber). Characteristics: Can be installed in partially protected places Large backlit dot matrix screen Continuous modulation high-efficiency circulator: for optimizing consumption and maximizing performance. Modulation ratio 1:10 - Automatic power regulation according to the heating request. Acoustic comfort guaranteed by the lower number of boiler on and off cycles, new silencer and sound-absorbing panels Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Isothermal primary heat exchanger in stainless steel Increased sanitary exchanger Cold water inlet and heating return filters Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Clas Premium Evo thanks also to the high modulation ratio of 1:10, the continuously modulating pump and the presence of side sound-absorbing panels. High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Nominal heating heat input: 34.60 kW Heating nominal heat output: 33.74 kW Classification European Directive EEC 92/42: ★ ★ ★ ★ Sanitary comfort ★ ★ ★ Expansion vessel capacity: 10 l Quantity of hot water with Δt=25°C: 19.8 l/min Minimum domestic water flow rate: 2 l/min Sanitary water temperature selection range: 35 - 60°C Total electric power: 125W Electrical protection degree: IP X5D NOx emission class: 5 Power supply: methane Characteristics Modulation 1:10 Low consumption modulating circulator (Class A) Patented condensing exchanger (Patent Pending) in aluminum with high flow rate Thermoregulation with standard external probe Standard hydraulic fitting cover For gas conversion, contact authorized Beretta Technical Assistance Centres Dimensions Dimensions (HxWxD): 845x453x358 mm Weight: 45Kg

Read more less

Riello FAMILY CX 35 KIS condensing boiler complete with Low NOx methane fume exhaust kit - NEW ErP technical data Energy class A Load profile XXL NOx class 6 Warm-up exercise characteristics Nominal heat input kW 30 Nominal thermal power (80°/60°) kW 29.2 Maximum pressure bar 3 Features exercise in sanitary Nominal heat input kW 34.6 Nominal thermal power (*) kW 36.3 Electrical data Supply voltage V-Hz 230-50 IP X5D degree of protection Dimensions WxDxH mm 470x350x822 New Family The new Family is the Riello solution for the most demanding user. The primary exchanger, entirely made of stainless steel, guarantees maximum efficiency and reliability over time and the new optimized sanitary exchanger ensures exceptional comfort and the best class of merit (class A). The new Family is available with powers of 25, 30 and 35 kW, in instantaneous combined and heating only versions. – ACC self-adaptive electronic combustion control – Range Rated Approval – Possibility of integration in hybrid systems – New panel with color display and intelligent system filling function – 10 liter expansion tank – Low consumption modulating circulator – Modulation ratio 1:8 – Standard flue gas flange with dedicated flue system – Clapet valve and SRD device as standard – Standard thermoregulation in combination with the external probe, available as an accessory – Possibility of recessed installation (model 25 KIS) and outdoors in partially protected places (IPX5D) – Ease of installation and wide choice of accessories - Primary heat exchanger in stainless steel - High performance sanitary exchanger - Self-adaptive electronic combustion control - Class 6 NOx Combined and heating only models, MTN and LPG compatible Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

General characteristics Energy label specifications according to the European ErP directive   Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 31/7.0 Nominal heat input in DHW max/min kW 34.5/7.0 Max/min heating thermal power (80°C-60°C) kW 30.3/6.7 Efficiency at nominal heat input (60/80°C) % 97.7 Efficiency at nominal heat input (30/50°C) % 106.5 Efficiency at 30% at 30°C % 108.7 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 20/ 45 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 22.1 Quantity of hot water ∆T=25°C litres/min 19.3 Quantity of hot water ∆T=35°C litres/min 13.8 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 120 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 900/600/460 METHANE power supply Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water.   Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies...  Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers.  EVO: energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the Energy Certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy.   Class B Premium Evo Clas B Premium EVO , with integrated 40-litre double stratification storage tank, has been designed for intelligent management of domestic water. The new Clas B Premium EVO boilers, equipped with the new ABC System storage system, rationalize energy consumption and ensure cost savings on bills. The new system, a great technological intuition by Ariston, makes it possible to immediately obtain large quantities of hot water without waiting for the water in the boilers to heat up completely, thus avoiding useless waste of energy. Clas B Premium EVO is available in the heating and domestic hot water production version in 2 powers: 24 and 35 kW (sealed chamber).   Characteristics: Backlit multifunction LCD screen Continuous modulation high-efficiency circulator for optimizing consumption and maximizing performance. Modulation ratio 1:4 Acoustic comfort guaranteed thanks to the dedicated silencer Stratified boilers in duplex stainless steel Arrangement for integration with system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Isothermal primary heat exchanger in stainless steel Oversized DHW exchanger and 2-litre DHW expansion vessel Heating expansion vessel 10 lt Cold water inlet and heating return filters   Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology   Ecodesign directive: from 2015 only new condensing boilers    After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling?       Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹.   How to read energy labels    There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ARISTON GENUS PREMIUM NET 35 EU SMART Wi-Fi CONDENSING BOILER COMPLETE WITH METHANE FUME KIT - NEW ErP Product code: 3300906 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 31/3.5 Max/min heating thermal power (80°C-60°C) kW 30.1/3.4 Efficiency at nominal heat input (60/80°C) % 97.7 Efficiency at nominal heat input (30/50°C) % 106.5 Efficiency at 30% at 30°C % 108.7 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 20/ 45 Specific flow rate in sanitary mode (10 min. with ∆T=30°C) litres/min 16.0 Quantity of hot water ∆T=25°C litres/min 19.3 Quantity of hot water ∆T=35°C litres/min 13.8 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 77 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 770/400/385 Genus Premium NET The top-of-the-range condensing boiler, complete with connectivity service. The Genus Premium NET wall-mounted boiler, in addition to being the maximum expression of the Ariston range, is already ready for use of the connectivity service. Thanks to the condensing technology, by recovering the energy of the exhaust fumes, it generates an increase in the calorific value which makes it possible to eliminate waste (of energy) and to obtain higher thermal efficiency than conventional boilers. Genus Premium Evo offers even greater performance thanks to the innovative technology that allows it to self-regulate according to variations in the external and internal temperature of the room, allowing energy savings of up to 35% compared to an older generation boiler. It is available in the heating and domestic hot water production version in 2 powers: 24-35 kW. Characteristics: Can be installed in partially protected places Large backlit dot matrix screen Continuous modulation high efficiency circulator Modulation ratio 1:10 Acoustic comfort guaranteed by the lower number of boiler on and off cycles, new silencer and sound-absorbing panels Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Isothermal primary heat exchanger in stainless steel Increased sanitary exchanger Cold water inlet and heating return filters 60mm split exhaust + COMFORT: The system manager constantly monitors the room temperature even if you are away from home. No more surprises when you return! + SAVINGS: It is possible to synchronize the temperature in your home with the rhythms of your life, avoiding useless ignitions of the boiler. Lower consumption in the bill, less stress for your system! + RELIABILITY: Your trusted TAC will assist you constantly by monitoring the performance and correct functioning of your system. Serenity will always be by your side THREE SIMPLE STEPS TO GET THE MAXIMUM BENEFITS FROM THE INNOVATIVE PACKAGE 1. RECEIVE THE BOILER COMPLETE WITH THE CONNECTIVITY KIT DIRECTLY AT HOME 2. DOWNLOAD THE FREE APP TO MANAGE THE SYSTEM EVEN AWAY FROM HOME 3. CHOOSE THE TRUSTED CAT FOR CONSTANT ASSISTANCE AND TO ENSURE OPTIMAL PERFORMANCE AT ALL TIMES* Comfort and savings within reach of your smartphone, one more reason to switch to AristonNet! Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. EVO: energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the energy certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Heating and DHW energy efficiency class: Class A Nominal heat output: 34.0 kW Nominal heat input: 34.8 kW Sanitary nominal thermal power: 34.8 kW Sanitary flow rate ΔT = 30 K / Specific flow rate sec. EN 625: 16.7 / 15.3 l/min Sanitary temperature range that can be set: 40-60 °C NOx class: 5 Degree of protection: IP X4D Characteristics With expansion vessel, 3-way valve and circulator. Suitable for use with Ø 60 mm drains. Bosch Heatronic 3®, BUS system. Compatible with solar thermal systems for DHW. Patented active and passive solar optimization algorithm SolarInside-ControlUnit Possibility of electrically connecting an additional circulator. Continuous power modulation (DHW and heating). Modulating circulator. Heating side expansion vessel 12 liters (ZWBR and ZSBR). Patented high efficiency primary heat exchanger in aluminum and silicon alloy. Heating side filling cock. Dimensions Dimensions (HxWxD): 850x440x850 mm Weight: 50Kg

Read more less

Technical features Model : Genus One 35 Product code : 3301020 Energy efficiency Energy class: A Sanitary energy class: A Load profile : XL Combustion Maximum useful thermal power in heating: 3.3 kW Minimum useful thermal power in heating: 3.3 kW Minimum nominal heat input in heating: 3.5 kW Maximum nominal heat input in heating: 3.10 kW Minimum nominal heat input in DHW: 3.5 kW Maximum nominal heat input in DHW: 34.5 kW Yield Efficiency at nominal heat input (60/80°C): 97.7% Efficiency at nominal heat input (30/50°C): 108.0% Efficiency at 30% (30°C) : 109.5% Performance Minimum temperature in high temperature heating : 35°C Maximum temperature in high temperature heating: 82°C Minimum temperature in low temperature heating: 20°C Maximum temperature in low temperature heating: 20°C Minimum temperature in domestic hot water: 36°C Maximum temperature in domestic hot water: 36°C Quantity of hot water (25°C): 19.8 l/min Quantity of hot water (35°C): 14.1 l/min Specific flow rate : 16.5 l/min Electrical data Power (V/Hz/Φ) : 220~240/50/1 Absorbed electrical power: 82.0 W Electrical system protection degree: IPX5D Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

CAUTION Natural gas, LPG and propane air operation without the need for a kit. The transformation takes place thanks to the combustion control by selecting the type of gas from the technical menu. For info, contact the local authorized assistance center in advance ARISTON CONDENSING BOILER GENUS ONE NET 35 KW LPG COMPLETE WITH FU MI EXHAUST KIT Technical features Energy class in heating: A Sanitary energy class: A Profile: XL Forced draft sealed chamber Energy data: Nominal heat flow in heating (max/min): 31.0/3.5 kw Nominal heat input in DHW (max/min): 34.5/3.5 kw Thermal power (max/min) from 80° C- 60° C: 30.3/3.3 kw Thermal power (max/min) from 50° C- 30° C: 33.5/3.6 kW DHW thermal power (max/min): 33.1/3.4 kW Performance Stars: 4**** Expansion tank pressure: 1 bar Maximum pressure: 3 bars Expansion vessel capacity 8 l High temperature range (min.max): 35/82 °C Low temperature range (min/max): 20/45 °C Exercise performance in healthcare: Min/max domestic hot water temperature: 36/60 °C Specific flow rate (10 min. with ∆T=30°C): 16.5 litres/min Quantity of hot water ∆T=25°C: 19.8 litres/min Quantity of hot water ∆T=35°C: 14.1 litres/min Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50  Minimum ambient temperature of use: >0°C Power consumption: 82W; Electrical protection: IP X5D; Drain: 80, 60, 50 mm; Power supply: LPG (G31, Propane) General characteristics New generation Ariston condensing boiler, it is the perfect mix of innovation and maximum comfort at your fingertips, in fact by connecting the appliance (also thanks to the Cube S NET, the room thermostat with integrated connectivity) to your smartphone or tablet via the appropriate downloadable app for both IOS or Android, the efficiency of the boiler connected to your smartphone give the maximum desired comfort. Installation in partially protected places or with suitable boiler covers is recommended due to the need for outdoor installation to better protect the appliance. Equipped with a large Dsplay with backlit touch interface to view correct operation and regulation or in the event of boiler malfunction for rapid intervention by authorized personnel. To always have domestic hot water ready, the Genus One Net boiler works with a high-efficiency circulator with continuous modulation (ratio 1:10) so as to respond quickly to the user's needs. Finally, the boiler is extremely silent, guaranteeing minimum acoustic disturbance, guaranteeing fewer cycles on and off the boiler and a new silencer and sound-absorbing panels that allow minimum noise. Advantages: Prepared for integration into system configuration Through the new Bus Bridgenet® communication protocol; Arrangement for multi-zone and multi-temperature thermoregulation; Arrangement for solar system management; Functions: Car and comfort function; Isothermal primary heat exchanger in stainless steel; Increased DHW exchanger; Ignition system; electronic combustion control; Gas transformation from the technical menu; Cold water inlet and heating return filters; Dimensions : (HxWxD) 745x440x385mm; Weight: 37.6Kg; Product Guarantee : All the products on sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

CAUTION Natural gas, LPG and propane air operation without the need for a kit. The transformation takes place thanks to the combustion control by selecting the type of gas from the technical menu. For info, contact the local authorized assistance center in advance ARISTON condensing BOILER ALTEAS ONE NET 35 KW EU METHANE COMPLETE WITH FUME EXHAUST KIT - ErP Technical features Product code: 3301060 Energy label specifications according to the European ErP directive Class A heating energy efficiency (A+ achieved thanks to thermoregulation) Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Nominal thermal power kW 31 Annual energy consumption in heating 54 gj Annual electricity consumption 50 kWh Seasonal space heating energy efficiency % 94 Water heating energy efficiency % 86 Sound power level inside 51 dB DHW flow rate ∆T 25 °C (l/min) 19.8 Dimensions 24 kW mm (HxWxD) 745 x 400 x 315 Indoor installation and partially protected places Power supply: methane or LPG Functionality: Connectivity integrated in the boiler HI-Comfort functions AUTO, Comfort, CARE Thermoregulation including CUBE thermostat + external probe Large display, touch interface XtraTech stainless steel heat exchanger General characteristics ONE Series , the new generation of condensing boilers Serie ONE is the new generation of Ariston condensing boilers, studied down to the smallest detail to guarantee maximum performance for a long time. New XTRATECH heat exchanger : Maximum quality. XtraTech is the new exclusive* Ariston stainless steel heat exchanger, the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations. Excellent results, over time. Always connected with Ariston NET Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone. Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET. Absolute efficiency: Thermoregulation in class A+ The ONE condensing boilers achieve very high seasonal performance and thanks to the thermoregulation they reach class A+! Alteas and Genus ONE are also equipped with the innovative IGNITION system, which makes combustion always perfect thanks to the electronic control. Gas transformation? No problem, from the technical menu in one touch. Total Comfort : Innovative functions to satisfy your need ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy. Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance. ALTEAS ONE NET Top of the range condensing boiler, Italian design and integrated connectivity. It represents the perfect combination of excellent performance and innovative design. The front panel in tempered glass, the HI-tech display and integrated connectivity make Alteas the perfect boiler for exclusive furnishing solutions. The efficiency of the boiler combines with the advantages of the Ariston NET service to control your system remotely, keep consumption under control and have peace of mind thanks to a technician who is always by your side. All via a simple free smartphone app! New XtraTech exchanger in exclusive Ariston stainless steel*, with high head Exchanger passage sections +142% compared to the previous version Tempered and scratch resistant glass panel Large display, touch interface Ignition system, electronic combustion control Gas transformation from the technical menu Class A+ in heating, thanks to the Cube thermostat and external probe included as standard Modulation ratio 1:10 Ariston NET connectivity included in the boiler BusBridgeNet® communication protocol AUTO function, Comfort New CARE function, automatic reminder of ordinary maintenance Internal sound absorbing panels Installation in partially protected places Fumes discharge 80, 60, 50 m Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

CAUTION Natural gas, LPG and propane air operation without the need for a kit. The transformation takes place thanks to the combustion control by selecting the type of gas from the technical menu. For info, contact the local authorized assistance center in advance ARISTON condensing BOILER ALTEAS ONE NET 35 KW EU METHANE COMPLETE WITH FUME EXHAUST KIT - ErP Technical features Product code: 3301060 Energy label specifications according to the European ErP directive Class A heating energy efficiency (A+ achieved thanks to thermoregulation) Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Nominal thermal power kW 31 Annual energy consumption in heating 54 gj Annual electricity consumption 50 kWh Seasonal space heating energy efficiency % 94 Water heating energy efficiency % 86 Sound power level inside 51 dB DHW flow rate ∆T 25 °C (l/min) 19.8 Dimensions 24 kW mm (HxWxD) 745 x 400 x 315 Indoor installation and partially protected places Power supply: methane or LPG Functionality: Connectivity integrated in the boiler HI-Comfort functions AUTO, Comfort, CARE Thermoregulation including CUBE thermostat + external probe Large display, touch interface XtraTech stainless steel heat exchanger General characteristics ONE Series , the new generation of condensing boilers Serie ONE is the new generation of Ariston condensing boilers, studied down to the smallest detail to guarantee maximum performance for a long time. New XTRATECH heat exchanger : Maximum quality. XtraTech is the new exclusive* Ariston stainless steel heat exchanger, the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations. Excellent results, over time. Always connected with Ariston NET Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone. Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET. Absolute efficiency: Thermoregulation in class A+ The ONE condensing boilers achieve very high seasonal performance and thanks to the thermoregulation they reach class A+! Alteas and Genus ONE are also equipped with the innovative IGNITION system, which makes combustion always perfect thanks to the electronic control. Gas transformation? No problem, from the technical menu in one touch. Total Comfort : Innovative functions to satisfy your need ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy. Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance. ALTEAS ONE NET Top of the range condensing boiler, Italian design and integrated connectivity. It represents the perfect combination of excellent performance and innovative design. The front panel in tempered glass, the HI-tech display and integrated connectivity make Alteas the perfect boiler for exclusive furnishing solutions. The efficiency of the boiler combines with the advantages of the Ariston NET service to control your system remotely, keep consumption under control and have peace of mind thanks to a technician who is always by your side. All via a simple free smartphone app! New XtraTech exchanger in exclusive Ariston stainless steel*, with high head Exchanger passage sections +142% compared to the previous version Tempered and scratch resistant glass panel Large display, touch interface Ignition system, electronic combustion control Gas transformation from the technical menu Class A+ in heating, thanks to the Cube thermostat and external probe included as standard Modulation ratio 1:10 Ariston NET connectivity included in the boiler BusBridgeNet® communication protocol AUTO function, Comfort New CARE function, automatic reminder of ordinary maintenance Internal sound absorbing panels Installation in partially protected places Fumes discharge 80, 60, 50 m Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less