The boiler is supplied with methane. Transformation of methane/LPG/Propaned air to be requested in advance from the Authorized Assistance Centre Technical features Model : Divatech D LNC 30 Product code : 0DCC6YWA Power supply: methane / LPG Energy efficiency Heating energy efficiency class: C Sanitary energy efficiency class: A ACS profile : XL Performance Heating nominal heat output : 11.1 ~ 30.0 kW Heat output : 12.6 ~ 33.0 kW Domestic useful thermal power: 30.0 kW Efficiency : 91.0 % Maximum production of domestic hot water Δt 25°C : 17.2 l/min Maximum production of domestic hot water Δt 30°C : 14.3 l/min NOx : 6 Dimensions and weight Dimensions (HxWxD): 700x400x330 mm Empty weight: 30.0 Kg Ferroli boiler DIVATECH D LN LOW NOX Wall mounted boiler with instantaneous domestic hot water production with double exchanger , open chamber, natural draft Strengths - Compact geometry primary heat exchanger entirely in copper - Instantaneous production of domestic hot water with dedicated plate domestic heat exchanger - Standard by-pass - Open chamber and natural draft boiler, with low NOx emission atmospheric burner , in AISI 304 stainless steel - High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity - Can be combined with the modulating remote timer control - Casing painted white by anaphoresis with epoxy powders - Simple and complete control panel, display user interface, with setting keys - Compact dimensions and low weight Advantages of Divatech D LN - Modulating heat input both in heating and in DHW production, managed by an electronic microprocessor card - ECO/COMFORT system for rapid production of domestic hot water - Adjustable post-circulation after the heating phase - Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems - Certified operation also with propane air by means of a specific transformation to be requested from the Authorized Assistance Centre - Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. CERTIFIED OPERATION ALSO ON LPG USING THE SPECIAL KIT TO BE REQUESTED IN ADVANCE FROM THE AUTHORIZED SERVICE CENTER OF THE AREA Ferroli Floorstanding Boiler Bluehelix BK 50 30 kW Methane or LPG complete with Fume Exhaust Kit - New ErP Heating/DHW ERP class A Load profile XXL Thermal capacity (PCI) Min Risc. 6.7 KW Thermal capacity (PCI) Max Risc. 29.5 KW Thermal capacity (PCI) Max San. 32KW Useful thermal efficiency 80°c-60°c Pmax % 98.0 Emission class Nox class 5 Boiler capacity 50 litres Domestic hot water production Δt 30°cl/10 195 Heating working pressure Max bar 3 Max DHW operating pressure bar 9 BLUEHELIX BK 50 > EFFICIENCY, RATIONALITY AND ROBUSTNESS New series of condensing boilers with which FERROLI intends to satisfy the increasingly stringent limits on energy consumption required by recent regulations. The range of generators has been designed with the new AISI 316 TI stainless steel exchanger capable of guaranteeing energy efficiency and performance, both in heating and in the supply of domestic hot water, at the top of their category. The Bluehelix B floor-standing range achieves one of the highest energy efficiency of space heating in its category: ηs 94%. Furthermore, when combined with the external probe and the Romeo remote timer control, it reaches system energy class A+. > PLUS PRODUCT COMPONENTS > Boiler body with the new primary exchanger in very thick Aisi 316 Ti stainless steel > Production of domestic hot water with stainless steel storage tank > Total premix burner in stainless steel > Electronic flame modulation both in heating and DHW > Digital control panel > Can be combined with the modulating remote timer control > Modulating heating pump > Refined design and compact dimensions > Casing painted white by anaphoresis with epoxy powders > 3-star certified comfort in sanitary manufacturing according to EN 13203 > Sliding temperature operation via optional external probe > Digital flame control with three re-ignition attempts in the event of blockage due to lack of flame detection > Arrangement for recirculation attachments > Standard by-pass > It achieves one of the highest seasonal space heating efficiency in its category: ηs 94% (excluding mod. BS 45) > System energy class A+, with the combination of the external probe and the Romeo modulating timer control > COMPONENTS OF THE EXCHANGER Ferroli has directed its research and design towards an exchanger that is simple and robust in its structure, using first-rate materials. STRUCTURE The exchanger consists of a simple spiral, without joints or welds. The generous section of the pipes allows a free, wide passage of the system fluid. The serpentine shape contrasts the deposit of impurities. The tube bundle is unique, without further parallel circuits. Since it is not a collector type exchanger, it is impossible for air bubbles to remain in the meanders of the circuits. Furthermore, any chemical washing of the boiler will take place effectively, as there is no possibility that the descaler pump pushes through a free circuit rather than a clogged one. > TANGIBLE FACTS max consumption standard non-modulating circulator: 0.085 kW max consumption new high efficiency circulator: 0.04 kW Degree days 2500 (average climate zone E) Energy cost: €0.19/kWh * Hypothetical annual expenditure at max standard circulator speed: €40.375 Hypothetical annual expenditure max speed high efficiency circulator: 19 € Therefore, with the replacement of standard boilers with Bluehelix, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W > COMFORT AND SAFETY The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life for the appliance. > SLIDING TEMPERATURE With the installation of the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. > ANTI-LEGIONELLA In order to keep the storage tank in suitable hygienic-sanitary conditions, the product electronics are able to keep it at a temperature of 65°C at programmable time intervals from one to seven days. > ANTI-LOCKING In order to avoid blockage and consequent damage to the heating circulator and the three-way diverter valve, after a set period of inactivity, the boiler electronics activate their operation for a few seconds. > ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. > ECONOMY/COMFORT By activating the appropriate key, heating/temperature maintenance can be excluded by the user (Economy). This makes it possible to reduce fuel consumption during periods of non-use of domestic water. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

BERETTA METEO GREEN AND BOX 30 CNG or LPG CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP Code: 20104067 METEO GREEN E BOX : it is a class A+ system without the addition of options Very high modulation BeSMART comfort control as standard Frost protection down to -15°C as standard Thermoregulation with standard external probe New condensing exchanger in aluminum with high flow rate and front access Specific for use in built-in BOX Low polluting emissions: class 6 (UNI EN 15502) Low consumption modulating circulator head 6m (can be modified up to 7m) IPX5D electrical protection degree Possibility of intubating flues with the special flue in PP ø 60 (up to 23 m) and ø 50 (up to 19 m)* Plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres model 30 E Technical data table: Heating Nominal heat input kW kcal/h 25.00 21500 DHW Nominal heat input kW kcal/h 30.00 25800 Warm-up exercise Maximum pressure bar 3 3 3 Minimum pressure for standard operation bar 0.25 - 0.45 0.25 - 0.45 0.25 - 0.45 Maximum temperature °C 90 90 90 Sanitary exercise: Maximum pressure bar 6 6 - Minimum pressure bar 0.15 0.15 - Dimensions and weight Height - Width - Depth Height - Width - Depth (BOX version) mm 890 - 553 - 274 1223 - 655 - 287 weight kg. 48 Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Baxi condensing boiler mod. EVOlution Prime 30 kW Methane or LPG Complete with fume exhaust kit - ErP Model: EVOlution Prime 30; Typology: Condensation; Installation: Recommended for replacing conventional boilers Performance: DHW nominal heat input kW 31 Heating nominal heat input kW 24.7 Useful thermal power at 30% pot. term. name and low temp.** P1 kW 8 XL load profile Seasonal space heating energy efficiency class A Water heating energy efficiency class A Emissions of nitrogen oxides NOx mg/kWh 40 Minimum operating temperature °C -5 Heating expansion vessel capacity l 8 Heating circuit water temperature adjustment °C 25-80 Sanitary water temperature adjustment °C 35-60 Sanitary water production ΔT 25°C(1) l/min 16.1 DHW circuit minimum water flow rate l/min 2 Minimum heating circuit water pressure 0.5 bar Degree of protection IPX5D Dimensions: Dimensions (hxlxp) mm 700x395x279 EVOlution PRIME Wall mounted condensing gas boilers ideal for replacing conventional boilers The new range of EVOlution PRIME condensing boilers has been equipped with an innovative Baxi patented exchanger. Single Ø 28 mm self-cleaning stainless steel coil, with wide passages. Significant reduction of load losses Greater thermal efficiency Reduction of any deposits and therefore less risk of clogging Ease of maintenance The range of EVOlution PRIME condensing boilers is divided into three models, 26 and 30 kW for heating and instantaneous domestic hot water production: the 26 Mago model is equipped with the Baxi Mago SERIES, while it remains an accessory for the other two models. EVOlution PRIME has been designed in compliance with the requirements of the Ecodesign and Labeling Directives. The labeling regulation (EU Regulation 2017/1369) requires the labeling of products according to a decreasing energy scale that goes from A++ to G and which will pass from A+++ to F from 09/26/2019. The energy class, identified by a letter, expresses a range of efficiency values ​​within which the one expressed by the product in question resides. The label was created to allow the final consumer, by providing true and comparable data, to make informed choices by targeting high-efficiency products. EVOlution PRIME 26 Mago: the advantages with the STANDARD Baxi Mago The EVOlution PRIME 26 Mago boiler is STANDARD equipped with the Baxi Mago, the modulating chronothermostat with integrated Wi-Fi designed to simplify the life of installers, assistance centers and end users, as it allows you to manage domestic comfort directly from an App, via the wifi connection. The advantages of the EVOlution PRIME condensing boiler Easy to install The ultra-compact dimensions 700x395x279 mm and the weight of just 26 kg reduce installation time. The EVOlution PRIME has the same center distances of the hydraulic connections of the conventional BAXI boilers to be replaced. Front access to the electrical connection also speeds up connection times. Lower energy consumption Thanks to the condensing technology, the high efficiency pump and the series of modulating room thermostats available as an accessory. Flexibility in replacement Easy replacement of old standard boilers, thanks to the central flue outlet and the separate adjustable outlet supplied as standard. The coaxial exhaust Ø 60/100 is available as an accessory that can be combined with a pipe extension and a 90° bend diameter 60/100 (adjustable by 360°).Flexibility in replacement Easy replacement of old standard boilers, thanks to the central flue exhaust and the separate adjustable exhaust supplied as standard. The Ø 60/100 coaxial outlet is available as an accessory that can be combined with a pipe extension and a 60/100 diameter 90° bend (360° adjustable). The lower closure kit allows the boiler to adapt to any environment, reducing the visual impact and inserting itself in all the replacement installation contexts. The spacer frame allows the boiler to be moved away from the wall by 40 mm, allowing the passage of the pipes in the rear part of the back panel. This accessory facilitates the replacement of the boiler by eliminating the masonry work. New Baxi patented exchanger with single coil in stainless steel with large water passage sections 8-litre oversized heating expansion vessel Easy to use thanks to the control panel equipped with knobs and backlit LCD display Easy installation thanks to the ultra-compact dimensions (700x395x279 mm - including knobs) and low weight (26 kg) Easy replacement of conventional boilers thanks to central flue gas outlet Modulation range 1:5 greater efficiency and silence Arrangement for combination with the Baxi integrated solar system Ø 80 double drain STANDARD Connection to rigid and flexible Ø 50 mm exhaust pipe: solution for restoring flues - total length (exhaust + intake) 35 meters Connection to pressurized collective flues Boilers running on methane that can be converted to LPG and propane by means of a specific regulation (conversion kit not necessary) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Caldaia Baxi a condensazione NUOVA PRIME 30 completa di Kit Scarico Fumi Metano o Gpl Wi-Fi OPTIONalAL Modello: Prime 30; Tipologia: Condensazione; Installazione: Consigliata per interni; Classe energetica in riascaldamento ErP: A; Classe energetica in produzione di ACS ErP: A; Profilo di carico: XL; Alimentazione: Metano o Natural Gas (G20/G21); Caldaie funzionanti a metano trasformabili a GPL e ad aria propanata mediante apposita regolazione (kit di trasformazione non necessario) Performance : Portata termica nominale sanitario kW 31 Portata termica nominale riscaldamento kW 24,7 Potenza termica nominale sanitario kW 30 Efficienza energetica stagionale del riscaldamento d’ambiente ŋs % 93 Temperatura minima di funzionamento °C -5 Capacità vaso espansione riscaldamento l 7 Regolazione temperatura acqua circuito riscaldamento °C 25-80 Portata minima acqua circuito sanitario l/min 2 Pressione minima acqua circuito riscaldamento bar 0,5 Pressione massima acqua circuito sanitario bar 8 Dimensioni: Dimensioni (h x l x p) mm 700x395x279 Tipo di Gas Metano/GPL/Aria propanata  Caldaie funzionanti a metano trasformabili a GPL e ad aria propanata mediante apposita regolazione (kit di trasformazione non necessario) NUOVA PRIME Ideale per la sostituzione di caldaie convenzionali. La gamma di caldaie a condensazione Prime si articola in due modelli, 26 e 30 kW per riscaldamento e produzione istantanea acqua calda sanitaria. Prime è stata progettata rispettando i requisiti delle Direttive Ecodesign e Labelling. Il regolamento sull’etichettatura (Regolamento UE 2017/1369) richiede di etichettare i prodotti secondo una scala energetica decrescente che va dalla A++ alla G e che passerà dalla A+++ alla F dal 26/09/2019. La classe energetica, identificata da una lettera, esprime un intervallo di valori di efficienza entro il quale risiede quello espresso dal prodotto in esame. L’etichetta nasce per consentire al consumatore finale, fornendo dati veri e comparabili, di fare scelte consapevoli indirizzandosi su prodotti ad alta efficienza. I vantaggi della caldaia a condensazione Prime Facile utilizzo grazie al pannello di controllo dotato di manopole e display LCD retroilluminato Facile installazione grazie alle dimensioni ultracompatte (700x395x279 mm - incluse manopole) e al peso contenuto (26 kg) Facile sostituzione di caldaie convenzionali grazie allo scarico fumi centrale Campo di modulazione 1:5 maggiore efficienza e silenziosità Predisposizione per abbinamento con il sistema solare integrato Baxi Scarico sdoppiato Ø 80 di serie Allacciamento a tubo di scarico Ø 50 mm rigido e flessibile: soluzione per risanamento canne fumarie - per il mod. 26 kw lunghezza totale (scarico + aspirazione) 35 metri Allacciamento a canne fumarie collettive in pressione Caldaie funzionanti a metano trasformabili a GPL e ad aria propanata mediante apposita regolazione (kit di trasformazione non necessario) Sistema idraulico Valvola deviatrice a tre vie elettrica Bruciatore a premiscelazione in acciaio inox Scambiatore acqua/fumi in acciaio inox Scambiatore sanitario in acciao inox Ventilatore modulante a variazione elettronica di velocità By-pass automatico Pompa di circolazione ad alta efficienza Sistema antibloccaggio pompa e valvola a tre vie che interviene ogni 24 ore Valvola di sicurezza circuito riscaldamento a 3 bar Vaso espansione da 7 litri Sistema di termoregolazione Predisposizione per il collegamento ad un impianto a zone Abbinamento a termostato/cronotermostato modulante Sistema di controllo Termostato di sicurezza contro le sovratemperature dello scambiatore acqua/fumi Pressostato idraulico che blocca il gas in caso di mancanza d’acqua Sonda NTC di sicurezza contro le sovratemperature dei fumi Controllo temperature mediante sonde NTC Dispositivo antigelo totale Termometro elettronico Manometro circuito riscaldamento Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE, MA PRESENTA AMMACCATURE AD ENTRAMBI I LATERALI, AMMACCATURA SULLA PARTE FRONTALE IN PROSSIMITÀ DEL PANNELLO DI COMANDO, SONO STATE INSERITE VITI NON DI SERIE INTERNAMENTE E L'IMBALLO È USURATO (PER MAGGIORI INFORMAZIONI SUI DANNEGGIAMENTI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE). Caldaia a Camera Aperta Chaffoteaux Pigma Ultra 30 CF Low NOx Metano cod. 3310638 - NEW ErP Classe di efficienza energetica per la produzione di acqua calda B Profilo di carico XL Codice prodotto 3310638 Potenza termica nominale max/min  29,5/ 13 kW Capacità vaso d’espansione 8l Potenza termica nominale max/min (sanitario) PCI 29,5/ 13 kW Portata acqua calda a ΔT 25º C 15,8 l/min Classe NOx 6 Tensione di alimentazione 230 V~ (50 Hz) Grado di protezione elettrico IP X4D Dimensioni AxLxP 745x400x319 mm PIGMA ULTRA Grazie alla dimensioni compatte, al comfort sanitario garantito dalle 2 stelle di prestazione e alla tecnologia del display digitale, che consente una gestione ottimale del riscaldamento, riesce a creare un ambiente confortevole, adatto ad ogni tipo di esigenza e d‘installazione. Basse emissioni di NOx: conforme alla normativa Erp del 26.09.2018 COMFORT SANITARIO Scambiatore sanitario in acciaio inox. Prestazioni di acqua sanitaria **, secondo la norma EN 13203. Portata da 14,2 a 15,8 l/min con ΔT = 25ºC. Produzione di ACS controllata gestita da due sonde e un flussimetro sanitario per una migliore stabilità della temperatura in base al tipo di prelievo. Funzione comfort on/off programmabile COMFORT NEL RISCALDAMENTO Funzione SRA, sistema automatico di regolazione della caldaia in funzione dei requisiti di riscaldamento. Circolatore alta efficienza con modulazione continua per migliorare il comfort acustico e ridurre i consumi energetici. Termoregolazione climatica differenziata di 2 circuiti, in funzione della temperatura ambiente e/o esterna. Predisposizione per l’integrazione in un sistema di riscaldamento tramite il nuovo protocollo di comunicazione Ebus2 (caldaie, solare, moduli gestione impianto e accessori di termoregolazione modulanti). Display LCD con visualizzazione: storico, autodiagnosi, temperature di funzionamento. COMFORT D'USO E INSTALLAZIONE Compatibile con Expert Control: gestore di sistema intuitivo per la gestione di 3 circuiti, in funzione della temperatura ambiente e/o esterna per un maggior comfort e un maggior risparmio energetico. Nuove connessioni elettriche intuitive. Avviamento più facile: funzione di spurgo automatico e regolazione della combustione accessibile direttamente. Compatta e perfettamente adattabile a qualunque tipologia di abitazione. RISPARMIO ENERGETICO E RISPETTO DELL'AMBIENTE Fino al 15% di risparmio energetico in combinazione con Expert Control, sonda ambiente modulante e funzione SRA. Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Overview SAVIO evoDENS HE 30S* CONDENSING BOILER COMPLETE WITH KIT FOR LPG LPG FUMES EXHAUST - NEW ErP Technical specifications Model:ÿevoDENS HE Product codeÿLPG: 103041010000 Product codeÿLPG: 103141009000 Technical features: Heating/sanitary nominal heat inputkWÿ25.0 / 30.0 Yield name 60ø/80øC * %ÿ97.0 Yield min. 60ø/80øC * %ÿ93.6 NOx class no. 6 Minimum / maximum heating temperature****øC 25 / 80 Minimum / maximum heating pressurebar 3.0 / 0.3 Capacity of the expansion vessel (total / useful) l 7.0 / 3.5 Maximum flow rate (T=25 K) / (T=35 K) l/minÿ16.7 / 11.9 Specific sanitary flow rate (T=30 K) ***** l/minÿ13.9 Voltage / Power at nominal heat input V~/ W 230/100 Power at rest (stand-by) W 5 Degrees of protection nø IPX5D Dimensions HxWxDÿmm 700x400x290; 32.7Kg Boiler water content l 2 Main features EvoDENS HE The new range of wall-mounted condensing boilers: excellent performance thanks to the new heat exchanger Evodens HEÿis the new SAVIO range ofÿwall-mounted condensing boilersÿ: excellent performance thanks to the new heat exchanger and ease of use thanks to the digital control panel with large displays. Available in versions for heating and domestic hot water production and for heating onlyÿEvodens HEÿpresents a complete range of powers, 25 and 35 kW combi models and 25 and 35 SV models, in the same extremely compact dimensions (700 x 400 x 290 mm).ÿ Evodens HEÿhas the strong point in the innovative heat exchanger designed to provide high yields that last in the digital control panel, designed to communicate with the user in an easy and comfortable way. Like the entire SAVIO condensing range, ÿEvodens HEÿallows you to obtain maximum savings from climatic thermoregulation, based on the system in which the boiler is installed. MAIN FEATURES: High yields (in compliance with yield directive 92/42ÿCEE and Legislative Decree 311/06) Sanitary comfort( EN 13203) Primary condensing exchanger in stainless steelÿwith aluminum linings to offer maximumÿresistance to corrosion Total premix burner, built in stainless steel (Class NOx 5) Modulation 1:10 Methane also LPG Sanitary plate heat exchanger in stainless steel 7 liter expansion tanks High efficiency PWM pump with low power consumption variable speed Maximum power adjustable according to the system Degrees of protection IPX5D Can be installed in a partially protected place Integration with Savio solar systems, using a solar kit Innovative digital control panel Digital pressure reading Arrangement for remote control of external probe Possibility of managing a zone valve by means of a remote control in the case of multi-zone systems. High circulation single coil primary exchangerÿSavi produces the new Steelcoil compound exchanger with a stainless steel spiral enclosed in an aluminum shell. Thanks to the large exchange surface of the coil, greater thermal efficiency is guaranteed with less loss of charge and easier cleaning. The ease of cleaning and the sturdiness of this exchanger are one of the main strengths of the product which can be used on new systems but also on old systems in the case of renovations. Steelcoil integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the monspira. Does the absence of parallel circuits guarantee an easy cleaning operation? of the exchanger and the elimination of any air present in the system circuit. CONTROL PANEL Summer/winter/off selector Heating temperature regulator Sanitary temperature regulator Digital pressure reading Domestic hot water and heating temperature visualization from the display Display of fault diagnostics, fault history block status Refill ViewÿRecommended Refill Guide Display of months remaining until annual maintenance is due External temperature displayÿ(with external probe connected) andÿindication of external probeÿconnected and K value set Flame modulation display Visualization of SavioÿSOLCONTROL solar control unit connected to EVODENSÿHE, active solar pump and solar integration DHW comfort functionÿselectable by means of a dedicated keyÿand programmable Ingressdirectl the INFO menu dedicated to the user. Thermoregulation By connecting the external probe and the remote control (optional) directly to the boiler, climatic regulation can be used. EVODENS HE will adapt the water temperature of the system to the external climatic conditions, guaranteeing the achievement of the desired room temperature without waste and optimizing consumption. By using climatic regulation, the regulation efficiency also rises, giving greater value to your home. Ecodesign directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. Shipping From the day payment is received, the product will be shipped within 3 working days. Free insured shipping for Italy. Shipping will take place via one of the national carriers

Read more less

Easy to use thanks to the control panel equipped with knobs and backlit LCD display • Easy installation thanks to ultra-compact dimensions (700x395x279 mm – including knobs) and low weight (26 kg) • Easy replacement of conventional boilers thanks to central flue gas outlet • Modulation range 1:5 greater efficiency and silence • High efficiency circulation pump • Arrangement for combination with the Baxi integrated solar system • Ø 80 double exhaust as standard • Connection to rigid and flexible Ø 50 mm exhaust pipe: solutions for restoring flues, total length (exhaust + suction) 40 meters • Connection to pressurized collective flues • Boilers running on methane that can be converted to LPG and propane air by means of a specific regulation (conversion kit not necessary ) TECHNICAL FEATURES – Installation type: B23-B23P-B33-C13-C33-C43-C53-C63-C83-C93 – DHW nominal heat input: 20.9 kW – Sanitary nominal thermal power: 30 kW – Nominal heating heat input: 24.7 kW – Heating rated thermal power 80/60°C: 24 kW – Heating rated thermal power 50/30°C: 26.1 kW – Reduced thermal power 80/60°C : 5.6 kW – Reduced thermal power 50/30°C: 6 kW – Efficiency at 30%: 105.8% – Nominal efficiency 80/60°C: 97.5% – Nominal efficiency 50/30°C: 105.8% – Seasonal space heating energy efficiency class: A – Seasonal energy efficiency class of the sanitary fixture: A – Water heating – Load profile: XL – NOx class 5 – Domestic hot water production: ∆T 25°C: 13.8 l/min – Category II2HM3B/P appliance operating on gas type G20 – G230 – G30 – G31 – Electronic ignition with flame ionization control – Degree of protection: IPX5D – Primary water/gas coil exchanger in AISI 316L stainless steel – Secondary water/water exchanger in stainless steel – Electric 3-way diverter valve – Modulating fan with electronic speed variation – Automatic by-pass on the heating circuit – Digital and analog pressure gauge on the heating circuit – Heating expansion tank with capacity 7 l and preload 0.8 bar – High efficiency ErP full modulation circulation pump with built-in deaerator – Hall effect DHW flowmeter for detecting hot water withdrawal – DHW operation with minimum water pressure of 0.15 bar and minimum flow rate of 2 l/min. – Inspectable filter on loading water inlet – Primary circuit safety valve at 3 bar – Heating water temperature adjustment range: 25÷80°C – Domestic water temperature adjustment range (in the case of combination with a boiler): 35÷60°C – Minimum operating temperature: – 5°C – Dimensions hxwxd: 700 x 395 x 279 mm – Weight 26kg CONTROL SYSTEM – Temperature control using NTC probes – Pump post-circulation in heating function – Safety thermostat against overheating of the water/fumes exchanger – Hydraulic pressure switch which blocks the gas in case of water shortage – Pump electronic control blocked – Pump anti-blocking system and 3-way valve which intervenes every 24 hours – NTC safety probe against fume overheating – Total antifreeze device which intervenes with temperatures below 5°C – Electronic thermometer – Display of heating circuit pressure on control panel   THE ADVANTAGES OF PRIME EASY TO INSTALL The ultra-compact dimensions 700x395x279 mm and the weight of just 26 kg reduce installation time. The new Prime has the same distance between centers of the hydraulic connections of the conventional BAXI boilers to be replaced. Front access to the electrical connection also speeds up connection times. The fixing bracket supplied as standard and the visible hooks facilitate wall mounting.       LOWER ENERGY CONSUMPTION Thanks to the condensing technology, the high efficiency pump and the series of modulating room thermostats available as an accessory. The new regulation 7129-3:2015 prescribes the possibility of creating collective flues in positive pressure only for type C condensing appliances. It is possible to connect to a collective flue in positive pressure only appliances declared suitable by the manufacturer for this application and equipped with a non-return device (clapet), designed to prevent the combustion products from flowing out through appliances connected and temporarily switched off; the smoke non-return valve is an integral part of the appliance.         THE REGULATION 7129-3:2015 Regulation 7129-3:2015 prescribes the possibility of creating collective flues in positive pressure only for type C condensing appliances. Only devices declared suitable can be connected to a positive pressure collective flue by the manufacturer for this application and equipped with a non-return device (clapet), designed to prevent the products from combustion to flow through appliances connected and momentarily switched off; the smoke non-return valve is part component of the appliance.     CLAPET (SMOKE NON-RETURN VALVE) Included in the duct downstream of the air-gas group fan.           CONNECTED TO COLLECTIVE PRESSURIZED FLUES Thanks to the integrated flue non-return valve (clapet), Prime is designed for connection to pressurized collective flues.                           SMOKE PIPES Ø50 MM Possibility of restoring flues with Ø50 mm exhaust hose (up to 40m of exhaust)     FLEXIBILITY IN THE REPLACEMENT Easy replacement of old standard boilers, thanks to the central flue outlet and the separate adjustable outlet supplied as standard.   The Ø 60/100 coaxial drain is available as an accessory that can be combined with a pipe extension and a 60/100 diameter 90° elbow (360° adjustable).   To facilitate replacement in installations where space is limited (flue gas outlet at the rear of the boiler), the new accessory is available with a lowered coaxial 90° bend.   For more information, download the following documentation: PRIME 24 TECHNICAL DRAWINGS     NEW COMBUSTION GROUP The Prime combines the performance of the stainless steel exchanger with the advantages of a new generation burner integrated with an innovative cold closing door.       The new cylindrical burner ensures greater thermal and acoustic comfort, and reduced NOx and CO emissions thanks to greater flame stability. The new cold door reduces losses by 75% with surface temperatures below 20°C, guaranteeing significant savings in stand-by and during operation, speeding up maintenance, as there is no need to wait let it cool down.

Read more less

Ferroli condensing boiler Bluehelix Tech RRT 30 H Heating only METHANE OR LPG Complete with flue gas kit - New Technical features: ERP Class (Class G - A++) A Heating max / min heat input (Hs) kW 30.6 / 6.4 Max / min heat output heating (80/60°C) kW 30 / 6.3 Max / min heat output heating (50/30°C) kW 32.5 / 6.9 Efficiency Pmax / Pmin (80-60°C) (Hi) % 97.9 / 98.0 Efficiency Pmax / Pmin (50-30°C) (Hi) % 106.1 / 107.5 Efficiency 30% 109.5 Max / min heating pressure bar 3 / 0.8 Empty weight kg 28 No. of pieces/pallet no. 12 CNG/LPG CODE 0T3D2BWA STRENGTHS: With attention to aesthetics and silence, it continues the tradition of appreciation of the previous "Bluehelix" series Boiler with thick stainless steel primary exchanger, with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt. A+ System: in combination with the modulating remote control and the external probe (optional) it reaches the upper efficiency class A+ (scale from G to A+++) MC2: Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) MGR: Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits MGR: Methane: LPG, Propane air Ready through a simple configuration the boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits Exclusive exchanger-burner system with self-cooled door: simplifies maintenance and reduces its cost thanks to fewer parts to replace Sanitary production in combination with storage tank (optional), standard 3-way valve in the boiler Hydraulic connections covered by the boiler casing Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass BENEFITS OF BLUEHELIX TECH RRT H: Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard Designed to simplify and facilitate normal maintenance and cleaning operations Minimum polluting emissions (class 6 according to EN 15502-1) Sliding temperature operation via optional external probe Low consumption modulating heating pump (ErP Ready - Class A) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (methane model) Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the aid of the optional antifreeze heater kit Free methane/LPG/propaneted air transformation when checking the product and activating the warranty, to be requested from the Authorized Assistance Center The warranty on this item is 24 months from the date of purchase.

Read more less

Overview RIELLO FAMILY CONDENS 3.0 KIS METHANE CONDENSING BOILER COMPLETE WITH FUME KIT + BUILT-IN UNIT - NEW ErP 2015: Family Condens is a technologically advanced wall-mounted built-in boiler that allows you to have the special Family functions in the concealed built-in unit. Technical specifications Product code:ÿ20102941 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitaryware energy efficiencyprofilXL Class A Characteristics of heating/sanitary exercises: Firebox thermal power (heating)ÿmin-max: 3.2ú25ÿkW Useful thermal power (sanitary) min-max: 3.2ú30ÿkW Energy efficiency(92/42/CEE)ÿ**** Efficiency at Pn* (50øC-30øC): 106.8% Profitability 30% (47ø return): 109.9% Sealed chamber, forced drafts Quantity of hot water at t 25°C: 17.2 l/min Minimum domestic water flow rate: 2ÿl/min Dimensions (hxwxd) mm 797 x 553 x 268ÿ; 42 kgs Built-in dimensions (hxlxp) mm 1223 x 654 x 281; 21kg Electrical protection degrees: IP X5D NOx class: 5 Power supply: METHANEÿ Complete with built-in unit code ÿ20082310 Features list FAMILY IN CONDENS Efficiency****ÿ Low polluting emissionsÿ Aluminum condenser, with premix burnerÿ Models for combined instantaneous and accumulation heating For built-in installations Family In Condens a built-in wall mounted boiler that allows you to have the special Family functions in the concealed built-in. The new primary heat exchanger completely made of aluminum with frontal accessibility to the combustion chamber guarantees better efficiency and duration. It is available with powers from 3.2 to 30 kW. Features:ÿ Modulation ratio 1:10 (minimum power 3.2 kW) which allows the boiler to respond to all heat requestsÿ Modulating circulator, low consumption(IEE0,20)ÿ 3 Stars in sanitary comfort according to EN 13203ÿ Family Remote Control, supplied as standard, allows management of all boiler functions directly from inside the homeÿ Antigelfine -15øCÿ Remote alarm system which allows remote signaling of the boiler lockout statusÿ Special Family functions: TastBenessere, TastMemory, Touch&Go function Smart Fillsÿ Standard external probe. ÿTheÿFAMILY Remote Control kitÿ (remote control panel) is the instrument that allows you to manage the boiler remotely. The panel controls the boiler, storage tank and room temperatures, monitors and supervises the operating regimes, activation times and signals any anomalies. The remote control panel can be configured as: Chronothermostatÿ (factory con guration): it will operate according to the standard heating program according to the personalized one. In this con guration the control panel tries to keep the room at two temperature levels (comfort and reduced), switching from one to the other at times established by the user. Thermostat: the heating is activated when the temperature detected by the room probe (contained in the control panel) is lower than the one set regardless of the memorized heating programme. ErP: Energy related Products ErP the acronym for Energy related Products? (products connected to the use of energy) and the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design (or eco-design?). The scope of action of this European Directive is extremely broad since up to now it has affected products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 they will also apply to heating products and the production of domestic hot water. Also from the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community is necessary to allow the full transposition of the contents by companies and market players. The regulations issued require that all products intended for heating and/for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an ÿenergy labelÿ that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the introduction of the product from the factories to the market. All the products previously introduced, for example present near distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product, to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as well as those on air conditioners, the efficiency data reported for the average climatic zone. In addition to product energy labels, European regulations have also provided for the creation of a "system label" in the case of building a plant in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will allow the creation of systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/operates the system (sellers-installers); but this faculty is also granted to builders. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

SAUNIER DUVAL MASTER 4 CONDENSING 30 kW COMPLETE WITH FUME EXHAUST KIT - NEW ERP Model: ErP efficiency class in heating/DHW: A Sanitary load profile: XL Type: Heating and domestic hot water Combustion chamber: sealed Domestic hot water production technology: AquaspeedPLUS® Heating Nominal power P min/max heating 80/60 °C: kW 6.1/25.0 Partial load efficiency 30% 40/30 °C %: 109 Sanitary Rated power min/max (60 °C): kW 6.1/30.6 Specific flow rate (∆T=25 K): l/min 17 Continuous flow rate (∆T=30 K): l/min 21 Min/max DHW temperature: 45 / 65 °C Electrical characteristics Total absorbed electric power: W 140 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (h x w x d): 892 x 470 x 570 mm CNG code (G20) - 10017336 METHANE version MASTER 4 CONDENSING The Master 4 Condensing boilers boast exceptionally low consumption and are positioned at the top of the category both in terms of sanitary comfort and efficiency thanks also to the exclusive Aquaspeed PLUS® system for the production of domestic hot water. The range includes two models of 30 kW and 35 kW. Characteristics Energy classification 4 stars **** (92/42/EEC) with yields up to 109.2%; Sanitary comfort 3 stars *** (EN 13203-1), thanks to the exclusive Aquaspeed PLUS® technology with sanitary stainless steel plate exchanger and double dynamic accumulation (42 litres). User interface with backlit digital display: the keys and symbols used allow the user to conveniently select the desired functions and temperatures and to use them simply and immediately. Solar Easy: all models in the Master 4 Condensing range are compatible with all solar systems. If solar radiation is not sufficient to keep the domestic water at the desired temperature, the boiler intervenes as an integration. Silent operation, modern design and compact dimensions make all Master 4 Condensing models perfect both for new systems and for replacement in existing systems, thanks also to a complete range of hydraulic accessories. Domestic hot water production (DHW) according to EN13203 up to 23 l/min Peak flow rate in the first 10 min. up to 276 litres Low NOx emissions - class 5 (EN 483) Total premix burner and primary heat exchanger in anti-corrosion stainless steel High efficiency and modulating circulator Heating system antifreeze function Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview SAVIO evoDENS HE 30S* CONDENSING BOILER COMPLETE WITH KIT FOR LPG METHANE FUME EXHAUST - NEW ErP Technical specifications Model:ÿevoDENS HE Product codeÿLPG: 103041010000 Product codeÿMETHANE: 103141009000 Technical features: Heating/sanitary nominal heat inputkWÿ25.0 / 30.0 Yield name 60ø/80øC * %ÿ97.0 Yield min. 60ø/80øC * %ÿ93.6 NOx class no. 6 Minimum / maximum heating temperature****øC 25 / 80 Minimum / maximum heating pressurebar 3.0 / 0.3 Capacity of the expansion vessel (total / useful) l 7.0 / 3.5 Maximum flow rate (T=25 K) / (T=35 K) l/minÿ16.7 / 11.9 Specific sanitary flow rate (T=30 K) ***** l/minÿ13.9 Voltage / Power at nominal heat input V~/ W 230/100 Power at rest (stand-by) W 5 Degrees of protection nø IPX5D Dimensions HxWxDÿmm 700x400x290; 32.7 Kgs Boiler water content l 2 Main features EvoDENS HE The new range of wall-mounted condensing boilers: excellent performance thanks to the new heat exchanger Evodens HEÿis the new SAVIO range ofÿwall-mounted condensing boilersÿ: excellent performance thanks to the new heat exchanger and ease of use thanks to the digital control panel with large displays. Available in versions for heating and domestic hot water production and for heating onlyÿEvodens HEÿpresents a complete range of powers, 25 and 35 kW combi models and 25 and 35 SV models, in the same extremely compact dimensions (700 x 400 x 290 mm).ÿ Evodens HEÿhas the strong point in the innovative heat exchanger designed to provide high yields that last in the digital control panel, designed to communicate with the user in an easy and comfortable way. Like the entire SAVIO condensing range, ÿEvodens HEÿallows you to obtain maximum savings from climatic thermoregulation, based on the system in which the boiler is installed. MAIN FEATURES: High yields (in compliance with yield directive 92/42ÿCEE and Legislative Decree 311/06) Sanitary comfort( EN 13203) Primary condensing exchanger in stainless steelÿwith aluminum linings to offer maximumÿresistance to corrosion Total premix burner, built in stainless steel (Class NOx 5) Modulation 1:10 Methane also LPG Sanitary plate heat exchanger in stainless steel 7 liter expansion tanks High efficiency PWM pump with low power consumption variable speed Maximum power adjustable according to the system Degrees of protection IPX5D Can be installed in a partially protected place Integration with Savio solar systems, using a solar kit Innovative digital control panel Digital pressure reading Arrangement for remote control of external probe Possibility of managing a zone valve by means of a remote control in the case of multi-zone systems. High circulation single coil primary exchangerÿSavi produces the new Steelcoil compound exchanger with a stainless steel spiral enclosed in an aluminum shell. Thanks to the large exchange surface of the coil, greater thermal efficiency is guaranteed with less loss of charge and easier cleaning. The ease of cleaning and the sturdiness of this exchanger are one of the main strengths of the product which can be used on new systems but also on old systems in the case of renovations. Steelcoil integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the monspira. Does the absence of parallel circuits guarantee an easy cleaning operation? of the exchanger and the elimination of any air present in the system circuit. CONTROL PANEL Summer/winter/off selector Heating temperature regulator Sanitary temperature regulator Digital pressure reading Domestic hot water and heating temperature visualization from the display Display of fault diagnostics, fault history block status Refill ViewÿRecommended Refill Guide Display of months remaining until annual maintenance is due External temperature displayÿ(with external probe connected) andÿindication of external probeÿconnected and K value set Flame modulation display Visualization of SavioÿSOLCONTROL solar control unit connected to EVODENSÿHE, active solar pump and solar integration DHW comfort functionÿselectable by means of a dedicated keyÿand programmable Ingressdirectl the INFO menu dedicated to the user. Thermoregulation By connecting the external probe and the remote control (optional) directly to the boiler, climatic regulation can be used. EVODENS HE will adapt the water temperature of the system to the external climatic conditions, guaranteeing the achievement of the desired room temperature without waste and optimizing consumption. By using climatic regulation, the regulation efficiency also rises, giving greater value to your home. Ecodesign directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. Shipping From the day payment is received, the product will be shipped within 3 working days. Free insured shipping for Italy. Shipping will take place via one of the national carriers

Read more less