ATTENTION THE BOILER WILL BE SUPPLIED WITH METHANE. FOR LPG OPERATION, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE SIME open chamber boiler VERA 25 OF Methane Low NOx - ErP Technical features. ENERGY PERFORMANCE Seasonal heating energy efficiency class C Seasonal heating energy efficiency % 78.4 Heating sound power dB (A) 59 Sanitary energy efficiency class A Sanitary energy efficiency % 80.3 Declared load health profile XL HEATING PERFORMANCE Heating adjustment range °C 20/80 Water content in the boiler l 3.15 Max working pressure bar 3 Max operating temperature °C 85 Expansion vessel capacity l 8 HEALTHCARE PERFORMANCE Nominal heat input kW 23.0 Reduced heat input kW 10.0 DHW adjustment range °C 10/60 Specific sanitary flow rate (EN 13203) l/min 10.0 Continuous DHW flow (∆t 25/35°C) l/min 12.3/8.8 DHW flow rate min l/min 2.2 Sanitary pressure min/max bar 0.4/7.0 DIMENSIONS Dimensions HxWxD mm 700x400x250 VERA OF Latest generation low NOx boiler for open chamber heating and domestic hot water production. The retroactive combustion control with electronic gas valve guarantees higher overall efficiency and lower running costs. Low NOx wall mounted boiler for heating and instantaneous hot water production Installation type: B11BS NOx emission class 6 Natural draft smoke outlet Microprocessor electronic card with automatic adjustment of ignition power and maximum heating Automatic ignition with flame ionization control Degree of electrical protection to water IP X4D Low NOx atmospheric burner Sanitary plate heat exchanger in stainless steel Heating system expansion tank Motorized diverter valve Retroactive combustion control with electronic gas valve High efficiency system pump with low energy consumption (ErP) Double element heating probe with safety thermostat functions Fume safety device which interrupts the gas flow to the burner in the event of an obstructed flue and/or lack of draught 3 bar system safety valve Anti-blocking function of the pump and the diverter valve which activates automatically every 24 hours if there have been no requests for heat Antifreeze function which activates automatically if the water temperature in the boiler drops below the value set for the parameter "tS 1.0" and, in the presence of an external probe, if the outside temperature drops below the value set for the parameter "tS 1.1” Chimney sweep function which lasts 15 minutes and facilitates the task of qualified personnel for measuring the parameters and combustion efficiency and for checking the gas pressures at the nozzles Control panel equipped with display with numerical code self-diagnosis Knobs for adjusting the heating and domestic hot water temperatures Arrangement for SIME HOME remote control connection (optional) Protection of hydraulic fittings to be placed under the boiler cod. 8094531(optional) Integrated climatic regulation Hydraulic pressure switch which blocks the boiler in the event of a water shortage Manual device for filling the system Water pressure control hydrometer Suitable for operation in a partially protected place according to EN 15502, with a maximum ambient temperature of 60 °C and a minimum of - 5°C Connections to the system in brass (DIN) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal heat input: 25 kW Classification European Directive EEC 92/42: **** Quantity of hot water with Δt=25°C: 14 l/min Dimensions (hxlxp) mm 780 x 400 x 336 METHANE power supply Legend: C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control) Exclusive services: Mynute Sinthesi - ErP Mynute Sinthesi by Beretta is a wall-mounted condensing boiler for high temperature single-family systems. Continuous electronic modulation of the gas antifreeze device as standard (up to 0°C). Environmental Self-Regulation System (SARA). Mynute Sinthesi keeps all the peculiarities of the Mynute range unchanged but evolves towards new needs. The boiler is equipped with a heat recovery unit on the fumes and combustion in a sealed chamber; this makes it possible to obtain very high performance in terms of efficiency and therefore significant energy savings. Mynute Sinthesi therefore represents the ideal solution both in the first installation and in the replacement. Characteristics: ErP boilers with 6 m low consumption circulator (EEI≤0.20) Specific for high temperature systems Condensing post exchanger in aluminum alloy IPX5D electrical protection degree Environmental Self-Regulation System (SARA) Hydraulic connections cover (optional) Template, plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres Beretta is “ERP”. The concrete commitment towards an eco-sustainable future The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations issued at the same time for the energy labeling of products to supplement the corresponding Directive 2010/30/EU will also become effective. The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands. In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual appliances. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Overview CHAFFOTEAUX ALIXIA GREEN 25 S LPG EU CONDENSING CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT -NEW ErP Technical specifications Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Features of exercisesHEATING: Energy Category: Condensation Nominal Thermal Output mx/min (Hi): 22 / 5.5 kW Outlet temperature range min/max temp High: 35/85 Cø Outlet temperature ranges min/max temp High: 20/45 Cø Capacity of the expansion vessel: 8 litres Maximum water capacity of the system Features of exercises DOMESTIC HOT WATER: LevelComfort DHW (EN 13203): *** Hot water flow rate at T 25ø: 14.5 l/min Hot water flow rate at T 35ø: 10.4 l/min DHW temperature range: 40/65 Cø EMISSIONS: Minimum suction: 137 Pa Excess air: 27% Nox class (Nox PonderatMg/kWh) G20: 5 ELECTRICAL DATA: Supply Voltage/Frequency V/Hz: 230/50 Max Supply/Gas Pressure: 20 mbar DIMENSIONS AND WEIGHT: Height x Width x Depth mm: 745 x 400 x 307 ; 32 kgs Main features ÿALIXIA GREEN 25 YES The new compact condensing boiler with stainless steel condensing exchanger and prepared for connection to a heating system via the Ebus communication protocol. Can be installed in partially protected places. OperationsolGPL. Sanitary comforts Sanitary heat exchanger in stainless steel. Domestic hot water performance ***, maximum level not foreseen by the EN 13203 standard Flow rate from 14.5 to 19.3 l/min with T = 25 Cø Heating comfort Efficiencyfinal 109% with energy savingsfinal 35%. 4-star combustion efficiency according to the EN 92/42 standard. Modulation wide range, from 25% to 100% of the maximum power. Reduced polluting emissions, NOx class 5. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption Differentiated climatic thermoregulation of 2 circuits, according to the room and/or outside temperatureÿ Arrangement for integration into a heating system via the Ebus communication protocol Backlit LCD display with display: history, self-diagnosis, operating temperatures Convenience of installation use Compatible with Expert Control:ÿintuitive system manager for the management of 3 circuits, depending on the ambient and/or outside temperature for greater comfort and greater energy savings Intuitive electrical connections Easier starting: the automatic purge function and directly accessible combustion adjustment Can be installed in partially protected places ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT Final 25% energy savings in combination with Expert Control and the SRA function Final 35% energy savingscombinandExpert Control, SRA function, external probe and radiant floor 40% reduction in CO2 emissions Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Technical features Product code: 3310501 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Nominal heat output max/min heating (Hi) Qn 22/2.5 kW Useful heating power 80º C/ 60º C max/min 21.5/2.4 kW Efficiency at 30% of nominal power (47 Hi return) 97.8% Maximum heating pressure/safety valve setting 3/3.0 bar Capacity of the expansion tank 8 l Performance Stars **** Sanitary max/min rated thermal power (60/80ºC) PCI 25/ 5.5 kW Sanitary specific flow rate in compliance with EN 625 at Δt 30ºC 13.2 l/m Hot water flow rate at ∆T 25º C l/m 14.6 NOx class 5 Electrical protection degree IP X5D Dimensions: HxWxD 745 x 440 x 375; 42 kgs General characteristics URBIA GREEN LINK EU Reliable, designed to guarantee the best performance with minimum consumption and easy to manage, even remotely with your smartphone: Urbia Green Link by Chaffoteaux is the latest novelty in the field of efficient heating. Not a simple condensing boiler but a real advanced package that combines the efficiency of the new Urbia Green EU with the connectivity kit that allows the control and management of the entire system. A solution that reduces consumption by up to 40% * and obtains the advantageous tax deductions of 65% , envisaged for the purchase and installation costs of home automation systems and therefore concerning the cost of the boiler but also that of accessories and labour. In this way, just over two years are enough to recover the investment linked to the new heating system. The brain of the Chaffoteaux system is represented by the Expert Control Link chronothermostat, powered directly by the boiler and connectable to the Wi-Fi network to activate the assistance and remote control functions. It is thus possible to manage the switching on and off and the regulation of the main functions with the dedicated Chaffolink App but also to activate a remote assistance service for scheduled maintenance, remote repairs and real-time notification of any problems. In the event of a malfunction, the technician who will work on the boiler will always know the real problem in advance and the time needed to solve it, thus avoiding unnecessary site visits. The monitoring of daily, weekly and monthly consumption - from Expert Control or directly from the App - also allows you to check how much energy is used for heating and how much for domestic hot water, thus optimizing boiler management. Among the pluses of Chaffoteaux technology: the 4-litre micro-accumulator , which makes hot water immediately available, a constant report of energy consumption and the SRA function for automatic regulation of boiler parameters based on environmental conditions. Chaffoteaux Urbia Green Link is available in versions with 25 and 35 kW condensing boiler. > HEALTH COMFORT Integrated mini-accumulator in 316L stainless steel of 4 liters. Domestic hot water performance ***, maximum level foreseen by the EN 13203 standard. Flow rate from 14.6 to 19.3 l/min with ΔT = 25ºC. DHW production controlled by a modulating turbine to respond to needs without waiting times and at a constant temperature, even when extractions are very limited. DHW programmer to control the tank heating time slots Eco-Delta System: DHW filling system with 4-litre reserve to further improve the comfort of DHW production and new ecological functions which allow energy savings in DHW mode. > MAXIMUM COMFORT IN HEATING Through the free APP and the connectivity service you can constantly monitor the room temperature and manage the boiler parameters. Efficiency up to 108% with energy savings up to 35%. 4-star combustion efficiency according to EN 92/42 standard. Wide modulation range, from 10% to 100% of the maximum power. Reduced polluting emissions, NOx class 5. Heating circuit pressure sensor with visualization on LCD display. SRA function, automatic boiler regulation system according to heating requirements. Differentiated climatic thermoregulation of 2 circuits, according to the ambient and/or external temperature. Arrangement for integration into a heating system via the new Ebus 2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Multifunction LCD display with display: history, self-diagnosis, operating temperature. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. > COMFORT OF USE AND INSTALLATION Standard Expert Control : intuitive system manager for the management of 3 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings. New intuitive electrical connections. Easier starting: automatic purge function and directly accessible combustion regulation. > CONSCIOUS CONSUMPTION, ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT Weekly, monthly and yearly analysis on your smartphone . Up to 25% energy savings in combination with Expert Control and the SRA function. Up to 35% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. All ready for Energy Labeling What is it about? From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the eco-design directive ( ErP known as « Energy Related Products ») imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information that allows for comparisons on the performance and energy consumption of the product you wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. Is it about me too? YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its devices or systems with the following documentation: product energy label; technical product sheet; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices; technical data sheet of the system with the parts relating to the product or system already completed. Dealer Responsibility First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device and/or system to the public. Therefore even professionals such as plumbers, installers or planners can fall into this category. Everyone is required to ensure that: all appliances and/or systems have their respective labels and make sure that they are clearly visible; all devices and/or systems are always accompanied by the mandatory technical data sheets; any type of advertising, promotional or technical material showing energy data or price indications contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP) : The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of device, there are different labels. Those with efficiency classes A, A+ and A++ certify the products with the highest performance. Furthermore, two different classifications are envisaged for domestic heating and for the hot water production service, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the final customer can make his choice in the most informed way possible. SYSTEM LABEL In addition to the product label, the system label is also provided if a series of matched appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label in order to inform the end user in the best possible way. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview SAVIO evoDENS HE 25S* CONDENSING BOILER COMPLETE WITH KIT FOR LPG LPG FUME EXHAUST - NEW ErP;ÿSTAINLESS STEEL wall-mounted condensing boilerÿ Technical specifications Model:ÿevoDENS HE Product codeÿLPG: 103021021000 Product codeÿLPG: 103121029000 Technical features: Heating/sanitary nominal heat inputkW 20.0 / 26.0 Yield name 60ø/80øC * % 96.7 Yield min. 60ø/80øC * % 92.4 NOx class no. 6 Minimum / maximum heating temperature****øC 25 / 80 Minimum / maximum heating pressurebar 3.0 / 0.3 Capacity of the expansion vessel (total / useful) l 7.0 / 3.5 Maximum flow rate (T=25 K) / (T=35 K) l/min 14.4 / 10.3 Specific sanitary flow rate (T=30 K) ***** l/min 12.0 Voltage / Power at nominal heat input V~/ W 230/100 Power at rest (stand-by) W 5 Degrees of protection nø IPX5D Dimensions HxWxDÿmm 700x400x290; 32.7 Kgs Boiler water content l 2 Main features EvoDENS HE The new range of wall-mounted condensing boilers: excellent performance thanks to the new heat exchanger Evodens HEÿis the new SAVIO range ofÿwall-mounted condensing boilersÿ: excellent performance thanks to the new heat exchanger and ease of use thanks to the digital control panel with large displays. Available in versions for heating and domestic hot water production and for heating onlyÿEvodens HEÿpresents a complete range of powers, 25 and 35 kW combi models and 25 and 35 SV models, in the same extremely compact dimensions (700 x 400 x 290 mm).ÿ Evodens HEÿhas the strong point in the innovative heat exchanger designed to provide high yields that last in the digital control panel, designed to communicate with the user in an easy and comfortable way. Like the entire SAVIO condensing range, ÿEvodens HEÿallows you to obtain maximum savings from climatic thermoregulation, based on the system in which the boiler is installed. MAIN FEATURES: High yields (in compliance with yield directive 92/42ÿCEE and Legislative Decree 311/06) Sanitary comfort( EN 13203) Primary condensing exchanger in stainless steelÿwith aluminum linings to offer maximumÿresistance to corrosion Total premix burner, built in stainless steel (Class NOx 5) Modulation 1:10 Methane also LPG Sanitary plate heat exchanger in stainless steel 7 liter expansion tanks High efficiency PWM pump with low power consumption variable speed Maximum power adjustable according to the system Degrees of protection IPX5D Can be installed in a partially protected place Integration with Savio solar systems, using a solar kit Innovative digital control panel Digital pressure reading Arrangement for remote control of external probe Possibility of managing a zone valve by means of a remote control in the case of multi-zone systems. High circulation single coil primary exchangerÿSavi produces the new Steelcoil compound exchanger with a stainless steel spiral enclosed in an aluminum shell. Thanks to the large exchange surface of the coil, greater thermal efficiency is guaranteed with less loss of charge and easier cleaning. The ease of cleaning and the sturdiness of this exchanger are one of the main strengths of the product which can be used on new systems but also on old systems in the case of renovations. Steelcoil integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the monspira. Does the absence of parallel circuits guarantee an easy cleaning operation? of the exchanger and the elimination of any air present in the system circuit. CONTROL PANEL Summer/winter/off selector Heating temperature regulator Sanitary temperature regulator Digital pressure reading Domestic hot water and heating temperature visualization from the display Display of fault diagnostics, fault history block status Refill ViewÿRecommended Refill Guide Display of months remaining until annual maintenance is due External temperature displayÿ(with external probe connected) andÿindication of external probeÿconnected and K value set Flame modulation display Visualization of SavioÿSOLCONTROL solar control unit connected to EVODENSÿHE, active solar pump and solar integration DHW comfort functionÿselectable by means of a dedicated keyÿand programmable Ingressdirectl the INFO menu dedicated to the user. Thermoregulation By connecting the external probe and the remote control (optional) directly to the boiler, climatic regulation can be used. EVODENS HE will adapt the water temperature of the system to the external climatic conditions, guaranteeing the achievement of the desired room temperature without waste and optimizing consumption. By using climatic regulation, the regulation efficiency also rises, giving greater value to your home. Ecodesign directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. Shipping From the day payment is received, the product will be shipped within 3 working days. Free insured shipping for Italy. Shipping will take place via one of the national carriers

Read more less

Technical features Model : Start IN Condens 25 KIS + Built-in Unit Code : 20114905 + 20082309 Efficiency Heating energy class: A Efficiency XL profile sanitary energy class: A Heating/DHW operating characteristics Heating nominal heat input: 20 kW Heating rated heat output: 19.5 kW Sanitary nominal heat input: 25 kW Sanitary nominal thermal power: 25 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn (50°/30°): 104.2% Profit return 30% (47th return): 108.9% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 14.3 l/min Dimensions (hxwxd) mm 792 x 405 x 248 ; 30 Kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: methane It can be installed flush-mounted using the special built-in unit Start In Condens is the new Riello condensing wall-mounted proposal for small and medium-sized domestic users. The new compact aluminum condensing exchanger guarantees efficiency and reduction of polluting emissions. It can be installed flush-mounted using the special kit and is available with powers of 25 and 29 kW. Low consumption circulator (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at temperature, reducing waiting times during withdrawal (can be activated by the user) Standard thermoregulation on the card in combination with the external probe (optional) The remote control panel of the RiCLOUD series (optional) allows you to manage the boiler directly from inside the home IPX5D electrical protection degree Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

SAUNIER DUVAL MICRA 4 25 GAS AND METHANE OPEN CHAMBER BOILER Technical features Energy classification HH (92/42/EEC) with efficiency up to 89.6% (30% of Pn) Continuous domestic hot water (DHW) production up to 14l/min High efficiency and modulating circulator Heating system antifreeze function Heating efficiency class: C Sanitary efficiency class: B Sanitary load profile XL Type: Heating and domestic hot water Domestic hot water production technology: Instantaneous Nominal power PMin/Max heat. 80/60 °C (kW) Heating: 9.5 / 25 Partial load efficiency 30% 40/30 °C (%): 89.6 Min/Max Rated Power (60°C) (kW) 5/25.2 Domestic hot water temperature Min/Max (°C) 35/60 Electric power absorbed Max (W) 88 Dimensions H / W / D (mm) 740 / 410 / 313 Power supply: METHANE MICRA 4 E Instant traditional wall mounted boiler Sanitary comfort High performance Low consumption The traditional boilers of the Micra 4 E range are characterized by a simple and linear design. The range includes a 25 kW combined model. The Micra 4 E range is characterized by a harmonious design and, thanks to its latest generation electronics and high-efficiency plate exchanger, it perfectly combines reduced consumption and all-round domestic comfort. In fact, Micra 4 guarantees a high production of domestic hot water and a constant room temperature by modulating its power according to the outside temperature and the actual request from the room Characteristics Energy classification ** (92/42/EEC) with efficiency up to 89.6% (30% of Pn) The control panel on the boiler, with backlit liquid crystal display and negative contrast, makes Micra 4 E adjustment extremely easy and immediate: with a few simple gestures it is possible to adjust the heating and domestic hot water temperatures, for any need . The small size makes Micra 4 E perfect for replacement in existing systems. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

  Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Seasonal heating efficiency % 94       Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 20/25 kW Heating nominal heat output: 19.64 kW Efficiency at rated power: 98.2% Efficiency at reduced load (30%): 103.4% Max electric power heating Watt 80 Electrical protection degree IP X5D Expansion vessel capacity 8 litres Quantity of hot water with Δt=25°C: 14 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 780x400x365 ; 38kg METHANE power supply Legend: C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control) Mynute Green E - ErP   System energy class A+ (in combination with external probe and Rec 08 remote panel) Heating energy class A Energy class of the sanitary A New condensing exchanger Modulation 1:5 Flex low consumption circulator (IEE≤0.20) Ducting with flue Ø 50 mm  The new Mynute Green E range is designed following the ecodesign indications provided for by the European ErP Directive and is made up of two combined models and a heating only model. The combined versions have a thermal capacity of 20-25 kW and 25-30 kW, values ​​which refer respectively to heating and DHW; similarly, the heating only version has a thermal capacity of 25-30 kW. The range offers as standard the new front access condensing exchanger with improved efficiency (94% seasonal efficiency), the low consumption modulating circulator, the predisposition for the clapet kit (optional) to be used for pressurized flues and the high pressure fan. prevalence to be able to carry out the ducting of flues with Ø 60 or Ø 50 exhausts. Mynute Green E: high energy efficiency, low gas consumption and low emissions. The entry into force of the European Directive ErP (26.09.2015) provides that even generators for the production of heating and domestic hot water are classified through the appropriate energy label indicating the class. Compulsory labeling provides greater transparency on the characteristics of the products which can be easily compared, helping the user to find those with greater efficiency. Consequently, even with boilers it will be easier to contribute to the achievement of the "20-20-20" objective set for the year 2020 which consists of: reducing greenhouse gas emissions (CO2 ) by 20%, increasing by 20 % use of renewable energies and reduce energy consumption by 20% in EU countries. The new Beretta condenser exchanger with front access The Mynute Green E boiler is equipped with the new Beretta condensing exchanger with front access. An innovative system of guides allows it to move like a drawer, making disassembly for cleaning required by current regulations much faster. Continuous research has allowed Beretta to obtain an exchanger characterized by a considerable increase in performance: 94% average seasonal efficiency calculated according to the European ErP Directive. The exchanger comes from a single aluminum tube, without welding thanks to an innovative production process. The high thermal conductivity of aluminium, much higher than that of steel, allows for greater uniformity in temperature distribution. The single pipe architecture (series circuit) allows for a large section for the passage of water with the advantage of reducing pressure drops and preventing the deposit of impurities, keeping the exchanger performing over time. With the new Beretta condensing exchanger, boiler performance improves up to an average seasonal efficiency of 94%. Mynute Green E, the elegant The new Mynute Green E is characterized by a particularly elegant aesthetic and is equipped with a simple and intuitive digital display which makes information on the status of the appliance immediately usable. The modern ergonomic knobs allow you to easily select all the functions necessary for using and setting the boiler. Flex modulating circulators: optimized performance, low consumption Mynute Green E uses a synchronous modulating circulator with low energy consumption, as required by the European ErP Directive. Thanks to this new technology, the electric motor of the circulator offers an Energy Effi ciency Index of less than 0.20, which means significantly reduced electricity consumption. The new circulator works proportionally to the power supplied by the boiler, thus contributing to a further reduction in electricity consumption. In case of need on the heating system, it is possible to change the head without having to replace the standard circulator with a high head one, the name “Flex” derives from this feature. Up to 49 meters of ducting With Mynute Green E it is possible to comfortably intubate even the most "difficult" flues thanks to the approval for flue Ø 50mm. The main 50mm flue ducts are available in the Beretta price list catalogue, while the boiler manuals provide indications of the maximum length, which differ according to the boiler power. Characteristics: MYNUTE GREEN E + external probe + REC 08 remote control forms a class A+ system Designed according to the ecodesign indications provided for by the European ErP Directive Energy Class > heating (class A) > DHW profile XL (class A) Seasonal heating efficiency 94% Low polluting emissions: class 5 (UNI EN 483) New high-flow aluminum condensing exchanger with front access Standard thermoregulation (optional external probe) ErP boilers with low consumption modulating circulator (EEI0.20) modifiable up to 7m head Hydraulic connections cover (optional) Possibility of intubating flues with the special flue ø 60 in PP and ø 50 in PP (only ErP boilers) Template, plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres   Beretta is “ERP”. The concrete commitment towards an eco-sustainable future   The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations issued at the same time for the energy labeling of products to supplement the corresponding Directive 2010/30/EU will also become effective.  The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands.   In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual devices. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency.   Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ARISTON GENUS PREMIUM EVO EXT 25 EU CONDENSING BOILER COMPLETE WITH LPG- ErP FUME KIT Technical features Product code: 3300735 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 22/2.5 Max/min heating thermal power (80°C-60°C) kW 21.5/2.4 Efficiency at nominal heat input (60/80°C) % 97.8 Efficiency at nominal heat input (30/50°C) % 106.2 Efficiency at 30% at 30°C % 109 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 20/ 45 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 12.2 Quantity of hot water ∆T=25°C litres/min 14.6 Quantity of hot water ∆T=35°C litres/min 10.4 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 70 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 770/505/240 Extremely small dimensions to adapt to any space problem. LPG power supply Ariston condensing boilers Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. EVO: energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the energy certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy. Genus Premium Evo EXT Genus Premium Evo EXT is the wall-mounted condensing boiler designed for outdoor installation. Thanks to its small size and low weight, installation is extremely simple. This without giving up the safety that distinguishes Ariston, i.e. exceptional resistance to cold (up to -15°C) and electrical protection from water and dust that reaches the highest levels (IPX5D classification). High efficiency product with reduced consumption thanks to the 1:10 modulation ratio and the high efficiency circulator with continuous modulation. characteristics: Wall mounted condensing boiler for outdoors with auto function Sensys system manager with integrated time programming Continuous modulation high efficiency circulator Electro-galvanized casing for outdoors Possibility of outdoor installation thanks to all weather protection systems. Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort External probe integrated in the boiler Semi-automatic filling Anti-freeze, anti-limescale and anti-blocking circulator protection Isothermal primary heat exchanger in stainless steel Increased sanitary exchanger Cold water inlet and heating return filters Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Genus Premium Evo EXT thanks also to the high modulation ratio 1:10, the continuously modulating pump and the presence of side sound-absorbing panels. High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

RIELLO START AQUA CONDENS 25 BIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT - NEW Erp: Start Aqua Condens a wall mounted boiler with a 45 liter stainless steel boiler. Technical features Technical specifications : Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 25 kW Heating rated heat output (80ø/60ø): ÿ24.50 kW Heating nominal heat output (50ø/30ø): ÿ26.25 kW Sanitary nominal heat input: 25 kW Sanitary nominal thermal power: ÿ25 kW Energy efficiency (92/42/EEC) ÿ**** Useful efficiency Pn (50ø/30ø): ÿ105% - 108% Useful efficiency 30% (47ø return): 107.1% Sealed chamber, forced draught Quantity of hot water with t 30øC: 141 *** Quantity of water drawn (litres) in 10' with ǽÓ??ÿT = 30øC Dimensions (hxlxp) mm 1005 x 450 x 600 ; 66 kgs Electrical protection degree: IP X5D NOx class: 5 PRODUCT CODE: 20100125 Power supply: LPG General characteristics START AQUA CONDENSING INTERNAL Combined model with 45 liter stainless steel storage tank. Start Aqua Condens is a wall mounted boiler with a 45 liter stainless steel boiler. The Riello heat exchanger made entirely of aluminum guarantees efficiency and durability, high head and reduction of polluting emissions. It is available with 25 kW power. Certification or Range Rated which makes it possible to adjust the nominal power of the boiler to the effective heat requirement of the system. Three speed circulator. Standard thermoregulation on the card in combination with the external probe (optional). Assembly template, hydraulic fittings, power supply cable supplied. Operation on methane as standard with the possibility of conversion to LPG (G31) (accessory), this modification to be carried out by the installer of the technical assistance service. ErP: Energy related Products The new European regulations for heat generators   ErP is the acronym of “ Energy related Products ” (products connected to the use of energy) and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design ("eco-design "). The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water. From the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players. The energy labeling of products for heating and domestic hot water production The regulations issued require that all products intended for heating and/or for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range.   In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate.   This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to builders. Product Guarantee All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE Energy label specifications according to the European ErP directive   Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal heat input: 25 kW Nominal heat output: 24.38 kW Classification European Directive EEC 92/42: **** Efficiency at rated power: 99.7% Efficiency at reduced load (30%): 109.4% Total electric power: 88W Quantity of hot water with Δt=25°C: 14.3 l/min Dimensions (hxwxd) mm 890x553x275; 44kg Standard antifreeze down to -15°C Standard Built-in antifreeze system (SAI) METHANE power supply Legend: HE (Hi Efficiency) C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control) AG (antifreeze (-15°C). Weather Green E (Hi Efficiency) Beretta boilers offer reliability and excellent technology, such that they can be used in solar thermal systems and in systems with the most recent and innovative technologies. Beretta presents Meteo Green e , the new range of outdoor and built-in condensing boilers designed to offer high energy efficiency. The boiler is in fact equipped with a wide modulation range (1:10), range rated approval, low consumption circulator (class A) with variable speed and all the advantages of the Meteo range.   Condensing exchanger : Designed to provide high performance in compliance with the strictest European directives in terms of energy efficiency and low emissions. The innovative condensing exchanger and the production process have allowed Beretta to file an application for a European Patent (Patent Pending). The exchanger is born in a single aluminum tube and without welding. The high thermal conductivity of aluminum allows for a more uniform distribution of temperature so as not to create overheating points for the benefit of greater durability of the exchanger. Furthermore, aluminum offers a high resistance to corrosion. The single pipe architecture (series circuit) allows to obtain a large section for the passage of water in the exchanger with the advantage of having low pressure drops and preventing both the deposit of limescale and impurities The innovative aluminum condensing exchanger allows you to recover a large part of the heat of the fumes by reducing losses to the chimney, and a large part of the latent heat of condensation of the water vapor present in the fumes, reaching a four-star energy efficiency value (according to European Directive EEC 92 /42). The exchanger is born in a single aluminum tube and without welding.  Modulation 1:10 The range offers a wide range of modulation to respond to real energy needs, while simultaneously offering high reduction of consumption. Beretta realizes this system through a totally pneumatic and therefore safe and reliable model. The electronics in fact act only on the number of revolutions of the fan (inlet air flow rate) without intervening on the injection of the quantity of gas which is automatically aspirated. Beretta therefore introduces a new double distribution mixer: a mechanical damper with a calibrated weight that opens or closes a part of the venturi section in order to divide the modulation range into two stages (smaller section with low air flow or larger section with high air flow rates). Beretta has also developed a specific silencer in the air intake to reduce any resonances generated by the new mixer.   Low consumption modulating circulator (Class A) It reduces electricity consumption by up to 60%, thanks also to self-adaptation in proportion to the power supplied or to operation at constant ΔT. Thanks to the new technology adopted, the electric motor of the circulator offers an Energy Efficiency Index EEI<0.23, which means considerably reduced electricity consumption and already in line with energy saving requests. The new low consumption modulating circulator (class A) offers technologically advanced control and allows a high reduction in consumption thanks also to the modulation in a wide range of flow rates. Comfort Technological innovation combined with advanced electronics allow obtaining the "Three stars" in sanitary comfort: the maximum foreseen by Pr EN 13203. Intelligent Management Meteo Green he is equipped with Easy Climate function (standard temperature control with external probe) and Remote Control Panel (REC07) with Easy Filling function (system filling that can be activated from the remote control), (only csi model).  Characteristics: Modulation 1:10 Low consumption modulating circulator (Class A): self-adaptation in proportion to the power supplied or operation at constant DELTA T, (EEI<0.23) RANGE RATED certification which allows you to adjust the heat input of the boiler to the actual needs of the system Performance 4 STARS according to European Directive EEC 92/42 Efficiency at 100% Pn > 93+2 log Pn according to DL 311/06 Low polluting emissions: class 5 according to UNI EN 483 Patented condensing exchanger (Patent Pending) in aluminum with high flow rate Sanitary comfort 3 STARS: the maximum required by Pr EN 13203 Thermoregulation with standard external probe REC 07 remote control panel as standard Standard antifreeze protection down to -15°C (mod. AG) IPX5D electrical protection degree For gas transformation, contact the Assistance Centres Authorized Beretta technique   Beretta is “ERP”. The concrete commitment towards an eco-sustainable future   The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations simultaneously issued for the energy labeling of products will also become effective in addition to the corresponding Directive 2010/30/EU.  The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands.   In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual devices. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with a nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency.   Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ARISTON GENUS PREMIUM EVO EXT 25 EU CONDENSING COMPLETE WITH METHANE FUME KIT - ErP Product code: 3300735 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 22/2.5 Max/min heating thermal power (80°C-60°C) kW 21.5/2.4 Efficiency at nominal heat input (60/80°C) % 97.8 Efficiency at nominal heat input (30/50°C) % 106.2 Efficiency at 30% at 30°C % 109 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 20/ 45 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 12.2 Quantity of hot water ∆T=25°C litres/min 14.6 Quantity of hot water ∆T=35°C litres/min 10.4 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 70 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 770/505/240 Extremely small dimensions to adapt to any space problem. METHANE power supply Ariston condensing boilers Genus Premium Evo EXT Genus Premium Evo EXT is the wall-mounted condensing boiler designed for outdoor installation. Thanks to its small size and low weight, installation is extremely simple. This without giving up the safety that distinguishes Ariston, i.e. exceptional resistance to cold (up to -15°C) and electrical protection from water and dust that reaches the highest levels (IPX5D classification). High efficiency product with reduced consumption thanks to the 1:10 modulation ratio and the high efficiency circulator with continuous modulation. Wall mounted condensing boiler for outdoors with auto function Sensys system manager with integrated time programming Continuous modulation high efficiency circulator Electro-galvanized casing for outdoors Possibility of outdoor installation thanks to all weather protection systems. Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort External probe integrated in the boiler Semi-automatic filling Anti-freeze, anti-limescale and anti-blocking circulator protection Isothermal primary heat exchanger in stainless steel Increased sanitary exchanger Cold water inlet and heating return filters Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Genus Premium Evo EXT thanks also to the high modulation ratio 1:10, the continuously modulating pump and the presence of side sound-absorbing panels. High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase  

Read more less