Baxi AVANT BLUE 24 Fi condensing boiler Low NOx 6 complete with flue kit cod. 7724370 - NEW Baxi brand Model Avant Blue 24 FI Product Code 7724370 Power 24 kW Energy class A Condensation type Heating/DHW nominal heat input kW 24.8 Sanitary nominal thermal power kW 24 Emissions of nitrogen oxides NOx mg/kWh 18 Sanitary water production ∆T 25°C l/min 13.7 Minimum domestic water flow rate l/min 2 Natural gas supply (LPG via conversion kit) Combustion Chamber Sealed chamber/Forced draft Degree of protection IPX5D Dimensions (LxHxP) - Weight 450x763x345 mm Weight; 43.5 kgs AVANTBLUE Baxi Avant Blue FI 7724370 NOx6 24 kW ErP natural gas, the condensing boiler with energy class A Low NOx emissions: class 6 according to EN 15502 Modulating fan Aluminum alloy condensing post-exchanger Sturdy and reliable: brass hydraulic unit with turbine sanitary sensor for optimal comfort and large passage copper exchanger Arrangement for combination with the Baxi integrated solar system Same settings as a traditional boiler (the analyzer is not necessary to adjust the gas valve) Operation on methane (possibility of operation on LPG with conversion kit) Control panel with multifunction LCD display hydraulic system Brass hydraulic unit with electric three-way diverter valve and turbine sanitary sensor Steel burner Copper water/fume exchanger Sanitary heat exchanger in stainless steel Aluminum alloy condensing post-exchanger High efficiency circulation pump Pump anti-blocking system and 3-way valve (which intervenes every 24 hours) Pump post-circulation Automatic by-pass Built-in condensate drain siphon Thermoregulation system Climatic adjustment (external probe available as an option) Heating circuit temperature adjustment DHW circuit temperature adjustment Remote control and climatic regulator available as an accessory, both in wired and wireless versions Control system Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch which blocks the boiler in case of water shortage Safety air pressure switch for checking correct smoke evacuation Temperature control using NTC probes. Pressure indicator Electronic thermometer Total antifreeze protection Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello Residence Condens 30 kis condensing boiler complete with Low NOx Methane Fume Kit class A - NEW Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Heating/DHW operating characteristics Heating nominal heat input kW 20 Nominal thermal power (80°-60°) heat kW 19.5 Maximum heating pressure bar 3 DHW nominal heat input kW 25 Nominal thermal power* sanitary kW 26.3 Hot water production with t+25 °cl/min 15.1 NOx class 5 Dimensions HxWxD mm 740x420x350 Electrical data Total electric power (pmax heating) W 75 Supply voltage V - Hz 230 - 50 IP X5D degree of protection Power supply: METHANE RESIDENCE CONDENS RIELLO PRESENTS RESIDENCE THE NEW RANGE OF CONDENSING BOILERS NEW EXCHANGER Wrapped stainless steel primary exchanger. Efficiency and reliability in the heart of the Residence. DOMESTIC COMFORT FUNCTION Domestic water pre-heating with Touch&Go function for activation upon request directly from the drawing tap. ACTIVE COMBUSTION CONTROL Advanced electronic combustion control system which constantly monitors combustion to obtain constantly optimized consumption and emissions. DIGITAL USER INTERFACE Simple and intuitive backlit LCD display. Ease of setting thanks to the silk-screened keys dedicated to the individual user functions. MODULATING CIRCULATOR High efficiency circulator with flow rate modulation and regulation logic that can be set between different modes according to the type of system. HIGH EFFICIENCY The high efficiency of the primary exchanger, the modulating circulator and the continuous control of the combustion parameters guarantee very low consumption even after years of operation. QUICK INSTALLATION Speed ​​and ease of installation thanks to the compact dimensions, accessibility of the components and external electrical connections. UNIQUE VERSION METHANE - LPG Dedicated codes are no longer necessary in the case of LPG because Residence is able to automatically adapt its operation to the type of fuel with rapid setting from the display. FLEXIBLE INSTALLATION The characteristics of Residence and its compact dimensions make it the ideal solution for both indoor and recessed installation (model 25 KIS only) or outdoors in a partially protected place. RESIDENCE, HEART OF STEEL The new RESIDENCE exchanger is made of stainless steel, with a smooth tube with a large section to guarantee the best efficiency and cleanliness over time. NEW PRIMARY EXCHANGER IN STAINLESS STEEL The single coil geometry (hydraulic circuit in series) guarantees constant flow in all sections of the exchanger and intrinsically prevents clogging. Front access facilitates periodic maintenance and cleaning of the combustion chamber. SELF-ADAPTING ELECTRONIC COMBUSTION CONTROL The new Residence is equipped with the intelligent ACC combustion control system, which guarantees that the process always takes place in an optimal manner in any condition, thanks to the modulating gas valve and the ionisation electrode. Thanks to the ACC, Residence is able to automatically adapt to the fuel (methane or LPG) without resorting to specific codes or accessory conversion kits. Residence also reacts to the variation of the fuel title and to the pressure drops on the flue gas side. The ACC system detects the excess air value and intervenes by modulating the mixture. The ACC system also simplifies installation. During ignition, it does not require calibration and it is sufficient to select the type of combustible gas used by the boiler via the interface, if different from the default one (methane). Since the system keeps the value of the CO2 produced constant, even the smoke control during the ignition phase is no longer necessary for the correct functioning of the product. Controlling combustion also means guaranteeing constant emissions, which are always well below the limits set by the law. In fact, if the process takes place in an optimal manner, the gases produced will also have the best theoretical composition with respect to the other conditions. MANY NEEDS, ONE SOLUTION RESIDENCE IS ALWAYS THE IDEAL CHOICE THANKS TO THE TECHNICAL SOLUTIONS AND THE COMPACT DIMENSIONS, IT CAN BE USED IN ANY INSTALLATION SITUATION INTERIOR Inside the home, thanks to an elegant aesthetic that allows it to be inserted pleasantly into any environment. OUTDOOR Outdoors in a partially protected place, thanks to the IPX5D degree of protection and the accessory antifreeze heater kit RECESSED Inside a built-in box thanks to its compact dimensions (model 25 KIS only). NEW DIGITAL CONTROL Setting your own comfort for domestic hot water, air and heating is immediate thanks to the buttons with symbols dedicated to the individual functions Domestic hot water temperature setting Operating status 0FF - SUMMER - WINTER Unlock and restore alarms Information and parameters menu Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THE PRODUCT IS AVAILABLE ON ORDER Technical features Model : Victrix Tera 24 Plus Product code : 3.027373GPL Maximum nominal heat input in DHW: 28.8 kW Maximum nominal heat input in heating mode: 24.6 kW Minimum nominal heat input: 4.5 kW Maximum useful thermal power in DHW: 28.3 kW Maximum useful thermal power in heating: 24.1 kW Minimum useful thermal power: 4.3 kW Useful thermal efficiency at 100% Pn (80 / 60 °C): 97.8% Useful thermal efficiency at 30% of the nominal load. (80 / 60 °C) : 102.3% Useful thermal efficiency at 100% Pn (40 / 30 °C) : 106% Useful thermal efficiency at 30% of the nominal load. (40 / 30 °C) : 108.2% Minimum gas flow rate to the burner: 0.48 m 3 /h Maximum gas flow rate to the burner: 3.05 m 3 /h Weighted CO : 20 mg/kWh Weighted NO X : 35 mg/kWh Power supply: LPG NO x class : 6 Minimum suction/exhaust available head: 2 Pa Maximum suction/exhaust available head: 240 Pa Nominal heating expansion vessel capacity: 8 litres Electrical protection degree : IPX5D Dimensions and weight Dimensions (HxWxD): 748x440x256 mm Empty weight: 33.8 kg Immergas Victrix Tera Plus Mural compact and instant built-in and for heating only VICTRIX TERA 24 PLUS can be used as a boiler for room heating only or connected via an optional kit to a boiler unit for the production of domestic hot water Ideal for multiple withdrawals of domestic hot water For large domestic hot water needs or for multiple simultaneous withdrawals, the combination with the separate storage tank unit is possible with models from 80 to 2000 liters Combinations with solar thermal systems Storage tank units with a capacity of 120 liters or higher are designed for the combination of forced circulation thermal solar systems, including the UB INOX SOLAR 200 V2 version equipped with an integrated solar circuit. The VICTRIX TERA 24 PLUS boiler can be connected to the entire range of Immergas Solar Solutions Simplicity of commands The controls are simple, the LCD display is clear, and the selection buttons for adjustments and settings work quickly. Condensing module with stainless steel coil Low consumption in Stand-By, less than 6 W Class A circulator The low-consumption circulator allows considerable savings in electricity compared to a traditional circulator and adjusts its performance based on the variations in the hydraulic flow rate of the system, for example in the presence of thermostatic valves or zone valves Indoor/outdoor and recessed installation The range is approved for operation outside the home with top cover kit for installation in partially protected places (3.027263). An electric resistance kit is available to increase the antifreeze protection from -5 °C to -15 °C (3.017324) Recessed installation The built-in installation in the OMNI CONTAINER (3.016991) allows the boiler to be positioned outside in a niche and thus recover living space. To insert the boiler inside the OMNI CONTAINER it is necessary to use the optional support bracket (3.027129) Remote adjustment The boiler can be connected to the CAR V2 , the modulating chronothermostat which allows you to control the boiler comfortably from inside the home . The SMARTECH PLUS wireless chronothermostat with Bluetooth technology is also available: it allows you to adjust the heating temperature even with a smartphone via a dedicated app Solutions for compact hybrid systems The VICTRIX TERA range can be installed in TRIO V2/TRIO MONO V2 systems. Prepared for the combination of the condensing boiler with the AUDAX heat pumps and the use of solar thermal, they allow to increase the energy performance of the building and to exploit renewable energies by reducing harmful emissions . The TRIO V2 compact hybrid systems are ideal for small apartments but also single-family houses . They can be installed flush-mounted or in specific technical cabinets and allow for the reduction of installation space for plant engineering Installation flexibility with trio In applications with TRIO V2/TRIO MONO V2, the models of the VICTRIX TERA range can be installed in the SOLAR CONTAINER or in the DOMUS CONTAINER. The boiler support bracket is inserted as standard with the accessory kit for combination with AUDAX and instantaneous boiler and with the accessory kit for combination with AUDAX and PLUS boiler. Formula Comfort 10 It benefits from the most comprehensive maintenance program lasting 10 years with no activation costs , with the possibility of extending it up to 15 years . In collaboration with the Immergas Authorized Service Centre, it can be activated during the initial check Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating max heat input kW 28.0 Nominal thermal power kW 27.0 Efficiency Pmax (80/60°C) % 103.5 Directive efficiency class 92/42 EEC **** Max. heating operating pressure bar 3 Heating pressure min. bars 0.8 Domestic hot water production: -Δt 25°C: 15.7 l/min -Δt 30°C: 13.0 l/min Sanitary working pressure Max: 9 bar Dimensions WxHxD mm 700x400x320 mm Power supply: LPG *NB: ALSO OPERATES ON LPG WITH THE USE OF A SPECIAL CONVERSION KIT TO BE REQUESTED FROM THE AUTHORIZED SERVICE CENTRE. General characteristics DIVACONDENS F28 D DIVACONDENS D is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes. ADVANTAGES Robust post-condenser powered by the closed circuit of the primary circuit, i.e. without the inlet of external mains water. The heat exchange with the fumes takes place inside large diameter water passages. Generator with simple and rational operation Condensate collection device to protect the air pressure switch, for regular combustion even in the presence of very cold external temperatures ECO function in DHW for greater savings in the period of low use of hot water Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems Place of installation: also for outdoors in a partially protected place down to -5°C as standard Certified operation also with propane air (50% air – 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center (max total price of 30 euros + VAT) Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available. THE BOILER CONTROL The control box of DIVACONDENS D consists of an easy to use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. MAIN COMPONENTS RECOVERY UNIT/HYDRAULIC DIAGRAMS FUME THERMOSTAT It preserves the integrity of the polypropylene pipes and, together with the air pressure switch, constitutes a double safety device for the evacuation system. OPTIMIZE COMFORT AND SAVINGS ROMEO TIMER (optional) The Romeo remote control allows control and setting of the boiler functions directly from the room in which it is installed. Comfort programming is possible on a weekly basis and also includes the 'holiday' function. Romeo is available with wired or wireless connection. The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings. HIGH EFFICIENCY CIRCULATOR EU regulation 622/2012 establishes that all boilers introduced on the market from 1 August 2015 must be equipped with a high-efficiency circulator (technically speaking, with an EEI, energy efficiency index ≤ 0.23). This decision was taken following the enormous energy consumption of all pumps and circulators installed in different applications in Europe. In practice, a high-efficiency circulator - incorporated in the boiler - reduces up to 30% of the total electricity consumption of the boiler itself. ONE CENT PER HOUR If we consider the maximum consumption of the pump mounted on the Divacondens D (0.04 kWh) compared to the previous circulator (0.085 kWh) we will save almost a euro cent for each hour of operation (electricity cost €0.19/kWh). Let's therefore multiply this tiny value by each hour of operation of the circulator in a year (for example 2,500 hours, for a moderately cold climate) ... €21.40 will be the annual saving if we replace an old boiler, and therefore also a old circulator, with Divacondens SUN EASY FUNCTION DIVACONDENS D boasts electronics that simplify integration with thermal solar systems, both with natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and switches on the burner only if necessary. In case of insufficient irradiation and therefore a modest pre-heating of the domestic water, the boiler will contribute with the heat necessary to reach the required set point temperature. If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, by exploiting and integrating even the smallest solar contribution, otherwise lost by mixing the thermostatic valves. FUNCTIONS ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function makes it possible to recover all the heat supplied due to thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (customizable duration) and is active after the burner goes out in heating mode. OPERATION IN SLIDING TEMPERATURE With the installation of the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The electronic board of DIVACONDENS D adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite. Product Guarantee: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Heating energy class: A; DHW energy class (domestic hot water): A (ErP); Declared load profile XL Nominal thermal power: 23 kW Nominal heat input: 23.5 kW Nominal thermal power sanitary: 28kW Useful thermal efficiency at rated power: 40/30 °C: 102% Useful thermal efficiency at 30% rated load: 40/30 °C: 108% Continuous sanitary production: 21 l/min Accumulation capacity: 42 l NOx class: 5 Degree of protection: IP X4D Version: CNG General characteristics The Cerapuracu boiler is equipped with a tank intended for the accumulation of domestic hot water, so as to guarantee a large quantity of water and has a very simple installation system. This feature makes it innovative by responding with high performance with energy saving. Delivered for outdoor installation, in a fairly protected place, in compliance with current legislation. Functions: Suitable for use with Ø 60 mm drains; 10 liter heating expansion tank; 2-litre sanitary expansion vessel; Class 5 emissions; Circulator dedicated to the accumulation of DHW Circulator for heating in Energy Class A. High efficiency primary heat exchanger; Oversized sanitary plate heat exchanger. Bosch Heatronic 3®, with BUS system, has various functions for changing application parameters; easy inspection of any stored anomalies; detection of the temperatures identified by the various sensors and indications regarding the status of the appliance; SolarInside-ControlUnit: solar optimization on/off; 42 liter stratified storage system divided into 3 tanks; Continuous modulation of both DHW and heating power; Modulating fan and premix burner; 7 bar safety valve for storage tanks; System filling device integrated in the boiler; Internal circulator dedicated to the DHW storage system and heating side circulator in Energy Class A. Can be combined with (Accessories): Possible remote management via MB LAN2 modules (accessory) which can be combined with CR 100 or CW thermoregulators. Management with Bosch Control CT100, digital modulating room thermoregulator, with soft touch display that can be positioned on the wall, with an elegant and refined design; accompanied by a smart and functional app (JunkersHome). Optimal combination with solar thermal systems for DHW using the TWM 20 accessory. Dimensions (LxWxH): 482 x 600 x 880 mm; 67kg

Read more less

FERROLI BLUEHELIX K 50 25 Kw CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Characteristics: Seasonal space heating energy efficiency class A Water heating energy efficiency class A Declared load profile XL Heat Capacity (PCI) Min / Max Heating: 5.8 / 25.0 Thermal power 80°C-60°C: 5.7 / 24.5 Useful thermal efficiency 80°C-60°C Pmax % / Pmin %: 98.0 / 97.8 Emission class Nox class 5 Boiler capacity 50 litres Domestic hot water production Δt 30°C l/10 min 175 Sanitary Manufacturing (EN 13203) ★★★ Heating working pressure Max bar 3 DHW working pressure Max bar 9 Empty weight kg 50 Dimensions HxWxD: 800 x 600 x 420 Power supply: METHANE Certified operation also with LPG using a special kit to be requested from the Authorized Assistance Centre CHARACTERISTICS Boiler body with the new patented primary exchanger in thick AISI 316 TI stainless steel Production of domestic hot water with 50-litre stainless steel domestic hot water storage tank Total premix burner in stainless steel Electronic flame modulation both in heating and DHW Digital control panel Can be combined with the modulating remote timer control Low consumption modulating heating pump (Erp Ready - Class A) Refined design and compact size Casing painted in white by anaphoresis with epoxy powders 3-star certified comfort in sanitary manufacturing according to EN 13203 Sliding temperature operation via optional external probe Digital flame control with three re-ignition attempts in case of operation due to lack of flame detection (methane model) Arrangement for recirculation attachments Standard by-pass Place of installation: also for outdoors in a partially protected place up to - 5 ° C as standard TANGIBLE FACTS max consumption standard non-modulating circulator: 0.085 kW max consumption new high efficiency circulator: 0.04 kW Degree days 2500 (average climate zone E) Energy cost: €0.19/kWh * Hypothetical annual expenditure at max standard circulator speed: €40.375 Hypothetical annual expenditure at max speed of high efficiency circulator: €11.4 Therefore, with the replacement of standard boilers with Bluehelix K 50, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W. The low-consumption circulator installed in the Bluehelix K 50 has a variable flow rate, with ΔT control. The advantages o ered are many, including: System start-up from cold: faster start-up with full control of the thermal load on the components Long-lasting maintenance of the temperature equilibrium conditions, once the set point has been reached Better operation in limit conditions (e.g. at minimum power), reduction of on-oFF states Reactivity to variations in the thermal load, an appreciable quality in multi-zone systems ..ROBUST Others are the merits attributable to the circulator chosen for Bluehelix K 50: The PWM signal (pulse width modulation) to the circulator allows extremely rapid intervention times to complete an advanced and complete electronic platform. This results in a drastic reduction of the ON-OFF events of the burner and the circulator. Electronic control of the drive torque at start up with consequent reduction of the risk of blocking. The routine anti-seize cycle is in any case carried out every 24 hours of inactivity. Self-protection function in case of overheating Less noise All this translates into greater longevity not only of the circulator, but also of the components subject to wear and tear from frequent on-off cycles. COMFORT AND SAFETY The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life for the appliance. SLIDING TEMPERATURE OPERATION With the installation of the “external probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. ANTI-LEGIONELLA FUNCTION In order to keep the storage cylinder in suitable hygienic-sanitary conditions, the product electronics are able to keep it at a temperature of 65°C at programmable time intervals from one to seven days. ANTI-BLOCK FUNCTION In order to avoid blockage and consequent damage to the heating circulator and the three-way diverter valve, after a set period of inactivity, the boiler electronics activate operation for a few seconds. ANTIFREEZE FUNCTION In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. ECONOMY/COMFORT FUNCTION By activating the appropriate key, heating/temperature maintenance can be excluded by the user (Economy). This makes it possible to reduce fuel consumption during periods of non-use of domestic water Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview BIASI INOVIA COND E 25S METHANE CONDENSING BOILER - NEW ErP, SEALED CHAMBER COMPLETE WITH FUME EXHAUST KIT: Wall mounted condensing boilers. The premixed range is simple on the outside and technological on the inside. The sites displaying the Biasi web sales authorized brand have been authorized by BSG Caldaie a Gas SpA for the sale of Biasi products. These companies therefore release the conventional guarantee. Technical specifications o Model: Inovia Cond E 25S Energy label specifications according to the European ErP directive o Class A heating energy efficiency o Sanitary energy efficiency Class A o Withdrawal profile: XL Characteristics of heating/DHW operation: o DHW useful thermal power: 24.4 kW o Useful thermal power for heating: 19.5 kW o Nominal kW heat input(*): 25 kW o Efficiency at 100% load: 106.2% o Sanitary flow rate t =25°K: 15.9 l/min o High yields (in compliance with yield directive 92/42 CEE and Legislative Decree 311/06) o Sanitary comfort (EN 13203) o Total premix burner, built in stainless steel (Class NOx 5) o Sanitary plate heat exchanger in stainless steel o High efficiency pump with low energy consumption o IPX5D degree of protection o Dimensions hxwxd: mm 700 x 400 x 290; 32kg o METHANE power supply Main features Inovia Cond E Premixed condensing boilers Inovia Cond E represents the new premixed BIASI condensing boiler. Inovia Cond E is equipped with innovative aesthetics and a new interface that is immediate and easy to use, it is equipped with new functions that make it an integral part of a system and which facilitate its installation and maintenance. Inovia Cond E offers all the advantages of condensing technology: great performance, high efficiency, energy saving and respect for the environment thanks to reduced polluting emissions such as NOx and CO. Installed in low temperature systems, they allow savings of up to 30%. Characteristics: o • High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06) or • Sanitary comfort (EN 13203) o • Primary condensing exchanger in stainless steel with plastic coating to offer maximum resistance to corrosion o • Total premix burner, built in stainless steel (Class NOx 5) or • Sanitary plate heat exchanger in stainless steel or • High efficiency pump with low energy consumption or • IPX5D degree of protection or • Can be installed in a partially protected place or • Integration with BIASI solar systems, using a solar kit o • Innovative digital control panel with graphic interface and keys or • Digital pressure reading by pressure transducer or • Arrangement for remote control and external probe or • Possibility of remotely managing a zone valve in the case of multi-zone systems. Control panel: o Summer/winter/off selector o Heating temperature regulator o DHW temperature regulator o Digital pressure reading o Domestic hot water and heating temperature visualization from the display o Visualization of fault diagnostics, block status and fault history o Recommended filling view and filling guide o View months left until annual maintenance is due o External temperature display (with external probe connected) and signaling of external probe connected and K value set o Display of flame modulation o Visualization of the BIASI SOLCONTROL solar control unit connected to Inovia Cond E, active solar pump and solar integration o DHW comfort function selectable by means of a dedicated and programmable key o Direct access to the INFO menu dedicated to the user. Fiscal detraction As a condensing boiler, Inovia Cond E allows you to take advantage of the tax deduction according to current legislation. d Thermoregulation By connecting the external probe (optional) directly to the boiler, climatic regulation can be used. Inovia Cond E will adapt the system water temperature to the external climatic conditions, ensuring that the desired room temperature is reached without waste and optimizing consumption. The boiler is equipped with a complete set of curves which can be accessed by entering programming. The curve is simply chosen from the control panel. Solar management Inovia Cond E integrates solar management directly into the product. Thanks to the integrated solar management it is possible to connect the SOLCONTROL control unit and view the status of the pump and the relative solar integration. Zone management Inovia Cond E features the zone management card as standard which allows you to manage a zone valve using the BIASI remote control. In the case of a system with several high temperature zones, one zone can be managed by remote control and the other zones can be managed by chronothermostats. This allows you to select two thermoregulation curves, one in the boiler and the other in the remote control. All the zones controlled by chronothermostats will be managed by the thermoregulation curve set in the boiler, the zone controlled by the remote control will be managed by the thermoregulation curve set therein. In the case of multi-zone systems at high and low temperatures, it is recommended to use the BIASI MULTIzone system manager. All ready for Energy Labeling What is it about? From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the Eco-Design Directive (ErP known as « Energy Related Products ») imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: or generators with a capacity of less than 400 kW or water heaters with a capacity of less than 400 kW, or kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows them to compare the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. Is it about me too? YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its devices or systems with the following documentation: o product energy label; o product data sheet; o system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices; o technical data sheet of the system with the parts relating to the product or the system already completed. o Dealer liability First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device and/or system to the public. Therefore even professionals such as plumbers, installers or planners can fall into this category. Everyone is required to ensure that: o all appliances and/or systems are equipped with the respective labels and make sure that they are clearly visible; o all devices and/or systems are always accompanied by the mandatory technical data sheets; o any type of advertising, promotional or technical material in which energy data or price indications are shown, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of device, there are different labels. Those with efficiency classes A, A+ and A++ certify the products with the highest performance. Furthermore, two different classifications are envisaged for domestic heating and for the hot water production service, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the final customer can make his choice in the most informed way possible. SYSTEM LABEL In addition to the product label, the system label is also provided if a series of matched appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label in order to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview SAVIO EVOdens MAX E 35S* CONDENSING BOILER WITH TANK COMPLETE WITH LPG LPG FUME EXHAUST KIT - NEW ErP Technical specifications Model:ÿEVODENS MAX LPG code: 103041007300 LPG code: 103141006300 Characteristics of heating/sanitary exercises: Heating/sanitary nominal heat inputkWÿ30.0 / 34.0 Heating/sanitary maximum useful powerkWÿ29.5 / 33.4 Yield name 60ø/80øC %ÿ98.2 Yield min. 60ø/80øC %ÿ97.6 Yield at 30% of the %102.1ÿ load Energy efficiencynø Minimum / maximum heating temperature**øC 25 / 85 Sanitary minimum / maximum pressurebar 0.3 / 3.0 Sanitary expansion vessel capacity (total) l 2.0 Boiler nominal capacity l 45 Boiler useful capacity l 41 Maximum flow rate (T=25 K) / (T=35 K) l/minÿ20.8 / 13.6 Voltage / Power at nominal heat input V ~ / W 230 ~ / 112 Power at minimum thermal capacity W 10 Power at rest (stand-by) W 5 Degrees of protection nø IPX4D Boiler water content 3.5 l Dimensions HxWxD:ÿ900x600x400; 70.5 Characteristics EVO DENS MAX E The EVODENS MAX E boilers with porcelain-glass storage tank were designed to satisfy the most demanding users: large and immediate production of domestic hot water despite being a boiler of contained dimensions. The storage tank, together with the latest generation primary condensing exchanger, ensure continuous supply of domestic water in service at the desired temperature. For this reason, EVODENS MAX E boilers are the ideal solution for the comfort of the whole family. Features:ÿ High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06) Sanitary comfort( EN 13203) Primary and condensing exchanger in stainless steel with plastic coatings to offer maximum resistance to corrosion Total premix burner, built in stainless steel (ClassÿNOx 5) High efficiency pump with low energy consumption, ErP Ready Maximum power adjustable according to the needs of the system Glass-porcelain steel boiler with convenient inspection and cleaning flange Magnesium anodal dismountable External insulation of the boiler in polyurethane foam Two-litre sanitary expansion tanks, as standard Degrees of protection IPX5D Installability in a partially protected place Integration with Savio solar systems, using a solar kit Innovative digital control panel with graphical interface and keys Digital pressure reading by pressure transducer Arrangement for external probe remote control Possibility of managing a zone valve by means of a remote control in the case of multi-zone systems Four-controllers Summer / winter / off selector Heating temperature regulator DHW temperature regulator Digital pressure reading DHW and heating temperature visualization from the display Fault diagnostics display, fault history block status View recommended fills fill guide View months left until annual maintenance is due External temperature display (with external probe connected) and signaling of external probe connected and ÿK value set Flame modulation display Visualization of SaviSOLCONTROL solar control unit connected to EVODENS MAX E, active solar pump and solar integration Sanitary comfort function selectable via dedicated key Ingressdirectal INFO menu dedicated to the user STANDARD: Boiler support bracket and paper template Boiler power cable Condensate collection siphon Quick instruction to the user OPTIONALS: Paper template remote control External probe kit Tap kit (system boiler connection pipes, gas and sanitary water taps and quick couplings) Ecodesign directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase. Shipping From the day payment is received, the product will be shipped within 3 working days. Free insured shipping for Italy. Shipping will take place via one of the national carriers

Read more less

ATTENTION Possibility of propane supply by means of a simple regulation. For info, contact the local authorized assistance center in advance Hermann Saunier Duval MASTER CONDENS 26 25 kW condensing boiler with 42 liter boiler - NEW Heating efficiency class A Sanitary efficiency class - A Sanitary load profile - XL Heating Fireplace flow rate Qmin/max - 80/60°C kW 2.7 - 20.6 Sanitary Fireplace flow rate Qmin/max - 60°C kW 2.7 - 26.0 Specific flow rate (∆T = 25K) (EN13203) l/min 14.8 Dimensions mm (HxLxP) 892x470x514 MASTER CONDENS Wall mounted combined condensing boiler with integrated storage tank and Aquaspeed PLUS® system Limitless comfort. At the top of the range in terms of performance, sanitary comfort and optimization of consumption, the new Master Condens has a renewed design, flat casing to facilitate installation and an innovative touch-screen user interface. The improved Aquaspeed PLUS® technology, combined with the new FlameFit® gas-adaptable combustion system, guarantees exceptional sanitary comfort, while the two 21-litre boilers make Master Condens the ideal solution for large families and homes with several bathrooms, ensuring hot water reserve, immediately available. The new Smart Tank Loading function avoids unnecessary energy consumption: based on the user's daily needs recorded in the first few weeks, the boiler autonomously heats the water only when necessary. The range consists of three natural gas models of 26, 31 and 35kW, which can be converted to propane via simple electronic regulation. The hydraulic connections are unchanged from the previous version. Maximum sanitary comfort with the Aquaspeed PLUS® system Large quantities of hot water immediately available Temperature stability even with multiple simultaneous withdrawals New FlameFit® combustion technology Smart Tank Loading function High modulation up to 1:10 New 26kW model Modern design with touch-screen user interface New diagnostics and malfunction detection The new Master Condens range boasts exceptionally low consumption and is positioned at the top of the category both in terms of sanitary comfort and efficiency thanks also to the exclusive Aquaspeed PLUS ® system for the production of domestic hot water which allows for stable temperatures even in the event of large contemporary withdrawals for comfort at the highest levels. Innovation at the service of comfort. Aquaspeed PLUS® and integrated boilers: comfort is absolute Thanks to the implementation of the Aquaspeed PLUS® system and the two stainless steel boilers of 21 liters each, Master Condens guarantees exceptional sanitary comfort with extremely low gas consumption. The ideal solution to meet the need for large quantities of domestic hot water, the boiler is able to satisfy the simultaneous requests of multiple users while maintaining maximum stability of the temperature of the water supplied. By exploiting the principle of stratification, the two boilers are in fact able to supply up to 276 liters of water (ΔT = 30K) for ten minutes without temperature fluctuations: the water contained in the upper part of the first boiler is always kept hot and, in short time, the heat needed to reach the desired brewing temperature is transferred uniformly to the rest of the two interconnected boilers. FlameFit® technology: more efficiency, less consumption and emissions The innovative FlameFit® combustion technology with which all Master Condens models are equipped allows the boiler to be adapted autonomously to the different types and qualities of gas, always guaranteeing optimized and fully functioning safety. In fact, the flame control electrode detects the varied characteristics of the gas and automatically adjusts the parameters to ensure perfectly efficient combustion, adapting the operation of the boiler to the actual needs of the user, with consequent energy savings, reduction of consumption as well as polluting emissions . FlameFit® technology makes Master Condens ready to operate with any type of future gas, without the need for conversion kits. New touch screen user interface The interface of the new Master Condens features a modern digital touch display and has been designed to simplify boiler management by the user as much as possible. The symbology of the various keys and the "talking messages" that can be viewed on the display allow for a rapid understanding of the main functions and how to set parameters according to one's comfort needs. 4-star energy classification (92/42/EEC) with yields up to 109.5%; 3-star DHW comfort (EN 13203-1), thanks to the exclusive Aquaspeed PLUS® technology with DHW plate heat exchanger in stainless steel and double dynamic storage tank (42 litres). Solar Easy . All models in the Master Condens range are compatible with all solar systems. If solar radiation is not sufficient to keep the domestic water at the desired temperature, the boiler intervenes as an integration. Master Condens is compatible with the MiGo WiFi control unit . The wall-mounted boiler is ready to be managed remotely simply with a smartphone. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance Technical features Model : Bluehelix Pro RRT 24 C Energy label specifications according to the European ErP directive Heating energy efficiency class: A Sanitary energy efficiency class XL profile: A NOx class : 6 Characteristics of heating/DHW operation: Heating Thermal Power: 20 kW Thermal Power in Sanitary: 24 kW Maximum Heating Power 80°C - 60°C : 20 kW Useful Thermal Efficiency 80°C - 60°C: 98.1% Useful Thermal Efficiency 50°C - 30°C : 106.1% Domestic hot water production Δt 30°C: 11.5 l/min Domestic hot water production Δt 25°C: 13.8 l/min Power supply: methane or LPG Dimensions and weight Extremely Compact Dimensions (HxWxD): 600x400x320 mm Weight : 29Kg Ferroli BLUEHELIX PRO RRT boiler Ecological wall-hung condensing boilers with Ferroli Thermobalance™ DUAL combustion cell .. Evolution Continues With attention to aesthetics and silence, it continues the tradition of appreciation of the previous "Bluehelix Pro" series. The range of generators is equipped with the tested primary heat exchanger for heating and domestic hot water in very thick stainless steel integrated in a single component, INOX DUAL . Designed and built according to the new ErP directives for eco-compatible design and labelling. BLUEHELIX PRO RRT achieves one of the highest energy efficiency in its category both in space heating, ηs 94% (Class A ErP, scale from G to A++), and in domestic water heating, ηwh 93% . Furthermore, when combined with the external probe and the Romeo remote timer control or the new Connect control, it reaches system energy class A+ (scale from G to A+++). Extended Warranty with the "5 Year Carefree" Formula The quality of BLUEHELIX PRO RRT is unquestionable, and Ferroli is ready to put it to the test by offering its customers an extended warranty coverage which also ensures periodic maintenance and legal checks The New Design for Comfort The particularly careful design of BLUEHELIX PRO RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort , so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers. The planning also took care of the design, creating a precious mantle in 3 removable pieces , which descends to cover the connections of the pipes . PRO RRT Inside view Innovative Thermal Unit Ferroli ThermoBalance TM in its 5 Elements Ferroli has oriented the design of the combustion cell and the BLUEHELIX PRO RRT heat exchanger in order to maximize the functional advantages and the constructive sturdiness , as well as the simplicity of maintenance . The single-pipe design, both in the DHW and heating circuits, ensures that any air bubbles in the system do not get trapped in the exchanger, and makes it as easy as possible to clean it with chemical washing, unlike spiral exchangers with double parallel circuit (more common) in which if only one of the circuits is clogged, chemical washing is much more laborious 1. Exchanger: DUAL single-circuit stainless steel exchanger with high passages , resistant to clogging and easy to clean, capable of condensing even in sanitary production 2. Burner door : Self-cooled burner door without insulating panel 3. Burner : Exclusive special stainless steel hemispherical burner with long-life gasket 4. Gas Adaptive : Intelligent " Gas-adaptive " system derived from industrial boilers, which monitors and self-stabilises combustion as the gas + flue conditions vary 5. Fan : Offset fan, to facilitate maintenance of the boiler without disassembly. Integrated smoke anti-reflux clapper for connection to CCS (compliant with UNI 7129) The Combustion Cell Engine The tube that makes up the BLUEHELIX PRO RRT exchanger is made of stainless steel , a material that allows for the creation of an extremely smooth surface , therefore less susceptible to encrusting agents and deposits. Full Condensation The exchanger of the THERMOBALANCE™ DUAL thermal unit of Bluehelix PRO RRT is made using a concentric spiral without joints or welds. An additional pipe for the preparation of domestic hot water is inserted inside the main spiral, which serves the heating system. The latter is not bound to the main coil but remains immersed in the primary system fluid. The integration in a single block, both of the domestic hot water exchanger and of the primary one, reduces the average operating temperatures especially during the production of domestic hot water thus favoring the phenomenon of condensation. Therefore, unlike most of the products in its category, BLUEHELIX PRO RRT is able to condense even during the production of domestic hot water, reaching energy efficiencies among the highest not only in room heating (ηs 94%) but also in domestic water heating (ηwh 93%). The geometry of the exchanger, particularly generous in the useful passage sections both on the heating circuit and on the domestic hot water circuit, allows the exchanger of the THERMOBALANCE™ DUAL heating unit to operate almost at maximum design efficiency even in conditions of possible partial blockage. The serpentine conformation contrasts the deposit of impurities not only due to the regularity of the path crossed by the water, but also due to the "centrifugal" effect (SELF CLEANING) imprinted on the water itself on the walls of the serpentine. Furthermore, the absence of parallel circuits , both on the heating and DHW side, makes any chemical washing operations of the exchanger and the elimination of any air present in the system circuit extremely easy. Connect The new remote control New wireless remote control available as an accessory for home comfort management also from a smartphone using the connect app (iOS and Android) . Maximizes room comfort with delivery temperature modulation through the Room Climatic Compensation (CCA) and External Climatic Compensation (CCE) functions via the external temperature detectable directly from the internet (or from an optional external probe). It improves the average seasonal efficiency in space heating by +4%. External Climatic Compensation By reading the external temperature (from the internet or from the optional external probe) the system is able to vary the system temperature according to the external temperature measured on the basis of configurable climatic curves, thus guaranteeing the user maximum room comfort as the the external climatic conditions Environmental Compensation The modulating function of CONNECT allows modulation of the boiler power as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings Panel Boiler Control , Commands and Functions The control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to one's needs . The key control panel and the simple LCD display make the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Thanks to the remote connection via bus, this can also be done directly from the Romeo remote control. The card is protected by an easily accessible fuse thanks to the dedicated flap and the electrical connections benefit from a robust and large box, with easily accessible connectors and numerous cable ties. The boiler is also set up to connect a second room thermostat to the dedicated terminals to manage multi-zone mixing systems MC 2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC 2 : Multi Combustion Control , the new combustion system with patented gas-adaptive technology improves the adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) Easy Maintenance Hassle-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the THERMOBALANCETM DUAL heating unit allows maintenance to be carried out with maximum precision and speed. Some examples: Internal accessibility is favored by the 3-piece mantle with removable side panels The electrical box of the electronic card can be easily extracted from the chassis and hooked laterally, leaving free access to the internal parts The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger unit The burner door is totally self-air-cooled and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-manifolded single-pipe circuit, both on the DHW and heating circuits The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections Simplified Replacement Flue outlet ø 50 mm The new boiler can also be installed with 50mm diameter ducting outlets. Particularly important in the replacement market in the frequent case of collective flues that require "heavy" ducting where it is necessary to have a high fume expulsion capacity even with reduced diameters Collective under pressure FPS: Fume Protection System. The flue clapet valve (installed as standard) allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard . For installers, the solution of the pressurized collective flue is more economical (reduction of of fireplaces) Comfort and Safety Functions The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life for the appliance Stop and go function With the use of sanitary mixing taps, short or very short dispensing for quick rinses involve the start of the boiler ignition procedure which usually ends immediately. The continuation of these " false starts " can, in the long run, compromise the average life of the product. For this reason BLUEHELIX PRO RRT provides an electronic parameter through which it is possible to delay burner ignition (Stop and Go) by activating it only in the face of actual withdrawals of domestic hot water Sun Easy function BLUEHELIX PRO RRT has been designed to be easily inserted into systems made with the latest technologies. The SUN EASY system makes use of electronics that simplify the combination with solar panels with both natural and forced circulation. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water preheated by the solar panels, foreseeing the ignition of the burner only if the latter falls below the level necessary to guarantee optimal comfort for the user Self-Cleaning function The generous cross-section of the exchanger pipes , both on the plant and sanitary side, allows for a large passage of water . Furthermore, the "centrifugal" effect given to the water by the coil shape of the single-circuit exchanger generates a self-cleaning effect on the walls which counteracts the deposit of impurities . Finally, the absence of circuits in parallel, both on the heating and DHW sides, makes any chemical washing operations of the exchanger and the elimination of any air present in the system circuit extremely easy . Outdoor installation - Antifreeze function To make the most of the available space, the new BLUEHELIX PRO RRT 24C boiler can be installed recessed into the wall thanks to the special kit; for more critical installations, in completely uncovered places not protected from atmospheric agents, the "painted cabinet" kit is also available. In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost . This function is active with the boiler powered by the gas circuit and under electrical voltage Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Overview CHAFFOTEAUX URBIA GREEN Ebus2 25 EU CONDENSING BOILER Cod. 3310407, COMPLETE WITH FUME EXHAUST KIT - NEW ErP: Wall-mounted condensing boilers with 4 liter mini-accumulator. Technical specifications Product code: 3310407 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Rated heat output max/min (Hi) Qn:ÿ22/2,5ÿkW Useful heating power80§ C/ 60§ C max/minÿ21,5/2,4ÿkW Useful heating power50§ C/ 30§ C max/minÿ23,4/2,6ÿkW Sanitary nominal thermal power max/min (60/80§C) PCI:ÿ25/ 5.5 kW Efficiency at nominal heat input:ÿ97.8% Efficiency 30% of nominal heat input:ÿ109.1% Energy efficiency stars: (dir 92/42/EEC) **** Capacity of the expansion vessel: 8 lt Maximum system water capacity: 100/300 litres Sanitary comfort stars(EN13203): *** Port. specific in healthcare (10 min. with T= 30øC): 13.2 l/min Hot water flow rate at T 25§ C: 14.6 l/min Degrees of protection for the electrical system:ÿIPX5D Nox class: 5 Dimensions hxwxd: mmÿ745 x 440 x 375ÿ; 42kg METHANE power supply Features list URBIA GREEN Ebus2 EU Urbia Green is the ideal solution for all homes where the best performance is required. It is a concentration of advantages in terms of sanitary comfort with reduced dimensions and consumption. Thanks to condensing technology and integration with solar systems, it maximizes energy savings and the 4-litre sanitary reserve satisfies the needs of the most demanding users. Sanitary comforts Mini-accumulintegrated in 316L stainless steel of 4 liters. Domestic hot water performance ***, maximum level not foreseen by the EN 13203 standard. Flow rate from 14.6 to 19.3 l/min with T = 25§C. DHW production controlled by a modulating turbine to respond to needs without waiting times and at a constant temperature, even when extractions are very low. DHW programmer to control the tank heating time slots Eco-Delta System: DHW load system with 4 liter reserve to further improve the comfort of DHW production and new ecological functions which allow you to save energy in DHW mode. Heating comfort Efficiencyfinal 108% with energy savingsfinal 35%. 4-star combustion efficiency according to the EN 92/42 standard. SRA function, automatic boiler regulation system according to heating requirements. Modulation wide range, from 10% to 100% of the maximum power. Reduced polluting emissions, NOx class 5. Pressure sensor of the heating circuit with visualization on LCD display. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Differentiated climatic thermoregulation of 2 circuits, according to the room and/or outside temperature. Arrangement for integration into a heating system via the newÿEbus2 communication protocolÿ(boilers, solar, system management modules, modulating thermoregulation accessories). Multifunction LCD display with display: history, self-diagnosis, operating temperature. Filling taps integrated in the boiler. Convenience of installation use Compatible with Expert Control: intuitive system manager for the management of 3 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings. New intuitive electrical connections. Easier start-up: automatic purge function and directly accessible combustion adjustment. Save energy and respect the environment Final 25% energy savings in combination with Expert Control and the SRA function. Final 35% energy savings combine and Expert Control, the SRA function, the external probe and the radiant floor. 40% reduction in CO2 emissions**. ERP extension From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION FOR THE GAS TRANSFORMATION, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE BERETTA MYNUTE RAIN GREEN AND 25 CSI BOX CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP Code: 20096647 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 20 kW Sanitary nominal heat input: 25 kW Classification European Directive EEC 92/42: **** Quantity of hot water with Δt=25°C: 14 l/min Dimensions (hxlxp) mm 1223 x 654 x 255 + 26 Net weight of boiler + box kg 39+20 METHANE power supply C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control) Exclusive services: Beretta offers 5 or 10 years of peace of mind thanks to the Kasko warranty extension formulas. Standard: BeSMART Remote Control Panel and external probe in the BOX version (class A+) General characteristics 1) Mynute Rain Green E BOX - ErP The new Mynute Rain Green E outdoor range (down to -10°C with special kits), offers three models suitable for "wall" installation and a specific version for "recessed" installation. Designed following the ecodesign indications provided for by the European ErP Directive, it is made up of combined and heating only models. The boilers have a higher power in DHW operation thus offering greater comfort. Mynute Rain Green E is equipped with the new front access condensing exchanger which allows high yields (94% seasonal yield) and with the new low consumption modulating circulator which can be configured according to the type of system. Mynute Rain Green E is compatible with the optional BeSMART WiFi Comfort Control Kit which allows remote comfort control from smartphones and tablets using special free APPs and together they form a class A+ system. Mynute Rain Green E is compatible with the new Ø 50 mm flue with which it is possible to carry out ducting up to 49 m (25 CSI and 25 RSI versions). 2) Mynute Green E: high energy efficiency, reduced gas consumption and low emissions. The entry into force of the European Directive ErP (26.09.2015) provides that even generators for the production of heating and domestic hot water are classified through the appropriate energy label indicating the class. Compulsory labeling provides greater transparency on the characteristics of the products which can be easily compared, helping the user to find those with greater efficiency. Consequently, even with boilers it will be easier to contribute to the achievement of the "20-20-20" objective set for the year 2020 which consists of: reducing greenhouse gas emissions (CO2 ) by 20%, increasing by 20 % use of renewable energies and reduce energy consumption by 20% in EU countries. 3) The new Beretta condenser exchanger with front access The Mynute Green E boiler is equipped with the new Beretta condensing exchanger with front access. An innovative system of guides allows it to move like a drawer, making disassembly for cleaning required by current regulations much faster. Continuous research has allowed Beretta to obtain an exchanger characterized by a considerable increase in performance: 94% average seasonal efficiency calculated according to the European ErP Directive. The exchanger comes from a single aluminum tube, without welding thanks to an innovative production process. The high thermal conductivity of aluminium, much higher than that of steel, allows for greater uniformity in temperature distribution. The single pipe architecture (series circuit) allows for a large section for the passage of water with the advantage of reducing pressure drops and preventing the deposit of impurities, keeping the exchanger performing over time. With the new Beretta condensing exchanger, boiler performance improves up to an average seasonal efficiency of 94%. 4) Flex modulating circulators: optimized performance, low consumption Mynute Green E uses a synchronous modulating circulator with low energy consumption, as required by the European ErP Directive. Thanks to this new technology, the electric motor of the circulator offers an Energy Effi ciency Index of less than 0.20, which means significantly reduced electricity consumption. The new circulator works proportionally to the power supplied by the boiler, thus contributing to a further reduction in electricity consumption. In case of need on the heating system, it is possible to change the head without having to replace the standard circulator with a high head one, the name “Flex” derives from this feature. Up to 49 meters of ducting With Mynute Green E it is possible to comfortably intubate even the most "difficult" flues thanks to the approval for flue Ø 50mm. The main 50mm flue ducts are available in the Beretta price list catalogue, while the boiler manuals provide indications of the maximum length, which differ according to the boiler power. The simplicity of comfort The management, simple and intuitive, favors the understanding and use of all the functions. There are two control selectors for setting the adjustment functions: heating temperature selection knob and domestic hot water knob. Boiler status indications are shown on the display. The filling of the system is carried out simply thanks to the practical filling cock and the visible control hydrometer. [ 1 ] Digital display [ 2 ] Selector on/off/summer/winter/reset/heating temperature/activation of the Clima Amico system [ 3 ] Domestic hot water temperature selector/preheating activation [ 4 ] Hydrometer Characteristics: Class A+ system without the addition of options Specific for use in built-in BOX Low consumption modulating circulator (6 m head) Low polluting emissions: class 5 (UNI EN 483) New condensing exchanger in aluminum with high flow rate and front access Thermoregulation with standard external probe REC 08 remote control panel as standard Antifreeze kit available up to -10°C (optional) Possibility of intubating flues with the special flue ø 60 in PP and ø 50 in PP IPX5D electrical protection degree Plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less