Overview CHAFFOTEAUX URBIA GREEN Ebus2 25 EU CONDENSING BOILER Cod. 3310407, COMPLETE WITH FUME EXHAUST KIT - NEW ErP: Wall-mounted condensing boilers with 4 liter mini-accumulator. Technical specifications Product code: 3310407 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Rated heat output max/min (Hi) Qn:ÿ22/2,5ÿkW Useful heating power80§ C/ 60§ C max/minÿ21,5/2,4ÿkW Useful heating power50§ C/ 30§ C max/minÿ23,4/2,6ÿkW Sanitary nominal thermal power max/min (60/80§C) PCI:ÿ25/ 5.5 kW Efficiency at nominal heat input:ÿ97.8% Efficiency 30% of nominal heat input:ÿ109.1% Energy efficiency stars: (dir 92/42/EEC) **** Capacity of the expansion vessel: 8 lt Maximum system water capacity: 100/300 litres Sanitary comfort stars(EN13203): *** Port. specific in healthcare (10 min. with T= 30øC): 13.2 l/min Hot water flow rate at T 25§ C: 14.6 l/min Degrees of protection for the electrical system:ÿIPX5D Nox class: 5 Dimensions hxwxd: mmÿ745 x 440 x 375ÿ; 42kg METHANE power supply Features list URBIA GREEN Ebus2 EU Urbia Green is the ideal solution for all homes where the best performance is required. It is a concentration of advantages in terms of sanitary comfort with reduced dimensions and consumption. Thanks to condensing technology and integration with solar systems, it maximizes energy savings and the 4-litre sanitary reserve satisfies the needs of the most demanding users. Sanitary comforts Mini-accumulintegrated in 316L stainless steel of 4 liters. Domestic hot water performance ***, maximum level not foreseen by the EN 13203 standard. Flow rate from 14.6 to 19.3 l/min with T = 25§C. DHW production controlled by a modulating turbine to respond to needs without waiting times and at a constant temperature, even when extractions are very low. DHW programmer to control the tank heating time slots Eco-Delta System: DHW load system with 4 liter reserve to further improve the comfort of DHW production and new ecological functions which allow you to save energy in DHW mode. Heating comfort Efficiencyfinal 108% with energy savingsfinal 35%. 4-star combustion efficiency according to the EN 92/42 standard. SRA function, automatic boiler regulation system according to heating requirements. Modulation wide range, from 10% to 100% of the maximum power. Reduced polluting emissions, NOx class 5. Pressure sensor of the heating circuit with visualization on LCD display. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Differentiated climatic thermoregulation of 2 circuits, according to the room and/or outside temperature. Arrangement for integration into a heating system via the newÿEbus2 communication protocolÿ(boilers, solar, system management modules, modulating thermoregulation accessories). Multifunction LCD display with display: history, self-diagnosis, operating temperature. Filling taps integrated in the boiler. Convenience of installation use Compatible with Expert Control: intuitive system manager for the management of 3 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings. New intuitive electrical connections. Easier start-up: automatic purge function and directly accessible combustion adjustment. Save energy and respect the environment Final 25% energy savings in combination with Expert Control and the SRA function. Final 35% energy savings combine and Expert Control, the SRA function, the external probe and the radiant floor. 40% reduction in CO2 emissions**. ERP extension From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION FOR THE GAS TRANSFORMATION, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE BERETTA MYNUTE RAIN GREEN AND 25 CSI BOX CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP Code: 20096647 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 20 kW Sanitary nominal heat input: 25 kW Classification European Directive EEC 92/42: **** Quantity of hot water with Δt=25°C: 14 l/min Dimensions (hxlxp) mm 1223 x 654 x 255 + 26 Net weight of boiler + box kg 39+20 METHANE power supply C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control) Exclusive services: Beretta offers 5 or 10 years of peace of mind thanks to the Kasko warranty extension formulas. Standard: BeSMART Remote Control Panel and external probe in the BOX version (class A+) General characteristics 1) Mynute Rain Green E BOX - ErP The new Mynute Rain Green E outdoor range (down to -10°C with special kits), offers three models suitable for "wall" installation and a specific version for "recessed" installation. Designed following the ecodesign indications provided for by the European ErP Directive, it is made up of combined and heating only models. The boilers have a higher power in DHW operation thus offering greater comfort. Mynute Rain Green E is equipped with the new front access condensing exchanger which allows high yields (94% seasonal yield) and with the new low consumption modulating circulator which can be configured according to the type of system. Mynute Rain Green E is compatible with the optional BeSMART WiFi Comfort Control Kit which allows remote comfort control from smartphones and tablets using special free APPs and together they form a class A+ system. Mynute Rain Green E is compatible with the new Ø 50 mm flue with which it is possible to carry out ducting up to 49 m (25 CSI and 25 RSI versions). 2) Mynute Green E: high energy efficiency, reduced gas consumption and low emissions. The entry into force of the European Directive ErP (26.09.2015) provides that even generators for the production of heating and domestic hot water are classified through the appropriate energy label indicating the class. Compulsory labeling provides greater transparency on the characteristics of the products which can be easily compared, helping the user to find those with greater efficiency. Consequently, even with boilers it will be easier to contribute to the achievement of the "20-20-20" objective set for the year 2020 which consists of: reducing greenhouse gas emissions (CO2 ) by 20%, increasing by 20 % use of renewable energies and reduce energy consumption by 20% in EU countries. 3) The new Beretta condenser exchanger with front access The Mynute Green E boiler is equipped with the new Beretta condensing exchanger with front access. An innovative system of guides allows it to move like a drawer, making disassembly for cleaning required by current regulations much faster. Continuous research has allowed Beretta to obtain an exchanger characterized by a considerable increase in performance: 94% average seasonal efficiency calculated according to the European ErP Directive. The exchanger comes from a single aluminum tube, without welding thanks to an innovative production process. The high thermal conductivity of aluminium, much higher than that of steel, allows for greater uniformity in temperature distribution. The single pipe architecture (series circuit) allows for a large section for the passage of water with the advantage of reducing pressure drops and preventing the deposit of impurities, keeping the exchanger performing over time. With the new Beretta condensing exchanger, boiler performance improves up to an average seasonal efficiency of 94%. 4) Flex modulating circulators: optimized performance, low consumption Mynute Green E uses a synchronous modulating circulator with low energy consumption, as required by the European ErP Directive. Thanks to this new technology, the electric motor of the circulator offers an Energy Effi ciency Index of less than 0.20, which means significantly reduced electricity consumption. The new circulator works proportionally to the power supplied by the boiler, thus contributing to a further reduction in electricity consumption. In case of need on the heating system, it is possible to change the head without having to replace the standard circulator with a high head one, the name “Flex” derives from this feature. Up to 49 meters of ducting With Mynute Green E it is possible to comfortably intubate even the most "difficult" flues thanks to the approval for flue Ø 50mm. The main 50mm flue ducts are available in the Beretta price list catalogue, while the boiler manuals provide indications of the maximum length, which differ according to the boiler power. The simplicity of comfort The management, simple and intuitive, favors the understanding and use of all the functions. There are two control selectors for setting the adjustment functions: heating temperature selection knob and domestic hot water knob. Boiler status indications are shown on the display. The filling of the system is carried out simply thanks to the practical filling cock and the visible control hydrometer. [ 1 ] Digital display [ 2 ] Selector on/off/summer/winter/reset/heating temperature/activation of the Clima Amico system [ 3 ] Domestic hot water temperature selector/preheating activation [ 4 ] Hydrometer Characteristics: Class A+ system without the addition of options Specific for use in built-in BOX Low consumption modulating circulator (6 m head) Low polluting emissions: class 5 (UNI EN 483) New condensing exchanger in aluminum with high flow rate and front access Thermoregulation with standard external probe REC 08 remote control panel as standard Antifreeze kit available up to -10°C (optional) Possibility of intubating flues with the special flue ø 60 in PP and ø 50 in PP IPX5D electrical protection degree Plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input kW 24.7 Heating nominal heat input kW 20.6 Sanitary nominal thermal power kW 24 Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.7% Efficiency at 100% Pn (50-30°C): 105.8% Expansion/pre-charge vessel capacity l/bar 8/0.8 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 13.8 Degree of protection: IPX5D NOx class (EN 483) 5 Dimensions (h x w x d): 763 x 450 x 345 mm ; 38.5 kgs Power supply: LPG To view more product information CLICK HERE General characteristics Luna Duo-Tec+ Wall mounted gas condensing boilers ideal for both new build and replacement The new Duo-tec+ range of gas-fired condensing boilers has been specifically designed in compliance with the requirements of the Ecodesign and Labeling Directives, to make it particularly suitable both for new buildings and for replacing an old generator. In fact, in addition to the already known advantages of condensing technology such as high efficiency, energy saving and reduced polluting emissions, the new Duo-tec+ condensing boilers are characterized by: Complete range of models : heating only, with instantaneous DHW production, with integrated micro-storage tank, with integrated 40-litre storage tank. The range also includes the compact version (Compact+), the first Baxi condensing boiler in just 70 cm in height and 30 cm in depth. Digital control panel with backlit LCD display Wide modulation range 1:7 the reduction of on/off cycles translates into significant benefits in terms of energy savings and lower emissions Digital control panel The Duo-tec+ range of boilers is equipped with a digital control panel with backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and the heating. The display allows you to view all the information and set the operating parameters in a clear and immediate way. Wide modulation range 1:7 greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of the continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises Gas Adaptive Control The innovative GAC ( Gas Adaptive Control ) automatic combustion control system guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the actual power dissipated from the building avoiding excessive heating/cooling of the building. Total modulation pump The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ∆T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs Characteristics: Wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control High efficiency circulation pump with total modulation Digital control panel with large backlit LCD display Arrangement for combination with the Baxi integrated solar system Ø50 mm exhaust pipe: solution for restoring flues - mod. 24 kW ErP/EcoDesign – Mandatory labeling from September 2015 Why ErP (Energy related Products)? To be placed on the EU market, a product must have the brand , or comply with all the European Directives applicable to it. The Ecodesign and Labeling Directives (eco-design and energy labelling) were created to help the EU achieve the objectives of the EU 20-20-20 Plan, with a particular focus on reducing CO2 emissions by 20%, the increase energy efficiency by 20% and to increase the use of renewable energies by 20%, all by 2020. For this reason, all heat generators for space heating, appliances for the production of DHW and systems of several of these appliances combined in combination will have to comply with eco-design requirements and be labelled, in accordance with the implementing regulations, for be able to be placed on the market by the producers. From 26 September 2015 , the directives will affect all the products described above with a Pn ≤ 400 kW for eco-design and with a Pn ≤ 70 kW for labeling, destined for the markets of all countries of the European Economic Area. Which directives are affected? 2009/125/EC Ecodesign requirements – Regulation 622/12 (ex 641/09 ref. circulators) – Regulations 813/13 and 814/13 2010/30/EU Requirements for energy labeling and classification – Regulations 811/ 13 and 812/13 How does the placing on the market take place? Placing on the market is carried out by the manufacturer (or by the importer from outside the EU) when the product is made available for the first time on the EU market. This happens when ownership changes to a distributor (invoice). What products can be sold? All products with the CE mark placed on the market before 01/08 and 26/09 2015 are considered compliant and therefore salable until they run out. All products that will be placed on the market (sold) by the manufacturer/importer after these dates will have to comply with the new standards. What is a product according to ErP (Ecodesign)? A luminaire designed to operate at maximum efficiency with minimum environmental impact. To comply with this directive, the product must have Pn ≤ 400 kW and, as regards hot water tanks, a volume ≤ 2000 litres. Manufacturers are obliged to place only ErP-compliant products on the market with these deadlines: from 1 August 2015 only products equipped with high efficiency pump from 26 September 2015 only products that meet the minimum ErP efficiency requirements Ecodesign defines the requirements that products must meet in order to be placed on the market, based on: Seasonal efficiency for heating and efficiency for DHW production based on the declared load profile Emissions (NOx values) Maximum permissible noise level of hydronic heat pump outdoor units What is a Combi product according to ErP? An appliance (single or with boiler) for heating and DHW production, already equipped with labeling with energy class information relating to a DHW load profile. What is a load profile in ACS? For mixed heat generators and DHW producers, the regulations define a certain sequence of water withdrawals as a load profile, essentially a simulation of daily operation of the product, with different withdrawals at established times, flow rates and ∆t . Therefore a product must be able to deliver the declared profile, on which the efficiency in obtaining it will then be calculated, which will determine the class declared on the label. For example: Examples: L profile XL profile XXL profile What is the Energy Label? The labeling directive (2010/30/EU) requires products to be labeled according to a decreasing energy scale ranging from A + + + to G. There is also an energy label for the installed system, depending on the components used ( for example a boiler, DHW tank and room temperature controls). The label was created for the final consumer, providing real and comparable data, to make informed choices and targeting high-efficiency products. There are energy labels: of product: system : Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features ErP energy efficiency class (heating and DHW): A  Load profile: XL Nominal heat input 28.9 kW Nominal thermal power 28 kW Energy efficiency (92/42/EEC) **** Nominal efficiency 80/60°C % 97.6 Return at 30% % 108.8 Heating circuit water temperature control °C 25-80 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 16.1 Minimum domestic water flow rate: 2 l/min Minimum operating temperature: -15°C Expansion/pre-charge vessel capacity l/bar: 8/0.8 NOx class (EN 483): 5 Electric power W 99 Degree of protection IPX5D Dimensions (hxlxp) - with case: mm 1170 x 600 x 245 Dimensions (hxwxd) - boiler 770 x 470 x 238 mm; 32.5kg Power supply: METHANE Luna Duo-Tec IN+ The efficiency of compact built-in comfort Baxi has always offered the ideal system solution for any type of home: for this reason the Duo-tec+ range is expanding with built-in models and for outdoor installation. Luna Duo-tec IN+ is the built-in condensing boiler, specifically designed to make it suitable for replacing an old built-in generator but also in new installations. The extremely compact dimensions of the boiler facilitate its installation in small/medium-sized apartments, and in general in all housing units where efficient space management is an important objective (for example in technical rooms or in the presence of ) Recessed installation outdoors Luna Duo-tec IN+ is the built-in condensing boiler, specifically designed to make it suitable for replacing an old built-in generator but also in new installations. The extremely compact dimensions of the boiler facilitate its installation in small/medium-sized apartments, and in general in all housing units where efficient space management is an important objective (for example in technical rooms or in the presence of ). The packing contains the bracket and installation fittings for inserting the boiler into the containment case Characteristics: Wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control Automatic plant loading system Minimum operating temperature: -15°C Remote digital control panel with LCD display Arrangement for combination with the Baxi integrated solar system High efficiency circulation pump with total modulation Ultra-compact dimensions: 770x470x238 mm (boiler) STANDARD installation kit (gas cock / gas inlet / telescopic fittings) Antifreeze function and IPX5D degree of protection Digital control panel The Duo-tec+ range of boilers is equipped with a digital control panel with backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and the heating. The display allows you to view all the information and set the operating parameters in a clear and immediate way. Gas Adaptive Control The innovative GAC ( Gas Adaptive Control ) automatic combustion control system guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the actual power dissipated from the building avoiding excessive heating/cooling of the building. Antifreeze function The boilers have been designed to allow the boiler to operate down to -15°C. Furthermore, the antifreeze function provides for the automatic ignition of the burner, avoiding freezing phenomena. Wide modulation range 1:7 greater efficiency given by less switching on and off: with a high modulation ratio, the reduction of continuous switching on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ARISTON GENUS PREMIUM EVO CONDENSING BOILER IN 25 EU COMPLETE WITH LPG - ErP FUME KIT Technical features Product code: 3300736 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 22/2.5 Max/min heating thermal power (80°C-60°C) kW 21.5/2.4 Efficiency at nominal heat input (60/80°C) % 97.8 Efficiency at nominal heat input (30/50°C) % 106.2 Efficiency at 30% at 30°C % 109 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 20/ 45 Min operating temperature* °C -15 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 12.2 Quantity of hot water ∆T=25°C litres/min 14.6 Quantity of hot water ∆T=35°C litres/min 10.4 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 78 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 1140/590/240 Extremely small dimensions to adapt to any space problem. METHANE power supply Standard: Sensys system manager with integrated time programming General characteristics Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. EVO: energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the energy certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy. Genus Premium Evo IN Genus Premium Evo In is the wall-mounted condensing boiler expressly designed for built-in installation. Small dimensions and reduced weight, its implementation is extremely simple. This without giving up the safety that distinguishes Ariston, i.e. exceptional resistance to cold (up to -15°C) and electrical protection from water and dust that reaches the highest levels (IPX5D classification). High efficiency product with low consumption thanks to the 1:10 modulation ratio and the high efficiency circulator with continuous modulation Characteristics: Built-in condensing boiler with auto function and info top Sensys system manager with integrated time programming Continuous modulation high efficiency circulator Modulation ratio 1:10 Universal built-in unit in electro-galvanized sheet metal (to be ordered with separate code) Possibility of outdoor installation thanks to all weather protection systems. Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort External probe integrated in the boiler Semi-automatic filling Circular anti-freeze, anti-limescale and anti-blocking protection Increased sanitary exchanger Cold water inlet and heating return filters Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Genus Premium Evo EXT thanks also to the high modulation ratio 1:10, the continuously modulating pump and the presence of side sound-absorbing panels. High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.  

Read more less

Technical features Model : Luna Alux 24 Ga ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input kW 24.7 Heating nominal heat input kW 20.6 Sanitary nominal thermal power kW 24 Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.7% Efficiency at 100% Pn (50-30°C): 105.5% Expansion/pre-charge vessel capacity l/bar 8/0.8 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 13.8 Degree of protection: IPX5D NOx class (EN 483) 5 Dimensions ( HxWxD ) : 763 x 450 x 345 mm Weight : 42Kg Power supply: methane Wall-hung gas condensing boilers ideal for replacing old systems with cast iron/lamellar steel radiators The new condensing range Luna Alux is divided into two models, 24 and 33 kW for heating and instant domestic hot water production. Luna Alux was designed in compliance with the requirements of the Ecodesign and Labeling Directives. The labeling directive (2010/30/EU) requires the labeling of products according to a decreasing energy scale that goes from A++ to G starting from 09/26/2015 and from A+++ to D from 09/26/2019. The label was created to allow the final consumer, by providing true and comparable data, to make informed choices by targeting high-efficiency products. Exclusive design aluminum heat exchanger Luna Alux is the new Baxi condensing boiler equipped with a corrosion-resistant aluminum-silicon alloy exchanger which makes this boiler particularly solid. The exchanger, designed and produced on an exclusive Baxi design, has been studied with large water passage sections to make the boiler particularly suitable for replacement in old heating systems with cast iron or lamellar steel radiators In these types of systems, the replacement of the existing boiler with a new LUNA ALUX: Significantly lowers the risk of clogging due to impurities in the system water Makes operation particularly quiet The high water content inside the exchanger determines: Less temperature fluctuations Increased overheat protection More effective DHW pre-heating Furthermore, the exchanger can be inspected and this facilitates periodic maintenance Digital control panel The Luna Alux range of boilers is equipped with a digital control panel with backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and the heating. The display allows you to view all the information and set the operating parameters in a clear and immediate way. Efficiency and savings Wide modulation range: Greater efficiency given by less switching on and off: with a high modulation ratio, the reduction of continuous switching on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises Hydraulic group in brass Baxi has chosen to maintain quality in its components. The brass hydraulic group, in fact, is a guarantee of: Robustness Greater durability Recyclability Wide modulation range 1:7 greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions • power adjustment produced at the dissipated power thus avoiding excessive overheating/cooling of rooms A Gas Adaptive Control The innovative GAC (Gas Adaptive Control) automatic combustion control system guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the actual power dissipated from the building avoiding excessive heating/cooling of the building. High efficiency total modulation pump The Alux range is equipped with a high-efficiency, fully modulated circulation pump. The pump is equipped with a permanent magnet motor with a variable rotation speed controlled by the boiler board. The high efficiency total modulation pump allows: Lower electricity consumption Better performance Greater durability Characteristics: Wide modulation range 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control to constantly maintain the maximum efficiency values ​​(operation on methane only) High efficiency circulation pump with total modulation Aluminum-silicon alloy exchanger with large water passage sections Hydraulic group in brass 10 liter expansion vessel (mod. 33) Easy maintenance thanks to front access to components Digital control panel with large backlit LCD display Arrangement for combination with the Baxi integrated solar system Electronic system deaeration function to facilitate air removal during initial ignition Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Product code: 3310337 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Nominal max/min heat output (Hi) Qn : 31/7.0 kW Useful heating power 80º C/ 60º C max/min 30.3/6.7 kW Useful heating output 50º C/ 30º C max/min 33.1/7.4 kW DHW nominal thermal power max/min (60/80ºC) PCI: 35/ 6 kW Efficiency at nominal heat input: 97.6% Efficiency at 30% of the nominal heat input: 108.7% Energy efficiency stars: (dir 92/42/CEE) **** Expansion vessel capacity: 10 l Maximum water capacity of the system: 100/300 litres Sanitary comfort stars (EN13203): *** Specific flow rate in accordance with EN 625 at Δt 30ºC : 23 l/min Hot water flow rate at ∆T 35º C: 19.7 l/min Hot water flow rate at ∆T 25º C : 27.6 l/min Maximum absorbed power; W 77 Electrical system protection degree: IPX5D Nox class: 5 Dimensions hxwxd: mm 900 x 600 x 465 ; 60kg METHANE power supply NIAGARA C GREEN Ebus2 EU Condensation associated with sanitary comfort (2 20-litre boilers) integrated in just 60 cm wide for total comfort. Power, compact dimensions and high technology for the most demanding. Sanitary comfort 40 liter reserve thanks to 2 standard stainless steel inter-accumulators. Stratified storage tanks: the advantage of domestic hot water storage and instantaneous production. Permanent availability of domestic hot water even if the accumulated hot water reserve runs out. Power optimization thanks to a continuous modulation of the DHW pump flow rate. Domestic hot water performance ***, maximum level foreseen by the EN 13203 standard. Flow rate of 27.6 l/min with ΔT = 25ºC. Integrated 2-litre sanitary expansion tank. Heating comfort 4-star combustion efficiency in compliance with the EN92/42 standard. High modulation range from 25% to 100%. Total premix modulating burner and stainless steel heat exchanger. Modulating fan and pump to improve acoustic comfort and reduce energy consumption. Climatic thermoregulation for the management of 2 circuits, according to the ambient and/or external temperature for greater comfort and greater energy savings. Front panel programming with drop-down menu: history, permanent self-diagnosis, operating temperature, weekly programming and display of all information on the settings. SRA function, automatic boiler regulation system according to heating requirements. Comfort of use and installation Easy component management: common internal layout with the rest of the Chaffoteaux range. Easier starting: automatic purge function and directly accessible combustion regulation. Easy maintenance: all components are accessible from the front. Complete solar system regulation (with optional solar clip in). Energy saving Up to 23% energy savings in combination with Easy Control and the SRA function. 40% reduction in CO 2 emissions **

Read more less

ARISTON GENUS PREMIUM EVO 24 EU CONDENSING BOILER COMPLETE WITH METHANE FUME EXHAUST KIT - NEW ErP Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 22/2.5 Max/min heating thermal power (80°C-60°C) kW 21.5/2.4 Efficiency at nominal heat input (60/80°C) % 97.8 Efficiency at nominal heat input (30/50°C) % 106.2 Efficiency at 30% at 30°C % 109 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 20/ 45 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 12.2 Quantity of hot water ∆T=25°C litres/min 14.56 Quantity of hot water ∆T=35°C litres/min 10.4 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 70 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 770/400/315 CNG or LPG power supply Kit for conversion from methane to propane supplied Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. EVO : energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the energy certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy. Genus Premium Evo The Genus Premium Evo wall-mounted boiler is the maximum expression of the Ariston range. Thanks to the condensing technology, by recovering the energy of the exhaust fumes, it generates an increase in the calorific value which makes it possible to eliminate waste (of energy) and to obtain higher thermal efficiency than conventional boilers. Genus Premium Evo offers even greater performance thanks to the innovative technology that allows it to self-regulate based on variations in the external and internal temperature of the room, allowing energy savings of up to 35% compared to an older generation boiler. It is available in the heating and domestic hot water production version in 3 powers: 24-30-35 kW (sealed chamber). Characteristics: Can be installed in partially protected places Large backlit dot matrix screen Continuous modulation high-efficiency circulator: for optimizing consumption and maximizing performance. Modulation ratio 1:10 - Automatic power regulation according to the heating request. Acoustic comfort guaranteed by the lower number of boiler on and off cycles, new silencer and sound-absorbing panels Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Isothermal primary heat exchanger in stainless steel Increased sanitary exchanger Cold water inlet and heating return filters Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Genus Premium Evo thanks also to the high modulation ratio of 1:10, the continuously modulating pump and the presence of side sound-absorbing panels. High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Biasi Basica DGT R NOx 24s condensing boiler with low NOx methane recovery unit complete with flue gas kit - NEW Heating/DHW nominal heat input kW 24.8 Heating/DHW minimum heat input kW 10.0 Heating/DHW maximum useful power 60°/80°C * kW 24.0 Heating/DHW minimum useful power 60°/80°C * kW 9.4 Heating/DHW maximum useful power 30°/50°C ** kW 25.3 Heating/DHW minimum useful power 30°/50°C ** kW 9.7 Quantity of condensate at Q.nom. 30°/50°C (in heating) ** l/h 4.0 Amount of condensate at Q.min. 30°/50°C (in heating) ** l/h 1.6 Condensate pH 4.0 Yield name 60°/80°C * % 96.6 Yield min. 60°/80°C * % 93.9 Yield name 30°/50°C ** % 102.2 Yield min. 30°/50°C ** % 97.0 Yield at 30 % load * % Yield at 30% load ** % 100.9 Energy Efficiency ★★★★ Thermal losses in the chimney with the burner in operation Pf (%) 2.7 Chimney heat losses with burner off ΔT 50°C Pfbs (%) 0.2 Thermal losses to the environment through the casing with burner in operation Pd (%) 1.0 NOx class n° 6 Weighted NOx *** mg/kWh 54 Minimum/maximum heating temperature **** °C 38-85 Minimum/maximum heating pressure 0.3-3 bar Head available for heating (at 1000 l/h) bar 0.247 Expansion vessel capacity (total/useful) l 8 Minimum/maximum sanitary temperature °C 35-60 Minimum/maximum DHW pressure 0.3-10 bar Maximum flow rate (ΔT=25K) / (ΔT=35K) l/min 13.6-9.7 Specific sanitary flow rate (ΔT=30 K) ***** l/min 11.5 Voltage/Power at nominal heat input V~/W 230~/102 Power at minimum thermal capacity W 22 Power at rest (stand-by) W 1 Degree of protection n° IPX4D Minimum/maximum smoke temperature # °C 71/76 Minimum/maximum flue mass flow rate # kg/s 0.0111/0.0135 Minimum/Maximum Air Mass Flow # kg/s 0.0109/0.0130 Length max coaxial flue gas outlet (Ø 60/100 mm / Ø 80/125 mm) m 3.0/4.0 Length max double flue gas outlet (Ø 80+80 mm) m 25.0 Height x Width x Depth mm 758x400x325 Weight kg 42.0 Boiler water content 1.5 l Fuel Methane (G20) - Propane (G31) CNG code 10312.0218.0 BASIC DGT R Condensing boiler with recuperator Basica DGT R NOx completes the BIASI range of condensing boilers with recuperator : perfect for radiator systems and suitable for radiant systems with mixing groups. Basica is the compact condensing boiler that ensures high efficiency, low consumption and respect for the environment. Available for heating and domestic hot water production, in the 24 kW power . Basica DGT R NOx is in class B. Main features Water cooled burner Copper lamellar primary heat exchanger with large exchange surface and double circulation Heat recovery unit with stainless steel plates to exploit the heat of the fumes and transfer it to the water Modulation 1:3 CNG and also LPG Sanitary plate heat exchanger in stainless steel 8 liter expansion vessel High efficiency pump with low energy consumption Integration with BIASI solar systems, using a solar kit Analog pressure reading Arrangement for remote control and external probe Control panel functionality Summer/winter/off selector Heating temperature regulator DHW temperature regulator Analog reading of the pressure (read on the pressure gauge under the boiler) DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history The display operates according to the modes: Remote commands The DGT R NOx Basic Boiler has the choice of 2 class V remote controls available, in the Base and Top versions with weekly chronothermostat functions with up to 4 programmable periods with independent temperatures, in addition to the remote control of all the information on the boiler display Product Guarantee: All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Ariston Condensing Boiler CLAS B ONE 35 Methane or LPG 40 lt storage tank complete with flue gas kit cod. 3301212 Product code: 3301212 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Rated heat input max/min (heating) PCI: 31-5.0 kW Nominal heat input max/min (sanitary) PCI: 34.5-5.0 kW Max/min useful heat output (heating): 30.2-4.7 kW Efficiency at nominal heat input (60/80°C) PCI: 97.3% Efficiency at nominal heat input (30/50°C) PCI: 106.5% Efficiency at 30% (30°C) PCI: 109.3% Max/min heating temperature (high temperature): 82-35°C Max/min heating temperature (low temperature): 45-20°C DHW max/min temperature: 65-40°C Quantity of hot water (deltaT 25°C): 26.5 l/min Quantity of hot water (deltaT 35°C): 18.9 l/min Specific flow rate (first 10' with deltaT 30°C): 22.1 l/min Minimum operating temperature > 0°C Modulation ratio 1:7 Power supply voltage/frequency V/Hz 230-50 Total absorbed electric power: 84W Degree of protection of the electrical system IP X5D Dimensions 24 kW mm (HxWxD) 900 x 600 x 474 Diet: methane or LPG Standard LPG conversion kit Functionality: XtraTech™ stainless steel primary exchanger AUTO, Comfort functions Internal installation ONE Series, the new generation of condensing boilers Serie ONE is the new generation of Ariston condensing boilers, studied down to the smallest detail to guarantee maximum performance for a long time. New XTRATECH™ exchanger: Maximum quality. XtraTech™ it's the new one stainless steel exchanger exclusive* Ariston, the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations. Excellent results, over time. Always connected with Ariston NET Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone. Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET. Absolute efficiency: Thermoregulation in class A+ The ONE condensing boilers achieve very high seasonal performance and thanks to the thermoregulation they obtain class A+! Total Comfort: Innovative functions to meet your needs ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy. Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance. Class B ONE Condensing boiler with integrated 40 liter storage tank Characteristics: XtraTech™ heat exchanger in exclusive Ariston stainless steel, with high head Exchanger passage sections +142% compared to the previous version LCD display 2 stainless steel stratification boilers of 20 lt Class A+ in heating reachable with thermoregulation Modulation ratio 1:7 BusBridgeNet® communication protocol Optimized tank heating logic AUTO and Comfort function Prepared for sanitary recirculation Smoke outlet 80, 60, 50 mm HIGH EFFICIENCY Product characterized by high energy performance, reduction of consumption and polluting emissions. MODULATING CIRCULATOR Modulating circulator for optimizing consumption and maximizing performance SYSTEM MANAGEMENT New communication protocol set up to ensure complete system management. MADE IN ITALY Made entirely in Italy. AUTO FUNCTION Maximum comfort, efficiency and energy savings based on the automatic analysis of the environmental conditions, connected external devices and required performance. COMFORT FUNCTION It speeds up hot water dispensing in two modes: Comfort Plus Mode (always hot water in just 5") and Comfort Mode (hot water for 30' after the last tap). SUPER SILENCE Silent operation in all operating modes. All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

NB: in the absence of the product, the new VMW 26 CS model will be shipped VAILLANT ecoTEC PLUS condensing BOILER VMW 256/5-5+ Technical features: For heating and domestic hot water production Forced draft sealed chamber Heating efficiency class A Sanitary efficiency class A Sanitary load profile XL Nominal thermal power in DHW 25.0 kW Efficiency at 30% 110.0 Performance stars (Dir. 92/42CEE) **** NOx class 5 Path : p » span Words: 712 Degree of protection IP X4 D Expansion tank capacity 10 l Domestic hot water production (ΔT = 30K) 11.9 l/min Power supply V/Hz 230/50 Dimensions HxWxD: 720-338-440 mm; 36 kgs Power supply: methane or LPG Vaillant condensing boiler With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for equipment that uses energy, including energy efficiency. The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes to the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation also at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year.  ecoTEC PLUS VMW+ The most efficient and versatile combi condensing boiler there is. ecoTEC plus. Wall-mounted condensing boilers capable of always guaranteeing maximum efficiency and maximum comfort. This is German quality. ecoTEC plus has always been the most popular Vaillant boiler. Today it guarantees even lower consumption, a further increase in efficiency and versatility and the certainty of immediate sanitary comfort without jolts.  The best of Vaillant technology to satisfy every need Every component and every function of ecoTEC plus has been designed to combine efficiency and reduced consumption in favor of greater respect for the environment. ecoTEC plus self-adapts to your needs by always choosing the most economical solution, mixing the right amount of gas and air; all this with an electrical consumption of less than 2 Watts (less than half of a radio in operation). The combined version satisfies all comfort needs, guaranteeing both constant hot water without sudden changes in temperature and a comfortable climate. Sanitary comfort, in particular, is managed by the efficient Aqua Comfort pre-heating system which, thanks to 4 probes, controls, verifies and guarantees the immediate delivery of hot water always at the same temperature. Lots of hot water, immediately, without sudden changes is the real comfort offered by ecoTEC plus. From today it can also be installed outdoors where the climate is mild even in winter. In fact, the boiler has a standard antifreeze device which allows it to resist down to -5°C. To have heating and domestic hot water in a single solution The VMW ecoTEC plus condensing wall-mounted boilers combine the production of domestic hot water with the heating function. Unlike all the other boilers, the Vaillant ELGA system is installed inside, which expands the modulation range, but above all electronically regulates and monitors combustion to always ensure the lowest gas consumption, guaranteeing maximum efficiency. The boiler adjusts itself automatically and continuously, as if it were assisted every 30 seconds. In addition to a new, simpler and more intuitive design, the new electronics together with a very high efficiency pump make ecoTEC plus VMW+ the wall-mounted condensing boiler that consumes less on the European market. the ecoTEC plus VMW+ boiler is compatible with all Vaillant components and accessories already on the market. The dimensions are reduced 70cm high, 44cm wide and 35cm deep (identical to the previous version), the weight has been optimized making installation easier. and with vSMART... and go to Class A+ (Optional). All models of the ecoTEC plus VMW+ range have an efficiency etas = 94%. For this reason, if combined with a class VI thermoregulation (such as vSMART), they reach a system efficiency of 98% and therefore the ErP energy class in heating A+. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BERETTA MYNUTE RAIN GREEN E 25 CSI CONDENSING BOILER COMPLETE WITH METHANE FUME EXHAUST KIT - NEW ErP Code: 20096642 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 20 kW Sanitary nominal heat input: 25 kW Classification European Directive EEC 92/42: **** Quantity of hot water with Δt=25°C: 14 l/min Dimensions (hxwxd) mm 797 x 553 x 274 METHANE power supply Legend: E (ErP) C (heating + sanitary water) S (sealed chamber) I (electronic ignition, ionisation control) Exclusive services: and Beretta offers 5 or 10 years of peace of mind thanks to the Kasko warranty extension formulas. Mynute Rain Green E - ErP The new Mynute Green E range is designed following the ecodesign indications provided for by the European ErP Directive and is made up of two combined models and a heating only model. The combined versions have a thermal capacity of 20-25 kW and 25-30 kW, values ​​which refer respectively to heating and DHW; similarly, the heating only version has a thermal capacity of 25-30 kW. The range offers as standard the new front access condensing exchanger with improved efficiency (94% seasonal efficiency), the low consumption modulating circulator, the predisposition for the clapet kit (optional) to be used for pressurized flues and the high pressure fan. prevalence to be able to carry out the ducting of flues with Ø 60 or Ø 50 exhausts. Mynute Green E: high energy efficiency, low gas consumption and low emissions. The entry into force of the European Directive ErP (26.09.2015) provides that even generators for the production of heating and domestic hot water are classified through the appropriate energy label indicating the class. Compulsory labeling provides greater transparency on the characteristics of the products which can be easily compared, helping the user to find those with greater efficiency. Consequently, even with boilers it will be easier to contribute to the achievement of the "20-20-20" objective set for the year 2020 which consists of: reducing greenhouse gas emissions (CO2 ) by 20%, increasing by 20 % use of renewable energies and reduce energy consumption by 20% in EU countries. The new Beretta condenser exchanger with front access The Mynute Green E boiler is equipped with the new Beretta condensing exchanger with front access. An innovative system of guides allows it to move like a drawer, making disassembly for cleaning required by current regulations much faster. Continuous research has allowed Beretta to obtain an exchanger characterized by a considerable increase in performance: 94% average seasonal efficiency calculated according to the European ErP Directive. The exchanger comes from a single aluminum tube, without welding thanks to an innovative production process. The high thermal conductivity of aluminium, much higher than that of steel, allows for greater uniformity in temperature distribution. The single pipe architecture (series circuit) allows for a large section for the passage of water with the advantage of reducing pressure drops and preventing the deposit of impurities, keeping the exchanger performing over time. With the new Beretta condensing exchanger, boiler performance improves up to an average seasonal efficiency of 94%. Flex modulating circulators: optimized performance, low consumption Mynute Green E uses a synchronous modulating circulator with low energy consumption, as required by the European ErP Directive. Thanks to this new technology, the electric motor of the circulator offers an Energy Effi ciency Index of less than 0.20, which means significantly reduced electricity consumption. The new circulator works proportionally to the power supplied by the boiler, thus contributing to a further reduction in electricity consumption. In case of need on the heating system, it is possible to change the head without having to replace the standard circulator with a high head one, the name “Flex” derives from this feature. Up to 49 meters of ducting With Mynute Green E it is possible to comfortably intubate even the most "difficult" flues thanks to the approval for flue Ø 50mm. The main 50mm flue ducts are available in the Beretta price list catalogue, while the boiler manuals provide indications of the maximum length, which differ according to the boiler power. The simplicity of comfort The management, simple and intuitive, favors the understanding and use of all the functions. There are two control selectors for setting the adjustment functions: heating temperature selection knob and domestic hot water knob. Boiler status indications are shown on the display. The filling of the system is carried out simply thanks to the practical filling cock and the visible control hydrometer. Characteristics: MYNUTE RAIN GREEN E + external probe + REC 08 remote control forms a class A+ system Antifreeze kit available up to -10°C (optional) ErP boilers with low consumption modulating circulator (EEI0.20) modifiable up to 7m head Low polluting emissions: class 5 (UNI EN 483) New high-flow aluminum condensing exchanger with front access Standard thermoregulation (optional external probe) Arrangement for connection to the REC 08 remote control panel (optional) Possibility of intubating flues with the special flue ø 60 in PP and ø 50 in PP (only ErP boilers) IPX5D electrical protection degree Template, plumbing fittings, gas and sanitary taps supplied For gas conversion, contact authorized Beretta Technical Assistance Centres Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less