FAN COIL FAN COIL AERMEC mod. OMNIA UL 11 with switch included UL listed fan coil units for both horizontal and vertical installation UL: version with switch and cabinet Model: OMNIA UL 11 Cooling capacity: 0.84 - 0.54 kW Thermal power: 2.01 - 1.06 kW Water content: 0.4 litres Dimensions (HxWxD): 513 x 640 x 173 (mm) Plinth Height: 93 (mm) Weight: 12.5 kg White color - Coat RAL 9002 - Headboard and Plinths RAL 7044 General characteristics AERMEC OMNIA UL Fan coils for universal installation for residential use, for heating, cooling and dehumidification, which can be combined with any heat generator. Cooling and heating Wall installation Floor installation Centrifugal fan Centralized control Compatible with VMF (Variable Multi Flow) system For two-pipe systems The units of the OMNIA UL (Universal Line) series are fan coil units suitable for air conditioning. Available in various configurations depending on the installation position, with the possibility of being ducted, they are characterized by multi-speed motors. They have fans in ABS material with an impeller equipped with airfoil fins and an inspectable cochlea. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The UL unit, in the PC version, is equipped as standard with the PLASMACLUSTER ionizing filter, while the RADIANT version is equipped with a radiant plate with on/off motor or inverter. The units can be equipped with multiple accessories and can be integrated into the VMF - Aermec centralized hydronic management system. Versions: UL-S: version without controls, with cabinet. Compatible with the VMF System UL: version with switch and cabinet UL-C: version with electronic thermostat and cabinet UL-PC: version with electronic thermostat, Plasmacluster filter (can be installed on site only) and mobile Characteristics: Cleaning the fan: With Omnia fan coils you can easily clean the fan blades. Now, in fact, it is possible to open the cochlea of ​​the fan (the casing that encloses the blades) and proceed with their periodic cleaning. Cleaning the condensate tray: Thanks to a new fixing system for the condensate collection tray, now, with Omnia fan coils, it can be cleaned easily. This important solution avoids, in the long term, the formation of bacteria, germs and molds in the basin itself, due to the condensation of the humidity present in the air Electrostatically precharged filter: Omnia fan coils are equipped, as standard, with electrostatically precharged air filters. These filters, thanks to their particular construction, absorb and retain suspended dust: the ideal system to guarantee healthy air for the whole family. Silent operation: Thanks to the adoption of special centrifugal fans, the Omnia fan coils have extremely silent ventilation which takes these new fan coils to the top of acoustic comfort thanks to the absence of noise peaks UL listed fan coil units for wall or floor installation EUROVENT certification 3-speed centrifugal fan unit Maximum silence High design aesthetics with rounded lines Adjustable air distribution grille Automatic switch-off of the fan coil by closing the air distribution grille Small dimensions Electronic temperature regulation, automatic speed change on the fan, automatic season change and automatic on - off (version with thermostat) Reversibility of the hydraulic connections during installation Low pressure drop in the heat exchange coils Electric motors with permanently inserted capacitors Ease of installation and maintenance Easy to remove and clean air filter Electrostatically preloaded filter Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : a-LIFE3 202 Power supply (V/Hz/n°) : 230/50/1 White color Indoor Unit Power: 6.4 kW Number of Pipes : 2 NB : The control is not included in the package, it is available as an accessory. General characteristics The a-LIFE3 fan coil is designed to adapt to any environment thanks to a modern and discreet design that concentrates all the experience and know-how of Mitsubishi Electric Hydronic & IT Cooling Systems SPA in this family of products. Double suction centrifugal fan unit and 6 selectable speed autotransformer. Thanks to the availability of various versions, cabinet or built-in, with front or bottom air intake, for horizontal and vertical installations, it is easy to identify the optimal solution for every need. ClimaVeneta Fancoil a-LIFE3-2T-DLMV-102 for professional applications of 1.41 kW in the 2-pipe version with cabinet, with lower air intake, for vertical installation. This fan coil unit is equipped with a centrifugal-type fan assembly with double suction and forward-facing blades with 3 speeds. The left hydraulic connections are easily convertible into right connections with a simple rotation of the exchanger. The class G2 air filter is fitted on all models, whose cover is in galvanized and pre-painted sheet metal. Characteristics Centrifugal type fan unit with double intake to ensure the best performance with the lowest noise level. Directly coupled multi-speed electric motor 6-speed autotransformer Coil with corrugated aluminum fins and copper tubes. Coil with large frontal surface which allows to reach high air flows with very low pressure drops. Hydraulic connections on the left, easily convertible into connections on the right with a simple rotation of the exchanger. Auxiliary condensate collection tray with thermal insulation, in galvanized sheet metal, for all horizontal versions. Auxiliary condensate collection tray in plastic material, for all versions. Configurations for 2 and 4 pipe systems. Air filter on all models. Automatic closing of the control door and protection of the electric controls from possible water falls (compliant with directive CEI EN 60335-2-40). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : IKARO HI-WALL 250 HW Code : THE02D Performance: Cooling Power: 1303 W Heating power: 1629 W Air Flow : 250 m 3 /h Water Flow : 3.75 ~ 4.7 l/min Sound Pressure Level : 12 ~ 16 dB(A) Characteristics: Power supply (V,Hz, Ø) : 220~240/50/1 Power Consumption: 15W Maximum Current : 0.15A Maximum pressure : 1.6MPa Installation Data: Pipe diameter : 12.70 mm RC (1/2") Dimensions and weight: Internal Unit Dimensions (LxHxP): 850x300x198 mm Empty weight : 13 Kg IdealClima IKARO Hydronic Comfosplit Hydronic Terminals with Hydrosilence Technology. Silent and Advanced Solutions Ikaro is the wall-mounted hydronic terminal equipped with the exclusive HydroSilence technology, for unparalleled acoustic and thermal comfort. Specifically designed for residential applications, Ikaro encloses the best PID thermal and electronic technology in a compact and elegant form. Ideal in heat pump systems, and in renewable systems, including solar ones. Quick and effective, it heats, cools and dehumidifies in complete silence The Value of Silence It can deliver the ideal thermal power with unsurpassed silence thanks to the HydroSilence technology. As the desired temperature approaches, the electronic control reduces sound emission and air flows to imperceptible levels, maintaining ideal efficiency in both heating and cooling. Heats, cools and dehumidifies With 5 powers available from 1.1 to 3.3 kW in cooling and from 1.3 to 4.2 kW in heating, Ikaro is the complete solution for hydronic air conditioning, advantageous in systems with modern reversible heat pumps. The dehumidifying effect adds well-being to the rooms in summer. Ikaro has 5 sizes of silence With 5 models available, the choice of Ikaro can be made with extreme flexibility. Even important thermal loads can be satisfied with silence. For example, the 2 KW power Ikaro HW 350 has a noise level of 18 dB at medium speed, the 1.3 KW power Ikaro HW 180 is distinguished by a noise level of only 11 dB Compact, Elegant and Universal Ikaro's design is developed to find a place in the most elegant residential environments: with particular attention also to compactness (less than just 90cm wide). Furthermore, Ikaro can be universally installed with common predisposition boxes for gas splits (h.int>10cm). The convenient fixing plate, which facilitates installation and maintenance thanks to the "tilting hinge" joint, remains completely invisible The modern concept of comfort in domestic environments extends beyond climatic aspects to also include acoustics Hydro Silence technology It is the result of an innovation process aimed at making the consolidated efficiency of hydronic air conditioning integrated with the modern concept of not only climatic comfort, but especially acoustic comfort, indispensable in domestic environments. HydroSilence controls, modulates and actuates in unison the tangential fan unit, the high efficiency coil, the cross-flow technology and the refined electronics with PID algorithms for a unique combination of silence and performance Versatility of Control Each Ikaro can be managed in complete autonomy thanks to the practical infrared remote control supplied as standard, and to the captivating transparent LCD display which shows the temperature at all times. For an even more articulated control, for example within home automation systems, Ikaro is equipped with Modbus connectivity as standard. Ikaro finds its ideal insertion in Integra Benessere, the simple and advanced TermoDomotica by Ideal Clima which allows the control of all the system devices to govern domestic comfort to optimize efficiency and reduce consumption. From the Integra Touch touch screen panel it is possible to control, from a single point, all the functions of the house: air conditioning, hydronic or radiant, controlled ventilation, dehumidification and air quality. The pressure of a finger is enough to operate several devices at the same time or to set the temperature in every room of the house. With a simple and intuitive interface, integrated into the environment and thanks to the capacitive touch screen interaction with "gestures" habitual with the diffusion of tablets and smartphones. Characteristics Hydrosilence technology for unparalleled acoustic comfort. Cross-flow tangential fan. Inverter motors with modulating technology and PID adaptive algorithm . Universal wall-mountability, even with the common predisposition boxes for gas splits (internal height >10cm). Wide range of accessories, such as the 2 and 3-way kits that can be installed on the machine Numerous control options , from the standard remote control to Modbus connectivity and Integra Benessere Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : T FALKO HI-WALL 850 HW Code : THM08 Performance: Cooling Power: 4280 W Heating power: 5437 W Air Flow : 850 m 3 /h Water Flow : 12.5 ~ 15.5 l/min Sound Pressure Level : 40 ~ 47 dB(A) Characteristics: Power supply (V,Hz, Ø) : 220~240/50/1 Electric Consumption : 52 W Maximum Current : 0.29A Maximum pressure : 1.6MPa Installation Data: Pipe diameter : 12.70 mm RC (1/2") Dimensions and weight: Internal Unit Dimensions (LxHxP): 970x300x198 mm Empty weight: 16 Kg IdealClima hydronic terminals FALKO Comfosplit Hydronic with Hydrosilence Technology. Silent and Advanced Solutions Falko HW is the hydronic terminal which contains, in compact dimensions and captivating aesthetics, ideal technologies for obtaining thermal and acoustic comfort in residential environments. In fact, Falko HW is distinguished by a high-performance heat exchange battery and a fan unit with a three-phase permanent magnet brushless motor controlled with current reconstructed according to a sine wave (the motor is thus called the "ECM" type): comfort and efficiency Elegant and Modern Design The Falko HW design, characterized by a white ABS front panel with elegant chromed details, is designed to integrate into any type of environment. The integrated air outlet is equipped with a motorized deflector. The front panel is complete with a display showing the operating status and the temperature. Supplied as standard, the infrared remote control allows control of the terminal and the setting of "night reduction". The tangential fan is low noise The effectiveness of hydronic rationality Falko HW represents the new generation of fan coils designed with the aim of offering performance and design at the top of its category. Falko HW also means innovation in terms of design, to guarantee absolutely excellent sound performance with the advantage of an exclusive design that goes well with both residential and commercial use. The design covering cabinet has a white color, with front panel, sides, upper grille and side doors made of stabilized ABS Hot and cold only when needed Falko HW guarantees, with its efficiency and quick response, the living comfort standards necessary for modern life, based on a discontinuous presence in homes. With a single appliance, both heating and cooling needs can be satisfied, especially in reversible heat pump systems Falko HW ensures higher quality of the air that is introduced into the environment, well filtered by the standard fine-mesh filter: in fact, it guarantees constant ventilation, which allows for greater cleaning of the air and considerable hygiene in the environments Easy to Install Falko HW can be installed easily, quickly and in any condition. In fact, it matches perfectly with the ordinary gas split predisposition boxes (H.int>10cm). The convenient sheet metal fixing plate also acts as a template for quick installation. The solid hinge that is obtained facilitates connection and allows easy maintenance (e.g. hydraulic system air vent) Semi-transparent display Elegant transparent display of the latest generation, does not interrupt the product lines Infrared receiver Managed with the standard remote control, with ease of installation and operation Elegant Finishes Refined details such as the soft lines and the thin chromed edge make it even more suitable for environments where nothing is left to chance High Power Even in the most thermally demanding situations, Falko is able to deliver all the power needed to guarantee comfort Characteristics Heating, cooling and dehumidifying environments. Emitting power with high efficiency at high as well as low flow temperatures (excellent for heat pump systems). Combine with both traditional boilers, as well as condensing boilers, solar systems and heat pumps Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : i-LIFE2 370 Cooling power: 2.82 kW Heating power: 3.43 kW Power supply (V/Hz/n°) : 230/50/1 Number of Pipes : 2 Treated volume : 499 - 697 m3 Sound pressure : 47 (dB) Sound power : 56 (dB) Dimensions and weight Dimensions : 1557x131x579 mm Weight : 29.0 Kg General characteristics ClimaVeneta Fan Coil I-LIFE-2-SLIM-080-DLMV, version with cabinet for vertical installation, with tangential fan and motor with Inverter technology, for residential applications. i-LIFE2 SLIM is the new Climaveneta fan coil with inverter technology for heating, cooling and dehumidification. The minimal design and reduced depth (only 13 cm) make it the perfect solution for installations in residential environments. The motor, with electronic speed switching, allows perfect adaptation to the internal load of the environment without temperature variations. Furthermore, the tangential fan unit allows continuous modulation of the air flow without step variations and without the annoying switching of the relays. Basically, this fan coil has been designed to maintain the set temperature with very low sound levels and, above all, with high energy efficiency. Characteristics: DC Inverter motor with continuous speed regulation in order to guarantee high performance with very low noise levels Elegant design and depth of only 13 cm for installation in residential environments Coil with a large frontal surface which allows the achievement of high air flows with minimum pressure drops Air filter with honeycomb structure in polypropylene (PP) regenerable by washing or blowing Tangential fan with asymmetrical blades to ensure continuous modulation of the air flow for high comfort and significant energy savings On-board control unit complete with touch keyboard with 8 "touch" keys, backlit LCD display with colored light symbols. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : T FALKO HI-WALL 1000 HW Code : THM10A Performance: Cooling Power: 5100 W Heating power: 6478 W Air Flow : 1020 m 3 /h Water Flow : 14.9 ~ 18.5 l/min Sound Pressure Level : 40 ~ 49 dB(A) Characteristics: Power supply (V,Hz, Ø) : 220~240/50/1 Electric Consumption : 65 W Maximum Current : 0.36A Maximum pressure : 1.6MPa Installation data: Pipe diameter : 12.70 mm RC (1/2") Dimensions and weight: Internal Unit Dimensions (LxHxP): 970x300x198 mm Empty weight: 17 Kg IdealClima hydronic terminals FALKO Comfosplit Hydronic with Hydrosilence Technology. Silent and Advanced Solutions Falko HW is the hydronic terminal which, in compact dimensions and captivating aesthetics, contains technologies that are ideal for obtaining thermal and acoustic comfort in residential environments. In fact, Falko HW is distinguished by a high-performance heat exchange battery and a fan unit with a three-phase permanent magnet brushless motor controlled with current reconstructed according to a sine wave (the motor is thus called the "ECM" type): comfort and efficiency Elegant and Modern Design The Falko HW design, characterized by a white ABS front panel with elegant chromed details, is designed to integrate into any type of environment. The integrated air outlet is equipped with a motorized deflector. The front panel is complete with a display showing the operating status and the temperature. Supplied as standard, the infrared remote control allows control of the terminal and the setting of "night reduction". The tangential fan is low noise The effectiveness of hydronic rationality Falko HW represents the new generation of fan coils designed with the aim of offering performance and design at the top of its category. Falko HW also means innovation in terms of design, to guarantee absolutely excellent sound performance with the advantage of an exclusive design that goes well with both residential and commercial use. The design covering cabinet has a white color, with front panel, sides, upper grille and side doors made of stabilized ABS Hot and cold only when needed Falko HW guarantees, with its efficiency and quick response, the living comfort standards necessary for modern life, based on a discontinuous presence in homes. With a single appliance, both heating and cooling needs can be satisfied, especially in reversible heat pump systems Falko HW ensures higher quality of the air that is introduced into the environment, well filtered by the standard fine-mesh filter: in fact, it guarantees constant ventilation, which allows for greater cleaning of the air and considerable hygiene in the environments Easy to Install Falko HW can be installed easily, quickly and in any condition. In fact, it matches perfectly with the ordinary gas split predisposition boxes (H.int>10cm). The convenient sheet metal fixing plate also acts as a template for quick installation. The solid hinge that is obtained facilitates connection and allows easy maintenance (e.g. hydraulic system air vent) Semi-transparent display Elegant transparent display of the latest generation, does not interrupt the product lines Infrared receiver Managed with the standard remote control, with ease of installation and operation Elegant Finishes Refined details such as the soft lines and the thin chromed edge make it even more suitable for environments where nothing is left to chance High Power Even in the most thermally demanding situations, Falko is able to deliver all the power needed to guarantee comfort Characteristics Heating, cooling and dehumidifying environments. Emitting power with high efficiency at high as well as low flow temperatures (excellent for heat pump systems). Combine with both traditional boilers, as well as condensing boilers, solar systems and heat pumps Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

AERMEC Fan Coil fan coil mod. FCZ-P 600 built-in vertical / horizontal installation - command excluded Heating power kW 8.10 Cold power kW 3.90 Dimensions HxWxD mm 216x1122x453 Recessed installation Power supply V/ph/Hz 230V~50Hz FCZ-P Taking advantage of the exceptional experience gained with fan coils, Aermec presents the new FCZ P series built-in fan coils. They can be installed in any type of 2/4 pipe system and in combination with any heat generator even at low temperatures and thanks to the availability of various versions and configurations, it is easy to choose the optimal solution for any need. Maximum silent operation Total comfort: reduced fluctuations in temperature and relative humidity Also suitable for ducted installations

Read more less

Riello Design Wall 11P Fan Coil fan coil for combination with TOP Optional wall control panel accessory 20186364 1.65 kW Total yield in cooling (a) kW 1.65 Water flow l/h 279 Output in heating with 45°C water inlet (b) kW 1.80 Water pressure drop (70°C ∆T 10) kPa 4.7 Battery water content 0.74 litres Maximum working pressure 10 bar EUROKONUS 3/4" inch hydraulic connections Maximum air flow (d) m3 /h 331 Air flow at medium speed (AUTO mode) m3/h 229 Supply voltage V/ph/Hz 230/1/50 Maximum electrical power absorbed W 229 Sound pressure at maximum air flow (d) dB(A) 42.4 Dimensions mm WxHxD 1102x335x128 Design WALL DESIGN WALL is the new range of Riello wall-mounted fan coils for residential and small commercial applications. Thanks to the DC-Brushless motor, DESIGN WALL fan coils are able to work with a high modulation of the air flow, from 0 up to 100%, to maintain a comfortable temperature inside the room and guarantee maximum silence during operation. DESIGN WALL fan coils are characterized by an extremely slim aesthetic, with a depth of only 128 mm, for perfect integration within the premises. The air distribution takes place via motorized flaps, obtaining a uniform diffusion throughout the room. Available in two versions: with remote control included and TOUCH display on the machine or for combination with the TOP wall-mounted control panel accessory (Design Wall 11÷23P). All the functions of the fan coil are guaranteed. The range is available in 3 cooling power sizes from 1070 W up to 2310 W and in heating from 1270 W up to 2600 W, in the two versions with supplied remote control or in combination with the TOP wall-mounted control panel. Ultra slim aesthetics Depth of 128 mm also with 2-3 way valve on board Motorized flaps for comfortable air distribution Controls with Touch Display Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GALLETTI ESTRO F6A FAN COIL FAN COIL 2,83 kW Model : ESTRO F6A Fan coils for exposed wall installation with cover cabinet with inclined air outlet. Dimensions: 984 x 556 x 228mm Product pluses: 3/6 speed motor Built-in ionizer Can be integrated with ERGO Eurovent certification Steel / ABS cabinet Can be installed in niche Reversible hydraulic connections Centrifugal fans in ABS (E) = EUROVENT certified performance, an independent body recognized at European level, which ensures total reliability and transparency of performance and sound level Cockerels Estro ESTRO is the widest range of Fan Coils on the market. In carrying out the project for the ESTRO fan coils, high quality materials were chosen which, together with the great care and attention given to the assembly of the main construction components, qualify ESTRO in the field of performance reliability and acoustic comfort. The cover cabinet is made up of a sheet steel panel, side panels and delivery grille in ABS. Inclined air outlet for wall niche installation. High efficiency heat exchange coil, in copper tube and aluminum fins. Double intake centrifugal fans, made of antistatic ABS with airfoil blades and staggered modules. Electric motor with 3 or 6 speeds, mounted on anti-vibration supports. Regenerable air filter that can be easily removed for maintenance operations. Control panels, available as an accessory. Estrus FA Visible wall installation with cover cabinet. The inclined air outlet on the front makes the ESTRO FA version particularly suitable for insertion in recesses up to 150 mm deep. ESTRO FA is available in 19 models. Centrifugal fan Supervision ergo Vertical installation 4-pipe system 2-pipe system Technical characteristics of the main components: Mobile Of coverage composed of a thick steel sheet panel (10/10 mm); side panels and delivery grille (adjustable by 180°) are made of ABS . The side doors allow access to the technical compartments. Inclined air outlet for wall niche installation. Structure in thick galvanized steel sheet (up to 15/10 mm), insulated with class 1 self-extinguishing thermal insulating panels. The FU – FB – FC – FF and FBC versions are equipped with a double tray for collecting the condensate. High efficiency heat exchange coil , in copper pipe and aluminum fins locked to the pipes by mechanical expansion, it is equipped with brass manifolds and vent valve. The battery, normally mounted with connections on the left, can be rotated by 180°. Motor electric with three or six speeds mounted on anti-vibration supports, with permanently inserted capacitor and thermal protection of the windings. Fans centrifuges double suction, statically and dynamically balanced and coupled directly to the electric motor, made of antistatic ABS with airfoil blades and staggered modules Filter air regenerable in honeycomb polypropylene, mounted on a galvanized sheet frame with a safety net, which can be easily removed for maintenance operations. The filter is locked to the cover cabinet by means of 1/4 turn screws (model 12 excluded). Panels control , available as an accessory, for controlling and regulating the temperature by means of a microprocessor system, which automatically adjusts the operation of the fan coil as the ambient conditions change. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GALLETTI ESTRO F9A FAN COIL FAN COIL 4,84 kW Model : ESTRO F9A Fan coils for exposed wall installation with cover cabinet with inclined air outlet. Dimensions: 1194 x 556 x 228mm Product pluses: 3/6 speed motor Built-in ionizer Can be integrated with ERGO Eurovent certification Steel / ABS cabinet Can be installed in niche Reversible hydraulic connections Centrifugal fans in ABS (E) = EUROVENT certified performance, an independent body recognized at European level, which ensures total reliability and transparency of performance and sound level Cockerels Estro ESTRO is the widest range of Fan Coils on the market. In carrying out the project for the ESTRO fan coils, high quality materials were chosen which, together with the great care and attention given to the assembly of the main construction components, qualify ESTRO in the field of performance reliability and acoustic comfort. The cover cabinet is made up of a sheet steel panel, side panels and delivery grille in ABS. Inclined air outlet for wall niche installation. High efficiency heat exchange coil, in copper tube and aluminum fins. Double intake centrifugal fans, made of antistatic ABS with airfoil blades and staggered modules. Electric motor with 3 or 6 speeds, mounted on anti-vibration supports. Regenerable air filter that can be easily removed for maintenance operations. Control panels, available as an accessory. Estrus FA Visible wall installation with cover unit. The inclined air outlet on the front makes the ESTRO FA version particularly suitable for insertion in recesses up to 150 mm deep. ESTRO FA is available in 19 models. Centrifugal fan Supervision ergo Vertical installation 4-pipe system 2-pipe system Technical characteristics of the main components: Mobile Of coverage composed of a thick steel sheet panel (10/10 mm); side panels and delivery grille (adjustable by 180°) are made of ABS . The side doors allow access to the technical compartments. Inclined air outlet for wall niche installation. Structure in thick galvanized steel sheet (up to 15/10 mm), insulated with class 1 self-extinguishing thermal insulating panels. The FU – FB – FC – FF and FBC versions are equipped with a double tray for collecting the condensate. High efficiency heat exchange coil , in copper pipe and aluminum fins locked to the pipes by mechanical expansion, it is equipped with brass manifolds and vent valve. The battery, normally mounted with connections on the left, can be rotated by 180°. Motor electric with three or six speeds mounted on anti-vibration supports, with permanently inserted capacitor and thermal protection of the windings. Fans centrifuges double suction, statically and dynamically balanced and coupled directly to the electric motor, made of antistatic ABS with airfoil blades and staggered modules Filter air regenerable in honeycomb polypropylene, mounted on a galvanized sheet frame with a safety net, which can be easily removed for maintenance operations. The filter is locked to the cover cabinet by means of 1/4 turn screws (model 12 excluded). Panels control , available as an accessory, for controlling and regulating the temperature by means of a microprocessor system, which automatically adjusts the operation of the fan coil as the ambient conditions vary. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Fan coil convector Fan Coil INNOVA AirLeaf DC Inverter SL600C Model: SL600C DC Inverter Energy efficiency: Total cooling capacity Total cooling capacity kW 2.89 Water flow rate L/h 304 Water flow rate (45/40 °C) Water flow rate (45/40 °C) L/h 535 Heating capacity with water 70/60 °C Heating capacity (water 70/60 °C) kW 5.47 Hydraulic characteristics Coil water content Water coil content L 1.13 Maximum operating pressure bar 10 Hydraulic connections Inch Eurokonus 3/4 Performance: Sound power at maximum airflow dB(A) 51 Sound pressure at maximum airflow dB(A) 42 Sound pressure at medium airflow dB(A) 34 Electrical data Supply voltage Power voltage V/ph/Hz 230/1/53 Maximum absorbed electrical power Maximum power consumption W 20 Maximum absorbed current Maximum current input A 0.18 Dimensions: Dimensions (WxHxD) mm 1135x579x129 (without feet) NB: For the version with connection on the right, the article Motor connection cable must be added for moving the hydraulic connections from left to right (it can only be fitted in the factory) it can only be fitted in the factory THE CONTROL PANEL IS NOT INCLUDED AND HAS TO BE PURCHASED SEPARATELY AirLeaf INNOVA FAN COILS: HOT IN WINTER, COOL IN SUMMER, IN THE MAXIMUM SILENCE, WITH AN EXCLUSIVE DESIGN! AirLeaf Inverter DC is the fan coil that contains the best solution for heating , cooling and dehumidification in a single device. It allows to reach very high energy efficiencies due to the possibility of being coupled with low temperature heat generators such as: heat pumps , condensing boilers and integrated systems with solar collectors. Thanks to a sophisticated temperature regulator, AirLeaf guarantees excellent thermal comfort in every season. It heats and cools extremely quickly and once the desired temperature is reached, it maintains it with great precision in complete silence. In heating, AirLeaf develops an effective natural convection effect (similar to that of a radiator) which considerably reduces the need to activate the ventilation. Its harmonious design and the extraordinarily reduced depth of only 13 centimeters make it integrable in any type of environment for any furnishing requirement. The depth of 129 mm is obtained thanks to an innovative design. The fan is tangential with asymmetrical blades and the exchanger has a large frontal surface, thus obtaining high air flows with low pressure drops and very quiet operation. Efficiency is very high with energy consumption of a few Watts. The fan speed is no longer "in steps" but continuously modulated with proportional and integrative logic: this reduces both noise and annoying air movements. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Cordivari VNT 2000 Fan Coil Fan Coil 1.6 kW white color with control included Model VNT 2000 Air flow [m3 /h] 50 160 min max Sound pressure [db(A)] 19.8 / 39 Power supply 230V / 50Hz Maximum absorbed power [watt] 14 Dimensions WxHxD mm 594x558x129 Cordivari VNT fan coils Materials: Galvanized and painted metal structure, complete with insulation and aluminum alloy grids Fixing kit: The kits include plugs and fixing screws, suitable for use on compact walls or perforated brick. For correct installation, always refer to the assembly instructions supplied. Packing: The fan coil is protected with a recyclable cardboard box. Use and maintenance instructions supplied. Functionality: DC Inverter motor and hot-cold operation Electrical specifications: Class 1 Touch Control Display: Heating mode Cooling mode Auto mode Demuidification mode Ventilation mode Solenoid valve 1 and 2 Timer Night mode Touchpad display lock Ventilation mode Air inlet temperature and set temperature Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less