THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : ecoTEC Intro VMW 18/24 AS/1-1 Item code : 0010026087 Power supply: methane Performance Heating power : 6.0 ~ 18.3 kW Nominal heat input in DHW : 6.0 ~ 24.0 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at 30% : 107.8% Domestic hot water production (ΔT = 30K): 11.5 l/min Domestic hot water temperature adjustment: 35°C ~ 60°C Modulation : 1:4 Expansion vessel pre-charge pressure: 0.75 bar Minimum water pressure: 0.3 bar Total electric power: 90 W Expansion vessel capacity: 8 litres Dimensions and weight Dimensions (HxWxD): 626x400x270 mm Weight : 25.6Kg Warranty extension to 7 years ecoTEC Intro VMW wall-mounted condensing boiler The most compact and lightest, now also for outdoor use The new ecoTEC intro VMW condensing boilers (for heating and domestic hot water production) are available in 24 and 28 kW power ratings, increasing the range of product choices within the consolidated range of Vaillant condensing boilers. In fact, this product gives new users the opportunity to approach the world of condensing boilers offered by Vaillant, without incurring excessive costs for replacing the old boiler. ecoTEC intro maintains the focus on energy saving by mounting a high-efficiency modulating pump that minimizes annual electricity consumption , with a consequent positive impact on bills. Also with regard to gas savings, Vaillant offers the new combustion technology , called fan push, where it is the fan which, thanks to the different levels of pressure exerted on the gas valve, guarantees the right ratio between combustion air and gas. The ecoTEC intro case is simple and essential, the dimensions appear to be extremely small which however do not affect or reduce the quality and efficiency of the product, guaranteed by Vaillant. The front panel introduces an innovative , extremely simple touch screen interface with 6 keys, black background display and 2 white digits with intermittent switching on. An additional e-bus connector has been added to the bottom of the boiler which allows connection to Vaillant temperature control units and thermostats. These wall mounted boilers are very simple to install thanks to their dimensions (62.6cm high, 40cm wide and 27cm deep) and low weight (about 26kg): these features make them ideal whenever replacement is required. All the components that are present in the product comply with the ErP energy efficiency regulations, a guideline also embraced by Vaillant, as a brand sensitive to environmental issues. This is all that the new ecoTEC intro can offer, in addition to a competitive price which does not affect performance. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoTEC wall mounted boiler intro Electricity consumption in standby less than 2W Innovative touch screen display Sanitary comfort even with low flow rates Low installation costs Small size Exchanger in stainless steel Pneumatic combustion system with complete pre-mixing Vertical hydraulic connections 1:4 modulation Instant DHW production 8 liter expansion tank Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Product name VAILLANT ecoTEC PURE CONDENSING VMW 246/7-2 COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Heating efficiency class A Sanitary efficiency class A XL load profile Nominal thermal power in sanitary kW 28.0 DHW nominal heat input kW 7.8 - 24.8 Performance stars (Dir. 92/42CEE) ★★★★ NOx class 5 Nominal flow rate in heating (ΔT=20K) l/h 1033 Expansion vessel capacity l 8 Maximum operating overpressure bar 3 Domestic hot water production (ΔT = 30K) l/min 13.5 Domestic hot water comfort stars (prEN 13203) ★★ Power supply V/Hz 230/50 Total electric power W 100 Dimensions H x W x L: 720-335-440; 30.8Kg Sound power dB(A): 49 Degree of protection IP X4 D Power supply: METHANE General characteristics Vaillant condensing boiler With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for equipment that uses energy, including energy efficiency. The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes to the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation also at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year. NEW EcoTEC PURE The easiest way to switch to Vaillant condenser. Vaillant DNA is synonymous with quality. Always. ecoTEC pure represents the solution that Vaillant offers to anyone who wants to switch to a Vaillant condensing boiler without worries. ecoTEC pure is really simple to install. It is equipped with vertical hydraulic connections that make replacement jobs simple, both for those who are abandoning a traditional boiler (atmo-turboBLOCK), and for those who choose Vaillant for the first time. All in full compliance with the characteristics that identify Vaillant products: the boiler is in fact in energy class A both in heating and in the production of hot water. Even the new ecoTEC pure design immediately recalls the quality and reliability that characterize the company's DNA; the lines are clean for this new indoor condensing boiler with standard measurements: 70cm high, 44 wide and 33 deep. ecoTEC pure heats the water and the rooms to give the right comfort in a convenient way. It is available with a single model in the power of 24kW. Comfort, savings, safety Instant hot water even for small requests High sanitary comfort Condensation with Vaillant DNA The most convenient solution The vertical hydraulic connections allow for carefree replacement Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE. SO THE TRANSFORMATION KIT IS REQUIRED. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE VAILLANT ecoTEC PRO CONDENSING VMW 286/5-3+ COMPLETE WITH FUME EXHAUST KIT -ErP Technical features For heating and domestic hot water production Forced draft sealed chamber Nominal thermal power 24.0 kW ErP energy class (Heating and DHW): Class A DHW nominal heat input 28.6 kW Nominal heat input in heating mode 24.5 kW Water content in the generator 2.2 l Expansion vessel capacity 10 l Domestic hot water production (ΔT = 30K) 13.4 lt Dimensions (hxpxl) mm 720 x 338 x 440 ; 36kg Version: LPG (WITH SPECIAL TRANSFORMATION KIT) General characteristics Vaillant condensing boiler With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for equipment that uses energy, including energy efficiency. The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes to the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation also at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year. EcoTEC PRO The wall mounted boiler that offers the right balance between performance and comfort. The ecoTEC pro VMW (heating and DHW production) are available in power ratings of 19 and 24 kW. ecoTEC pro was born as the natural evolution of Vaillant's consolidated technology and experience in condensing technology. ecoTEC pro has been designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. Its simplicity of regulation makes it the ideal boiler for all users. ecoTEC pro is equipped with an extremely simple interface with plain text and backlit display. The small dimensions of ecoTEC pro VMW 70cm high, 44cm wide and 35cm deep (identical to the previous version) allow installation in any environment. A new high-efficiency pump and new electronics allow ecoTEC pro to consume very little electricity, guaranteeing considerable savings throughout the year. Instant DHW production Intuitive user interface Simplicity of management ****Efficiency in heating Modulation 1:5 Modulating pump (Class A) Steel primary exchanger 10 l expansion vessel transfer kit from methane to propane or propane air code 0020160884 Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

VAILLANT ecoTEC PRO CONDENSING VMW 286/5-3+ COMPLETE WITH FUME EXHAUST KIT -ErP NOx 5 Technical features For heating and domestic hot water production Forced draft sealed chamber Nominal thermal power 24.0 kW ErP energy class (Heating and DHW): Class A DHW nominal heat input 28.6 kW Nominal heat input in heating mode 24.5 kW Water content in the generator 2.2 l Expansion vessel capacity 10 l Domestic hot water production (ΔT = 30K) 13.4 lt Dimensions (hxpxl) mm 720 x 338 x 440 ; 36kg Version: CNG General characteristics Vaillant condensing boiler EcoTEC PRO The wall mounted boiler that offers the right balance between performance and comfort. The ecoTEC pro VMW (heating and DHW production) are available in power ratings of 19 and 24 kW. ecoTEC pro was born as the natural evolution of Vaillant's consolidated technology and experience in condensing technology. ecoTEC pro has been designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. Its simplicity of regulation makes it the ideal boiler for all users. ecoTEC pro is equipped with an extremely simple interface with plain text and backlit display. The small dimensions of ecoTEC pro VMW 70cm high, 44cm wide and 35cm deep (identical to the previous version) allow installation in any environment. A new high-efficiency pump and new electronics allow ecoTEC pro to consume very little electricity, guaranteeing considerable savings throughout the year. Instant DHW production Intuitive user interface Simplicity of management ****Efficiency in heating Modulation 1:5 Modulating pump (Class A) Steel primary exchanger 10 l expansion vessel transfer kit from methane to propane or propane air code 0020160884 Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : EcoTEC Pure VMW 246/7-2 Product code : 0010019985 Power supply: LPG Performance Heating power : 7.5 ~ 24.0 kW Sanitary rated power : 7.0 ~ 28.0 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 5 Performance Stars : ★★★★ Domestic hot water production (ΔT = 30K) 13.5 l/min Domestic hot water temperature adjustment: 35°C ~ 60°C Modulation : 1:4 Expansion vessel capacity: 8 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x335 mm Weight : 30.8Kg Warranty extension to 7 years EcoTEC Pure VMW wall-mounted indoor condensing boiler The simplest that adapts to everyone's needs The new ecoTEC pure design immediately recalls the quality and reliability that characterize Vaillant's DNA. Indoor condensing boiler with Vaillant standard measurements 72 cm high, 44 cm wide and 33 cm deep. ecoTEC pure was designed with the intention of offering the ideal solution for replacing traditional boilers, including those of other brands , thanks to the vertical hydraulic connections, which guarantee great flexibility. A series of connection kits allow the rapid replacement of the atmo-turboBLOCK models. Ease of management thanks to a series of commands and a very simplified display , suitable for all types of customers. Vaillant has identified an innovative solution to prevent freezing of the condensate siphon, the element most sensitive to frost and thanks to the ecoLEVEL accessory it is possible to convey the condensate into the appropriate drains. The boiler features a new high-efficiency pump with high performance , a stainless steel exchanger and an 8-litre expansion vessel. Simply Vaillant Best value for money ecoTEC pure represents the ideal solution for anyone who wants to switch to Vaillant without worries because it is equipped with vertical connections that make installation quick and easy. Vaillant quality guarantees low consumption and good energy efficiency: the boiler is in class A both in heating and in DHW. The pure range consists of a single natural gas model with combined production. One kit allows you to switch to propane and propane air power. The boiler features a new thermo-hydraulic module equipped with a modulating pump to guarantee low electricity consumption while a new stainless steel exchanger and a wide modulation range up to 1:4 guarantee gas savings ecoTEC pure is the range dedicated to the replacement of boilers of other brands, possible thanks to the simplicity of the vertical connections and ease of use. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoTEC pure the easiest way to switch to Vaillant condensing Solution for heating and domestic hot water Complete range of accessories for replacing traditional boilers Reduced consumption thanks to the high efficiency pump Simplicity of management Small size Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE AND CAN BE ADJUSTED TO LPG. FOR INFORMATION, CONTACT THE AUTHORIZED ASSISTANCE CENTER IN YOUR AREA IN ADVANCE Technical Features Model : ecoTEC Pro VMW 236 Methane Model with Wi-Fi: 0020256400 Energy Class in Heating: A Energy Class in Sanitary: A Heating Power: 5.2 - 23.0 kW Power in Sanitary: 5,2 - 23,0 kW Sampling rate (ΔT = 30K): 11.0 l/min DHW temperature regulation: 35° - 65° C Possible diameter of exhaust gas outlets: 60/100 mm; 80/125; 80/80; 60/60 mm Gas Pipe Diameter: 12.70 mm (1/2") Hydraulic Pipe Diameter: G3/4" Dimensions (HxWxD): 720x440x338 mm Warranty Program 7 All Vaillant condensing boilers are included in the Warranty Program 7. By purchasing a Vaillant condensing boiler you can extend the warranty from 2 to 7 years and benefit from exclusive advantages: No fixed call fee Free labor Free original spare parts EcoTEC Pro VMW Boiler All models in the ecoTEC pro VMW range have an efficiency etas = 94%. For this reason, if combined with a class VI thermoregulation (such as vSmart), they achieve a system efficiency of 98% and therefore the ErP system energy class in heating A+ . The ecoTEC pro VMW boiler (heating and DHW production) is available in the 23kW and 28 kW power ratings. ecoTEC pro was born as the natural evolution of Vaillant's consolidated technology and experience in condensing technology. ecoTEC pro was designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. With the new high-efficiency pump and new electronics, ecoTEC pro consumes very little electricity, guaranteeing significant savings throughout the year. Its ease of regulation makes it the ideal boiler for all users, in addition to having an extremely simple interface with clear text and a backlit display to facilitate its use. ecoTEC pro is the ideal boiler for Vaillant-on-Vaillant replacements: installation is quick and easy, as is adjusting the operating parameters. The ecoTEC pro range includes: the combined version, the smart connectivity version in combination with vSMART, a version designed for installation in multiple collective flues and two versions for installations in single collective flues. ecoTEC pro CM is also the right choice for replacing boilers in multi-family complexes or for more complicated installations. Vaillant in fact offers a range of products suitable for flue systems as well as multiple options for accessories dedicated to the boiler: a flue gas pressure switch, combined with electronics, automatically adjusts the value to be set for the length of the vertical ducting so as to correctly evacuate the exhaust fumes. The ecoTEC pro CS models are equipped with a dedicated kit, included in the supply, consisting of a non-return valve, 87° bend and 80/125mm rigid section for connection to a single collective flue Small size The small size of ecoTEC pro VMW allows it to be installed in any environment: ✔ 70cm height ✔ 44cm width ✔ 35cm depth (identical to the previous version) Available with additional approval for outdoor installations up to -5°C Control your heating with your smartphone Thanks to its free App, vSMART represents a new approach to home efficiency, transforming smartphones or tablets into remote control systems and allowing you to control and regulate ecoTEC plus at any time, from any place, quickly and intuitively. Discover perfect comfort with the vSMART Wi-Fi modulating thermostat Vaillant vSMART is the advanced Wi-Fi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click from your smartphone or tablet thanks to a dedicated app already available for iOS and Android In fact, with the Wi-Fi modulating thermostat you can transform your smartphone or tablet into a remote control system and manage your heating system even remotely. Furthermore, by using the Wi-Fi network you can control and regulate the comfort of your home wherever you are in a quick and extremely intuitive way vSMART is designed to ensure comfort and extreme ease of use and can be installed on the wall by connecting it to the electrical network or placed wherever you prefer using common AAA batteries. The thermostat communicates with the boiler via the Vaillant eBus protocol . With an elegant and essential design it integrates perfectly into any environment allowing you to adjust your single system and possibly the load of a boiler for domestic hot water with a simple click. The benefits of vSMART are not limited to convenience. Using this product you can drastically reduce the " start/stop " cycles of the boiler, thus allowing you to save on gas and electricity and extend the life of your appliance. Characteristics Heating and domestic hot water solution Reduced installation costs Sanitary comfort even with low flow rates High efficiency pump Intuitive display and simplified adjustments Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : ecoTEC Intro VMW 18/24 AS/1-1 Article code : 0010026087 Power supply: LPG Performance Heating power : 6.0 ~ 18.3 kW Nominal heat input in DHW : 6.0 ~ 24.0 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at 30% : 107.8% Domestic hot water production (ΔT = 30K): 11.5 l/min Domestic hot water temperature adjustment: 35°C ~ 60°C Modulation : 1:4 Expansion vessel pre-charge pressure: 0.75 bar Minimum water pressure: 0.3 bar Total electric power: 90 W Expansion vessel capacity: 8 litres Dimensions and weight Dimensions (HxWxD): 626x400x270 mm Weight : 25.6Kg Warranty extension to 7 years ecoTEC Intro VMW wall-mounted condensing boiler The most compact and lightest, now also for outdoor use The new ecoTEC intro VMW condensing boilers (for heating and domestic hot water production) are available in 24 and 28 kW power ratings, increasing the range of product choices within the consolidated range of Vaillant condensing boilers. In fact, this product gives new users the opportunity to approach the world of condensing boilers offered by Vaillant, without incurring excessive costs for replacing the old boiler. ecoTEC intro maintains the focus on energy saving by mounting a high-efficiency modulating pump that minimizes annual electricity consumption , with a consequent positive impact on bills. Also with regard to gas savings, Vaillant offers the new combustion technology , called fan push, where it is the fan which, thanks to the different levels of pressure exerted on the gas valve, guarantees the right ratio between combustion air and gas. The ecoTEC intro case is simple and essential, the dimensions appear to be extremely small which however do not affect or reduce the quality and efficiency of the product, guaranteed by Vaillant. The front panel introduces an innovative , extremely simple touch screen interface with 6 keys, black background display and 2 white digits with intermittent switching on. An additional e-bus connector has been added to the bottom of the boiler which allows connection to Vaillant temperature control units and thermostats. These wall mounted boilers are very simple to install thanks to their dimensions (62.6cm high, 40cm wide and 27cm deep) and low weight (about 26kg): these features make them ideal whenever replacement is required. All the components that are present in the product comply with the ErP energy efficiency regulations, a guideline also embraced by Vaillant, as a brand sensitive to environmental issues. This is all that the new ecoTEC intro can offer, in addition to a competitive price which does not affect performance. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoTEC wall mounted boiler intro Electricity consumption in standby less than 2W Innovative touch screen display Sanitary comfort even with low flow rates Low installation costs Small size Exchanger in stainless steel Pneumatic combustion system with complete pre-mixing Vertical hydraulic connections 1:4 modulation Instant DHW production 8 liter expansion vessel Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less