ATTENTION ! Built-in unit is purchased separately. Technical features Model : ecoINWALL Plus Product code : 0010017154 Energy efficiency class in heating: A Sanitary energy efficiency class: A Performance Stars : ★★★★ Heating power : 5.2 kW ~ 25.1 kW DHW power : 5.2 kW ~ 25.6 kW Domestic hot water production (ΔT = 30K) 12.1 l/min DHW temperature adjustment : 35°C ~ 60°C Domestic hot water comfort stars : ★★★ Expansion vessel capacity: 8 litres NOx class : 5 Degree of protection : IPX5D Power supply: LPG Optional accessories Built-in box 0010030848 Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 845x515x234 mm Empty weight: 35.5 kg Warranty extension to 7 years Wall-mounted built-in condensing boiler Vaillant ecoINWALL plus VMW So discreet that it disappears into the wall ecoINWALL plus VMW is a 26 kW wall-mounted built-in boiler for domestic heating and the production of domestic hot water. With the combination of the convenient built-in feature, it allows for wall-mounted installation that is completely hidden in the wall in just 25 centimetres With this solution, Vaillant responds to the needs of residential construction: limited spaces inside homes and aesthetic constraints that prevent the installation of visible boilers on balconies and terraces. Being dedicated to the outside of the building, the boiler is equipped as standard with protection against frost down to -15°C. From the display of the specific remote control, the user is able to carry out the operations of control, regulation and signaling of any anomalies, remaining comfortably inside the house. Thanks to the pre-heating system and the NTC probes which monitor and prevent sudden changes in temperature, the boiler guarantees maximum comfort in domestic hot water and heating. The new modulating pump and the new stainless steel exchanger ensure great savings on electricity and gas consumption. Furthermore, combined with the multiMATIC 700 control unit, it allows to refine the thermoregulation and further reduce management costs. ecoINWALL is not only the smart answer for modern installations, but a concentration of performance, savings and technology that does not require any space inside the home. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoINWALL plus VMW The built-in solution, in the combined version Frost protection up to -15°C and IPX5D High DHW comfort thanks to settable pre-heating Exchanger in stainless steel Modulation 1:5 8 liter expansion tank Vertical hydraulic connections Simplicity in replacing standard balcony boilers thanks to a complete range of accessories Automatic system loading function Thermoregulation with standard remote control inside the house Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THE BOILER IS BORN WITH METHANE. THEREFORE, IT IS NECESSARY TO REQUEST THE TRANSFORMATION KIT. FOR INFORMATION, CONTACT THE AUTHORIZED ASSISTANCE CENTER IN YOUR AREA IN ADVANCE Technical Features Model : EoTEC Plus VMW 236/5-3+ Product code : 0010034554 Power supply: Methane Performance Heating power: 5.2~23.0kW Rated power in sanitary mode: 5.2 ~ 23.0 kW Energy efficiency class in heating: A Energy efficiency class in sanitary ware: A Health load profile: XL NOx class : 5 Performance Stars: ★★★★ Domestic hot water production (ΔT = 30K) 11.0 l/min Domestic hot water temperature regulation: 35°C ~ 65°C Modulation : 1:5 Expansion vessel capacity: 10 litres Installation data Flue gas connection diameter: 60/100 mm Possible diameter of exhaust gas outlets: 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic pipe diameter: 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x338 mm Weight: 33 Kg 7-year warranty extension Wall mounted condensing boiler ecoTEC pro VMW + Reliable and flexible for Vaillant replacements on Vaillant All models in the ecoTEC pro VMW range have an efficiency etas = 94%. For this reason, if combined with a class VI thermoregulation, such as vSmart, they achieve a system efficiency of 98% and therefore the ErP system energy class in heating A+ . The ecoTEC pro VMW boiler is available in the powers of 23 kW and 28 kW. ecoTEC pro was born as the natural evolution of Vaillant's consolidated technology and experience in condensing technology. ecoTEC pro was designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. With the new high-efficiency pump and new electronics, ecoTEC pro consumes very little electricity, guaranteeing significant savings throughout the year. Its ease of regulation makes it the ideal boiler for all users, in addition to having an extremely simple interface with clear text and a backlit display to facilitate its use. ecoTEC pro is the ideal wall-mounted combined boiler for Vaillant-on-Vaillant replacements thanks to its ease of installation and availability of accessories. Once installed, it will win you over with its extraordinary ease of regulation The small size of ecoTEC pro VMW allows it to be installed in any environment: 70cm height 44cm width 35cm depth Identical to the previous version Control your heating with your smartphone Thanks to its free App, vSMART represents a new approach to home efficiency, transforming smartphones or tablets into remote control systems and allowing you to control and regulate ecoTEC Pro at any time, from any place, quickly and intuitively. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoTEC Pro Comfort and simplicity within everyone's reach Heating and domestic hot water solution Reduced installation costs Sanitary comfort even with low flow rates High efficiency pump Intuitive display and simplified adjustments Frost resistance -5°C Steel primary exchanger Pneumatic Combustion System Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! The built-in unit is purchased separately. Technical Features Model : ecoINWALL Plus Product code : 0010017154 Energy efficiency class in heating: A Energy efficiency class in sanitary ware: A Performance Stars: ★★★★ Heating power: 5.2 kW ~ 25.1 kW Sanitary power: 5.2 kW ~ 25.6 kW Domestic hot water production (ΔT = 30K) 12.1 l/min ACS temperature regulation: 35°C ~ 60°C Hot water comfort stars: ★★★ Expansion vessel capacity: 8 litres NOx class : 5 Degree of protection: IPX5D Power supply: Methane Optional accessories Built-in box 0010030848 Installation data Flue gas connection diameter: 60/100 mm Possible diameter of exhaust gas outlets: 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic pipe diameter: 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 845x515x234 mm Empty weight: 35.5 kg Warranty extension to 7 years Vaillant ecoINWALL plus VMW built-in condensing wall-mounted boiler So discreet that it disappears into the wall ecoINWALL plus VMW is a 26 kW built-in wall-mounted boiler for domestic heating and domestic hot water production. With the combination of the convenient built-in, it allows for wall installation that disappears completely into the wall in just 25 centimetres. With this solution Vaillant responds to the needs of residential construction: limited space inside homes and aesthetic constraints that prevent the installation of exposed boilers on balconies and terraces. Since it is dedicated to the outside of the building, the boiler is equipped as standard with frost protection up to -15°C. From the display of the dedicated remote control, the user is able to carry out control, adjustment and reporting of any anomalies, remaining comfortably inside the home. Thanks to the pre-heating system and the NTC probes that monitor and prevent temperature changes, the boiler guarantees maximum comfort in domestic hot water and heating. The new modulating pump and the new stainless steel exchanger ensure great savings on electricity and gas consumption. Furthermore, combined with the multiMATIC 700 control unit, it allows you to refine the thermoregulation and further reduce management costs. ecoINWALL is not only the intelligent answer for modern installations, but a concentrate of performance, savings and technology that does not require any space inside homes. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoINWALL plus VMW The built-in solution, in the combined version Frost protection up to -15°C and IPX5D High sanitary comfort thanks to adjustable preheating Stainless steel exchanger Modulation 1:5 8 litre expansion vessel Vertical hydraulic connections Simplicity in replacing standard balcony boilers thanks to a complete range of accessories Automatic system loading function Thermoregulation with remote control as standard inside the home Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE AND CAN BE ADJUSTED TO LPG. FOR INFORMATION, CONTACT THE AUTHORIZED ASSISTANCE CENTER IN YOUR AREA IN ADVANCE Technical Features Model : ecoTEC Pro VMW 236 Methane Model with Wi-Fi: 0020256400 Energy Class in Heating: A Energy Class in Sanitary: A Heating Power: 5.2 - 23.0 kW Power in Sanitary: 5,2 - 23,0 kW Sampling rate (ΔT = 30K): 11.0 l/min DHW temperature regulation: 35° - 65° C Possible diameter of exhaust gas outlets: 60/100 mm; 80/125; 80/80; 60/60 mm Gas Pipe Diameter: 12.70 mm (1/2") Hydraulic Pipe Diameter: G3/4" Dimensions (HxWxD): 720x440x338 mm Warranty Program 7 All Vaillant condensing boilers are included in the Warranty Program 7. By purchasing a Vaillant condensing boiler you can extend the warranty from 2 to 7 years and benefit from exclusive advantages: No fixed call fee Free labor Free original spare parts EcoTEC Pro VMW Boiler All models in the ecoTEC pro VMW range have an efficiency etas = 94%. For this reason, if combined with a class VI thermoregulation (such as vSmart), they achieve a system efficiency of 98% and therefore the ErP system energy class in heating A+ . The ecoTEC pro VMW boiler (heating and DHW production) is available in the 23kW and 28 kW power ratings. ecoTEC pro was born as the natural evolution of Vaillant's consolidated technology and experience in condensing technology. ecoTEC pro was designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. With the new high-efficiency pump and new electronics, ecoTEC pro consumes very little electricity, guaranteeing significant savings throughout the year. Its ease of regulation makes it the ideal boiler for all users, in addition to having an extremely simple interface with clear text and a backlit display to facilitate its use. ecoTEC pro is the ideal boiler for Vaillant-on-Vaillant replacements: installation is quick and easy, as is adjusting the operating parameters. The ecoTEC pro range includes: the combined version, the smart connectivity version in combination with vSMART, a version designed for installation in multiple collective flues and two versions for installations in single collective flues. ecoTEC pro CM is also the right choice for replacing boilers in multi-family complexes or for more complicated installations. Vaillant in fact offers a range of products suitable for flue systems as well as multiple options for accessories dedicated to the boiler: a flue gas pressure switch, combined with electronics, automatically adjusts the value to be set for the length of the vertical ducting so as to correctly evacuate the exhaust fumes. The ecoTEC pro CS models are equipped with a dedicated kit, included in the supply, consisting of a non-return valve, 87° bend and 80/125mm rigid section for connection to a single collective flue Small size The small size of ecoTEC pro VMW allows it to be installed in any environment: ✔ 70cm height ✔ 44cm width ✔ 35cm depth (identical to the previous version) Available with additional approval for outdoor installations up to -5°C Control your heating with your smartphone Thanks to its free App, vSMART represents a new approach to home efficiency, transforming smartphones or tablets into remote control systems and allowing you to control and regulate ecoTEC plus at any time, from any place, quickly and intuitively. Discover perfect comfort with the vSMART Wi-Fi modulating thermostat Vaillant vSMART is the advanced Wi-Fi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click from your smartphone or tablet thanks to a dedicated app already available for iOS and Android In fact, with the Wi-Fi modulating thermostat you can transform your smartphone or tablet into a remote control system and manage your heating system even remotely. Furthermore, by using the Wi-Fi network you can control and regulate the comfort of your home wherever you are in a quick and extremely intuitive way vSMART is designed to ensure comfort and extreme ease of use and can be installed on the wall by connecting it to the electrical network or placed wherever you prefer using common AAA batteries. The thermostat communicates with the boiler via the Vaillant eBus protocol . With an elegant and essential design it integrates perfectly into any environment allowing you to adjust your single system and possibly the load of a boiler for domestic hot water with a simple click. The benefits of vSMART are not limited to convenience. Using this product you can drastically reduce the " start/stop " cycles of the boiler, thus allowing you to save on gas and electricity and extend the life of your appliance. Characteristics Heating and domestic hot water solution Reduced installation costs Sanitary comfort even with low flow rates High efficiency pump Intuitive display and simplified adjustments Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMI 26 CS/1-5 Article code : 0010025186 Power supply: methane or LPG Forced draft sealed chamber Performance Heating power : 3.0 ~ 25.0 kW DHW power : 3.0 ~ 26.0 kW Withdrawal flow rate (ΔT = 30K) : 16.5 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 97.7% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 20-litre stratified kettle Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x546 mm Weight : 43.3Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMI Unrivaled sanitary comfort with an integrated storage tank Always ecoTEC plus but with an extra hot water reserve The new ecoTEC plus VMI has been renewed to achieve a higher level of efficiency, always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart , they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The system consisting of a boiler with storage tank is simple to assemble : the first step is the installation of the actoSTOR CL wall-mounted storage tank equipped with the relative pipes supplied for domestic water, then the ecoTEC plus VMW wall-mounted boiler is hung on the storage tank . All the necessary material is available within the same packaging. The actoSTOR CL stratification storage tank guarantees the same performance as a 60-litre coil storage tank but with considerably smaller spaces . It is possible, via a parameter in the electronics, to exclude the functionality of the boiler by making the boiler work instantaneously, guaranteeing savings on gas consumption The most significant development of the product is the IoniDetect fuel gas detection system which, in combination with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology allows you to use the boiler with a mixture of gas containing up to 20% hydrogen The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, technician or user. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMI The perfect solution for heating and domestic hot water The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Boiler with integrated 20-litre storage tank A new additional 26 kW size is also available High modulation 1:9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 26 CS/1-5 CFI Article code : 0010022021 Power supply: methane or LPG Performance Heating power : 3.0 ~ 25.0 kW DHW power : 3.0 ~ 26.0 kW Withdrawal flow rate (ΔT = 30K) : 12.6 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 103.4% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 34.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart, they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Discover perfect comfort with the vSMART Wi-Fi modulating thermostat Vaillant vSMART is the advanced Wi-Fi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click from your smartphone or tablet thanks to a dedicated app already available for iOS and Android In fact, with the Wi-Fi modulating thermostat you can turn your smartphone or tablet into a remote control system and manage your heating system even remotely. Furthermore, using the Wi-Fi network you can quickly and extremely intuitively control and adjust the comfort of your home wherever you are vSMART is designed to ensure comfort and extreme simplicity of use and can be installed on the wall by connecting it to the mains or placed where you prefer using ordinary AAA batteries. The thermostat communicates with the boiler via the Vaillant eBus protocol . With an elegant and essential design, it integrates perfectly into any environment, allowing you to adjust your single system with a simple click and possibly the load of a domestic hot water tank. The benefits of vSMART are not limited to convenience. By using this product you will be able to drastically reduce the " start/stop " cycles of the boiler thus allowing you to save on gas and electricity and to extend the life of your appliance. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 35 CS/1-5 CFI Article code : 0010022025 Power supply: methane or LPG Performance Heating power : 4.0 ~ 34.1 kW DHW power : 4.0 ~ 34.1 kW Withdrawal flow rate (ΔT = 30K) : 16.5 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 105.2% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 39.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart, they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-hung condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Discover perfect comfort with the vSMART Wi-Fi modulating thermostat Vaillant vSMART is the advanced Wi-Fi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click from your smartphone or tablet thanks to a dedicated app already available for iOS and Android In fact, with the Wi-Fi modulating thermostat you can turn your smartphone or tablet into a remote control system and manage your heating system even remotely. Furthermore, using the Wi-Fi network you can quickly and extremely intuitively control and adjust the comfort of your home wherever you are vSMART is designed to ensure comfort and extreme simplicity of use and can be installed on the wall by connecting it to the mains or placed where you prefer using ordinary AAA batteries. The thermostat communicates with the boiler via the Vaillant eBus protocol . With an elegant and essential design, it integrates perfectly into any environment, allowing you to adjust your single system with a simple click and possibly the load of a domestic hot water boiler. The benefits of vSMART are not limited to convenience. By using this product you will be able to drastically reduce the " start/stop " cycles of the boiler thus allowing you to save on gas and electricity and to extend the life of your appliance. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : ecoTEC Intro VMW 24/28 AS/1-1 Article code : 0010026088 Power supply: LPG Performance Heating power : 6.9 ~ 23.9 kW Nominal heat input in DHW : 6.9 ~ 28.0 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at 30% : 108.2% Domestic hot water production (ΔT = 30K): 13.4 l/min Domestic hot water temperature adjustment: 35°C ~ 60°C Modulation : 1:4 Expansion vessel pre-charge pressure: 0.75 bar Minimum water pressure: 0.3 bar Total electric power: 90 W Expansion vessel capacity: 8 litres Dimensions and weight Dimensions (HxWxD): 626x400x270 mm Weight : 25.6Kg Warranty extension to 7 years ecoTEC Intro VMW wall-mounted condensing boiler The most compact and lightest, now also for outdoor use The new ecoTEC intro VMW condensing boilers (for heating and domestic hot water production) are available in 24 and 28 kW power ratings, increasing the range of product choices within the consolidated range of Vaillant condensing boilers. In fact, this product gives new users the opportunity to approach the world of condensing boilers offered by Vaillant, without incurring excessive costs for replacing the old boiler. ecoTEC intro maintains the focus on energy saving by mounting a high-efficiency modulating pump that minimizes annual electricity consumption , with a consequent positive impact on bills. Also with regard to gas savings, Vaillant offers the new combustion technology , called fan push, where it is the fan which, thanks to the different levels of pressure exerted on the gas valve, guarantees the right ratio between combustion air and gas. The ecoTEC intro case is simple and essential, the dimensions appear to be extremely small which however do not affect or reduce the quality and efficiency of the product, guaranteed by Vaillant. The front panel introduces an innovative , extremely simple touch screen interface with 6 keys, black background display and 2 white digits with intermittent switching on. An additional e-bus connector has been added to the bottom of the boiler which allows connection to Vaillant temperature control units and thermostats. These wall mounted boilers are very simple to install thanks to their dimensions (62.6cm high, 40cm wide and 27cm deep) and low weight (about 26kg): these features make them ideal whenever replacement is required. All the components that are present in the product comply with the ErP energy efficiency regulations, a guideline also embraced by Vaillant, as a brand sensitive to environmental issues. This is all that the new ecoTEC intro can offer, in addition to a competitive price which does not affect performance. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-hung condensing boilers. ecoTEC wall mounted boiler intro Electricity consumption in standby less than 2W Innovative touch screen display Sanitary comfort even with low flow rates Low installation costs Small size Exchanger in stainless steel Pneumatic combustion system with complete pre-mixing Vertical hydraulic connections 1:4 modulation Instant DHW production 8 liter expansion vessel Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 30 CS/1-5 CFI Article code : 0010022023 Power supply: methane or LPG Performance Heating power : 3.5 ~ 30.0 kW DHW power : 3.5 ~ 30.0 kW Withdrawal flow rate (ΔT = 30K) : 14.5 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 108.7% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gas outlets: 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 39.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart, they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-hung condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Discover perfect comfort with the vSMART Wi-Fi modulating thermostat Vaillant vSMART is the advanced Wi-Fi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click from your smartphone or tablet thanks to a dedicated app already available for iOS and Android In fact, with the Wi-Fi modulating thermostat you can turn your smartphone or tablet into a remote control system and manage your heating system even remotely. Furthermore, using the Wi-Fi network you can quickly and extremely intuitively control and adjust the comfort of your home wherever you are vSMART is designed to ensure comfort and extreme simplicity of use and can be installed on the wall by connecting it to the mains or placed where you prefer using ordinary AAA batteries. The thermostat communicates with the boiler via the Vaillant eBus protocol . With an elegant and essential design, it integrates perfectly into any environment, allowing you to adjust your single system with a simple click and possibly the load of a domestic hot water tank. The benefits of vSMART are not limited to convenience. By using this product you will be able to drastically reduce the " start/stop " cycles of the boiler thus allowing you to save on gas and electricity and to extend the life of your appliance. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : ecoTEC Intro VMW 18/24 AS/1-1 Article code : 0010026087 Power supply: LPG Performance Heating power : 6.0 ~ 18.3 kW Nominal heat input in DHW : 6.0 ~ 24.0 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at 30% : 107.8% Domestic hot water production (ΔT = 30K): 11.5 l/min Domestic hot water temperature adjustment: 35°C ~ 60°C Modulation : 1:4 Expansion vessel pre-charge pressure: 0.75 bar Minimum water pressure: 0.3 bar Total electric power: 90 W Expansion vessel capacity: 8 litres Dimensions and weight Dimensions (HxWxD): 626x400x270 mm Weight : 25.6Kg Warranty extension to 7 years ecoTEC Intro VMW wall-mounted condensing boiler The most compact and lightest, now also for outdoor use The new ecoTEC intro VMW condensing boilers (for heating and domestic hot water production) are available in 24 and 28 kW power ratings, increasing the range of product choices within the consolidated range of Vaillant condensing boilers. In fact, this product gives new users the opportunity to approach the world of condensing boilers offered by Vaillant, without incurring excessive costs for replacing the old boiler. ecoTEC intro maintains the focus on energy saving by mounting a high-efficiency modulating pump that minimizes annual electricity consumption , with a consequent positive impact on bills. Also with regard to gas savings, Vaillant offers the new combustion technology , called fan push, where it is the fan which, thanks to the different levels of pressure exerted on the gas valve, guarantees the right ratio between combustion air and gas. The ecoTEC intro case is simple and essential, the dimensions appear to be extremely small which however do not affect or reduce the quality and efficiency of the product, guaranteed by Vaillant. The front panel introduces an innovative , extremely simple touch screen interface with 6 keys, black background display and 2 white digits with intermittent switching on. An additional e-bus connector has been added to the bottom of the boiler which allows connection to Vaillant temperature control units and thermostats. These wall mounted boilers are very simple to install thanks to their dimensions (62.6cm high, 40cm wide and 27cm deep) and low weight (about 26kg): these features make them ideal whenever replacement is required. All the components that are present in the product comply with the ErP energy efficiency regulations, a guideline also embraced by Vaillant, as a brand sensitive to environmental issues. This is all that the new ecoTEC intro can offer, in addition to a competitive price which does not affect performance. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoTEC wall mounted boiler intro Electricity consumption in standby less than 2W Innovative touch screen display Sanitary comfort even with low flow rates Low installation costs Small size Exchanger in stainless steel Pneumatic combustion system with complete pre-mixing Vertical hydraulic connections 1:4 modulation Instant DHW production 8 liter expansion vessel Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE AND IS ADJUSTABLE TO LPG. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : ecoTEC Pro VMW 286 Methane model with Wi-Fi: 0020256401 Energy Class in Heating: A Energy Class in Sanitary: A Heating power: 6.2 - 24.0 kW Sanitary power: 6.2 - 28.0 kW Withdrawal flow rate (ΔT = 30K) : 13.4 l/min DHW temperature adjustment: 35° - 65° C Possible diameter of burnt gas outlets: 60/100 mm; 80/125; 80/80; 60/60mm Gas Pipe Diameter: 12.70 mm (1/2") Hydraulic Pipe Diameter : G3/4" Dimensions (HxWxD): 720x440x338 mm Warranty program 7 All Vaillant condensing boilers are included in the Guarantee Program 7. By purchasing a Vaillant condensing boiler you can extend the guarantee from 2 to 7 years and benefit from exclusive advantages: No fixed call fee Free labor Free original spare parts VMW EcoTEC Pro boiler All models in the VMW ecoTEC pro range feature etas = 94% efficiency. For this reason, if combined with a class VI thermoregulation (such as vSmart), they reach a system efficiency of 98% and therefore the ErP system energy class in heating A+ . The ecoTEC pro VMW boiler (heating and DHW production) is available in 23kW and 28 kW power ratings. ecoTEC pro was born as the natural evolution of Vaillant's consolidated technology and experience in condensing technology. ecoTEC pro has been designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. With the new high-efficiency pump and new electronics, ecoTEC pro consumes very little electricity, guaranteeing considerable savings throughout the year. Its simplicity of adjustment makes it the ideal boiler for all users, as well as having an extremely simple interface with plain text and backlit display for ease of use ecoTEC pro is the ideal boiler for Vaillant on Vaillant replacements: installation is simple and quick, as is adjustment of the operating parameters. The ecoTEC pro range includes: the combined version, the smart connectivity version in combination with vSMART, a version designed for installation in multiple collective flues and two versions for installations in single collective flues. ecoTEC pro CM is also the right choice for boiler replacement in multi-family houses or for more complicated installations. Vaillant in fact provides a range of products suitable for the flue as well as multiple options as regards the accessories dedicated to the boiler: a flue pressure switch, combined with the electronics, self-adjusts the value to be set for the length of the vertical ducting so as to correctly evacuate the exhaust fumes. The ecoTEC pro CS models are equipped with a dedicated kit, included in the supply, consisting of a smoke non-return valve, 87° bend and 80/125mm rigid section for connection to a single collective flue Small size The small size of ecoTEC pro VMW allows it to be installed in any environment: ✔ 70cm height ✔ 44cm wide ✔ 35cm depth (identical to the previous version) Available with additional approval for outdoor installations down to -5°C Control the heating with your smartphone Thanks to its free App, vSMART represents a new approach to home efficiency, transforming smartphones or tablets into remote control systems and allowing ecoTEC plus to be controlled and adjusted at any time, from anywhere, quickly and intuitively. Discover perfect comfort with the vSMART Wi-Fi modulating thermostat Vaillant vSMART is the advanced Wi-Fi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click from your smartphone or tablet thanks to a dedicated app already available for iOS and Android In fact, with the Wi-Fi modulating thermostat you can turn your smartphone or tablet into a remote control system and manage your heating system even remotely. Furthermore, using the Wi-Fi network you can quickly and extremely intuitively control and adjust the comfort of your home wherever you are vSMART is designed to ensure comfort and extreme simplicity of use and can be installed on the wall by connecting it to the mains or placed where you prefer using ordinary AAA batteries. The thermostat communicates with the boiler via the Vaillant eBus protocol . With an elegant and essential design, it integrates perfectly into any environment, allowing you to adjust your single system with a simple click and possibly the load of a domestic hot water tank. The benefits of vSMART are not limited to convenience. By using this product you will be able to drastically reduce the " start/stop " cycles of the boiler thus allowing you to save on gas and electricity and to extend the life of your appliance. Characteristics Solution for heating and domestic hot water Reduced installation costs Sanitary comfort even with low flow rates High efficiency pump Intuitive display and simplified adjustments Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMI 30 CS/1-5 Item code : 0010025187 Power supply: methane or LPG Forced draft sealed chamber Performance Heating power : 3.5 ~ 30.0 kW DHW power : 3.5 ~ 30.0 kW Withdrawal flow rate (ΔT = 30K) : 18.0 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 97.8% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 20-litre stratified kettle Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gas outlets: 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x546 mm Weight : 52.3Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMI Unrivaled sanitary comfort with an integrated storage tank Always ecoTEC plus but with an extra hot water reserve The new ecoTEC plus VMI has been renewed to achieve a higher level of efficiency, always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart , they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The system consisting of a boiler with storage tank is simple to assemble : the first step is the installation of the actoSTOR CL wall-mounted storage tank equipped with the relative pipes supplied for domestic water, then the ecoTEC plus VMW wall-mounted boiler is hung on the storage tank . All the necessary material is available within the same packaging. The actoSTOR CL stratification storage tank guarantees the same performance as a 60-litre coil storage tank but with considerably smaller spaces . It is possible, via a parameter in the electronics, to exclude the functionality of the boiler by making the boiler work instantaneously, guaranteeing savings on gas consumption The most significant development of the product is the IoniDetect fuel gas detection system which, in combination with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology allows you to use the boiler with a mixture of gas containing up to 20% hydrogen The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, technician or user. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMI The perfect solution for heating and domestic hot water The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Boiler with integrated 20-litre storage tank A new additional 26 kW size is also available High modulation 1:9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less