Technical features Model : atmoTEC Plus VMW 240/5-5 Product code : 0010016273 Power supply: methane Performance Nominal thermal power in sanitary mode: 24.0 DHW nominal heat input kW 26.7 Energy efficiency class in heating: C Sanitary energy efficiency class: B Sanitary load profile : XL NOx class : 3 Performance stars : ★★ Domestic hot water production (ΔT = 30K) 11.5 l/min Domestic hot water comfort stars : ★★★ Expansion vessel capacity: 10 litres Fumes discharge temperature : 84° ~ 117°C Sound power : 49.5 dB(A) Dimensions and weight Dimensions (HxWxD): 800x338x440 mm Weight : 40.0 Kg Open flue boiler Vaillant atmoTEC Plus Standard wall mounted boiler for heating and domestic hot water Three star comfort hot water DHW pre-heating function Can be installed outdoors, protected up to -10C 10l expansion vessel High efficiency modulating pump. Energy efficiency class up to B depending on the model. For more information, see the technical data sheet The plus range was designed by Vaillant to meet all comfort needs for the production of hot water and for heating. The new atmoTEC plus series with open chamber models with natural draft features the domestic hot water pre-heating function; this function satisfies the customer's needs by reducing production times and immediately provides comfort. With a renewed design and their reduced dimensions, 80 x 44 x 34 cm, they can be placed in any room and easily housed in wall units or cover cabinets. Vaillant does not stop at the design but continues in the development and research of the best performance for the plus series obtaining exceptional results in terms of silence and ease of installation. Vaillant plus series boilers are at the top of performance in terms of efficiency, temperature constancy and low maintenance costs, thanks to the high quality of the components. A novelty in response to the ErP regulation is the introduction of a high efficiency pump (class A). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features ErP energy class: Class A Nominal heat output: 21.3 kW DHW direct withdrawal range ΔT = 25°C: 2.5 - 11 l/min Forced draft sealed chamber Ignition: electronic Compact dimensions (HxDxL): 600x183x385 mm Power supply: METHANE General characteristics turboMAG plus Extremely compact dimensions Wide modulation range Perfect dispensing temperature stability Design and intuitive touch screen Energy efficiency class up to A depending on the model. Domestic hot water Instantaneous forced draft water heaters, with electronic ignition with wide modulation range and extremely compact dimensions: among the smallest on the market The turboMAG plus water heaters guarantee plenty of hot water immediately, always at a constant temperature and maximum operational safety. Precisely safety is the added value of this range of water heaters. The Vaillant research and development team, which has been focused on ensuring leadership in the sector for over 140 years, has developed turboMAG plus with the target of safety: in fact, 26 control to ensure maximum user reliability. The new turboMAG plus are water heaters equipped with a three-stage combustion system which broaden the modulation range ensuring perfect temperature stability during hot water delivery. A new exchanger raises the performance of the water heater which, in the 11 – 14 – 16 liters per minute versions, offers a flexible choice for every user. turboMAG plus allows 360° installation flexibility: inside apartments and also outside, resisting temperatures down to -15°C (thanks to the antifreeze accessory) and rain (IPX5D approval). A solar kit as an accessory also allows you to pre-heat the incoming water, further reducing gas consumption. turboMAG plus (hot water production) is the new version of forced draught water heaters with DHW flow rates of: 11, 14 and 16 litres/minute running on Natural Gas and LPG. Quality Continuous development since 1874: Vaillant has been accredited for its superior quality Careful selection of components that meet the highest requirements and guarantee perfect functionality Modern Design: The well-designed casing with high-quality appearance that fits perfectly into your home Total safety: 26 safety functions guarantee the functioning of the appliance Water heater interface with touch screen (IMD): Display with maximum water protection IPX5D protection : Tested with water jets up to a maximum of 12.5 l/min from all directions Flexible and efficient Exchanger with high efficiency: Water heating with minimum gas consumption and lower bill consumption Burner with high modulation : Precise regulation of the thermal power in relation to the DHW request Reduced noise thanks to fan modulation : between 2,400 and 4,800 rpm Various DHW production profiles (bath or shower): - Bath filling mode: monitoring of the filling volume - Normal: temperature setting 38-60 °C Simplified replacement: Same flue position and wall bracket, Reduced installation times High comfort 11, 14 & 16 liters of DHW production High modulation 1:4 Maximum temperature stability in DHW supply : Avoid unwanted temperature variations 3 level combustion : High modulation range 25-100% How to be ready for the new EU legislation Ecodesign Directive (ErP) 2015 What will happen from 26 September 2015? From this date it will no longer be possible to produce traditional forced draft boilers. Instead, it will be possible to continue producing condensing boilers and traditional open chamber boilers equipped with high-efficiency pumps and compliant with the new ErP requirements such as emission, noise and efficiency levels. In particular, the installation of traditional open chamber boilers will only be possible to replace old boilers installed in multi-family buildings which discharge the fumes into branched collective flues (CCR). Products placed on the market before 09/26/2015 that do not comply with the requirements of the new directive, such as traditional forced draft boilers and boilers not equipped with a high efficiency pump, can still be purchased, sold and installed. ErP and ELD: what do they mean and how are they different? ErP : The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive is aimed at two categories of products relevant to installers and resellers in the sector: - Category 1 includes space heating appliances; in particular: electrical, gas and diesel appliances such as boilers, heat pumps and cogenerators. - Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel such as water heaters, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres. ELD: in addition to the ErP directive, the EU has also introduced mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and the production of domestic hot water are labeled with an indication of their energy efficiency class. By combining the products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label. When and how will the new rules apply? On 26 September 2015 the new rules will come into effect. Until then, neither manufacturers, retailers or installers have to comply with the new Ecodesign or labeling provisions. Once the new rules come into effect, manufacturers will only be able to manufacture products that comply with the new Ecodesign requirements, and will be required to supply an energy label with the products What do the new rules mean for the end customer? Unlike household appliances, energy labels on heating and domestic hot water products and systems can only offer a first orientation and will not necessarily provide the best solution for a certain type of installation, nor will they give indications on the assumed cost of energy when obtains a high energy classification. For example, it is not said that a heat pump which presumably will have a higher efficiency class than a condensing boiler can then actually be used in a given type of building. This is why the advice of a competent technician is still necessary to understand the label and select the best product or system that best meets the needs of your building. Product Guarantee   All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION Offer valid while stocks last Technical features Model: Indoor unit catalog code : VAI6-065 WNI Outdoor unit catalog code : VAI6-065 WNO Combination code: GO 6-065 WN Typology: heat pump Power: 24000 Btu Energy efficiency: SEER : 5.10 SCOP : 3.80 Cooling Energy Efficiency Class : : A Heating Energy Efficiency Class: A Annual Energy Consumption in Cooling : 439 kWh/a Annual Energy Consumption in Heating: 2137 kWh/a Performance: Cooling Capacity: 6.5 kW Heating Capacity : Cooling Absorption : 0.25~1.36 kW Heating Absorption : 0.2~1.4 Treated Air Internal Unit : Sound Pressure Level Indoor Unit : Sound Pressure Level Outdoor Unit : Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R410A Compressor type Inverter DC Installation data Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 15.88 mm (5/8") Maximum piping length: 25 m Maximum height difference Indoor Unit / Outdoor Unit: 10 m Dimensions and weight Internal Unit Dimensions (HxLxP): 315x1007x219 mm Indoor Unit Weight: 14 Kg External Unit Dimensions (WxHxD): 790x920x370 mm Weight of Outdoor Unit: 60 Kg climaVAIR GO 6 Inverter Mono, Dual, TrialSplit and QuadriSplit DC Inverter Heat Pump It is the line of air conditioners that already meets the energy standards required for 2014, classified with class up to A++. The climaVAIR VAI 6 are equipped with the most advanced technology in the sector: DC Inverter PAM + PWM which allows to offer the greatest power with the highest efficiency. Thanks to the new shaped fan of the outdoor unit, air extraction is significantly improved by optimizing efficiency with lower noise emission. These products come with the following standard features: "X-Fan" for dehumidification of the internal battery, "Sleep" for progressive self-regulation of the night-time temperature, "Repeat" for memorizing programs. The climaVAIR VAI 6 are white and equipped with a backlit display ClimaVair Vai 6 by Vaillant is one of the first air conditioners that comply with the new ErP Directive 2009/125/EC which came into force on 1 January 2013 and which establishes the minimum requirements related to energy efficiency. Thanks to the cutting-edge technologies used in the design and construction phases of this range of air conditioners, they have been classified with the A ++, qualifying them among the best available on the market today. The new air conditioners belonging to the Vaillant ClimaVair Vai 6 line are available in both monosplit and multisplit versions. In the latter case, a single outdoor unit can be combined with up to 4 indoor units to ensure maximum efficiency in the home. What distinguishes them from traditional Inverter air conditioners is the union of two different technologies: the DC Inverter Pam which ensures maximum performance when switched on and when the maximum power load is reached, and the Pwm, designed to stabilize the ideal temperature as soon as it is reached. All this allows you to have an extremely efficient air conditioner at your disposal in every phase of its operation. The new air conditioners belonging to the Vaillant ClimaVair Vai 6 series adapt well to all modern furnishing needs. The internal unit, in fact, is white and on the front there is a practical backlit display useful for interacting more efficiently with the user. Characteristics: Energy class up to A++ SCOP higher or in line with 3.8, the minimum value required by the ErP regulation for 2014 PAM+PWM electronic control for maximum efficiency and consumption savings "X-Fan" function: to have the internal unit battery always dry, protecting it from the formation of mould "Repeat" function: to program the air conditioner only once and allow it to repeat the set program daily Functions: One of the most interesting is the X-Fan which dehumidifies the indoor unit allowing the air conditioner battery to always remain dry so as to eliminate the mold problem. Furthermore, thanks to the Repeat function , the air conditioner is able to automatically repeat the daily programs. Finally, the Sleep function allows you to gradually adjust the temperature until you reach the desired one during the night so as to avoid sudden changes in temperature and cold air waves. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Model: Combination code: GO 8-050 WN Indoor unit code: GO 8-050 WNI Outdoor unit code: GO 8-050 WNO Typology: heat pump Power: 18000 Btu Energy efficiency: SEER: 6.1 SCOP: 4.0 Energy Efficiency Class (Cooling) : A++ Energy Efficiency Class (Heating) : A+ Performance: Cooling power kW 5.13 Heating power kW 5.28 Airflow (Turbo/H/M/L) m3 /h 850/720/610/520 Indoor unit sound pressure (Turbo/H/M/L) dB(A) 49/44/39/34 External unit sound pressure dB (A) 56 Power supply (V/Hz/Φ) : 230/50/1 Characteristics: Refrigerant gas : R-32 Compressor type Inverter DC Outside temp. cooling (min-max) °C -15 | 48 External heating temp. (min-max) °C -15 | 24 Dimensions and weight: Indoor Unit HxLxP (mm) : 289x845x209 ; 13.5kg Outdoor Unit HxLxP (mm) : 596x899x378 ; 39kg GO 8 Plus Vaillant climaVAIR VAI plus are the new generation of air conditioners designed to give you comfort that lasts from morning to night. ● Seasonal efficiency value in cooling up to A++ ● R-32 refrigerant gas ● Sleep mode to manage the nocturnal climate by modulating the temperature by 1-2ºC in the first hours, reducing noise ● "I Feel" function with temperature sensor located on the remote control ● Vertical adjustment of the air flow ● Intelligent self-defrost: protects the exchanger from frost damage ● Easily removable filters and front panel to ensure easy cleaning and maintenance Compact dimensions, elegant and refined lines During the day they reach the desired temperature in the shortest time thanks to the TURBO function and at night, they adjust automatically while you are sleeping. The display integrated in the outdoor unit and a remote control always at hand to easily set your perfect climate. Thanks to the Sleep function, the air conditioner modulates operation by increasing the set temperature in cooling, or lowering it in heating, by 1ºC within one hour and by 2ºC after 2 hours, thus giving you a more comfortable sleep. ClimaVAIR plus also has the I Feel function which allows you to know the temperature actually perceived where the remote control is located and the Quiet function for noise-free operation. Thanks to the use of the new R-32 gas, climaVAIR plus is also already in line with the objectives established by the new legislation on fluorinated gases. climaVAIR plus VAI 8 is available in the following versions: - MonoSplit 2.6 kW, 3.5 kW, 5.1 kW, 6.5 kW. - MultiSplit DUAL 4.1 kW, 5.2 kW. - MultiSplit TRIAL of 7.1 kW. - MultiSplit QUADRI of 8.0 kW. - freeMULTI: possibility of freely combining up to 4 indoor units. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: Combination code: GO 8-025 WN Indoor unit code: GO 8-025 WNI Outdoor unit code: GO 8-025 WNO Typology: heat pump Power: 9000 Btu Energy efficiency: SEER: 6.1 SCOP: 4.0 Energy Efficiency Class (Cooling) : A++ Energy Efficiency Class (Heating) : A+ Performance: Cooling power kW 2.6 Heating power kW 2.8 Airflow (Turbo/H/M/L) m3 /h 560/490/430/330 Indoor unit sound pressure (Turbo/H/M/L) dB(A) 39/36/32/28 External unit sound pressure dB (A) 52 Power supply (V/Hz/Φ) : 230/50/1 Characteristics: Refrigerant gas : R-32 Compressor type Inverter DC Outside temp. cooling (min-max) °C -15 | 48 External heating temp. (min-max) °C -15 | 24 Dimensions and weight: Indoor Unit HxLxP (mm) : 275x790x200 ; 9kg Outdoor Unit HxLxP (mm) : 540x776x320 ; 29.5kg GO 8 Plus Vaillant climaVAIR VAI plus are the new generation of air conditioners designed to give you comfort that lasts from morning to night. ? Seasonal efficiency value in cooling up to A++ ? R-32 refrigerant gas ? Sleep mode to manage the nocturnal climate by modulating the temperature by 1-2ºC in the first hours, reducing noise ? "I Feel" function with temperature sensor located on the remote control ? Vertical adjustment of the air flow ? Intelligent self-defrost: protects the exchanger from frost damage ? Easily removable filters and front panel to ensure easy cleaning and maintenance Compact dimensions, elegant and refined lines During the day they reach the desired temperature in the shortest time thanks to the TURBO function and at night, they adjust automatically while you are sleeping. The display integrated in the outdoor unit and a remote control always at hand to easily set your perfect climate. Thanks to the Sleep function, the air conditioner modulates operation by increasing the set temperature in cooling, or lowering it in heating, by 1ºC within one hour and by 2ºC after 2 hours, thus giving you a more comfortable sleep. ClimaVAIR plus also has the I Feel function which allows you to know the temperature actually perceived where the remote control is located and the Quiet function for noise-free operation. Thanks to the use of the new R-32 gas, climaVAIR plus is also already in line with the objectives established by the new legislation on fluorinated gases. climaVAIR plus VAI 8 is available in the following versions: - MonoSplit 2.6 kW, 3.5 kW, 5.1 kW, 6.5 kW. - MultiSplit DUAL 4.1 kW, 5.2 kW. - MultiSplit TRIAL of 7.1 kW. - MultiSplit QUADRI of 8.0 kW. - freeMULTI: possibility of freely combining up to 4 indoor units. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION Offer valid while stocks last Technical features Model: Combination code: GO 6-025 WN Typology: heat pump Power: 9000 Btu Energy efficiency: SEER (W/W) : 5.60 COP (W/W) : 3.80 Energy Efficiency Class (Cooling) : A+ Energy Efficiency Class (Heating) : A Annual consumption (cooling/heating) kW/h 168/1.032 Performance: Cooling power kW 2.70 Min. - Max. power absorbed in cooling kW 0.25 - 1.36 Heating power kW 2.80 Min. - Max. power absorbed in heating kW 0.2 - 1.4 Internal unit air flow m3 /h 300/400/500/600 Indoor unit sound pressure dB (A) 28/34/39/43 External unit sound pressure dB (A) 53 Power supply (V/Hz/Φ) : 230/50/1 Characteristics: Refrigerant gas : R410A Refrigerant charge R410A gr 700 EEV expansion system Compressor type Inverter DC Installation: Liquid/gas pipe diameter Inch 1/4'' - 3/8'' Maximum pipe length m 15 height difference between int./ext. and vice versa m 10 Preload m 5 Additional charge per meter 20 g Dimensions and weight: Indoor Unit HxLxP (mm) : 275 x 845 x 180 ; 9kg Outdoor Unit HxLxP (mm) : 540 x 711 x 257 ; 28kg climaVAIR GO 6 Inverter Mono, Dual, TrialSplit and QuadriSplit DC Inverter Heat Pump It is the line of air conditioners that already meets the energy standards required for 2014, classified with class up to A++. The climaVAIR VAI 6 are equipped with the most advanced technology in the sector: DC Inverter PAM + PWM which allows to offer the greatest power with the highest efficiency. Thanks to the new shaped fan of the outdoor unit, air extraction is significantly improved by optimizing efficiency with lower noise emission. These products come with the following standard features: "X-Fan" for dehumidification of the internal battery, "Sleep" for progressive self-regulation of the night-time temperature, "Repeat" for memorizing programs. The climaVAIR VAI 6 are white and equipped with a backlit display Vaillant ClimaVair Vai 6 is one of the first air conditioners to comply with the new ErP Directive 2009/125/EC which came into force on 1 January 2013 and which establishes the minimum requirements related to energy efficiency. Thanks to the cutting-edge technologies used in the design and construction phases of this range of air conditioners, they have been classified with the A ++, qualifying them among the best available on the market today. The new air conditioners belonging to the Vaillant ClimaVair Vai 6 line are available in both monosplit and multisplit versions. In the latter case, a single outdoor unit can be combined with up to 4 indoor units to ensure maximum efficiency in the home. What distinguishes them from traditional Inverter air conditioners is the union of two different technologies: the DC Inverter Pam which ensures maximum performance when switched on and when the maximum power load is reached, and the Pwm, designed to stabilize the ideal temperature as soon as it is reached. All this allows you to have an extremely efficient air conditioner at your disposal in every phase of its operation. The new air conditioners belonging to the Vaillant ClimaVair Vai 6 series adapt well to all modern furnishing needs. The internal unit, in fact, is white and on the front there is a practical backlit display useful for interacting more efficiently with the user. Characteristics: Energy class up to A++ SCOP higher or in line with 3.8, the minimum value required by the ErP regulation for 2014 PAM+PWM electronic control for maximum efficiency and consumption savings "X-Fan" function: to have the internal unit battery always dry, protecting it from the formation of mould "Repeat" function: to program the air conditioner only once and allow it to repeat the set program daily Functions: One of the most interesting is the X-Fan which dehumidifies the indoor unit allowing the air conditioner battery to always remain dry so as to eliminate the mold problem. Furthermore, thanks to the Repeat function , the air conditioner is able to automatically repeat the daily programs. Finally, the Sleep function allows you to gradually adjust the temperature until the desired one is reached during the night so as to avoid sudden changes in temperature and cold air waves. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

VAILLANT GAS WATER HEATER for outdoor outsideMAG IT 14-5/0-5 LPG Technical features ErP energy class: Class A Sanitary load profile: L Reduced heat output - nominal kW 6.7 - 27.1 Permissible operating pressure range 0.2 - 10 bar Domestic hot water regulation temperature °C 38-60 Minimum hot water flow l/min 2.5 Domestic hot water production (ΔT = 25K) l/min 14.0 Domestic hot water production (ΔT = 35K) l/min 10.0 Power supply V/Hz 230/50 Total electric power W 123 Electric power without antifreeze device W 49 Dimensions HxDxL mm 609-180-453; 20.6 Kgs Sound power dBA 67 IP degree of protection IP X5D OutsideMAG The outdoor water heater that you control from the inside: simple to install and no encumbrance inside the house. The outsideMAG range of water heaters was designed and built to be installed outside the home and, thanks to the standard antifreeze protection, to withstand temperatures down to -25°C. The new version of outsideMAG water heaters has undergone significant improvements in domestic hot water production performance. The new forced draft outdoor versions with DHW flow rates of: 11, 14 and 16 litres/minute with Natural Gas and LPG, guarantee perfect temperature stability in dispensing. Vaillant has designed this new range to operate outside the home by increasing protection up to -25°C, as standard. They are very simple to install and do not require connections to the flue since they have a front outlet already integrated in the front panel (Type A approval). The new outsideMAG water heater stands out for its modern design that can be inserted in any external environment. The exclusive front air intake always ensures the right supply of oxygen for the correct functioning of the appliance, also giving it an unmistakable aesthetic touch. The materials used are particularly thick and designed to last over time even in contact with the elements. Touch interface for very simple comfort management. A special function allows to reduce the risk of overflowing from the tank during the DHW outlet through a loud acoustic signal. outsideMAGs are very simple to install. If there is no flue it is possible to install them anyway since they have a facade exhaust already integrated in the front panel (type A approval). For installation checks, always contact a qualified installer. They can be positioned on the balcony in a suitable position that complies with the regulations in force and the minimum distances to also facilitate the performance of any maintenance operation on the appliance. The new outsideMAGs are also characterized by a modern and sober design conceived to fit harmoniously into any type of external environment, from the balcony, to the terrace, to the veranda, to the garden. The outdoor water heater The Vaillant outsideMAG range of outdoor water heaters is available with volumes of 11, 14 and 16 liters per minute (in natural gas and LPG versions) to meet any domestic hot water need in a residential setting. All operations on the water heater are managed from inside the home. Thanks to the multitouch control panel, supplied as standard with the outsideMAG, you just need to touch the display functions with a touch of your finger to increase the water temperature whenever you want. But not only. You can also set the amount of water needed to fill the bathtub, thus preventing it from overflowing (bathTUBE function). Through the display it will always be possible to keep the water temperature and, in general, the functioning of the water heater under control. The compact dimensions of these outdoor water heaters allow installation even in the smallest niches. Never before so much comfort in so little space. High hot water production (up to 16 l/min) Equipped with acoustic signaling system to prevent water from escaping from the bathtub Reliability of every single component tested by Vaillant LabTest Frost protection down to -25°C Equipped with multitouch display to control the appliance from inside the home Where possible, it does not require a fume exhaust Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Sanitary efficiency class: A; Sanitary load profile: XL; Performance: Domestic hot water production (ΔT = 25K): 16.0 l/min; Domestic hot water production (ΔT = 35K): 11.4 l/min; Minimum hot water flow rate: 2.5 l/min; Thermal power (min/max): 7.7 - 31.0 kW; Power supply: 230/50V/Hz; Total electric power: 123W; Electric power without antifreeze device: 51 W; Inlet gas pressure: 20/37 mbar; Methane fumes discharge temperature (min.max): 100/200 °C; Maximum operating overpressure: 10 bar; Admissible operating pressure range (min./max): 0.2/10 bar; DHW temperature (min.max): 38-60 °C; Sanitary fittings: G 1/2" inch; Gas connection: G 1/2" inch; Fume exhaust connection: 60/100 mm; Sound Power: 68 dBA; Minimum operating temperature: -25°C; IP degree of protection IP X5D; Power supply: LPG or Propane gas (G31); Dimensions (HxWxL): 609x180x453 mm; Weight: 21.0 Kg; General characteristics Vaillant OutSide Mag water heater designed to always guarantee the same temperature of the water being dispensed. A particular feature of this water heater is its easy installation for outdoors, not even requiring connections to the flue, thanks to a facade drain already integrated in the front panel, it also guarantees very high resistance to atmospheric agents and the coldest temperatures (up to -25°C). Studied in detail, also through a modern and innovative design built with high efficiency materials, which not only fit into any environment, but through the front air intake always ensures the correct oxygen supply to ensure that the device work properly. All managed by a high technology that through a display or Touch interface, simple and intuitive to use, allows the rapid management of your comfort, and has a special function that through a loud acoustic signal, warns you in case there is an overflow from the tub during ACS output. Advantages: New version with improved performance; Extremely compact dimensions; Wide modulation range; Perfect dispensing temperature stability; Design and intuitive touch screen;

Read more less

.

Read more less

Product name GAS WATER HEATER VAILLANT ATMOMAG MINI 11-0/1 XI METHANE. Open Room WITH NATURAL DRAFT Technical specifications ErP energy class: Class A Nominal heat output: 19.2 kW DHW direct withdrawal range T = 25C: 2.5 - 11 l/min Chamber Open to natural draught Ignition: electronic Compact dimensions (HxWxL): 580/255/310 mm Power supply: METHANE General characteristics AtmoMAG MINI Instantaneous water heaters with electronic battery ignition. AtmoMAG XI are natural draft water heaters with electronic ignition powered by batteries. Saving safety without electric energy aids. The Direct Start system allows for faster ignitions. Ionization flame detection ensures operational safety. The adoption of the OPTI MOD system for flame regulation allows you to adapt the water temperature to the changing seasons with a quick gesture. In the mini version, features and functions remain unchanged and the small dimensions become the motif of choice in some living situations. atmoMAG XI (hot water production) the atmospheric version with DHW flow rate of: 14 litres/minute Natural gas LPG atmoMAG XI mini (hot water production) the atmospheric version with DHW flow rate of: 11 litres/minute Natural gas LPG Compact size Manual range selector Automatic flame modulation LCD display Domestic hot water Power selectable on 10 levels Ionization flame control New hydraulic unit Exchanger with Supral protection ErP and ELD: what they mean and how they differ ErP: The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes the minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive addresses two categories of relevant products for installers and retailers in the sector: Category 1 includes space heaters; in particular: electrical, gas and diesel appliances such as boilers, heat pumps and cogenerators. Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel such as water heaters, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres. ELD : in addition to the ErP directive, the EU has also introduced a mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and domestic hot water production are labeled with an indication of their energy efficiency class. By combining products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label. Product warranty For sale on our site they are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Overview VAILLANT ecoTEC PLUS CONDENSING BOILER VMW 306/5-5 + vSMART WiFi COMPLETE WITH FUME KIT - NEW ErP 2015 METHANE Cod. 0020222965 Technical specifications For heating and domestic hot waterÿ Forced draft sealed chamber Nominal heat input in sanitarywarekW 30 ErP energy class (Heating and DHW): class A Stars of yield (according to Dir. 92/42CEE) - **** Domestic hot water production (T = 30K) 14.3 lt Domestic hot water comfort stars (prEN 13203) - *** Expansion tank capacity 10 l Massimcontenutd?Ó?water in plantl 180 Dimensions (hxpxl) mm 720 x 338 x 440 Total electric power/pump (max speed) W 80/35 NOx class - 5 Adjustable in wi-fi from smartphone ThermostatvSMART as standard Version:ÿMETHANEÿ Features list Vaillant condensing boilerÿ With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. Tuttquestentril 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for energy-using equipment, including energy efficiency. The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes in the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation even at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year. ecoTEC PLUS ecoTEC plus the excellence of wall-mounted condensing boilers minimum consumption, maximum efficiency and versatility TheÿecoTEC plus series, wall-mounted condensing boiler of the latest generation, conceived to guarantee maximum energy savings and maximum comfort and designed to satisfyÿthe requirements of European regulationsÿconcerning energy efficiency which will enter into force inÿSeptember 2015. In addition, all the new products and systems for heating and water production hot water heaters must be labeled with an indication of their energy efficiency class. TheÿecoTEC plusÿlabeling signals theÿclass A. ecoTEC plusÿreaches this result easily because, in addition to the typical elements of Vaillant boilers, it has new completely innovative components: the combustion management system (ELGA), which, skilfully mixing air and gas, results in a reduction in gas consumption, new electronics and the very high efficiency to ensure considerable savings in electricity. For example, the electricity consumption of the boiler in stand-by is less than 2Watt (less than half of a working radio). ecoTEC plusÿguarantees maximum comfort: the boiler supplies immediately available hot water without sudden changes in temperature. Thanks to its small dimensions (70 cm high, 44 cm wide and 35 cm deep)ÿecoTEC plusÿ can be easily installed on any wall. Today it is possible to install it outdoors where the climate is mild even in winter. ecoTEC plusÿhas, in fact, also an anti-gel device which allows it to resist up to temperatures that reach -5°C. The newÿsimple and intuitive design, thanks to the display with clear text and backlighting, makes the boiler functional, allowing the user easy setting and simple control. ecoTEC plus compatible with all Vaillant components and accessories already on the market. Features:ÿ Boiler ready for 2015 regulations ErP: class A Preheat DHWÿ *** DHW comfortÿ Antigel-5øC as standard **** Efficiency in heating Modulation 1:8ÿ Modulating pump (Class A) Primary heat exchanger Vasexpansion 10 lÿ ELGA combustion system transfer kit from methane propan supplied WiFi programming from smartphone tablet wherever you are with vSMART and App vSMART VaillantÿvSMARTÿ the advanced WiFi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click on your smartphone tablet. The benefits of vSMART are not limited to convenience. Using andvSMART you drastically reduce the start/stop cycles of the boiler thus allowing you to save on gas and electricity and to extend the life of your appliance. vSMARTÿtransforms your smartphone tablet into a remote control system for your heating. Wherever you are and whatever you are doing, you will be able to control and adjust the comfort of your home in extremely intuitive mod-rapid using your WiFi network. Download the free ÿvSMARTÿapp from the tuStore. To download the App, simply enter the tuStore, search for vSMART and start the download. The Vaillant vSMART App is available for iOS and Android systems. vSMARTÿ Designed to ensure comfort and extreme ease of use. You can install it on the wall by connecting it to the electricity supply and place it where you prefer using common AA + batteries. Elegant and essential, it integrates perfectly into any environment. One device to save energy for others. With vSMART you can - Control heating and domestic hot water via App.ÿ - Have 30 pre-configured and customizable standard profiles available.ÿ - Monitor energy efficiency at all times.ÿ - Control the heating systems of several homes (e.g. two flats, two houses).ÿ - Check the historical data of temperature, mode and hours of operation.ÿ - Regulate the temperature based on climate data collected from the internet.ÿ - Quickly set the function or Away from Home? or Antifreeze? for greater savings.ÿ - Take advantage of the self-learning function that recognizes your programming over time to make your life even easier. The new EU legislation Starting from 26 September 2015 it is no longer possible to produce traditional forced draft boilers. Instead, it will be possible to continue producing condensing boilers and traditional open chamber boilers equipped with high efficiency pumps and compliant with the new ErP requirements such as emission levels, noise levels and efficiency. In particular, the installation of traditional open chamber boilers will only be possible in replacement of old boilers installed in multi-family buildings which discharge fumes into branched collective flues (CCR). Products placed on the market before 26/09/2015 that do not comply with the requirements of the new directive, such as traditional forced draft boilers and boilers not equipped with a high efficiency pump, can still be purchased, sold and installed. ErP and ELD: what they mean and how they differ ErP: The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive addresses two relevant product categories for installers and retailers in the sector: -ÿCategory 1ÿIncludes space heating appliances: electric, gas, oil, combined boilers, heat pumps and cogenerators up to 400 kW. -ÿCategory 2ÿIncludes appliances for the production of domestic hot water: electric, gas, diesel, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres. ELD:ÿIn addition to the ErP directive, the EU has also introduced mandatory energy labeling for the same types of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and domestic hot water production are labeled with an indication of their energy efficiency class. By combining products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label. 7 year guarantee The 7-year guarantee on new boilers is another excellent reason to offer Vaillant to your customers. In addition, know that by replacing a Vaillant boiler over 15 years old with a new generation one, the warranty extension will be provided free of charge by the Official Vaillant Technical Assistance Center against a maintenance contract. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER VAILLANT ATMOMAG MINI 11-0/1 XI LPG. Open Room WITH NATURAL DRAFT Technical specifications ErP energy class: Class A Nominal heat output: 19.2 kW DHW direct withdrawal range T = 25C: 2.5 - 11 l/min Chamber Open to natural draught Ignition: electronic Compact dimensions (HxWxL): 580/255/310 mm Power supply: LPG Features list atmoMAG MINI Instantaneous water heaters with electronic battery ignition. atmoMAG XI are natural draft water heaters with electronic ignition powered by batteries. Saving safety without electric energy aids. The Direct Start system allows for faster ignitions. The ionization flame detection ensures operational reliability. The adoption of the OPTI MOD system for flame regulation allows you to adapt the water temperature to the changing seasons with a quick gesture. In the mini version, the features and functions remain unchanged and the small dimensions become the motif of choice in some living situations. atmoMAG XI (hot water production) the atmospheric version with DHW flow rate of: 14 litres/minute Methane LPG atmoMAG XI mini (hot water production) the atmospheric version with DHW flow rate of: 11 litres/minute Methane LPG Characteristics: Compact size Manual range selector Automatic flame modulation LCD display Domestic hot water Power selectable on 10 levels Ionization flame control New hydraulic groups Exchanger with Supral protection ErP and ELD: what they mean and how they differ ErP: The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive addresses two relevant product categories for installers and retailers in the sector: - Category 1 includes space heating appliances; in particular: electrical, gas and diesel appliances such as boilers, heat pumps and cogenerators. - Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel such as water heaters, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres. ELD: In addition to the ErP directive, the EU has also introduced a mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and domestic hot water production are labeled with an indication of their energy efficiency class. By combining products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less