GAS BOILER UNICAL KON M C35 CONDENSING + FUME KIT - ErP KONm the latest generation of domestic condensing boilers by Unical, available in the version: instant combo heating only combinable with DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion. The details of konm... Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. “Quick release” condensate drain manifold Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as to stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to ensure high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER UNICAL KON M C24 CONDENSING LOW NOX COMPLETE WITH LPG FUME KIT Model: KONm 24C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power kW 23.6 Seasonal heating energy efficiency ambient ηs 92% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C): 12.7kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) η4: 87% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C): 4.2kW Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30 °C) η1: 96.7% Annual electricity consumption QHE GJ: 40 Heating energy efficiency. of water ηWH: 86% Daily fuel consumption Qfuel : 22.0 kWh Sound power level indoors Lwa dB(A) 51 Annual electricity consumption AEC: 400kWh Domestic hot water specific flow rate (Dt 30 °C): 11.2 l/min DHW production in cont. Dt 25 K (mixed): 13.2 l/min Expansion tank capacity: 8 lt Heating circuit pressure (min-max): 0.5-3.0 bar DHW circuit pressure (min-max): 0.5-6.0 bar IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345mm; 36.5kg KONm the latest generation of domestic condensing boilers by Unical, available in the version: instant combo heating only combinable with DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion The details of konm... Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as to stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to ensure high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility. Exchanger cleaning 1 minute and 46 seconds! KONm is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Intuitive controls The on-board electronic panel will feel immediately familiar. Last but not least: all wiring and intervention operations are facilitated by the vertical tilting system. The multifunction LCD display, with timed backlighting, allows: Reading of the temperatures in heating and DHW Display of blockage due to lack of fl ame Operating/stand-by status Diagnostics with signaling of 11 anomalies Knob: stand-by, mode selector and heating adjustment 30 - 85°C DHW adjustment knob 38 - 60°C Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.  

Read more less

UNICAL X 32 C condensing boiler Low NOx 6 Complete with methane flue exhaust kit in stainless steel - ErP Technical data according to dir. ErP C24 Minimum/nominal useful power in condensing kW 33.6 - 5.4 Seasonal heating energy efficiency of environment ?s % 93 Seasonal EFFICIENCY CLASS for heating A Useful thermal power in high temperature regime. (Tr 60°C / tm 80°C) P4 kW 31.2 Efficiency at nominal thermal power in high temperature regime (Tr 60°C / Tm 80°C) ?4 % 87.7 Useful power at 30% of rated thermal power in low temperature regime (Tr 30°C) P1 kW 10.4 Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30°C) ?1 % 97.8 Declared load profile XL Sanitary seasonal EFFICIENCY CLASS A Production DHW cont. Dt 25 K (mixed) l/min 18.2 Expansion vessel capacity l 10 Max condensate production kg/h 5.2 Heating circuit pressure (min/max) bar 3.0 / 6.0 IP degree of protection X5D NO class x 6 Dimensions (HxWxD) mm 700x420x345 Net weight kg 41 x X like INOX, like the exchanger which is the engine of this wall-mounted condensing boiler. X is available in the instantaneous combined version (13.2 l/min), it runs on both methane and LPG (conversion kit supplied). Characteristics: Premix Low NOx burner (Class 6) IPX5D (also for outdoors) Compact dimensions and compatible with other Unical models (ideal for replacements) Template and unified connections (Unical KONm / KONe ) Minimum thermal power regulation in heating function Electronic antifreeze for operation down to -15 Management of 2 zones with differentiated priorities (high and low temperature) Electronics with HWS "Hot Water Speed" function to eliminate the delay in DHW production and automatic "air vent" function Layout conceived with large spaces for easy maintenance Wide choice of accessories including: - both modulating and on/off control thermostats - external probe for managing both the boiler and one or two high/low temperature zones STAINLESS STEEL EXCHANGER MONOSPIRAL WITH OVAL SECTION WITHOUT WELDING GREATER COMBUSTION VOLUME LESS EMISSIONS / HIGHER PERFORMANCE OPTIMIZED PRESSURE DROP REDUCTION OF DEPOSITS LESS NOISE LONGER DURATION OVER TIME FRONT ACCESS FOR EASY MAINTENANCE Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Interacting with airCRISTAL even remotely: from today it is possible with your smartphone, a Wi-Fi connection and a simple optional key connected to the USB port of the air conditioner control board . With a simple and intuitive App, it is possible to set the operating modes of airCRISTAL, program the switching on and off also using a daily and/or weekly timer, check the operating consumption and the good functioning status of the air conditioner. In this way airCRISTAL will always ensure maximum comfort in the environment in which it is installed, making it ready to give a caress of well-being. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical Features Model: Indoor unit code: PS10 30HI External unit code: PS10 30HE Refrigerant: R-32 Technology: Inverter Energy Efficiency: Cooling efficiency SEER: 6.10 SCOP Coefficient of Performance: 3.80 Energy Efficiency Class (Cooling): A++ Energy Efficiency Class (Heating): A+ Annual energy consumption in cooling/heating: 440/2689 KWh/A Performance: Cooling capacity: 8.80 kW Heating capacity: 7.30 kW Air flow: 2160 m3/h Sound pressure indoor unit (db(A)): 51 External Unit Sound Pressure max (db(A)): 58.5 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Pipes Liquid / Gas Line: inch 3/8"/5/8" Dimensions and weight: Internal Unit (WxDxH): 1650x675x235 mm; 39 Kg External Unit (WxDxH): 946x810x410 mm; 56.9 kg General Features Floor/Ceiling Design in the spotlight Particular care has been taken in the design of these machines with rounded and modern lines that have been designed for installation in elegant environments, either on the floor or on the ceiling. They are suitable for medium/large sized environments, residential or commercial. The internal unit is equipped with large fins that allow the orientation of the main throw and a motorized oscillating deflector that allows a second positioning of the air flow via the remote control. The electronic command and control board, which is equipped with an Intronics microprocessor, is integrated with an important additional function called “ Watchdog ” which, in the event of a malfunction of the microprocessor due to voltage fluctuations, automatically restores its regular operation, thus avoiding dangerous current overloads to the microprocessor. Depending on the space available, this unit can be installed on the floor or on the ceiling. Series Features: Exchange batteries with large ventilation surface Rotary compressor (Scroll type for 36H-48H-60H models) Automatic defrosting system Self-diagnosis Autorestart Emergency power button R32 gas refrigerant Automatic condensation control Functions managed by remote control Cooling Dehumidification Heating Ventilation only Sleep Air swing Programmable On/Off Timer Automatic operation Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

General characteristics Model: Internal Unit Code: CS10 36HI Outdoor Unit Code: CS10 36HE Energy efficiency: SEER: 6.10 SCOP: 4.00 Cooling energy class: A++ Heating energy class: A+ Annual cooling/heating energy consumption: 564/3675 kWh/a Performance: Nominal cooling output power: 10.55 kW Nominal heating output power: 11.14 kW Nominal cooling power input: 3.75 kW Nominal heating power input: 2.99 kW INTERNAL SOUND PRESSURE (max - med - min) (*) dBA) 51-47-41 Sound Pressure Level Outdoor Unit: 58.5 dB(A) Electrical data: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant gas : R-32 Pipe connections: 5/8" / 3/8” Max height difference: 30 m Operating limits: - COOL. min~max °C - / -15 / +50 °C (out) - HEAT. min~max °C - / -15 / +24°C (out) Dimensions and weight: Indoor Unit LxPxH (mm): 840x840x245; 27.5 kgs Outdoor Unit LxPxH (mm): 946x810x410 ; 81.5 kgs General characteristics Unical cassettes Elegantly effective Unical Air CASSETTE air conditioners are available in 5 models, all with inverter heat pump. CS10 18H CS10 24H CS10 30H CS10 36H CS10 48H These machines, intended for recessed or false ceiling installation, are ideal for medium/large environments, such as bars, restaurants, large shops, meeting rooms, etc. The internal unit is enclosed in a completely insulated casing with a centralized fan which provides for the launch of the air through four vents located on the external sides and equipped with a special motorized deflector which distributes the air evenly and uniformly throughout the room. Installations in environments that often need to filter the air are favoured, for example: restaurants, meeting rooms and smoking areas. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Code Set : FLWY 12H Product code Indoor unit : FLWY 12HI Product code Outdoor Unit : FLWY 12HE Power : 12000 Btu Optional Wi-Fi USB KEY Energy efficiency SEER : 6.1 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual Energy Consumption in Cooling : 195 kWh/a Annual Energy Consumption in Heating: 840 kWh/a Performance Cooling Capacity: 3.40 kW Heating Capacity: 2.40 kW Cooling absorption: 1.05 kW Heating absorption: 0.92 kW Treated Air Internal Unit: 560 m 3 /h Sound Pressure Level Indoor Unit : 22~41 dB(A) Sound Pressure Level Outdoor Unit : 50 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range - Cooling: -15° ~ 53°C - Heating: -15° ~ 30° C Installation data Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Maximum piping length: 25 m Maximum height difference Indoor Unit / Outdoor Unit: 10 m Dimensions and weight Internal Unit Dimensions (WxHxD): 790x275x192 mm Indoor Unit Weight: 8.5 Kg External Unit Dimensions (WxHxD): 777x498x290 mm Weight of Outdoor Unit: 24 Kg Unical Flowy The air conditioner with integrated ionizer FLOWY is Unical's new heat pump air conditioner, a real generator of well-being with a harmonious and exclusive design and which contains the most innovative technological patents at the service of comfort and energy saving • Integrated bipolar ionizer which sanitizes the air in the room by eliminating up to 99% suspended particles such as dust, mites, bacteria and pollen • Vertical deflectors with patented “diffuser” holes for pleasant and effective air distribution • "Full Inverter" technology for cost and consumption reduction • "Easy clean" system for quick and simple maintenance and cleaning of the air conditioner • Turbo system , for those who demand ultra-fast comfort Remote control Thanks to the electronics and the optional USB Key connected to the home Wi-Fi, with the simple and intuitive App, the user can, from a smartphone or tablet, set the operating modes at any time, program switching on and off, daily timer /weekly, check the operating consumption and the condition of the climate control system Sanitized air Why ionize the air The combined action of the FLOWY ionizer with the electrostatic filters reduces up to 99% the presence of: • Bacteria • Allergens • Microparticles in suspension cause of many allergies and respiratory problems The air we breathe in indoor and closed environments is, ironically, much more polluted than the outside air. Today, more than ever, the importance of disinfecting hands, cleaning surfaces and constant ventilation of the environment is recognized. But it may not be enough. Creating true comfort in the environment means giving the right temperature and, above all, the pleasure of breathing clean and healthy air: this is the mission of FLOWY, thanks to its technology with advanced functions Electronic ionizer The ionizer is a powerful electronic device integrated in the FLOWY internal unit (unlike other air conditioners which simply use ion filters), which, thanks to emitting needles, manages to electrically charge the gas molecules present in the air. The negative ions generated attract and thus bind to the positively charged microparticles suspended in the air (dust, pollen and bacteria, odours, mold spores, epithelium, etc.), neutralizing them and purifying the ambient air. It can be activated from the remote control (HEALT function) and generates in a few minutes up to 3000 billion negative ions per m 3 of air , sanitizing and enriching the ambient air with oxygen ions, as well as giving a pleasant sensation of fresh air and purified The ionizer with electrostatic filters reduces up to 99% the presence of: • Bacteria • Allergens : Pollens, Molds, Spores, Animal dandruff, Epithelia, Dust mites • Chemical Vapors : Volatile chemical compounds, Smog, Cigarette smoke • Smells The Benefits of Breathing Ionized Air? • Reduction of asthma attacks, tendency to colds and flu • Reduction of respiratory allergies • Increased mental focus • Improved night rest • Reduction of irritability and insomnia Comfort, Wellness, Cleanliness Vertical air diffusers With over 1,000 calibrated holes, the air spreads like a silent and delicate caress of well-being. Compared to traditional systems, Flowy's patented vertical air diffusers • Avoid annoying direct air flows. • They better distribute conditioned and ionized air • Avoid loss of efficiency and flow rate • They are motorized to have a multidirectional 3D effect in combination with the horizontal flap Simple cleaning and maintenance for always top efficiency Technological innovation and care in design make Flowy the ideal air conditioner for ease of installation and maintenance with particular attention to the healthy maintenance of the product through: • "Self Clean" automatic cleaning function of the exchanger through thermal shock and activated by remote control • Anti-mould function , for drying the exchanger to prevent the formation of mould, which would otherwise cause bad odours • Anti-mould treatment of the internal exchanger The particular structure of Flowy allows the quick release of the air filters positioned on the upper part of the unit and the removal of the horizontal and vertical deflectors for cleaning the fan compartment: in this way Flowy will always be efficient and sanitized to create well-being and comfort desired environment. A special support template also allows you to distance Flowy from the wall to facilitate installation and extraordinary maintenance operations and allowing for optimization of intervention times and costs Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Outdoor Unit: Model: External Unit Catalog Code: KMX2 18HE Connectable Indoor Units : 2 Energy efficiency: SEER : 6.1 SCOP : 4.0 Cooling Energy Efficiency Class: A++ Heating Energy Efficiency Class: A+ Annual cooling/heating consumption: 304/1537 kWh/a Performance Cooling Capacity: 5.30 kW Heating Capacity: 5.57 kW Cooling absorption : 1.63 kW Heating absorption : 1.39 kW Sound pressure level : 56 dB(A) Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant gas : R-32 Pipe diameter Liquid : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Dimensions: External Unit Dimensions (LxHxP): 800x554x333 mm Weight of Outdoor Unit: 36 Kg Attention, only the external unit will be supplied MULTI Unical combinations Example : System consisting of 1 outdoor unit and 4 indoor units Optimal comfort in any environment Unical's MULTI systems make it possible to reduce outdoor installation dimensions without having to give up the optimal comfort of the indoor rooms to be air-conditioned. In fact, a wide range of outdoor units can manage from 2 up to 5 indoor units of different types and power. If the sum of the powers of the indoor units exceeds that of the outdoor unit, the system will automatically distribute the total power among the various Indoor Units. There are therefore many possible combinations with the MULTI range. The outdoor units are available in five models with different powers: this allows for great system flexibility to satisfy all residential and commercial needs. It is possible to install the internal unit with the power that best suits the size and shape of each room to be air-conditioned. The comfort in the room is guaranteed by: DC Inverter technology: continuous progressive modulation allows the rotary compressor to adjust the absorbed power according to the number of indoor units required and according to the set temperature, obtaining electricity savings of 20% compared to traditional systems. Heat pump even with low outside temperatures , thanks to the variable speed fan of the outdoor unit. Constant temperature in the room , thanks to the modulation of the compressor power which avoids annoying temperature swings typical of on/off systems. Thermo- assisted modulating expansion valves : regulate the pressure of the refrigerant to always have the maximum yield from the refrigeration circuit according to the working conditions of the entire system. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: Indoor unit code: PS10 18HI Outdoor unit code: PS10 18HE Refrigerant: R32 Technology: Inverters Energy efficiency: Cooling efficiency SEER: 6.10 SCOP coefficient of performance: 4.00 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Annual energy consumption in cooling/heating: 304/1435 KWh/A Performance: Cooling capacity: 5.30 kW Heating capacity: 4.10 kW Air flow: 880 m3/h Indoor unit sound pressure (db(A)): 41.5 Max Outdoor Unit Sound Pressure (db(A)): 55 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch): (1/4"/1/2") Dimensions and weight: Indoor Unit (LxWxH): 1068x675x235 mm; 28 kgs Outdoor Unit (LxWxH): 800x554x333 mm ; 33.7 kgs General characteristics Floor/Ceiling Design in the foreground Particular attention has been paid to the design of these machines with rounded and modern lines which have been designed for installation in elegant environments, either on the floor or on the ceiling. They are suitable for medium/large sized residential or commercial environments. The indoor unit is equipped with a large fin that allows the orientation of the main throw and a motorized oscillating deflector that allows a second positioning of the air flow using the remote control. The command and control electronic card, which is equipped with an Intronics microprocessor, is integrated with an important additional function called " Watchdog " which, in the event of a malfunction of the microprocessor due to sudden changes in voltage, automatically restores regular operation, thus avoiding dangerous current overloads to the microprocessor. Depending on the space available, this unit can be installed on the floor or on the ceiling. Series features: Exchange batteries with large ventilation surface Rotary compressor (Scroll type for models 36H-48H-60H) Automatic defrosting system Self-diagnosis Autorestart Emergency power button R32 gas refrigerant Automatic condensation control Functions managed by the remote control Cooling down Dehumidification Heating Ventilation only Sleep Air swing Programmable On/Off timer Automatic operation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical Features Model: Indoor unit code: PS10 36HI External unit code: PS10 36HE Refrigerant: R-32 Technology: Inverter Energy Efficiency: Cooling efficiency SEER: 6.10 SCOP Coefficient of Performance: 4.0 Energy Efficiency Class (Cooling): A++ Energy Efficiency Class (Heating): A+ Annual energy consumption in cooling/heating: 564/3675 KWh/A Performance: Cooling capacity: 10.50 kW Heating capacity: 8.40 kW Air flow: 2160 m3/h Sound pressure indoor unit (db(A)): 51 External Unit Sound Pressure max (db(A)): 58.5 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Pipes Liquid / Gas Line: inch 3/8"/5/8" Dimensions and weight: Internal Unit (WxDxH): 1650x675x235 mm; 39 Kg External Unit (WxDxH): 946x810x410 mm; 81.5 kg General Features Floor/Ceiling Design in the spotlight Particular care has been taken in the design of these machines with rounded and modern lines that have been designed for installation in elegant environments, either on the floor or on the ceiling. They are suitable for medium/large sized environments, residential or commercial. The internal unit is equipped with large fins that allow the orientation of the main throw and a motorized oscillating deflector that allows a second positioning of the air flow via the remote control. The electronic command and control board, which is equipped with an Intronics microprocessor, is integrated with an important additional function called “ Watchdog ” which, in the event of a malfunction of the microprocessor due to voltage fluctuations, automatically restores its regular operation, thus avoiding dangerous current overloads to the microprocessor. Depending on the space available, this unit can be installed on the floor or on the ceiling. Series Features: Exchange batteries with large ventilation surface Rotary compressor (Scroll type for 36H-48H-60H models) Automatic defrosting system Self-diagnosis Autorestart Emergency power button R-32 gas refrigerant Automatic condensation control Functions managed by remote control Cooling Dehumidification Heating Ventilation only Sleep Air swing Programmable On/Off Timer Automatic operation Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less