Check out our large selection of tubing and insulation to fit your plumbing and thermal system needs. Find high-quality pipes for drinking water, heating and air conditioning, along with insulation materials to reduce heat losses.
Pipes and Insulation
GEORG FISHER Elbow FF 3" Galvanized
THREADED FITTING IN MALLEABLE CAST IRON WITH WHITE CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS AND GASES
€27,16
-
TIEMME RACCORDERIA Valv.Sfera Built-in 16 X Mult.Press
PRESS FITTING FOR MULTILAYER, TH SYSTEM.
€19,20
-
WAVIN Tube 2 Glass Mt 1,5 110 Wavin
PP PIPE, GRAY. WALL THICKNESS:1.8.
€11,84
SCTubes Copper Tube Smisol Clim Platinum For Air Conditioning 50 Meters Thickness 0.8 Mm With Diameter 1/4 - 3/8 - 1/2 1/4"
Technical features Dimensions Outer Diameter : 6,35mm (1/4") - 9,52mm (3/8") - 12,70mm (1/2) Thickness : 0.8mm Roll length : 50m De : Outside diameter Sp : Thickness Minimum Coating Thickness Minimum Coating Thickness 1/4 : 6 mm Minimum Coating Thickness 3/8 : 8 mm Minimum Coating Thickness 1/2 : 10 mm Burst Pressure Burst Pressure 1/4 : 56.54 MPa Burst Pressure 3/8 : 37.71 MPa Burst Pressure 1/2 : 28.27 MPa Operating pressure Working Pressure 1/4 : 14.14 MPa Working Pressure 3/8 : 9.43 MPa Working Pressure 1/2 : 7.07 MPa Water content Water Content 1/4 : 0.018 l/m Water Content 3/8 : 0.049 l/m Water Content 1/2 : 0.097 l/m SMISOL®Clim Platinum The climate specialist It is the copper pipe produced according to the EN 12735-1 standard, and is pre-insulated in closed cell expanded polyethylene of regular dimensions and uniformly distributed (UNI EN 14114). It is distributed in rolls. The diameter of the copper pipe, as required by the EN 12735-1 standard, is expressed in inches. The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which imposes the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment. The thickness of the sheath is also sized in such a way as to satisfy the multiple needs of this application sector. In consideration of the particular specificity of the field of use, special attention is paid to the external protective film in polyethylene aimed at preventing the formation of condensation on the external wall of the product. SMISOL®Clim Platinum is also characterized by particularly low eccentricity values, a very important feature for flaring operations. Inner surface The internal surface of the copper tube is shiny, clean and dry , fundamental characteristics of a product normally available on the market for industrial use. This peculiarity allows to obtain an integrated system with the terminal elements of the system. The particular internal cleanliness of SMISOL®Clim Platinum is safeguarded by closing the ends of each roll with caps, directly during production Coating Features Thermal conductivity: l≤ 0.040 W/m°C Average value of the resistance factor to the diffusion of water vapor "μ" > 15,000 Average density of the coating: 30 kg/ m3 Free from ammonia residues Excellent resistance to external chemical agents Non flammable class 1 (DM 26/06/84) Behavior in fire: BLs1d0 (EN 13501-1) and class 1 (DM 26/06/84) Free from CFC and HCFC (Reg. EEC/EU 2037/2000) Pigmentation of the outer film “Silver grey” Greater resistance to UV rays Halogen-free flame retardant Fields of Use Conditioning Transport of refrigerant gases. (R32, R410A, R407,...) In compliance with and within the limits established by the regulations. External Protection Covering in closed cell expanded polyethylene with an average value of the resistance factor to the diffusion of water vapor "μ" greater than 15,000 . The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which imposes the use of expanded insulating sheaths without the use of CFC and HCFC, gases harmful to health and the environment and has a fire behavior class BLs1d0 (EN 13501-1) and class 1 (DM 26/06/84). The outer polyethylene film contains a darker pigment than the traditional white in order to counteract the crystallization process of PE. Furthermore, the normal anti-UV additives have an antagonistic effect towards the flame retardant necessary for the product. In order to avoid this inconvenience, the sheath of SMISOL®Clim Platinum contains an ecological halogen-free flame retardant which does not counteract the anti-UV action. Tests carried out according to the ASTM G-155 standard (accelerated aging) demonstrate that SMISOL®Clim Platinum is suitable in areas with strong annual solar radiation . At the end of the exposure test, the sample did not show any signs of degradation Accelerated Aging Test The test provides for a duration of 4,000 hours of exposure in a weatherometer with a CI65 Xenon lamp which is equivalent in Kly to about 3 years of continuous exposure in Northern Italy or 2 years in Southern Italy Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€140,00 - €275,00
-
SCTubes Smisol Frio Copper Pipe Smisol Frio For Chilled Water 50 Meters 16 X 1 Mm Coated In Polyethylene
Technical features Dimensions External Diameter: 16 mm Thickness : 1mm Roll length : 50m Minimum Coating Thickness: 10 mm Burst Pressure: 28.05 MPa Working Pressure : 7.01 MPa Water Content: 0.154 l/m SMISOL® Frio Fears neither heat nor cold It is the copper pipe produced according to the EN 12735-1 standard (and ASTM B 68/M), and is pre-insulated in closed cell expanded polyethylene of regular dimensions and uniformly distributed (UNI EN 14114). It is distributed in rolls, having the dimensions of the pipe diameter in millimeters. The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which imposes the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment. The thickness of the sheath is also sized in such a way as to satisfy the multiple needs of this application sector. In consideration of the particular specificity of the field of use, special attention is paid to the external protective film in polyethylene aimed at preventing the formation of condensation on the external wall of the product. Inner surface The internal surface of the copper tube is shiny, clean and dry , fundamental characteristics of a product normally available on the market for industrial use. This peculiarity allows to obtain an integrated system with the terminal elements of the system. The particular internal cleanliness of SMISOL® Frio is safeguarded by closing the ends of each roll with caps, directly during production. External Protection Covering in closed cell expanded polyethylene with an average value of the resistance factor to the diffusion of water vapor "µ" greater than 15000 . The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which imposes the use of expanded insulating sheaths without the use of CFC and HCFC, gases harmful to health and the environment and has a fire behavior class BL-s1-d0 according to EN 13501-1. Coating Features Thermal conductivity : λ ≤0.040 W/m°C. Average value of the resistance factor to the diffusion of water vapor "µ" greater than 15000. Average density of the coating: 33 kg/m3. Free from ammonia residues. Excellent resistance to external chemical agents. Non flammable class BL-s1-d0 according to EN 13501-1 Free from CFC and HCFC (Reg. CEE/UE 2037/2000) Directions For Design To avoid possible condensation phenomena on the pipe, it is necessary to check the environmental conditions in which the product is installed: relative humidity of the environment, temperature of the environment and of the fluid inside the pipe. In this regard, verification through the Psychrometric diagram is recommended Fields of Use Refrigeration. Transport of heat transfer liquids for multifunctional systems Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€545,00
-
GEBERIT Tube 2 Glasses Mt 2 90 Silent
3 LAYER TUBE. RESISTANT TO LOW AND TEMPERATURES. ACOUSTICLY OPTIMIZED. RESISTANT TO ULTRAVIOLET RAYS. RESISTANT TO AGGRESSIVE SUBSTANCES. PRE-ASSEMBLED EPDM SEALS.
€26,17
-
Foma Foma Plast Copper Pipe for Water and Sanitary Systems 50 Meters 14 X 1 Mm Pvc Coated
Technical features Dimensions External Diameter: 14 mm Thickness : 1mm Roll length : 50m Minimum Coating Thickness: 1.5 mm Burst Pressure: 29.87 MPa Working Pressure : 7.47 MPa Water Content: 0.11 l/m Foma Plast Coated Pipes for Sanitary Uses PLAST coated copper pipe is produced using the most modern drawing technologies; the in-line control on 100% of the production and the constant verification of the dimensional characteristics guarantee maximum safety. This guarantee of quality allows us to supply the copper tube in accordance with the specifications requested by the customer, according to various standardized regulations and, if required, according to the European standard CE EN 1057. The same care and attention are employed in the choice of materials and in the coating production processes ensuring maximum protection from attacks exerted by the materials used for the construction We also recall that copper is a metal whose chemical-physical characteristics are essential for energy saving and is also applied in green building Characteristics of the Copper Pipe Alloy: Copper Cu-DHP 99.90 min. Dimensions and tolerances: upon specific request by the customer according to various standardized regulations or, if required, according to the European standard CE EN 1057. Carbon residue: < 0.20 mg / dm² Physical state: Annealed (R 220 according to EN 1057 standard) Excellent corrosion resistance Made according to the prescriptions of the DPR n. 1095/68 Usage Water and sanitation systems Compressed air systems Non-buried gas systems Coating characteristics Stellar PVC coating PVC coating with a special "star" sheath Ivory Coating Thickness: 1.5mm approx. Fire resistance: self-extinguishing Marking: lasered every metre Odorless and non-toxic Excellent plasticity and abrasion resistance Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€335,00
-
SCTubes Copper Pipe Smisol One Sctubes For Heating 50 Meters 10x1 Mm Coated In Expanded Polyethylene
Technical features Dimensions External Diameter: 10 mm Thickness : 1.0mm Roll length : 50m Minimum Coating Thickness: 6 mm Burst Pressure: 44.88 MPa Working Pressure : 11.22 MPa Water Content: 0.050 l/m SMISOL®One Versatile and professional It is the copper pipe produced according to the EN 1057 standard, pre-insulated during production with expanded polyethylene with a closed cell structure of regular and uniformly distributed dimensions. The insulating sheath is also externally protected by a special polyethylene film. Insulated according to Law 10/91 and relative implementation decree (DPR412/93), for the distribution of the heat transfer fluid inside heated rooms . The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which imposes the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment. The production process ensures the absolute adherence of the insulating sheath to the external wall of the copper pipe, so as to avoid the formation of cavities which have a negative effect on the thermal insulation capacity. The production process of the pipe, coated directly in line, guarantees the absolute malleability of the product and ease of installation. Furthermore, to protect the final consumer, in compliance with EU Regulation 305/2011 for construction products (CPR), the copper pipes manufactured by SCT according to EN1057 are marked with the CE mark . A further guarantee of compliance with current legislation is given by obtaining the UNI-IGQ quality mark Internal Protection It has proven bacteriostatic properties , which make it the ideal material for water-sanitary networks, in order to prevent bacterial proliferation such as Legionellosis. SMISOL® One complies with DM174/04 (GU 166 of 17/07/04) which defines the conditions which materials in contact with drinking water must meet. During production, it is subjected to a patented passivation and stabilization treatment of the internal wall which makes it absolutely reliable in compliance with the potability parameters established by the European legislation on transported potable water (European Directive 98/83 and DL 31/ 01). It has a carbon residue C <0.06 mg/dm2, much lower than that required by the EN 1057 standard, which establishes a carbon content C ≤0.20 mg/dm2 External Protection The insulating sheath is in closed-cell expanded PE in compliance with EEC/EU Reg. 2037/2000 (without the use of CFC and HCFC) with an external green polyethylene film and corrugated surface. The cladding has class BL-s1-d0 fire behavior according to EN 13501-1 Coating Features Thermal conductivity : λ ≤0.040 W/m°C. Average density of the coating: 30 kg/m3 Minimum thickness of the coating: 6 mm (9 mm for the diameter 22 x 1 mm) continuously controlled with laser gauge. Free from ammonia residues. Excellent resistance to external chemical agents Non flammable class BL-s1-d0 according to EN 13501-1 Free from CFC and HCFC (Reg. CEE/UE 2037/2000) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€270,00
-
GEORG FISHER Cross 11/2" Galvanized
THREADED FITTING IN MALLEABLE CAST IRON WITH WHITE CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS AND GASES
€12,55
-
TIEMME RACCORDERIA Curved connection Dp. 25 X Mult. tm
TIGHTEN FITTING FOR MULTILAYER
€9,21
-
GEORG FISHER Tee 4" Galvanized
THREADED FITTING IN MALLEABLE CAST IRON WITH WHITE CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS AND GASES.
€62,83
-
GEBERIT Tube 2 Glasses Mt 3 50 Silent
3 LAYER TUBE. RESISTANT TO LOW AND TEMPERATURES. ACOUSTICLY OPTIMIZED. RESISTANT TO ULTRAVIOLET RAYS. RESISTANT TO AGGRESSIVE SUBSTANCES. PRE-ASSEMBLED EPDM SEALS.
€19,40
You have seen 264 out of 387 products