Check out our large selection of tubing and insulation to fit your plumbing and thermal system needs. Find high-quality pipes for drinking water, heating and air conditioning, along with insulation materials to reduce heat losses.
Pipes and Insulation
SCTubes Copper Pipe Smisol 8 Scubes For Heating 50 Meters 14 X 0.8 Mm Coated In Expanded Polyethylene
Technical features Dimensions External Diameter: 14 mm Thickness : 0.8mm Roll length : 50m Minimum Coating Thickness: 6 mm Burst Pressure: 25.65 MPa Working Pressure : 6.41 MPa Water Content: 0.1208 l/m SMISOL® 8 Versatile and professional SCT, with the expansion of its production range to 0.8 mm thickness , aims to offer the market a product with the best possible quality/price ratio; ensuring ease of installation and technical performance, as well as total compliance with current standards. SMISOL®8 contains a copper tube with a special internal passivation treatment, which perfectly complies with the EN 1057 standard and is CE marked as required by EU Regulation 305/2011 . Even the new dimensional range of SMISOL ® 8 has the UNI-IGQ Quality mark , which guarantees its compliance with current legislation. Offering SCT pipes with the UNI-IGQ brand means providing your customers with a further added value given by the certainty of an independent and recognized quality brand Field of Use Hot and cold drinking water Heating Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€315,00
-
SCTubes Copper Pipe Smisol Gas Sctubes For Distribution Of Liquid And Gaseous Fuels 50 Meters 18 X 1 Mm Pvc Coated
Technical features Dimensions External Diameter: 18 mm Thickness : 1mm Roll length : 50m Minimum Coating Thickness: 1.5 mm Burst Pressure: 24.93 MPa Working Pressure : 6.23 MPa Water Content: 0.201 l/m SMISOL® Gas Resistant and non-permeable It is the copper pipe produced according to the EN 1057 standard covered during production with a special sheath with a full (non-star) section in polyvinyl chloride (PVC) in compliance with the UNI 10823 standard. The properties of SMISOL®Gas in terms of melting point, resistance to fire and pressure, impermeability to gas and absolute sealing of brazing and joints, become indispensable in the case of domestic distribution of combustible gas, where safety guarantees are essential and obligatorily provided for by the technical standards and by the provisions of the law. Furthermore, to protect the final consumer, in compliance with EU Regulation 305/2011 for construction products (CPR) , the copper pipes manufactured by SCT according to EN1057 are marked with the CE mark . A further guarantee of compliance with current legislation is given by obtaining the UNI-IGQ quality mark Internal Protection During production, it is subjected to a patented treatment of passivation and stabilization of the internal wall . The SMISOL®Gas copper pipe has a carbon residue C < 0.06 mg/dm2 , much lower than that required by the EN 1057 standard, which establishes a carbon content C ≤ 0.20 mg/dm2 External Protection Coating in stabilized polyvinyl resin, tested and guaranteed. The coating protects against external attacks from building materials (e.g. quick-setting concrete) and against damage caused by impacts during transport to the construction site. It allows use in the field of underground pipes , as indicated by the same UNI 10823 standard: "the coating is obtained through extrusion, without welding, in continuous, externally and internally smooth, with uniform nominal thickness, adhering to the external wall of the copper pipe for its entire surface to guarantee the absence of residual air pockets and prevent them from slipping off”. It is tested online in order to guarantee the electrical insulation resistance which, as required by the UNI 10823 standard, must be equal to or greater than 100 MΩm2, furthermore it satisfies the requirements of the UNI 7129 regarding the omission of the installation of the required dielectric joint for underground sections with a length not exceeding 3 m Coating Features Coating in special stabilized PVC resin. Full section (non-stellar) according to UNI 10823. Minimum thickness coating thickness: 1.5 mm (continuously checked with laser gauge). Sheath produced with top quality virgin granulate. Excellent resistance to external chemical agents. Ink marking every metre. Electrical insulation resistance: ≥ 100 MΩm2 (UNI 10823) Fields of Use Distribution of liquid and gaseous fuels with particular reference to underground installation In compliance with and within the limits established by the regulations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€545,00
-
SCTubes Copper Pipe Smisol Gas Sctubes For Distribution Of Liquid And Gaseous Fuels 50 Meters 16 X 1 Mm Pvc Coated
Technical features Dimensions External Diameter: 16 mm Thickness : 1mm Roll length : 50m Minimum Coating Thickness: 1.5 mm Burst Pressure: 28.05 MPa Working Pressure : 7.01 MPa Water Content: 0.154 l/m SMISOL® Gas Resistant and non-permeable It is the copper pipe produced according to the EN 1057 standard covered during production with a special sheath with a full (non-star) section in polyvinyl chloride (PVC) in compliance with the UNI 10823 standard. The properties of SMISOL®Gas in terms of melting point, resistance to fire and pressure, impermeability to gas and absolute sealing of brazing and joints, become indispensable in the case of domestic distribution of combustible gas, where safety guarantees are essential and obligatorily provided for by the technical standards and by the provisions of the law. Furthermore, to protect the final consumer, in compliance with EU Regulation 305/2011 for construction products (CPR) , the copper pipes manufactured by SCT according to EN1057 are marked with the CE mark . A further guarantee of compliance with current legislation is given by obtaining the UNI-IGQ quality mark Internal Protection During production, it is subjected to a patented treatment of passivation and stabilization of the internal wall . The SMISOL®Gas copper pipe has a carbon residue C < 0.06 mg/dm2 , much lower than that required by the EN 1057 standard, which establishes a carbon content C ≤ 0.20 mg/dm2 External Protection Coating in stabilized polyvinyl resin, tested and guaranteed. The coating protects against external attacks from building materials (e.g. quick-setting concrete) and against damage caused by impacts during transport to the construction site. It allows use in the field of underground pipes , as indicated by the same UNI 10823 standard: "the coating is obtained through extrusion, without welding, in continuous, externally and internally smooth, with uniform nominal thickness, adhering to the external wall of the copper pipe for its entire surface to guarantee the absence of residual air pockets and prevent them from slipping off”. It is tested online in order to guarantee the electrical insulation resistance which, as required by the UNI 10823 standard, must be equal to or greater than 100 MΩm2, furthermore it satisfies the requirements of the UNI 7129 regarding the omission of the installation of the required dielectric joint for underground sections with a length not exceeding 3 m Coating Features Coating in special stabilized PVC resin. Full section (non-stellar) according to UNI 10823. Minimum thickness coating thickness: 1.5 mm (continuously checked with laser gauge). Sheath produced with top quality virgin granulate. Excellent resistance to external chemical agents. Ink marking every metre. Electrical insulation resistance: ≥ 100 MΩm2 (UNI 10823) Fields of Use Distribution of liquid and gaseous fuels with particular reference to underground installation In compliance with and within the limits established by the regulations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€480,00
-
SCTubes Copper Pipe Smisol Gas Sctubes For Distribution Of Liquid And Gaseous Fuels 50 Meters 14 X 1 Mm Pvc Coated
Technical features Dimensions External Diameter: 14 mm Thickness : 1mm Roll length : 50m Minimum Coating Thickness: 1.5 mm Burst Pressure: 32.06 MPa Working Pressure : 8.01 MPa Water Content: 0.113 l/m SMISOL® Gas Resistant and non-permeable It is the copper pipe produced according to the EN 1057 standard covered during production with a special sheath with a full (non-star) section in polyvinyl chloride (PVC) in compliance with the UNI 10823 standard. The properties of SMISOL®Gas in terms of melting point, resistance to fire and pressure, impermeability to gas and absolute sealing of brazing and joints, become indispensable in the case of domestic distribution of combustible gas, where safety guarantees are essential and obligatorily provided for by the technical standards and by the provisions of the law. Furthermore, to protect the final consumer, in compliance with EU Regulation 305/2011 for construction products (CPR) , the copper pipes manufactured by SCT according to EN1057 are marked with the CE mark . A further guarantee of compliance with current legislation is given by obtaining the UNI-IGQ quality mark Internal Protection During production, it is subjected to a patented treatment of passivation and stabilization of the internal wall . The SMISOL®Gas copper pipe has a carbon residue C < 0.06 mg/dm2 , much lower than that required by the EN 1057 standard, which establishes a carbon content C ≤ 0.20 mg/dm2 External Protection Coating in stabilized polyvinyl resin, tested and guaranteed. The coating protects against external attacks from building materials (e.g. quick-setting concrete) and against damage caused by impacts during transport to the construction site. It allows use in the field of underground pipes , as indicated by the same UNI 10823 standard: "the coating is obtained through extrusion, without welding, in continuous, externally and internally smooth, with uniform nominal thickness, adhering to the external wall of the copper pipe for its entire surface to guarantee the absence of residual air pockets and prevent them from slipping off”. It is tested online in order to guarantee the electrical insulation resistance which, as required by the UNI 10823 standard, must be equal to or greater than 100 MΩm2, furthermore it satisfies the requirements of the UNI 7129 regarding the omission of the installation of the required dielectric joint for underground sections with a length not exceeding 3 m Coating Features Coating in special stabilized PVC resin. Full section (non-stellar) according to UNI 10823. Minimum thickness coating thickness: 1.5 mm (continuously checked with laser gauge). Sheath produced with top quality virgin granulate. Excellent resistance to external chemical agents. Ink marking every metre. Electrical insulation resistance: ≥ 100 MΩm2 (UNI 10823) Fields of Use Distribution of liquid and gaseous fuels with particular reference to underground installation In compliance with and within the limits established by the regulations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€415,00
-
WAVIN Curve Wc 1 Attack 110/50 Wavin
COMPLETE WITH EDPDM GASKET
€12,44
-
€17,73
-
GEORG FISHER Bend 90 FF 2" Galvanized
THREADED FITTING IN MALLEABLE CAST IRON WITH WHITE CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS AND GASES WHILE THE CODE WITHOUT "PO" IS A THREADED FITTING IN MALLEABLE CAST IRON WITH BLACK CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS " COMMERCIAL TYPE"
€14,05
-
GEBERIT Braga Graft Rid.45110/40 Silent
RESISTANT TO LOW AND HIGH TEMPERATURES. ACOUSTICLY OPTIMIZED. RESISTANT TO ULTRAVIOLET RAYS. RESISTANT TO AGGRESSIVE SUBSTANCES. PRE-ASSEMBLED EPDM SEALS.
€12,74
-
WAVIN Braga Double Red. 45 90/50/50 Wav
COMPLETE WITH SINGLE LIP EPDM GASKET
€10,85
-
REMS Pressing Jaws Mod.V 18 X Copper
MADE OF FORGED AND SPECIAL TEMPERED STEEL. PARTICULARLY SUITABLE FOR BATTERY AND WIRE PRESSERS, NOT FOR MANUAL PRESSERS.
€146,60
-
RM RACCORDERIA Black Reduction Weld. 168.3x114.3 mm
REDUCTION MADE FROM SEAMLESS PIPE
€24,49
-
GEBERIT Straight Fitting Wc 110 Silent
RESISTANT TO LOW AND HIGH TEMPERATURES. ACOUSTICLY OPTIMIZED. RESISTANT TO ULTRAVIOLET RAYS. RESISTANT TO AGGRESSIVE SUBSTANCES. SUPPLIED WITH EPDM SLEEVE AND PROTECTIVE CAP
€22,41
You have seen 24 out of 387 products