THREADED FITTING IN MALLEABLE CAST IRON WITH WHITE CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS AND GASES.

Read more less

PRESS FITTING FOR MULTILAYER, TH SYSTEM

Read more less

General characteristics Brand: Tiemme EAN: 8027830110053 Data sheet Fitting diameters: 11/4" x 40mm Fitting shape: Straight Fitting connection: Male Fitting for multilayer: Yes Fitting type: Press System Type: TH

Read more less

Technical features Dimensions External Diameter: 16 mm Thickness : 1mm Dimensions Outside Diameter of the Tube: 28 mm Roll length : 50m Burst Pressure: 26.14 MPa Working Pressure : 6.54 MPa Water Content: 0.1539 l/m Foma Special Gas Coated Copper Pipes for Gas Plumbing This special pre-sheathed copper pipe, created for the distribution of liquid and gaseous fuels, is particularly suitable for insertion into masonry structures, where it is necessary to use sheaths of plastic material. The advantage of using this product is made evident by the type of structure with which this sheath is made, since it is high-density closed-cell expanded polyethylene with seven spacers, which, during the production phase, are given a twist so as to make them a spiral; this allows the pipe to be bent without the sheath channels being interrupted, thus facilitating the evacuation of any leaks. The copper pipe contained is produced according to the customer's requests, according to various standardized regulations or, if required, according to the European standard CE EN 1057 and the dimensional range complies with the provisions of UNI CIG 7129, which in point 3.3.1.4 prescribes , for the crossing of solid walls, perforated and prefabricated panels, that the pipe is protected, without joints and welds, with a through sheath walled up with mortar and cement. Characteristics of the Copper Pipe Alloy: Copper Cu-DHP 99.90 min. Dimensions and tolerances: upon specific request by the customer according to various standardized regulations or, if required, according to the European standard CE EN 1057. Carbon residue: < 0.20 mg / dm² Physical state: Annealed (R 220 according to EN 1057 standard) Excellent corrosion resistance Jobs Liquid and gaseous fuels GAS systems for domestic use Coating characteristics Coating in high density closed cell polyethylene Complies with EEC/EU 2037/2000 regulation for environmental protection Yellow color Helically wound spacers Air gap: 5mm. minimum Fire resistance: Class 1 self-extinguishing Excellent resistance to atmospheric agents Marking: in ink Odorless and non-toxic Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Dimensions External Diameter: 16 mm Thickness : 1.0mm Roll length : 50m Minimum Coating Thickness: 6 mm Burst Pressure: 28.05 MPa Working Pressure : 7.01 MPa Water Content: 0.154 l/m SMISOL®One Versatile and professional It is the copper pipe produced according to the EN 1057 standard, pre-insulated during production with expanded polyethylene with a closed cell structure of regular and uniformly distributed dimensions. The insulating sheath is also externally protected by a special polyethylene film. Insulated according to Law 10/91 and relative implementation decree (DPR412/93), for the distribution of the heat transfer fluid inside heated rooms . The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which imposes the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment. The production process ensures the absolute adherence of the insulating sheath to the external wall of the copper pipe, so as to avoid the formation of cavities which have a negative effect on the thermal insulation capacity. The production process of the pipe, coated directly in line, guarantees the absolute malleability of the product and ease of installation. Furthermore, to protect the final consumer, in compliance with EU Regulation 305/2011 for construction products (CPR), the copper pipes manufactured by SCT according to EN1057 are marked with the CE mark . A further guarantee of compliance with current legislation is given by obtaining the UNI-IGQ quality mark Internal Protection It has proven bacteriostatic properties , which make it the ideal material for water-sanitary networks, in order to prevent bacterial proliferation such as Legionellosis. SMISOL® One complies with DM174/04 (GU 166 of 17/07/04) which defines the conditions which materials in contact with drinking water must meet. During production, it is subjected to a patented passivation and stabilization treatment of the internal wall which makes it absolutely reliable in compliance with the potability parameters established by the European legislation on transported potable water (European Directive 98/83 and DL 31/ 01). It has a carbon residue C <0.06 mg/dm2, much lower than that required by the EN 1057 standard, which establishes a carbon content C ≤0.20 mg/dm2 External Protection The insulating sheath is in closed-cell expanded PE in compliance with EEC/EU Reg. 2037/2000 (without the use of CFC and HCFC) with an external green polyethylene film and corrugated surface. The cladding has class BL-s1-d0 fire behavior according to EN 13501-1 Coating Features Thermal conductivity : λ ≤0.040 W/m°C. Average density of the coating: 30 kg/m3 Minimum thickness of the coating: 6 mm (9 mm for the diameter 22 x 1 mm) continuously controlled with laser gauge. Free from ammonia residues. Excellent resistance to external chemical agents Non flammable class BL-s1-d0 according to EN 13501-1 Free from CFC and HCFC (Reg. CEE/UE 2037/2000) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Dimensions External Diameter: 14 mm Thickness : 1mm External diameter of the tube: 26 mm Roll length : 50m Burst Pressure: 32.06 MPa Working Pressure : 8.01 MPa Water Content: 0.113 l/m SMISOL® Tekgas Practical and Safe SMISOL® Tekgas is the copper pipe produced according to the EN 1057 standard, coated during production with a special low-density closed-cell structure polyethylene sheath, manufactured in the sizes required by UNI 7129. Thanks to the particularity of the coating, co-extruded continuously on the copper pipe, and in the presence of spacers wound in a helical direction with respect to the axis of the pipe, it is particularly suitable for the transport of liquid and gaseous fuels. Spacers ensure that the sheath has an internal diameter that is 10 mm larger than the external diameter of the pipe. This geometric peculiarity allows the pipe to be used for crossing walls and floors without adding an additional metal sheath in full compliance with UNI 7129-1 which states in point 4.4.1.5: "When crossing perimeter and external walls, bricks blocks, perforated bricks and prefabricated panels, the gas supply pipe must not have joints, with the exception of the inlet and outlet joints and must be protected with a gas-tight through sheath. The sheath can be indifferently metal or polymeric material, the sheath must have an internal diameter greater than 10 mm compared to the external diameter of the pipe. This pipe can be laid concealed even in critical situations where the walls contain cavities (for example perforated bricks) this is always possible thanks to the polymeric sheath that continuously wraps the copper pipe, during installation it is sufficient to drown SMISOL® Tekgas in 15 mm of cement mortar to comply with the provisions of UNI 7129-1 point 4.5.5.5 and point 4.5.5.6. The helical shape of the spacers ensures that the interspace between the pipe and the sheath remains constant even in the 90° bends, avoiding crushing, in this way in the event of a leak, the danger of the formation of gas pockets is avoided. The in-line coating process ensures high malleability, superior to similar products on the market. In order to preserve this exclusive feature, the rolls of SMISOL®Tekgas have a very large winding diameter which, with the characteristics already described, make them a practical and particularly professional product at the same time. Furthermore, to protect the final consumer, in compliance with EU Regulation 305/2011 for construction products (CPR) , the copper pipes manufactured by SCT according to EN1057 are marked with the CE mark . A further guarantee of compliance with current legislation is given by obtaining the UNI-IGQ quality mark Internal Protection During production, it is subjected to a patented treatment of passivation and stabilization of the internal wall . SMISOL®Tekgas copper pipe has a carbon residue C < 0.06 mg/dm2, much lower than that required by the EN 1057 standard, which establishes a carbon content C ≤ 0.20 mg/dm2 External Protection The low-density closed-cell polyethylene coating protects the pipe from attacks exerted from the outside by building materials (e.g. quick-setting cement) and from damage caused by knocks during transport to the construction site. It complies with the reg. CEE/UE 2037/2000 and has a fire behavior of class BLs1d0 (EN 13501-1) and class 1 (DM 26/06/84) Folding With reference to the bending methods using a special tube bender, it should be noted that the matrices and counter matrices to be used can differ significantly according to the brand and model used. For any information and clarification, you can contact us on the toll-free number or e-mail address listed on the cover Coating Features Covered in closed cell low density polyethylene. Helically wound spacers. Air gap: 5 mm min. Excellent resistance to external chemical agents. Ink marking every metre. Class 1 non-flammable Behavior in fire: BLs1d0 (EN 13501-1) and class 1 (DM 26/06/84) Fields of Use Distribution of liquid and gaseous fuels with particular reference to masonry structures where the use of non-metallic sheath pipes is necessary In compliance with and within the limits established by the regulations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Dimensions External Diameter: 10 mm Thickness : 1.0mm Roll length : 25m Minimum Coating Thickness: 9 mm Burst Pressure: 20.40 MPa Working Pressure: 5.10 MPa Water Content: 0.314 l/m SMISOL®One Versatile and professional It is the copper pipe produced according to the EN 1057 standard, pre-insulated during production with expanded polyethylene with a closed cell structure of regular and uniformly distributed dimensions. The insulating sheath is also externally protected by a special polyethylene film. Insulated according to Law 10/91 and relative implementation decree (DPR412/93), for the distribution of the heat transfer fluid inside heated rooms . The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which imposes the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment. The production process ensures the absolute adherence of the insulating sheath to the external wall of the copper pipe, so as to avoid the formation of cavities which have a negative effect on the thermal insulation capacity. The production process of the pipe, coated directly in line, guarantees the absolute malleability of the product and ease of installation. Furthermore, to protect the final consumer, in compliance with EU Regulation 305/2011 for construction products (CPR), the copper pipes manufactured by SCT according to EN1057 are marked with the CE mark . A further guarantee of compliance with current legislation is given by obtaining the UNI-IGQ quality mark Internal Protection It has proven bacteriostatic properties , which make it the ideal material for water-sanitary networks, in order to prevent bacterial proliferation such as Legionellosis. SMISOL® One complies with DM174/04 (GU 166 of 17/07/04) which defines the conditions which materials in contact with drinking water must meet. During production, it is subjected to a patented passivation and stabilization treatment of the internal wall which makes it absolutely reliable in compliance with the potability parameters established by the European legislation on transported potable water (European Directive 98/83 and DL 31/ 01). It has a carbon residue C <0.06 mg/dm2, much lower than that required by the EN 1057 standard, which establishes a carbon content C ≤0.20 mg/dm2 External Protection The insulating sheath is in closed-cell expanded PE in compliance with EEC/EU Reg. 2037/2000 (without the use of CFC and HCFC) with an external green polyethylene film and corrugated surface. The cladding has class BL-s1-d0 fire behavior according to EN 13501-1 Coating Features Thermal conductivity : λ ≤0.040 W/m°C. Average density of the coating: 30 kg/m3 Minimum thickness of the coating: 6 mm (9 mm for the diameter 22 x 1 mm) continuously controlled with laser gauge. Free from ammonia residues. Excellent resistance to external chemical agents Non flammable class BL-s1-d0 according to EN 13501-1 Free from CFC and HCFC (Reg. CEE/UE 2037/2000) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Dimensions Average External Diameter ( Min - Max ) : 40 - 40.8 mm Dimensions Average Internal Diameter (Real - Min): 31 > 30 mm Roll length : 50m Compressive strength : 5% of the internal diameter Outer Layer Appearance : Corrugated / Grey Appearance Inner Layer : Smooth / Black Impact resistance : normal Folding resistance : Foldable Resistance against chemical aggression : Without protection Applications : Protection and installation of insulated conductors and/or cables in electrical and telecommunications systems up to 1,000 V ac and 1,500 V. dc Picenum Plast Your trusted partner The Picenum Plast spa company has been producing PVC and PE pipes since 1974 in compliance with current national and international regulations. Since 1995, this reality has been operating in a company quality system certified by the SQP body of the Italian Institute of Plastics. Since 2008 it has strengthened its commitment by implementing an Integrated Quality and Environmental Management System certified by the Italian Institute of Plastics in compliance with the UNI EN ISO 9001:2008 and UNI EN ISO 14001:2004 standards respectively for design and production activities of PE, PVC and corrugated pipes. The high specialization and breadth of the production range make Picenum Plast a complete reality and a secure partner. Picenum Plast items are designed and produced with the aim of satisfying our customers. Our company has increased the range and number of pipes over the years; has enhanced quality control activities on raw materials and finished products to guarantee customers: variety, high quality and maximum safety in the various sectors of interest, from construction to infrastructure and irrigation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THREADED FITTING IN MALLEABLE CAST IRON WITH WHITE CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS AND GASES WHILE THE CODE WITHOUT "PO" IS A THREADED FITTING IN MALLEABLE CAST IRON WITH BLACK CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS " COMMERCIAL TYPE"

Read more less

Technical features Dimensions External Diameter: 16 mm Thickness : 1mm Roll length : 50m Minimum Coating Thickness: 1.5 mm Burst Pressure: 26.14 MPa Working Pressure : 6.54 MPa Water Content: 0.1539 l/m Foma Plast Gas Coated Copper Pipes for Gas Plumbing PLAST insulated copper pipe is produced using the most modern drawing technologies; the in-line control on 100% of the production and the constant verification of the dimensional characteristics guarantee maximum safety. This guarantee of quality allows us to supply the copper tube in accordance with the specifications requested by the customer, according to various standardized regulations or, if required, according to the European standard CE EN 1057. The same care and attention are employed in the choice of materials and in the coating production processes ensuring maximum protection from attacks exerted by the materials used for the construction. We also recall that copper is a metal whose chemical-physical characteristics are essential for energy saving and is also applied in green building Characteristics of the Copper Pipe Alloy: Copper Cu-DHP 99.90 min. Dimensions and tolerances: upon specific request by the customer according to various standardized regulations or, if required, according to the European standard CE EN 1057. according to the standard EN 1057 Carbon residue: < 0.20 mg / dm² Physical state: Annealed (R 220) Excellent corrosion resistance Made according to the prescriptions of the DPR n. 1095/68 Jobs Domestic use gas systems (UNI CIG 7129) Liquid fuel distribution systems (UNI CIG 7129) Water and sanitation systems Compressed air systems Coating characteristics PVC coating with smooth sheath adhering to the pipe made according to the UNI 10823 standard Yellow color Coating Thickness: 1.5mm approx. Fire resistance: self-extinguishing Marking: lasered every metre Odorless and non-toxic Excellent plasticity and abrasion resistance Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

.

Read more less

PP PIPE, GRAY COLOUR. WALL THICKNESS:1.8

Read more less