Check out our large selection of tubing and insulation to fit your plumbing and thermal system needs. Find high-quality pipes for drinking water, heating and air conditioning, along with insulation materials to reduce heat losses.
Pipes and Insulation
SCTubes Copper Pipe Smisol One Scubes For Heating 50 Meters 16x1 Mm Coated In Expanded Polyethylene
Technical features Dimensions External Diameter: 16 mm Thickness : 1.0mm Roll length : 50m Minimum Coating Thickness: 6 mm Burst Pressure: 28.05 MPa Working Pressure : 7.01 MPa Water Content: 0.154 l/m SMISOL®One Versatile and professional It is the copper pipe produced according to the EN 1057 standard, pre-insulated during production with expanded polyethylene with a closed cell structure of regular and uniformly distributed dimensions. The insulating sheath is also externally protected by a special polyethylene film. Insulated according to Law 10/91 and relative implementation decree (DPR412/93), for the distribution of the heat transfer fluid inside heated rooms . The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which imposes the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment. The production process ensures the absolute adherence of the insulating sheath to the external wall of the copper pipe, so as to avoid the formation of cavities which have a negative effect on the thermal insulation capacity. The production process of the pipe, coated directly in line, guarantees the absolute malleability of the product and ease of installation. Furthermore, to protect the final consumer, in compliance with EU Regulation 305/2011 for construction products (CPR), the copper pipes manufactured by SCT according to EN1057 are marked with the CE mark . A further guarantee of compliance with current legislation is given by obtaining the UNI-IGQ quality mark Internal Protection It has proven bacteriostatic properties , which make it the ideal material for water-sanitary networks, in order to prevent bacterial proliferation such as Legionellosis. SMISOL® One complies with DM174/04 (GU 166 of 17/07/04) which defines the conditions which materials in contact with drinking water must meet. During production, it is subjected to a patented passivation and stabilization treatment of the internal wall which makes it absolutely reliable in compliance with the potability parameters established by the European legislation on transported potable water (European Directive 98/83 and DL 31/ 01). It has a carbon residue C <0.06 mg/dm2, much lower than that required by the EN 1057 standard, which establishes a carbon content C ≤0.20 mg/dm2 External Protection The insulating sheath is in closed-cell expanded PE in compliance with EEC/EU Reg. 2037/2000 (without the use of CFC and HCFC) with an external green polyethylene film and corrugated surface. The cladding has class BL-s1-d0 fire behavior according to EN 13501-1 Coating Features Thermal conductivity : λ ≤0.040 W/m°C. Average density of the coating: 30 kg/m3 Minimum thickness of the coating: 6 mm (9 mm for the diameter 22 x 1 mm) continuously controlled with laser gauge. Free from ammonia residues. Excellent resistance to external chemical agents Non flammable class BL-s1-d0 according to EN 13501-1 Free from CFC and HCFC (Reg. CEE/UE 2037/2000) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€420,00
-
Foma Foma Special Gas Copper Pipe For Liquid And Gaseous Fuels 50 Meters 16 X 1 Mm Coated In High Density Polyethylene
Technical features Dimensions External Diameter: 16 mm Thickness : 1mm Dimensions Outside Diameter of the Tube: 28 mm Roll length : 50m Burst Pressure: 26.14 MPa Working Pressure : 6.54 MPa Water Content: 0.1539 l/m Foma Special Gas Coated Copper Pipes for Gas Plumbing This special pre-sheathed copper pipe, created for the distribution of liquid and gaseous fuels, is particularly suitable for insertion into masonry structures, where it is necessary to use sheaths of plastic material. The advantage of using this product is made evident by the type of structure with which this sheath is made, since it is high-density closed-cell expanded polyethylene with seven spacers, which, during the production phase, are given a twist so as to make them a spiral; this allows the pipe to be bent without the sheath channels being interrupted, thus facilitating the evacuation of any leaks. The copper pipe contained is produced according to the customer's requests, according to various standardized regulations or, if required, according to the European standard CE EN 1057 and the dimensional range complies with the provisions of UNI CIG 7129, which in point 3.3.1.4 prescribes , for the crossing of solid walls, perforated and prefabricated panels, that the pipe is protected, without joints and welds, with a through sheath walled up with mortar and cement. Characteristics of the Copper Pipe Alloy: Copper Cu-DHP 99.90 min. Dimensions and tolerances: upon specific request by the customer according to various standardized regulations or, if required, according to the European standard CE EN 1057. Carbon residue: < 0.20 mg / dm² Physical state: Annealed (R 220 according to EN 1057 standard) Excellent corrosion resistance Jobs Liquid and gaseous fuels GAS systems for domestic use Coating characteristics Coating in high density closed cell polyethylene Complies with EEC/EU 2037/2000 regulation for environmental protection Yellow color Helically wound spacers Air gap: 5mm. minimum Fire resistance: Class 1 self-extinguishing Excellent resistance to atmospheric agents Marking: in ink Odorless and non-toxic Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€390,00
-
TIEMME RACCORDERIA Tiemme Straight Fitting For Multilayer Male Connection Type To Press Th System Diameters 11/4” X 40 Mm
General characteristics Brand: Tiemme EAN: 8027830110053 Data sheet Fitting diameters: 11/4" x 40mm Fitting shape: Straight Fitting connection: Male Fitting for multilayer: Yes Fitting type: Press System Type: TH
€13,01
-
TIEMME RACCORDERIA Curved Coupling F.11/2x50 X Mult.A Pres.
PRESS FITTING FOR MULTILAYER, TH SYSTEM
€42,25
-
GEORG FISHER Galvanized MF2" union
THREADED FITTING IN MALLEABLE CAST IRON WITH WHITE CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS AND GASES.
€19,10
-
GEORG FISHER Elbow MF 21/2" Galvanized
THREADED FITTING IN MALLEABLE CAST IRON WITH WHITE CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS AND GASES WHILE THE CODE WITHOUT "PO" IS A THREADED FITTING IN MALLEABLE CAST IRON WITH BLACK CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS " COMMERCIAL TYPE"
€20,44
-
RM RACCORDERIA Black Reduction Weld. 114.3 x 88.9 mm
REDUCTION MADE FROM SEAMLESS PIPE
€8,32
-
GEORG FISHER Reduction 3"X11/4" Galvanized
THREADED FITTING IN MALLEABLE CAST IRON WITH WHITE CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS AND GASES WHILE THE CODE WITHOUT "PO" IS A THREADED FITTING IN MALLEABLE CAST IRON WITH BLACK CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS " COMMERCIAL TYPE"
€13,79
-
TIEMME RACCORDERIA Tiemme Reduced AT Fitting For Pressed Multilayer Intermediate Type Th System Diameters 26x20x26 Mm
General characteristics Brand: Tiemme EAN: 8027830211064 Data sheet Fitting diameters: 26x20x26 mm Typology: Reduced Intermediate Shape: AT For multilayer: Yes Pressing: Yes System: TH
€12,22
-
TIEMME RACCORDERIA Tiemme AT Fitting For Pressed Multilayer Pipes Intermediate Type Diameters 26x26x26 Mm
General characteristics Brand: Tiemme EAN: 8027830211088 Data sheet Fitting diameters: 26x26x26 mm Pressing system: TH Typology: Intermediate For multilayer pipes: Yes Fitting shape: AT
€11,29
-
TIEMME RACCORDERIA Tiemme AT Fitting Female Coupling To Press For Multilayer Pipes Diameters 32 Mm X 1” X 32 Mm
General characteristics Brand: Tiemme EAN: 8027830211415 Data sheet Fitting shape: AT Diameters: 32mm x 1” x 32mm Pressing: Yes For multilayer pipes: Yes Type of coupling: Female Suitable pressing system: TH
€20,63
-
PRANDELLI Tee Ppr Phil. M.1" 32
FOR PN20 PIPES
€12,34
You have seen 180 out of 387 products