Technical features Overall power (max-min): 16.1 - 4.1 kW Rated power (max-min): 15.0 - 4.0 kW Power delivered to water (max - min): 12.7 - 2.8 kW Power delivered to the environment (max - min): 2.3 - 1.2 kW Hourly pellet consumption (max-min): 0.8 - 3.4 kg-h Heatable volume: 320 m3 Efficiency (max-min): 96.5 - 93.56% Fumes exhaust duct: 80 ø mm Pellet tank capacity: 29 - 19 litres-kg Autonomy (max-min): 20 - 6 h Operating electric power: 140 - 350 W Dimensions (LxWxH): 1100 x 250 x 1000 mm Weight: 120kg General characteristics PELLET STOVES   Why Wood or Pellet? The need to use alternative energy sources arises spontaneously. Using wood is nothing more than the rediscovery of the primordial source of heating, focusing on a Renewable Energy. In fact, wood and pellets are among the renewable sources and the carbon dioxide (CO2) emitted for the production of energy does not increase that present in the environment, but is the same that the plants first absorbed to develop and which would into the atmosphere through the normal decomposition processes of wood at the end of their life cycle. The use of wood and pellets therefore puts carbon dioxide C02 into the atmosphere making it available again to plants which will absorb it through the process of chlorophyll photosynthesis. The thermal energy produced from wood or pellets is an intelligent eco-sustainable and at the same time economic alternative if compared to fossil fuels since the purchase price is 50/60% lower. Absolute convenience using wood or pellets. Those who heat with wood become independent of traditional energy sources and the supply of wood is always guaranteed. Heating with wood means heating following the natural cycle of CO2 (carbon dioxide). During combustion, the wood is released into the atmosphere a quantity of CO2 equal to that which a tree would develop after being felled, in the decomposition phase; the same amount that a healthy shrub could absorb anyway. For this reason, the use of energy obtainable from wood is to be considered neutral from the point of view of CO2 emissions and does not contribute in the least to the increase in the greenhouse effect; on the contrary, for every liter of fuel replaced by wood, significant quantities of CO2 emissions are avoided. The use of wood and pellet stoves reduce costs while increasing the heat output. KING IDRO SLIM 16   Steel cladding, majolica top Frontal radiation Ash drawer Heat exchanger with manual cleaning system Safety thermostat Internal thermostat Arrangement for external thermostat Weekly chronothermostat Remote control Circulation pump Expansion tank 3 bar safety valve Automatic air vent valve

Read more less

A 10% DEPOSIT IS REQUIRED FOR CASH ON DELIVERY PAYMENTS ON THE STOVES Technical features Dimensions : 633x1176x624 mm Net weight : 215 Kg Smoke outlet diameter: 80 mm heated m3 : 540 m3 Power yield to liquid: 3.9–15.7 kW Ambient output power: 1.4–3.1 kW Nominal thermal power useful: 5.3–18.8 kW Overall thermal power: 5.5–20.5 kW Exchanger fluid content : 18.5 Operating pressure : 2.5 bar Efficiency : >91 % Hourly consumption: 1.2-4.2 Kg/h Total tank capacity: ~ 35 Kg Forced ventilation : Yes Remote control : Yes Safety thermostat : Yes External thermostat preset: Yes Power consumption: 90-110W Draft : ~10 Pa Pump and expansion tank : Yes Ext. air intake pipe : 50mm Weekly chronothermostat : Yes 3 bar safety valve : Yes *NB First ignition not compulsory for a fee, stoves already lit in the company! General characteristics PELLET THERMOSTOVES La Nordica-Extraflame wood-burning and pellet-burning thermoproducts make use of technologically advanced design solutions that allow you to heat your home in total respect for the environment with excellent heat output and low wood consumption. The thermo-products are particular devices designed for connection to the home heating system (for example the radiators or the underfloor system), they can be easily integrated into the existing boiler or to a solar thermal system for the production of domestic hot water . The choice of the appliance to be installed must be made according to specific individual needs, thus evaluating the overall thermal power required and the method with which the thermo-stove will be connected to the system. You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. The control panel allows automatic ignition and the setting of the heating power, establishing the desired temperature thanks to the built-in room thermostat. RAFFAELA IDRO Coating in painted steel Front ventilation with the possibility of exclusion Ash drawer Heat exchanger with manual cleaning system Safety thermostat Internal thermostat Arrangement for external thermostat (TA) Weekly chronothermostat Remote control Circulation pump Expansion tank 3 bar safety valve This product is certified 4 stars according to the emissions and performance requirements of the Aria Pulita certification. To find out more, visit the dedicated page . Pellet stove technologies: AUTO CLEAN CHECK UP increases the efficiency of the combustion and the life of the parts subject to wear and, at the same time, decreases the ordinary cleaning of the brazier ROOM TEMPERATURE CONTROL the presence of the ambient probe optimizes comfort and leads to a significant reduction in consumption. CHRONO THERMOSTAT PROGRAM chronothermostat with temperature control divided into four daily bands, for optimal room management NETWORK SYSTEM system that allows, even when you are away from home, to interact with Extraflame devices via GPRS system or graphic display RESISTANT DOOR AT THE TIME the doors of the products made of high quality cast iron are unalterable over time and guarantee a constant seal DIGITAL PRESSURE CONTROL system that allows any malfunctions relating to the hydraulic pressure to be displayed on the display DELAY STOP SYSTEM delayed shutdown of the stove KEYLOCK SYSTEM allows you to lock the display keypad to prevent improper or accidental use of the device (key lock) AUTO RE-START the appliance switches back on automatically following a power blackout, after having carried out the foreseen cycle of checks ELECTRONIC AIR CONTROL primary and secondary air electronically balanced for optimal combustion and thermal efficiency CLEAN GLASS CONTROL It is a system which effectively avoids the formation of deposits on the glass of the fire door through a specific path of preheated air PELLETS LEVEL CONTROL adjusts the quantity of pellets to be introduced into the combustion chamber TEMPERATURE CONTROL INTERFACE the product interfaces with the home temperature control devices (thermostats and contacts) to obtain the desired temperature in the rooms. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

A 10% DEPOSIT IS REQUIRED FOR CASH ON DELIVERY PAYMENTS ON THE STOVES Technical features Dimensions : L 793 x H 1105 x D 384 mm Net weight : 151 Kg Smoke outlet diameter: 100 mm heated m3 : 415 m³ Power delivered to water: 3.7-12.3 kW Nominal thermal power useful : 4.3-14.5 kW Global thermal power: 4.5-15.6 kW Efficiency : >93 % Hourly consumption: 0.9-3.2 kg/h Total tank capacity: ~ 22 Kg Power consumption: 65-80W Draft : ~10 Pa Ext. air intake pipe : 60mm *NB First ignition not compulsory for a fee, stoves already lit in the company! PELLET THERMOSTOVES La Nordica-Extraflame wood-burning and pellet-burning thermoproducts make use of technologically advanced design solutions that allow you to heat your home in total respect for the environment with excellent heat output and low wood consumption. The thermo-products are particular devices designed for connection to the home heating system (for example the radiators or the underfloor system), they can be easily integrated into the existing boiler or to a solar thermal system for the production of domestic hot water . The choice of the appliance to be installed must be made according to specific individual needs, thus evaluating the overall thermal power required and the method with which the thermo-stove will be connected to the system. You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. The control panel allows automatic ignition and the setting of the heating power, establishing the desired temperature thanks to the built-in room thermostat. General characteristics VIRNA HYDRO Heating stove with «sealed chamber» and «hermetic» tank Ceramic glow plug with latest generation ignition system Fumes discharge through a Ø100 rear, top or right side outlet PWM pump managed by the electronic board Removable ash drawer Coating in painted steel Shell and tube heat exchanger with turbulators and manual cleaning Combustion chamber probe Safety thermostat Without ventilation Weekly chronothermostat Safety pressure switch Cast iron brazier Cast iron door LCD display Multifunction remote control.    This product is certified 4 stars according to the emission and efficiency requirements of the Aria Pulita certification. To find out more, visit the dedicated page . Pellet stove technologies: AUTO CLEAN CHECK UP increases the efficiency of the combustion and the life of the parts subject to wear and, at the same time, decreases the ordinary cleaning of the brazier CHRONO THERMOSTAT PROGRAM chronothermostat with temperature control divided into four daily bands, for optimal room management RESISTANT DOOR AT THE TIME the doors of the products made of high quality cast iron are unalterable over time and guarantee a constant seal DIGITAL PRESSURE CONTROL System that allows any malfunctions relating to the hydraulic pressure to be displayed on the display. DELAY STOP SYSTEM delayed shutdown of the stove KEYLOCK SYSTEM allows you to lock the display keypad to prevent improper or accidental use of the device (key lock) HARD RESET PROGRAM Restoration of the initial factory preset data, in the event of a programming error. AUTO RE-START the appliance switches back on automatically following a power blackout, after having carried out the foreseen cycle of checks ELECTRONIC AIR CONTROL primary and secondary air electronically balanced for optimal combustion and thermal efficiency CLEAN GLASS CONTROL It is a system which effectively avoids the formation of deposits on the glass of the fire door through a specific path of preheated air TEMPERATURE CONTROL INTERFACE the product interfaces with the home temperature control devices (thermostats and contacts) to obtain the desired temperature in the rooms RATE ADJUSTMENT PROGRAM In two simple steps we can adjust the strength of the ventilation and, where present, of the ducting. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

A 10% DEPOSIT IS REQUIRED FOR THE PURCHASES OF STOVES ON DELIVERY Select the color in the drop down menu Technical features Model : ENERGYCA 30 S Heatable volume : 68 m³ Coating in painted steel Structure : Steel, cast iron, majolica Combustion chamber: Steel Performance Introduced power: 7.25 - 29.10 kW Nominal thermal power 6.86 - 27.40 kW Power delivered to air: 1.07 - 3.80 kW Power delivered to water: 5.80 - 23.60 kW Hourly fuel consumption : 1.49 - 6.02 kg/h Smoke outlet temperature: 77.10° - 131.72° C Flue draught: 10 - 14 Pa Minimum safety distance (back - right/left side - floor): 200 - 200 - 0 mm Tank capacity : 48.0 kg Camera capacity: 23.0 litres Smoke outlet diameter: 100 m Air intake diameter: 50 mm Dimensions and weight Dimensions (LxHxP): 654x1245x628 cm Weight 228.0kg FREE FIRST START-UP Anselmo Cola leather heating stoves A great operating autonomy COLA pellet thermo-stoves have great autonomy, greater heat exchange with higher efficiency and the possibility of being connected to the heating system, in addition to or replacing the existing boiler. The main features of Cola pellet heating stoves are: Cast iron brazier with cast iron frame and panoramic self-cleaning ceramic glass Large heat exchange surface on the camera Automatic cleaning of the brazier to keep combustion constant and for reduced maintenance Automatic switching on and off from weekly chronothermostat function up to 4 daily switching on/off Alarm and service diagnostics that are easy to interpret and intervene on Management of up to 3 foreign languages ​​in addition to the Italian version Large glazed surface to improve the visibility of the flame Possibility of connection with external thermostat/chrono thermostat with cable Removable ash drawer Adjustable feet on the base of the appliance to facilitate installation even on uneven floors Heating hydraulic circuit composed of: circulator with non-return valve on the union, 3 bar safety valve, pressure transducer, drain cock with system, expansion vessel with membrane and relevant heating water delivery and return connections Group B domestic hot water circuit for external boiler made up of circulator with non-return valve on the union, connection pipes on the hydraulic heating circuit and relative delivery and return connections for connections to the boiler coil (optional, excluding thermo max) Telephone connection via GSM module (optional) Safety systems present: anti-explosion valve integrated in the upper cast iron exchanger, overtemperature safety thermostat, pellet tank and pressure gauge to ensure safe operation of the appliance Sanitary water production unit with storage tank (optional thermo power - thermo power lux) Possibility of combustion air intake from outside ENERGYCA 30S High performance Pellet stove with predisposition for external combustion air intake Standard remote control for remote operations Pellet stove for hydraulic heating circuit Automatic cleaning of the cola patented cast iron brazier/brazier holder system New products Pellet heating stove with steel cladding, painted cast iron door, manual exchanger cleaning system, standard circulation pump and expansion vessel, 3 bar safety valve, supplementary circulator, exchanger. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

A 10% DEPOSIT IS REQUIRED FOR THE PURCHASES OF STOVES ON DELIVERY NB: PRODUCT AVAILABLE ON ORDER Technical features Dimensions : 690x1196x628mm Net weight : 255 kg Smoke outlet diameter: 100 mm heated m3 : 545 m3 Power rendered to the liquid: 3.9-15.5 kW Ambient output power: 1.4-3.1 kW Nominal thermal power useful : 5.3-19 kW Global thermal power: 5.5-20.5 kW Efficiency : >91 % Hourly consumption : 1.2-4.3 kg/h Total tank capacity: ~ 35 kg Forced ventilation : Yes Remote control : Yes Internal thermostat : Yes Safety thermostat : Yes External thermostat preset: Yes Power consumption: 130-150W Draft : ~1 mm H2O Pump and expansion tank : Yes Ext. air intake pipe : 50mm Weekly chronothermostat : Yes 3 bar safety valve : Yes General characteristics PELLET THERMOSTOVES La Nordica-Extraflame wood-burning and pellet-burning thermoproducts make use of technologically advanced design solutions that allow you to heat your home in total respect for the environment with excellent heat output and low wood consumption. The thermo-products are particular devices designed for connection to the home heating system (for example the radiators or the underfloor system), they can be easily integrated into the existing boiler or to a solar thermal system for the production of domestic hot water . The choice of the appliance to be installed must be made according to specific individual needs, thus evaluating the overall thermal power required and the method with which the thermo-stove will be connected to the system. You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. The control panel allows automatic ignition and the setting of the heating power, establishing the desired temperature thanks to the built-in room thermostat. ISIS IDRO 2.0 Majolica cladding Front ventilation with the possibility of exclusion Removable ash drawer Heat exchanger with manual cleaning system Safety thermostat Internal thermostat Arrangement for external thermostat (TA) Weekly chronothermostat Remote control Circulation pump Expansion vessel 3 bar safety valve This product is certified 3 stars according to the emission and efficiency requirements of the Aria Pulita certification. To find out more, visit the dedicated page . Pellet stove technologies: AUTO CLEAN CHECK UP increases the efficiency of the combustion and the life of the parts subject to wear and, at the same time, decreases the ordinary cleaning of the brazier ROOM TEMPERATURE CONTROL the presence of the ambient probe optimizes comfort and leads to a significant reduction in consumption. CHRONO THERMOSTAT PROGRAM chronothermostat with temperature control divided into four daily bands, for optimal room management NETWORK SYSTEM system that allows, even when you are away from home, to interact with Extraflame devices via GPRS system or graphic display RESISTANT DOOR AT THE TIME the doors of the products made of high quality cast iron are unalterable over time and guarantee a constant seal DIGITAL PRESSURE CONTROL system that allows any malfunctions relating to the hydraulic pressure to be displayed on the display DELAY STOP SYSTEM delayed shutdown of the stove KEYLOCK SYSTEM allows you to lock the display keypad to prevent improper or accidental use of the device (key lock) AUTO RE-START the appliance switches back on automatically following a power blackout, after having carried out the foreseen cycle of checks ELECTRONIC AIR CONTROL primary and secondary air electronically balanced for optimal combustion and thermal efficiency CLEAN GLASS CONTROL It is a system which effectively avoids the formation of deposits on the glass of the fire door through a specific path of preheated air PELLETS LEVEL CONTROL adjusts the quantity of pellets to be introduced into the combustion chamber TEMPERATURE CONTROL INTERFACE the product interfaces with the home temperature control devices (thermostats and contacts) to obtain the desired temperature in the rooms.

Read more less

A 10% DEPOSIT IS REQUIRED FOR CASH ON DELIVERY PAYMENTS ON THE STOVES Technical features Dimensions : L 793 x H 1105 x D 384 mm Net weight : 151 Kg Smoke outlet diameter: 100 mm heated m3 : 415 m³ Power delivered to water: 3.7-12.3 kW Nominal thermal power useful : 4.3-14.5 kW Global thermal power: 4.5-15.6 kW Efficiency : >93 % Hourly consumption: 0.9-3.2 kg/h Total tank capacity: ~ 22 Kg Power consumption: 65-80W Draft : ~10 Pa Ext. air intake pipe : 60mm *NB First ignition not compulsory for a fee, stoves already lit in the company! PELLET THERMOSTOVES La Nordica-Extraflame wood-burning and pellet-burning thermoproducts make use of technologically advanced design solutions that allow you to heat your home in total respect for the environment with excellent heat output and low wood consumption. The thermo-products are particular devices designed for connection to the home heating system (for example the radiators or the underfloor system), they can be easily integrated into the existing boiler or to a solar thermal system for the production of domestic hot water . The choice of the appliance to be installed must be made according to specific individual needs, thus evaluating the overall thermal power required and the method with which the thermo-stove will be connected to the system. You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. The control panel allows automatic ignition and the setting of the heating power, establishing the desired temperature thanks to the built-in room thermostat. General characteristics VIRNA HYDRO Heating stove with «sealed chamber» and «hermetic» tank Ceramic glow plug with latest generation ignition system Fumes discharge through a Ø100 rear, top or right side outlet PWM pump managed by the electronic board Removable ash drawer Coating in painted steel Shell and tube heat exchanger with turbulators and manual cleaning Combustion chamber probe Safety thermostat Without ventilation Weekly chronothermostat Safety pressure switch Cast iron brazier Cast iron door LCD display Multifunction remote control.    This product is certified 4 stars according to the emission and efficiency requirements of the Aria Pulita certification. To find out more, visit the dedicated page . Pellet stove technologies: AUTO CLEAN CHECK UP increases the efficiency of the combustion and the life of the parts subject to wear and, at the same time, decreases the ordinary cleaning of the brazier CHRONO THERMOSTAT PROGRAM chronothermostat with temperature control divided into four daily bands, for optimal room management RESISTANT DOOR AT THE TIME the doors of the products made of high quality cast iron are unalterable over time and guarantee a constant seal DIGITAL PRESSURE CONTROL System that allows any malfunctions relating to the hydraulic pressure to be displayed on the display. DELAY STOP SYSTEM delayed shutdown of the stove KEYLOCK SYSTEM allows you to lock the display keypad to prevent improper or accidental use of the device (key lock) HARD RESET PROGRAM Restoration of the initial factory preset data, in the event of a programming error. AUTO RE-START the appliance switches back on automatically following a power blackout, after having carried out the foreseen cycle of checks ELECTRONIC AIR CONTROL primary and secondary air electronically balanced for optimal combustion and thermal efficiency CLEAN GLASS CONTROL It is a system which effectively avoids the formation of deposits on the glass of the fire door through a specific path of preheated air TEMPERATURE CONTROL INTERFACE the product interfaces with the home temperature control devices (thermostats and contacts) to obtain the desired temperature in the rooms RATE ADJUSTMENT PROGRAM In two simple steps we can adjust the strength of the ventilation and, where present, of the ducting Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Please note! If the product is not immediately available, it will be ordered and shipped within 10 working days.   Technical Features Dimensions: 538x1034x543 mm Net weight: 170 kg Smoke outlet diameter: 80 mm m3 heatable: 344 m 3 Power output to liquid: 3.0-10.8 kW Power output environment: 0.6-1.2kW Nominal useful thermal power: 3.6-12.0 kW Overall thermal power: 3.9-14 kW Yield: > 91% Hourly consumption: 0.8-2.8 kg/h Total tank capacity: ~ 20 kg Forced ventilation: No Remote Control : Yes Internal thermostat: No Safety thermostat: Yes External thermostat pred.: Yes Power consumption: 110-130 W Draft : ~1 mm H2O Pump and expansion vessel: Yes External air intake pipe: 50 mm Weekly chronothermostat: Yes Safety valve 3 bar: Yes *NB First ignition not obligatory for payment, stoves already lit in the company! General Features PELLET THERMO STOVES La Nordica-Extraflame wood and pellet thermoproducts make use of technologically advanced design solutions that allow you to heat your home with total respect for the environment with excellent heat output and low wood consumption. Thermoproducts are special devices designed to be connected to the home heating system (for example radiators or underfloor heating), they can be easily integrated into the existing boiler or a solar thermal system for the production of domestic hot water. The choice of the device to be installed must be made following the specific individual needs, therefore evaluating the overall thermal power required and the way in which the thermostove will be connected to the system. You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with very high calorific value, obtained by pressing residues and fragments of the best wood, without adding glue; just think that the real efficiency of the same is close to 90%. The control panel allows automatic ignition and setting of the heating power, establishing the desired temperature thanks to the built-in room thermostat. DUCHESS IDRO STEEL Painted steel cladding Removable ash drawer Heat exchanger with manual cleaning system Safety thermostat Provision for external thermostat (TA) Weekly chronothermostat Remote control Circulation pump Expansion vessel 3 bar safety valve Pellet stove technologies: CAR CLEAN CHECKUP increases combustion efficiency and the life of parts subject to wear and, at the same time, reduces the need for ordinary cleaning of the brazier CHRONO THERMOSTAT PROGRAM chronothermostat with temperature control divided into four daily bands, for optimal management of the environments NETWORK SYSTEM system that allows you to interact with Extraflame devices via GPRS system or graphic display, even when you are away from home DOOR RESISTANT AT TIME The doors of the products made of high quality cast iron are unalterable over time and guarantee a constant seal KEYLOCK SYSTEM allows you to lock the display keypad to prevent improper or accidental use of the device (key lock) AUTO RE-START the appliance switches itself back on automatically following a power failure, after having carried out the required check cycle ELECTRONIC AIR CONTROL Electronically balanced primary and secondary air for optimal combustion and thermal efficiency CLEAN GLASS CONTROL It is a system that, through a specific pre-heated air path, effectively prevents the formation of deposits on the glass of the fire door. PELLET LEVEL CONTROL regulates the quantity of pellets to be introduced into the combustion chamber INTERFACE CONTROL TEMPERATURE The product interfaces with the home's temperature control devices (thermostats and contacts) to obtain the desired temperature in the rooms. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

FOR CASH ON DELIVERY PAYMENTS ON STOVES A 10% DEPOSIT IS REQUIRED Technical Features Dimensions: 533x1157x583 mm Net weight: 178 kg Smoke exhaust diameter: 100 mm m3 heatable: 407 m3 Power output to liquid: 3.0-11.7 kW Power output environment: 1.3-2.6 kW Nominal useful thermal power: 4.2-14.2 kW Overall thermal power: 4.5-15.4 kW Yield: 90% Hourly consumption: 1.2-4.3 kg/h Total tank capacity: ~ 30 kg Forced ventilation: Yes Remote Control : Yes Internal thermostat: Yes Safety thermostat: Yes External thermostat pred.: Yes Power consumption: 130-150 W Draft : ~1 mm H2O Pump and expansion vessel: Yes External air intake pipe: 50 mm Weekly chronothermostat: Yes Safety valve 3 bar: Yes *NB First ignition not obligatory for payment, stoves already lit in the company! PELLET THERMO STOVES La Nordica-Extraflame wood and pellet thermoproducts make use of technologically advanced design solutions that allow you to heat your home with total respect for the environment with excellent heat output and low wood consumption. Thermoproducts are special devices designed to be connected to the home heating system (for example radiators or underfloor heating), they can be easily integrated into the existing boiler or a solar thermal system for the production of domestic hot water. The choice of the device to be installed must be made following the specific individual needs, therefore evaluating the overall thermal power required and the way in which the thermostove will be connected to the system. You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with very high calorific value, obtained by pressing residues and fragments of the best wood, without adding glue; just think that the real efficiency of the same is close to 90%. The control panel allows automatic ignition and setting of the heating power, establishing the desired temperature thanks to the built-in room thermostat. General Features MELINDA IDRO STEEL 2.0 Painted steel cladding and majolica top. Removable ash drawer Ceramic glass resistant to 750°. Circulation pump and expansion vessel as standard. Heat exchanger with manual cleaning system. Front ventilation with the possibility of exclusion. Safety thermostat Internal thermostat Provision for external thermostat Weekly chronothermostat Remote control Circulation pump Expansion vessel 3 bar safety valve Pellet stove technologies: CAR CLEAN CHECKUP increases combustion efficiency and the life of parts subject to wear and, at the same time, reduces the need for ordinary cleaning of the brazier ROOM TEMPERATURE CONTROL the presence of the room probe optimizes comfort and leads to a significant reduction in consumption. CHRONO THERMOSTAT PROGRAM chronothermostat with temperature control divided into four daily bands, for optimal management of the environments NETWORK SYSTEM system that allows you to interact with Extraflame devices via GPRS system or graphic display, even when you are away from home DOOR RESISTANT AT TIME The doors of the products made of high quality cast iron are unalterable over time and guarantee a constant seal DIGITAL PRESSURE CONTROL system that allows you to view any malfunctions related to hydraulic pressure on the display DELAY-STOP SYSTEM delayed stove shutdown KEYLOCK SYSTEM allows you to lock the display keypad to prevent improper or accidental use of the device (key lock) AUTO RE-START the appliance switches itself back on automatically following a power failure, after having carried out the required check cycle ELECTRONIC AIR CONTROL Electronically balanced primary and secondary air for optimal combustion and thermal efficiency CLEAN GLASS CONTROL It is a system that, through a specific pre-heated air path, effectively prevents the formation of deposits on the glass of the fire door. PELLET LEVEL CONTROL regulates the quantity of pellets to be introduced into the combustion chamber INTERFACE CONTROL TEMPERATURE The product interfaces with the home's temperature control devices (thermostats and contacts) to obtain the desired temperature in the rooms Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Overall power (max-min): 23.6 - 5.4 kW Rated power (max-min): 22.14 - 5.1 kW Power delivered to water (max-min): 18.1 - 3.9 kW Power delivered to the environment (max-min): 3.8 - 1.8 kW Hourly pellet consumption (max-min): 4.04 - 1.2 kg-h Efficiency (max-min): 95.4 - 93.8% Fumes exhaust duct: 80 ø mm Pellet tank capacity: 64.6 - 42 litres-kg Autonomy (max-min): 39 - 9 h Operating electric power: 140 - 350 W Dimensions (WxDxH): 611x671x1266 mm Weight: 230kg With remote control and room fan General characteristics PELLET THERMOSTOVES The wood or pellet thermo-products make use of technologically advanced design solutions which allow the thermal power of the fire to be exploited both to heat the room and to produce hot water which feeds the traditional radiator system of the whole house. This double use makes the thermo-products unique in their kind and allows an optimal thermal yield and considerable savings. The thermo-products are particular devices designed for connection to the home heating system (for example the radiators or the underfloor system), they can be easily integrated into the existing boiler or to a solar thermal system for the production of domestic hot water . The choice of the appliance to be installed must be made according to specific individual needs, thus evaluating the overall thermal power required and the method with which the thermo-stove will be connected to the system. Why Wood or Pellet? The need to use alternative energy sources arises spontaneously. Using wood is nothing more than the rediscovery of the primordial source of heating, focusing on a Renewable Energy. In fact, wood and pellets are among the renewable sources and the carbon dioxide (CO2) emitted for the production of energy does not increase that present in the environment, but is the same that the plants first absorbed to develop and which would into the atmosphere through the normal decomposition processes of wood at the end of their life cycle. The use of wood and pellets therefore puts carbon dioxide C02 into the atmosphere making it available again to plants which will absorb it through the process of chlorophyll photosynthesis. The thermal energy produced from wood or pellets is an intelligent eco-sustainable and at the same time economic alternative if compared to fossil fuels since the purchase price is 50/60% lower. Absolute convenience using wood or pellets. Those who heat with wood become independent of traditional energy sources and the supply of wood is always guaranteed. Heating with wood means heating following the natural cycle of CO2 (carbon dioxide). During combustion, the wood is released into the atmosphere a quantity of CO2 equal to that which a tree would develop after being felled, in the decomposition phase; the same amount that a healthy shrub could absorb anyway. For this reason, the use of energy obtainable from wood is to be considered neutral from the point of view of CO2 emissions and does not contribute in the least to the increase in the greenhouse effect; on the contrary, for every liter of fuel replaced by wood, significant quantities of CO2 emissions are avoided. The use of wood and pellet stoves reduce costs while increasing the heat output. Features of pellet stoves: BRAZIER the brazier is easily removable for daily cleaning ELECTRONICS new electronics capable of predicting the weekly switch-on and switch-off schedules REMOTE CONTROL New design multi-function remote control, with LCD screen HEAT EXCHANGER shell and tube heat exchanger to increase thermal performance. Pipe sizes are reduced to avoid turbulence and noise SECONDARY CONVECTION in the combustion chamber there is a secondary convection to improve the combustion of the pellets COMBUSTION CHAMBER removable steel walls to facilitate cleaning of pellet combustion residue CLEAN GLASS air emission near the glass to prevent it from getting dirty GRILL The tank is equipped with a protective grid to prevent contact with the pellet loading mechanisms ASH COLLECTOR DRAWER drawer placed under the brazier to collect the ash produced by combustion SAFETY stove complete with temperature probes to monitor correct operation in safety FANS silence of the stove even at maximum working power PRESSURE SWITCH safety device that signals any obstructions in the smoke outlet

Read more less

Technical features Overall power (max-min): 19.6 - 5.4 kW Rated power (max-min): 18.46 - 5.1 kW Power delivered to water (max-min): 15.05 - 3.9 kW Power delivered to the environment (max-min): 3.41 - 1.2 kW Hourly pellet consumption (max-min): 4 - 1.08 kg-h Efficiency (max-min): 95.4 - 94.2% Fumes exhaust duct: 80 ø mm Pellet tank capacity: 64.6 - 42 litres-kg Autonomy (max-min): 39 - 10.5 h Operating electric power: 140 - 350 W Dimensions (WxDxH): 611x671x1266 mm Weight: 230kg With remote control and room fan General characteristics PELLET THERMOSTOVES The wood or pellet thermo-products make use of technologically advanced design solutions which allow the thermal power of the fire to be exploited both to heat the room and to produce hot water which feeds the traditional radiator system of the whole house. This double use makes the thermo-products unique in their kind and allows an optimal thermal yield and considerable savings. The thermo-products are particular devices designed for connection to the home heating system (for example the radiators or the underfloor system), they can be easily integrated into the existing boiler or to a solar thermal system for the production of domestic hot water . The choice of the appliance to be installed must be made according to specific individual needs, thus evaluating the overall thermal power required and the method with which the thermo-stove will be connected to the system. Why Wood or Pellet? The need to use alternative energy sources arises spontaneously. Using wood is nothing more than the rediscovery of the primordial source of heating, focusing on a Renewable Energy. In fact, wood and pellets are among the renewable sources and the carbon dioxide (CO2) emitted for the production of energy does not increase that present in the environment, but is the same that the plants first absorbed to develop and which would into the atmosphere through the normal decomposition processes of wood at the end of their life cycle. The use of wood and pellets therefore puts carbon dioxide C02 into the atmosphere making it available again to plants which will absorb it through the process of chlorophyll photosynthesis. The thermal energy produced from wood or pellets is an intelligent eco-sustainable and at the same time economic alternative if compared to fossil fuels since the purchase price is 50/60% lower. Absolute convenience using wood or pellets. Those who heat with wood become independent of traditional energy sources and the supply of wood is always guaranteed. Heating with wood means heating following the natural cycle of CO2 (carbon dioxide). During combustion, the wood is released into the atmosphere a quantity of CO2 equal to that which a tree would develop after being felled, in the decomposition phase; the same amount that a healthy shrub could absorb anyway. For this reason, the use of energy obtainable from wood is to be considered neutral from the point of view of CO2 emissions and does not contribute in the least to the increase in the greenhouse effect; on the contrary, for every liter of fuel replaced by wood, significant quantities of CO2 emissions are avoided. The use of wood and pellet stoves reduce costs while increasing the heat output. Features of pellet stoves: BRAZIER the brazier is easily removable for daily cleaning ELECTRONICS new electronics capable of predicting the weekly switch-on and switch-off schedules REMOTE CONTROL New design multi-function remote control, with LCD screen HEAT EXCHANGER shell and tube heat exchanger to increase thermal performance. Pipe sizes are reduced to avoid turbulence and noise SECONDARY CONVECTION in the combustion chamber there is a secondary convection to improve the combustion of the pellets COMBUSTION CHAMBER removable steel walls to facilitate cleaning of pellet combustion residue CLEAN GLASS air emission near the glass to prevent it from getting dirty GRILL The tank is equipped with a protective grid to prevent contact with the pellet loading mechanisms ASH COLLECTOR DRAWER drawer placed under the brazier to collect the ash produced by combustion SAFETY stove complete with temperature probes to monitor correct operation in safety FANS silence of the stove even at maximum working power PRESSURE SWITCH safety device that signals any obstructions in the smoke outlet

Read more less

Technical features Dimensions : 619x1304x689mm Net weight : 259 kg Smoke outlet diameter: 120 mm heated m3 : 815 m³ Power rendered to the liquid: 5.4 - 25.2 kW Ambient output power: 1.3 - 3.0 kW Nominal thermal power useful : 6.7-28.4 kW Global thermal power: 7.0 - 31.0 kW Efficiency : >90% Hourly consumption : 1.5 - 6.5 kg/h Total tank capacity: ~48 kg Remote control: Yes Safety thermostat : Yes External thermostat preset : S Electric absorption : 150 - 180 W Draft : ~10 Pa Pump and expansion tank : Yes Ext. air intake pipe : 60mm Weekly chronothermostat : Yes 3 bar safety valve : Yes To view more product information CLICK HERE General characteristics PELLET THERMOSTOVES La Nordica-Extraflame wood-burning and pellet-burning thermoproducts make use of technologically advanced design solutions that allow you to heat your home in total respect for the environment with excellent heat output and low wood consumption. The thermo-products are particular devices designed for connection to the home heating system (for example the radiators or the underfloor system), they can be easily integrated into the existing boiler or to a solar thermal system for the production of domestic hot water . The choice of the appliance to be installed must be made according to specific individual needs, thus evaluating the overall thermal power required and the method with which the thermo-stove will be connected to the system. You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. The control panel allows automatic ignition and the setting of the heating power, establishing the desired temperature thanks to the built-in room thermostat. ACS HYDRO DIADEMA Stove with majolica cladding Ash drawer Self-cleaning brazier Heat exchanger with manual cleaning system Safety thermostat Arrangement for external thermostat (TA) Weekly chronothermostat - Remote control Circulation pump Expansion vessel 3 bar safety valve Instant domestic hot water production Expansion card for integrated system management This product is certified 4 stars according to the emissions and performance requirements of the Aria Pulita certification. To find out more, visit the dedicated page . Pellet stove technologies: AUTO CLEAN CHECK UP increases the efficiency of the combustion and the life of the parts subject to wear and, at the same time, decreases the ordinary cleaning of the brazier CHRONO THERMOSTAT PROGRAM chronothermostat with temperature control divided into four daily bands, for optimal room management NETWORK SYSTEM system that allows, even when you are away from home, to interact with Extraflame devices via GPRS system or graphic display RESISTANT DOOR AT THE TIME the doors of the products made of high quality cast iron are unalterable over time and guarantee a constant seal DIGITAL PRESSURE CONTROL system that allows any malfunctions relating to the hydraulic pressure to be displayed on the display DELAY STOP SYSTEM delayed shutdown of the stove KEYLOCK SYSTEM allows you to lock the display keypad to prevent improper or accidental use of the device (key lock) AUTO RE-START the appliance switches back on automatically following a power blackout, after having carried out the foreseen cycle of checks ELECTRONIC AIR CONTROL primary and secondary air electronically balanced for optimal combustion and thermal efficiency CLEAN GLASS CONTROL It is a system which effectively avoids the formation of deposits on the glass of the fire door through a specific path of preheated air PELLETS LEVEL CONTROL adjusts the quantity of pellets to be introduced into the combustion chamber TEMPERATURE CONTROL INTERFACE the product interfaces with the home temperature control devices (thermostats and contacts) to obtain the desired temperature in the rooms HARD RESET PROGRAM restoring the initial factory data in the event of a programming error Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

A 10% DEPOSIT IS REQUIRED FOR THE PURCHASES OF STOVES ON DELIVERY Pellet heating stove KALOR model ALESSIA IDRO 14 kW in steel various colors available Technical features Heatable surface 340 Mc Dimensions (WxDxH) 492x480x1034 mm Global Thermal Power (MAX-MIN) 14.79 – 5.23 kW Hourly consumption (MAX-MIN) 3.02 – 1.07 kg Efficiency (MAX-MIN) 96.29% – 93.54% Class A++ General characteristics CALOR Kalor produces a complete range of highly efficient pellet-powered stoves: stoves for heating only the environment, thermo-stoves for heating air and water and fireplace inserts. The various production lines differ in design but are available in multiple powers to be efficient in the most diverse living contexts. The design of a pellet stove must guarantee efficiency and sustainability as the first objective. Our projects must be able to propose solutions capable of integrating the plant and energy aspects of the building with the architectural design choices in an innovative way. Our design skills reward us with the achievement of prestigious heat efficiencies but in general we are gratified to think that our heat system is able to interact effectively with the most modern integrated green systems such as photovoltaic and solar panels. Thanks to their effectiveness and efficiency, our stoves contribute to the classification of your home in energy class A. The stove: not only the cheapest source of heat but also for energy redevelopment of your home. Very high efficiency, in practical terms this means that: If 100% is the percentage of heat extrapolated from pellet combustion, 97.89% is the percentage of heat introduced into the environment, only 2.11% is the percentage of heat of exhaust fumes. These results were obtained thanks to a careful design capable of ensuring the maximum possible heat exchange. The vertical tube exchange surface involves the entire rear part of the combustion chamber which is lined with refractory material, ensuring low emissions of fine particles. ALESSIA HYDRO The aesthetics of the Nux line is based on the use of the curved line. With the same rounded line of the walnut, from which the range takes its name in Latin, the Nux stove not only heats but also furnishes with personality and character. Without ever being excessive, the delicate ellipses trace an elegant profile even for the more technical and functional elements: the display holder cap the grille for diffusing the air into the room the top top. The cubature is lightened by elegant dots that play down the volume. In this way the play of solids, voids and lines create a refined design. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less