Technical features heated m3 : 200 m3 Rated heat output: 2.64-8.02 kW Overall thermal power: 2.84-8.87 kW Hourly pellet consumption (max-min): 1.81 - 0.58 Kg-h Efficiency (max-min): 92.7 - 90.5% Fumes exhaust duct: Ø 80 mm Pellet tank capacity: 20 - 13 Liters / Kg Autonomy (max-min): 22 - 7 h Operating electrical power: 100 - 300 watts Dimensions (WxDxH): 492 x 473 x 916 mm Net weight : 82 kg Color: Bordeaux General characteristics PELLET STOVES You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. Features of pellet stoves: BRAZIER the brazier is easily removable for daily cleaning ELECTRONICS new electronics capable of predicting the weekly switch-on and switch-off schedules REMOTE CONTROL New design multi-function remote control, with LCD screen HEAT EXCHANGER shell and tube heat exchanger to increase thermal performance. Pipe sizes are reduced to avoid turbulence and noise SECONDARY CONVECTION in the combustion chamber there is a secondary convection to improve the combustion of the pellets COMBUSTION CHAMBER removable steel walls to facilitate cleaning of pellet combustion residue CLEAN GLASS air emission near the glass to prevent it from getting dirty GRILL The tank is equipped with a protective grid to prevent contact with the pellet loading mechanisms ASH COLLECTOR DRAWER drawer placed under the brazier to collect the ash produced by combustion SAFETY stove complete with temperature probes to monitor correct operation in safety FANS silence of the stove even at maximum working power PRESSURE SWITCH safety device that signals any obstructions in the smoke outlet KING 98 Designed to heat an 80m2 room, this pellet stove has among its outstanding features an advanced system of fume circulation around the combustion chamber which increases its maximum yield, bringing it to 92.7, this means that only 7.3% of the energy produced is dispersed outside. The compact design and the three colors make it easily adaptable to any environment. Suitable for those who want to heat medium-small sized rooms without neglecting energy savings. Characteristics: The King 10 Kw 9 pellet stove is able to increase thermal performance and efficiency with considerable savings on consumption costs, reaching a maximum efficiency of 92.70%. If 100% is the percentage of heat extrapolated from pellet combustion, 92.70% is the percentage of heat released into the environment, and only 8.3% is the percentage of heat from exhaust fumes. To obtain these results, careful planning was required, capable of extending the exchange surface inside the stove body, to extrapolate the maximum amount of heat from the fumes before they are pushed out of the fume extractor fan. The fumes leave the stove at a very low temperature of 149.5°C. Only after this scrupulous and compact construction does a stove become a KING stove. The stove is equipped with a multifunction remote control with an elegant design and LCD screen, a tube bundle heat exchanger to increase thermal performance and an easily removable brazier for daily cleaning. The size of the pipes has decreased to avoid turbulence and noise. The King pellet stove is designed with new electronics capable of predicting the weekly switch-on and switch-off schedules. Furthermore, in the combustion chamber there is a secondary convection to improve the combustion of the pellets. The combustion chamber features removable steel walls and a classic finish, to facilitate cleaning of pellet combustion residue. The emission of air takes place near the glass to avoid fouling. The tank is equipped with a grid so as to prevent contact with the pellet loading mechanisms. The stove is also equipped with temperature probes to monitor correct operation in safety, a pressure switch to signal any obstructions in the flue outlet and height-adjustable feet in scratch-resistant material. The fans are silent even at maximum working power and the dimensions are compact with the smallest possible footprint. The electric absorption at working regime corresponds to 100 W. The European Certifications certify the excellent thermal efficiency at the best consumption. All these features make the King 10 Kw 9 pellet stove an efficient, functional and excellent quality product.

Read more less

Technical features heated m3 : 200 m3 Rated heat output: 2.64-8.02 kW Overall thermal power: 2.84-8.87 kW Hourly pellet consumption (max-min): 1.81 - 0.58 Kg-h Efficiency (max-min): 92.7 - 90.5% Fumes exhaust duct: Ø 80 mm Pellet tank capacity: 20 - 13 Liters / Kg Autonomy (max-min): 22 - 7 h Operating electrical power: 100 - 300 watts Dimensions (WxDxH): 492 x 473 x 916 mm Net weight : 82 kg Color: Sand General characteristics PELLET STOVES You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. Features of pellet stoves: BRAZIER the brazier is easily removable for daily cleaning ELECTRONICS new electronics capable of predicting the weekly switch-on and switch-off schedules REMOTE CONTROL New design multi-function remote control, with LCD screen HEAT EXCHANGER shell and tube heat exchanger to increase thermal performance. Pipe sizes are reduced to avoid turbulence and noise SECONDARY CONVECTION in the combustion chamber there is a secondary convection to improve the combustion of the pellets COMBUSTION CHAMBER removable steel walls to facilitate cleaning of pellet combustion residue CLEAN GLASS air emission near the glass to prevent it from getting dirty GRILL The tank is equipped with a protective grid to prevent contact with the pellet loading mechanisms ASH COLLECTOR DRAWER drawer placed under the brazier to collect the ash produced by combustion SAFETY stove complete with temperature probes to monitor correct operation in safety FANS silence of the stove even at maximum working power PRESSURE SWITCH safety device that signals any obstructions in the smoke outlet KING 98 Designed to heat an 80m2 room, this pellet stove has among its outstanding features an advanced system of fume circulation around the combustion chamber which increases its maximum yield, bringing it to 92.7, this means that only 7.3% of the energy produced is dispersed outside. The compact design and the three colors make it easily adaptable to any environment. Suitable for those who want to heat medium-small sized rooms without neglecting energy savings. Characteristics: The King 10 Kw 9 pellet stove is able to increase thermal performance and efficiency with considerable savings on consumption costs, reaching a maximum efficiency of 92.70%. If 100% is the percentage of heat extrapolated from pellet combustion, 92.70% is the percentage of heat released into the environment, and only 8.3% is the percentage of heat from exhaust fumes. To obtain these results, careful planning was required, capable of extending the exchange surface inside the stove body, to extrapolate the maximum amount of heat from the fumes before they are pushed out of the fume extractor fan. The fumes leave the stove at a very low temperature of 149.5°C. Only after this scrupulous and compact construction does a stove become a KING stove. The stove is equipped with a multifunction remote control with an elegant design and LCD screen, a tube bundle heat exchanger to increase thermal performance and an easily removable brazier for daily cleaning. The size of the pipes has decreased to avoid turbulence and noise. The King pellet stove is designed with new electronics capable of predicting the weekly switch-on and switch-off schedules. Furthermore, in the combustion chamber there is a secondary convection to improve the combustion of the pellets. The combustion chamber features removable steel walls and a classic finish, to facilitate cleaning of pellet combustion residue. The emission of air takes place near the glass to avoid fouling. The tank is equipped with a grid so as to prevent contact with the pellet loading mechanisms. The stove is also equipped with temperature probes to monitor correct operation in safety, a pressure switch to signal any obstructions in the flue outlet and height-adjustable feet in scratch-resistant material. The fans are silent even at maximum working power and the dimensions are compact with the smallest possible footprint. The electric absorption at working regime corresponds to 100 W. The European Certifications certify the excellent thermal efficiency at the best consumption. All these features make the King 10 Kw 9 pellet stove an efficient, functional and excellent quality product.

Read more less

Technical features: heated m3 : 380 m3 Overall power (max-min): 3.8-16.3 kW Rated power (max-min): 3.7-15.2 kW Hourly pellet consumption (max-min): 0.8-3.4 kg/h Fumes exhaust duct: Ø 80 mm Pellet tank capacity: 23 Kg Dimensions (LxDxH) : 495x580x107 mm 5h autonomy Net weight: 105kg Color: burgundy Remote control: available as an accessory. General characteristics PELLET STOVES You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. Features of pellet stoves: BRAZIER the brazier is easily removable for daily cleaning ELECTRONICS new electronics capable of predicting the weekly switch-on and switch-off schedules REMOTE CONTROL New design multi-function remote control, with LCD screen HEAT EXCHANGER shell and tube heat exchanger to increase thermal performance. Pipe sizes are reduced to avoid turbulence and noise SECONDARY CONVECTION in the combustion chamber there is a secondary convection to improve the combustion of the pellets COMBUSTION CHAMBER removable steel walls to facilitate cleaning of pellet combustion residue CLEAN GLASS air emission near the glass to prevent it from getting dirty GRILL The tank is equipped with a protective grid to prevent contact with the pellet loading mechanisms ASH COLLECTOR DRAWER drawer placed under the brazier to collect the ash produced by combustion SAFETY stove complete with temperature probes to monitor correct operation in safety FANS silence of the stove even at maximum working power PRESSURE SWITCH safety device that signals any obstructions in the smoke outlet Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

PELLET STOVE KING 60 KW 6.15 BORDEAUX FOR ROOMS UP TO 55 M2 - NEW ( OPTIONAL REMOTE CONTROL ) Technical features m3 heated : 145 m3 Overall power (max-min): 6.15 - 2.7 kW Rated power (max-min): 5.53 - 2.5 kW Hourly pellet consumption (max-min): 1.34 - 0.57 Kg-h Efficiency (max-min): 93.34 - 90 % Fumes exhaust duct: Ø 80 mm Pellet tank capacity: 17 - 11 Liters / Kg Autonomy (max-min): 19 - 8 h Operating electrical power: 100 - 300 watts Dimensions (LxWxH): 430x430x765 mm Net weight: 45kg Color: burgundy Remote control: available as an accessory. PELLET STOVES  You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. Characteristics of pellet stoves: BRAZIER the brazier is easily removable for daily cleaning ELECTRONICS new electronics capable of predicting the weekly switch-on and switch-off schedules REMOTE CONTROL New design multi-function remote control, with LCD screen HEAT EXCHANGER shell and tube heat exchanger to increase thermal performance. Pipe sizes are reduced to avoid turbulence and noise SECONDARY CONVECTION in the combustion chamber there is a secondary convection to improve the combustion of the pellets COMBUSTION CHAMBER removable steel walls to facilitate cleaning of pellet combustion residue CLEAN GLASS air emission near the glass to prevent it from getting dirty GRILL The tank is equipped with a protective grid to prevent contact with the pellet loading mechanisms ASH COLLECTOR DRAWER drawer placed under the brazier to collect the ash produced by combustion SAFETY stove complete with temperature probes to monitor correct operation in safety FANS silence of the stove even at maximum working power PRESSURE SWITCH safety device that signals any obstructions in the smoke outlet KING 60 The smallest model in the range, a high-efficiency model suitable for heating rooms up to 55 m², ideal for small spaces or to help heat the house in order to obtain a reduction in the overall consumption of your home. Characteristics: The King 60 Kw pellet stove is able to increase thermal performance and efficiency with considerable savings on consumption costs, reaching a maximum efficiency of 92.70%. The stove is clad in steel , has a cast iron hearth, which can be easily removed for daily cleaning. The size of the pipes has decreased to avoid turbulence and noise. The King Kw 60 pellet stove is designed with new electronics capable of predicting the weekly switch-on and switch-off schedules . Furthermore, in the combustion chamber there is a secondary convection to improve the combustion of the pellets. The combustion chamber features removable steel walls and a classic finish, to facilitate cleaning of pellet combustion residue. The emission of air takes place near the glass to avoid fouling. The tank is equipped with a grid so as to prevent contact with the pellet loading mechanisms. The European Certifications certify the excellent thermal efficiency at the best consumption. All these features make the King 60 pellet stove an efficient, functional and excellent quality product.

Read more less

Technical features Overall power (max-min): 9.72 - 3.04 kW Rated power (max-min): 9.01 - 2.92 kW Hourly pellet consumption (max-min): 1.98 - 0.92 kg-h Efficiency (max-min): 95.93 - 92.66% Fumes exhaust duct: 80 ø mm Pellet tank capacity: 17 litres-kg Autonomy (max-min): 27.41 - 8.5 h Operating electric power: 100 - 300 W Dimensions (WxDxH): 935x249x935 mm Weight: 100kg General characteristics DUCTED PELLET STOVES The products called "ducted" can transport the heat to rooms adjacent to the room where the stove is installed, simply and without large installation costs. However, it is always important to evaluate the maximum ductable distance of the chosen product together with an expert, to guarantee the best use of the appliance and correct comfort in the rooms. Why Wood or Pellet? The need to use alternative energy sources arises spontaneously. Using wood is nothing more than the rediscovery of the primordial source of heating, focusing on a Renewable Energy. In fact, wood and pellets are among the renewable sources and the carbon dioxide (CO2) emitted for the production of energy does not increase that present in the environment, but is the same that the plants first absorbed to develop and which would into the atmosphere through the normal decomposition processes of wood at the end of their life cycle. The use of wood and pellets therefore puts carbon dioxide C02 into the atmosphere making it available again to plants which will absorb it through the process of chlorophyll photosynthesis. The thermal energy produced from wood or pellets is an intelligent eco-sustainable and at the same time economic alternative if compared to fossil fuels since the purchase price is 50/60% lower. Absolute convenience using wood or pellets. Those who heat with wood become independent of traditional energy sources and the supply of wood is always guaranteed. Heating with wood means heating following the natural cycle of CO2 (carbon dioxide). During combustion, the wood is released into the atmosphere a quantity of CO2 equal to that which a tree would develop after being felled, in the decomposition phase; the same amount that a healthy shrub could absorb anyway. For this reason, the use of energy obtainable from wood is to be considered neutral from the point of view of CO2 emissions and does not contribute in the least to the increase in the greenhouse effect; on the contrary, for every liter of fuel replaced by wood, significant quantities of CO2 emissions are avoided. The use of wood and pellet stoves reduce costs while increasing the heat output. Features of pellet stoves: BRAZIER the brazier is easily removable for daily cleaning ELECTRONICS new electronics capable of predicting the weekly switch-on and switch-off schedules REMOTE CONTROL New design multi-function remote control, with LCD screen HEAT EXCHANGER shell and tube heat exchanger to increase thermal performance. Pipe sizes are reduced to avoid turbulence and noise SECONDARY CONVECTION in the combustion chamber there is a secondary convection to improve the combustion of the pellets COMBUSTION CHAMBER removable steel walls to facilitate cleaning of pellet combustion residue CLEAN GLASS air emission near the glass to prevent it from getting dirty GRILL The tank is equipped with a protective grid to prevent contact with the pellet loading mechanisms ASH COLLECTOR DRAWER drawer placed under the brazier to collect the ash produced by combustion SAFETY stove complete with temperature probes to monitor correct operation in safety FANS silence of the stove even at maximum working power PRESSURE SWITCH safety device that signals any obstructions in the smoke outlet.

Read more less

Technical features Overall power (max-min): 19.6 - 5.4 kW Rated power (max-min): 18.46 - 5.1 kW Power delivered to water (max-min): 15.05 - 3.9 kW Power delivered to the environment (max-min): 3.41 - 1.2 kW Hourly pellet consumption (max-min): 4 - 1.08 kg-h Efficiency (max-min): 95.4 - 94.2% Fumes exhaust duct: 80 ø mm Pellet tank capacity: 64.6 - 42 litres-kg Autonomy (max-min): 39 - 10.5 h Operating electric power: 140 - 350 W Dimensions (WxDxH): 611x671x1266 mm Weight: 230kg With remote control and room fan General characteristics PELLET THERMOSTOVES The wood or pellet thermo-products make use of technologically advanced design solutions which allow the thermal power of the fire to be exploited both to heat the room and to produce hot water which feeds the traditional radiator system of the whole house. This double use makes the thermo-products unique in their kind and allows an optimal thermal yield and considerable savings. The thermo-products are particular devices designed for connection to the home heating system (for example the radiators or the underfloor system), they can be easily integrated into the existing boiler or to a solar thermal system for the production of domestic hot water . The choice of the appliance to be installed must be made according to specific individual needs, thus evaluating the overall thermal power required and the method with which the thermo-stove will be connected to the system. Why Wood or Pellet? The need to use alternative energy sources arises spontaneously. Using wood is nothing more than the rediscovery of the primordial source of heating, focusing on a Renewable Energy. In fact, wood and pellets are among the renewable sources and the carbon dioxide (CO2) emitted for the production of energy does not increase that present in the environment, but is the same that the plants first absorbed to develop and which would into the atmosphere through the normal decomposition processes of wood at the end of their life cycle. The use of wood and pellets therefore puts carbon dioxide C02 into the atmosphere making it available again to plants which will absorb it through the process of chlorophyll photosynthesis. The thermal energy produced from wood or pellets is an intelligent eco-sustainable and at the same time economic alternative if compared to fossil fuels since the purchase price is 50/60% lower. Absolute convenience using wood or pellets. Those who heat with wood become independent of traditional energy sources and the supply of wood is always guaranteed. Heating with wood means heating following the natural cycle of CO2 (carbon dioxide). During combustion, the wood is released into the atmosphere a quantity of CO2 equal to that which a tree would develop after being felled, in the decomposition phase; the same amount that a healthy shrub could absorb anyway. For this reason, the use of energy obtainable from wood is to be considered neutral from the point of view of CO2 emissions and does not contribute in the least to the increase in the greenhouse effect; on the contrary, for every liter of fuel replaced by wood, significant quantities of CO2 emissions are avoided. The use of wood and pellet stoves reduce costs while increasing the heat output. Features of pellet stoves: BRAZIER the brazier is easily removable for daily cleaning ELECTRONICS new electronics capable of predicting the weekly switch-on and switch-off schedules REMOTE CONTROL New design multi-function remote control, with LCD screen HEAT EXCHANGER shell and tube heat exchanger to increase thermal performance. Pipe sizes are reduced to avoid turbulence and noise SECONDARY CONVECTION in the combustion chamber there is a secondary convection to improve the combustion of the pellets COMBUSTION CHAMBER removable steel walls to facilitate cleaning of pellet combustion residue CLEAN GLASS air emission near the glass to prevent it from getting dirty GRILL The tank is equipped with a protective grid to prevent contact with the pellet loading mechanisms ASH COLLECTOR DRAWER drawer placed under the brazier to collect the ash produced by combustion SAFETY stove complete with temperature probes to monitor correct operation in safety FANS silence of the stove even at maximum working power PRESSURE SWITCH safety device that signals any obstructions in the smoke outlet

Read more less

Technical features Overall power (max-min): 23.6 - 5.4 kW Rated power (max-min): 22.14 - 5.1 kW Power delivered to water (max-min): 18.1 - 3.9 kW Power delivered to the environment (max-min): 3.8 - 1.8 kW Hourly pellet consumption (max-min): 4.04 - 1.2 kg-h Efficiency (max-min): 95.4 - 93.8% Fumes exhaust duct: 80 ø mm Pellet tank capacity: 64.6 - 42 litres-kg Autonomy (max-min): 39 - 9 h Operating electric power: 140 - 350 W Dimensions (WxDxH): 611x671x1266 mm Weight: 230kg With remote control and room fan General characteristics PELLET THERMOSTOVES The wood or pellet thermo-products make use of technologically advanced design solutions which allow the thermal power of the fire to be exploited both to heat the room and to produce hot water which feeds the traditional radiator system of the whole house. This double use makes the thermo-products unique in their kind and allows an optimal thermal yield and considerable savings. The thermo-products are particular devices designed for connection to the home heating system (for example the radiators or the underfloor system), they can be easily integrated into the existing boiler or to a solar thermal system for the production of domestic hot water . The choice of the appliance to be installed must be made according to specific individual needs, thus evaluating the overall thermal power required and the method with which the thermo-stove will be connected to the system. Why Wood or Pellet? The need to use alternative energy sources arises spontaneously. Using wood is nothing more than the rediscovery of the primordial source of heating, focusing on a Renewable Energy. In fact, wood and pellets are among the renewable sources and the carbon dioxide (CO2) emitted for the production of energy does not increase that present in the environment, but is the same that the plants first absorbed to develop and which would into the atmosphere through the normal decomposition processes of wood at the end of their life cycle. The use of wood and pellets therefore puts carbon dioxide C02 into the atmosphere making it available again to plants which will absorb it through the process of chlorophyll photosynthesis. The thermal energy produced from wood or pellets is an intelligent eco-sustainable and at the same time economic alternative if compared to fossil fuels since the purchase price is 50/60% lower. Absolute convenience using wood or pellets. Those who heat with wood become independent of traditional energy sources and the supply of wood is always guaranteed. Heating with wood means heating following the natural cycle of CO2 (carbon dioxide). During combustion, the wood is released into the atmosphere a quantity of CO2 equal to that which a tree would develop after being felled, in the decomposition phase; the same amount that a healthy shrub could absorb anyway. For this reason, the use of energy obtainable from wood is to be considered neutral from the point of view of CO2 emissions and does not contribute in the least to the increase in the greenhouse effect; on the contrary, for every liter of fuel replaced by wood, significant quantities of CO2 emissions are avoided. The use of wood and pellet stoves reduce costs while increasing the heat output. Features of pellet stoves: BRAZIER the brazier is easily removable for daily cleaning ELECTRONICS new electronics capable of predicting the weekly switch-on and switch-off schedules REMOTE CONTROL New design multi-function remote control, with LCD screen HEAT EXCHANGER shell and tube heat exchanger to increase thermal performance. Pipe sizes are reduced to avoid turbulence and noise SECONDARY CONVECTION in the combustion chamber there is a secondary convection to improve the combustion of the pellets COMBUSTION CHAMBER removable steel walls to facilitate cleaning of pellet combustion residue CLEAN GLASS air emission near the glass to prevent it from getting dirty GRILL The tank is equipped with a protective grid to prevent contact with the pellet loading mechanisms ASH COLLECTOR DRAWER drawer placed under the brazier to collect the ash produced by combustion SAFETY stove complete with temperature probes to monitor correct operation in safety FANS silence of the stove even at maximum working power PRESSURE SWITCH safety device that signals any obstructions in the smoke outlet

Read more less

Pellet stove King 5 Mini 4.9 kW Bordeaux Wi-Fi Optional high efficiency - NEW cod. 99175 Technical features Overall power (max - min) 4.9 - 2.3 kW Rated power (max - min) 4.4 - 2.1 kW Hourly pellet consumption (max - min) 1 - 0.49 kg-h Efficiency (max - min) 92.32 - 89.63 % Flue outlet ø mm 80 Pellet tank capacity l - kg 17 - 11 Autonomy (max - min) h 22 - 11 Operating electric power W 75 - 315 Heatable volume 135 m3 Dimensions (L x D x H) 470 - 277 - 880 mm ; 45kg Remote control PELLET STOVES Why Wood or Pellet? The need to use alternative energy sources arises spontaneously. Using wood is nothing more than the rediscovery of the primordial source of heating, focusing on a Renewable Energy. In fact, wood and pellets are among the renewable sources and the carbon dioxide (CO2) emitted for the production of energy does not increase that present in the environment, but is the same that the plants first absorbed to develop and which would into the atmosphere through the normal decomposition processes of wood at the end of their life cycle. The use of wood and pellets therefore puts carbon dioxide C02 into the atmosphere making it available again to plants which will absorb it through the process of chlorophyll photosynthesis. The thermal energy produced from wood or pellets is an intelligent eco-sustainable and at the same time economic alternative if compared to fossil fuels since the purchase price is 50/60% lower. Absolute convenience using wood or pellets. Those who heat with wood become independent of traditional energy sources and the supply of wood is always guaranteed. Heating with wood means heating following the natural cycle of CO2 (carbon dioxide). During combustion, the wood is released into the atmosphere a quantity of CO2 equal to that which a tree would develop after being felled, in the decomposition phase; the same amount that a healthy shrub could absorb anyway. For this reason, the use of energy obtainable from wood is to be considered neutral from the point of view of CO2 emissions and does not contribute in the least to the increase in the greenhouse effect; on the contrary, for every liter of fuel replaced by wood, significant quantities of CO2 emissions are avoided. The use of wood and pellet stoves reduce costs while increasing the heat output. KING 5 Minis Steel cladding Top ventilation Removable hearth Safety thermostat Weekly chronothermostat Remote control Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features m3 heated : 145 m3 Overall power (max-min): 6.15 - 2.7 kW Rated power (max-min): 5.53 - 2.5 kW Hourly pellet consumption (max-min): 1.34 - 0.57 Kg-h Efficiency (max-min): 93.34 - 90 % Fumes exhaust duct: Ø 80 mm Pellet tank capacity: 17 - 11 Liters / Kg Autonomy (max-min): 19 - 8 h Operating electrical power: 100 - 300 watts Dimensions (LxWxH): 430x430x765 mm Net weight: 45kg Color: White Remote control: available as an accessory. PELLET STOVES You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. Features of pellet stoves: BRAZIER the brazier is easily removable for daily cleaning ELECTRONICS new electronics capable of predicting the weekly switch-on and switch-off schedules REMOTE CONTROL New design multi-function remote control, with LCD screen HEAT EXCHANGER shell and tube heat exchanger to increase thermal performance. Pipe sizes are reduced to avoid turbulence and noise SECONDARY CONVECTION in the combustion chamber there is a secondary convection to improve the combustion of the pellets COMBUSTION CHAMBER removable steel walls to facilitate cleaning of pellet combustion residue CLEAN GLASS air emission near the glass to prevent it from getting dirty GRILL The tank is equipped with a protective grid to prevent contact with the pellet loading mechanisms ASH COLLECTOR DRAWER drawer placed under the brazier to collect the ash produced by combustion SAFETY stove complete with temperature probes to monitor correct operation in safety FANS silence of the stove even at maximum working power PRESSURE SWITCH safety device that signals any obstructions in the smoke outlet KING 60 The smallest model in the range, a high-efficiency model suitable for heating rooms up to 55 m², ideal for small spaces or to help heat the house in order to obtain a reduction in the overall consumption of your home. Characteristics: The King 60 Kw pellet stove is able to increase thermal performance and efficiency with considerable savings on consumption costs, reaching a maximum efficiency of 92.70%. The stove is clad in steel , has a cast iron hearth, which can be easily removed for daily cleaning. The size of the pipes has decreased to avoid turbulence and noise. The King Kw 60 pellet stove is designed with new electronics capable of predicting the weekly switch-on and switch-off schedules . Furthermore, in the combustion chamber there is a secondary convection to improve the combustion of the pellets. The combustion chamber features removable steel walls and a classic finish, to facilitate cleaning of pellet combustion residue. The emission of air takes place near the glass to avoid fouling. The tank is equipped with a grid so as to prevent contact with the pellet loading mechanisms. The European Certifications certify the excellent thermal efficiency at the best consumption. All these features make the King 60 pellet stove an efficient, functional and excellent quality product.

Read more less

Pellet Stove King 5 Mini 4.9 kW Black Wi-Fi Optional high efficiency - NEW cod. 99176 Technical features Overall power (max - min) 4.9 - 2.3 kW Rated power (max - min) 4.4 - 2.1 kW Hourly pellet consumption (max - min) 1 - 0.49 kg-h Efficiency (max - min) 92.32 - 89.63 % Flue outlet ø mm 80 Pellet tank capacity l - kg 17 - 11 Autonomy (max - min) h 22 - 11 Operating electric power W 75 - 315 Heatable volume 135 m3 Dimensions (L x D x H) 470 - 277 - 880 mm ; 45kg Remote control PELLET STOVES Why Wood or Pellet? The need to use alternative energy sources arises spontaneously. Using wood is nothing more than the rediscovery of the primordial source of heating, focusing on a Renewable Energy. In fact, wood and pellets are among the renewable sources and the carbon dioxide (CO2) emitted for the production of energy does not increase that present in the environment, but is the same that the plants first absorbed to develop and which would into the atmosphere through the normal decomposition processes of wood at the end of their life cycle. The use of wood and pellets therefore puts carbon dioxide C02 into the atmosphere making it available again to plants which will absorb it through the process of chlorophyll photosynthesis. The thermal energy produced from wood or pellets is an intelligent eco-sustainable and at the same time economic alternative if compared to fossil fuels since the purchase price is 50/60% lower. Absolute convenience using wood or pellets. Those who heat with wood become independent of traditional energy sources and the supply of wood is always guaranteed. Heating with wood means heating following the natural cycle of CO2 (carbon dioxide). During combustion, the wood is released into the atmosphere a quantity of CO2 equal to that which a tree would develop after being felled, in the decomposition phase; the same amount that a healthy shrub could absorb anyway. For this reason, the use of energy obtainable from wood is to be considered neutral from the point of view of CO2 emissions and does not contribute in the least to the increase in the greenhouse effect; on the contrary, for every liter of fuel replaced by wood, significant quantities of CO2 emissions are avoided. The use of wood and pellet stoves reduce costs while increasing the heat output. KING 5 Minis Steel cladding Top ventilation Removable hearth Safety thermostat Weekly chronothermostat Remote control Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Overall power (max-min): 16.1 - 4.1 kW Rated power (max-min): 15.0 - 4.0 kW Power delivered to water (max - min): 12.7 - 2.8 kW Power delivered to the environment (max - min): 2.3 - 1.2 kW Hourly pellet consumption (max-min): 0.8 - 3.4 kg-h Heatable volume: 320 m3 Efficiency (max-min): 96.5 - 93.56% Fumes exhaust duct: 80 ø mm Pellet tank capacity: 29 - 19 litres-kg Autonomy (max-min): 20 - 6 h Operating electric power: 140 - 350 W Dimensions (LxWxH): 1100 x 250 x 1000 mm Weight: 120kg General characteristics PELLET STOVES   Why Wood or Pellet? The need to use alternative energy sources arises spontaneously. Using wood is nothing more than the rediscovery of the primordial source of heating, focusing on a Renewable Energy. In fact, wood and pellets are among the renewable sources and the carbon dioxide (CO2) emitted for the production of energy does not increase that present in the environment, but is the same that the plants first absorbed to develop and which would into the atmosphere through the normal decomposition processes of wood at the end of their life cycle. The use of wood and pellets therefore puts carbon dioxide C02 into the atmosphere making it available again to plants which will absorb it through the process of chlorophyll photosynthesis. The thermal energy produced from wood or pellets is an intelligent eco-sustainable and at the same time economic alternative if compared to fossil fuels since the purchase price is 50/60% lower. Absolute convenience using wood or pellets. Those who heat with wood become independent of traditional energy sources and the supply of wood is always guaranteed. Heating with wood means heating following the natural cycle of CO2 (carbon dioxide). During combustion, the wood is released into the atmosphere a quantity of CO2 equal to that which a tree would develop after being felled, in the decomposition phase; the same amount that a healthy shrub could absorb anyway. For this reason, the use of energy obtainable from wood is to be considered neutral from the point of view of CO2 emissions and does not contribute in the least to the increase in the greenhouse effect; on the contrary, for every liter of fuel replaced by wood, significant quantities of CO2 emissions are avoided. The use of wood and pellet stoves reduce costs while increasing the heat output. KING IDRO SLIM 16   Steel cladding, majolica top Frontal radiation Ash drawer Heat exchanger with manual cleaning system Safety thermostat Internal thermostat Arrangement for external thermostat Weekly chronothermostat Remote control Circulation pump Expansion tank 3 bar safety valve Automatic air vent valve

Read more less

Technical features Overall power (max-min): 19.6 - 5.4 kW Rated power (max-min): 18.46 - 5.1 kW Power delivered to water (max-min): 15.05 - 3.9 kW Power delivered to the environment (max-min): 3.41 - 1.2 kW Hourly pellet consumption (max-min): 4 - 1.08 kg-h Efficiency (max-min): 95.4 - 94.2% Fumes exhaust duct: 80 ø mm Pellet tank capacity: 64.6 - 42 litres-kg Autonomy (max-min): 39 - 10.5 h Operating electric power: 140 - 350 W Dimensions (WxDxH): 611x671x1266 mm Weight: 230kg With remote control and room fan General characteristics PELLET THERMOSTOVES The wood or pellet thermo-products make use of technologically advanced design solutions which allow the thermal power of the fire to be exploited both to heat the room and to produce hot water which feeds the traditional radiator system of the whole house. This double use makes the thermo-products unique in their kind and allows an optimal thermal yield and considerable savings. The thermo-products are particular devices designed for connection to the home heating system (for example the radiators or the underfloor system), they can be easily integrated into the existing boiler or to a solar thermal system for the production of domestic hot water . The choice of the appliance to be installed must be made according to specific individual needs, thus evaluating the overall thermal power required and the method with which the thermo-stove will be connected to the system. Why Wood or Pellet? The need to use alternative energy sources arises spontaneously. Using wood is nothing more than the rediscovery of the primordial source of heating, focusing on a Renewable Energy. In fact, wood and pellets are among the renewable sources and the carbon dioxide (CO2) emitted for the production of energy does not increase that present in the environment, but is the same that the plants first absorbed to develop and which would into the atmosphere through the normal decomposition processes of wood at the end of their life cycle. The use of wood and pellets therefore puts carbon dioxide C02 into the atmosphere making it available again to plants which will absorb it through the process of chlorophyll photosynthesis. The thermal energy produced from wood or pellets is an intelligent eco-sustainable and at the same time economic alternative if compared to fossil fuels since the purchase price is 50/60% lower. Absolute convenience using wood or pellets. Those who heat with wood become independent of traditional energy sources and the supply of wood is always guaranteed. Heating with wood means heating following the natural cycle of CO2 (carbon dioxide). During combustion, the wood is released into the atmosphere a quantity of CO2 equal to that which a tree would develop after being felled, in the decomposition phase; the same amount that a healthy shrub could absorb anyway. For this reason, the use of energy obtainable from wood is to be considered neutral from the point of view of CO2 emissions and does not contribute in the least to the increase in the greenhouse effect; on the contrary, for every liter of fuel replaced by wood, significant quantities of CO2 emissions are avoided. The use of wood and pellet stoves reduce costs while increasing the heat output. Features of pellet stoves: BRAZIER the brazier is easily removable for daily cleaning ELECTRONICS new electronics capable of predicting the weekly switch-on and switch-off schedules REMOTE CONTROL New design multi-function remote control, with LCD screen HEAT EXCHANGER shell and tube heat exchanger to increase thermal performance. Pipe sizes are reduced to avoid turbulence and noise SECONDARY CONVECTION in the combustion chamber there is a secondary convection to improve the combustion of the pellets COMBUSTION CHAMBER removable steel walls to facilitate cleaning of pellet combustion residue CLEAN GLASS air emission near the glass to prevent it from getting dirty GRILL The tank is equipped with a protective grid to prevent contact with the pellet loading mechanisms ASH COLLECTOR DRAWER drawer placed under the brazier to collect the ash produced by combustion SAFETY stove complete with temperature probes to monitor correct operation in safety FANS silence of the stove even at maximum working power PRESSURE SWITCH safety device that signals any obstructions in the smoke outlet

Read more less