A 10% DEPOSIT IS REQUIRED FOR THE PURCHASES OF STOVES ON DELIVERY Technical features Dimensions : 703x1078x320 Net weight : 136 Kg Smoke outlet diameter: 80 mm Hearth : Cast iron heated m3 : 230 m3 Nominal thermal power useful : 2.4-8.0 kW Overall thermal power: 2.6-8.8 kW Efficiency : >90 % Hourly consumption: 0.6-1.8 kg/h Total tank capacity: ~14 kg Forced ventilation : Yes Remote control : Yes Internal thermostat : Yes Safety thermostat : Yes External thermostat preset: Yes Weekly chronothermostat : Yes To view further information on the product CLICK HERE General characteristics PELLET STOVES You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. The innovative LA NORDICA EXTRAFLAME pellet stoves have been added to the already traditional wood-burning stoves on the market. The control panel allows automatic ignition and the setting of the heating power, establishing the desired temperature thanks to the built-in room thermostat. ANNABELLA Coating in painted steel Forced ventilation Removable cast iron hearth Heat exchanger with manual cleaning system Safety thermostat Internal thermostat Arrangement for external thermostat (TA) Weekly chronothermostat Remote control Channeling up to 6 meters. and fumes discharge via 1 Ø80 rear, top or right side outlet This product is certified 4 stars according to the emissions and performance requirements of the Aria Pulita certification. To find out more, visit the dedicated page . Pellet stove technologies : AUTO CLEAN CHECK UP increases the efficiency of the combustion and the life of the parts subject to wear and, at the same time, decreases the ordinary cleaning of the brazier ROOM TEMPERATURE CONTROL the presence of the ambient probe optimizes comfort and leads to a significant reduction in consumption. CHRONO THERMOSTAT PROGRAM chronothermostat with temperature control divided into four daily bands, for optimal room management NETWORK SYSTEM system that allows, even when you are away from home, to interact with Extraflame devices via GPRS system or graphic display RESISTANT DOOR AT THE TIME the doors of the products made of high quality cast iron are unalterable over time and guarantee a constant seal DELAY STOP SYSTEM delayed shutdown of the stove KEYLOCK SYSTEM allows you to lock the display keypad to prevent improper or accidental use of the device (key lock) HARD RESET PROGRAM restoring the initial factory data in the event of a programming error AUTO RE-START the appliance switches back on automatically following a power blackout, after having carried out the foreseen cycle of checks ELECTRONIC AIR CONTROL primary and secondary air electronically balanced for optimal combustion and thermal efficiency CLEAN GLASS CONTROL It is a system which effectively avoids the formation of deposits on the glass of the fire door through a specific path of preheated air RATE ADJUSTMENT PROGRAM in two simple steps we can adjust the strength of the ventilation and, where present, of the ducting PELLETS LEVEL CONTROL adjusts the quantity of pellets to be introduced into the combustion chamber TEMPERATURE CONTROL INTERFACE the product interfaces with the home temperature control devices (thermostats and contacts) to obtain the desired temperature in the rooms Characteristics: Control panel : allows automatic ignition and setting of the heating power, establishing the desired temperature thanks to the built-in room thermostat. There is also the possibility of setting 2 different temperatures in 2 different time slots, one for the day and one for the night. The programmer inserted in the stove allows the user to set 3 ignitions and 3 shutdowns per day, weekly. Extraction system: In order to easily access the parts of the insert that need maintenance or cleaning, a convenient extraction system has been created using a sliding guide. Pellet loading can be done through a flap on the side or on the front of the fireplace. Installation: Requiring only one pipe to discharge the fumes, the stoves are easy to install. Possibly, in rooms where sufficient air recycling is not guaranteed, it is advisable to use the air intake pipe connection directly from the outside. The front grille ensures optimal diffusion of the hot air which, by means of a tangential fan, allows for fast and effective distribution. Diet: Thanks to the convenient access to the upper tank, loading the pellets is an easy operation. All the stoves allow a great operating autonomy. Hearth and Cleaning: The firebox has a cast iron structure in order to withstand the highest temperatures. In all stoves, the hearth is extractable which collects the ashes from combustion. Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features m3 heated : 145 m3 Overall power (max-min): 6.15 - 2.7 kW Rated power (max-min): 5.53 - 2.5 kW Hourly pellet consumption (max-min): 1.34 - 0.57 Kg-h Efficiency (max-min): 93.34 - 90 % Fumes exhaust duct: Ø 80 mm Pellet tank capacity: 17 - 11 Liters / Kg Autonomy (max-min): 19 - 8 h Operating electrical power: 100 - 300 watts Dimensions (LxWxH): 430x430x765 mm Net weight: 45kg Color: White Remote control: available as an accessory. PELLET STOVES You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. Features of pellet stoves: BRAZIER the brazier is easily removable for daily cleaning ELECTRONICS new electronics capable of predicting the weekly switch-on and switch-off schedules REMOTE CONTROL New design multi-function remote control, with LCD screen HEAT EXCHANGER shell and tube heat exchanger to increase thermal performance. Pipe sizes are reduced to avoid turbulence and noise SECONDARY CONVECTION in the combustion chamber there is a secondary convection to improve the combustion of the pellets COMBUSTION CHAMBER removable steel walls to facilitate cleaning of pellet combustion residue CLEAN GLASS air emission near the glass to prevent it from getting dirty GRILL The tank is equipped with a protective grid to prevent contact with the pellet loading mechanisms ASH COLLECTOR DRAWER drawer placed under the brazier to collect the ash produced by combustion SAFETY stove complete with temperature probes to monitor correct operation in safety FANS silence of the stove even at maximum working power PRESSURE SWITCH safety device that signals any obstructions in the smoke outlet KING 60 The smallest model in the range, a high-efficiency model suitable for heating rooms up to 55 m², ideal for small spaces or to help heat the house in order to obtain a reduction in the overall consumption of your home. Characteristics: The King 60 Kw pellet stove is able to increase thermal performance and efficiency with considerable savings on consumption costs, reaching a maximum efficiency of 92.70%. The stove is clad in steel , has a cast iron hearth, which can be easily removed for daily cleaning. The size of the pipes has decreased to avoid turbulence and noise. The King Kw 60 pellet stove is designed with new electronics capable of predicting the weekly switch-on and switch-off schedules . Furthermore, in the combustion chamber there is a secondary convection to improve the combustion of the pellets. The combustion chamber features removable steel walls and a classic finish, to facilitate cleaning of pellet combustion residue. The emission of air takes place near the glass to avoid fouling. The tank is equipped with a grid so as to prevent contact with the pellet loading mechanisms. The European Certifications certify the excellent thermal efficiency at the best consumption. All these features make the King 60 pellet stove an efficient, functional and excellent quality product.

Read more less

Technical features Hourly consumption 1.3 - 4.3 Kg/h Smoke outlet diameter 100 mm Dimensions (LHP) 821x648x608 mm Net weight 220 kg Efficiency >90 % Total tank capacity 18 kg Energy class A+ Environmental Certification DM186 4 STARS General characteristics PELLET INSERTS The “Comfort” Inserts: The optimal solution to integrate into an existing or newly installed fireplace. Easy to take out and load. Extraflame: heats the environment in harmony with nature HYDRO COMFORT L80 Thermo Pellet insert Heat exchanger with automatic cleaning system Fire door safety pressure switch Removable ash compartment Control with multifunction "handheld". New electronics with the possibility of connecting the system expansion card Ceramic glow plug with latest generation ignition system Forced ventilation (completely excludable) Circulator with PWM control directly from PDA Pellet level sensor Arrangement for external thermostat (TA) Expansion tank 3 bar safety valve Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Pellet Stove King 5 Mini 4.9 kW Black Wi-Fi Optional high efficiency - NEW cod. 99176 Technical features Overall power (max - min) 4.9 - 2.3 kW Rated power (max - min) 4.4 - 2.1 kW Hourly pellet consumption (max - min) 1 - 0.49 kg-h Efficiency (max - min) 92.32 - 89.63 % Flue outlet ø mm 80 Pellet tank capacity l - kg 17 - 11 Autonomy (max - min) h 22 - 11 Operating electric power W 75 - 315 Heatable volume 135 m3 Dimensions (L x D x H) 470 - 277 - 880 mm ; 45kg Remote control PELLET STOVES Why Wood or Pellet? The need to use alternative energy sources arises spontaneously. Using wood is nothing more than the rediscovery of the primordial source of heating, focusing on a Renewable Energy. In fact, wood and pellets are among the renewable sources and the carbon dioxide (CO2) emitted for the production of energy does not increase that present in the environment, but is the same that the plants first absorbed to develop and which would into the atmosphere through the normal decomposition processes of wood at the end of their life cycle. The use of wood and pellets therefore puts carbon dioxide C02 into the atmosphere making it available again to plants which will absorb it through the process of chlorophyll photosynthesis. The thermal energy produced from wood or pellets is an intelligent eco-sustainable and at the same time economic alternative if compared to fossil fuels since the purchase price is 50/60% lower. Absolute convenience using wood or pellets. Those who heat with wood become independent of traditional energy sources and the supply of wood is always guaranteed. Heating with wood means heating following the natural cycle of CO2 (carbon dioxide). During combustion, the wood is released into the atmosphere a quantity of CO2 equal to that which a tree would develop after being felled, in the decomposition phase; the same amount that a healthy shrub could absorb anyway. For this reason, the use of energy obtainable from wood is to be considered neutral from the point of view of CO2 emissions and does not contribute in the least to the increase in the greenhouse effect; on the contrary, for every liter of fuel replaced by wood, significant quantities of CO2 emissions are avoided. The use of wood and pellet stoves reduce costs while increasing the heat output. KING 5 Minis Steel cladding Top ventilation Removable hearth Safety thermostat Weekly chronothermostat Remote control Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Note well! In the absence of immediate availability, the product will be ordered and shipped within 10 working days. In order to purchase the product on delivery, a 10% deposit must be paid. Technical features Model : Serafina Nominal Thermal Power: 2.4 - 7.1 kW 203 m 3 Heatable Color : Bordeaux Efficiency : 87 % Hourly consumption : 06-1.7 Kg/h Smoke outlet diameter: Ø 80 mm Total tank capacity ~ 15 kg Energy Class: A + DM186 Environmental Certification: 4 STARS Optional remote control Dimensions and weight : Dimensions (LxHxP): 502x1037x530 mm Net Weight : 106 kg SERAFINA Ventilated pellet stove with majolica cladding • Majolica cladding • Forced ventilation • Ash drawer • Removable cast iron hearth • Safety thermostat • Internal thermostat • Weekly programmer • Possibility of connecting the rear or upper smoke outlet Clean Air, the new culture of fire The La Nordica-Extraflame group has joined the Aria Pulita voluntary certification , the new quality certification for wood and pellet-fired domestic heating products This project calls for a Certification Committee made up of ENEA, LEGA AMBIENTE, NATIONAL CONSUMERS UNION coordinated by AIEL, the Italian Agroforestry Energies Association. The indication provided, very simple and intuitive thanks to the use of an increasing classification from 1 to 5 stars based on the performance of the products in terms of greater efficiency and lower emissions, will allow each user to recognize the qualities of the stove he buys in the full compliance with the most restrictive technical parameters and indications on emissions into the environment. Aria Pulita is therefore not a mere response to the temporary contingencies of exceeding the emission limits in a limited period of the year in a specific area or region, but it is a concrete guarantee for consumers throughout Italy that certified products contribute to improving air quality, health and the environment based on the cornerstones of transparency, objectivity and clarity. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

General characteristics Brand: Hydrobox Code: 128101 EAN: 8054602000458 Model: HB30 Number of plates: 30 Number of pumps: 2 Data sheet Pumps: Wilo Para 15/6 SC AISI 316 stainless steel plate heat exchanger Module: L401 x H412 x D106mm External box: L406.5 x H500 x D115mm Built-in box: L461 x H532 x P101mm Connection Example Legend A: Return from the plant G¾” B: Delivery to the system G¾” C: G¾” thermoproduct inlet D: G¾” thermoproduct outlet S1: Probe for reference temperatures Description Module for the hydraulic separation of the heating circuit of the solid fuel generator (open or closed vessel) from other generators with closed vessel, to avoid adding the powers of the two generators as required by INAIL (ex ISPESL) standards. Standard module 28 kW/h with 30 plate heat exchanger Operation When the biomass thermo-product is turned on, the temperature rises inside the appliance until the fluid inside reaches a certain threshold. Once this temperature is reached, the thermostat installed on the thermo-product (or the control unit probe) opens the electrical contact and simultaneously carries out the following operations: • Start-up of the thermo-product circulator (HB30 and HB40 models only) and of the heating system circulator; • Shutdown of the auxiliary source (boiler) if in operation. Components The module consists of a sheet metal support for wall installation, a 30 or 40 plate heat exchanger, 2 vent valves, an electrical junction box, DN 20 mm copper pipes, a painted sheet metal cover, one or 2 circulators. Optional electronic control unit.

Read more less

A 10% DEPOSIT IS REQUIRED FOR CASH ON DELIVERY PAYMENTS ON THE STOVES Technical features Dimensions : 633x1176x624 mm Net weight : 215 Kg Smoke outlet diameter: 80 mm heated m3 : 540 m3 Power yield to liquid: 3.9–15.7 kW Ambient output power: 1.4–3.1 kW Nominal thermal power useful: 5.3–18.8 kW Overall thermal power: 5.5–20.5 kW Exchanger fluid content : 18.5 Operating pressure : 2.5 bar Efficiency : >91 % Hourly consumption: 1.2-4.2 Kg/h Total tank capacity: ~ 35 Kg Forced ventilation : Yes Remote control : Yes Safety thermostat : Yes External thermostat preset: Yes Power consumption: 90-110W Draft : ~10 Pa Pump and expansion tank : Yes Ext. air intake pipe : 50mm Weekly chronothermostat : Yes 3 bar safety valve : Yes *NB First ignition not compulsory for a fee, stoves already lit in the company! General characteristics PELLET THERMOSTOVES La Nordica-Extraflame wood-burning and pellet-burning thermoproducts make use of technologically advanced design solutions that allow you to heat your home in total respect for the environment with excellent heat output and low wood consumption. The thermo-products are particular devices designed for connection to the home heating system (for example the radiators or the underfloor system), they can be easily integrated into the existing boiler or to a solar thermal system for the production of domestic hot water . The choice of the appliance to be installed must be made according to specific individual needs, thus evaluating the overall thermal power required and the method with which the thermo-stove will be connected to the system. You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. The control panel allows automatic ignition and the setting of the heating power, establishing the desired temperature thanks to the built-in room thermostat. RAFFAELA IDRO Coating in painted steel Front ventilation with the possibility of exclusion Ash drawer Heat exchanger with manual cleaning system Safety thermostat Internal thermostat Arrangement for external thermostat (TA) Weekly chronothermostat Remote control Circulation pump Expansion tank 3 bar safety valve This product is certified 4 stars according to the emissions and performance requirements of the Aria Pulita certification. To find out more, visit the dedicated page . Pellet stove technologies: AUTO CLEAN CHECK UP increases the efficiency of the combustion and the life of the parts subject to wear and, at the same time, decreases the ordinary cleaning of the brazier ROOM TEMPERATURE CONTROL the presence of the ambient probe optimizes comfort and leads to a significant reduction in consumption. CHRONO THERMOSTAT PROGRAM chronothermostat with temperature control divided into four daily bands, for optimal room management NETWORK SYSTEM system that allows, even when you are away from home, to interact with Extraflame devices via GPRS system or graphic display RESISTANT DOOR AT THE TIME the doors of the products made of high quality cast iron are unalterable over time and guarantee a constant seal DIGITAL PRESSURE CONTROL system that allows any malfunctions relating to the hydraulic pressure to be displayed on the display DELAY STOP SYSTEM delayed shutdown of the stove KEYLOCK SYSTEM allows you to lock the display keypad to prevent improper or accidental use of the device (key lock) AUTO RE-START the appliance switches back on automatically following a power blackout, after having carried out the foreseen cycle of checks ELECTRONIC AIR CONTROL primary and secondary air electronically balanced for optimal combustion and thermal efficiency CLEAN GLASS CONTROL It is a system which effectively avoids the formation of deposits on the glass of the fire door through a specific path of preheated air PELLETS LEVEL CONTROL adjusts the quantity of pellets to be introduced into the combustion chamber TEMPERATURE CONTROL INTERFACE the product interfaces with the home temperature control devices (thermostats and contacts) to obtain the desired temperature in the rooms. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

A 10% DEPOSIT IS REQUIRED FOR CASH ON DELIVERY PAYMENTS ON THE STOVES Technical features Dimensions : L 525 x H 1054 x D 579 mm Net weight : 118 Kg Smoke outlet diameter: 80 mm heated m3 : 292 m3 Nominal thermal power useful : 3.0 - 10.2 kW Overall thermal power: 3.3 - 11.4 kW Efficiency : 90 % Hourly consumption : 0.7 - 2.3 kg/h Total tank capacity: ~18 kg Power consumption: 60-80W Draft : ~10 Pa Ext. air intake pipe : 50mm To view further information on the product CLICK HERE General characteristics PELLET STOVES You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. The innovative LA NORDICA EXTRAFLAME pellet stoves have been added to the already traditional wood-burning stoves on the market. The control panel allows automatic ignition and the setting of the heating power, establishing the desired temperature thanks to the built-in room thermostat. VIVIANA EVO Pellet stove with painted steel cladding and majolica top Forced ventilation Removable ash drawer Removable cast iron hearth Heat exchanger with manual cleaning system Safety thermostat Internal thermostat Weekly programmer. AUTO CLEAN CHECK UP increases the efficiency of the combustion and the life of the parts subject to wear and, at the same time, decreases the ordinary cleaning of the brazier ROOM TEMPERATURE CONTROL the presence of the ambient probe optimizes comfort and leads to a significant reduction in consumption. RESISTANT DOOR AT THE TIME the doors of the products made of high quality cast iron are unalterable over time and guarantee a constant seal HARD RESET PROGRAM Restoration of the initial factory preset data, in the event of a programming error. AUTO RE-START the appliance switches back on automatically following a power blackout, after having carried out the foreseen cycle of checks ELECTRONIC AIR CONTROL primary and secondary air electronically balanced for optimal combustion and thermal efficiency CLEAN GLASS CONTROL It is a system which effectively avoids the formation of deposits on the glass of the fire door through a specific path of preheated air PELLETS LEVEL CONTROL adjusts the quantity of pellets to be introduced into the combustion chamber

Read more less

Wood-burning fireplace NEW VULCANO 25 vertical retractable 3 exchangers with control unit included VOLCANO The Vulcano closed fireplace is a modern, efficient, functional, aesthetically pleasing product, with management suited to today's needs and capable of combining these factors with the history and tradition of a century-old product such as the fireplace. Structure The structure is made of thick steel. The walls are smooth and free from mechanisms. The secondary exchangers are made of copper and are placed in a bain-marie in the interspaces of the primary. The painting is made with epoxy powders suitable for high temperatures. Plant engineering The plant engineering capacities are completely similar to fossil fuel boilers: it can feed any type of heating system, with any type of piping, with any type of circuit: open, closed or mixed, it can work alone or in combination with other boilers. Heating The thermal performance is also similar to fossil fuel boilers. In fact, it can correctly heat homes up to 320 m2, in any climatic zone and any energy class they belong to. Hot water The hot water supply is superior to the best instantaneous boilers and its flow is constant. Furthermore, each model has an internal supply proportionate to its power which allows it to guarantee the supply for several hours even with the fire off. You consume The new models have even greater efficiency which allows them to consume about a third of the gas boilers and less than half of the pellet ones for the same amount of heat supplied. Management Charges of any size can be carried out, it does not need to be looked after, it can be used for cooking food or as a barbecue, the ash can be removed 1-2 times a week and the same goes for cleaning the glass. The smoke duct should be cleaned 1-2 times a year. Models Four models are produced, suitable for heating surfaces from 50 to 320 m2. The choice must be made according to the indications given in the table below. Installation The installation of Vulcano fireplace stoves is simple, fast, legal and within the reach of all installers. This is due to their ability to directly perform all the functions that may be required: heating, hot water, interface with other boilers, etc. Once the model suitable for your needs has been purchased, it can be connected directly: without boilers, exchangers and various kits. To give you a better idea, we report some drawings of the most common installations of the three series. The figures with boilers refer to when they already exist or are needed for other generators or for specific needs. Usage The use of the Vulcano closed fireplace is very simple: even simpler than the classic fireplace. In fact, once loaded it does not need anything else: there is no need to remove the wood, there is no need to operate levers or switches, there is no need to change the combustion air, etc. In practice, you can also leave the house as you would with a classic fireplace, being careful not to leave the door open or flammable materials in the immediate vicinity. It is advisable to keep the door closed also to have a greater yield but nothing prevents you from keeping it open for cooking food or using the fireplace stove as a barbecue without any risk of smoke or bad smells in the house. Charges can be made of any size without fear of boiling or other anomalies: autonomy is based on the charge. The ash can be removed once a week as this new series has an even larger compartment and produces even less. The glass can be cleaned from once a day to once a week depending on the humidity of the wood and the draft in the flue. The hydrothermal aspect is managed automatically directly by the control unit, therefore it is not necessary to activate switches and stop keys and neither is it necessary to make adjustments or manual interventions of any kind. From a safety point of view, once the closed fireplace has been installed according to the instructions given in the instruction manual, no dangerous situations can arise under any conditions (except those of a normal fireplace). Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Overall power (max-min): 16.1 - 4.1 kW Rated power (max-min): 15.0 - 4.0 kW Power delivered to water (max - min): 12.7 - 2.8 kW Power delivered to the environment (max - min): 2.3 - 1.2 kW Hourly pellet consumption (max-min): 0.8 - 3.4 kg-h Heatable volume: 320 m3 Efficiency (max-min): 96.5 - 93.56% Fumes exhaust duct: 80 ø mm Pellet tank capacity: 29 - 19 litres-kg Autonomy (max-min): 20 - 6 h Operating electric power: 140 - 350 W Dimensions (LxWxH): 1100 x 250 x 1000 mm Weight: 120kg General characteristics PELLET STOVES   Why Wood or Pellet? The need to use alternative energy sources arises spontaneously. Using wood is nothing more than the rediscovery of the primordial source of heating, focusing on a Renewable Energy. In fact, wood and pellets are among the renewable sources and the carbon dioxide (CO2) emitted for the production of energy does not increase that present in the environment, but is the same that the plants first absorbed to develop and which would into the atmosphere through the normal decomposition processes of wood at the end of their life cycle. The use of wood and pellets therefore puts carbon dioxide C02 into the atmosphere making it available again to plants which will absorb it through the process of chlorophyll photosynthesis. The thermal energy produced from wood or pellets is an intelligent eco-sustainable and at the same time economic alternative if compared to fossil fuels since the purchase price is 50/60% lower. Absolute convenience using wood or pellets. Those who heat with wood become independent of traditional energy sources and the supply of wood is always guaranteed. Heating with wood means heating following the natural cycle of CO2 (carbon dioxide). During combustion, the wood is released into the atmosphere a quantity of CO2 equal to that which a tree would develop after being felled, in the decomposition phase; the same amount that a healthy shrub could absorb anyway. For this reason, the use of energy obtainable from wood is to be considered neutral from the point of view of CO2 emissions and does not contribute in the least to the increase in the greenhouse effect; on the contrary, for every liter of fuel replaced by wood, significant quantities of CO2 emissions are avoided. The use of wood and pellet stoves reduce costs while increasing the heat output. KING IDRO SLIM 16   Steel cladding, majolica top Frontal radiation Ash drawer Heat exchanger with manual cleaning system Safety thermostat Internal thermostat Arrangement for external thermostat Weekly chronothermostat Remote control Circulation pump Expansion tank 3 bar safety valve Automatic air vent valve

Read more less

Natural gas stove SicarEco 40 Model ECO 40 natural gas. Max power 4200W. Can be installed on the wall or on the floor. Equipped with oxygen exhaustion sensor and anti-overturning safety switch. Heatable volume 110 m3. Dimensions cm 43x15x64H.

Read more less

Wood stove KIR 9/12 kW anthracite black steel Mod. FIME Thermal power 12.0 kW Heatable volume 220 m3 Global thermal power 16.0 kW Smoke outlet ø 13 cm Oven dimensions 36x37x23h cm Weight 113kg Dimensions cm 49x46x103h - High thickness steel structure - Combustion chamber FIME The Fime model represents a wood (and coal) stove produced in Europe and compliant with current regulations. The structure is made of thick steel, painted entirely with high quality Rembrandtin products, resistant to high temperatures. Ceramic glass is produced by Schott and resists over 1000 °C. The primary air control takes place through the wooden knob placed on the ash pan. The combustion chamber consists of a cast iron base plate (which can be removed for cleaning) and a perimeter surface in refractory brick. The stove has an efficient wood-burning oven, with indirect cooking, i.e. it works thanks to the smoke circulation and is equipped with a thermometer for temperature control. Product Guarantee All the products on sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less