Ferroli SKY ECO 17F Low NOx gas water heater complete with LPG fume kit - NEW ERP Class (Class G - A) A XL load profile Nominal heat input Max kW 32.9 Thermal power Max / Min kW 29.6 / 11.47 Maximum working pressure 10 bar Maximum DHW production Δt 25°C / Δt 30°C l/min 17.0 / 14.2 Power supply V/Hz 230 / 50 Dimensions HxL 595x375 mm New Ferroli ECO range EFFECTIVE The ECO range has been designed according to the stringent efficiency parameters of the European ErP Directive. In practice, they are able to produce a lot of hot water at a low cost, respecting the environment and with minimal polluting emissions. They can also be integrated into a solar thermal system with extreme simplicity for maximum efficiency and comfort. EASY ECO water heaters are extremely simple to install and are interchangeable with previous series. Although very compact in size, they have been designed and built in such a way as to have easy access to the internal components for easy maintenance. BEAUTIFUL AND SMART The designers of the ECO project have created a «friendly» aesthetic that can be easily integrated with the most diverse furnishing styles. The knob or button controls have been designed to be easy to use and immediately understood. All Ferroli gas water heaters are equipped with a user interface display. Sky ECO F Sealed chamber gas water heater, with modulating thermal power and electronic control of the. Combustion. LOW NOx fume emission and SUN EASY system for direct coupling to a solar thermal system SUN EASY Easy... Cheap... Brilliant The SKY ECO range has been designed to be easily integrated with thermal solar systems, with natural or forced circulation. The temperature of the water coming from the solar circuit is constantly monitored and the water heater burner is turned on only if it is not hot enough. To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. The heart of water heaters All ECO series water heaters comply with the very strict restrictions on the emission of fumes into the atmosphere, imposed by European regulations. The burners in the ECO range use a particular technology which consists in keeping the flame temperature very low, keeping the gas trains wet. This expedient makes it possible to go well below the limits imposed by the ErP directive which sets the NOx limit at the threshold of 56 mg/kWh. Copper exchanger Interface displays Continuous power modulation - Available for operation with Natural Gas, LPG and Propane Air (50% air - 50% G31 by means of a specific transformation to be requested from the authorized assistance center at the maximum total price of 30 euros + VAT) Solar installations Also outdoor installation in protected places Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

ATTENTION: The product is completely intact, but does not have the original packaging as it is damaged. Technical specifications Energy label specifications according to the European ErP directive Sanitary Energy Efficiency ACS: Class A Declared upload profile: XL Electricity consumption (kWh/year) and fuel (GJ/year) 8 - 18 Indoor noise levels (dB) 67 Characteristics of heating/DHW operation: Code: REU-VCM2837FFUD-LPG 2 - Forced flow sealed chamber water heaters Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulmax lt 1000 Fine series antifreeze -20C Installation: Internal - Villa - Apartment with multifunctional shower/whirlpool and professional installations Dimensions: mm 582x356x235 ; 20 Kgs Methane heat input Min/Max (kW) 2.8/53 Water flow t 25C Max (l/min) 28 Max operating temperature (C) 85 Minimum activation pressure (bar) 0.1 Nominal operating pressure Min/Max (bar) 2.5/10 Electric consumption normal / stand-by / antigel (W) 97 / 2 / 120 LPG version INFINITY The 17 litres/min Infinity 17i water heater is a domestic instantaneous water heater to be installed inside the home. It produces hot water only in response to a real request (only when the tap is opened). Unlike a kettle, it does not need to store large quantities of water at high temperatures. This allows for great savings in terms of energy costs and water consumption . No need to mix the water, which immediately comes out at the desired temperature. NEW The installer can select the "high altitude" setting to ensure maximum performance of the water heater even when installed in the high mountains, in rarefied air conditions NEW When the water heater and the utilities are distant and heat dispersions are generated, the installer can correct the temperature according to the degree of use (from +1°C to +3°C) by perfecting the temperature at the tap NEW A progressive alert signals any limescale deposits. This allows cleaning to be carried out before the level is such as to cause a malfunction. Instantaneous gas-fired domestic hot water producer for indoor installation. Equipped with a control panel on the dashboard for managing the temperature, the degree and self-diagnosis. Anti-corrosion enamelled galvanized steel casing. Like all Rinnai water heaters, the new Infinity control the temperature to the degree and optimize comfort in the name of energy savings Temperature refinement to degree at point of use When the water heater is far from the utilities and the pipes generate heat dispersion, it is possible to correct the temperature at the tap from +1°C to +3°C Are you a home user? Register your new water heater on rinnai.it in the appropriate section to extend the warranty of your water heater to 4 years free of charge* The warranty extension (valid only on spare parts) can be requested on domestic water heaters. Consult the technical manuals to find out the details of the initiative. AT OUR HOME WE ARE FREE TO BE OURSELVES Rinnai responds to the different needs of hot water. A product available in different sizes 14 or 17 litres/minute. A studio flat, an apartment, one or more people living together. Always, an appliance that takes up very little space and offers endless hot water, giving way to what matters most Characteristics Unlimited hot water without sudden changes in temperature Electronic ignition without pilot flame Temperature control to the degree via the series controller Flow regulator: constant temperature as the flow varies Integrated automatic reset as standard Progressive LC code that detects any limescale deposits Free warranty extension on rinnai.it Functions Can be combined with solar panels Can be combined with recirculation Can be combined with max storage tank lt 500 Max 3 additional remote controls High Altitude Function Ultrathin Standard antifreeze up to -15°C Perfect temperature despite dispersions** Eco friendly Product Guarantee: All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER CHAFFOTEAUX AVENIR PLUS SFT 16 EU LPG - COMPLETE WITH FUME EXHAUST KIT: AVENIR PLUS the gas water heater with 2 - Thermostatic Sealed Chamber Water Heaters guarantees total safety and maximum comfort for the user Technical specifications Product code: 3632173 Energy label specifications according to the European ErP directive Sanitary energy efficiency Class A Withdrawal profile: XL Description: Model: AVENIR PLUS SFT 16 EU Ignition: electronic flame ionization Type: gas instantaneous water heater with 2 - Sealed chamber water heaters Operating characteristics: Nominal heat input : 31 kW Nominal heat output: 28 kW LPG gas supply pressure: 28-30/37 mbar Consumption - LPG Gas Flow Rates/Hour: 2.4 m3/h Hydraulic characteristics: Minimum/maximum nominal pressure: 0.1/8.5 bar Minimum operating flow: 2 l/min Flow rate with salttermic(t 25C): 16 l/min electrical circuit: Maximum absorbed power: 49 kW Electrical protection type: IPX4D Power supply: LPG Main features Avenir Plus AVENIR PLUS the gas water heater with 2 thermostatic sealed chamber water heaters guarantees total safety and maximum comfort for the user. The innovative design and compact size simplify use, installation and maintenance. Sanitary comfort Thermostatic: High precision NTC probes to measure the temperature at the cold water inlet and at the hot water outlet. The temperature remains stable even in the presence of variations in the water flow rate. The solar kit with thermostatic valve allows you to connect Avenir Plus to solar systems An ecological solution to save energy. Temperature control via probe. Convenience of installation use Different powers to increase the hot water flow rate (11 and 16 l/min with !t 25, C). Pressure switch for fume control. Versatile: Works perfectly with low hydraulic pressures (0.1 bar). Compatible with solar systems for greater gas savings. 2 - Sealed chamber water heaters of maximum safety for unventilated spaces. Available in 11 and 16 liter versions, natural gas and butane gas. sanitary pressure switch. energy saving and environmentally friendly Final 25% gas consumption reduction thanks to electronic ignition and flame ionization. Additional savings in gas consumption by combining the water heater with our solar systems. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the eco-design directive (ErP notcome ,© Energy Related Products ,î) imposes a minimum energy efficiency for heating devices for the production of hot water in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows for comparisons on the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and kettles placed on the market from 26 September 2015. It's about me too YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label; technical product sheet; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold together with other additional devices; technical sheet of the system with the parts relating to the products and the system already compiled. Dealer Responsibility First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible; all appliances and/systems are always accompanied by the obligatory technical data sheets; any type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production must be equipped with the new energy label which will report the energy class and main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of appliance there are different labels. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also provided in cases where a series of combined appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Turbomag 17-2/0-5 Product code : 311425 Power supply: LPG Performance Nominal thermal power: 29.0 kW Reduced thermal power: 8.6 kW Nominal heat input: 32.9 kW Smoke temperature after draft break with Pn C 204 Smoke temperature after draft break with Pr C 137 Mass flow rate of fumes with Pn g/s 12.9 Mass flow rate of fumes with Pr g/s 8.9 CO 2 content in fumes with Pn : 6.9% Microaccumulator capacity: 3.2 litres Domestic hot water direct withdrawal range Δ T = 35 C l/min 2.2 - 12 Minimum pressure required for ignition: 0.2 bar Maximum temperature that can be set for domestic hot water: 63° C Minimum settable domestic hot water temperature C : 38° C Class of merit according to the European standard EN 13203: *** Maximum operating overpressure: 10.0 bar G20 methane gas consumption: 3.45 m 3 /h G30 liquid gas consumption: 2.59 kg/h Gas pressure upstream of the methane appliance: 20 mbar Gas pressure upstream of the LPG appliance (Butane/Propane): 30/37 mbar Power supply V/Hz 230/50 Total max absorbed electric power: 108 W Hot water fittings R 1/2" Inch Cold water fittings R 1/2" Inch Natural gas fittings R 1/2" Inch Liquid gas connection 12x1 mm Combustion gas/comburent air discharge connection 60/100 mm IP X4D degree of protection CE certification 1312BO3978 Dimensions and weight Dimensions (HxWxD): 742x410x370 mm Empty weight: 27.2 kg Vaillant TurboMAG water heater Quietness, Flexibility and Absolute Quality Vaillant turboMAG gas water heaters are the result of careful studies and careful planning. Each water heater is constantly monitored right from the assembly stage to ensure maximum reliability, great performance and always guarantee maximum comfort and significant energy savings. TurboMAG 17 with micro accumulator Water heater with micro storage and electronic ignition without pilot flame. Equipped with the Comfortronic system, turboMAG guarantees a constant temperature water supply for both large and small tappings. Just two knobs and a digital display make setting the temperature and viewing the operating parameters really easy. The most efficient sanitary comfort choice without installation limits Comfort ● High hot water production (up to 17 l/min) ● Hot water without sudden changes in temperature ● Hot water without waiting times thanks to micro storage savings ● High modulation ● Great reduction of gas consumption thanks to the flame self-modulation system ● Small size Safety ● Reliability of every single component tested by the Vaillant LabTest Simplicity ● New Touch Screen interface ● Quick replacement of previous models ● Wall drain Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Sealed Chamber Gas Water Heater Savio SAVINO HE 14S Low NOx Methane Complete with Smoke Exhaust Kit Water heater Plus 14S Nominal heat input (Hi) kW 28.0 Maximum water flow rate (increase at 25 °C) kg/min 14.0 Appliance type C 13-33 Maximum water pressure (Pw) bar 10 Minimum water pressure (Pw) bar 0.2 Power supply 230V ~ 50Hz IPX4 electrical protection degree Ignition method Automatic impulse ignition controlled directly from the water opening Destination countries IT G 1/2 gas inlet fitting G 1/2 cold water inlet fitting G 1/2 hot water outlet fitting Diameter of the flue gas exhaust pipe mm Ø 60 x Ø 100 ErP DATA XL load profile Energy efficiency of the water heating system (ηWH) % 84.0 Energy efficiency of water heating system A Daily gas consumption (corrected) kWh 23.583 Daily electricity consumption (corrected) kWh 0.064 Annual electricity consumption AEC (kWh) 14 NOx mg/kWh 29 Internal sound power level (LWA) dB 61 NOx class 6 Product code 10104.1009.0/0 (LPG)/ 10114.1009.0/0 (MET) SAVINO Low NOx emission gas wall mounted water heater Available in 12 kW, 14 kW and 16 kW versions with very compact dimensions Energy saving This product features advanced technologies called Strengthened Combustion and Forced Combustion. These two patents make it possible to make the best use of thermal energy with high operating efficiency. Ease of use Thanks to the digital control panel with large display, the user can communicate easily and comfortably with the boiler. Digital control to automatically keep the outlet water temperature constant This function continuously checks the outlet water temperature thanks to a sensor and transfers the data to a microprocessor. The latter adjusts the quantities of gas and water supplied to automatically keep the outlet water temperature constant based on the value set by the user and the actual inlet water temperature. Digital control to automatically keep the outlet water temperature constant This function continuously checks the outlet water temperature thanks to a sensor and transfers the data to a microprocessor. The latter adjusts the quantities of gas and water supplied to automatically keep the outlet water temperature constant based on the value set by the user and the actual inlet water temperature Set the temperature with one touch To set the required temperature, simply touch the digital display. The water temperature can be set between 35°C and 65°C, allowing different needs to be satisfied with maximum ease of use. Multiple security protection This product is equipped with various safety protections, including: • Protection of the self-monitoring system • Auto power off protection, • Overheating protection • Protection from accidental interruption of electricity • Fan failure protection • Protection from electrical overload • Protection against leakage current • Protection from excessive wind pressure • Protection from excessive temperatures • Timed protection “AI” Intelligent Artificial Memory Function When restarted, the gas water heater can operate with the last previously set temperature. No need to set the temperature again - a great practical application of the ergonomics idea. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

NB IN CASE OF ABSENCE OF THE PRODUCT THE 2019 MODEL OPALIA LOW NOX WILL BE SHIPPED !!!!!!!!!!!!!!!!!!!!!!!!! Technical features Forced draft sealed chamber Efficiency class: A Sanitary load profile: M Min/max rated power: kW 6.4 - 19.2 Type of regulation: Modulating Ignition type: Electronic Specific flow rate (∆T=25 K): l/min 11 Minimum ignition flow l/min 2.7 Minimum supply pressure bar 0.1 Characteristics Electronic ignition board for: intermittent pilot flame ignition and to control the lack of burner flame. Flame modulation in relation to the temperature detected by the probe at the exchanger outlet Safety thermostat which blocks the water heater in the event of domestic hot water overheating at the exchanger outlet. Modulating gas valve. Flow sensor. Copper lamellar heat exchanger. Smoke pressure switch Standard antifreeze system (water heater ignition at 7 °C)  Dimensions Dimensions (HxWxD): 627x348x240 mm Weight: 18Kg

Read more less

NB: SINCE THIS PRODUCT IS DISCONTINUED, THE NEW AVENIR PLUS LNX MODEL WILL BE SHIPPED WHEN STOCKS END GAS WATER HEATER CHAFFOTEAUX AVENIR PLUS SFT 11 EU LPG - COMPLETE WITH FUME EXHAUST KIT: AVENIR PLUS the gas water heater with 2 - Thermostatic Sealed Chamber Water Heaters guarantees total safety and maximum comfort for the user Technical specifications Product code: 3632169 Energy label specifications according to the European ErP directive Sanitary energy efficiency Class A Pickup profile: M Description: Model: AVENIR PLUS SFT 11 EU Ignition: electronic flame ionization Type: gas instantaneous water heater with 2 - Sealed chamber water heaters Operating characteristics: Nominal heat input: 21.5 kW Nominal heat output: 19.5 kW LPG gas supply pressure: 28-30/37 mbar Consumption - LPG Gas Flow Rates/Hour: 1.9 m3/h Hydraulic characteristics: Minimum/maximum nominal pressure: 0.1/8.5 bar Minimum operating flow: 2 l/min Flow rate with salttermic(t 25C): 11 l/min electrical circuit: Maximum absorbed power: 37 kW Electrical protection type: IPX4D Main features Avenir Plus AVENIR PLUS the gas water heater with 2 thermostatic sealed chamber water heaters guarantees total safety and maximum comfort for the user. The innovative design and compact size simplify use, installation and maintenance. Sanitary comforts Thermostatic: High precision NTC probes to measure the temperature at the cold water inlet and at the hot water outlet. The temperature remains stable even in the presence of variations in the water flow rate. The solar kit with thermostatic valve allows you to connect Avenir Plus to solar systems An ecological solution to save energy. Temperature control via probe. Convenience of installation use Different powers to increase the hot water flow rate (11 and 16 l/min with !t 25, C). Pressure switch for fume control. Versatile: Works perfectly with low hydraulic pressures (0.1 bar). Compatible with solar systems for greater gas savings. 2 - Sealed chamber water heaters of maximum safety for unventilated spaces. Available in 11 and 16 liter versions, natural gas and butane gas. sanitary pressure switch. energy saving and environmentally friendly Final 25% gas consumption reduction thanks to electronic ignition and flame ionization. Additional savings in gas consumption by combining the water heater with our solar systems. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the eco-design directive (ErP notcome ,© Energy Related Products ,î) imposes a minimum energy efficiency for heating devices for the production of hot water in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows for comparisons on the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and kettles placed on the market from 26 September 2015. It's about me too YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label; technical product sheet; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold together with other additional devices; technical sheet of the system with the parts relating to the products and the system already compiled. Dealer Responsibility First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible; all appliances and/systems are always accompanied by the obligatory technical data sheets; any type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production must be equipped with the new energy label which will report the energy class and main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of appliance there are different labels. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also provided in cases where a series of combined appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less