Sealed Chamber Gas Water Heater Savio SAVINO HE 14S Low NOx Methane Complete with Smoke Exhaust Kit Water heater Plus 14S Nominal heat input (Hi) kW 28.0 Maximum water flow rate (increase at 25 °C) kg/min 14.0 Appliance type C 13-33 Maximum water pressure (Pw) bar 10 Minimum water pressure (Pw) bar 0.2 Power supply 230V ~ 50Hz IPX4 electrical protection degree Ignition method Automatic impulse ignition controlled directly from the water opening Destination countries IT G 1/2 gas inlet fitting G 1/2 cold water inlet fitting G 1/2 hot water outlet fitting Diameter of the flue gas exhaust pipe mm Ø 60 x Ø 100 ErP DATA XL load profile Energy efficiency of the water heating system (ηWH) % 84.0 Energy efficiency of water heating system A Daily gas consumption (corrected) kWh 23.583 Daily electricity consumption (corrected) kWh 0.064 Annual electricity consumption AEC (kWh) 14 NOx mg/kWh 29 Internal sound power level (LWA) dB 61 NOx class 6 Product code 10104.1009.0/0 (LPG)/ 10114.1009.0/0 (MET) SAVINO Low NOx emission gas wall mounted water heater Available in 12 kW, 14 kW and 16 kW versions with very compact dimensions Energy saving This product features advanced technologies called Strengthened Combustion and Forced Combustion. These two patents make it possible to make the best use of thermal energy with high operating efficiency. Ease of use Thanks to the digital control panel with large display, the user can communicate easily and comfortably with the boiler. Digital control to automatically keep the outlet water temperature constant This function continuously checks the outlet water temperature thanks to a sensor and transfers the data to a microprocessor. The latter adjusts the quantities of gas and water supplied to automatically keep the outlet water temperature constant based on the value set by the user and the actual inlet water temperature. Digital control to automatically keep the outlet water temperature constant This function continuously checks the outlet water temperature thanks to a sensor and transfers the data to a microprocessor. The latter adjusts the quantities of gas and water supplied to automatically keep the outlet water temperature constant based on the value set by the user and the actual inlet water temperature Set the temperature with one touch To set the required temperature, simply touch the digital display. The water temperature can be set between 35°C and 65°C, allowing different needs to be satisfied with maximum ease of use. Multiple security protection This product is equipped with various safety protections, including: • Protection of the self-monitoring system • Auto power off protection, • Overheating protection • Protection from accidental interruption of electricity • Fan failure protection • Protection from electrical overload • Protection against leakage current • Protection from excessive wind pressure • Protection from excessive temperatures • Timed protection “AI” Intelligent Artificial Memory Function When restarted, the gas water heater can operate with the last previously set temperature. No need to set the temperature again - a great practical application of the ergonomics idea. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

NB IN CASE OF ABSENCE OF THE PRODUCT THE 2019 MODEL OPALIA LOW NOX WILL BE SHIPPED !!!!!!!!!!!!!!!!!!!!!!!!! Technical features Forced draft sealed chamber Efficiency class: A Sanitary load profile: M Min/max rated power: kW 6.4 - 19.2 Type of regulation: Modulating Ignition type: Electronic Specific flow rate (∆T=25 K): l/min 11 Minimum ignition flow l/min 2.7 Minimum supply pressure bar 0.1 Characteristics Electronic ignition board for: intermittent pilot flame ignition and to control the lack of burner flame. Flame modulation in relation to the temperature detected by the probe at the exchanger outlet Safety thermostat which blocks the water heater in the event of domestic hot water overheating at the exchanger outlet. Modulating gas valve. Flow sensor. Copper lamellar heat exchanger. Smoke pressure switch Standard antifreeze system (water heater ignition at 7 °C)  Dimensions Dimensions (HxWxD): 627x348x240 mm Weight: 18Kg

Read more less

NB: SINCE THIS PRODUCT IS DISCONTINUED, THE NEW AVENIR PLUS LNX MODEL WILL BE SHIPPED WHEN STOCKS END GAS WATER HEATER CHAFFOTEAUX AVENIR PLUS SFT 11 EU LPG - COMPLETE WITH FUME EXHAUST KIT: AVENIR PLUS the gas water heater with 2 - Thermostatic Sealed Chamber Water Heaters guarantees total safety and maximum comfort for the user Technical specifications Product code: 3632169 Energy label specifications according to the European ErP directive Sanitary energy efficiency Class A Pickup profile: M Description: Model: AVENIR PLUS SFT 11 EU Ignition: electronic flame ionization Type: gas instantaneous water heater with 2 - Sealed chamber water heaters Operating characteristics: Nominal heat input: 21.5 kW Nominal heat output: 19.5 kW LPG gas supply pressure: 28-30/37 mbar Consumption - LPG Gas Flow Rates/Hour: 1.9 m3/h Hydraulic characteristics: Minimum/maximum nominal pressure: 0.1/8.5 bar Minimum operating flow: 2 l/min Flow rate with salttermic(t 25C): 11 l/min electrical circuit: Maximum absorbed power: 37 kW Electrical protection type: IPX4D Main features Avenir Plus AVENIR PLUS the gas water heater with 2 thermostatic sealed chamber water heaters guarantees total safety and maximum comfort for the user. The innovative design and compact size simplify use, installation and maintenance. Sanitary comforts Thermostatic: High precision NTC probes to measure the temperature at the cold water inlet and at the hot water outlet. The temperature remains stable even in the presence of variations in the water flow rate. The solar kit with thermostatic valve allows you to connect Avenir Plus to solar systems An ecological solution to save energy. Temperature control via probe. Convenience of installation use Different powers to increase the hot water flow rate (11 and 16 l/min with !t 25, C). Pressure switch for fume control. Versatile: Works perfectly with low hydraulic pressures (0.1 bar). Compatible with solar systems for greater gas savings. 2 - Sealed chamber water heaters of maximum safety for unventilated spaces. Available in 11 and 16 liter versions, natural gas and butane gas. sanitary pressure switch. energy saving and environmentally friendly Final 25% gas consumption reduction thanks to electronic ignition and flame ionization. Additional savings in gas consumption by combining the water heater with our solar systems. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the eco-design directive (ErP notcome ,© Energy Related Products ,î) imposes a minimum energy efficiency for heating devices for the production of hot water in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows for comparisons on the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and kettles placed on the market from 26 September 2015. It's about me too YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label; technical product sheet; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold together with other additional devices; technical sheet of the system with the parts relating to the products and the system already compiled. Dealer Responsibility First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible; all appliances and/systems are always accompanied by the obligatory technical data sheets; any type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production must be equipped with the new energy label which will report the energy class and main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of appliance there are different labels. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also provided in cases where a series of combined appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Sealed Chamber Gas Water Heater Savio SAVINO HE 16S Low NOx Methane Complete with Smoke Exhaust Kit Water heater Plus 16S Nominal heat input (Hi) kW 30.0 Maximum water flow rate (increase at 25 °C) kg/min 16.0 Appliance type C 13-33 Maximum water pressure (Pw) bar 10 Minimum water pressure (Pw) bar 0.2 Power supply 230V ~ 50Hz IPX4 electrical protection degree Ignition method Automatic impulse ignition controlled directly from the water opening Destination countries IT G 1/2 gas inlet fitting G 1/2 cold water inlet fitting G 1/2 hot water outlet fitting Diameter of the flue gas exhaust pipe mm Ø 60 x Ø 100 ErP DATA XL load profile Energy efficiency of water heating system (ηWH) % 80.5 Energy efficiency of water heating system A Daily gas consumption (corrected) kWh 24.845 Daily electricity consumption (corrected) kWh 0.061 Annual electricity consumption AEC (kWh) 14 NOx mg/kWh 47 Internal sound power level (LWA) dB 63 NOx class 6 Product code 10106.1000.0/0 LPG supply Measures HxWxD 667x345x186 SAVINO Low NOx emission gas wall mounted water heater Available in 12 kW, 14 kW and 16 kW versions with very compact dimensions Energy saving This product features advanced technologies called Strengthened Combustion and Forced Combustion. These two patents make it possible to make the best use of thermal energy with high operating efficiency. Ease of use Thanks to the digital control panel with large display, the user can communicate easily and conveniently with the boiler. Digital control to automatically keep the outlet water temperature constant This function continuously checks the outlet water temperature thanks to a sensor and transfers the data to a microprocessor. The latter adjusts the quantities of gas and water supplied to automatically keep the outlet water temperature constant based on the value set by the user and the actual inlet water temperature. Digital control to automatically keep the outlet water temperature constant This function continuously checks the outlet water temperature thanks to a sensor and transfers the data to a microprocessor. The latter adjusts the quantities of gas and water supplied to automatically keep the outlet water temperature constant based on the value set by the user and the actual inlet water temperature Set the temperature with one touch To set the required temperature, simply touch the digital display. The water temperature can be set between 35°C and 65°C, allowing different needs to be satisfied with maximum ease of use. Multiple security protection This product is equipped with various safety protections, including: • Protection of the self-monitoring system • Auto power off protection, • Overheating protection • Protection from accidental interruption of electricity • Fan failure protection • Protection from electrical overload • Protection against leakage current • Protection from excessive wind pressure • Protection from excessive temperatures • Timed protection “AI” Intelligent Artificial Memory Function When restarted, the gas water heater can operate with the last previously set temperature. No need to set the temperature again - a great practical application of the ergonomics idea. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

RINNAI INFINITY 16I GAS WATER HEATER INSIDE METHANE COMPLETE WITH FUME KIT Instantaneous gas water heater with electronic ignition and ionization flame sensor Colour: Euro White Installation: internal Forced draft sealed chamber Dimensions (hxwxd): 67.5x37x13 cm; 15 Kgs Thermal inputs (min/max): 4.7 / 34 kW Hydraulic flow rate (min/max): 2.4 / 16 l/min Standard antifreeze: down to -15°C methane version INFINITY Infinity is the line of Rinnai gas water heaters which represent the new frontier in the production of hot water, both for their SIMPLICITY of INSTALLATION and for the COMFORT (each Infinity device is equipped as standard with a remote control on which to set the desired water temperature guaranteeing all the pleasure of unlimited hot water at a constant temperature) and SAVING (Each appliance is equipped with "continuously modulating" gas valves which regulate combustion in an extremely efficient way, reducing waste) which are able to guarantee. Available in various flow capacities, from 11 to 32 l/min, they are able to meet any hot water need, even the most demanding. Infinity appliances run on gas and are available in natural gas, LPG and propane air versions (for the Sardinia region). Infinity water heaters have electronic ignition (without pilot flame) and forced flow (both in the indoor and outdoor versions) and are activated only when there is a real request for hot water (when the tap is opened) without the need for expensive storage tanks. DOMESTIC RANGE: Superior performance in small denominations The domestic Infinity range , intended for residential use or small commercial businesses, is divided into appliances for outdoor installation (11, 13, 16, 20 liters per minute) and indoor (11.16 liters per minute). Through the standard remote control on all devices (on the dashboard, which can be remotely controlled, for Infinity 11 and 16 inside cs), not only is the pleasure of having hot water exactly at the desired temperature guaranteed, without the need for mixing or waiting times, but you will also have the total security of never getting burned (especially useful for weak users such as children, the elderly and the infirm) The compact dimensions and modern aesthetics make both indoor and outdoor installation absolutely pleasant. INFINITY 16 I The infinity 16 Internal sealed chamber is an instantaneous domestic hot water producer for internal installation with electronic temperature management and water flow control. Anti-corrosion enamelled stainless steel casing and remote electronic control, positioned on the front panel, with temperature management and self-diagnosis function. Max operating temperature equal to 75° C DHW circuit connection: Cold water: R 1/2" male shut-off valve; Hot water: R 1/2" male shut-off valve; Gas connection and electricity supply: Gas: R 1/2" male shut-off valve; Power supply: AC 220V 50Hz. NB: FOR INDOOR INSTALLATION IT MUST BE INSTALLED IN A VENTILATED PLACE Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

NB: IN CASE OF LACK OF AVAILABILITY OF THIS ITEM THE OPLALIA F 15 LOW NOX MODEL WILL BE SHIPPED !!! Model: ErP efficiency class in heating/DHW: B Sanitary load profile: XL Combustion chamber: sealed with forced draft Sanitary Min/max rated power: kW 7.5 - 24.0 Heat input to the firebox kW 28.0 Type of regulation: Modulating Ignition type: Electronic Specific flow rate (∆T=25 K): l/min 14 Minimum ignition flow l/min 2.7 Minimum supply pressure bar 0.1 Electrical characteristics Supply voltage (V/Hz): 230/50 Dimensions: Dimensions (hxwxd): 627/348/240 mm ; 19.3kg Fume outlet diameter mm 80/80-60/100 LPG code - 10013754 LPG version To view further information on the product CLICK HERE and consult the technical data OPALIA The entire range of Opalia water heaters is characterized by extreme ease of use and reliable performance combined with a modern design and simplicity of use. The Opalia model is available in the open chamber and sealed chamber versions, 11 or 14 litres, all equipped with electronic ignition with safety lockout in the event of pilot flame failure. Characteristics: Modern design and compact dimensions: the water heaters can be easily installed in any room, even inside the kitchen cupboards. Maximum safety: the safety thermostat intervenes in the event of overheating of the domestic hot water; the ionisation flame control blocks the gas supply in the event of a burner flame failure; in the open chamber models, the fume anti-reflux safety device blocks the water heater in the event of a risk of fumes being released into the environment. Electronic control (only for sealed chamber models) : it is possible to optimally adapt the operation of the appliance to the conditions of use and the temperature of the hot water, guaranteeing maximum sanitary comfort and optimizing gas consumption. Any malfunctions are signaled on the LCD display. General characteristics Opalia F 11 E - A/2 and F 14 E - A/2 Sealed chamber instantaneous gas water heaters Electronic ignition board for: - check the required hot water temperature - allow the water heater to be switched on and off - check the sequence of the burner ignition cycle - check that there is no burner flame Flame modulation in relation to the temperature detected by the probe at the exchanger outlet Water heater status display and fault diagnostics Safety thermostat which blocks the water heater in the event of overheating at the exchanger outlet Modulating gas valve Flow sensor Copper lamellar heat exchanger Smoke pressure switch Standard antifreeze system (water heater ignition at 7 °C) All ready for Energy Labeling 1. ErP, Ecodesign and ELD. What do they mean and how do they differ? ErP and Ecodesign: The EU has issued new obligations for Energy Using Products (ErP). Known as the Ecodesign Directive, it prescribes minimum efficiency requirements and emission limits for heating and DHW production appliances up to 400 kW. ELD: In addition to the ErP Directive, the EU is also introducing a mandatory energy labeling for the same type of appliances up to 70 kW. The Energy Labeling Directive (ELD) requires that new products and systems for heating and DHW production are labeled with an indication of their energy efficiency class. 2. Which products are affected by the new directives? The Ecodesign directive addresses two product categories that are relevant to our installers and resellers. Category 1: Includes electric, gas and oil space heaters, combination boilers, heat pumps and cogenerators. Category 2 : includes electric, gas and oil-fired DHW production equipment, DHW heat pumps and solar systems. By combining these products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label. 3. When will the new rules apply and how will they affect me? At the moment a transition phase is underway which lasts until 26 September 2015, the day on which the new rules come into force. Until then, neither manufacturers, retailers or installers have to comply with the new ecodesign or labeling provisions. Once the new rules come into force, only products that meet the new eco-design requirements and have an energy label can be sold on the market. 4. What does it mean for me today? Installers could play an even more important role than before. The new directives open up new opportunities for Hermann Saunier Duval's partners on the provision of ErP support services and tools. Unlike appliances, labels on heating and DHW systems can only offer a first orientation and will not necessarily provide the best solution for your customer, nor give any indication of the assumed energy cost when achieving a high energy rating. This is why customers will need your advice to understand the label and select the best product or system that best meets their needs. Hermann Saunier Duval provides its partners with a software tool to easily download all the product labels in the price list and to easily and intuitively calculate the system labels that must necessarily be provided to the end customer during the offer or be displayed in retailers' public exhibition areas. Access the Software 5. Why push condensing technology right away? Condensing products reach efficiency levels above 100% and allow gas savings of up to 30% per year. They are therefore environmentally friendly products and friends of savings. Condensing products are safe and extremely silent, efficient and easily adjustable with control units and thermostats, even wireless ones, always guaranteeing the right temperature and maximum comfort in the rooms. For the energy requalification of individual homes, the 2007 Budget Law was extended until 31 December 2015. The request for a 65% tax deduction concerns, for example, the replacement of a traditional boiler with a condensing boiler. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER JUNKERS HYDROCOMPACT INDOOR WTD 15 AM E (15 LT) METHANE 2 - Forced draft sealed chamber water heaters COMPLETE WITH FUME EXHAUST KIT: Junkers Hydrocompact Indoor is the smallest instantaneous gas water heater for indoor available on the market. IN THE ABSENCE OF THE PRODUCT, THE NEW METHANE THERM 4600 S 15 MODEL WILL BE SUPPLIED Technical specifications DHW energy efficiency class (ErP): A Catalog code: WTD 15 AM E Upload profile: XL Gas instantaneous water heater 2 - Forced draft sealed chamber water heaters Flame ionisation electronic ignition Nominal heat output: 25.4 kW Nominal heat input: 27.5 kW Efficiency at 100% of rated power: 92% Efficiency at 30% of rated power: 94% Water flow rate supplied with DT 25 C: 15 l/min Minimum operating flow: 2 l/min Maximum working pressure: 12 bar Minimum operating temperature with antifreeze kit: -25 C (accessory) Remote control: accessory Display: LCD multifunction degree of protection: IPX4D Dimensions (LxWxH): mm 170x300x568 Version: CNG Features list Hydrocompact Indoor: Compact gas instantaneous water heaters for indoor use You have little space available but you don't want to give up on quality and comfort as always It's natHYDROCOMPACTINDOOR, the new compact water heater in the Junkers range: all the usual comfort in very little space! The most compact ever HYDROCOMPACT INDOOR is the smallest indoor water heater available on the market. All Junkers quality and high technology are enclosed in just 17 cm depth (12 and 15 l/min models)! Easily placed inside a wall unit in your kitchen (in compliance with current regulations), the new HYDROCOMPACT INDOOR represents the best solution for those with space problems: thanks to its extremely compact dimensions, in fact, it is able to satisfy any need for space and installation. The simplicity of great technology Thanks to the new patented Junkers Optiflow technology, HYDROCOMPACTINDOOR is able to automatically recognize the lengths of the suction and flue gas system. This intelligent system helps to increase the efficiency of the product, improving its performance and reducing consumption. The large display integrated in the appliance also allows you to manage and program the operation with extreme simplicity, and to set the water temperature just as easily, according to the different comfort requirements. Furthermore, for the most demanding customers, it is possible to view all the information present on the integrated display as well as on the remote control (accessory). Thanks to the new patented OptiFlow technology, HYDROCOMPACTINDOOR is able to automatically calculate the combustion air flow, based on the power absorbed by the fan and the rotation speed of the fan itself. This guarantees: an optimal performance of the appliance in all operating conditions the reduction of the minimum power without the risk of condensation forming on the heat exchanger greatly reduced levels of CO2 emissions Furthermore, the automatic adaptation of the fan speed to the installation conditions (length of the intake/exhaust ducts and any obstructions) ensures simpler and faster installation. Small consumption, great performance With HYDROCOMPACTINDOOR, consumption optimization is guaranteed! Thanks to the high efficiency and the wide modulation range (1:7) the water heater is able to adapt the consumption of gas required to heat the water to the real demand for sanitary water withdrawal, thereby guaranteeing all the sanitary comfort you desire and maximum savings. Furthermore, HYDROCOMPACTINDOOR can be directly connected to thermal solar systems for the production of domestic hot water: all the energy of the sun for maximum comfort and minimum consumption! Characteristics: Extremely compact dimensions: the smallest instantaneous gas water heater available on the market Automatic recognition of the lengths of the suction/flue gas system thanks to the patented OptiFlow technology Efficiency final 94% Directly connectable to thermal solar systems for the production of domestic hot water, by means of a special TWM 20 mixing valve Easy and intuitive management, thanks to the large LCD display for adjusting the temperature and viewing information relating to the operation of the appliance Possibility of satisfying all comfort needs thanks to the completeness of the range, made up of 12, 15 and 18 l/min appliances High sanitary comfort reduction of gas consumption thanks to the electronic temperature control (stability, ¤ 1C) Reduction of consumption thanks to the wide modulation intervals (1:7) Possibility of managing the water heater remotely thanks to the accessory control Elegant design The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, heating systems for the production of hot water, in order to be placed on the market, will have to comply with the ErP regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of appliances, favoring comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating the production of domestic hot water. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to better understand the characteristics of the system, acquire greater awareness of energy saving, allowing him to choose better what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the first is supplied by the manufacturer together with the product for heating/domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing for an increase in the score attributed to each appliance and increasing the energy class of the system: therefore, it is the task of those who make/install the system to provide the consumer with the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on consumption in the home, approximately 80% of which is due to heating and the production of hot water, and are now tax-incentivized. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the orientamental futur that has always distinguished the brand. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Gas water heater Therm 5700 S 17 liters t5700s 17 low NOx complete with methane fume exhaust kit 7736504994 Product data Symbol Unit 7736504994 Declared load profile XL Water heating energy efficiency class A Water heating energy efficiency ?wh % 83 Annual electricity consumption AEC kWh 25 Annual fuel consumption AFC GJ 18 Thermostat setting (factory setting) Tset °C 60 Sound power level within LWA dB 63 Daily electricity consumption (average climatic conditions) Qelec kWh 0.112 Daily fuel consumption Qfuel kWh 23,909 Nitrous oxide emissions (for gas and fuel oil only) NOx mg/kWh 26 Dimensions 575 x 365 x 170 mm Therm 5700 S Instantaneous gas water heater with touch display and electronic temperature control Intuitive setting thanks to the touch display Constant temperature hot water for maximum comfort Reduced gas consumption, thanks to the electronic control of the temperature of the water supplied Management with dedicated App, via accessory module Maximum comfort The Therm 5700 S water heater allows you to enjoy maximum comfort thanks to the constant supply of hot water: the temperature monitoring probe guarantees constant water production and without sudden changes in temperature Temperature control To be as efficient as possible, this water heater constantly monitors the temperature and flow rate of the water that is supplied by it, ensuring maximum comfort Intuitive setup Bosch products are designed to be intuitive and easy to use. The settings of the Therm 5700 S water heater are also very simple thanks to the touch display. Furthermore, using a special accessory, it can be controlled remotely via the Bosch Water App Low NOx emissions The water heater is designed to minimize polluting emissions Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER JUNKERS HYDROCOMPACT INDOOR WTD 12 AM E (12 LT) LPG 2 - Forced draft sealed chamber water heaters COMPLETE WITH FUME EXHAUST KIT: Junkers Hydrocompact Indoor is the smallest instantaneous gas water heater available on the market. IN THE ABSENCE OF THE PRODUCT, THE NEW LPG THERM 5600 S 12 MODEL WILL BE SUPPLIED Technical specifications DHW energy efficiency class (ErP): A Catalog code: WTD 12 AM E Profile of charge declared: M Gas instantaneous water heater 2 - Forced draft sealed chamber water heaters Flame ionisation electronic ignition Nominal heat output: 20.8 kW Nominal heat input: 22.5 kW Efficiency at 100% of rated power: 92% Efficiency at 30% of rated power: 94% Water flow rate supplied with DT 25 C: 12 l/min Minimum operating flow: 2 l/min Maximum working pressure: 12 bar Minimum operating temperature with antifreeze kit: -25 C (accessory) Remote control: accessory Display: LCD multifunction degree of protection: IPX4D Dimensions (LxWxH): mm 170x300x568 Version: LPG Features list Hydrocompact Indoor: Compact gas instantaneous water heaters for indoor use You have little space available but you don't want to give up on quality and comfort as always It's natHYDROCOMPACTINDOOR, the new compact water heater in the Junkers range: all the usual comfort in very little space! The most compact ever HYDROCOMPACT INDOOR is the smallest indoor water heater available on the market. All Junkers quality and high technology are enclosed in just 17 cm depth (12 and 15 l/min models)! Easily placed inside a wall unit in your kitchen (in compliance with current regulations), the new HYDROCOMPACT INDOOR represents the best solution for those with space problems: thanks to its extremely compact dimensions, in fact, it is able to satisfy any need for space and installation. The simplicity of great technology Thanks to the new patented Junkers Optiflow technology, HYDROCOMPACTINDOOR is able to automatically recognize the lengths of the suction and flue gas system. This intelligent system helps to increase the efficiency of the product, improving its performance and reducing consumption. The large display integrated in the appliance also allows you to manage and program the operation with extreme simplicity, and to set the water temperature just as easily, according to the different comfort requirements. Furthermore, for the most demanding customers, it is possible to view all the information present on the integrated display as well as on the remote control (accessory). Thanks to the new patented OptiFlow technology, HYDROCOMPACTINDOOR is able to automatically calculate the combustion air flow, based on the power absorbed by the fan and the rotation speed of the fan itself. This guarantees: an optimal performance of the appliance in all operating conditions the reduction of the minimum power without the risk of condensation forming on the heat exchanger greatly reduced levels of CO2 emissions Furthermore, the automatic adaptation of the fan speed to the installation conditions (length of the intake/exhaust ducts and any obstructions) ensures simpler and faster installation. Small consumption, great performance With HYDROCOMPACTINDOOR, consumption optimization is guaranteed! Thanks to the high efficiency and the wide modulation range (1:7) the water heater is able to adapt the consumption of gas required to heat the water to the real demand for sanitary water withdrawal, thereby guaranteeing all the sanitary comfort you desire and maximum savings. Furthermore, HYDROCOMPACTINDOOR can be directly connected to thermal solar systems for the production of domestic hot water: all the energy of the sun for maximum comfort and minimum consumption! Characteristics: Extremely compact dimensions: the smallest instantaneous gas water heater available on the market Automatic recognition of the lengths of the suction/flue gas system thanks to the patented OptiFlow technology Efficiency final 94% Directly connectable to thermal solar systems for the production of domestic hot water, by means of a special TWM 20 mixing valve Easy and intuitive management, thanks to the large LCD display for adjusting the temperature and viewing information relating to the operation of the appliance Possibility of satisfying all comfort needs thanks to the completeness of the range, made up of 12, 15 and 18 l/min appliances High sanitary comfort reduction of gas consumption thanks to the electronic temperature control (stability, ¤ 1C) Reduction of consumption thanks to the wide modulation intervals (1:7) Possibility of managing the water heater remotely thanks to the accessory control Elegant design The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, heating systems for the production of hot water, in order to be placed on the market, will have to comply with the ErP regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of appliances, favoring comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating the production of domestic hot water. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to better understand the characteristics of the system, acquire greater awareness of energy saving, allowing him to choose better what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the first is supplied by the manufacturer together with the product for heating/domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing for an increase in the score attributed to each appliance and increasing the energy class of the system: therefore, it is the task of those who make/install the system to provide the consumer with the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on consumption in the home, approximately 80% of which is due to heating and the production of hot water, and are now tax-incentivized. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the orientamental futur that has always distinguished the brand. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

NB: SINCE THIS PRODUCT IS DISCONTINUED, THE NEW AVENIR PLUS LNX MODEL WILL BE SHIPPED WHEN STOCKS END GAS WATER HEATER CHAFFOTEAUX AVENIR PLUS SFT 11 EU METHANE - COMPLETE WITH FUME EXHAUST KIT: AVENIR PLUS the gas water heater with 2 - Thermostatic Sealed Chamber Water Heaters guarantees total safety and maximum comfort for the user. Technical specifications Product code: 3632170 Energy label specifications according to the European ErP directive Sanitary energy efficiency Class A Pickup profile: M Description: Model: AVENIR PLUS SFT 11 EU Ignition: electronic flame ionization Type: gas instantaneous water heater with 2 - Sealed chamber water heaters Operating characteristics: Nominal heat input: 21.5 kW Nominal heat output: 19.5 kW Methane gas supply pressure: 20 mbar Consumption - Methane Gas Flow Rates/Hour: 2.5 m3/h Power supply: METHANE Hydraulic characteristics: Minimum/maximum nominal pressure: 0.1/8.5 bar Minimum operating flow: 2 l/min Flow rate with salttermic(t 25C): 11 l/min electrical circuit: Maximum absorbed power: 37 kW Electrical protection type: IPX4D Main features Avenir Plus AVENIR PLUS the gas water heater with 2 thermostatic sealed chamber water heaters guarantees total safety and maximum comfort for the user. The innovative design and compact size simplify use, installation and maintenance. Sanitary comforts Thermostatic: High precision NTC probes to measure the temperature at the cold water inlet and at the hot water outlet. The temperature remains stable even in the presence of variations in the water flow rate. The solar kit with thermostatic valve allows you to connect Avenir Plus to solar systems An ecological solution to save energy. Temperature control via probe. Convenience of installation use Different powers to increase the hot water flow rate (11 and 16 l/min with !t 25, C). Pressure switch for fume control. Versatile: Works perfectly with low hydraulic pressures (0.1 bar). Compatible with solar systems for greater gas savings. 2 - Sealed chamber water heaters of maximum safety for unventilated spaces. Available in 11 and 16 liter versions, natural gas and butane gas. sanitary pressure switch. energy saving and environmentally friendly Final 25% gas consumption reduction thanks to electronic ignition and flame ionization. Additional savings in gas consumption by combining the water heater with our solar systems. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the eco-design directive (ErP notcome ,© Energy Related Products ,î) imposes a minimum energy efficiency for heating devices for the production of hot water in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows for comparisons on the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and kettles placed on the market from 26 September 2015. It's about me too YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label; technical product sheet; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold together with other additional devices; technical sheet of the system with the parts relating to the products and the system already compiled. Dealer Responsibility First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible; all appliances and/systems are always accompanied by the obligatory technical data sheets; any type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production must be equipped with the new energy label which will report the energy class and main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of appliance there are different labels. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also provided in cases where a series of combined appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

JUNKERS BOSCH THERM 6000i S WTD12-2 METHANE gas WATER HEATER WITH FUME KIT Water heating energy efficiency class A Nitrous oxide emissions (for gas and fuel oil only) NOx mg/kWh 127 Sound power level within LWA dB 63 Declared load profile M Other load profiles S Daily electricity consumption (average climatic conditions) Qelec kWh 0.096 Annual electricity consumption AEC kWh 21 Annual electricity consumption (other load profiles, average climate conditions) AEC kWh 25 Water heating energy efficiency ηwh % 69 Water heating energy efficiency (other load profiles) ηwh % 66 Daily fuel consumption Qfuel kWh 8,885 Annual fuel consumption AFC GJ 6 Annual fuel consumption (other load profiles) AFC GJ 2 THERM 6000i Refined design thanks to the front in tempered titanium glass and the soft touch display Water heater controlled via smart device through the Bosch Water App Optimized performance, it guarantees savings of up to 60 liters of water and up to 35% of gas Degree-by-degree temperature control for high-level comfort Refined design, touch display The Therm 6000i S water heater stands out for its modern and refined design. It comes with an elegant front in tempered titanium glass, available in black or white, and an integrated digital display with soft touch control. Thanks also to its small size, it is ideal for enriching your home with an innovative design element Saving up to 60 liters of water The degree-by-degree temperature regulation allows the Therm 6000i S water heater to have an optimized efficiency, thus guaranteeing savings of up to 60 liters of water and up to 35% of gas. These savings are favored by the Smart Hydraulics valve which allows the temperature to be reached quickly and increases its stability Bosch Water app The Therm 6000i S water heater can also be controlled with the dedicated Bosch Water app from iOS and Android smart devices (smartphones and tablets) via Bluetooth. The App allows numerous functions in addition to water temperature control, including the history of the last five consumptions and diagnostics in case of malfunctions High level comfort The comfort created by the Therm 6000i S water heater is maximum. Thanks to a patented algorithm, OptiFlow, optimal efficiency of the water heater is possible in all operating conditions and the minimum power used decreases, avoiding the risk of condensation forming on the heat exchanger. Product Guarantee: All products for sale on our site are new and im

Read more less

Overview GAS WATER HEATER JUNKERS HYDROCOMPACT INDOOR WTD 18 AM E (18 LT) METHANE 2 - Forced draft sealed chamber water heaters COMPLETE WITH FUME EXHAUST KIT: Junkers Hydrocompact Indoor is the smallest instantaneous gas water heater for indoor available on the market. IN THE ABSENCE OF THE PRODUCT, THE NEW METHANE THERM 4600 S 18 MODEL WILL BE SUPPLIED Technical specifications DHW energy efficiency class (ErP): A Catalog code: WTD 18 AM E Declared upload profile: XL Gas instantaneous water heater 2 - Forced draft sealed chamber water heaters Flame ionisation electronic ignition Nominal heat output: 31.6 kW Nominal heat input: 34 kW Efficiency at 100% of rated power: 92% Efficiency at 30% of rated power: 94% Water flow delivered with DT 25 C: 18 l/min Minimum operating flow: 2.2 l/min Maximum working pressure: 12 bar Minimum operating temperature with antifreeze kit: -25 C (accessory) Remote control: accessory Display: LCD multifunction degree of protection: IPX4D Dimensions (LxWxH): mm 175x364x568 Version: CNG Features list Hydrocompact Indoor: Compact gas instantaneous water heaters for indoor use You have little space available but you don't want to give up on quality and comfort as always It's natHYDROCOMPACTINDOOR, the new compact water heater in the Junkers range: all the usual comfort in very little space! The most compact ever HYDROCOMPACT INDOOR is the smallest indoor water heater available on the market. All Junkers quality and high technology are enclosed in just 17 cm depth (12 and 15 l/min models)! Easily placed inside a wall unit in your kitchen (in compliance with current regulations), the new HYDROCOMPACT INDOOR represents the best solution for those with space problems: thanks to its extremely compact dimensions, in fact, it is able to satisfy any need for space and installation. The simplicity of great technology Thanks to the new patented Junkers Optiflow technology, HYDROCOMPACTINDOOR is able to automatically recognize the lengths of the suction and flue gas system. This intelligent system helps to increase the efficiency of the product, improving its performance and reducing consumption. The large display integrated in the appliance also allows you to manage and program the operation with extreme simplicity, and to set the water temperature just as easily, according to the different comfort requirements. Furthermore, for the most demanding customers, it is possible to view all the information present on the integrated display as well as on the remote control (accessory). Thanks to the new patented OptiFlow technology, HYDROCOMPACTINDOOR is able to automatically calculate the combustion air flow, based on the power absorbed by the fan and the rotation speed of the fan itself. This guarantees: an optimal performance of the appliance in all operating conditions the reduction of the minimum power without the risk of condensation forming on the heat exchanger greatly reduced levels of CO2 emissions Furthermore, the automatic adaptation of the fan speed to the installation conditions (length of the intake/exhaust ducts and any obstructions) ensures simpler and faster installation. Small consumption, great performance With HYDROCOMPACTINDOOR, consumption optimization is guaranteed! Thanks to the high efficiency and the wide modulation range (1:7) the water heater is able to adapt the consumption of gas required to heat the water to the real demand for sanitary water withdrawal, thereby guaranteeing all the sanitary comfort you desire and maximum savings. Furthermore, HYDROCOMPACTINDOOR can be directly connected to thermal solar systems for the production of domestic hot water: all the energy of the sun for maximum comfort and minimum consumption! Characteristics: Extremely compact dimensions: the smallest instantaneous gas water heater available on the market Automatic recognition of the lengths of the suction/flue gas system thanks to the patented OptiFlow technology Efficiency final 94% Directly connectable to thermal solar systems for the production of domestic hot water, by means of a special TWM 20 mixing valve Easy and intuitive management, thanks to the large LCD display for adjusting the temperature and viewing information relating to the operation of the appliance Possibility of satisfying all comfort needs thanks to the completeness of the range, made up of 12, 15 and 18 l/min appliances High sanitary comfort reduction of gas consumption thanks to the electronic temperature control (stability, ¤ 1C) Reduction of consumption thanks to the wide modulation intervals (1:7) Possibility of managing the water heater remotely thanks to the accessory control Elegant design The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, heating systems for the production of hot water, in order to be placed on the market, will have to comply with the ErP regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of appliances, favoring comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating the production of domestic hot water. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to better understand the characteristics of the system, acquire greater awareness of energy saving, allowing him to choose better what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the first is supplied by the manufacturer together with the product for heating/domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing for an increase in the score attributed to each appliance and increasing the energy class of the system: therefore, it is the task of those who make/install the system to provide the consumer with the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on consumption in the home, approximately 80% of which is due to heating and the production of hot water, and are now tax-incentivized. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the orientamental futur that has always distinguished the brand. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less