Technical features Code : REU-A1720FFU Type of Installation : Internal Device typology : C Energy class: A Load profile : L Performance Thermal Capacity (kW) min 4.1 / Max 27.2 Hydraulic flow rate (l/min) min 2 l/min MAX 14 l/min (20 l/min ∆T=15°C) Max temperature that can be set (°C) 65 Minimum activation pressure (bar) 0.1 Nominal operating pressure (bar) min 1 Max 8.30 Max number of additional controls that can be installed 3 Electricity consumption (W) Normal 55 W Stand-by 1.5 W Antifreeze 116 W Predisposition for connection with recirculation yes Arrangement for integration with solar yes Fittings and flue Ø 60/100 coax flue, max discharge distance 5m+3 bends, divisible Ø 80/80. Male outlet. See the 'accessories' section Water Inlet: ½” Water Outlet: ½” Gas ½” Standard antifreeze, down to -15°C CNG power supply Dimensions Dimensions ( LxWxH ) : 373 x 173 x 541 mm Weight : 14.5Kg INFINITY The 17 litres/min Infinity 17i water heater is a domestic instantaneous water heater to be installed inside the home. It produces hot water only in response to a real request (only when the tap is opened). Unlike a kettle, it does not need to store large quantities of water at high temperatures. This allows for great savings in terms of energy costs and water consumption . No need to mix the water, which immediately comes out at the desired temperature. NEW The installer can select the "high altitude" setting to ensure maximum performance of the water heater even when installed in the high mountains, in rarefied air conditions NEW When the water heater and the utilities are distant and heat dispersions are generated, the installer can correct the temperature according to the degree of use (from +1°C to +3°C) by perfecting the temperature at the tap NEW A progressive alert signals any limescale deposits. This allows cleaning to be carried out before the level is such as to cause a malfunction. Instantaneous gas-fired domestic hot water producer for indoor installation. Equipped with a control panel on the dashboard for managing the temperature, the degree and self-diagnosis. Anti-corrosion enamelled galvanized steel casing. Like all Rinnai water heaters, the new Infinity control the temperature to the degree and optimize comfort in the name of energy savings Temperature refinement to degree at point of use When the water heater is far from the utilities and the pipes generate heat dispersion, it is possible to correct the temperature at the tap from +1°C to +3°C Are you a home user? Register your new water heater on rinnai.it in the appropriate section to extend the warranty of your water heater to 4 years free of charge* The warranty extension (valid only on spare parts) can be requested on domestic water heaters. Consult the technical manuals to find out the details of the initiative. AT OUR HOME WE ARE FREE TO BE OURSELVES Rinnai responds to the different needs of hot water. A product available in different sizes 14 or 17 litres/minute. A studio flat, an apartment, one or more people living together. Always, an appliance that takes up very little space and offers endless hot water, giving way to what matters most Characteristics Unlimited hot water without sudden changes in temperature Electronic ignition without pilot flame Temperature control to the degree via the series controller Flow regulator: constant temperature as the flow varies Integrated automatic reset as standard Progressive LC code that detects any limescale deposits Free warranty extension on rinnai.it Functions Can be combined with solar panels Can be combined with recirculation Can be combined with max storage tank lt 500 Max 3 additional remote controls High Altitude Function Ultrathin Standard antifreeze up to -15°C Perfect temperature despite dispersions** Eco friendly Product Guarantee: All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Gas water heater RINNAI INFINITY 17i complete with smoke kit cod. REU-A1720FFU - NEW Code REU-A1720FFU Internal installation Device type C Energy class A Load profile L Available versions Natural gas, LPG, propane air Thermal capacity (kW) min 4.1 / Max 32.40 Hydraulic flow rate (l/min) min 2 l/min MAX 17 l/min (20 l/min ∆T=15°C) Max temperature that can be set (°C) 65 Minimum activation pressure (bar) 0.1 Nominal operating pressure (bar) min 1 Max 8.30 Ø 60/100 coax flue, max discharge distance 5m+3 bends, divisible Ø 80/80. Male outlet. See the 'accessories' section Max number of additional controls that can be installed 3 Electricity consumption (W) Normal 55 W Stand-by 1.5 W Antifreeze 116 W Predisposition for connection with recirculation yes Arrangement for integration with solar yes Standard antifreeze, down to -15°C Dimensions WxDxH 373x173x541 mm INFINITY The 17 litres/min Infinity 17i water heater is a domestic instantaneous water heater to be installed inside the home. It produces hot water only in response to a real request (only when the tap is opened). Unlike a kettle, it does not need to store large quantities of water at high temperatures. This allows for great savings in terms of energy costs and water consumption . No need to mix the water, which immediately comes out at the desired temperature. NEW The installer can select the "high altitude" setting to ensure maximum performance of the water heater even when installed in the high mountains, in rarefied air conditions NEW When the water heater and the utilities are distant and heat dispersions are generated, the installer can correct the temperature according to the degree of use (from +1°C to +3°C) by perfecting the temperature at the tap NEW A progressive alert signals any limescale deposits. This allows cleaning to be carried out before the level is such as to cause a malfunction. Instantaneous gas-fired domestic hot water producer for indoor installation. Equipped with a control panel on the dashboard for managing the temperature, the degree and self-diagnosis. Anti-corrosion enamelled galvanized steel casing. Characteristics Unlimited hot water without sudden changes in temperature Electronic ignition without pilot flame Temperature control to the degree via the series controller Flow regulator: constant temperature as the flow varies Integrated automatic reset as standard Progressive LC code that detects any limescale deposits Free warranty extension on rinnai.it Functions Can be combined with solar panels Can be combined with recirculation Can be combined with max storage tank lt 500 Max 3 additional remote controls High Altitude Function Ultrathin Standard antifreeze up to -15°C Perfect temperature despite dispersions** Eco friendly Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Overview NEW GAS WATER HEATER RINNAI INFINITY 28I INTERNAL METHANE Cod.REU-VCM2837FFUD-NG, 2 - Sealed Chamber Water Heaters WITH FORCED DRAFT, COMPLETE WITH FUME EXHAUST KIT - ErP Energy class A Technical specifications Energy label specifications according to the European ErP directive Sanitary Energy Efficiency ACS: Class A Declared upload profile: XL Electricity consumption (kWh/year) and fuel (GJ/year) 8 - 18 Indoor noise levels (dB) 67 Characteristics of heating/DHW operation: Code: REU-VCM2837FFUD-NG 2 - Forced flow sealed chamber water heaters Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulmax lt 1000 Fine series antifreeze -20C Installation: Internal - Villa - Apartment with multifunctional shower/whirlpool and professional installations Dimensions: mm 582x356x235 ; 20 Kgs Methane heat input Min/Max (kW) 2.8/53 Water flow t 25C Max (l/min) 28 Max operating temperature (C) 85 Minimum activation pressure (bar) 0.1 Nominal operating pressure Min/Max (bar) 2.5/10 Electric consumption normal / stand-by / antigel (W) 97 / 2 / 120 METHANE version Main features RINNAI GAS WATER HEATER: INFINITY saves infinite comforts Rinnai Infinity is the line of instantaneous GAS* water heaters, with forced flow or otherwise, for professional domestic use, indoors and outdoors, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Gradual temperature selection via the standard remote control energy saving Simplicity of design and installation Compact size Superior performance and absolute security Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled steel-zinc cape Frost, thanks to the standard antifreeze on all appliances (including indoors) The SERIES remote control allows the user to select the desired water temperature with precision to the degree, directly from the point of use (when the tap is opened). RESULT: no need to mix for maximum COMFORT and absolute PROTECTION from the risk of burns. energy savings: Rinnai Infinity eliminates any useless waste and ensures real savings: The gas operation guarantees considerably lower costs than the electric one. Respecting a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent reduction in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers, other heat generators, modulating, solquandserve and solquantserve, to reach the set temperature Domestic Range: Superior performance in small denominations The wide domestic range, differentiated in various hydraulic flow rates, allows the user to choose the most suitable appliance for his needs. The compact dimensions and the captivating aesthetics also guarantee a harmonious and discreet installation, both inside and outside the home INFINITY 28i NEW INFINITY 28 INSTANTANEOUS GAS-FIRED WATER HEATER Infinity 28 Professional Interrange is an instant domestic hot water producer for indoor installation with electronic temperature management and water flow control. Anti-corrosion enamelled steel casing and standard electronic controls with temperature management and self-diagnosis function. Max operating temperature equal to 85 C. Comfort and Economy The new Rinnai Infinity 28i and 28e water heaters (codes REUVCM2837FFUD for internal use REU-VCM2837WD for external use) have the ability to manage an external circulator (optional) in domestic systems equipped with a domestic hot water recirculation ring, to immediately supply hot water to the place of use, according to two modes of operation: "Economy" (factory setting) which aims at maximum savings in consumption thanks to less frequent switching on of the pump, at regular intervals from about 30 to 70 minutes. "Comfort" which guarantees maximum well-being even in systems in which poor insulation of the water circuits is assumed, therefore greater heat dispersions, with more frequent pump ignition cycles, at intervals from about 15 to 30 minutes. Antifreeze Standard antifreeze system (also on indoor appliances) up to -20C. Status monitor Control panel The Infinity 28s feature a front panel statpost monitor, which displays operating temperature and fault codes. Up to 4 remote controls can be connected to the appliance (of which add to the dashboard for the internal model) offering the following options: temperature control directly from the room of use self-diagnosis additional functions with "de luxe" controls for kitchen bathrooms Cascade connections In addition to the previous management and control systems for cascade appliances (REU-MSB-MB boards), the new Infinity 28 is equipped with a connector for connection to a Building Management System (REU-OPU) which allows error signals to be remoted. ERP extension Rinnai's commitment to a sustainable future. For this reason, all our products are "ERP Ready" or in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-design. The Directive establishes very precise reference points for the manufacture of environmentally friendly products and defines the mandatory minimum requirements of energy and environmental performance for energy-consuming instruments. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energy on final consumption of 20% From 26 September 2015, appliances for winter air conditioning and the production of domestic hot water are accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD Labeling Directive (2010/30/EC) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to give its contribution to an eco-sustainable world Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Water heater Gas water heater RINNAI INFINITY 17i complete with smoke kit cod. REU-A1720FFU LPG - NEW Code REU-A1720FFU Internal installation Device type C Energy class A Load profile L Available versions Natural gas, LPG, propane air Thermal Capacity (kW) min 4.1 / Max 32.40 Hydraulic flow rate (l/min) min 2 l/min MAX 17 l/min (20 l/min ∆T=15°C) Max settable temperature (°C) 65 Minimum activation pressure (bar) 0.1 Nominal operating pressure (bar) min 1 Max 8.30 Ø 60/100 coax flue, max discharge distance 5m+3 bends, divisible Ø 80/80. Male outlet. See the 'accessories' section Max number of additional controls that can be installed 3 Electricity consumption (W) Normal 55 W Stand-by 1.5 W Antifreeze 116 W Predisposition for connection with recirculation yes Arrangement for integration with solar yes Standard antifreeze, down to -15°C Dimensions WxDxH 373x173x541 mm LPG INFINITY The 17 litres/min Infinity 17i water heater is a domestic instantaneous water heater to be installed inside the home. It produces hot water only in response to a real request (only when the tap is opened). Unlike a kettle, it does not need to store large quantities of water at high temperatures. This allows for great savings in terms of energy costs and water consumption . No need to mix the water, which immediately comes out at the desired temperature. NEW The installer can select the "high altitude" setting to ensure maximum performance of the water heater even when installed in the high mountains, in rarefied air conditions NEW When the water heater and the utilities are distant and heat dispersions are generated, the installer can correct the temperature according to the degree of use (from +1°C to +3°C) by perfecting the temperature at the tap NEW A progressive alert signals any limescale deposits. This allows cleaning to be carried out before the level is such as to cause a malfunction. Instantaneous gas-fired domestic hot water producer for indoor installation. Equipped with a control panel on the dashboard for managing the temperature, the degree and self-diagnosis. Anti-corrosion enamelled galvanized steel casing. Characteristics Unlimited hot water without sudden changes in temperature Electronic ignition without pilot flame Temperature control to the degree via the series controller Flow regulator: constant temperature as the flow varies Integrated automatic reset as standard Progressive LC code that detects any limescale deposits Free warranty extension on rinnai.it Functions Can be combined with solar panels Can be combined with recirculation Can be combined with max storage tank lt 500 Max 3 additional remote controls High Altitude Function Ultrathin Standard antifreeze up to -15°C Perfect temperature despite dispersions** Eco friendly Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Overview NEW RINNAI INFINITY 28I GAS WATER HEATER INTERNAL LPG Cod. REU-VCM2837FFUD-LPG, 2 - Forced draft sealed chamber water heaters, COMPLETE WITH FUME EXHAUST KIT - ErP Energy Class A. Technical specifications Energy label specifications according to the European ErP directive Sanitary Energy Efficiency ACS: Class A Declared upload profile: XL Electricity consumption (kWh/year) and fuel (GJ/year) 8 - 18 Indoor noise levels (dB) 67 Characteristics of heating/DHW operation: Code: REU-VCM2837FFUD-LPG 2 - Forced flow sealed chamber water heaters Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulmax lt 1000 Fine series antifreeze -20C Installation: Internal - Villa - Apartment with multifunctional shower/whirlpool and professional installations Dimensions: mm 582x356x235 ; 20 Kgs Methane heat input Min/Max (kW) 2.8/53 Water flow t 25C Max (l/min) 28 Max operating temperature (C) 85 Minimum activation pressure (bar) 0.1 Nominal operating pressure Min/Max (bar) 2.5/10 Electric consumption normal / stand-by / antigel (W) 97 / 2 / 120 LPG version Main features RINNAI GAS WATER HEATER: INFINITY saves infinite comforts Rinnai Infinity is the line of instantaneous GAS* water heaters, with forced flow or otherwise, for professional domestic use, indoors and outdoors, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Gradual temperature selection via the standard remote control energy saving Simplicity of design and installation Compact size Superior performance and absolute security Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled steel-zinc cape Frost, thanks to the standard antifreeze on all appliances (including indoors) The SERIES remote control allows the user to select the desired water temperature with precision to the degree, directly from the point of use (when the tap is opened). RESULT: no need to mix for maximum COMFORT and absolute PROTECTION from the risk of burns. energy savings: Rinnai Infinity eliminates any useless waste and ensures real savings: The gas operation guarantees considerably lower costs than the electric one. Respecting a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent reduction in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers, other heat generators, modulating, solquandserve and solquantserve, to reach the set temperature Domestic range: Superior performance in small denominations The wide domestic range, differentiated in various hydraulic flow rates, allows the user to choose the most suitable appliance for his needs. The compact dimensions and the captivating aesthetics also guarantee a harmonious and discreet installation, both inside and outside the home INFINITY 28i NEW INFINITY 28 INSTANTANEOUS GAS-FIRED WATER HEATER Infinity 28 Professional Interrange is an instant domestic hot water producer for indoor installation with electronic temperature management and water flow control. Anti-corrosion enamelled steel casing and standard electronic controls with temperature management and self-diagnosis function. Max operating temperature equal to 85 C. Comfort and Economy The new Rinnai Infinity 28i and 28e water heaters (codes REUVCM2837FFUD for internal use REU-VCM2837WD for external use) have the ability to manage an external circulator (optional) in domestic systems equipped with a domestic hot water recirculation ring, to immediately supply hot water to the place of use, according to two modes of operation: "Economy" (factory setting) which aims at maximum savings in consumption thanks to less frequent switching on of the pump, at regular intervals from about 30 to 70 minutes. "Comfort" which guarantees maximum well-being even in systems in which poor insulation of the water circuits is assumed, therefore greater thermal dispersions, with more frequent pump ignition cycles, at intervals from about 15 to 30 minutes. Antifreeze Standard antifreeze system (also on indoor appliances) up to -20C. Status monitor Control panel The Infinity 28s feature a front panel statpost monitor, which displays operating temperature and fault codes. Up to 4 remote controls can be connected to the appliance (of which add to the dashboard for the internal model) offering the following options: temperature control directly from the room of use self-diagnosis additional functions with "de luxe" controls for kitchen bathrooms Cascade connections In addition to the previous management and control systems for cascade appliances (REU-MSB-MB boards), the new Infinity 28 is equipped with a connector for connection to a Building Management System (REU-OPU) which allows error signals to be remoted. ERP extension Rinnai's commitment to a sustainable future. For this reason, all our products are "ERP Ready" or in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-design. The Directive establishes very precise reference points for the manufacture of environmentally friendly products and defines the mandatory minimum requirements of energy and environmental performance for energy-consuming instruments. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energy on final consumption of 20% From 26 September 2015, appliances for winter air conditioning and the production of domestic hot water are accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD Labeling Directive (2010/30/EC) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to give its contribution to an eco-sustainable world Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ATTENTION the product is available on order! Rinnai Infinity Sensei N32I indoor condensing water heater Complete with smoke outlet kit REU-N3237FFC-E-LPG LPG - NEW Internal installation Dimensions (H x W x D) (mm) 670x470x276 Energy Class A XXL profile Max hydraulic flow rate Δt 25°C (l/min) 32 l/min Frontal Display Thermoregulation Can be cascaded Yes Internal installation / Villa - Apartment with multifunctional shower, hydromassage / Professional installation sensei Rinnai presents Infinity Sensei, the masters of condensation, the brand new range of instant gas condensing water heaters of 26 and 32 litres/minute, for indoors or outdoors. Ultra performing on their own, perfect in cascade installations, where they express all their potential by satisfying even the most important hot water production needs in commercial premises, accommodation facilities, production plants and much more. Condensation is ECO-SUSTAINABLE TECHNOLOGY In condensing technology, the water vapor contained in the combustion products is also used to generate heat. For this reason, the Infinity Sensei series condensing water heaters reduce consumption by up to 30% and polluting emissions (NOx and CO₂) by up to 70%. DID YOU KNOW THAT? In professional applications, only the condensing sanitary production is compliant with the law. The Ministerial Decree "Minimum requirements" of 6/26/2015 regulates both heating and the production of domestic hot water, also called, like heating, to respect a minimum efficiency on the PCI equal to 90 + 2 log Pn . This value can only be reached with condensation . From the entry into force of the decree, in order to have parameters of polluting emissions and energy efficiency compliant with the legislation, all economic entities that use hot water professionally must use gas-fired producers only of the condensing type in all cases ( replacement, renovation and new construction). The Infinity Sensei condensing water heaters they are perfectly compatible with renewable sources they can manage up to 4 additional remote commands for temperature control from different points of use have an increasingly user-friendly electronic board, which allows you to set and monitor the operating parameters directly from the standard remote control. The Technician can activate the Service Soon parameter, a warning signal for scheduled maintenance, functional to guarantee the periodicity of the assistance interventions, which preserve the longevity of the systems. Optimal combustion, even in the mountains The Infinity SENSEI condensing appliances, like all the new Rinnai water heaters, are equipped with the high altitude function that the technician can set in addition to the 900m altitude where the air is rarefied. Installation in cascade and in Modus Infinity Sensei for indoor or outdoor use can be connected to each other in certified turnkey systems that allow all the security of perfect sizing with respect to system requirements. Several devices can be managed in an optimal way, as if they were a single fully modulating machine. The Modus can connect up to 10 producers in series and can be further combined with each other. Sensei: even better. Cascade management becomes smarter, with a single connector that connects up to 24 luminaires and a new IP addressing system for Master-Slave management, functional for a uniform distribution of the workload among all the luminaires that make up the module . Internal Sensei Infinity Sensei series 26 litres/min condensing is an instantaneous domestic hot water producer for indoor installation. Rinnai patented R-Evolution heat exchanger, new metal fiber burner, zero governor valve, full condensation. Anti-corrosion and anti-freeze enamelled galvanized steel casing included as standard up to -20°C. Like all condensing models, N26i is compatible with Rinnai Modus systems for easy installation of multiple appliances in medium and large professional systems. For domestic use, with the first ignition free of charge by an authorized technician, Rinnai offers a free 4-year warranty extension. Energy efficiency class A. Unlimited hot water without sudden changes in temperature Flow regulator: constant temperature as the flow varies Temperature control to degree For domestic use, free initial test with free warranty extension, by an authorized Rinnai Technician Electronic ignition without pilot flame Control panel on the bridge for managing the water temperature. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

NB: Made to order (10 working days) Rinnai Infinity N26I indoor condensing water heater Complete with flue gas kit REU-N2635FFC-E-NG Methane - NEW Internal installation Dimensions (H x W x D) (mm) 670x470x276 Energy Class A XL profile Max Hydraulic Flow Δt 25°C (l/min) 26 l/min Frontal Display Thermoregulation Can be cascaded Yes Internal installation / Villa - Apartment with multifunctional shower, hydromassage / Professional installation sensei Rinnai presents Infinity Sensei, the masters of condensation, the brand new range of instant gas condensing water heaters of 26 and 32 litres/minute, for indoors or outdoors. Ultra performing on their own, perfect in cascade installations, where they express all their potential by satisfying even the most important hot water production needs in commercial premises, accommodation facilities, production plants and much more. Condensation is ECO-SUSTAINABLE TECHNOLOGY In condensing technology, the water vapor contained in the combustion products is also used to generate heat. For this reason, the Infinity Sensei series condensing water heaters reduce consumption by up to 30% and polluting emissions (NOx and CO₂) by up to 70%. DID YOU KNOW THAT? In professional applications, only the condensing sanitary production is compliant with the law. The Ministerial Decree "Minimum requirements" of 6/26/2015 regulates both heating and the production of domestic hot water, also called, like heating, to respect a minimum efficiency on the PCI equal to 90 + 2 log Pn . This value can only be reached with condensation . From the entry into force of the decree, in order to have parameters of polluting emissions and energy efficiency compliant with the legislation, all economic entities that use hot water professionally must use gas-fired producers only of the condensing type in all cases ( replacement, renovation and new construction). The Infinity Sensei condensing water heaters they are perfectly compatible with renewable sources they can manage up to 4 additional remote commands for temperature control from different points of use have an increasingly user-friendly electronic board, which allows you to set and monitor the operating parameters directly from the standard remote control. The Technician can activate the Service Soon parameter, a warning signal for scheduled maintenance, functional to guarantee the periodicity of the assistance interventions, which preserve the longevity of the systems. Optimal combustion, even in the mountains The Infinity SENSEI condensing appliances, like all the new Rinnai water heaters, are equipped with the high altitude function that the technician can set in addition to the 900m altitude where the air is rarefied. Installation in cascade and in Modus Infinity Sensei for indoor or outdoor use can be connected to each other in certified turnkey systems that allow all the security of perfect sizing with respect to system requirements. Several devices can be managed in an optimal way, as if they were a single fully modulating machine. The Modus can connect up to 10 producers in series and can be further combined with each other. Sensei: even better. Cascade management becomes smarter, with a single connector that connects up to 24 luminaires and a new IP addressing system for Master-Slave management, functional for a uniform distribution of the workload among all the luminaires that make up the module . Internal Sensei Infinity Sensei series 26 litres/min condensing is an instantaneous domestic hot water producer for indoor installation. Rinnai patented R-Evolution heat exchanger, new metal fiber burner, zero governor valve, full condensation. Anti-corrosion and anti-freeze enamelled galvanized steel casing included as standard up to -20°C. Like all condensing models, N26i is compatible with Rinnai Modus systems for easy installation of multiple appliances in medium and large professional systems. For domestic use, with the first ignition free of charge by an authorized technician, Rinnai offers a free 4-year warranty extension. Energy efficiency class A. Unlimited hot water without sudden changes in temperature Flow regulator: constant temperature as the flow varies Temperature control to degree For domestic use, free initial test with free warranty extension, by an authorized Rinnai Technician Electronic ignition without pilot flame Control panel on the bridge for managing the water temperature. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Technical features Code : REU-A1420FFU-LPG Type of Installation : Internal Device typology : C Energy class: A Load profile : L Performance Thermal Capacity (kW) min 4.1 / Max 27.2 Hydraulic flow rate (l/min) min 2 l/min MAX 14 l/min (20 l/min ∆T=15°C) Max temperature that can be set (°C) 65 Minimum activation pressure (bar) 0.1 Nominal operating pressure (bar) min 1 Max 8.30 Max number of additional controls that can be installed 3 Electricity consumption (W) Normal 55 W Stand-by 1.5 W Antifreeze 116 W Predisposition for connection with recirculation yes Arrangement for integration with solar yes Fittings and flue Ø 60/100 coax flue, max discharge distance 5m+3 bends, divisible Ø 80/80. Male outlet. See the 'accessories' section Water Inlet: ½” Water Outlet: ½” Gas ½” Standard antifreeze, down to -15°C LPG supply Dimensions Dimensions ( LxWxH ) : 373 x 173 x 541 mm Weight : 14.5Kg INFINITY The 17 litres/min Infinity 17i water heater is a domestic instantaneous water heater to be installed inside the home. It produces hot water only in response to a real request (only when the tap is opened). Unlike a kettle, it does not need to store large quantities of water at high temperatures. This allows for great savings in terms of energy costs and water consumption . No need to mix the water, which immediately comes out at the desired temperature. NEW The installer can select the "high altitude" setting to ensure maximum performance of the water heater even when installed in the high mountains, in rarefied air conditions NEW When the water heater and the utilities are distant and heat dispersions are generated, the installer can correct the temperature according to the degree of use (from +1°C to +3°C) by perfecting the temperature at the tap NEW A progressive alert signals any limescale deposits. This allows cleaning to be carried out before the level is such as to cause a malfunction. Instantaneous gas-fired domestic hot water producer for indoor installation. Equipped with a control panel on the dashboard for managing the temperature, the degree and self-diagnosis. Anti-corrosion enamelled galvanized steel casing. Like all Rinnai water heaters, the new Infinity control the temperature to the degree and optimize comfort in the name of energy savings Temperature refinement to degree at point of use When the water heater is far from the utilities and the pipes generate heat dispersion, it is possible to correct the temperature at the tap from +1°C to +3°C Are you a home user? Register your new water heater on rinnai.it in the appropriate section to extend the warranty of your water heater to 4 years free of charge* The warranty extension (valid only on spare parts) can be requested on domestic water heaters. Consult the technical manuals to find out the details of the initiative. AT OUR HOME WE ARE FREE TO BE OURSELVES Rinnai responds to the different needs of hot water. A product available in different sizes 14 or 17 litres/minute. A studio flat, an apartment, one or more people living together. Always, an appliance that takes up very little space and offers endless hot water, giving way to what matters most Characteristics Unlimited hot water without sudden changes in temperature Electronic ignition without pilot flame Temperature control to the degree via the series controller Flow regulator: constant temperature as the flow varies Integrated automatic reset as standard Progressive LC code that detects any limescale deposits Free warranty extension on rinnai.it Functions Can be combined with solar panels Can be combined with recirculation Can be combined with max storage tank lt 500 Max 3 additional remote controls High Altitude Function Ultrathin Standard antifreeze up to -15°C Perfect temperature despite dispersions** Eco friendly Product Guarantee: All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

NB: Made to order (10 working days) Rinnai Infinity N26I indoor condensing water heater Complete with smoke outlet kit REU-N2635FFC-E-LPG LPG - NEW Internal installation Dimensions (H x W x D) (mm) 670x470x276 Energy Class A XL profile Max Hydraulic Flow Δt 25°C (l/min) 26 l/min Frontal Display Thermoregulation Can be cascaded Yes Internal installation / Villa - Apartment with multifunctional shower, hydromassage / Professional installation sensei Rinnai presents Infinity Sensei, the masters of condensation, the brand new range of instant gas condensing water heaters of 26 and 32 litres/minute, for indoors or outdoors. Ultra performing on their own, perfect in cascade installations, where they express all their potential by satisfying even the most important hot water production needs in commercial premises, accommodation facilities, production plants and much more. Condensation is ECO-SUSTAINABLE TECHNOLOGY In condensing technology, the water vapor contained in the combustion products is also used to generate heat. For this reason, the Infinity Sensei series condensing water heaters reduce consumption by up to 30% and polluting emissions (NOx and CO₂) by up to 70%. DID YOU KNOW THAT? In professional applications, only the condensing sanitary production is compliant with the law. The Ministerial Decree "Minimum requirements" of 6/26/2015 regulates both heating and the production of domestic hot water, also called, like heating, to respect a minimum efficiency on the PCI equal to 90 + 2 log Pn . This value can only be reached with condensation . From the entry into force of the decree, in order to have parameters of polluting emissions and energy efficiency compliant with the legislation, all economic entities that use hot water professionally must use gas-fired producers only of the condensing type in all cases ( replacement, renovation and new construction). The Infinity Sensei condensing water heaters they are perfectly compatible with renewable sources they can manage up to 4 additional remote commands for temperature control from different points of use have an increasingly user-friendly electronic board, which allows you to set and monitor the operating parameters directly from the standard remote control. The Technician can activate the Service Soon parameter, a warning signal for scheduled maintenance, functional to guarantee the periodicity of the assistance interventions, which preserve the longevity of the systems. Optimal combustion, even in the mountains The Infinity SENSEI condensing appliances, like all the new Rinnai water heaters, are equipped with the high altitude function that the technician can set in addition to the 900m altitude where the air is rarefied. Installation in cascade and in Modus Infinity Sensei for indoor or outdoor use can be connected to each other in certified turnkey systems that allow all the security of perfect sizing with respect to system requirements. Several devices can be managed in an optimal way, as if they were a single fully modulating machine. The Modus can connect up to 10 producers in series and can be further combined with each other. Sensei: even better. Cascade management becomes smarter, with a single connector that connects up to 24 luminaires and a new IP addressing system for Master-Slave management, functional for a uniform distribution of the workload among all the luminaires that make up the module . Internal Sensei Infinity Sensei series 26 litres/min condensing is an instantaneous domestic hot water producer for indoor installation. Rinnai patented R-Evolution heat exchanger, new metal fiber burner, zero governor valve, full condensation. Anti-corrosion and anti-freeze enamelled galvanized steel casing included as standard up to -20°C. Like all condensing models, N26i is compatible with Rinnai Modus systems for easy installation of multiple appliances in medium and large professional systems. For domestic use, with the first ignition free of charge by an authorized technician, Rinnai offers a free 4-year warranty extension. Energy efficiency class A. Unlimited hot water without sudden changes in temperature Flow regulator: constant temperature as the flow varies Temperature control to degree For domestic use, free initial test with free warranty extension, by an authorized Rinnai Technician Electronic ignition without pilot flame Control panel on the bridge for managing the water temperature. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ATTENTION The product is available to order! Rinnai Infinity N32I indoor condensing water heater Complete with flue gas kit REU-N3237FFC-E-NG Methane - NEW Internal installation Dimensions (H x W x D) (mm) 670x470x276 Energy Class A XXL profile Max hydraulic flow rate Δt 25°C (l/min) 32 l/min Frontal Display Thermoregulation Can be cascaded Yes Internal installation / Villa - Apartment with multifunctional shower, hydromassage / Professional installation sensei Rinnai presents Infinity Sensei, the masters of condensation, the brand new range of instant gas condensing water heaters of 26 and 32 litres/minute, for indoors or outdoors. Ultra performing on their own, perfect in cascade installations, where they express all their potential by satisfying even the most important hot water production needs in commercial premises, accommodation facilities, production plants and much more. Condensation is ECO-SUSTAINABLE TECHNOLOGY In condensing technology, the water vapor contained in the combustion products is also used to generate heat. For this reason, the Infinity Sensei series condensing water heaters reduce consumption by up to 30% and polluting emissions (NOx and CO₂) by up to 70%. DID YOU KNOW THAT? In professional applications, only the condensing sanitary production is compliant with the law. The Ministerial Decree "Minimum requirements" of 6/26/2015 regulates both heating and the production of domestic hot water, also called, like heating, to respect a minimum efficiency on the PCI equal to 90 + 2 log Pn . This value can only be reached with condensation . From the entry into force of the decree, in order to have parameters of polluting emissions and energy efficiency compliant with the legislation, all economic entities that use hot water professionally must use gas-fired producers only of the condensing type in all cases ( replacement, renovation and new construction). The Infinity Sensei condensing water heaters they are perfectly compatible with renewable sources they can manage up to 4 additional remote commands for temperature control from different points of use have an increasingly user-friendly electronic board, which allows you to set and monitor the operating parameters directly from the standard remote control. The Technician can activate the Service Soon parameter, a warning signal for scheduled maintenance, functional to guarantee the periodicity of the assistance interventions, which preserve the longevity of the systems. Optimal combustion, even in the mountains The Infinity SENSEI condensing appliances, like all the new Rinnai water heaters, are equipped with the high altitude function that the technician can set in addition to the 900m altitude where the air is rarefied. Installation in cascade and in Modus Infinity Sensei for indoor or outdoor use can be connected to each other in certified turnkey systems that allow all the security of perfect sizing with respect to system requirements. Several devices can be managed in an optimal way, as if they were a single fully modulating machine. The Modus can connect up to 10 producers in series and can be further combined with each other. Sensei: even better. Cascade management becomes smarter, with a single connector that connects up to 24 luminaires and a new IP addressing system for Master-Slave management, functional for a uniform distribution of the workload among all the luminaires that make up the module . Internal Sensei Infinity Sensei series 26 litres/min condensing is an instantaneous domestic hot water producer for indoor installation. Rinnai patented R-Evolution heat exchanger, new metal fiber burner, zero governor valve, full condensation. Anti-corrosion and anti-freeze enamelled galvanized steel casing included as standard up to -20°C. Like all condensing models, N26i is compatible with Rinnai Modus systems for easy installation of multiple appliances in medium and large professional systems. For domestic use, with the first ignition free of charge by an authorized technician, Rinnai offers a free 4-year warranty extension. Energy efficiency class A. Unlimited hot water without sudden changes in temperature Flow regulator: constant temperature as the flow varies Temperature control to degree For domestic use, free initial test with free warranty extension, by an authorized Rinnai Technician Electronic ignition without pilot flame Control panel on the bridge for managing the water temperature. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Gas Water Heater RINNAI ONE 11i Methane With Smoke Kit REU-A1111FFU-NG - NEW ONE 11i Internal forced flow sealed chamber CODE REU-A1111FFU-NG (methane gas or propane air) Profile / Energy class A+ S Annual electricity consumption (kWh/annum) 7 Noise level indoors (dB) 59 Indoor installation - Apartments Device typology Forced flow - Type C Dimensions (mm) 541x373x173 Weight (Kg) 14 Natural gas heat input Min/Max (kW) 4.10/21.3 Water flow ∆t 25°C (l/min) 11 Max* water flow (l/min) 11 Max operating temperature (°C) 65 Minimum activation pressure (bar) 0.1 Rated operating pressure Min/Max (bar) 1/8.3 Electricity consumption normal / stand-by / antifreeze (W) 40 / 1.5 / 116 Standard antifreeze up to 15° RINNAI ONE The brand new 11 litres/min ONE water heater is the instant domestic water heater to be installed inside the home (for example in the boiler room, in the bathroom, between the kitchen cupboards). Instantaneous gas-fired domestic hot water producer for indoor installation. Equipped with display for temperature management per degree and self-diagnosis. Anti-corrosion enamelled galvanized steel casing. produces hot water only when needed (only when a tap is opened) does not waste energy (because it does not have to maintain any stock of hot water) avoids the risk of formation of the Legionella bacterium , thanks to the absence of stagnation N.1 in efficiency and eco-sustainability: energy efficiency class A+ , guarantees a quick installation also thanks to the compact dimensions it has a progressive LC code which signals any limescale deposits and allows for preventive action it has a control panel on the machine to which up to 3 accessory controls can be connected, to manage the temperature from any point of use, such as in the kitchen or bathroom and immediately have hot water at the desired degree offers the possibility of perfecting the temperature at the tap: from +1°C to +3°C, if there are distances between the water heater and the utilities which cause heat loss Shape memory alloy: the membrane inside the water unit changes shape according to the temperature, determining the flow of water in transit and the outlet temperature Characteristics Can be combined with solar panels Can be combined with recirculation Can be combined with max storage tank lt 500 Max 3 additional remote controls Standard antifreeze down to -15°C Ultrathin Eco friendly Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Gas Water Heater RINNAI ONE 11i LPG With Smoke Kit REU-A1111FFU-LPG - NEW ONE 11i Internal forced flow sealed chamber CODE REU-A1111FFU-LPG Profile / Energy class A+ S Annual electricity consumption (kWh/annum 7 Noise level indoors (dB) 59 Indoor installation - Apartments Device typology Forced flow - Type C Dimensions (mm) 541x373x173 Weight (Kg) 14 Natural gas heat input Min/Max (kW) 4.10/21.3 Water flow ∆t 25°C (l/min) 11 Max* water flow (l/min) 11 Max operating temperature (°C) 65 Minimum activation pressure (bar) 0.1 Rated operating pressure Min/Max (bar) 1/8.3 Electricity consumption normal / stand-by / antifreeze (W) 40 / 1.5 / 116 Standard antifreeze up to 15° RINNAI ONE The brand new 11 litres/min ONE water heater is the domestic instantaneous water heater to be installed inside the home (for example in the boiler room, in the bathroom, between the kitchen cupboards). Instantaneous gas-fired domestic hot water producer for indoor installation. Equipped with display for temperature management per degree and self-diagnosis. Anti-corrosion enamelled galvanized steel casing. produces hot water only when needed (only when a tap is opened) does not waste energy (because it does not have to maintain any stock of hot water) avoids the risk of formation of the Legionella bacterium , thanks to the absence of stagnation N.1 in efficiency and eco-sustainability: energy efficiency class A+ , guarantees a quick installation also thanks to the compact dimensions it has a progressive LC code which signals any limescale deposits and allows for preventive action it has a control panel on the machine to which up to 3 accessory controls can be connected, to manage the temperature from any point of use, such as in the kitchen or in the bathroom and immediately have hot water at the desired degree offers the possibility of perfecting the temperature at the tap: from +1°C to +3°C, if there are distances between the water heater and the utilities which cause heat loss Shape memory alloy: the membrane inside the water unit changes shape according to the temperature, determining the flow of water in transit and the outlet temperature Characteristics Can be combined with solar panels Can be combined with recirculation Can be combined with max storage tank lt 500 Max 3 additional remote controls Standard antifreeze down to -15°C Ultrathin Eco friendly Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less