Riello Mini 13 LN Low NOx sealed chamber water heater complete with methane fume exhaust kit Sanitary energy efficiency: Class A Load profile: L profile Forced draft sealed chamber PNominal heat input 25 kW Useful efficiency at max-min power: 91.8-84.0% Min/normal/max pressure bar 0.15/2/10 Domestic hot water production: 13 l/min Min. withdrawal: 2.5 l/min Power supply V/Hz 230/50 Electrical protection degree IP X4D Dimensions Dimensions (HxWxD): 642×340×237 mm Weight: 18Kg RIELLO MINI From RIELLO technological research comes MINI LN, the new line of low-emission instantaneous water heaters with sealed chamber, completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with recent European regulations to reduce NOx emissions. The new aesthetic, elegant and linear, and the compact dimensions, allow the integration of this product in any living environment. This feature represents the ideal solution for responding to any domestic hot water production need. Prepared for installation inside the home, the new water heaters can also be installed outside, in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10° c. Latest generation burner with reduced NOx emissions The new RIELLO MINI LN line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or less than 56 mg /kWh. The innovative hyperstoichiometric type burner allows the flame to be fed by a greater air-gas mixture than that required for combustion, resulting in a very low flame temperature. This characteristic, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by the legislation with flying colors international. The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. The technology and the advantages of the range Innovative hyperstoichiometric and cooled burner with low emissions Wide flame modulation which allows excellent stability of the domestic hot water delivery temperature, even with minimum withdrawals Electronic ignition and ionization flame control Wide flame modulation (1 : 3) which allows perfect stability of the domestic hot water delivery temperature, even with minimum withdrawals Brand new user interface with backlit display with icons and 4 keys, to easily navigate the menu and make adjustments Abundant domestic hot water production: 11, 13 or 17 litres/min Even more compact dimensions and simple installation Mounting template and power cable supplied. Instantaneous sealed chamber water heater with methane and LPG versions Many new functions in a linear and modern design new RIELLO Mini LN are characterized by the new electronics which, combined with the modern and linear design, results in a new control panel, simple and intuitive, with many additional and innovative functions. Through a large backlit digital display (40x60 mm) and 4 command keys, the user can manage all the functions of the water heater and navigate easily in the menu. The icon language of the display makes both the general setting of the appliance and the setting of the special functions particularly intuitive, as well as immediately displaying the diagnostics of any anomalies. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Scaldabagno a Gas Ferroli KONA 17 litri camera stagna completo di kit fumi low NOx Metano Classe ERP A Profilo di carico XL Portata termica nominale Max kW 33 Potenza termica Max / Min kW 30/3,6 Classe NOx (secondo EN 15502) 6 Pressione massima di esercizio bar 10 Produzione sanitaria massima Δt 25°Δt 30° l/min  17 / 14,3 Regolazione temperatura sanitaria Min / Max °C 40 / 65 Peso a vuoto Kg 14,5  Alimentazione elettrica V/Hz 230 / 50 Dimensioni LxAxP mm 370x525x190 Scaldacqua a gas Ferroli EFFICACI La gamma ECO è stata progettata secondo i severi parametri di efficienza della Direttiva Europea ErP. In pratica, sono in grado di produrre molta acqua calda a costo contenuto, rispettando l’ambiente e con emissioni inquinanti minime. Possono inoltre essere integrati su di un impianto solare termico con estrema semplicità per la massima efficienza e comfort.FACILI Gli scaldacqua ECO sono estremamente semplici da installare e sono intercambiabili con le precedenti serie. Seppur di dimensioni molto compatte, sono stati pensati e costruiti in modo da poter accedere facilmente ai componenti interni per una manutenzione agevole.BELLI E SMART I designer del progetto ECO hanno realizzato un’estetica «friendly» facilmente integrabile con i più diversi stili di arredamento. I comandi a manopola o a tasti sono stati pensati per essere di facile utilizzo e di immediata comprensione. Tutti gli scaldacqua a gas Ferroli sono dotati di display di interfaccia con l’utente.SUN EASY Facile... Economico... Geniale Pegaso Eco e Kona sono stati progettati per poter essere facilmente integrati con i sistemi solari termici, a circolazione naturale o forzata. La temperatura dell’acqua proveniente dal circuito solare è costantemente monitorata ed il bruciatore dello scaldacqua viene acceso solo nel caso in cui non sia sufficientemente caldaECO La funzione ECO degli scaldacqua consente di fissare la temperatura dell’acqua calda (42°C) ad un livello ideale per il massimo comfort e contemporaneamente a ridurre la potenza massima dell’apparecchio (80% Pmax). Entrambi i parametri della funzione ECO sono modificabili in funzione delle esigenze e delle abitudini dell’utente KONA Scaldacqua murale a gas, a tiraggio forzato e camera stagna, di tipo Low NOx Scambiatore in rame Per installazioni interne ed esterne in luoghi parzialmente protetti Funzione antigelo con kit resistenze (opzionali) con soglia di intervento a 5° C Interfaccia display e comandi touch Modulazione di potenza Funzionamento a metano, gpl ed aria propanata Bruciatore Low NOx - Classe 6 Compatibile con gli impianti solari Funzione ECO  Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto  

Read more less

Scaldabagno a Gas Ferroli KONA 17 litri camera stagna completo di kit fumi low NOx Gpl Classe ERP A Profilo di carico XL Portata termica nominale Max kW 33 Potenza termica Max / Min kW 30/3,6 Classe NOx (secondo EN 15502) 6 Pressione massima di esercizio bar 10 Produzione sanitaria massima Δt 25°Δt 30° l/min  17 / 14,3 Regolazione temperatura sanitaria Min / Max °C 40 / 65 Peso a vuoto Kg 14,5  Alimentazione elettrica V/Hz 230 / 50 Dimensioni LxAxP mm 370x525x190 Scaldacqua a gas Ferroli EFFICACI La gamma ECO è stata progettata secondo i severi parametri di efficienza della Direttiva Europea ErP. In pratica, sono in grado di produrre molta acqua calda a costo contenuto, rispettando l’ambiente e con emissioni inquinanti minime. Possono inoltre essere integrati su di un impianto solare termico con estrema semplicità per la massima efficienza e comfort.FACILI Gli scaldacqua ECO sono estremamente semplici da installare e sono intercambiabili con le precedenti serie. Seppur di dimensioni molto compatte, sono stati pensati e costruiti in modo da poter accedere facilmente ai componenti interni per una manutenzione agevole.BELLI E SMART I designer del progetto ECO hanno realizzato un’estetica «friendly» facilmente integrabile con i più diversi stili di arredamento. I comandi a manopola o a tasti sono stati pensati per essere di facile utilizzo e di immediata comprensione. Tutti gli scaldacqua a gas Ferroli sono dotati di display di interfaccia con l’utente.SUN EASY Facile... Economico... Geniale Pegaso Eco e Kona sono stati progettati per poter essere facilmente integrati con i sistemi solari termici, a circolazione naturale o forzata. La temperatura dell’acqua proveniente dal circuito solare è costantemente monitorata ed il bruciatore dello scaldacqua viene acceso solo nel caso in cui non sia sufficientemente caldaECO La funzione ECO degli scaldacqua consente di fissare la temperatura dell’acqua calda (42°C) ad un livello ideale per il massimo comfort e contemporaneamente a ridurre la potenza massima dell’apparecchio (80% Pmax). Entrambi i parametri della funzione ECO sono modificabili in funzione delle esigenze e delle abitudini dell’utente KONA Scaldacqua murale a gas, a tiraggio forzato e camera stagna, di tipo Low NOx Scambiatore in rame Per installazioni interne ed esterne in luoghi parzialmente protetti Funzione antigelo con kit resistenze (opzionali) con soglia di intervento a 5° C Interfaccia display e comandi touch Modulazione di potenza Funzionamento a metano, gpl ed aria propanata Bruciatore Low NOx - Classe 6 Compatibile con gli impianti solari Funzione ECO  Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto  

Read more less

Scaldabagno a Gas Ferroli PEGASO ECO 14 camera aperta low NOx Metano PEGASO ECO 14 Classe ERP A Profilo di carico M  Portata termica nominale Max kW 26,8 Potenza termica Max / Min kW23,8/9,3 Classe NOx (secondo EN 15502) 6 Pressione massima di esercizio bar 10 Produzione sanitaria massima Δt 25°C Δt  13,6 Regolazione temperatura sanitaria Min / Max °C 40 / 65 Peso a vuoto Kg 9,5 Alimentazione elettrica Pila Dimensioni AxLxP mm 550x330x180 Scaldacqua a gas Ferroli EFFICACI La gamma ECO è stata progettata secondo i severi parametri di efficienza della Direttiva Europea ErP. In pratica, sono in grado di produrre molta acqua calda a costo contenuto, rispettando l’ambiente e con emissioni inquinanti minime. Possono inoltre essere integrati su di un impianto solare termico con estrema semplicità per la massima efficienza e comfort. FACILI Gli scaldacqua ECO sono estremamente semplici da installare e sono intercambiabili con le precedenti serie. Seppur di dimensioni molto compatte, sono stati pensati e costruiti in modo da poter accedere facilmente ai componenti interni per una manutenzione agevole. BELLI E SMART I designer del progetto ECO hanno realizzato un’estetica «friendly» facilmente integrabile con i più diversi stili di arredamento. I comandi a manopola o a tasti sono stati pensati per essere di facile utilizzo e di immediata comprensione. Tutti gli scaldacqua a gas Ferroli sono dotati di display di interfaccia con l’utente.SUN EASY Facile... Economico... Geniale Pegaso Eco e Kona sono stati progettati per poter essere facilmente integrati con i sistemi solari termici, a circolazione naturale o forzata. La temperatura dell’acqua proveniente dal circuito solare è costantemente monitorata ed il bruciatore dello scaldacqua viene acceso solo nel caso in cui non sia sufficientemente caldaECO La funzione ECO degli scaldacqua consente di fissare la temperatura dell’acqua calda (42°C) ad un livello ideale per il massimo comfort e contemporaneamente a ridurre la potenza massima dell’apparecchio (80% Pmax). Entrambi i parametri della funzione ECO sono modificabili in funzione delle esigenze e delle abitudini dell’utente PEGASO ECO Scaldacqua murale a gas, a tiraggio naturale e camera stagna, di tipo Low NOx Scambiatore in rame Per installazioni interne Interfaccia display Modulazione di potenza Funzionamento a metano, gpl ed aria propanata Bruciatore Low NOx - Classe 6 Compatibile con gli impianti solari Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto

Read more less

Water heater Open chamber water heater Ariston FAST RX 14 lt low NOx LPG cod. 3632415 new model LPG product code: 3632415 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: L profile Characteristics of heating/DHW operation: Gas category II2H3+ Type B11bs Open chamber with natural draft DC 3.0V battery power supply Nominal heat input: 27 kW Minimum thermal input: 10.5 kW Maximum nominal pressure: 10 bar Minimum operating pressure: 0.2 bar Minimum operating flow: 3 l/min Nominal flow rate (ΔT 25°C): 14 l/min Smoke temperature at maximum flow rate: 170°C Nox emissions: 48.5 mg/kWh Minimum ambient temperature of use: 5°C Sound power: 64dB(A) Dimensions (HxWxD): 617 x 370 x 210 mm ; 10.2kg Power supply: LPG Warranty: 2 years FAST RX Instant, fast, efficient, easy gas water heaters Ariston has just launched its new range of FAST RX instantaneous gas water heaters, with this new range the user will select the ideal temperature with considerable gas and water savings, as it is not necessary to mix it with cold water. Furthermore, FAST RX is easy to use and consumes gas only when it is running. The whole range complies with the ErP 2018 regulation , which requires a lowering of NOx emissions. In addition to great efficiency, the X range stands out for its simplicity of installation, compact dimensions and comfort. Ensuring maximum peace of mind and sanitary comfort is one of Ariston's main objectives, and FAST R represents the ideal solution for any domestic hot water requirement. With the modulation of the electronic thermostat, a great stability of the hot water temperature will be obtained. FAST R heaters work with a minimum water pressure of 0.15 bar, this is achieved by modulating the burner. Counting with smoke sensors, water and flame detectors for maximum safety of use. Characteristics: Low NOx: ErP compliant 09/26/2018 Completely safe High quality components Easy to use Operation even with minimum water flow rates up to 2 l/min Presence of water flow switch for accurate temperature control Internal installation Guaranteed Italian quality EXTERNAL TEMPERATURE REGULATION It allows the user to choose the temperature that best suits his needs. INSTALLATION SIMPLICITY Product easily installed with few elements to connect SIMPLICITY OF MAINTENANCE Single-volume product with easy access to internal components for quick and easy maintenance. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

  Caratteristiche tecniche Modello : SWING PLUS MIX HEATING VE MT 80/5 DX Codice prodotto : E330137I Capacità serbatoio : 78,0 litri Attacco : Destra Efficienza energetica Classe di efficienza energetica : C Profilo di carico : L Performance riscaldamento/sanitario Potenza elettrica : 1200 W Tempo di riscaldamento solo con resistenza elettrica Δt = 45°C : 3h - 45min Tempo di riscaldamento con resistenza elettrica + scambiatore Δt = 45°C : 1h - 45min Dimensioni e peso Altezza : 750 mm Diametro : 440 mm Peso : 26,0 Kg Isea Swing Plus Mix Heating Scaldacqua murale elettrico mistotermo Gli scaldacqua a parete ISEA sono disponibili anche nella versione misto-termo, che prevede un doppio sistema di riscaldamento dell’acqua: quello tradizionale attraverso resistenza elettrica ad immersione e un secondo che sfrutta il calore “recuperato” dall’acqua dell’impianto di riscaldamento centralizzato che scorre in uno scambiatore installato all’interno della caldaia. I due sistemi possono essere impiegati in contemporanea o separatamente. Questa soluzione permette di ottenere un consistente risparmio energetico e una maggiore rapidità nel raggiungimento della temperatura desiderata Gli scaldacqua MIX-HEATING disponogono di 2 diverse fonti di calore per portare l'acqua alla temperatura richiesta. Al riscaldamento attraverso resistenza elettrica, comune a tutti gli altri apparecchi, si aggiunge la possibilità di usufruire del trasferimento termico prodotto dall'acqua calda che scorre all'interno di uno scambiatore in acciaio porcellanato, in ricircolo con l'impianto esterno di riscaldamento. Questo impianto può essere indifferente o il sistema centralizzato che porta l'acqua ai termo caloriferi o un sistema di riscaldamento alternativo ed ecocompatibile come un impianto a pannelli solari. 3 opzioni di funzionamento per ottimizzare al massimo i consumi Sistema di riscaldamento combinato Resistenza + scambiatore Rappresenta il modo più rapido di portare l'acqua del boiler alla giusta temperatura, in quanto le due fonti di calore concorrono insieme ad espletare questa funzione, in questo caso si ottengono tempi rapidissimi di riscaldamento ed un ridotto impiego de l'energia elettrica usata dalla resistenza ad immersione. Riscaldamento solo con scambiatore È questa la soluzione di massima economicità d’esercizio: in questo caso il riscaldamento dell’acqua all’interno del boiler avviene solo per conduzione con l’acqua calda dell’impianto di riscaldamento, condizione sempre presente durante il periodo invernale. Il riscaldamento con scambiatore può rappresentare il sistema ideale anche in estate, nel caso in cui la fonte di calore provenga da un impianto ecocompatibile. Riscaldamento solo con resistenza In estate, in mancanza di impianti alternativi di produzione di energia, lo scaldacqua può essere utilizzato tradizionalmente con il solo impiego della resistenza elettrica. In dotazione Resistenza elettrica estraibile in acciaio inox Controllo termostatico a sonda Anodo di magnesio a protezione del serbatoio Flangia a 5 bulloni per garantire robustezza e facilità di manutenzioni periodiche Indicatore livello temperatura e spia on/off Valvola di sicurezza tarata a 8 bar Regolazione manuale della temperatura esterna per i modelli verticali Garanzia prodotto : La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Ariston monobloc heat pump water heater Nuos Plus 250 code 3069776 A+ Integrated Wi-Fi Technical features Product code: 3069776 Energy label specifications according to the European ErP directive Energy efficiency: Class A+ Characteristics of heating/DHW operation: Nominal accumulation capacity 250 l Maximum capacity of hot water at 40°C l 336 Base positioning Thermal dispersion 22 W Seasonal yield (average climate) 138% Min/max air temperature -7/42°C Sound power 55db Maximum working pressure 6 bar Resistance power 1500+1000 W IPX4 electrical protection Minimum volume of the installation room 30m3 Class A+ XL profile Dimensions HxWxD: 199.7x60x68 Weight 95kg NEW PLUS WI-FI ARISTON monobloc heat pump water heater Model Monobloc on the floor. The heat pump revolution with new standards of efficiency thanks to the use of the heat in the air as a source of renewable energy to obtain greater comfort and high energy savings. * Access the 65% tax deduction for energy redevelopment interventions. The intervention must be carried out in compliance with the requirements requested by the Revenue Agency for energy requalification interventions. General characteristics: Integrated Wifi for management via APP Compatible with Bus BridgeNet for integration with complex systems. Shortest heat-up time in its category. Working range in heat pump with air temperatures from -5 to 42°C. Water temperature up to 62°C with the heat pump only. Sanitary recycling Active anode (protech) + magnesium anode Internal installation First ignition free. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Gas water heater RINNAI INFINITY 17i complete with smoke kit cod. REU-A1720FFU - NEW Code REU-A1720FFU Internal installation Device type C Energy class A Load profile L Available versions Natural gas, LPG, propane air Thermal capacity (kW) min 4.1 / Max 32.40 Hydraulic flow rate (l/min) min 2 l/min MAX 17 l/min (20 l/min ∆T=15°C) Max temperature that can be set (°C) 65 Minimum activation pressure (bar) 0.1 Nominal operating pressure (bar) min 1 Max 8.30 Ø 60/100 coax flue, max discharge distance 5m+3 bends, divisible Ø 80/80. Male outlet. See the 'accessories' section Max number of additional controls that can be installed 3 Electricity consumption (W) Normal 55 W Stand-by 1.5 W Antifreeze 116 W Predisposition for connection with recirculation yes Arrangement for integration with solar yes Standard antifreeze, down to -15°C Dimensions WxDxH 373x173x541 mm INFINITY The 17 litres/min Infinity 17i water heater is a domestic instantaneous water heater to be installed inside the home. It produces hot water only in response to a real request (only when the tap is opened). Unlike a kettle, it does not need to store large quantities of water at high temperatures. This allows for great savings in terms of energy costs and water consumption . No need to mix the water, which immediately comes out at the desired temperature. NEW The installer can select the "high altitude" setting to ensure maximum performance of the water heater even when installed in the high mountains, in rarefied air conditions NEW When the water heater and the utilities are distant and heat dispersions are generated, the installer can correct the temperature according to the degree of use (from +1°C to +3°C) by perfecting the temperature at the tap NEW A progressive alert signals any limescale deposits. This allows cleaning to be carried out before the level is such as to cause a malfunction. Instantaneous gas-fired domestic hot water producer for indoor installation. Equipped with a control panel on the dashboard for managing the temperature, the degree and self-diagnosis. Anti-corrosion enamelled galvanized steel casing. Characteristics Unlimited hot water without sudden changes in temperature Electronic ignition without pilot flame Temperature control to the degree via the series controller Flow regulator: constant temperature as the flow varies Integrated automatic reset as standard Progressive LC code that detects any limescale deposits Free warranty extension on rinnai.it Functions Can be combined with solar panels Can be combined with recirculation Can be combined with max storage tank lt 500 Max 3 additional remote controls High Altitude Function Ultrathin Standard antifreeze up to -15°C Perfect temperature despite dispersions** Eco friendly Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Technical features Energy label specifications according to the European ErP directive DHW sanitary energy efficiency: Class A Declared load profile: XL Annual consumption of electricity (kWh/annum) and fuel (GJ/annum) 8 -18 Characteristics of heating/DHW operation: Code: REU-VCM2837WD-NG Forced flow open chamber Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulation max lt 1000 Can be combined in cascade, max 25 luminaires Standard antifreeze down to -20°C Installation: Outdoor - Villa - Apartment with multifunctional shower/whirlpool and professional installations Dimensions: mm 582x356x235 - 20 Kg Natural gas heat input Min/Max (kW) 2.8/52 Water flow Δt 25°C Min/Max (l/min) 28 l/min Max operating temperature (°C) 85 Minimum activation pressure (bar) 0.1 Min/Max nominal operating pressure (bar) 2.5/10 Electricity consumption normal / stand-by / antifreeze (W) 65 / 2 / 104 IPX5D protection Class NOx5 METHANE version RINNAI GAS WATER HEATER: INFINITY infinite savings and comfort Rinnai Infinity is the line of instantaneous GAS* water heaters, with high efficiency forced flow, for domestic and professional indoor and outdoor use, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Temperature selection per degree via the standard remote control Energy saving Simplicity of design and installation Compact size Superior performance and absolute security Free initial testing, carried out by an authorized Rinnai technical assistance centre Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled galvanized steel shell Frost, thanks to the standard antifreeze on all appliances (including indoors) The STANDARD remote control allows the user to select the desired water temperature with accuracy to the degree, directly from the point of use (when the tap is opened). Energy saving: Rinnai Infinity eliminates any useless waste and ensures real savings: Gas operation guarantees considerably lower costs than electric operation. Compared to a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent net cut in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers or other heat generators, modulating, only when needed and only as much as needed, to reach the set temperature Domestic Range: Superior performance in small denominations The wide domestic range, differentiated in various hydraulic flow rates, allows the user to choose the most suitable appliance for his needs. The compact dimensions and captivating aesthetics also guarantee a harmonious and discreet installation, both inside and outside the home General characteristics INFINITY 11e Infinity 11 outdoor is an instantaneous domestic hot water producer for outdoor installation with electronic temperature management and water flow control. Anti-corrosion enamelled galvanized steel casing and standard control panel with temperature management and self-diagnosis function. Max operating temperature equal to 75° C. Characteristics: Unlimited hot water without sudden changes in temperature Temperature control to the degree via the standard remote control Outdoor installation does not require fumes exhaust Flow regulator: constant temperature as the flow varies Electronic ignition without pilot flame Free initial testing, carried out by an authorized Rinnai technical assistance centre ErP Ready Rinnai's commitment is aimed at an eco-sustainable future. For this reason all our products are "ERP Ready" or already in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies the Directive 2009/ 125/EC aimed at reducing the energy consumption of products through eco-compatible design. The Directive establishes very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements of energy and environmental performance for instruments that use energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energies on final consumption of 20% Since 26 September 2015, appliances for winter air conditioning and domestic hot water production have been accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD or Labeling Directive ( 2010/30/CE ) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to make its contribution to a more eco-sustainable world Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Electric water heater Ariston Accumulation Velis Vls Dune wifi 80 Eu 3626295 80 Liters - NEW Technical features Product code: 3626295 Energy label specifications according to the European ErP directive Energy efficiency: Class B Withdrawal profile: M profile Characteristics of heating/DHW operation: Capacity: 80 litres Installation: Multiposition V/H Power: 1500W Voltage: 230V Heating time (ΔT=45°C): 2.15 Time required for the first shower: 50 min Max working pressure: 8 bar Max operating temperature °C 80 Overall dimensions mm 1065x695 Weight 28.3kg Protection: IPX4 VELIS DUNE WIFI With the Velis Dune WiFi electric water heater, Ariston takes a step forward towards the future: the best technology of the brand and all the innovations introduced with the Velis EVO model are enriched in this model by wi-fi connectivity . Its compactness, installation versatility combined with the typical Ariston construction quality, make it a leading item in the panorama of electric storage water heaters. It is presented here in the version with 100-litre storage tank. Characteristics: Remotely manageable via the AQUA ARISTON NET App Super thin thickness Elegant and exclusive design Multi-function LCD display Multiposition H/V installation First shower available in half the time ECO EVO function Shower Ready function Anti-legionella function Anti-noise enamelled resistance Double magnesium anode ANTI-LEGIONELLA function To ensure maximum safety and hygiene, the new Ariston products with ABS package are equipped with the anti-legionella function which, if this does not happen for 30 consecutive days, heats the stored water up to 65° c. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview RIELLO ACQUAFUN2 14 METHANE WATER HEATER: Open Chamber water heater specifically dedicated to the production of hot water only. Technical specifications Product code: 20019746 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: profileL Characteristics of heating/DHW operation: Useful power - firebox: 23.7 - 27.2 kW Efficiency at max power: 87.1% Open room, natural draught Min/normal/max pressure bar 0.2/2/10 Camppreliev selector max 40C: 6.7£13.6 l/min Domestic hot water production: 14 l/min Dimensions (hxlxp) mm 650 x 363 x 245 ; 12.6 kgs Power supply: METHANE Features list WATERFUN2 Methane gas LPG Open Room Automatic battery start Acquafun Open Chamber water heater for quick and easy installation without electrical connections thanks to battery power supply. It is available in two models: 11 and 14 litres. Characteristics: Automatic ignition by battery (1.5 Volt). Get rid of tension problems. The continuous flame modulation allows the selected temperature to be kept constant as the pressure and water flow vary, optimizing the combination with mechanical and thermostatic mixers. Economizer device to reduce gas consumption. Supplied battery (1.5 Volt €«¦ size C €«¦ half torch). No mains connection required. The economizer chokes the maximum power by 50% to adapt it to the various installations. Thanks to its particularly compact dimensions, it can be installed in homes with particularly limited spaces. ErP: Energy related Products The new European regulations for heat generators ErP is the acronym of "Energy related Products" and the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through a eco-design ("eco-design"). The field of action of this European Directive is extremely broad since up to now it has affected products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 they will also apply to heating products for the production of domestic hot water. Also from the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitory period between the publication of the regulations and their activation throughout the territory of the European Community is necessary to allow the full transposition of the contents by companies and market players. The energy labeling of products for heating domestic hot water production The regulations issued require that all products intended for heating and the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the introduction of the product from the factories to the market. All the products previously introduced, for example present near distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. A new mod to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product, to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as products with 4 - Heat Pump Water Heaters, as well as those on air conditioners, the efficiency data reported for the average climatic range. In addition to the product energy labels, European regulations have also provided for the creation of a system label in the case of creating a plant in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/operates the system (sellers-installers); this faculty was also granted to builders. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Technical features Product code: 3629057 Energy label specifications according to the European ErP directive Energy efficiency: Class A+ Load profile: M profile Characteristics of heating/DHW operation: Monobloc wall mounted water heater COP air 7°C (EN 16147): 2.45 Heating time @ A7°C (EN 16147) h:min: 8:04 Min/max air temperature °C: -5/42 Sound power db(A): 50 Average absorbed electric power W: 250 Maximum quantity of hot water at 40°C: 128 litres Nominal accumulation capacity lt: 110 Maximum working pressure bar: 8 Maximum absorbed voltage/power V/W: 220-240/1550 Resistance power W: 1200 Standard air flow m3 /h: 100-200 Minimum volume of the installation room m3: 20 Empty weight kg: 55 IP24 electrical protection Insulation thickness mm: 41 Diameter of water connections " 1/2 M Minimum storage room temperature °C: 1 Overall dimensions: see the attached image Nuos Evo 80-110 A+ WH  Compact and easy to install, the Nuos Evo A+ heat pump water heater offers great performance and reliability. Ariston's innovation and research have created a water heater capable of using a natural and inexhaustible source of energy: the heat of the air, thus guaranteeing energy efficiency and savings. Nuos Evo is the optimal solution for those with limited space and allows you to save at least 70% of energy compared to a traditional electric boiler. The product is so efficient that it reaches energy class A+, the highest energy class that can be declared starting from September 2017. Working range in heat pump with air temperatures from -5 to 42°C / Ecological gas R134A allows to reach water temperatures up to 62°C in heat pump Condenser wrapped around the boiler (not immersed in water) Low noise (silent function) / Boiler in titanium enamelled steel Supplementary electrical resistance Active anode (protech) + magnesium anode LCD display Functions: green, auto, boost, boost 2, hourly programming of voyage and anti-legionella samples Product for internal installation Green function Function that maximizes energy savings. The water heater works exclusively in heat pump mode, heating domestic water up to 62°C. Boost function Function that reduces the heating times of the water heater to a minimum, increasing sanitary comfort. The machine works simultaneously in heat pump and electrical resistance, speeding up the heating of the water. Once the maximum operating temperature of the heat pump has been exceeded, the electrical resistance continues to heat up to the water set-point temperature. Auto mode Function that allows the best compromise between comfort and savings. The machine optimizes the heat pump and resistance activation logic. Anti-legionella function This function provides for automatic disinfection cycles. On a monthly basis, the machine starts a check and, if necessary, heats the sanitary water up to 65°C, keeping it at this temperature until any bacterial proliferation in the tank is destroyed. Hourly programming of withdrawals This is the function that allows you to program times and water temperatures to your liking. The water heater will reach the chosen temperature at the preferred time (up to two times can be programmed): the process will give priority to heating via the heat pump and, only if necessary, will take place via the electric heaters Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less