Technical features ErP energy class: Class A Nominal heat output: 21.3 kW DHW direct withdrawal range ΔT = 25°C: 2.5 - 11 l/min Forced draft sealed chamber Ignition: electronic Compact dimensions (HxDxL): 600x183x385 mm Power supply: METHANE General characteristics turboMAG plus Extremely compact dimensions Wide modulation range Perfect dispensing temperature stability Design and intuitive touch screen Energy efficiency class up to A depending on the model. Domestic hot water Instantaneous forced draft water heaters, with electronic ignition with wide modulation range and extremely compact dimensions: among the smallest on the market The turboMAG plus water heaters guarantee plenty of hot water immediately, always at a constant temperature and maximum operational safety. Precisely safety is the added value of this range of water heaters. The Vaillant research and development team, which has been focused on ensuring leadership in the sector for over 140 years, has developed turboMAG plus with the target of safety: in fact, 26 control to ensure maximum user reliability. The new turboMAG plus are water heaters equipped with a three-stage combustion system which broaden the modulation range ensuring perfect temperature stability during hot water delivery. A new exchanger raises the performance of the water heater which, in the 11 – 14 – 16 liters per minute versions, offers a flexible choice for every user. turboMAG plus allows 360° installation flexibility: inside apartments and also outside, resisting temperatures down to -15°C (thanks to the antifreeze accessory) and rain (IPX5D approval). A solar kit as an accessory also allows you to pre-heat the incoming water, further reducing gas consumption. turboMAG plus (hot water production) is the new version of forced draught water heaters with DHW flow rates of: 11, 14 and 16 litres/minute running on Natural Gas and LPG. Quality Continuous development since 1874: Vaillant has been accredited for its superior quality Careful selection of components that meet the highest requirements and guarantee perfect functionality Modern Design: The well-designed casing with high-quality appearance that fits perfectly into your home Total safety: 26 safety functions guarantee the functioning of the appliance Water heater interface with touch screen (IMD): Display with maximum water protection IPX5D protection : Tested with water jets up to a maximum of 12.5 l/min from all directions Flexible and efficient Exchanger with high efficiency: Water heating with minimum gas consumption and lower bill consumption Burner with high modulation : Precise regulation of the thermal power in relation to the DHW request Reduced noise thanks to fan modulation : between 2,400 and 4,800 rpm Various DHW production profiles (bath or shower): - Bath filling mode: monitoring of the filling volume - Normal: temperature setting 38-60 °C Simplified replacement: Same flue position and wall bracket, Reduced installation times High comfort 11, 14 & 16 liters of DHW production High modulation 1:4 Maximum temperature stability in DHW supply : Avoid unwanted temperature variations 3 level combustion : High modulation range 25-100% How to be ready for the new EU legislation Ecodesign Directive (ErP) 2015 What will happen from 26 September 2015? From this date it will no longer be possible to produce traditional forced draft boilers. Instead, it will be possible to continue producing condensing boilers and traditional open chamber boilers equipped with high-efficiency pumps and compliant with the new ErP requirements such as emission, noise and efficiency levels. In particular, the installation of traditional open chamber boilers will only be possible to replace old boilers installed in multi-family buildings which discharge the fumes into branched collective flues (CCR). Products placed on the market before 09/26/2015 that do not comply with the requirements of the new directive, such as traditional forced draft boilers and boilers not equipped with a high efficiency pump, can still be purchased, sold and installed. ErP and ELD: what do they mean and how are they different? ErP : The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive is aimed at two categories of products relevant to installers and resellers in the sector: - Category 1 includes space heating appliances; in particular: electrical, gas and diesel appliances such as boilers, heat pumps and cogenerators. - Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel such as water heaters, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres. ELD: in addition to the ErP directive, the EU has also introduced mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and the production of domestic hot water are labeled with an indication of their energy efficiency class. By combining the products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label. When and how will the new rules apply? On 26 September 2015 the new rules will come into effect. Until then, neither manufacturers, retailers or installers have to comply with the new Ecodesign or labeling provisions. Once the new rules come into effect, manufacturers will only be able to manufacture products that comply with the new Ecodesign requirements, and will be required to supply an energy label with the products What do the new rules mean for the end customer? Unlike household appliances, energy labels on heating and domestic hot water products and systems can only offer a first orientation and will not necessarily provide the best solution for a certain type of installation, nor will they give indications on the assumed cost of energy when obtains a high energy classification. For example, it is not said that a heat pump which presumably will have a higher efficiency class than a condensing boiler can then actually be used in a given type of building. This is why the advice of a competent technician is still necessary to understand the label and select the best product or system that best meets the needs of your building. Product Guarantee   All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : TurboMAG Plus Code : 0010016030 Power supply: methane Performance ErP energy class: Class A Nominal heat output: 31 kW DHW direct withdrawal range ΔT = 25°C : 2.5 - 16 l/min Forced draft sealed chamber Ignition: electronic Dimensions Compact dimensions (HxWxD): 600x410x185 mm Vaillant TurboMAG Plus water heater Quietness, Flexibility and Absolute Quality Vaillant turboMAG gas water heaters are the result of careful studies and careful planning. Each water heater is constantly monitored right from the assembly stage to ensure maximum reliability, great performance and always guarantee maximum comfort and significant energy savings. TurboMAG Plus Forced draught instantaneous water heaters, with electronic ignition with wide modulation range and extremely compact dimensions: among the smallest on the market Extremely compact dimensions Wide modulation range Perfect dispensing temperature stability Design and intuitive touch screen Energy efficiency class up to A depending on the model. Domestic hot water The turboMAG plus water heaters guarantee plenty of hot water immediately, always at a constant temperature and maximum operational safety. Precisely safety is the added value of this range of water heaters. The Vaillant research and development team, which has been focused on ensuring leadership in the sector for over 140 years, has developed turboMAG plus with the target of safety: in fact, 26 control to ensure maximum user reliability. The new turboMAG plus are water heaters equipped with a three-stage combustion system which broaden the modulation range ensuring perfect temperature stability during hot water delivery. A new exchanger raises the performance of the water heater which, in the 11 – 14 – 16 liters per minute versions, offers a flexible choice for every user. turboMAG plus allows 360° installation flexibility: inside apartments and also outside, resisting temperatures down to -15°C (thanks to the antifreeze accessory) and rain (IPX5D approval). A solar kit as an accessory also allows you to pre-heat the incoming water, further reducing gas consumption. turboMAG plus (hot water production) is the new version of forced draught water heaters with DHW flow rates of: 11, 14 and 16 litres/minute running on Natural Gas and LPG . Quality Continuous development since 1874: Vaillant has been accredited for its superior quality Careful selection of components that meet the highest requirements and guarantee perfect functionality Modern Design: The well-designed casing with high-quality appearance that fits perfectly into your home Total safety: 26 safety functions guarantee the functioning of the appliance Water heater interface with touch screen (IMD): Display with maximum water protection IPX5D protection: Tested with water jets up to a maximum of 12.5 l/min from all directions Flexible and efficient Exchanger with high efficiency: Water heating with minimum gas consumption and lower bill consumption Burner with high modulation: Precise regulation of the thermal power in relation to the DHW request Reduced noise thanks to fan modulation: between 2,400 and 4,800 rpm Various DHW production profiles (bath or shower): Bath filling mode: monitoring of the filling volume Normal temperature setting 38-60°C Simplified replacement: Same flue position and wall bracket, Reduced installation times High comfort 11, 14 & 16 liters of DHW production High modulation 1:4 Maximum temperature stability in DHW supply: Avoid unwanted temperature variations 3-level combustion: High modulation range 25-100% Ecodesign Directive (ErP) 2015 How to be ready for new EU legislation What will happen from 26 September 2015? From this date it will no longer be possible to produce traditional forced draft boilers. Instead, it will be possible to continue producing condensing boilers and traditional open chamber boilers equipped with high-efficiency pumps and compliant with the new ErP requirements such as emission, noise and efficiency levels. In particular, the installation of traditional open chamber boilers will only be possible to replace old boilers installed in multi-family buildings which discharge the fumes into branched collective flues (CCR). Products placed on the market before 09/26/2015 that do not comply with the requirements of the new directive, such as traditional forced draft boilers and boilers not equipped with a high efficiency pump, can still be purchased, sold and installed. ErP and ELD: what do they mean and how are they different? ErP : The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive is aimed at two categories of products relevant to installers and resellers in the sector: - Category 1 includes space heating appliances; in particular: electrical, gas and diesel appliances such as boilers, heat pumps and cogenerators. - Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel such as water heaters, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres.  ELD: in addition to the ErP directive, the EU has also introduced mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and the production of domestic hot water are labeled with an indication of their energy efficiency class. By combining the products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label. When and how will the new rules apply? On 26 September 2015 the new rules will come into effect. Until then, neither manufacturers, retailers or installers have to comply with the new Ecodesign or labeling provisions. Once the new rules come into effect, manufacturers will only be able to manufacture products that comply with the new Ecodesign requirements, and will be required to supply an energy label with the products What do the new rules mean for the end customer? Unlike household appliances, energy labels on heating and domestic hot water products and systems can only offer a first orientation and will not necessarily provide the best solution for a certain type of installation, nor will they give indications on the assumed cost of energy when obtains a high energy classification. For example, it is not said that a heat pump which presumably will have a higher efficiency class than a condensing boiler can then actually be used in a given type of building. This is why the advice of a competent technician is still necessary to understand the label and select the best product or system that best meets the needs of your building. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : AtmoMAG mini 114/1 Z LPG Product code : 10022575 DHW energy efficiency class: A Ignition type: Piezoelectric Minimum power : 7.6 kW Maximum power : 18.1 kW Withdrawal rate: 11 l/min Flue connection diameter: 110 mm Gas - hydraulic pipes diameter: 1/2" - G1/2" Dimensions (HxWxD) 580x310x255 mm Vaillant AtmoMAG mini water heater Piezoelectric ignition water heaters. The ease of use, the compact dimensions, the simplicity of installation and the personalized management of the hot water make the atmoMAG XZ water heater the right choice for those looking for an excellent quality/price ratio without forgetting safety. AtmoMAG The cheapest and most flexible solution for quick and simplified replacements Comfort High hot water production Many models to satisfy every installation and ignition requirement savings Great reduction of gas consumption thanks to the flame self-modulation system Safety Reliability of every single component tested by Vaillant LabTest Heat exchanger with anti-thermal expansion system Simplicity Multiple selectable power levels It is controlled with only two knobs Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : AtmoMAG mini 144/1 Z Methane Product code : 10022576 DHW energy efficiency class: A Ignition type: Piezoelectric Minimum power : 9.7 kW Maximum power : 23.1 kW Withdrawal rate: 14 l/min Flue connection diameter: 130 mm Gas - hydraulic pipes diameter: 1/2" - G1/2" Dimensions (HxWxD) 680x350x270 mm Vaillant AtmoMAG mini water heater Piezoelectric ignition water heaters. The ease of use, the compact dimensions, the simplicity of installation and the personalized management of the hot water make the atmoMAG XZ water heater the right choice for those looking for an excellent quality/price ratio without forgetting safety. AtmoMAG The cheapest and most flexible solution for quick and simplified replacements Comfort High hot water production Many models to satisfy every installation and ignition need savings Great reduction of gas consumption thanks to the flame self-modulation system Safety Reliability of every single component tested by Vaillant LabTest Heat exchanger with anti-thermal expansion system Simplicity Multiple selectable power levels It is controlled with only two knobs Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

 ATTENZIONE  IL PRODOTTO È NUOVO E FUNZIONANTE, MA PRESENTA AMMACCATURE LATERALI, LIEVI ABRASIONI E L'IMBALLO È USURATO. (PER MAGGIORI INFORMAZIONI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE) Caratteristiche Tecniche Modello : AtmoMAG mini 114/1 Z Metano Codice prodotto : 10022574 Classe di efficienza energetica in ACS : A Tipo di accensione : Piezoelettrico Potenza minima : 7,6 kW Potenza massima : 18,1 kW Portata prelievo : 11 l/min Diametro allacciamento fumi : 110 mm Diametro tubi gas - idrauliche : 1/2" - G1/2" Dimensioni (AxLxP) 580x310x255 mm Scaldabagno Vaillant AtmoMAG mini Scaldabagni ad accensione piezoelettrica. La facilità di utilizzo, le dimensioni compatte, la semplicità di installazione e la gestione personalizzata dell’acqua calda fanno dello scaldabagno atmoMAG XZ la scelta giusta per chi cerca un ottimo rapporto qualità/prezzo senza dimenticare la sicurezza. AtmoMAG La soluzione più economica e flessibile per sostituzioni rapide e semplificate Comfort Elevata produzione di acqua calda Tanti modelli per soddisfare ogni esigenza di installazione e di accensione Risparmio Grande abbattimento dei consumi di gas grazie al sistema di automodulazione della fiamma Sicurezza Affidabilità di ogni singolo componente testata dal LabTest Vaillant Scambiatore di calore con sistema di antidilatazione termica Semplicità Più livelli di potenza selezionabili Si comanda con solo due manopole Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENZIONE. IL PRODOTTO È NUOVO E FUNZIONANTE, MA PRESENTA VARIE BOZZATURE POSTE SUL LATERALE DELLO SCALDABAGNO E L'IMBALLO È USURATO. (PER MAGGIORI INFORMAZIONI SUI DANNEGGIAMENTI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE) Nome Prodotto Scaldabagno a Gas Vaillant ATMOMAG MINI 144/1 14 Lt Low NOx Metano - NOVITA' Caratteristiche Tecniche Dati tecnici - Generali 0010022572 Classe A Portata acqua calda 3,4 / 7,0 Portata termica massima  27.7 kW Potenza termica massima 23.1 kW Portata Acqua 14 l/min Classe NOx 6 Dimensioni AxLxP 680x350x270 mm Caratteristiche Generali AtmoMAG MINI I 144 atmoMAG I sono scaldabagni a tiraggio naturale a basse emissioni di NOx (classe 6) con accensione elettronica alimentata da batterie. Una continua modulazione della fiamma garantisce contenuti consumi di gas, proporzionali alle reali esigenze dell’utente. La rilevazione di fiamma a ionizzazione ed un sistema di controllo per l’interruzione dell’afflusso di gas, assicurano la massima sicurezza di funzionamento in caso di mancata accensione o spegnimento improvviso. Semplicità di gestione del comfort sanitario è una delle caratteristiche consolidate di atmoMAG. Nella versione mini sicurezza e funzionalità rimangono invariate e le ridotte dimensioni diventano motivo di scelta in alcune situazioni abitative. atmoMAG I mini 114 (produzione di acqua calda) è la versione atmosferica con portata ACS da: 11 litri/minuto a Metano e GPL. atmoMAG I 144 (produzione di acqua calda) è la versione atmosferica con portata ACS da: 14 litri/minuto a Metano e GPL. Semplicità di gestione Connessioni flessibili in dotazione Modulazione continua di fiamma Dimensioni compatte Basse emissioni di NOx (classe 6) Garanzia Prodotto  Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENTION THE PRODUCT IS NEW AND CHECKED BY OUR TECHNICIANS, IT HAS TRANSPORT DEFECTS: FRONT DRAFT SIDE RECESS WORN PACKAGING (FOR MORE DETAILS VIEW THE PHOTOS NEXT TO THE MAIN IMAGE). Vaillant Gas Water Heater ATMOMAG MINI 144/1 14 Lt Low NOx LPG Technical Features Technical data : General 0010022573 Class : A Hot water flow rate: 3.4 / 7.0 Maximum heat output: 27.7 kW Maximum thermal power: 23.1 kW Water flow rate: 14 l/min Class : NOx 6 Dimensions: HxWxD 680x350x270 mm Power supply: LPG General Features AtmoMAG MINI I atmoMAG I are natural draft water heaters with low NOx emissions (class 6) and battery-powered electronic ignition. Continuous flame modulation guarantees low gas consumption , proportional to the user's actual needs. Ionization flame detection and a control system for interrupting the gas flow ensure maximum operating safety in the event of failure to ignite or sudden shutdown. Simplicity of managing domestic comfort is one of the consolidated characteristics of atmoMAG. In the mini version, safety and functionality remain unchanged and the small size becomes a reason for choice in some living situations. atmoMAG I mini 114 (hot water production) is the atmospheric version with DHW flow rate of: 11 litres/minute on Methane and LPG. atmoMAG I 144 (hot water production) is the atmospheric version with DHW flow rate of: 14 litres/minute on Methane and LPG. Ease of management Flexible connections included Continuous flame modulation Compact size Low NOx emissions (class 6) Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less