ARISTON ELECTRIC STORAGE WATER HEATER SHAPE ECO EVO 80 V/5 EU VERTICAL 80 LITERS - NEW Technical features Product code: 3626085 Energy label specifications according to the European ErP directive Energy efficiency: Class B Withdrawal profile: M profile Characteristics of heating/DHW operation: Capacity: 80 litres Installation: vertical Power: 1200W Voltage: 230V Heating time (ΔT=45°C): 3.40 Max working pressure: 8 bar Max operating temperature °C 80 Net weight: 27kg Protection: IPX4 Dimensions: 775x476x489mm SHAPE ECO evo Shape Eco is the new generation of water heaters characterized by quality and efficiency designed to meet the different needs of consumers. A perfect blend of technology and design, Shape Eco offers, integrated, the most modern technologies such as ECO, Nanomix+Best and ABS safety package, together with a new design with a prismatic shape. The SHAPE ECO comes in the 50, 80 and 100 liter versions. Characteristics: Exclusive design Precise and customizable temperature regulation ECO/EVO function (patented) Easy and immediate reset Large size polyurethane insulation Safety valve tested at 8 bar Enamelled titanium boiler tested at 16 bar 5 bolt flange ANTI-LEGIONELLA function To ensure maximum safety and hygiene, the new Ariston products with ABS package are equipped with the anti-legionella function which, if this does not happen for 30 consecutive days, heats the stored water up to 65° c. ANTI-FREEZE function If the water heater is connected to the electricity line, the resistance is activated when the accumulated water temperature drops below 5°C. This system avoids possible breakage due to the expansion caused by the freezing of the water inside. SELF-DIAGNOSTICS function In the event of a fault, the water heater displays the type of problem that has occurred on the front panel via LEDs, allowing for faster repairs. ANTY-DRY function a protection system designed to ensure that the water heater does not turn on in the event of a lack of water in the boiler, thus avoiding internal overheating and the consequent breakage of internal components. ELECTRICAL SAFETY function ACTIVE At the end of each water heating cycle, the water heater performs a double disconnection from the electricity line, thus guaranteeing complete safety. Function ECO is a software that maximizes savings by self-learning the user's consumption: it optimizes the production of hot water and minimizes waste Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Shape Eco Evo 100 H/5 Product code: 3626089 Capacity : 100 litres Installation : Horizontal Energy efficiency Energy efficiency class: Class C Collection profile : L Performance Power: 1,500 kW Voltage: 230V Heating time (ΔT=45°C): 3.40 Maximum temperature : 80°C Maximum working pressure: 8 bar Protection: IPX4 Dimensions and weight Dimensions (HxWxD): 927x476x489 mm Net weight: 27.0kg Electric storage water heater SHAPE ECO EVO EU Shape Eco Evo is the new generation of water heaters characterized by quality and efficiency and designed to meet the different needs of consumers. It offers a perfect mix of the latest technologies such as ECO, Nanomix+Best and the ABS safety package, together with a new prism-inspired shape design. Available capacity versions are 50, 80 and 100 litres High efficiency Product characterized by high energy performance, reduction of consumption and polluting emissions ECO EVO function Allows you to save up to 14% on bills Safety package Complete electronic safety package with a series of devices that guarantee maximum safety for both the user and the product, allowing risk-free use of the water heater and reducing the possibility of breakdowns Programming function Two different programs can be set to maximize comfort and increase energy savings by up to 20%. Ariston quality forever at your home Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. Strong and super resistant materials, components and products developed to work in extreme conditions to deliver high-level results with maximum durability. Totally safe Designed with the most modern technology and built with selected materials, Ariston water heaters are totally safe Characteristics ECO function EVO (patented) Available in horizontal and vertical version Large polyurethane insulation High energy saving Enamelled titanium boiler tested at 16 bar Magnesium anode Exclusive design and smart display for reading and setting the temperature Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS NEW AND 100% WORKING, BUT IT HAS VARIOUS DENTS AND REPAIRS WITH PLASTIC PARTS GLUE (SEE PHOTO) Product code: 3629052 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: Capacity l 80 Power kW 1.2 Average absorbed electrical power kW 0.19 Electric power absorbed max kW 1,42 Voltage V 220-240 i-Memory heating time (ΔT=43°C) h,min 5.25 Boost heating time (ΔT=43°C) h,min 2.34 Green heating time (ΔT=43°C) h,min 9.21 Maximum working pressure 8.0 bar Min/max air temperature °C 12/40 Sound power 49 dB Weight kg 37.5 IP protection X4 Lydos Hybrid 50% Energy Saving Every Day. Lydos Hybrid is the first water heater with hybrid technology in class A which allows you to save 50% of energy compared to one in class B, thanks to the combined use of energy from the heat pump and electricity. Hybrid Intelligence. The innovative i-Memory software learns your habits to efficiently manage hybrid technology, choosing the most convenient option between using energy from the heat pump and electricity. After an initial learning phase, the i-Memory is able to program the water temperature every hour, so as to meet the user's needs while saving time and energy. Superior Performance. Thanks to Hybrid Intelligence and i-Memory, hot water is always available when needed. The BOOST function speeds up the production of hot water and the Shower Ready icon notifies you when the first shower is ready. Simple installation . Designed to be as easy to install as any electric water heater No additional work is required thanks to compatibility with the supports and water connections of standard Ariston electric water heaters The hydraulic connections are completely hidden inside the product itself Italian style and intuitive design thanks to the advanced hi-tech interface.  Functions: i-MEMORY: Chooses the best compromise between comfort and efficiency based on user habits. The temperature and the amount of hot water are set on the basis of the energy consumption in the last four weeks. Managing the operation of the heating element and the heat pump is therefore an improvement process. Green Achieves maximum efficiency using 100% of the heat pump. The maximum temperature that can be reached is 53°C and cannot be increased. The electric resistance is activated only with Anti-legionella, or in the event of a malfunction of the heat pump. boost Temporarily increases the electric power of the product, in case of need for hot water within a short time. The resistance and the heat pump work together up to 53°C, after which the temperature is regulated only by the resistance. When the desired temperature is reached, the Boost function deactivates. Program Desired time and temperature program to optimize consumption thanks to hybrid technology. Allows the user to choose two different temperatures at two different times. Operation is in heat pump or, if necessary, in resistance. Lydos Hybrid At a Glance: First electric water heater with class A hybrid technology 50% savings compared to a class B water heater i-Memory, Program, Green and Boost function Active anode + magnesium Enamelled resistance in Incoloy nickel alloy for anti-noise and anti-corrosion Replacement of old water heaters Ease of installation Hidden hydraulic connections Condensate collection tray available as an accessory

Read more less

ATTENTION: OFFER VALID UNTIL STOCKS LAST! Overview ARISTON FAST EVO B 11 EU METHANE GAS WATER HEATER with battery Cod. 3632215 - new ErP model Open Chamber NATURAL DRAFT Technical specifications Product code: 3632215 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: profileM Characteristics of heating/DHW operation: CE certification (pin) 0063CN7240 Category II 2H3+ Type B11BS Electronic ignition Power supply: 2x1.5V LR20 batteries Chamber Open to natural draught Nominal heat output: 19 kW Minimum thermal power: 8 kW Nominal heat input: 21.5 kW Combustion efficiency (fumes): >89% Min/max temperature selectable: 35-65C Flow rate (T 25C): 11 l/min Minimum operating flow: >2 l/min Dimensions (HxLxP): mm 580 x 310 x 210; 9.6kg Power supply: METHANE Main features Fast EvC/B EU Fast Evo: The new range of instantaneous gas-fired water heaters in the Open Chamber version with high efficiency and reliability standards (11,14 and 16 l/min) Simple, reliable and intuitive Fast EVO Ariston brings the evolution of the Open Chamber gas water heater to every home. High standards of efficiency and great reliability for 2 models with different types of ignition: rechargeable battery and knob for Fast EVO B and power supply cable and LCD display for Fast EVO C. Both versions ensure high performance and considerable savings in terms of consumption. the Fast EVO water heater offers numerous advantages, starting from the continuous flame modulation thanks to the NTC probe located at the exchanger outlet, which guarantees maximum temperature stability. In case of fluctuations in the water flow rate (2 l/min minimum variation threshold), the new Fast EVO, thanks to the NTC probe and the electronic card, manages to keep the temperature stable with better performance compared to the models considered top of the market. Fast EVO also equipped with water flow switch, humid chamber copper exchanger and electronic flame detection; the minimum operating pressure of 0.1 bar allows the product to operate in the most extreme conditions, while the minimum ignition flow rate is 2 l/min. Overtemperature protection makes it safer to use. Advantages: The innovative water heater available in the version with electric power cable and LCD display (FAST EVO C) or with rechargeable battery (FAST EVO B) Intuitive control panel with LCD display (model C) Continuous flame modulation thanks to the NTC probe located at the exchanger outlet (maximum temperature stability Minimum operating pressure 0.1 bar Minimum ignition flow rate 2 l/min Presence of the water flow switch "Humid chamber" copper heat exchanger Electronic detection of flame presence External temperature regulation: Allows the user to choose the temperature that best suits his needs Electronic control: Electronic control panel for easier and more immediate use. High efficiency: Product characterized by high energy performance, reduction of consumption and polluting emissions. Can be integrated with Solar : Suitable solar integration through a thermostatic valve which allows the water heater not to start in the event that the temperature of the water preheated by the solar system is higher than the desired temperature, guaranteeing high energy savings Ecodesign Directive In fact, after very long negotiations, the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing boilers on the market starting from 26 September 2015. This means that starting from this date, anyone wishing to install a boiler in their own home will have to install only condensation. Only a particular type of non-condensing boiler will continue to be produced which is technically called "Open Chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings. What is energy labelling Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies on end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. From 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks ),. How to read energy labels There are different labels, based on the type and function of the product (both space and water heating, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in a system. In this case it is necessary to prepare a system label in addition to that relating to the individual product. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

GAS WATER HEATER ARISTON NEXT OUTDOOR 20 EU LPG - new ErP model Technical features Product code: 3632259 Energy label specifications according to the European ErP directive Energy efficiency: Class B Load profile: XL profile Characteristics of heating/DHW operation: CE certification (pin) 0051CM4090 Category II 2H3P Nominal thermal power kW 36.1 Minimum thermal power kW 7.2 Modulation range 1 : 5.0 Nominal heat input kW 40 Min/max temperature selectable 35-70 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow rate l/min > 3.8 Flow rate (ΔT 25°C) l/min 20 Supply voltage (frequency 50 HZ) V 230-50 Maximum absorbed power W 63 Minimum ambient temperature of use °C -20 Electrical protection type IPX5D Dimensions (HxWxD): 582 x 375 x 160 mm Weight: 17.5kg Power supply: LPG or methane Next Outdoor EU The generation of gas water heaters for outdoor use Next Outdoor, the new instantaneous gas water heater for outdoor use. Featuring an exclusive design, small size (only 13cm deep!) and new features. Next outdoor offers maximum temperature stability thanks to the electronic modulation of the gas and the fan, the wide modulation ratio between the maximum and minimum power, and the automatic water flow regulator. With the bathroom function, Next outdoor allows you to have the ideal quantity and temperature for maximum relaxation. Thanks to the introduction of the PROFESSIONAL 20 and 24 l/min models, the Ariston range for the outdoor version is completed, without however renouncing an attractive design and the compactness that distinguishes it on the market. The Next Outdoor, thanks to the remote control, has all the functions at hand and the small size makes it easily adaptable to any type of outdoor environment. Furthermore, thanks to the models of the new PROFESSIONAL range (20 and 24 l/min) it is able to manage up to a maximum of 5 products in cascade. Next Outdoor is the most efficient in its category and can also be integrated with solar systems. Thanks to the kit with thermostatic valve, the NEXT OUTDOOR is set up for integration and management of solar systems. An ecological and clean solution to avoid waste and encourage energy saving. Characteristics: External installation type A3 It does not require a fume exhaust system Standard remote control: with the remote control it is possible to change the temperature from anywhere in the house Electronic ignition (220 v) with ionization flame sensor and consequent gas savings of up to 25% Maximum efficiency > 90% Modulation ratio 1:6 Automatic flow regulator with stepping motor Electronic thermostatic modulation for precise temperature control Minimum activation pressure at 0.1 bar Standard antifreeze function: up to -20° Cascade solution up to 5 products (only with models 20 and 24) Integration with solar thermal via thermostatic valve Small size Absolute safety thanks to the IPX5D electrical protection Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Heat pump water heater Ariston Nuos Primo 80 class A code 3623238 accumulation 80 liters Technical features Product code: 3623238 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: COP* 2.32 Heating time* h:min 5:20 Min/max air temperature °C 10/40 Max water temperature heat pump only/with R °C 55/75 Sound power *** dB(A) 54 Average absorbed electrical power W 250 Nominal accumulation capacity l 80 Maximum working pressure bar 8 Maximum absorbed voltage/power V/W 220-240/1550 Resistance power W 1200 Standard air flow m3/h 170 Minimum volume of the installation room** m3 20 Empty weight kg 45 IP24 electrical protection Insulation thickness mm 31 Diameter of water connections " 1/2M Minimum storage room temperature °C 1 Thermal dispersions (Pes)* W 17 Available static pressure Pa 65 Annual energy consumption (average climate)* kWh/year 533 Seasonal yield* % 96 V40 (quantity of water mixed at 40°C)* l 91 New Primo  An advanced efficient and sustainable solution. It uses the heat from the air as a renewable energy source to obtain the greatest comfort and savings. Working range in heat pump with air temperatures from 10 to 40°C Ambient air product Ecological gas R134a allows to reach water temperatures up to 55°C in heat pump Condenser wrapped around the boiler (not immersed in water) Titanium enamelled steel boiler Supplementary electrical resistance Magnesium anti-corrosion anode LED displays Functions: green, boost, auto, hourly programming of withdrawals and anti-legionella Product for internal installation Excellent for a family of 3-5 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THIS ITEM WILL BE REPLACED WITH NEXT EVO X 16 LT. COD. 3632433 Technical features Product code: 3632165 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: XL profile Characteristics of heating/DHW operation: Category II 2H3P Nominal thermal power kW 28 Minimum thermal power kW 5.4 Modulation range 6 - 31.0 Nominal heat input kW 31 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 16.0 Flow rate with temperature difference (Δt) 25 °C l/min 8.5 Supply voltage (Freq. 50 HZ) V 230 Maximum absorbed power W 49 Protection type IPX4D Power supply: METHANE General characteristics Next Evo EU The sealed chamber instantaneous water heater Ariston launches Next Evo , the new instantaneous gas water heater for the production of domestic hot water. Characterized by an exclusive design, reduced dimensions and new functions, Next Evo is even more efficient and easy to use. The innovative electronic control of Next Evo allows you to adjust, via an intuitive LCD display, the ideal temperature for the user and to keep it constant even when the required water flow varies, thanks to the two NTC probes which measure the temperature of the both incoming and outgoing water. The central position of the smoke outlet and the extremely reduced depth (only 17.5 cm) make it extremely flexible and easy to install. Maximum energy saving is ensured by the possible integration of Next Evo with natural and forced circulation thermal solar systems: the solar kit with thermostatic valve has been designed precisely to facilitate its implementation. A new, innovative way of conceiving solar integration: versatile, practical and easy to install Characteristics: Ultra compact: only 17.5 cm deep Thermostatic: modulating temperature control via NTC probes allowing high standards in terms of energy saving and comfort Flame ionisation electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.1 bar Operation even with minimum water flow rates > 2 l/min Can be integrated with solar thermal systems Presence of the smoke pressure switch Presence of the water flow switch IPX4D electrical protection Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION The boiler will be supplied with methane with the nozzle kit included for the LPG transformation. Contact the local authorized assistance center in advance for the conversion to LPG. NB THE PRODUCT IS MADE TO ORDER Technical features Model : S/SGA BF X VT 100 Code : 3211161 Power supply: methane Energy class: B Pickup profile: M Technical data Capacity: 100L Thermal power: 4 kW Useful power: 3.68 kW Heating time (ΔT= 45°C): 54 min. Continuous water at 40°C: 70 l/h Water in the first hour at 40°C: 251 l Natural gas consumption G20: 0.42 m3/h Max working pressure: 8 bar Dimensions and weight Net weight: 52kg Legend A: 1125mm B: 640mm D: 395mm D: 847mm Ariston S/SGA BF X VT water heater Low NOx: Complies with 09/26/2018 Operation without electrical connections Piezo ignition system Enamelled water heater Magnesium anode Operation even at minimum water pressures Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: THE FOLLOWING ITEM WILL BE SHIPPED AFTER JANUARY 6TH Electric Water Heater Ariston Pro 1 Powerflex 50 liters Vertical Eu code 3201583 - New General characteristics Energy Class B M pick profile Capacity 50 litres Power kW 2.5 Voltage V 230 Heating time (?T=45°C)-power max h/min 1.08 Max operating temperature °C 80 Max working pressure bar 8 Net weight 16kg IP protection X3 Dimensions HxWxD mm 553x450x470 PRO1 Powerflex DOMESTIC HOT WATER AND NEW TECHNOLOGIES: ARISTON INVESTS IN THE FUTURE Ariston, leader in thermal comfort, has always been committed to finding innovative solutions by investing in new technologies capable of satisfying the needs of every consumer. Powerflex, the new electric water heater designed by Ariston, is the confirmation of this philosophy: a totally smart product that works in synergy with the needs of a constantly evolving market (the electric one). Thanks to the Chain2 technology of the new electricity meters, the water heater takes on a different role within the home: it is, in fact, able to maximize its performance by becoming an integral part of efficient energy management in the home . T-FLEX 2.0: THE TECHNOLOGY THAT ENSURES HOT WATER WITHOUT BLACKOUTS. T-Flex 2.0 is the new smart technology through which the water heater communicates with the electricity meter by autonomously modulating the power based on the domestic network load to maximize performance and minimize the risk of blackouts BLACKOUT PREVENTION In the event of an overload of the electricity network due to the simultaneous activity of several devices, T-Flex 2.0 autonomously reduces the power of the water heater and brings the power back within the limits established by the contract. T-Flex 2.0, even when the water heater is on but not heating the water, promptly signals the overload of the electricity network, through an acoustic and luminous indicator, allowing the user to intervene to avoid unpleasant blackouts. HALVING OF WATER HEATING TIMES When the network load allows it, T-Flex 2.0 makes the water heater work at maximum power, halving the water heating times up to 50%**. PRO1 POWERFLEX: SMART OPERATION FOR GREAT PERFORMANCE. POWER REDUCTION IN THE EVENT OF OVERLOAD If other devices are in operation, Pro1 Powerflex reduces its power to minimize the risk of blackouts. BUZZER AND LIGHT ALERT When several devices are running at the same time and the power reduction of the Pro1 Powerflex is not sufficient to prevent a blackout, the water heater it emits an acoustic signal giving the user time to intervene. The function is also active if the overload does not directly depend on the water heater. AUTO - POWER MODULATION As soon as possible, it automatically increases the power, considerably reducing the heating times. ECO EVO FUNCTION Memorize your daily habits to supply you with hot water only when you need it, allowing you to save up to 14%** on energy. WATERPLUS TECH Maximizes the volume of accumulated hot water allowing you to have up to 16%*** more water hot water available, enough for an extra shower. TEMPERATURE ADJUSTMENT The practical selector allows you to set the water temperature that best suits your tastes and needs TITANIUM ENAMEL The Titanium Plus technology guarantees the long life of the water heater while maintaining its top performance. The internal surface of the product is doubly protected against corrosion thanks to the natural properties of titanium, which protect against rust by preventing the formation of limescale in the tank, and the action of the magnesium anode Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Electric water heater Ariston Pro1 Eco 150 v/5 Eu Vertical 150 lt 3700569 Technical features Capacity 150 litres Net weight 32.4 kg Max working pressure bar 8 Power 2 kW Voltage V 230 Heating time ∆T45°C h/min 3h55 m Energy class C L sampling profile Code 3700569 Vertical installation 5 year guarantee PRO 1 ECO Electric water heater Ariston quality always at your home 100% Guaranteed Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. 100% Checked and Tested Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment 100% Built to last Strong and super resistant materials, components and products developed to work in extreme conditions to deliver high-level results with maximum durability. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Nominal capacity 155l Energy class B L withdrawal profiles Thermal power 5.5 kW Useful power 5.12 kW Heating time (ΔT= 45°C) 48 min Nominal pressure 8 bar Dimensions: General characteristics SGA BF X Low NOx: ErP compliant 09/26/2018 Operation without electrical connections Enamelled boiler Magnesium anode Piezo ignition system Prepared for LPG transformable methane gas (nozzle kit included) Coaxial smoke outlet diam. East. 100mm, length. max. 900mm Operation even at minimum water pressures Triple safety valve Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB Article out of production in case of unavailability of the product the new model NEXT EVO X 11 will be shipped Technical features Product code: 3632160 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: Category II 2H3P Nominal thermal power kW 19.5 Minimum thermal power kW 4.5 Modulation range 5 - 21.5 Nominal heat input kW 21.5 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 11.0 Flow rate with temperature difference (Δt) 25 °C l/min 8.5 Supply voltage (Freq. 50 HZ) V 230 Maximum absorbed power W 37 Protection type IPX4D Power supply: METHANE General characteristics Next Evo EU The sealed chamber instantaneous water heater Ariston launches Next Evo , the new instantaneous gas water heater for the production of domestic hot water. Characterized by an exclusive design, reduced dimensions and new functions, Next Evo is even more efficient and easy to use. The innovative electronic control of Next Evo allows you to adjust, via an intuitive LCD display, the ideal temperature for the user and to keep it constant even when the required water flow varies, thanks to the two NTC probes which measure the temperature of the both incoming and outgoing water. The central position of the smoke outlet and the extremely reduced depth (only 17.5 cm) make it extremely flexible and easy to install. Maximum energy saving is ensured by the possible integration of Next Evo with natural and forced circulation thermal solar systems: the solar kit with thermostatic valve has been designed precisely to facilitate its implementation. A new, innovative way of conceiving solar integration: versatile, practical and easy to install Characteristics: Ultra compact: only 17.5 cm deep Thermostatic: modulating temperature control via NTC probes allowing high standards in terms of energy saving and comfort Flame ionisation electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.1 bar Operation even with minimum water flow rates > 2 l/min Can be integrated with solar thermal systems Presence of the smoke pressure switch Presence of the water flow switch IPX4D electrical protection Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less