NB: PRODUCT DISCONTINUED THE NEW MODEL OPALIA C LOW NOX WILL BE SHIPPED GAS WATER HEATER SAUNIER DUVAL OPALIA C 11 E - A/1 LPG, Open Chamber: instantaneous gas water heater for the production of domestic hot water. Technical specifications Model: ErP efficiency class in heating/DHW: B Healthcare professional profile: M Combustion chamber: open to natural draft Sanitary Rated power min/max: kW 10.7/19.2 Type of regulation: Modulating Ignition type: Electronic Specific flow rate (T=25 K): l/min 11 Minimum ignition flow l/min 2.7 Minimum supply pressure 0.2 bar Electrical characteristics Supply voltage (V/Hz): 2 batteries Dimensions: Dimensions (hxlxp): 575x310x220 mm ; 10.3 Kg Diameter of the flue pipe mm 110 LPG code - 10013748 LPG version Features list OPALIA The entire range of Opalia water heaters is characterized by the extreme ease of use, the reliability of the performances combined with a modern design and simplicity of use. The Opalia model is available in the Open Chamber and 2 - Sealed Chamber water heaters, from 11 to 14 litres, all equipped with electronic ignition with safety lock in the event of pilot flame failure. Characteristics: Modern design with compact dimensions: the water heaters can be easily installed in any room, even inside the kitchen cabinets. Maximum safety: the safety thermostat intervenes in the event of overtemperature of the domestic hot water; the ionization flame control blocks the gas supply in the event of a flame failure at the burner; in the Open Chamber models, the anti-fume backflow safety device blocks the water heater in the event of a risk of fumes entering the environment. Electronic control (only for models with 2 - Sealed chamber water heaters): it is possible to optimally adapt the operation of the appliance to the conditions of use and the temperature of the hot water, guaranteeing maximum sanitary comfort and optimizing gas consumption. Any malfunctions are signaled on the LCD display. Opalia C 11 E - A/1 and C 14 E - A/1 Open Chamber instantaneous gas water heaters Electronic ignition card for: intermittent pilot flame ignition and to control the lack of burner flame. Fume discharge safety sensor that blocks the water heater in case of risk of fumes being released into the environment. Safety thermostat which blocks the water heater in the event of domestic hot water overheating at the exchanger outlet. Diaphragm gas valve. Flow sensor. Copper lamellar heat exchanger. Domestic hot water temperature selector. Gas power selector. All ready for Energy Labeling 1. ErP, Ecodesign and ELD. What do they mean and how do they differ ErP and Ecodesign: The EU has issued new obligations for Energy Using Products (ErP). Known as the Ecodesign Directive, it prescribes minimum efficiency requirements and emission limits for DHW heating appliances up to 400 kW. ELD: In addition to the ErP Directive, the EU is also introducing mandatory energy labeling for the same type of appliances up to 70 kW. The Energy Labeling Directive (ELD) requires that new products and systems for heating DHW production are labeled with an indication of their energy efficiency class. 2. Which products are affected by the new directives The Ecodesign directive addresses two product categories that are relevant to our installers and resellers. Category 1: Includes electric, gas and oil space heaters, combi boilers, heat pumps and cogenerators. Category 2 : includes electric, gas and oil-fired DHW production equipment, DHW heat pumps and solar systems. By combining these products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

NB: ITEM OUT OF PRODUCTION, IN CASE OF UNAVAILABILITY THE NEW THERM 4204 MODEL WILL BE SHIPPED Open chamber water heater Junkers Minimaxx Hydropower 11 liters WR-11 2B METHANE Energy efficiency class: A Open chamber with natural draft: Yes Version: Natural gas Nominal thermal power: kW 19.2 Nominal heat input: kW 21.8 Minimum thermal power: kW 7.0 Minimum heat input: kW 8.1 Manual power adjustment range: kW 7.0 - 19.2 Flow rate of water supplied with ΔT 25 °C: l/min 11.0 Flow rate of water supplied with ΔT 50 °C: l/min 5.5 Minimum operating flow rate: 2.2 l/min Maximum working pressure: 12.0 bar Minimum working pressure: 0.2 bar Degree of protection: IPX4D Dimensions (L x W x H): mm 220 x 310 x 580 Exhaust system: Ø mm 110 Minimaxx HYDROPOWER MINIMAXX HYDROPOWER, thanks to the innovative hydrodynamic generator, defines a new technological standard. The energy needed to switch on the water heater, with open chamber and natural draft, comes directly and exclusively from the water flow which drives an internal turbine generator (HDG-HydroDynamic Generator) which generates the electric current needed to switch on the burner. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : AtmoMAG mini 114/1 Z Methane Product code : 10022574 DHW energy efficiency class: A Ignition type: Piezoelectric Minimum power : 7.6 kW Maximum power : 18.1 kW Withdrawal rate: 11 l/min Flue connection diameter: 110 mm Gas - hydraulic pipes diameter: 1/2" - G1/2" Dimensions (HxWxD) 580x310x255 mm Vaillant AtmoMAG mini water heater Piezoelectric ignition water heaters. The ease of use, the compact dimensions, the simplicity of installation and the personalized management of the hot water make the atmoMAG XZ water heater the right choice for those looking for an excellent quality/price ratio without forgetting safety. AtmoMAG The cheapest and most flexible solution for quick and simplified replacements Comfort High hot water production Many models to satisfy every installation and ignition requirement savings Great reduction of gas consumption thanks to the flame self-modulation system Safety Reliability of every single component tested by Vaillant LabTest Heat exchanger with anti-thermal expansion system Simplicity Multiple selectable power levels It is controlled with only two knobs Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: ITEM OUT OF PRODUCTION, IN ITS ABSENCE IT WILL BE REPLACED WITH THE NEXT MODEL THERM 4204 Technical features Product data for energy consumption - according to requirements of EU regulations no. 811/2013 and 812/2013 to complete the directive 2010/30/EU LPG code: T4200 11-2 31 Water heating energy efficiency class A Declared load profile M Open chamber with natural draft Nominal heat output (Pn) [kW] 19.2 Nominal heat input (Qn) [kW] 21.8 Max water flow with ΔT 25 °C [l/min] 11 Max water flow with ΔT 25 °C [l/min] 5.5 sound pressure max. [dB(A)] 69 Weight (without packaging) [kg] 11.7 Dimensions (H x W x D) [mm] 580 x 310 x 228 Junkers Bosch water heaters With Junkers Bosch gas and heat pump water heaters you are assured of the best technology for the production of domestic hot water, always available and perfectly tailored to the user's needs: high quality, maximum efficiency and safety, ease of installation and control savings on bills. What to ask for more? Whatever your choice, choose quality. The wide range of Junkers Bosch gas and heat pump water heaters is able to meet the needs of your customers, to whom you can offer the most suitable solution for their home. Junkers Bosch gas water heaters are available in numerous models, to meet the most diverse needs: from the smallest ones, also suitable for being inserted in kitchen wall units, to those specifically designed for outdoor installation or for large buildings. Today it is possible to satisfy domestic hot water needs also through renewable energy sources: this allows not only economic savings, but also a contribution to environmental protection. Junkers Bosch heat pump water heaters are able to supply all the hot water needed in an efficient, convenient and sustainable way, obtaining energy from the external environment and using it to heat the water. Whatever your customers' requests, with Junkers Bosch you are sure to guarantee the best response. Environmentally friendly efficiency Choosing a gas water heater can also take advantage of renewable energy sources: all gas water heater models can be fully integrated, thanks to the Solar Kit accessory, in new or existing thermal solar systems, for exploit the inexhaustible energy of the sun for the production of domestic hot water. General characteristics THERM 4200 THERM 4200, the instantaneous gas water heater with compact dimensions, which reduces consumption and helps to protect the environment. Advantages ▶ Guarantees maximum safety thanks to a triple system which includes the smoke outlet sensor, the temperature limiter and the flame ionization control (which interrupts the gas flow in the event of ignition failure or accidental shutdown). ▶ Easily adjusted using the intuitive control panel ▶ It can be connected directly to solar thermal systems for the production of domestic hot water Characteristics ▶Electronic ignition by batteries ▶Continuous flame modulation ▶Works even in case of very low water pressures ▶Extremely compact size The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of the appliances, favoring their comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and domestic hot water production. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent concrete help for the consumer, allowing him to learn more about the characteristics of the system, acquire greater awareness of the energy savings allowed and make the best choice of what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing the score attributed to each appliance to increase and increasing the energy class of the system: it is therefore the task of whoever makes/installs the system to supply the consumer the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on home consumption, approximately 80% of which is due to heating and the production of hot water, and are already being incentivized at a tax level today. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the future orientation that has always distinguished the brand. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product code: 3632256 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Power supply: METHANE Characteristics of heating/DHW operation: CE certification (pin) 0051CM4090 Category II 2H3P Nominal thermal power kW 20.0 Minimum thermal power kW 4.2 Modulation range 1 : 4.8 Nominal heat input kW 22.0 Min/max temperature selectable 35-70 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 11.0 Supply voltage (frequency 50 HZ) V 230-50 Maximum absorbed power W 37 Minimum ambient temperature of use °C -20 Electrical protection type IPX5D Dimensions and weight Dimensions (HxWxD): 563 x 350 x 130 mm Weight: 11.6kg Next Outdoor EU The generation of gas water heaters for outdoor use Next Outdoor, the new instantaneous gas water heater for outdoor use. Featuring an exclusive design, small size (only 13cm deep!) and new features. Next outdoor offers maximum temperature stability thanks to the electronic modulation of the gas and the fan, the wide modulation ratio between the maximum and minimum power, and the automatic water flow regulator. With the bathroom function, Next outdoor allows you to have the ideal quantity and temperature for maximum relaxation. Thanks to the introduction of the PROFESSIONAL 20 and 24 l/min models, the Ariston range for the outdoor version is completed, without however renouncing an attractive design and the compactness that distinguishes it on the market. The Next Outdoor, thanks to the remote control, has all the functions at hand and the small size makes it easily adaptable to any type of outdoor environment. Furthermore, thanks to the models of the new PROFESSIONAL range (20 and 24 l/min) it is able to manage up to a maximum of 5 products in cascade. Next Outdoor is the most efficient in its category and can also be integrated with solar systems. Thanks to the kit with thermostatic valve, the NEXT OUTDOOR is set up for integration and management of solar systems. An ecological and clean solution to avoid waste and encourage energy saving. Characteristics: External installation type A3 It does not require a fume exhaust system Standard remote control: with the remote control it is possible to change the temperature from anywhere in the house Electronic ignition (220 v) with ionization flame sensor and consequent gas savings of up to 25% Maximum efficiency > 90% Modulation ratio 1:6 Automatic flow regulator with stepping motor Electronic thermostatic modulation for precise temperature control Minimum activation pressure at 0.1 bar Standard antifreeze function: up to -20° Cascade solution up to 5 products (only with models 20 and 24) Integration with solar thermal via thermostatic valve Small size Absolute safety thanks to the IPX5D electrical protection Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: SINCE THIS PRODUCT IS DISCONTINUED, THE NEW AVENIR PLUS LNX MODEL WILL BE SHIPPED WHEN STOCKS END GAS WATER HEATER CHAFFOTEAUX AVENIR PLUS SFT 11 EU LPG - COMPLETE WITH FUME EXHAUST KIT: AVENIR PLUS the gas water heater with 2 - Thermostatic Sealed Chamber Water Heaters guarantees total safety and maximum comfort for the user Technical specifications Product code: 3632169 Energy label specifications according to the European ErP directive Sanitary energy efficiency Class A Pickup profile: M Description: Model: AVENIR PLUS SFT 11 EU Ignition: electronic flame ionization Type: gas instantaneous water heater with 2 - Sealed chamber water heaters Operating characteristics: Nominal heat input: 21.5 kW Nominal heat output: 19.5 kW LPG gas supply pressure: 28-30/37 mbar Consumption - LPG Gas Flow Rates/Hour: 1.9 m3/h Hydraulic characteristics: Minimum/maximum nominal pressure: 0.1/8.5 bar Minimum operating flow: 2 l/min Flow rate with salttermic(t 25C): 11 l/min electrical circuit: Maximum absorbed power: 37 kW Electrical protection type: IPX4D Main features Avenir Plus AVENIR PLUS the gas water heater with 2 thermostatic sealed chamber water heaters guarantees total safety and maximum comfort for the user. The innovative design and compact size simplify use, installation and maintenance. Sanitary comforts Thermostatic: High precision NTC probes to measure the temperature at the cold water inlet and at the hot water outlet. The temperature remains stable even in the presence of variations in the water flow rate. The solar kit with thermostatic valve allows you to connect Avenir Plus to solar systems An ecological solution to save energy. Temperature control via probe. Convenience of installation use Different powers to increase the hot water flow rate (11 and 16 l/min with !t 25, C). Pressure switch for fume control. Versatile: Works perfectly with low hydraulic pressures (0.1 bar). Compatible with solar systems for greater gas savings. 2 - Sealed chamber water heaters of maximum safety for unventilated spaces. Available in 11 and 16 liter versions, natural gas and butane gas. sanitary pressure switch. energy saving and environmentally friendly Final 25% gas consumption reduction thanks to electronic ignition and flame ionization. Additional savings in gas consumption by combining the water heater with our solar systems. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the eco-design directive (ErP notcome ,© Energy Related Products ,î) imposes a minimum energy efficiency for heating devices for the production of hot water in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows for comparisons on the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and kettles placed on the market from 26 September 2015. It's about me too YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label; technical product sheet; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold together with other additional devices; technical sheet of the system with the parts relating to the products and the system already compiled. Dealer Responsibility First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible; all appliances and/systems are always accompanied by the obligatory technical data sheets; any type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production must be equipped with the new energy label which will report the energy class and main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of appliance there are different labels. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also provided in cases where a series of combined appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

NB IN CASE OF ABSENCE OF THE PRODUCT THE 2019 MODEL OPALIA LOW NOX WILL BE SHIPPED !!!!!!!!!!!!!!!!!!!!!!!!! Technical features Forced draft sealed chamber Efficiency class: A Sanitary load profile: M Min/max rated power: kW 6.4 - 19.2 Type of regulation: Modulating Ignition type: Electronic Specific flow rate (∆T=25 K): l/min 11 Minimum ignition flow l/min 2.7 Minimum supply pressure bar 0.1 Characteristics Electronic ignition board for: intermittent pilot flame ignition and to control the lack of burner flame. Flame modulation in relation to the temperature detected by the probe at the exchanger outlet Safety thermostat which blocks the water heater in the event of domestic hot water overheating at the exchanger outlet. Modulating gas valve. Flow sensor. Copper lamellar heat exchanger. Smoke pressure switch Standard antifreeze system (water heater ignition at 7 °C)  Dimensions Dimensions (HxWxD): 627x348x240 mm Weight: 18Kg

Read more less

ATTENTION: OFFER VALID UNTIL STOCKS LAST! Overview ARISTON FAST EVO B 11 EU METHANE GAS WATER HEATER with battery Cod. 3632215 - new ErP model Open Chamber NATURAL DRAFT Technical specifications Product code: 3632215 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: profileM Characteristics of heating/DHW operation: CE certification (pin) 0063CN7240 Category II 2H3+ Type B11BS Electronic ignition Power supply: 2x1.5V LR20 batteries Chamber Open to natural draught Nominal heat output: 19 kW Minimum thermal power: 8 kW Nominal heat input: 21.5 kW Combustion efficiency (fumes): >89% Min/max temperature selectable: 35-65C Flow rate (T 25C): 11 l/min Minimum operating flow: >2 l/min Dimensions (HxLxP): mm 580 x 310 x 210; 9.6kg Power supply: METHANE Main features Fast EvC/B EU Fast Evo: The new range of instantaneous gas-fired water heaters in the Open Chamber version with high efficiency and reliability standards (11,14 and 16 l/min) Simple, reliable and intuitive Fast EVO Ariston brings the evolution of the Open Chamber gas water heater to every home. High standards of efficiency and great reliability for 2 models with different types of ignition: rechargeable battery and knob for Fast EVO B and power supply cable and LCD display for Fast EVO C. Both versions ensure high performance and considerable savings in terms of consumption. the Fast EVO water heater offers numerous advantages, starting from the continuous flame modulation thanks to the NTC probe located at the exchanger outlet, which guarantees maximum temperature stability. In case of fluctuations in the water flow rate (2 l/min minimum variation threshold), the new Fast EVO, thanks to the NTC probe and the electronic card, manages to keep the temperature stable with better performance compared to the models considered top of the market. Fast EVO also equipped with water flow switch, humid chamber copper exchanger and electronic flame detection; the minimum operating pressure of 0.1 bar allows the product to operate in the most extreme conditions, while the minimum ignition flow rate is 2 l/min. Overtemperature protection makes it safer to use. Advantages: The innovative water heater available in the version with electric power cable and LCD display (FAST EVO C) or with rechargeable battery (FAST EVO B) Intuitive control panel with LCD display (model C) Continuous flame modulation thanks to the NTC probe located at the exchanger outlet (maximum temperature stability Minimum operating pressure 0.1 bar Minimum ignition flow rate 2 l/min Presence of the water flow switch "Humid chamber" copper heat exchanger Electronic detection of flame presence External temperature regulation: Allows the user to choose the temperature that best suits his needs Electronic control: Electronic control panel for easier and more immediate use. High efficiency: Product characterized by high energy performance, reduction of consumption and polluting emissions. Can be integrated with Solar : Suitable solar integration through a thermostatic valve which allows the water heater not to start in the event that the temperature of the water preheated by the solar system is higher than the desired temperature, guaranteeing high energy savings Ecodesign Directive In fact, after very long negotiations, the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing boilers on the market starting from 26 September 2015. This means that starting from this date, anyone wishing to install a boiler in their own home will have to install only condensation. Only a particular type of non-condensing boiler will continue to be produced which is technically called "Open Chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings. What is energy labelling Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies on end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. From 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks ),. How to read energy labels There are different labels, based on the type and function of the product (both space and water heating, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in a system. In this case it is necessary to prepare a system label in addition to that relating to the individual product. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Gas water heater Chaffoteaux Avenir Plus LNX Outdoor 11 liters low NOx LPG Energy class A M pick profile Product code 3632466 Nominal heat input kW 22 Minimum heat input 7.8 kW Nominal useful thermal power 19.2 kW Nominal flow rate (ΔT 25°C) 11.0 l/min Maximum hot water temperature 65 °C Minimum ambient temperature of use -20 °C Maximum absorbed power 33 W Power supply 230-50V/Hz LPG AVENIR PLUS LNX OUTDOOR The thermostatic gas water heater among the most compact on the market for outdoor use. High efficiency thanks to the modulating burner with multiple sections. Maximum safety thanks to installation outside the home, and easier and quicker thanks to the fact that it does not require a smoke outlet. Low NOx emissions: compliant with the Erp regulation of 09.26.2018 COMFORT Modulating: allows for great energy savings and offers greater comfort with one temperature stable in the presence of simultaneous requests for hot water. Thermostatic: high precision NTC probes to measure the cold water inlet temperature e hot water outlet. New standard wired remote control to view and change the temperature. SAFETY Maximum security thanks to installation outside the home. Quick and easy installation thanks to the fact that it does not require a smoke outlet. Standard antifreeze kit and maximum electrical protection IPX5D. Standard safety valve (optional safety group). ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT ECO function: reduces maximum power when not needed to optimize fuel consumption and emissions. Up to 25% less consumption thanks to electronic ignition and flame ionization. Solar kit with thermostatic valve allows the system to be integrated with solar systems. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER JUNKERS THERM 6000i S mod. WTD12-2 COMPLETE WITH FUME KIT 12 LT BLACK CNG NEW Cod. 7 736 503 623. Technical specifications DHW energy efficiency class (ErP): A Model: WTD12-2 Declared loader profile: M Gas instantaneous water heater 2 - Forced draft sealed chamber water heaters Nominal heat output: 20.8 kW Nominal heat input: 22.5 kW Efficiency 100% of nominal flow rate (%) 91.5 Rendimental 30% of nominal flow rate (%) 94 Water flow rate supplied with DT 25 C: 12 l/min Minimum operating flow: 2.4 l/min Operating pressure min-max: 0.1-12 bar Dimensions (LxWxH): 623 x 300 x 195mm - 13kg METHANE power supply Main features THERM 6000i S You would say that a water heater The Therm 6000i S water heater stands out for its tempered glass front, available in both the black and white versions, the small size and the integrated digital display, simple and intuitive to use with a soft touch control. The Therm 6000i S water heater can also be controlled via its Bosch Water app using smart devices (smartphones and tablets) connected via Bluetooth,¸. Winner of the 2015 Red Dot awards The Red Dot Design Award is one of the largest and most important design awards, honoring the exceptional quality of the world's best design products since 1954. Red Dot award-winning products are always characterized by a high degree of innovation and superior quality. Features list One touch is enough to get hot water at the right time The first gas water heater with a refined modern design, equipped as standard with a technology that allows connectivity to smart devices in the home via Bluetooth connection. Exclusive design The Therm 6000i S water heater stands out for its innovative, refined and exclusive design: the front in tempered glass, which you can choose in both the black and white versions, the integrated digital display with soft touch control and the absolute small size sleepvit for this type of product. By choosing endTherm 6000i S you will be able to enrich your home with an unprecedented element of design furniture, also suitable for the most modern and elegant rooms. Intuitive use The digital display of Therm 6000i S immediately shows the hi-tech aspect of the water heater and is simple and intuitive to use. Through the display it is possible to manage the desired water temperature by clicking on the raise/lower arrows visible next to the current temperature value. Check via app The Therm 6000i S water heater can also be controlled via its Bosch Water app using smart devices (smartphones and tablets) connected via Bluetooth,¸. The app makes additional functions available, in addition to setting the water temperature, such as: logs of the last five consumptions to find out your water and gas costs, diagnostics in case of malfunctions and direct contact with our Heating Technical Assistance Service. Comfort and savings in respect of the environment Gradual temperature regulation allows you to save up to 60 liters of water and up to 35% of gas. These savings are favored by the Smart Hydraulics valve, which allows the selected temperature to be reached more quickly and increases its stability: no more showers with sudden changes in temperature between hot and cold! Gas combustion to produce hot water is optimized thanks to a patented algorithm, OptiFlow, which automatically calculates the combustion air flow based on the power absorbed by the fan and its rotation speed. This guarantees optimum efficiency of the appliance in all operating conditions, the reduction of the minimum power and the avoidance of the risk of condensation forming on the heat exchanger. Summary of technical characteristics Electronic ignition gas water heater available for butane/propane natural gas and in 12 and 15 litres/min versions Controlle temperature regulation grad by grad Efficiency optimized for savings of up to 1.5 liters of water each time the tap is opened final 35% of gas Motorized water valve and hydraulic bypass for the best possible temperature stability and maximum comfort Compatible with solar thermal systems Dimensions and weight (623 x 300 x 195 mm - 13 kg) The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating systems for the production of hot water must comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of appliances, favoring comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating the production of domestic hot water. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding underperforming technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to better understand the characteristics of the system, acquire greater awareness of energy saving, allowing him to choose better what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the first is supplied by the manufacturer together with the product for heating/domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing for an increase in the score attributed to each appliance and increasing the energy class of the system: therefore, it is the task of those who make/install the system to provide the consumer with the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on consumption in the home, approximately 80% of which is due to heating and the production of hot water, and are now tax-incentivized. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the orientamental futur that has always distinguished the brand. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER RINNAI CONTINUUM 11i INTERNAL METHANE. 2 - FORCED DRAFT Sealed Chamber Water Heaters, COMPLETE WITH FUME EXHAUST KIT - ErP Energy class A Technical specifications Energy label specifications according to the European ErP directive Sanitary Energy Efficiency ACS: Class A Declared loader profile: M Characteristics of heating/DHW operation: Code: REU-1110FFU-NG Gas instantaneous water heater 2 - Forced flow sealed chamber water heaters Ignition: Electronic flame ionization, direct Installation: Indoor / outdoor protected Dimensions: mm 675 hx 370 wx 138 d; 16 Kgs Selectable temperatures on the control panel: C 35,37-48,50,55,60 Thermal inputs (min/max): 6.1 / 21.6 kW Hydraulic flow rate (min/max): 2.4 / 11 l/min Nominal water pressure (Pw): bar 0.7 - 10.0 (recommended 2.0 min) Electric consumption: Watts 50 normal / 8 stand-by Noise level: db(A) 46 Protection factor: IPx4 METHANE version Main features RINNAI GAS WATER HEATER: CONTINUUM Continuum the basic line of Rinnai. The code REU-1110FFU Continuum is the indoor water heater for domestic use which combines the smallest dimensions with high-performance technology for the instantaneous production of domestic hot water. Pleasant in design and designed to guarantee absolute safety, thanks to the 2 - Sealed Chamber Water Heaters, Continuum, ideal for the production of DHW in private homes. Equipped with display (not removable) for temperature management and self-diagnosis. Anti-corrosion enamelled stainless steel casing. Unlimited hot water without sudden changes in temperature Electronic ignition without pilot flame Temperature control to the degree Free testing, carried out by an authorized Rinnai technical assistance centre Shape memory alloy: the membrane inside the water group changes shape according to the temperature, determining the water flow in transit and the outlet temperature Characteristics: DESIGN Continuum comes with an essential and elegant design. It is super-slim, and thanks to its only 14cm thickness it can be installed even in the tightest spaces. The elongated front panel, ideal for hiding the hydraulic fittings and allowing for visible installation, is combined with a backlit digital control panel, which guarantees functionality and ease of use SAVING Thanks to the electronic ignition, which eliminates the pilot flame, and to the possibility of setting the desired temperature electronically, it is possible to obtain up to 25% savings on gas consumption. Fan and internal gas valve are in continuous modulation: determining how much fuel (air) and how much fuel (gas) must be used to obtain optimal combustion, which is the necessary condition to avoid waste and reduce polluting emissions. SAFETY Rinnai always pays great attention to safety: Continuum an appliance 2 - Sealed chamber water heaters. This means that it has no interchange with the environment in which it is installed. It draws air from the outside and expels the burnt fumes through a fan always in an outside environment (and thus avoids the risk of carbon monoxide poisoning). The electronic temperature control ensures that the appliance switches off if the outlet water temperature exceeds the one selected on the control panel by even just 3 degrees: this protects weak users from the risk of burns. The pre and post ventilation procedure, which cleans the combustion chamber and cools it at each ignition and shutdown cycle, preserves the life of the appliance and optimizes the combustion values. DESIGN AND FUNCTIONALITY Rinnai Continuum is distinguished by a clean and minimal line. The command on the machine, simple and intuitive, allows you to consult the water heater stat displayed on the practical digital display. The temperature is regulated by means of increase and decrease buttons, thus overcoming the approximation of the knobs, typical of a now obsolete technology. It is possible to select up to 16 different temperatures, starting from 35C, up to 60C. COMPACT AND SILENT Rinnai Continuum can be installed not only in the boiler room, but also in the living spaces of the house, such as bathrooms and kitchens, thanks to its compact size and low noise level (lower than the sound level of a normal conversation). ROBUST AND RELIABLE Rinnai Continuum is built with excellent quality materials and components, which make it a reliable and durable product. The external panels in enamelled-corrosion steel, the copper exchanger (for better heat conduction and greater hygiene), the probes are immersion (to know the temperature of the water supplied with precision to the degree). SHAPE MEMORY ALLOY the technology literally changes shape, the membrane inside the water unit changes shape according to the temperature, determining the flow of water in transit by controlling the outlet temperature. In this way it is possible to guarantee superior sanitary comfort and stability in the supply of hot water. TECHNIQUE AND RELIABILITY Rinnai Continuum equipped with fan and modulating gas valve to guarantee the correct air/gas inside the combustion chamber and therefore greater efficiency and lower polluting emissions. Rinnai Continuum is extremely versatile and, starting from 0.7 bar, it can also be installed where there are low hydraulic pressures. Thanks to the fan's electronic control, the appliance is able to detect the presence of obstructions and impediments to the correct expulsion of the combustion products and signal it, guaranteeing the safety of the rooms in which it is installed. INSTALLATION Rinnai Continuum is available both for use with natural gas and LPG (liquid gas) and can be installed both indoors and outdoors, albeit partially protected in temperate climates.* Continuum can be easily installed thanks to the special brackets with central fork. A single screw in the wall allows you to hang the fixture easily and proceed at a later time to set up the final fixing brackets, without having to simultaneously support the weight of the fixture itself. The coaxial flue is 60/100 cm and can reach a maximum length of 2.2 linear metres. ErP Ready Rinnai's commitment to a sustainable future. For this reason, all our products are "ERP Ready" or in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-design. The Directive establishes very precise reference points for the manufacture of environmentally friendly products and defines the mandatory minimum requirements of energy and environmental performance for energy-consuming instruments. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energy on final consumption of 20% From 26 September 2015, appliances for winter air conditioning and the production of domestic hot water are accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD Labeling Directive (2010/30/EC) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to give its contribution to an eco-sustainable world Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

OFFER - Immergas CAESAR EXTRA 11 CS Gas Gpl cod. 3.028687 low NOx ErP Efficiency class Heating efficiency class A Sanitary efficiency class M Sanitary Rated power min/max kW 19.3 Hot water production (∆T 25 °C) l/min* 11 generals Approved for outdoor use in a partially protected place Electronic ignition Dimensions (HxWxD) mm 619 x 304 x 243 CAESAR EXTRA Instantaneous water heater with sealed chamber , low NOx, for outdoors Low NOx combustion system Approved for outdoor installation only in a partially protected place Standard antifreeze resistance up to -15 °C They do not require a flue Electronic ignition and modulation Equipped with LCD display and encoder knob Solar function for combination with solar thermal systems Excellent hydraulic sensitivity with minimum operating water pressure Fixing dowels and standard bracket Optional connection unit IPX5D electrical protection degree Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less